{-# LANGUAGE CPP, BangPatterns          #-}
{-# LANGUAGE GeneralizedNewtypeDeriving #-}

------------------------------------------------------------------------------
-- |
-- Module:      Blaze.ByteString.Builder
-- Copyright:   (c) 2013 Leon P Smith
-- License:     BSD3
-- Maintainer:  https://github.com/blaze-builder
-- Stability:   stable
--
-- "Blaze.ByteString.Builder" is the main module, which you should import as a user
-- of the @blaze-builder@ library.
--
-- > import Blaze.ByteString.Builder
--
-- It provides you with a type 'Builder' that allows to efficiently construct
-- lazy bytestrings with a large average chunk size.
--
-- Intuitively, a 'Builder' denotes the construction of a part of a lazy
-- bytestring. Builders can either be created using one of the primitive
-- combinators in "Blaze.ByteString.Builder.Write" or by using one of the predefined
-- combinators for standard Haskell values (see the exposed modules of this
-- package).  Concatenation of builders is done using 'mappend' from the
-- 'Monoid' typeclass.
--
-- Here is a small example that serializes a list of strings using the UTF-8
-- encoding.
--
-- @ import "Blaze.ByteString.Builder.Char.Utf8"@
--
-- > strings :: [String]
-- > strings = replicate 10000 "Hello there!"
--
-- The function @'fromString'@ creates a 'Builder' denoting the UTF-8 encoded
-- argument. Hence, UTF-8 encoding and concatenating all @strings@ can be done
-- follows.
--
-- > concatenation :: Builder
-- > concatenation = mconcat $ map fromString strings
--
-- The function 'toLazyByteString'  can be used to execute a 'Builder' and
-- obtain the resulting lazy bytestring.
--
-- > result :: L.ByteString
-- > result = toLazyByteString concatenation
--
-- The @result@ is a lazy bytestring containing 10000 repetitions of the string
-- @\"Hello there!\"@ encoded using UTF-8. The corresponding 120000 bytes are
-- distributed among three chunks of 32kb and a last chunk of 6kb.
--
-- /A note on history./ This serialization library was inspired by the
-- @Data.Binary.Builder@ module provided by the @binary@ package. It was
-- originally developed with the specific needs of the @blaze-html@ package in
-- mind. Since then it has been restructured to serve as a drop-in replacement
-- for @Data.Binary.Builder@, which it improves upon both in speed as well as
-- expressivity.
--
------------------------------------------------------------------------------

module Blaze.ByteString.Builder
    (
      -- * The 'Builder' type
      B.Builder

      -- * Creating builders
    , module Blaze.ByteString.Builder.Int
    , module Blaze.ByteString.Builder.Word
    , module Blaze.ByteString.Builder.ByteString
    , B.flush

      -- * Executing builders
    , B.toLazyByteString
    , toLazyByteStringWith
    , toByteString
    , toByteStringIO
    , toByteStringIOWith

    -- * 'Write's
    , W.Write
    , W.fromWrite
    , W.fromWriteSingleton
    , W.fromWriteList
    , writeToByteString

    -- ** Writing 'Storable's
    , W.writeStorable
    , W.fromStorable
    , W.fromStorables

    ) where

import Control.Monad(unless)

#if __GLASGOW_HASKELL__ >= 702
import Foreign
import qualified Foreign.ForeignPtr.Unsafe as Unsafe
#else
import Foreign as Unsafe
#endif

import qualified Blaze.ByteString.Builder.Internal.Write as W
import           Blaze.ByteString.Builder.ByteString
import           Blaze.ByteString.Builder.Word
import           Blaze.ByteString.Builder.Int

import           Data.ByteString.Builder ( Builder )
import qualified Data.ByteString.Builder       as B
import qualified Data.ByteString.Builder.Extra as B

import qualified Data.ByteString               as S
import qualified Data.ByteString.Internal      as S
import qualified Data.ByteString.Lazy          as L
import qualified Data.ByteString.Lazy.Internal as L

#if __GLASGOW_HASKELL__ >= 702
import System.IO.Unsafe (unsafeDupablePerformIO)
#else
unsafeDupablePerformIO :: IO a -> a
unsafeDupablePerformIO = unsafePerformIO
#endif

withBS :: S.ByteString -> (ForeignPtr Word8 -> Int -> Int -> a) -> a
#if MIN_VERSION_bytestring(0,11,0)
withBS :: forall a. ByteString -> (ForeignPtr Word8 -> Int -> Int -> a) -> a
withBS (S.BS ForeignPtr Word8
fptr Int
len) ForeignPtr Word8 -> Int -> Int -> a
f = ForeignPtr Word8 -> Int -> Int -> a
f ForeignPtr Word8
fptr Int
0 Int
len
#else
withBS (S.PS fptr offset len) f = f fptr offset len
#endif

mkBS :: ForeignPtr Word8 -> Int -> S.ByteString
#if MIN_VERSION_bytestring(0,11,0)
mkBS :: ForeignPtr Word8 -> Int -> ByteString
mkBS ForeignPtr Word8
fptr Int
len = ForeignPtr Word8 -> Int -> ByteString
S.BS ForeignPtr Word8
fptr Int
len
#else
mkBS fptr len = S.PS fptr 0 len
#endif

-- | Pack the chunks of a lazy bytestring into a single strict bytestring.
packChunks :: L.ByteString -> S.ByteString
packChunks :: ByteString -> ByteString
packChunks ByteString
lbs = do
    Int -> (Ptr Word8 -> IO ()) -> ByteString
S.unsafeCreate (forall a b. (Integral a, Num b) => a -> b
fromIntegral forall a b. (a -> b) -> a -> b
$ ByteString -> Int64
L.length ByteString
lbs) (forall {b}. ByteString -> Ptr b -> IO ()
copyChunks ByteString
lbs)
  where
    copyChunks :: ByteString -> Ptr b -> IO ()
copyChunks !ByteString
L.Empty           !Ptr b
_pf = forall (m :: * -> *) a. Monad m => a -> m a
return ()
    copyChunks !(L.Chunk ByteString
bs ByteString
lbs') !Ptr b
pf  = forall a. ByteString -> (ForeignPtr Word8 -> Int -> Int -> a) -> a
withBS ByteString
bs forall a b. (a -> b) -> a -> b
$ \ForeignPtr Word8
fpbuf Int
o Int
l -> do
        forall a b. ForeignPtr a -> (Ptr a -> IO b) -> IO b
withForeignPtr ForeignPtr Word8
fpbuf forall a b. (a -> b) -> a -> b
$ \Ptr Word8
pbuf ->
            forall a. Ptr a -> Ptr a -> Int -> IO ()
copyBytes Ptr b
pf (Ptr Word8
pbuf forall a b. Ptr a -> Int -> Ptr b
`plusPtr` Int
o) Int
l
        ByteString -> Ptr b -> IO ()
copyChunks ByteString
lbs' (Ptr b
pf forall a b. Ptr a -> Int -> Ptr b
`plusPtr` Int
l)

-- | Run the builder to construct a strict bytestring containing the sequence
-- of bytes denoted by the builder. This is done by first serializing to a lazy bytestring and then packing its
-- chunks to a appropriately sized strict bytestring.
--
-- > toByteString = packChunks . toLazyByteString
--
-- Note that @'toByteString'@ is a 'Monoid' homomorphism.
--
-- > toByteString mempty          == mempty
-- > toByteString (x `mappend` y) == toByteString x `mappend` toByteString y
--
-- However, in the second equation, the left-hand-side is generally faster to
-- execute.
--
toByteString :: Builder -> S.ByteString
toByteString :: Builder -> ByteString
toByteString = ByteString -> ByteString
packChunks forall b c a. (b -> c) -> (a -> b) -> a -> c
. Builder -> ByteString
B.toLazyByteString

-- | Default size (~32kb) for the buffer that becomes a chunk of the output
-- stream once it is filled.
--
defaultBufferSize :: Int
defaultBufferSize :: Int
defaultBufferSize = Int
32 forall a. Num a => a -> a -> a
* Int
1024 forall a. Num a => a -> a -> a
- Int
overhead -- Copied from Data.ByteString.Lazy.
    where overhead :: Int
overhead = Int
2 forall a. Num a => a -> a -> a
* forall a. Storable a => a -> Int
sizeOf (forall a. HasCallStack => a
undefined :: Int)


-- | @toByteStringIOWith bufSize io b@ runs the builder @b@ with a buffer of
-- at least the size @bufSize@ and executes the 'IO' action @io@ whenever the
-- buffer is full.
--
-- Compared to 'toLazyByteStringWith' this function requires less allocation,
-- as the output buffer is only allocated once at the start of the
-- serialization and whenever something bigger than the current buffer size has
-- to be copied into the buffer, which should happen very seldomly for the
-- default buffer size of 32kb. Hence, the pressure on the garbage collector is
-- reduced, which can be an advantage when building long sequences of bytes.
--
toByteStringIO :: (S.ByteString -> IO ()) -> Builder -> IO ()
toByteStringIO :: (ByteString -> IO ()) -> Builder -> IO ()
toByteStringIO = Int -> (ByteString -> IO ()) -> Builder -> IO ()
toByteStringIOWith Int
defaultBufferSize

toByteStringIOWith :: Int                      -- ^ Buffer size (upper bounds
                                               -- the number of bytes forced
                                               -- per call to the 'IO' action).
                   -> (S.ByteString -> IO ())  -- ^ 'IO' action to execute per
                                               -- full buffer, which is
                                               -- referenced by a strict
                                               -- 'S.ByteString'.
                   -> Builder                -- ^ 'Builder' to run.
                   -> IO ()                    -- ^ Resulting 'IO' action.
toByteStringIOWith :: Int -> (ByteString -> IO ()) -> Builder -> IO ()
toByteStringIOWith !Int
bufSize ByteString -> IO ()
io Builder
builder = do
    forall a. Int -> IO (ForeignPtr a)
S.mallocByteString Int
bufSize forall (m :: * -> *) a b. Monad m => m a -> (a -> m b) -> m b
>>= BufferWriter -> Int -> ForeignPtr Word8 -> IO ()
getBuffer (Builder -> BufferWriter
B.runBuilder Builder
builder) Int
bufSize
  where
    getBuffer :: BufferWriter -> Int -> ForeignPtr Word8 -> IO ()
getBuffer BufferWriter
writer !Int
size ForeignPtr Word8
fp = do
      let !ptr :: Ptr Word8
ptr = forall a. ForeignPtr a -> Ptr a
Unsafe.unsafeForeignPtrToPtr ForeignPtr Word8
fp
      (Int
bytes, Next
next) <- BufferWriter
writer Ptr Word8
ptr Int
size
      case Next
next of
        Next
B.Done -> ByteString -> IO ()
io forall a b. (a -> b) -> a -> b
$! ForeignPtr Word8 -> Int -> ByteString
mkBS ForeignPtr Word8
fp Int
bytes
        B.More Int
req BufferWriter
writer' -> do
           ByteString -> IO ()
io forall a b. (a -> b) -> a -> b
$! ForeignPtr Word8 -> Int -> ByteString
mkBS ForeignPtr Word8
fp Int
bytes
           let !size' :: Int
size' = forall a. Ord a => a -> a -> a
max Int
bufSize Int
req
           forall a. Int -> IO (ForeignPtr a)
S.mallocByteString Int
size' forall (m :: * -> *) a b. Monad m => m a -> (a -> m b) -> m b
>>= BufferWriter -> Int -> ForeignPtr Word8 -> IO ()
getBuffer BufferWriter
writer' Int
size'
        B.Chunk ByteString
bs' BufferWriter
writer' -> do
           if Int
bytes forall a. Ord a => a -> a -> Bool
> Int
0
             then do
               ByteString -> IO ()
io forall a b. (a -> b) -> a -> b
$! ForeignPtr Word8 -> Int -> ByteString
mkBS ForeignPtr Word8
fp Int
bytes
               forall (f :: * -> *). Applicative f => Bool -> f () -> f ()
unless (ByteString -> Bool
S.null ByteString
bs') (ByteString -> IO ()
io ByteString
bs')
               forall a. Int -> IO (ForeignPtr a)
S.mallocByteString Int
bufSize forall (m :: * -> *) a b. Monad m => m a -> (a -> m b) -> m b
>>= BufferWriter -> Int -> ForeignPtr Word8 -> IO ()
getBuffer BufferWriter
writer' Int
bufSize
             else do
               forall (f :: * -> *). Applicative f => Bool -> f () -> f ()
unless (ByteString -> Bool
S.null ByteString
bs') (ByteString -> IO ()
io ByteString
bs')
               BufferWriter -> Int -> ForeignPtr Word8 -> IO ()
getBuffer BufferWriter
writer' Int
size ForeignPtr Word8
fp


-- | Run a 'Builder' with the given buffer sizes.
--
-- Use this function for integrating the 'Builder' type with other libraries
-- that generate lazy bytestrings.
--
-- Note that the builders should guarantee that on average the desired chunk
-- size is attained. Builders may decide to start a new buffer and not
-- completely fill the existing buffer, if this is faster. However, they should
-- not spill too much of the buffer, if they cannot compensate for it.
--
-- FIXME: Note that the following paragraphs are not entirely correct as of
-- blaze-builder-0.4:
--
-- A call @toLazyByteStringWith bufSize minBufSize firstBufSize@ will generate
-- a lazy bytestring according to the following strategy. First, we allocate
-- a buffer of size @firstBufSize@ and start filling it. If it overflows, we
-- allocate a buffer of size @minBufSize@ and copy the first buffer to it in
-- order to avoid generating a too small chunk. Finally, every next buffer will
-- be of size @bufSize@. This, slow startup strategy is required to achieve
-- good speed for short (<200 bytes) resulting bytestrings, as for them the
-- allocation cost is of a large buffer cannot be compensated. Moreover, this
-- strategy also allows us to avoid spilling too much memory for short
-- resulting bytestrings.
--
-- Note that setting @firstBufSize >= minBufSize@ implies that the first buffer
-- is no longer copied but allocated and filled directly. Hence, setting
-- @firstBufSize = bufSize@ means that all chunks will use an underlying buffer
-- of size @bufSize@. This is recommended, if you know that you always output
-- more than @minBufSize@ bytes.
toLazyByteStringWith
    :: Int           -- ^ Buffer size (upper-bounds the resulting chunk size).
    -> Int           -- ^ This parameter is ignored as of blaze-builder-0.4
    -> Int           -- ^ Size of the first buffer to be used and copied for
                     -- larger resulting sequences
    -> Builder       -- ^ Builder to run.
    -> L.ByteString  -- ^ Lazy bytestring to output after the builder is
                     -- finished.
    -> L.ByteString  -- ^ Resulting lazy bytestring
toLazyByteStringWith :: Int -> Int -> Int -> Builder -> ByteString -> ByteString
toLazyByteStringWith Int
bufSize Int
_minBufSize Int
firstBufSize Builder
builder ByteString
k =
    AllocationStrategy -> ByteString -> Builder -> ByteString
B.toLazyByteStringWith (Int -> Int -> AllocationStrategy
B.safeStrategy Int
firstBufSize Int
bufSize) ByteString
k Builder
builder

-- | Run a 'Write' to produce a strict 'S.ByteString'.
-- This is equivalent to @('toByteString' . 'fromWrite')@, but is more
-- efficient because it uses just one appropriately-sized buffer.
writeToByteString :: W.Write -> S.ByteString
writeToByteString :: Write -> ByteString
writeToByteString !Write
w = forall a. IO a -> a
unsafeDupablePerformIO forall a b. (a -> b) -> a -> b
$ do
    ForeignPtr Word8
fptr <- forall a. Int -> IO (ForeignPtr a)
S.mallocByteString (Write -> Int
W.getBound Write
w)
    Int
len <- forall a b. ForeignPtr a -> (Ptr a -> IO b) -> IO b
withForeignPtr ForeignPtr Word8
fptr forall a b. (a -> b) -> a -> b
$ \Ptr Word8
ptr -> do
        Ptr Word8
end <- Write -> Ptr Word8 -> IO (Ptr Word8)
W.runWrite Write
w Ptr Word8
ptr
        forall (m :: * -> *) a. Monad m => a -> m a
return forall a b. (a -> b) -> a -> b
$! Ptr Word8
end forall a b. Ptr a -> Ptr b -> Int
`minusPtr` Ptr Word8
ptr
    forall (m :: * -> *) a. Monad m => a -> m a
return forall a b. (a -> b) -> a -> b
$! ForeignPtr Word8 -> Int -> Int -> ByteString
S.fromForeignPtr ForeignPtr Word8
fptr Int
0 Int
len
{-# INLINE writeToByteString #-}