{-# LANGUAGE FlexibleContexts #-} -- | -- Module : Statistics.Sample -- Copyright : (c) 2008 Don Stewart, 2009 Bryan O'Sullivan -- License : BSD3 -- -- Maintainer : bos@serpentine.com -- Stability : experimental -- Portability : portable -- -- Commonly used sample statistics, also known as descriptive -- statistics. module Statistics.Sample ( -- * Types Sample , WeightedSample -- * Descriptive functions , range -- * Statistics of location , mean , welfordMean , meanWeighted , harmonicMean , geometricMean -- * Statistics of dispersion -- $variance -- ** Functions over central moments , centralMoment , centralMoments , skewness , kurtosis -- ** Two-pass functions (numerically robust) -- $robust , variance , varianceUnbiased , meanVariance , meanVarianceUnb , stdDev , varianceWeighted -- ** Single-pass functions (faster, less safe) -- $cancellation , fastVariance , fastVarianceUnbiased , fastStdDev -- * Joint distirbutions , covariance , correlation , pair -- * References -- $references ) where import Statistics.Function (minMax) import Statistics.Sample.Internal (robustSumVar, sum) import Statistics.Types (Sample,WeightedSample) import qualified Data.Vector as V import qualified Data.Vector.Generic as G import qualified Data.Vector.Unboxed as U -- Operator ^ will be overriden import Prelude hiding ((^), sum) -- | /O(n)/ Range. The difference between the largest and smallest -- elements of a sample. range :: (G.Vector v Double) => v Double -> Double range s = hi - lo where (lo , hi) = minMax s {-# INLINE range #-} -- | /O(n)/ Arithmetic mean. This uses Kahan-Babuška-Neumaier -- summation, so is more accurate than 'welfordMean' unless the input -- values are very large. mean :: (G.Vector v Double) => v Double -> Double mean xs = sum xs / fromIntegral (G.length xs) {-# SPECIALIZE mean :: U.Vector Double -> Double #-} {-# SPECIALIZE mean :: V.Vector Double -> Double #-} -- | /O(n)/ Arithmetic mean. This uses Welford's algorithm to provide -- numerical stability, using a single pass over the sample data. -- -- Compared to 'mean', this loses a surprising amount of precision -- unless the inputs are very large. welfordMean :: (G.Vector v Double) => v Double -> Double welfordMean = fini . G.foldl' go (T 0 0) where fini (T a _) = a go (T m n) x = T m' n' where m' = m + (x - m) / fromIntegral n' n' = n + 1 {-# SPECIALIZE welfordMean :: U.Vector Double -> Double #-} {-# SPECIALIZE welfordMean :: V.Vector Double -> Double #-} -- | /O(n)/ Arithmetic mean for weighted sample. It uses a single-pass -- algorithm analogous to the one used by 'welfordMean'. meanWeighted :: (G.Vector v (Double,Double)) => v (Double,Double) -> Double meanWeighted = fini . G.foldl' go (V 0 0) where fini (V a _) = a go (V m w) (x,xw) = V m' w' where m' | w' == 0 = 0 | otherwise = m + xw * (x - m) / w' w' = w + xw {-# INLINE meanWeighted #-} -- | /O(n)/ Harmonic mean. This algorithm performs a single pass over -- the sample. harmonicMean :: (G.Vector v Double) => v Double -> Double harmonicMean = fini . G.foldl' go (T 0 0) where fini (T b a) = fromIntegral a / b go (T x y) n = T (x + (1/n)) (y+1) {-# INLINE harmonicMean #-} -- | /O(n)/ Geometric mean of a sample containing no negative values. geometricMean :: (G.Vector v Double) => v Double -> Double geometricMean = exp . mean . G.map log {-# INLINE geometricMean #-} -- | Compute the /k/th central moment of a sample. The central moment -- is also known as the moment about the mean. -- -- This function performs two passes over the sample, so is not subject -- to stream fusion. -- -- For samples containing many values very close to the mean, this -- function is subject to inaccuracy due to catastrophic cancellation. centralMoment :: (G.Vector v Double) => Int -> v Double -> Double centralMoment a xs | a < 0 = error "Statistics.Sample.centralMoment: negative input" | a == 0 = 1 | a == 1 = 0 | otherwise = sum (G.map go xs) / fromIntegral (G.length xs) where go x = (x-m) ^ a m = mean xs {-# SPECIALIZE centralMoment :: Int -> U.Vector Double -> Double #-} {-# SPECIALIZE centralMoment :: Int -> V.Vector Double -> Double #-} -- | Compute the /k/th and /j/th central moments of a sample. -- -- This function performs two passes over the sample, so is not subject -- to stream fusion. -- -- For samples containing many values very close to the mean, this -- function is subject to inaccuracy due to catastrophic cancellation. centralMoments :: (G.Vector v Double) => Int -> Int -> v Double -> (Double, Double) centralMoments a b xs | a < 2 || b < 2 = (centralMoment a xs , centralMoment b xs) | otherwise = fini . G.foldl' go (V 0 0) $ xs where go (V i j) x = V (i + d^a) (j + d^b) where d = x - m fini (V i j) = (i / n , j / n) m = mean xs n = fromIntegral (G.length xs) {-# SPECIALIZE centralMoments :: Int -> Int -> U.Vector Double -> (Double, Double) #-} {-# SPECIALIZE centralMoments :: Int -> Int -> V.Vector Double -> (Double, Double) #-} -- | Compute the skewness of a sample. This is a measure of the -- asymmetry of its distribution. -- -- A sample with negative skew is said to be /left-skewed/. Most of -- its mass is on the right of the distribution, with the tail on the -- left. -- -- > skewness $ U.to [1,100,101,102,103] -- > ==> -1.497681449918257 -- -- A sample with positive skew is said to be /right-skewed/. -- -- > skewness $ U.to [1,2,3,4,100] -- > ==> 1.4975367033335198 -- -- A sample's skewness is not defined if its 'variance' is zero. -- -- This function performs two passes over the sample, so is not subject -- to stream fusion. -- -- For samples containing many values very close to the mean, this -- function is subject to inaccuracy due to catastrophic cancellation. skewness :: (G.Vector v Double) => v Double -> Double skewness xs = c3 * c2 ** (-1.5) where (c3 , c2) = centralMoments 3 2 xs {-# SPECIALIZE skewness :: U.Vector Double -> Double #-} {-# SPECIALIZE skewness :: V.Vector Double -> Double #-} -- | Compute the excess kurtosis of a sample. This is a measure of -- the \"peakedness\" of its distribution. A high kurtosis indicates -- that more of the sample's variance is due to infrequent severe -- deviations, rather than more frequent modest deviations. -- -- A sample's excess kurtosis is not defined if its 'variance' is -- zero. -- -- This function performs two passes over the sample, so is not subject -- to stream fusion. -- -- For samples containing many values very close to the mean, this -- function is subject to inaccuracy due to catastrophic cancellation. kurtosis :: (G.Vector v Double) => v Double -> Double kurtosis xs = c4 / (c2 * c2) - 3 where (c4 , c2) = centralMoments 4 2 xs {-# SPECIALIZE kurtosis :: U.Vector Double -> Double #-} {-# SPECIALIZE kurtosis :: V.Vector Double -> Double #-} -- $variance -- -- The variance—and hence the standard deviation—of a -- sample of fewer than two elements are both defined to be zero. -- $robust -- -- These functions use the compensated summation algorithm of Chan et -- al. for numerical robustness, but require two passes over the -- sample data as a result. -- -- Because of the need for two passes, these functions are /not/ -- subject to stream fusion. data V = V {-# UNPACK #-} !Double {-# UNPACK #-} !Double -- | Maximum likelihood estimate of a sample's variance. Also known -- as the population variance, where the denominator is /n/. variance :: (G.Vector v Double) => v Double -> Double variance samp | n > 1 = robustSumVar (mean samp) samp / fromIntegral n | otherwise = 0 where n = G.length samp {-# SPECIALIZE variance :: U.Vector Double -> Double #-} {-# SPECIALIZE variance :: V.Vector Double -> Double #-} -- | Unbiased estimate of a sample's variance. Also known as the -- sample variance, where the denominator is /n/-1. varianceUnbiased :: (G.Vector v Double) => v Double -> Double varianceUnbiased samp | n > 1 = robustSumVar (mean samp) samp / fromIntegral (n-1) | otherwise = 0 where n = G.length samp {-# SPECIALIZE varianceUnbiased :: U.Vector Double -> Double #-} {-# SPECIALIZE varianceUnbiased :: V.Vector Double -> Double #-} -- | Calculate mean and maximum likelihood estimate of variance. This -- function should be used if both mean and variance are required -- since it will calculate mean only once. meanVariance :: (G.Vector v Double) => v Double -> (Double,Double) meanVariance samp | n > 1 = (m, robustSumVar m samp / fromIntegral n) | otherwise = (m, 0) where n = G.length samp m = mean samp {-# SPECIALIZE meanVariance :: U.Vector Double -> (Double,Double) #-} {-# SPECIALIZE meanVariance :: V.Vector Double -> (Double,Double) #-} -- | Calculate mean and unbiased estimate of variance. This -- function should be used if both mean and variance are required -- since it will calculate mean only once. meanVarianceUnb :: (G.Vector v Double) => v Double -> (Double,Double) meanVarianceUnb samp | n > 1 = (m, robustSumVar m samp / fromIntegral (n-1)) | otherwise = (m, 0) where n = G.length samp m = mean samp {-# SPECIALIZE meanVarianceUnb :: U.Vector Double -> (Double,Double) #-} {-# SPECIALIZE meanVarianceUnb :: V.Vector Double -> (Double,Double) #-} -- | Standard deviation. This is simply the square root of the -- unbiased estimate of the variance. stdDev :: (G.Vector v Double) => v Double -> Double stdDev = sqrt . varianceUnbiased {-# SPECIALIZE stdDev :: U.Vector Double -> Double #-} {-# SPECIALIZE stdDev :: V.Vector Double -> Double #-} robustSumVarWeighted :: (G.Vector v (Double,Double)) => v (Double,Double) -> V robustSumVarWeighted samp = G.foldl' go (V 0 0) samp where go (V s w) (x,xw) = V (s + xw*d*d) (w + xw) where d = x - m m = meanWeighted samp {-# INLINE robustSumVarWeighted #-} -- | Weighted variance. This is biased estimation. varianceWeighted :: (G.Vector v (Double,Double)) => v (Double,Double) -> Double varianceWeighted samp | G.length samp > 1 = fini $ robustSumVarWeighted samp | otherwise = 0 where fini (V s w) = s / w {-# SPECIALIZE varianceWeighted :: U.Vector (Double,Double) -> Double #-} {-# SPECIALIZE varianceWeighted :: V.Vector (Double,Double) -> Double #-} -- $cancellation -- -- The functions prefixed with the name @fast@ below perform a single -- pass over the sample data using Knuth's algorithm. They usually -- work well, but see below for caveats. These functions are subject -- to array fusion. -- -- /Note/: in cases where most sample data is close to the sample's -- mean, Knuth's algorithm gives inaccurate results due to -- catastrophic cancellation. fastVar :: (G.Vector v Double) => v Double -> T1 fastVar = G.foldl' go (T1 0 0 0) where go (T1 n m s) x = T1 n' m' s' where n' = n + 1 m' = m + d / fromIntegral n' s' = s + d * (x - m') d = x - m -- | Maximum likelihood estimate of a sample's variance. fastVariance :: (G.Vector v Double) => v Double -> Double fastVariance = fini . fastVar where fini (T1 n _m s) | n > 1 = s / fromIntegral n | otherwise = 0 {-# INLINE fastVariance #-} -- | Unbiased estimate of a sample's variance. fastVarianceUnbiased :: (G.Vector v Double) => v Double -> Double fastVarianceUnbiased = fini . fastVar where fini (T1 n _m s) | n > 1 = s / fromIntegral (n - 1) | otherwise = 0 {-# INLINE fastVarianceUnbiased #-} -- | Standard deviation. This is simply the square root of the -- maximum likelihood estimate of the variance. fastStdDev :: (G.Vector v Double) => v Double -> Double fastStdDev = sqrt . fastVariance {-# INLINE fastStdDev #-} -- | Covariance of sample of pairs. For empty sample it's set to -- zero covariance :: (G.Vector v (Double,Double), G.Vector v Double) => v (Double,Double) -> Double covariance xy | n == 0 = 0 | otherwise = mean $ G.zipWith (*) (G.map (\x -> x - muX) xs) (G.map (\y -> y - muY) ys) where n = G.length xy (xs,ys) = G.unzip xy muX = mean xs muY = mean ys {-# SPECIALIZE covariance :: U.Vector (Double,Double) -> Double #-} {-# SPECIALIZE covariance :: V.Vector (Double,Double) -> Double #-} -- | Correlation coefficient for sample of pairs. Also known as -- Pearson's correlation. For empty sample it's set to zero. correlation :: (G.Vector v (Double,Double), G.Vector v Double) => v (Double,Double) -> Double correlation xy | n == 0 = 0 | otherwise = cov / sqrt (varX * varY) where n = G.length xy (xs,ys) = G.unzip xy (muX,varX) = meanVariance xs (muY,varY) = meanVariance ys cov = mean $ G.zipWith (*) (G.map (\x -> x - muX) xs) (G.map (\y -> y - muY) ys) {-# SPECIALIZE correlation :: U.Vector (Double,Double) -> Double #-} {-# SPECIALIZE correlation :: V.Vector (Double,Double) -> Double #-} -- | Pair two samples. It's like 'G.zip' but requires that both -- samples have equal size. pair :: (G.Vector v a, G.Vector v b, G.Vector v (a,b)) => v a -> v b -> v (a,b) pair va vb | G.length va == G.length vb = G.zip va vb | otherwise = error "Statistics.Sample.pair: vector must have same length" {-# INLINE pair #-} ------------------------------------------------------------------------ -- Helper code. Monomorphic unpacked accumulators. -- (^) operator from Prelude is just slow. (^) :: Double -> Int -> Double x ^ 1 = x x ^ n = x * (x ^ (n-1)) {-# INLINE (^) #-} -- don't support polymorphism, as we can't get unboxed returns if we use it. data T = T {-# UNPACK #-}!Double {-# UNPACK #-}!Int data T1 = T1 {-# UNPACK #-}!Int {-# UNPACK #-}!Double {-# UNPACK #-}!Double {- Consider this core: with data T a = T !a !Int $wfold :: Double# -> Int# -> Int# -> (# Double, Int# #) and without, $wfold :: Double# -> Int# -> Int# -> (# Double#, Int# #) yielding to boxed returns and heap checks. -} -- $references -- -- * Chan, T. F.; Golub, G.H.; LeVeque, R.J. (1979) Updating formulae -- and a pairwise algorithm for computing sample -- variances. Technical Report STAN-CS-79-773, Department of -- Computer Science, Stanford -- University. <ftp://reports.stanford.edu/pub/cstr/reports/cs/tr/79/773/CS-TR-79-773.pdf> -- -- * Knuth, D.E. (1998) The art of computer programming, volume 2: -- seminumerical algorithms, 3rd ed., p. 232. -- -- * Welford, B.P. (1962) Note on a method for calculating corrected -- sums of squares and products. /Technometrics/ -- 4(3):419–420. <http://www.jstor.org/stable/1266577> -- -- * West, D.H.D. (1979) Updating mean and variance estimates: an -- improved method. /Communications of the ACM/ -- 22(9):532–535. <http://doi.acm.org/10.1145/359146.359153>