Safe Haskell  Safe 

Language  Haskell2010 
This names exported by this module are closely modeled on those in Prelude
and Data.List
,
but also on
Pipes.Prelude,
Pipes.Group
and Pipes.Parse.
The module may be said to give independent expression to the conception of
Producer / Source / Generator manipulation
articulated in the latter two modules. Because we dispense with piping and
conduiting, the distinction between all of these modules collapses. Some things are
lost but much is gained: on the one hand, everything comes much closer to ordinary
beginning Haskell programming and, on the other, acquires the plasticity of programming
directly with a general free monad type. The leading type, Stream (Of a) m r
is chosen to permit an api
that is as close as possible to that of Data.List
and the Prelude
.
Import qualified thus:
import Streaming import qualified Streaming.Prelude as S
For the examples below, one sometimes needs
import Streaming.Prelude (each, yield, next, mapped, stdoutLn, stdinLn) import Data.Function ((&))
Other libraries that come up in passing are
import qualified Control.Foldl as L  cabal install foldl import qualified Pipes as P import qualified Pipes.Prelude as P import qualified System.IO as IO
Here are some correspondences between the types employed here and elsewhere:
streaming  pipes  conduit  iostreams  Stream (Of a) m ()  Producer a m ()  Source m a  InputStream a  ListT m a  ConduitM () o m ()  Generator r ()  Stream (Of a) m r  Producer a m r  ConduitM () o m r  Generator a r  Stream (Of a) m (Stream (Of a) m r)  Producer a m (Producer a m r)   Stream (Stream (Of a) m) r  FreeT (Producer a m) m r    ByteString m ()  Producer ByteString m ()  Source m ByteString  InputStream ByteString 
 data Of a b = !a :> b
 yield :: Monad m => a > Stream (Of a) m ()
 each :: (Monad m, Foldable f) => f a > Stream (Of a) m ()
 stdinLn :: MonadIO m => Stream (Of String) m ()
 readLn :: (MonadIO m, Read a) => Stream (Of a) m ()
 fromHandle :: MonadIO m => Handle > Stream (Of String) m ()
 iterate :: Monad m => (a > a) > a > Stream (Of a) m r
 iterateM :: Monad m => (a > m a) > m a > Stream (Of a) m r
 repeat :: Monad m => a > Stream (Of a) m r
 repeatM :: Monad m => m a > Stream (Of a) m r
 replicate :: Monad m => Int > a > Stream (Of a) m ()
 untilRight :: Monad m => m (Either a r) > Stream (Of a) m r
 cycle :: (Monad m, Functor f) => Stream f m r > Stream f m s
 replicateM :: Monad m => Int > m a > Stream (Of a) m ()
 enumFrom :: (Monad m, Enum n) => n > Stream (Of n) m r
 enumFromThen :: (Monad m, Enum a) => a > a > Stream (Of a) m r
 unfoldr :: Monad m => (s > m (Either r (a, s))) > s > Stream (Of a) m r
 stdoutLn :: MonadIO m => Stream (Of String) m () > m ()
 stdoutLn' :: MonadIO m => Stream (Of String) m r > m r
 mapM_ :: Monad m => (a > m b) > Stream (Of a) m r > m r
 print :: (MonadIO m, Show a) => Stream (Of a) m r > m r
 toHandle :: MonadIO m => Handle > Stream (Of String) m r > m r
 effects :: Monad m => Stream (Of a) m r > m r
 erase :: Monad m => Stream (Of a) m r > Stream Identity m r
 drained :: (Monad m, Monad (t m), MonadTrans t) => t m (Stream (Of a) m r) > t m r
 map :: Monad m => (a > b) > Stream (Of a) m r > Stream (Of b) m r
 mapM :: Monad m => (a > m b) > Stream (Of a) m r > Stream (Of b) m r
 maps :: (Monad m, Functor f) => (forall x. f x > g x) > Stream f m r > Stream g m r
 mapsPost :: forall m f g r. (Monad m, Functor g) => (forall x. f x > g x) > Stream f m r > Stream g m r
 mapped :: (Monad m, Functor f) => (forall x. f x > m (g x)) > Stream f m r > Stream g m r
 mappedPost :: (Monad m, Functor g) => (forall x. f x > m (g x)) > Stream f m r > Stream g m r
 for :: (Monad m, Functor f) => Stream (Of a) m r > (a > Stream f m x) > Stream f m r
 with :: (Monad m, Functor f) => Stream (Of a) m r > (a > f x) > Stream f m r
 subst :: (Monad m, Functor f) => (a > f x) > Stream (Of a) m r > Stream f m r
 copy :: Monad m => Stream (Of a) m r > Stream (Of a) (Stream (Of a) m) r
 duplicate :: Monad m => Stream (Of a) m r > Stream (Of a) (Stream (Of a) m) r
 store :: Monad m => (Stream (Of a) (Stream (Of a) m) r > t) > Stream (Of a) m r > t
 chain :: Monad m => (a > m ()) > Stream (Of a) m r > Stream (Of a) m r
 sequence :: Monad m => Stream (Of (m a)) m r > Stream (Of a) m r
 filter :: Monad m => (a > Bool) > Stream (Of a) m r > Stream (Of a) m r
 filterM :: Monad m => (a > m Bool) > Stream (Of a) m r > Stream (Of a) m r
 mapMaybeM :: Monad m => (a > m (Maybe b)) > Stream (Of a) m r > Stream (Of b) m r
 delay :: MonadIO m => Double > Stream (Of a) m r > Stream (Of a) m r
 intersperse :: Monad m => a > Stream (Of a) m r > Stream (Of a) m r
 take :: (Monad m, Functor f) => Int > Stream f m r > Stream f m ()
 takeWhile :: Monad m => (a > Bool) > Stream (Of a) m r > Stream (Of a) m ()
 takeWhileM :: Monad m => (a > m Bool) > Stream (Of a) m r > Stream (Of a) m ()
 drop :: Monad m => Int > Stream (Of a) m r > Stream (Of a) m r
 dropWhile :: Monad m => (a > Bool) > Stream (Of a) m r > Stream (Of a) m r
 concat :: (Monad m, Foldable f) => Stream (Of (f a)) m r > Stream (Of a) m r
 scan :: Monad m => (x > a > x) > x > (x > b) > Stream (Of a) m r > Stream (Of b) m r
 scanM :: Monad m => (x > a > m x) > m x > (x > m b) > Stream (Of a) m r > Stream (Of b) m r
 scanned :: Monad m => (x > a > x) > x > (x > b) > Stream (Of a) m r > Stream (Of (a, b)) m r
 read :: (Monad m, Read a) => Stream (Of String) m r > Stream (Of a) m r
 show :: (Monad m, Show a) => Stream (Of a) m r > Stream (Of String) m r
 cons :: Monad m => a > Stream (Of a) m r > Stream (Of a) m r
 slidingWindow :: Monad m => Int > Stream (Of a) m b > Stream (Of (Seq a)) m b
 next :: Monad m => Stream (Of a) m r > m (Either r (a, Stream (Of a) m r))
 uncons :: Monad m => Stream (Of a) m r > m (Maybe (a, Stream (Of a) m r))
 splitAt :: (Monad m, Functor f) => Int > Stream f m r > Stream f m (Stream f m r)
 split :: (Eq a, Monad m) => a > Stream (Of a) m r > Stream (Stream (Of a) m) m r
 breaks :: Monad m => (a > Bool) > Stream (Of a) m r > Stream (Stream (Of a) m) m r
 break :: Monad m => (a > Bool) > Stream (Of a) m r > Stream (Of a) m (Stream (Of a) m r)
 breakWhen :: Monad m => (x > a > x) > x > (x > b) > (b > Bool) > Stream (Of a) m r > Stream (Of a) m (Stream (Of a) m r)
 span :: Monad m => (a > Bool) > Stream (Of a) m r > Stream (Of a) m (Stream (Of a) m r)
 group :: (Monad m, Eq a) => Stream (Of a) m r > Stream (Stream (Of a) m) m r
 groupBy :: Monad m => (a > a > Bool) > Stream (Of a) m r > Stream (Stream (Of a) m) m r
 distinguish :: (a > Bool) > Of a r > Sum (Of a) (Of a) r
 switch :: Sum f g r > Sum g f r
 separate :: (Monad m, Functor f, Functor g) => Stream (Sum f g) m r > Stream f (Stream g m) r
 unseparate :: (Monad m, Functor f, Functor g) => Stream f (Stream g m) r > Stream (Sum f g) m r
 eitherToSum :: Of (Either a b) r > Sum (Of a) (Of b) r
 sumToEither :: Sum (Of a) (Of b) r > Of (Either a b) r
 sumToCompose :: Sum f f r > Compose (Of Bool) f r
 composeToSum :: Compose (Of Bool) f r > Sum f f r
 fold :: Monad m => (x > a > x) > x > (x > b) > Stream (Of a) m r > m (Of b r)
 fold_ :: Monad m => (x > a > x) > x > (x > b) > Stream (Of a) m r > m b
 foldM :: Monad m => (x > a > m x) > m x > (x > m b) > Stream (Of a) m r > m (Of b r)
 foldM_ :: Monad m => (x > a > m x) > m x > (x > m b) > Stream (Of a) m r > m b
 all :: Monad m => (a > Bool) > Stream (Of a) m r > m (Of Bool r)
 all_ :: Monad m => (a > Bool) > Stream (Of a) m r > m Bool
 any :: Monad m => (a > Bool) > Stream (Of a) m r > m (Of Bool r)
 any_ :: Monad m => (a > Bool) > Stream (Of a) m r > m Bool
 sum :: (Monad m, Num a) => Stream (Of a) m r > m (Of a r)
 sum_ :: (Monad m, Num a) => Stream (Of a) m () > m a
 product :: (Monad m, Num a) => Stream (Of a) m r > m (Of a r)
 product_ :: (Monad m, Num a) => Stream (Of a) m () > m a
 head :: Monad m => Stream (Of a) m r > m (Of (Maybe a) r)
 head_ :: Monad m => Stream (Of a) m r > m (Maybe a)
 last :: Monad m => Stream (Of a) m r > m (Of (Maybe a) r)
 last_ :: Monad m => Stream (Of a) m r > m (Maybe a)
 elem :: (Monad m, Eq a) => a > Stream (Of a) m r > m (Of Bool r)
 elem_ :: (Monad m, Eq a) => a > Stream (Of a) m r > m Bool
 notElem :: (Monad m, Eq a) => a > Stream (Of a) m r > m (Of Bool r)
 notElem_ :: (Monad m, Eq a) => a > Stream (Of a) m r > m Bool
 length :: Monad m => Stream (Of a) m r > m (Of Int r)
 length_ :: Monad m => Stream (Of a) m r > m Int
 toList :: Monad m => Stream (Of a) m r > m (Of [a] r)
 toList_ :: Monad m => Stream (Of a) m () > m [a]
 mconcat :: (Monad m, Monoid w) => Stream (Of w) m r > m (Of w r)
 mconcat_ :: (Monad m, Monoid w) => Stream (Of w) m r > m w
 minimum :: (Monad m, Ord a) => Stream (Of a) m r > m (Of (Maybe a) r)
 minimum_ :: (Monad m, Ord a) => Stream (Of a) m r > m (Maybe a)
 maximum :: (Monad m, Ord a) => Stream (Of a) m r > m (Of (Maybe a) r)
 maximum_ :: (Monad m, Ord a) => Stream (Of a) m r > m (Maybe a)
 foldrM :: Monad m => (a > m r > m r) > Stream (Of a) m r > m r
 foldrT :: (Monad m, MonadTrans t, Monad (t m)) => (a > t m r > t m r) > Stream (Of a) m r > t m r
 zip :: Monad m => Stream (Of a) m r > Stream (Of b) m r > Stream (Of (a, b)) m r
 zipWith :: Monad m => (a > b > c) > Stream (Of a) m r > Stream (Of b) m r > Stream (Of c) m r
 zip3 :: Monad m => Stream (Of a) m r > Stream (Of b) m r > Stream (Of c) m r > Stream (Of (a, b, c)) m r
 zipWith3 :: Monad m => (a > b > c > d) > Stream (Of a) m r > Stream (Of b) m r > Stream (Of c) m r > Stream (Of d) m r
 unzip :: Monad m => Stream (Of (a, b)) m r > Stream (Of a) (Stream (Of b) m) r
 partitionEithers :: Monad m => Stream (Of (Either a b)) m r > Stream (Of a) (Stream (Of b) m) r
 partition :: Monad m => (a > Bool) > Stream (Of a) m r > Stream (Of a) (Stream (Of a) m) r
 catMaybes :: Monad m => Stream (Of (Maybe a)) m r > Stream (Of a) m r
 mapMaybe :: Monad m => (a > Maybe b) > Stream (Of a) m r > Stream (Of b) m r
 lazily :: Of a b > (a, b)
 strictly :: (a, b) > Of a b
 fst' :: Of a b > a
 snd' :: Of a b > b
 mapOf :: (a > b) > Of a r > Of b r
 _first :: Functor f => (a > f a') > Of a b > f (Of a' b)
 _second :: Functor f => (b > f b') > Of a b > f (Of a b')
 reread :: Monad m => (s > m (Maybe a)) > s > Stream (Of a) m ()
 data Stream f m r
Types
A leftstrict pair; the base functor for streams of individual elements.
!a :> b infixr 5 
Bifunctor Of Source #  
Eq2 Of Source #  
Ord2 Of Source #  
Show2 Of Source #  
Monoid a => Monad (Of a) Source #  
Functor (Of a) Source #  
Monoid a => Applicative (Of a) Source #  
Foldable (Of a) Source #  
Traversable (Of a) Source #  
Eq a => Eq1 (Of a) Source #  
Ord a => Ord1 (Of a) Source #  
Show a => Show1 (Of a) Source #  
Generic1 * (Of a) Source #  
(Eq b, Eq a) => Eq (Of a b) Source #  
(Data b, Data a) => Data (Of a b) Source #  
(Ord b, Ord a) => Ord (Of a b) Source #  
(Read b, Read a) => Read (Of a b) Source #  
(Show b, Show a) => Show (Of a b) Source #  
Generic (Of a b) Source #  
(Semigroup a, Semigroup b) => Semigroup (Of a b) Source #  
(Monoid a, Monoid b) => Monoid (Of a b) Source #  
type Rep1 * (Of a) Source #  
type Rep (Of a b) Source #  
Introducing streams of elements
yield :: Monad m => a > Stream (Of a) m () Source #
A singleton stream
>>>
stdoutLn $ yield "hello"
hello
>>>
S.sum $ do {yield 1; yield 2; yield 3}
6
>>>
let number = lift (putStrLn "Enter a number:") >> lift readLn >>= yield :: Stream (Of Int) IO ()
>>>
S.toList $ do {number; number; number}
Enter a number: 1<Enter> Enter a number: 2<Enter> Enter a number: 3<Enter> [1,2,3] :> ()
each :: (Monad m, Foldable f) => f a > Stream (Of a) m () Source #
Stream the elements of a pure, foldable container.
>>>
S.print $ each [1..3]
1 2 3
stdinLn :: MonadIO m => Stream (Of String) m () Source #
View standard input as a Stream (Of String) m r
. By contrast, stdoutLn
renders a Stream (Of String) m r
to standard output. The names
follow Pipes.Prelude
>>>
stdoutLn stdinLn
hello<Enter> hello world<Enter> world ^CInterrupted.
>>>
stdoutLn $ S.map reverse stdinLn
hello<Enter> olleh world<Enter> dlrow ^CInterrupted.
readLn :: (MonadIO m, Read a) => Stream (Of a) m () Source #
Read values from stdin
, ignoring failed parses.
>>>
:set XTypeApplications
>>>
S.sum $ S.take 2 (S.readLn @IO @Int)
10<Enter> 12<Enter> 22 :> ()
>>>
S.toList $ S.take 2 (S.readLn @IO @Int)
10<Enter> 1@#$%^&*\<Enter> 12<Enter> [10,12] :> ()
iterate :: Monad m => (a > a) > a > Stream (Of a) m r Source #
Iterate a pure function from a seed value, streaming the results forever
iterateM :: Monad m => (a > m a) > m a > Stream (Of a) m r Source #
Iterate a monadic function from a seed value, streaming the results forever
repeat :: Monad m => a > Stream (Of a) m r Source #
Repeat an element ad inf. .
>>>
S.print $ S.take 3 $ S.repeat 1
1 1 1
repeatM :: Monad m => m a > Stream (Of a) m r Source #
Repeat a monadic action ad inf., streaming its results.
>>>
S.toList $ S.take 2 $ repeatM getLine
one<Enter> two<Enter> ["one","two"]
cycle :: (Monad m, Functor f) => Stream f m r > Stream f m s Source #
Cycle repeatedly through the layers of a stream, ad inf. This function is functorgeneral
cycle = forever
>>>
rest < S.print $ S.splitAt 3 $ S.cycle (yield True >> yield False)
True False True>>>
S.print $ S.take 3 rest
False True False
replicateM :: Monad m => Int > m a > Stream (Of a) m () Source #
Repeat an action several times, streaming its results.
>>>
S.print $ S.replicateM 2 getCurrentTime
20150818 00:57:36.124508 UTC 20150818 00:57:36.124785 UTC
enumFrom :: (Monad m, Enum n) => n > Stream (Of n) m r Source #
An infinite stream of enumerable values, starting from a given value.
It is the same as S.iterate succ
.
Because their return type is polymorphic, enumFrom
and enumFromThen
(and iterate
are useful for example with zip
and zipWith
, which require the same return type in the zipped streams.
With each [1..]
the following bit of connectandresume would be impossible:
>>>
rest < S.print $ S.zip (S.enumFrom 'a') $ S.splitAt 3 $ S.enumFrom 1
('a',1) ('b',2) ('c',3)>>>
S.print $ S.take 3 rest
4 5 6
enumFromThen :: (Monad m, Enum a) => a > a > Stream (Of a) m r Source #
An infinite sequence of enumerable values at a fixed distance, determined
by the first and second values. See the discussion of enumFrom
>>>
S.print $ S.take 3 $ S.enumFromThen 100 200
100 200 300
unfoldr :: Monad m => (s > m (Either r (a, s))) > s > Stream (Of a) m r Source #
Build a Stream
by unfolding steps starting from a seed. In particular note
that S.unfoldr S.next = id
.
The seed can of course be anything, but this is one natural way
to consume a pipes
Producer
. Consider:
>>>
S.stdoutLn $ S.take 2 $ S.unfoldr Pipes.next Pipes.stdinLn
hello<Enter> hello goodbye<Enter> goodbye
>>>
S.stdoutLn $ S.unfoldr Pipes.next (Pipes.stdinLn >> Pipes.take 2)
hello<Enter> hello goodbye<Enter> goodbye
>>>
S.effects $ S.unfoldr Pipes.next (Pipes.stdinLn >> Pipes.take 2 >> Pipes.stdoutLn)
hello<Enter> hello goodbye<Enter> goodbye
Pipes.unfoldr S.next
similarly unfolds a Pipes.Producer
from a stream.
Consuming streams of elements
stdoutLn' :: MonadIO m => Stream (Of String) m r > m r Source #
Write String
s to stdout
using putStrLn
Unlike stdoutLn
, stdoutLn'
does not handle a broken output pipe. Thus it can have a polymorphic return
value, rather than ()
, and this kind of "connect and resume" is possible:
>>>
rest < S.stdoutLn' $ S.show $ S.splitAt 3 (each [1..5])
1 2 3>>>
S.toList rest
[4,5] :> ()
mapM_ :: Monad m => (a > m b) > Stream (Of a) m r > m r Source #
Reduce a stream to its return value with a monadic action.
>>>
S.mapM_ Prelude.print $ each [1..3]
1 2 3
>>>
rest < S.mapM_ Prelude.print $ S.splitAt 3 $ each [1..10]
1 2 3>>>
S.sum rest
49 :> ()
print :: (MonadIO m, Show a) => Stream (Of a) m r > m r Source #
Print the elements of a stream as they arise.
>>>
S.print $ S.take 2 S.stdinLn
hello<Enter> "hello" world<Enter> "world">>>
toHandle :: MonadIO m => Handle > Stream (Of String) m r > m r Source #
Write a succession of strings to a handle as separate lines.
>>>
S.toHandle IO.stdout $ each (words "one two three")
one two three
effects :: Monad m => Stream (Of a) m r > m r Source #
Reduce a stream, performing its actions but ignoring its elements.
>>>
rest < S.effects $ S.splitAt 2 $ each [1..5]
>>>
S.print rest
3 4 5
effects
should be understood together with copy
and is subject to the rules
S.effects . S.copy = id hoist S.effects . S.copy = id
The similar effects
and copy
operations in Data.ByteString.Streaming
obey the same rules.
erase :: Monad m => Stream (Of a) m r > Stream Identity m r Source #
Remove the elements from a stream of values, retaining the structure of layers.
drained :: (Monad m, Monad (t m), MonadTrans t) => t m (Stream (Of a) m r) > t m r Source #
Where a transformer returns a stream, run the effects of the stream, keeping the return value. This is usually used at the type
drained :: Monad m => Stream (Of a) m (Stream (Of b) m r) > Stream (Of a) m r drained = join . fmap (lift . effects)
Here, for example, we split a stream in two places and throw out the middle segment:
>>>
rest < S.print $ S.drained $ S.splitAt 2 $ S.splitAt 5 $ each [1..7]
1 2>>>
S.print rest
6 7
In particular, we can define versions of take
and takeWhile
which
retrieve the return value of the rest of the stream  and which can
thus be used with maps
:
take' n = S.drained . S.splitAt n takeWhile' thus = S.drained . S.span thus
Stream transformers
map :: Monad m => (a > b) > Stream (Of a) m r > Stream (Of b) m r Source #
Standard map on the elements of a stream.
>>>
S.stdoutLn $ S.map reverse $ each (words "alpha beta")
ahpla ateb
mapM :: Monad m => (a > m b) > Stream (Of a) m r > Stream (Of b) m r Source #
Replace each element of a stream with the result of a monadic action
>>>
S.print $ S.mapM readIORef $ S.chain (\ior > modifyIORef ior (*100)) $ S.mapM newIORef $ each [1..6]
100 200 300 400 500 600
maps :: (Monad m, Functor f) => (forall x. f x > g x) > Stream f m r > Stream g m r Source #
Map layers of one functor to another with a transformation. Compare
hoist, which has a similar effect on the monadic
parameter.
maps id = id maps f . maps g = maps (f . g)
mapsPost :: forall m f g r. (Monad m, Functor g) => (forall x. f x > g x) > Stream f m r > Stream g m r Source #
Map layers of one functor to another with a transformation. Compare
hoist, which has a similar effect on the monadic
parameter.
mapsPost id = id mapsPost f . mapsPost g = mapsPost (f . g) mapsPost f = mapsPost f
mapsPost
is essentially the same as maps
, but it imposes a Functor
constraint on
its target functor rather than its source functor. It should be preferred if fmap
is cheaper for the target functor than for the source functor.
mapped :: (Monad m, Functor f) => (forall x. f x > m (g x)) > Stream f m r > Stream g m r Source #
Map layers of one functor to another with a transformation involving the base monad. This could be trivial, e.g.
let noteBeginning text x = putStrLn text >> return text
this puts the is completely functorgeneral
maps
and mapped
obey these rules:
maps id = id mapped return = id maps f . maps g = maps (f . g) mapped f . mapped g = mapped (f <=< g) maps f . mapped g = mapped (fmap f . g) mapped f . maps g = mapped (f <=< fmap g)
maps
is more fundamental than mapped
, which is best understood as a convenience
for effecting this frequent composition:
mapped phi = decompose . maps (Compose . phi)
mappedPost :: (Monad m, Functor g) => (forall x. f x > m (g x)) > Stream f m r > Stream g m r Source #
for :: (Monad m, Functor f) => Stream (Of a) m r > (a > Stream f m x) > Stream f m r Source #
for
replaces each element of a stream with an associated stream. Note that the
associated stream may layer any functor.
with :: (Monad m, Functor f) => Stream (Of a) m r > (a > f x) > Stream f m r Source #
Replace each element in a stream of individual Haskell values (a Stream (Of a) m r
) with an associated functorial
step.
for str f = concats (with str f) with str f = for str (yields . f) with str f = maps (\(a:>r) > r <$ f a) str with = flip subst subst = flip with
>>>
with (each [1..3]) (yield . show) & intercalates (yield "") & S.stdoutLn
1  2  3
subst :: (Monad m, Functor f) => (a > f x) > Stream (Of a) m r > Stream f m r Source #
Replace each element in a stream of individual values with a functorial
layer of any sort. subst = flip with
and is more convenient in
a sequence of compositions that transform a stream.
with = flip subst for str f = concats $ subst f str subst f = maps (\(a:>r) > r <$ f a) S.concat = concats . subst each
copy :: Monad m => Stream (Of a) m r > Stream (Of a) (Stream (Of a) m) r Source #
Duplicate the content of stream, so that it can be acted on twice in different ways,
but without breaking streaming. Thus, with each [1,2]
I might do:
>>>
S.print $ each ["one","two"]
"one" "two">>>
S.stdoutLn $ each ["one","two"]
one two
With copy, I can do these simultaneously:
>>>
S.print $ S.stdoutLn $ S.copy $ each ["one","two"]
one "one" two "two"
copy
should be understood together with effects
and is subject to the rules
S.effects . S.copy = id hoist S.effects . S.copy = id
The similar operations in Streaming
obey the same rules.
Where the actions you are contemplating are each simple folds over
the elements, or a selection of elements, then the coupling of the
folds is often more straightforwardly effected with Foldl
,
e.g.
>>>
L.purely S.fold (liftA2 (,) L.sum L.product) $ each [1..10]
(55,3628800) :> ()
rather than
>>>
S.sum $ S.product . S.copy $ each [1..10]
55 :> (3628800 :> ())
A Control.Foldl
fold can be altered to act on a selection of elements by
using handles
on an appropriate lens. Some such
manipulations are simpler and more List
like, using copy
:
>>>
L.purely S.fold (liftA2 (,) (L.handles (filtered odd) L.sum) (L.handles (filtered even) L.product)) $ each [1..10]
(25,3840) :> ()
becomes
>>>
S.sum $ S.filter odd $ S.product $ S.filter even $ S.copy $ each [1..10]
25 :> (3840 :> ())
or using store
>>>
S.sum $ S.filter odd $ S.store (S.product . S.filter even) $ each [1..10]
25 :> (3840 :> ())
But anything that fold of a Stream (Of a) m r
into e.g. an m (Of b r)
that has a constraint on m
that is carried over into Stream f m

e.g. Monad
, MonadIO
, MonadResource
, etc. can be used on the stream.
Thus, I can fold over different groupings of the original stream:
>>>
(S.toList . mapped S.toList . chunksOf 5) $ (S.toList . mapped S.toList . chunksOf 3) $ S.copy $ each [1..10]
[[1,2,3,4,5],[6,7,8,9,10]] :> ([[1,2,3],[4,5,6],[7,8,9],[10]] :> ())
The procedure can be iterated as one pleases, as one can see from this (otherwise unadvisable!) example:
>>>
(S.toList . mapped S.toList . chunksOf 4) $ (S.toList . mapped S.toList . chunksOf 3) $ S.copy $ (S.toList . mapped S.toList . chunksOf 2) $ S.copy $ each [1..12]
[[1,2,3,4],[5,6,7,8],[9,10,11,12]] :> ([[1,2,3],[4,5,6],[7,8,9],[10,11,12]] :> ([[1,2],[3,4],[5,6],[7,8],[9,10],[11,12]] :> ()))
copy
can be considered a special case of expand
:
copy = expand
$ p (a :> as) > a :> p (a :> as)
If Of
were an instance of Comonad
, then one could write
copy = expand
extend
store :: Monad m => (Stream (Of a) (Stream (Of a) m) r > t) > Stream (Of a) m r > t Source #
Store the result of any suitable fold over a stream, keeping the stream for
further manipulation. store f = f . copy
:
>>>
S.print $ S.store S.product $ each [1..4]
1 2 3 4 24 :> ()
>>>
S.print $ S.store S.sum $ S.store S.product $ each [1..4]
1 2 3 4 10 :> (24 :> ())
Here the sum (10) and the product (24) have been 'stored' for use when
finally we have traversed the stream with print
. Needless to say,
a second pass
is excluded conceptually, so the
folds that you apply successively with store
are performed
simultaneously, and in constant memory  as they would be if,
say, you linked them together with Control.Fold
:
>>>
L.impurely S.foldM (liftA3 (\a b c > (b,c)) (L.sink print) (L.generalize L.sum) (L.generalize L.product)) $ each [1..4]
1 2 3 4 (10,24) :> ()
Fusing folds after the fashion of Control.Foldl
will generally be a bit faster
than the corresponding succession of uses of store
, but by
constant factor that will be completely dwarfed when any IO is at issue.
But store
copy
is much/ more powerful, as you can see by reflecting on
uses like this:
>>>
S.sum $ S.store (S.sum . mapped S.product . chunksOf 2) $ S.store (S.product . mapped S.sum . chunksOf 2 )$ each [1..6]
21 :> (44 :> (231 :> ()))
It will be clear that this cannot be reproduced with any combination of lenses,
Control.Fold
folds, or the like. (See also the discussion of copy
.)
It would conceivable be clearer to import a series of specializations of store
.
It is intended to be used at types like these:
storeM :: (forall s m . Monad m => Stream (Of a) m s > m (Of b s)) > (Monad n => Stream (Of a) n r > Stream (Of a) n (Of b r)) storeM = store storeMIO :: (forall s m . MonadIO m => Stream (Of a) m s > m (Of b s)) > ( MonadIO n => Stream (Of a) n r > Stream (Of a) n (Of b r) storeMIO = store
It is clear from these types that we are just using the general instances:
instance (Functor f, Monad m ) => Monad (Stream f m) instance (Functor f, MonadIO m) => MonadIO (Stream f m)
We thus can't be touching the elements of the stream, or the final return value.
It is the same with other constraints that Stream (Of a)
inherits from the underlying monad,
like MonadResource
. Thus I can independently filter and write to one file, but
nub and write to another, or interact with a database and a logfile and the like:
>>>
runResourceT $ (S.writeFile "hello2.txt" . S.nub) $ store (S.writeFile "hello.txt" . S.filter (/= "world")) $ each ["hello", "world", "goodbye", "world"]
>>>
:! cat hello.txt
hello goodbye>>>
:! cat hello2.txt
hello world goodbye
chain :: Monad m => (a > m ()) > Stream (Of a) m r > Stream (Of a) m r Source #
Apply an action to all values, reyielding each
>>>
S.product $ S.chain Prelude.print $ S.each [1..5]
1 2 3 4 5 120 :> ()
sequence :: Monad m => Stream (Of (m a)) m r > Stream (Of a) m r Source #
Streams the number of seconds from the beginning of action
Thus, to mark times of user input we might write something like:
>>>
S.toList $ S.take 3 $ S.zip S.seconds S.stdinLn
a<Enter> b<Enter> c<Enter> [(0.0,"a"),(1.088711,"b"),(3.7289649999999996,"c")] :> ()
To restrict user input to some number of seconds, we might write:
>>>
S.toList $ S.map fst $ S.zip S.stdinLn $ S.takeWhile (< 3) S.seconds
one<Enter> two<Enter> three<Enter> four<Enter> five<Enter> ["one","two","three","four","five"] :> ()
This of course does not interrupt an action that has already begun.
Like the sequence
but streaming. The result type is a
stream of a's, but is not accumulated; the effects of the elements
of the original stream are interleaved in the resulting stream. Compare:
sequence :: Monad m => [m a] > m [a] sequence :: Monad m => Stream (Of (m a)) m r > Stream (Of a) m r
This obeys the rule
filter :: Monad m => (a > Bool) > Stream (Of a) m r > Stream (Of a) m r Source #
Skip elements of a stream that fail a predicate
filterM :: Monad m => (a > m Bool) > Stream (Of a) m r > Stream (Of a) m r Source #
Skip elements of a stream that fail a monadic test
mapMaybeM :: Monad m => (a > m (Maybe b)) > Stream (Of a) m r > Stream (Of b) m r Source #
Map monadically over a stream, producing a new stream
only containing the Just
values.
delay :: MonadIO m => Double > Stream (Of a) m r > Stream (Of a) m r Source #
Interpolate a delay of n seconds between yields.
take :: (Monad m, Functor f) => Int > Stream f m r > Stream f m () Source #
End a stream after n elements; the original return value is thus lost.
splitAt
preserves this information. Note that, like splitAt
, this
function is functorgeneral, so that, for example, you can take
not
just a number of items from a stream of elements, but a number
of substreams and the like.
>>>
S.toList $ S.take 3 $ each "with"
"wit" :> ()
>>>
runResourceT $ S.stdoutLn $ S.take 3 $ S.readFile "stream.hs"
import Streaming import qualified Streaming.Prelude as S import Streaming.Prelude (each, next, yield)
takeWhile :: Monad m => (a > Bool) > Stream (Of a) m r > Stream (Of a) m () Source #
End stream when an element fails a condition; the original return value is lost.
By contrast span
preserves this information, and is generally more desirable.
S.takeWhile thus = void . S.span thus
To preserve the information  but thus also force the rest of the stream to be developed  write
S.drained . S.span thus
as dropWhile thus
is
S.effects . S.span thus
takeWhileM :: Monad m => (a > m Bool) > Stream (Of a) m r > Stream (Of a) m () Source #
Like takeWhile
, but takes a monadic predicate.
drop :: Monad m => Int > Stream (Of a) m r > Stream (Of a) m r Source #
Ignore the first n elements of a stream, but carry out the actions
>>>
S.toList $ S.drop 2 $ S.replicateM 5 getLine
a<Enter> b<Enter> c<Enter> d<Enter> e<Enter> ["c","d","e"] :> ()
Because it retains the final return value, drop n
is a suitable argument
for maps
:
>>>
S.toList $ concats $ maps (S.drop 4) $ chunksOf 5 $ each [1..20]
[5,10,15,20] :> ()
dropWhile :: Monad m => (a > Bool) > Stream (Of a) m r > Stream (Of a) m r Source #
Ignore elements of a stream until a test succeeds, retaining the rest.
>>>
S.print $ S.dropWhile ((< 5) . length) S.stdinLn
one<Enter> two<Enter> three<Enter> "three" four<Enter> "four" ^CInterrupted.
concat :: (Monad m, Foldable f) => Stream (Of (f a)) m r > Stream (Of a) m r Source #
Make a stream of traversable containers into a stream of their separate elements. This is just
concat str = for str each
>>>
S.print $ S.concat (each ["xy","z"])
'x' 'y' 'z'
Note that it also has the effect of catMaybes
, rights
'map snd' and suchlike operations.
>>>
S.print $ S.concat $ S.each [Just 1, Nothing, Just 2]
1 2>>>
S.print $ S.concat $ S.each [Right 1, Left "Error!", Right 2]
1 2>>>
S.print $ S.concat $ S.each [('A',1), ('B',2)]
1 2
scan :: Monad m => (x > a > x) > x > (x > b) > Stream (Of a) m r > Stream (Of b) m r Source #
Strict left scan, streaming, e.g. successive partial results. The seed is yielded first, before any action of finding the next element is performed.
>>>
S.print $ S.scan (++) "" id $ each (words "a b c d")
"" "a" "ab" "abc" "abcd"
scan
is fitted for use with Control.Foldl
, thus:
>>>
S.print $ L.purely S.scan L.list $ each [3..5]
[] [3] [3,4] [3,4,5]
scanM :: Monad m => (x > a > m x) > m x > (x > m b) > Stream (Of a) m r > Stream (Of b) m r Source #
Strict left scan, accepting a monadic function. It can be used with
FoldM
s from Control.Foldl
using impurely
. Here we yield
a succession of vectors each recording
>>>
let v = L.impurely scanM L.vector $ each [1..4::Int] :: Stream (Of (U.Vector Int)) IO ()
>>>
S.print v
fromList [] fromList [1] fromList [1,2] fromList [1,2,3] fromList [1,2,3,4]
scanned :: Monad m => (x > a > x) > x > (x > b) > Stream (Of a) m r > Stream (Of (a, b)) m r Source #
read :: (Monad m, Read a) => Stream (Of String) m r > Stream (Of a) m r Source #
Make a stream of strings into a stream of parsed values, skipping bad cases
>>>
S.sum_ $ S.read $ S.takeWhile (/= "total") S.stdinLn :: IO Int
1000<Enter> 2000<Enter> total<Enter> 3000
cons :: Monad m => a > Stream (Of a) m r > Stream (Of a) m r Source #
The natural cons
for a Stream (Of a)
.
cons a stream = yield a >> stream
Useful for interoperation:
Data.Text.foldr S.cons (return ()) :: Text > Stream (Of Char) m () Lazy.foldrChunks S.cons (return ()) :: Lazy.ByteString > Stream (Of Strict.ByteString) m ()
and so on.
slidingWindow :: Monad m => Int > Stream (Of a) m b > Stream (Of (Seq a)) m b Source #
slidingWindow
accumulates the first n
elements of a stream,
update thereafter to form a sliding window of length n
.
It follows the behavior of the slidingWindow function in
conduitcombinators.
>>>
S.print $ slidingWindow 4 $ S.each "123456"
fromList "1234" fromList "2345" fromList "3456"
Splitting and inspecting streams of elements
next :: Monad m => Stream (Of a) m r > m (Either r (a, Stream (Of a) m r)) Source #
The standard way of inspecting the first item in a stream of elements, if the
stream is still 'running'. The Right
case contains a
Haskell pair, where the more general inspect
would return a leftstrict pair.
There is no reason to prefer inspect
since, if the Right
case is exposed,
the first element in the pair will have been evaluated to whnf.
next :: Monad m => Stream (Of a) m r > m (Either r (a, Stream (Of a) m r)) inspect :: Monad m => Stream (Of a) m r > m (Either r (Of a (Stream (Of a) m r)))
Interoperate with pipes
producers thus:
Pipes.unfoldr Stream.next :: Stream (Of a) m r > Producer a m r Stream.unfoldr Pipes.next :: Producer a m r > Stream (Of a) m r
Similarly:
IOStreams.unfoldM (fmap (either (const Nothing) Just) . next) :: Stream (Of a) IO b > IO (InputStream a) Conduit.unfoldM (fmap (either (const Nothing) Just) . next) :: Stream (Of a) m r > Source a m r
But see uncons
, which is better fitted to these unfoldM
s
uncons :: Monad m => Stream (Of a) m r > m (Maybe (a, Stream (Of a) m r)) Source #
Inspect the first item in a stream of elements, without a return value.
uncons
provides convenient exit into another streaming type:
IOStreams.unfoldM uncons :: Stream (Of a) IO b > IO (InputStream a) Conduit.unfoldM uncons :: Stream (Of a) m r > Conduit.Source m a
splitAt :: (Monad m, Functor f) => Int > Stream f m r > Stream f m (Stream f m r) Source #
Split a succession of layers after some number, returning a streaming or
effectful pair. This function is the same as the splitsAt
exported by the
Streaming
module, but since this module is imported qualified, it can
usurp a Prelude name. It specializes to:
splitAt :: (Monad m, Functor f) => Int > Stream (Of a) m r > Stream (Of a) m (Stream (Of a) m r)
split :: (Eq a, Monad m) => a > Stream (Of a) m r > Stream (Stream (Of a) m) m r Source #
Split a stream of elements wherever a given element arises.
The action is like that of words
.
>>>
S.stdoutLn $ mapped S.toList $ S.split ' ' $ each "hello world "
hello world
break :: Monad m => (a > Bool) > Stream (Of a) m r > Stream (Of a) m (Stream (Of a) m r) Source #
Break a sequence upon meeting element falls under a predicate, keeping it and the rest of the stream as the return value.
>>>
rest < S.print $ S.break even $ each [1,1,2,3]
1 1>>>
S.print rest
2 3
breakWhen :: Monad m => (x > a > x) > x > (x > b) > (b > Bool) > Stream (Of a) m r > Stream (Of a) m (Stream (Of a) m r) Source #
Yield elements, using a fold to maintain state, until the accumulated
value satifies the supplied predicate. The fold will then be shortcircuited
and the element that breaks it will be put after the break.
This function is easiest to use with purely
>>>
rest < each [1..10] & L.purely S.breakWhen L.sum (>10) & S.print
1 2 3 4>>>
S.print rest
5 6 7 8 9 10
span :: Monad m => (a > Bool) > Stream (Of a) m r > Stream (Of a) m (Stream (Of a) m r) Source #
Stream elements until one fails the condition, return the rest.
group :: (Monad m, Eq a) => Stream (Of a) m r > Stream (Stream (Of a) m) m r Source #
Group successive equal items together
>>>
S.toList $ mapped S.toList $ S.group $ each "baaaaad"
["b","aaaaa","d"] :> ()
>>>
S.toList $ concats $ maps (S.drained . S.splitAt 1) $ S.group $ each "baaaaaaad"
"bad" :> ()
groupBy :: Monad m => (a > a > Bool) > Stream (Of a) m r > Stream (Stream (Of a) m) m r Source #
Group elements of a stream in accordance with the supplied comparison.
>>>
S.print $ mapped S.toList $ S.groupBy (>=) $ each [1,2,3,1,2,3,4,3,2,4,5,6,7,6,5]
[1] [2] [3,1,2,3] [4,3,2,4] [5] [6] [7,6,5]
Sum and Compose manipulation
switch :: Sum f g r > Sum g f r Source #
Swap the order of functors in a sum of functors.
>>>
S.toList $ S.print $ separate $ maps S.switch $ maps (S.distinguish (=='a')) $ S.each "banana"
'a' 'a' 'a' "bnn" :> ()>>>
S.toList $ S.print $ separate $ maps (S.distinguish (=='a')) $ S.each "banana"
'b' 'n' 'n' "aaa" :> ()
separate :: (Monad m, Functor f, Functor g) => Stream (Sum f g) m r > Stream f (Stream g m) r Source #
Given a stream on a sum of functors, make it a stream on the left functor,
with the streaming on the other functor as the governing monad. This is
useful for acting on one or the other functor with a fold, leaving the
other material for another treatment. It generalizes
partitionEithers
, but actually streams properly.
>>>
let odd_even = S.maps (S.distinguish even) $ S.each [1..10::Int]
>>>
:t separate odd_even
separate odd_even :: Monad m => Stream (Of Int) (Stream (Of Int) m) ()
Now, for example, it is convenient to fold on the left and right values separately:
>>>
S.toList $ S.toList $ separate odd_even
[2,4,6,8,10] :> ([1,3,5,7,9] :> ())
Or we can write them to separate files or whatever:
>>>
runResourceT $ S.writeFile "even.txt" . S.show $ S.writeFile "odd.txt" . S.show $ S.separate odd_even
>>>
:! cat even.txt
2 4 6 8 10>>>
:! cat odd.txt
1 3 5 7 9
Of course, in the special case of Stream (Of a) m r
, we can achieve the above
effects more simply by using copy
>>>
S.toList . S.filter even $ S.toList . S.filter odd $ S.copy $ each [1..10::Int]
[2,4,6,8,10] :> ([1,3,5,7,9] :> ())
But separate
and unseparate
are functorgeneral.
unseparate :: (Monad m, Functor f, Functor g) => Stream f (Stream g m) r > Stream (Sum f g) m r Source #
Folds
Use these to fold the elements of a Stream
.
>>>
S.fold_ (+) 0 id $ S.each [1..0]
50
The general folds fold
, fold_', foldM
and foldM_
are arranged
for use with Control.Foldl
purely
and impurely
>>>
L.purely fold_ L.sum $ each [1..10]
55>>>
L.purely fold_ (liftA3 (,,) L.sum L.product L.list) $ each [1..10]
(55,3628800,[1,2,3,4,5,6,7,8,9,10])
All functions marked with an underscore omit
(e.g. fold_
, sum_
) the stream's return value in a leftstrict pair.
They are good for exiting streaming completely,
but when you are, e.g. mapped
ing over a Stream (Stream (Of a) m) m r
,
which is to be compared with [[a]]
. Specializing, we have e.g.
mapped sum :: (Monad m, Num n) => Stream (Stream (Of Int)) IO () > Stream (Of n) IO () mapped (fold mappend mempty id) :: Stream (Stream (Of Int)) IO () > Stream (Of Int) IO ()
>>>
S.print $ mapped S.sum $ chunksOf 3 $ S.each [1..10]
6 15 24 10
>>>
let three_folds = L.purely S.fold (liftA3 (,,) L.sum L.product L.list)
>>>
S.print $ mapped three_folds $ chunksOf 3 (each [1..10])
(6,6,[1,2,3]) (15,120,[4,5,6]) (24,504,[7,8,9]) (10,10,[10])
fold :: Monad m => (x > a > x) > x > (x > b) > Stream (Of a) m r > m (Of b r) Source #
Strict fold of a Stream
of elements that preserves the return value.
The third parameter will often be id
where a fold is written by hand:
>>>
S.fold (+) 0 id $ each [1..10]
55 :> ()
>>>
S.fold (*) 1 id $ S.fold (+) 0 id $ S.copy $ each [1..10]
3628800 :> (55 :> ())
It can be used to replace a standard Haskell type with one more suited to
writing a strict accumulation function. It is also crucial to the
Applicative instance for Control.Foldl.Fold
We can apply such a fold
purely
Control.Foldl.purely S.fold :: Monad m => Fold a b > Stream (Of a) m r > m (Of b r)
Thus, specializing a bit:
L.purely S.fold L.sum :: Stream (Of Int) Int r > m (Of Int r) mapped (L.purely S.fold L.sum) :: Stream (Stream (Of Int)) IO r > Stream (Of Int) IO r
Here we use the Applicative instance for Control.Foldl.Fold
to
stream threeitem segments of a stream together with their sums and products.
>>>
S.print $ mapped (L.purely S.fold (liftA3 (,,) L.list L.product L.sum)) $ chunksOf 3 $ each [1..10]
([1,2,3],6,6) ([4,5,6],120,15) ([7,8,9],504,24) ([10],10,10)
fold_ :: Monad m => (x > a > x) > x > (x > b) > Stream (Of a) m r > m b Source #
Strict fold of a Stream
of elements, preserving only the result of the fold, not
the return value of the stream. The third parameter will often be id
where a fold
is written by hand:
>>>
S.fold_ (+) 0 id $ each [1..10]
55
It can be used to replace a standard Haskell type with one more suited to
writing a strict accumulation function. It is also crucial to the
Applicative instance for Control.Foldl.Fold
Control.Foldl.purely fold :: Monad m => Fold a b > Stream (Of a) m () > m b
foldM :: Monad m => (x > a > m x) > m x > (x > m b) > Stream (Of a) m r > m (Of b r) Source #
Strict, monadic fold of the elements of a 'Stream (Of a)'
Control.Foldl.impurely foldM' :: Monad m => FoldM a b > Stream (Of a) m r > m (b, r)
Thus to accumulate the elements of a stream as a vector, together with a random element we might write:
>>>
L.impurely S.foldM (liftA2 (,) L.vector L.random) $ each [1..10::Int] :: IO (Of (U.Vector Int,Maybe Int) ())
([1,2,3,4,5,6,7,8,9,10],Just 9) :> ()
foldM_ :: Monad m => (x > a > m x) > m x > (x > m b) > Stream (Of a) m r > m b Source #
Strict, monadic fold of the elements of a 'Stream (Of a)'
Control.Foldl.impurely foldM :: Monad m => FoldM a b > Stream (Of a) m () > m b
sum :: (Monad m, Num a) => Stream (Of a) m r > m (Of a r) Source #
Fold a Stream
of numbers into their sum with the return value
mapped S.sum :: Stream (Stream (Of Int)) m r > Stream (Of Int) m r
>>>
S.sum $ each [1..10]
55 :> ()
>>>
(n :> rest) < S.sum $ S.splitAt 3 $ each [1..10]
>>>
print n
6>>>
(m :> rest') < S.sum $ S.splitAt 3 rest
>>>
print m
15>>>
S.print rest'
7 8 9
sum_ :: (Monad m, Num a) => Stream (Of a) m () > m a Source #
Fold a Stream
of numbers into their sum
product :: (Monad m, Num a) => Stream (Of a) m r > m (Of a r) Source #
Fold a Stream
of numbers into their product with the return value
maps' product' :: Stream (Stream (Of Int)) m r > Stream (Of Int) m r
product_ :: (Monad m, Num a) => Stream (Of a) m () > m a Source #
Fold a Stream
of numbers into their product
elem :: (Monad m, Eq a) => a > Stream (Of a) m r > m (Of Bool r) Source #
Exhaust a stream remembering only whether a
was an element.
notElem :: (Monad m, Eq a) => a > Stream (Of a) m r > m (Of Bool r) Source #
Exhaust a stream deciding whether a
was an element.
length :: Monad m => Stream (Of a) m r > m (Of Int r) Source #
Run a stream, keeping its length and its return value.
>>>
S.print $ mapped S.length $ chunksOf 3 $ S.each [1..10]
3 3 3 1
length_ :: Monad m => Stream (Of a) m r > m Int Source #
Run a stream, remembering only its length:
>>>
S.length $ S.each [1..10]
10
toList :: Monad m => Stream (Of a) m r > m (Of [a] r) Source #
Convert an effectful Stream
into a list alongside the return value
mapped toList :: Stream (Stream (Of a)) m r > Stream (Of [a]) m
Like toList_
, toList
breaks streaming; unlike toList_
it preserves the return value
and thus is frequently useful with e.g. mapped
>>>
S.print $ mapped S.toList $ chunksOf 3 $ each [1..9]
[1,2,3] [4,5,6] [7,8,9]>>>
S.print $ mapped S.toList $ chunksOf 2 $ S.replicateM 4 getLine
s<Enter> t<Enter> ["s","t"] u<Enter> v<Enter> ["u","v"]
toList_ :: Monad m => Stream (Of a) m () > m [a] Source #
Convert an effectful 'Stream (Of a)' into a list of as
Note: Needless to say, this function does not stream properly.
It is basically the same as Prelude mapM
which, like replicateM
,
sequence
and similar operations on traversable containers
is a leading cause of space leaks.
mconcat :: (Monad m, Monoid w) => Stream (Of w) m r > m (Of w r) Source #
Fold streamed items into their monoidal sum
>>>
S.mconcat $ S.take 2 $ S.map (Data.Monoid.Last . Just) (S.stdinLn)
first<Enter> last<Enter> Last {getLast = Just "last"} :> ()
foldrT :: (Monad m, MonadTrans t, Monad (t m)) => (a > t m r > t m r) > Stream (Of a) m r > t m r Source #
A natural right fold for consuming a stream of elements.
See also the more general iterTM
in the Streaming
module
and the still more general destroy
foldrT (\a p > Streaming.yield a >> p) = id foldrT (\a p > Pipes.yield a >> p) :: Monad m => Stream (Of a) m r > Producer a m r foldrT (\a p > Conduit.yield a >> p) :: Monad m => Stream (Of a) m r > Conduit a m r
Zips and unzips
zip :: Monad m => Stream (Of a) m r > Stream (Of b) m r > Stream (Of (a, b)) m r Source #
Zip two Streams
s
zipWith :: Monad m => (a > b > c) > Stream (Of a) m r > Stream (Of b) m r > Stream (Of c) m r Source #
Zip two Streams
s using the provided combining function
zip3 :: Monad m => Stream (Of a) m r > Stream (Of b) m r > Stream (Of c) m r > Stream (Of (a, b, c)) m r Source #
Zip three streams together
zipWith3 :: Monad m => (a > b > c > d) > Stream (Of a) m r > Stream (Of b) m r > Stream (Of c) m r > Stream (Of d) m r Source #
Zip three Stream
s with a combining function
unzip :: Monad m => Stream (Of (a, b)) m r > Stream (Of a) (Stream (Of b) m) r Source #
The type
Data.List.unzip :: [(a,b)] > ([a],[b])
might lead us to expect
Streaming.unzip :: Stream (Of (a,b)) m r > Stream (Of a) m (Stream (Of b) m r)
which would not stream, since it would have to accumulate the second stream (of b
s).
Of course, Data.List
unzip
doesn't stream either.
This unzip
does
stream, though of course you can spoil this by using e.g. toList
:
>>>
let xs = map (\x> (x,show x)) [1..5::Int]
>>>
S.toList $ S.toList $ S.unzip (S.each xs)
["1","2","3","4","5"] :> ([1,2,3,4,5] :> ())
>>>
Prelude.unzip xs
([1,2,3,4,5],["1","2","3","4","5"])
Note the difference of order in the results. It may be of some use to think why.
The first application of toList
was applied to a stream of integers:
>>>
:t S.unzip $ S.each xs
S.unzip $ S.each xs :: Monad m => Stream (Of Int) (Stream (Of String) m) ()
Like any fold, toList
takes no notice of the monad of effects.
toList :: Monad m => Stream (Of a) m r > m (Of [a] r)
In the case at hand (since I am in ghci
) m = Stream (Of String) IO
.
So when I apply toList
, I exhaust that stream of integers, folding
it into a list:
>>>
:t S.toList $ S.unzip $ S.each xs
S.toList $ S.unzip $ S.each xs :: Monad m => Stream (Of String) m (Of [Int] ())
When I apply toList
to this, I reduce everything to an ordinary action in IO
,
and return a list of strings:
>>>
S.toList $ S.toList $ S.unzip (S.each xs)
["1","2","3","4","5"] :> ([1,2,3,4,5] :> ())
unzip
can be considered a special case of either unzips
or expand
:
unzip =unzips
.maps
(((a,b) :> x) > Compose (a :> b :> x)) unzip =expand
$ p ((a,b) :> abs) > b :> p (a :> abs)
partitionEithers :: Monad m => Stream (Of (Either a b)) m r > Stream (Of a) (Stream (Of b) m) r Source #
Separate left and right values in distinct streams. (separate
is
a more powerful, functorgeneral, equivalent using Sum
in place of Either
).
So, for example, to permit unlimited user
input of Int
s on condition of only two errors, we might write:
>>>
S.toList $ S.print $ S.take 2 $ partitionEithers $ S.map readEither $ S.stdinLn :: IO (Of [Int] ())
1<Enter> 2<Enter> qqqqqqqqqq<Enter> "Prelude.read: no parse" 3<Enter> rrrrrrrrrr<Enter> "Prelude.read: no parse" [1,2,3] :> ()
partitionEithers = separate . maps S.eitherToSum lefts = hoist S.effects . partitionEithers rights = S.effects . partitionEithers rights = S.concat
partition :: Monad m => (a > Bool) > Stream (Of a) m r > Stream (Of a) (Stream (Of a) m) r Source #
filter p = hoist effects (partition p)
Maybes
These functions discard the Nothing
s that they encounter. They are analogous
to the functions from Data.Maybe
that share their names.
Pair manipulation
lazily :: Of a b > (a, b) Source #
Note that lazily
, strictly
, fst'
, and mapOf
are all socalled natural transformations on the primitive Of a
functor
If we write
type f ~~> g = forall x . f x > g x
then we can restate some types as follows:
mapOf :: (a > b) > Of a ~~> Of b  Bifunctor first lazily :: Of a ~~> (,) a Identity . fst' :: Of a ~~> Identity a
Manipulation of a Stream f m r
by mapping often turns on recognizing natural transformations of f
.
Thus maps
is far more general the the map
of the Streaming.Prelude
, which can be
defined thus:
S.map :: (a > b) > Stream (Of a) m r > Stream (Of b) m r S.map f = maps (mapOf f)
i.e.
S.map f = maps (\(a :> x) > (f a :> x))
This rests on recognizing that mapOf
is a natural transformation; note though
that it results in such a transformation as well:
S.map :: (a > b) > Stream (Of a) m ~> Stream (Of b) m
Thus we can maps
it in turn.
fst'
and snd'
extract the first and second element of a pair
>>>
S.fst' (1:>"hi")
1>>>
S.snd' (1:>"hi")
"hi"
They are contained in the _first
and _second
lenses,
if any lens library is in scope
>>>
import Lens.Micro
>>>
(1:>"hi") ^. S._first
1>>>
(1:>"hi") ^. S._second
"hi"
mapOf :: (a > b) > Of a r > Of b r Source #
Map a function over the first element of an Of
pair
>>>
S.mapOf even (1:>"hi")
False :> "hi"
mapOf
is just first
from the Bifunctor
instance
>>>
first even (1:>"hi")
False :> "hi"
and is contained in the _first
lens
>>>
import Lens.Micro
>>>
over S._first even (1:>"hi")
False :> "hi"
_first :: Functor f => (a > f a') > Of a b > f (Of a' b) Source #
A lens into the first element of a leftstrict pair
_second :: Functor f => (b > f b') > Of a b > f (Of a b') Source #
A lens into the second element of a leftstrict pair
Interoperation
reread :: Monad m => (s > m (Maybe a)) > s > Stream (Of a) m () Source #
Read an IORef (Maybe a)
or a similar device until it reads Nothing
.
reread
provides convenient exit from the iostreams
library
reread readIORef :: IORef (Maybe a) > Stream (Of a) IO () reread Streams.read :: System.IO.Streams.InputStream a > Stream (Of a) IO ()