conduit-1.0.7.3: Streaming data processing library.

Safe HaskellNone

Data.Conduit

Contents

Description

If this is your first time with conduit, you should probably start with the tutorial: https://haskell.fpcomplete.com/user/snoyberg/library-documentation/conduit-overview.

Synopsis

Core interface

Types

type Source m o = ConduitM () o m ()Source

Provides a stream of output values, without consuming any input or producing a final result.

Since 0.5.0

type Conduit i m o = ConduitM i o m ()Source

Consumes a stream of input values and produces a stream of output values, without producing a final result.

Since 0.5.0

type Sink i m r = ConduitM i Void m rSource

Consumes a stream of input values and produces a final result, without producing any output.

Since 0.5.0

data ConduitM i o m r Source

Core datatype of the conduit package. This type represents a general component which can consume a stream of input values i, produce a stream of output values o, perform actions in the m monad, and produce a final result r. The type synonyms provided here are simply wrappers around this type.

Since 1.0.0

Instances

MonadRWS r w s m => MonadRWS r w s (ConduitM i o m) 
MonadBase base m => MonadBase base (ConduitM i o m) 
MonadError e m => MonadError e (ConduitM i o m) 
MonadReader r m => MonadReader r (ConduitM i o m) 
MonadState s m => MonadState s (ConduitM i o m) 
MonadWriter w m => MonadWriter w (ConduitM i o m) 
MFunctor (ConduitM i o) 
MonadTrans (ConduitM i o) 
Monad m => Monad (ConduitM i o m) 
Monad m => Functor (ConduitM i o m) 
Monad m => Applicative (ConduitM i o m) 
MonadIO m => MonadIO (ConduitM i o m) 
MonadResource m => MonadResource (ConduitM i o m) 
MonadThrow m => MonadThrow (ConduitM i o m) 
MonadActive m => MonadActive (ConduitM i o m) 
Monad m => Monoid (ConduitM i o m ()) 

Connect/fuse operators

($$) :: Monad m => Source m a -> Sink a m b -> m bSource

The connect operator, which pulls data from a source and pushes to a sink. If you would like to keep the Source open to be used for other operations, use the connect-and-resume operator $$+.

Since 0.4.0

($=) :: Monad m => Source m a -> Conduit a m b -> Source m bSource

Left fuse, combining a source and a conduit together into a new source.

Both the Source and Conduit will be closed when the newly-created Source is closed.

Leftover data from the Conduit will be discarded.

Since 0.4.0

(=$) :: Monad m => Conduit a m b -> Sink b m c -> Sink a m cSource

Right fuse, combining a conduit and a sink together into a new sink.

Both the Conduit and Sink will be closed when the newly-created Sink is closed.

Leftover data returned from the Sink will be discarded.

Since 0.4.0

(=$=) :: Monad m => Conduit a m b -> ConduitM b c m r -> ConduitM a c m rSource

Fusion operator, combining two Conduits together into a new Conduit.

Both Conduits will be closed when the newly-created Conduit is closed.

Leftover data returned from the right Conduit will be discarded.

Since 0.4.0

Primitives

await :: Monad m => Consumer i m (Maybe i)Source

Wait for a single input value from upstream. If no data is available, returns Nothing.

Since 0.5.0

yieldSource

Arguments

:: Monad m 
=> o

output value

-> ConduitM i o m () 

Send a value downstream to the next component to consume. If the downstream component terminates, this call will never return control. If you would like to register a cleanup function, please use yieldOr instead.

Since 0.5.0

leftover :: i -> ConduitM i o m ()Source

Provide a single piece of leftover input to be consumed by the next component in the current monadic binding.

Note: it is highly encouraged to only return leftover values from input already consumed from upstream.

Since 0.5.0

Finalization

bracketP :: MonadResource m => IO a -> (a -> IO ()) -> (a -> ConduitM i o m r) -> ConduitM i o m rSource

Perform some allocation and run an inner component. Two guarantees are given about resource finalization:

  1. It will be prompt. The finalization will be run as early as possible.
  2. It is exception safe. Due to usage of resourcet, the finalization will be run in the event of any exceptions.

Since 0.5.0

addCleanup :: Monad m => (Bool -> m ()) -> ConduitM i o m r -> ConduitM i o m rSource

Add some code to be run when the given component cleans up.

The supplied cleanup function will be given a True if the component ran to completion, or False if it terminated early due to a downstream component terminating.

Note that this function is not exception safe. For that, please use bracketP.

Since 0.4.1

yieldOrSource

Arguments

:: Monad m 
=> o 
-> m ()

finalizer

-> ConduitM i o m () 

Similar to yield, but additionally takes a finalizer to be run if the downstream component terminates.

Since 0.5.0

Generalized conduit types

type Producer m o = forall i. ConduitM i o m ()Source

A component which produces a stream of output values, regardless of the input stream. A Producer is a generalization of a Source, and can be used as either a Source or a Conduit.

Since 1.0.0

type Consumer i m r = forall o. ConduitM i o m rSource

A component which consumes a stream of input values and produces a final result, regardless of the output stream. A Consumer is a generalization of a Sink, and can be used as either a Sink or a Conduit.

Since 1.0.0

toProducer :: Monad m => Source m a -> Producer m aSource

Generalize a Source to a Producer.

Since 1.0.0

toConsumer :: Monad m => Sink a m b -> Consumer a m bSource

Generalize a Sink to a Consumer.

Since 1.0.0

Utility functions

awaitForever :: Monad m => (i -> ConduitM i o m r) -> ConduitM i o m ()Source

Wait for input forever, calling the given inner component for each piece of new input. Returns the upstream result type.

This function is provided as a convenience for the common pattern of awaiting input, checking if it's Just and then looping.

Since 0.5.0

transPipe :: Monad m => (forall a. m a -> n a) -> ConduitM i o m r -> ConduitM i o n rSource

Transform the monad that a ConduitM lives in.

Note that the monad transforming function will be run multiple times, resulting in unintuitive behavior in some cases. For a fuller treatment, please see:

https://github.com/snoyberg/conduit/wiki/Dealing-with-monad-transformers

This function is just a synonym for hoist.

Since 0.4.0

mapOutput :: Monad m => (o1 -> o2) -> ConduitM i o1 m r -> ConduitM i o2 m rSource

Apply a function to all the output values of a ConduitM.

This mimics the behavior of fmap for a Source and Conduit in pre-0.4 days. It can also be simulated by fusing with the map conduit from Data.Conduit.List.

Since 0.4.1

mapOutputMaybe :: Monad m => (o1 -> Maybe o2) -> ConduitM i o1 m r -> ConduitM i o2 m rSource

Same as mapOutput, but use a function that returns Maybe values.

Since 0.5.0

mapInputSource

Arguments

:: Monad m 
=> (i1 -> i2)

map initial input to new input

-> (i2 -> Maybe i1)

map new leftovers to initial leftovers

-> ConduitM i2 o m r 
-> ConduitM i1 o m r 

Apply a function to all the input values of a ConduitM.

Since 0.5.0

Connect-and-resume

data ResumableSource m o Source

A Source which has been started, but has not yet completed.

This type contains both the current state of the Source, and the finalizer to be run to close it.

Since 0.5.0

($$+) :: Monad m => Source m a -> Sink a m b -> m (ResumableSource m a, b)Source

The connect-and-resume operator. This does not close the Source, but instead returns it to be used again. This allows a Source to be used incrementally in a large program, without forcing the entire program to live in the Sink monad.

Mnemonic: connect + do more.

Since 0.5.0

($$++) :: Monad m => ResumableSource m a -> Sink a m b -> m (ResumableSource m a, b)Source

Continue processing after usage of $$+.

Since 0.5.0

($$+-) :: Monad m => ResumableSource m a -> Sink a m b -> m bSource

Complete processing of a ResumableSource. This will run the finalizer associated with the ResumableSource. In order to guarantee process resource finalization, you must use this operator after using $$+ and $$++.

Since 0.5.0

unwrapResumable :: MonadIO m => ResumableSource m o -> m (Source m o, m ())Source

Unwraps a ResumableSource into a Source and a finalizer.

A ResumableSource represents a Source which has already been run, and therefore has a finalizer registered. As a result, if we want to turn it into a regular Source, we need to ensure that the finalizer will be run appropriately. By appropriately, I mean:

  • If a new finalizer is registered, the old one should not be called.
  • If the old one is called, it should not be called again.

This function returns both a Source and a finalizer which ensures that the above two conditions hold. Once you call that finalizer, the Source is invalidated and cannot be used.

Since 0.5.2

Flushing

data Flush a Source

Provide for a stream of data that can be flushed.

A number of Conduits (e.g., zlib compression) need the ability to flush the stream at some point. This provides a single wrapper datatype to be used in all such circumstances.

Since 0.3.0

Constructors

Chunk a 
Flush 

Instances

Functor Flush 
Eq a => Eq (Flush a) 
Ord a => Ord (Flush a) 
Show a => Show (Flush a) 

Convenience re-exports

data ResourceT m a

The Resource transformer. This transformer keeps track of all registered actions, and calls them upon exit (via runResourceT). Actions may be registered via register, or resources may be allocated atomically via allocate. allocate corresponds closely to bracket.

Releasing may be performed before exit via the release function. This is a highly recommended optimization, as it will ensure that scarce resources are freed early. Note that calling release will deregister the action, so that a release action will only ever be called once.

Since 0.3.0

class (MonadThrow m, MonadUnsafeIO m, MonadIO m, Applicative m) => MonadResource m

A Monad which allows for safe resource allocation. In theory, any monad transformer stack included a ResourceT can be an instance of MonadResource.

Note: runResourceT has a requirement for a MonadBaseControl IO m monad, which allows control operations to be lifted. A MonadResource does not have this requirement. This means that transformers such as ContT can be an instance of MonadResource. However, the ContT wrapper will need to be unwrapped before calling runResourceT.

Since 0.3.0

class Monad m => MonadThrow m where

A Monad which can throw exceptions. Note that this does not work in a vanilla ST or Identity monad. Instead, you should use the ExceptionT transformer in your stack if you are dealing with a non-IO base monad.

Since 0.3.0

Methods

monadThrow :: Exception e => e -> m a

class Monad m => MonadUnsafeIO m where

A Monad based on some monad which allows running of some IO actions, via unsafe calls. This applies to IO and ST, for instance.

Since 0.3.0

Methods

unsafeLiftIO :: IO a -> m a

runResourceT :: MonadBaseControl IO m => ResourceT m a -> m a

Unwrap a ResourceT transformer, and call all registered release actions.

Note that there is some reference counting involved due to resourceForkIO. If multiple threads are sharing the same collection of resources, only the last call to runResourceT will deallocate the resources.

Since 0.3.0

newtype ExceptionT m a

The express purpose of this transformer is to allow non-IO-based monad stacks to catch exceptions via the MonadThrow typeclass.

Since 0.3.0

Constructors

ExceptionT 

runExceptionT_ :: Monad m => ExceptionT m a -> m a

Same as runExceptionT, but immediately throw any exception returned.

Since 0.3.0

runException :: ExceptionT Identity a -> Either SomeException a

Run an ExceptionT Identity stack.

Since 0.4.2

runException_ :: ExceptionT Identity a -> a

Run an ExceptionT Identity stack, but immediately throw any exception returned.

Since 0.4.2