Copyright | (c) 2013-2023 Brendan Hay |
---|---|
License | Mozilla Public License, v. 2.0. |
Maintainer | Brendan Hay |
Stability | auto-generated |
Portability | non-portable (GHC extensions) |
Safe Haskell | Safe-Inferred |
Language | Haskell2010 |
Disassociates a connection from a link aggregation group (LAG). The connection is interrupted and re-established as a standalone connection (the connection is not deleted; to delete the connection, use the DeleteConnection request). If the LAG has associated virtual interfaces or hosted connections, they remain associated with the LAG. A disassociated connection owned by an Direct Connect Partner is automatically converted to an interconnect.
If disassociating the connection would cause the LAG to fall below its setting for minimum number of operational connections, the request fails, except when it's the last member of the LAG. If all connections are disassociated, the LAG continues to exist as an empty LAG with no physical connections.
Synopsis
- data DisassociateConnectionFromLag = DisassociateConnectionFromLag' {
- connectionId :: Text
- lagId :: Text
- newDisassociateConnectionFromLag :: Text -> Text -> DisassociateConnectionFromLag
- disassociateConnectionFromLag_connectionId :: Lens' DisassociateConnectionFromLag Text
- disassociateConnectionFromLag_lagId :: Lens' DisassociateConnectionFromLag Text
- data Connection = Connection' {
- awsDevice :: Maybe Text
- awsDeviceV2 :: Maybe Text
- awsLogicalDeviceId :: Maybe Text
- bandwidth :: Maybe Text
- connectionId :: Maybe Text
- connectionName :: Maybe Text
- connectionState :: Maybe ConnectionState
- encryptionMode :: Maybe Text
- hasLogicalRedundancy :: Maybe HasLogicalRedundancy
- jumboFrameCapable :: Maybe Bool
- lagId :: Maybe Text
- loaIssueTime :: Maybe POSIX
- location :: Maybe Text
- macSecCapable :: Maybe Bool
- macSecKeys :: Maybe [MacSecKey]
- ownerAccount :: Maybe Text
- partnerName :: Maybe Text
- portEncryptionStatus :: Maybe Text
- providerName :: Maybe Text
- region :: Maybe Text
- tags :: Maybe (NonEmpty Tag)
- vlan :: Maybe Int
- newConnection :: Connection
- connection_awsDevice :: Lens' Connection (Maybe Text)
- connection_awsDeviceV2 :: Lens' Connection (Maybe Text)
- connection_awsLogicalDeviceId :: Lens' Connection (Maybe Text)
- connection_bandwidth :: Lens' Connection (Maybe Text)
- connection_connectionId :: Lens' Connection (Maybe Text)
- connection_connectionName :: Lens' Connection (Maybe Text)
- connection_connectionState :: Lens' Connection (Maybe ConnectionState)
- connection_encryptionMode :: Lens' Connection (Maybe Text)
- connection_hasLogicalRedundancy :: Lens' Connection (Maybe HasLogicalRedundancy)
- connection_jumboFrameCapable :: Lens' Connection (Maybe Bool)
- connection_lagId :: Lens' Connection (Maybe Text)
- connection_loaIssueTime :: Lens' Connection (Maybe UTCTime)
- connection_location :: Lens' Connection (Maybe Text)
- connection_macSecCapable :: Lens' Connection (Maybe Bool)
- connection_macSecKeys :: Lens' Connection (Maybe [MacSecKey])
- connection_ownerAccount :: Lens' Connection (Maybe Text)
- connection_partnerName :: Lens' Connection (Maybe Text)
- connection_portEncryptionStatus :: Lens' Connection (Maybe Text)
- connection_providerName :: Lens' Connection (Maybe Text)
- connection_region :: Lens' Connection (Maybe Text)
- connection_tags :: Lens' Connection (Maybe (NonEmpty Tag))
- connection_vlan :: Lens' Connection (Maybe Int)
Creating a Request
data DisassociateConnectionFromLag Source #
See: newDisassociateConnectionFromLag
smart constructor.
DisassociateConnectionFromLag' | |
|
Instances
newDisassociateConnectionFromLag Source #
Create a value of DisassociateConnectionFromLag
with all optional fields omitted.
Use generic-lens or optics to modify other optional fields.
The following record fields are available, with the corresponding lenses provided for backwards compatibility:
DisassociateConnectionFromLag
, disassociateConnectionFromLag_connectionId
- The ID of the connection.
DisassociateConnectionFromLag
, disassociateConnectionFromLag_lagId
- The ID of the LAG.
Request Lenses
disassociateConnectionFromLag_connectionId :: Lens' DisassociateConnectionFromLag Text Source #
The ID of the connection.
disassociateConnectionFromLag_lagId :: Lens' DisassociateConnectionFromLag Text Source #
The ID of the LAG.
Destructuring the Response
data Connection Source #
Information about an Direct Connect connection.
See: newConnection
smart constructor.
Connection' | |
|
Instances
newConnection :: Connection Source #
Create a value of Connection
with all optional fields omitted.
Use generic-lens or optics to modify other optional fields.
The following record fields are available, with the corresponding lenses provided for backwards compatibility:
$sel:awsDevice:Connection'
, connection_awsDevice
- The Direct Connect endpoint on which the physical connection terminates.
$sel:awsDeviceV2:Connection'
, connection_awsDeviceV2
- The Direct Connect endpoint that terminates the physical connection.
$sel:awsLogicalDeviceId:Connection'
, connection_awsLogicalDeviceId
- The Direct Connect endpoint that terminates the logical connection. This
device might be different than the device that terminates the physical
connection.
$sel:bandwidth:Connection'
, connection_bandwidth
- The bandwidth of the connection.
$sel:connectionId:Connection'
, connection_connectionId
- The ID of the connection.
$sel:connectionName:Connection'
, connection_connectionName
- The name of the connection.
$sel:connectionState:Connection'
, connection_connectionState
- The state of the connection. The following are the possible values:
ordering
: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.requested
: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.pending
: The connection has been approved and is being initialized.available
: The network link is up and the connection is ready for use.down
: The network link is down.deleting
: The connection is being deleted.deleted
: The connection has been deleted.rejected
: A hosted connection in theordering
state enters therejected
state if it is deleted by the customer.unknown
: The state of the connection is not available.
$sel:encryptionMode:Connection'
, connection_encryptionMode
- The MAC Security (MACsec) connection encryption mode.
The valid values are no_encrypt
, should_encrypt
, and must_encrypt
.
$sel:hasLogicalRedundancy:Connection'
, connection_hasLogicalRedundancy
- Indicates whether the connection supports a secondary BGP peer in the
same address family (IPv4/IPv6).
$sel:jumboFrameCapable:Connection'
, connection_jumboFrameCapable
- Indicates whether jumbo frames (9001 MTU) are supported.
$sel:lagId:Connection'
, connection_lagId
- The ID of the LAG.
$sel:loaIssueTime:Connection'
, connection_loaIssueTime
- The time of the most recent call to DescribeLoa for this connection.
$sel:location:Connection'
, connection_location
- The location of the connection.
$sel:macSecCapable:Connection'
, connection_macSecCapable
- Indicates whether the connection supports MAC Security (MACsec).
$sel:macSecKeys:Connection'
, connection_macSecKeys
- The MAC Security (MACsec) security keys associated with the connection.
$sel:ownerAccount:Connection'
, connection_ownerAccount
- The ID of the Amazon Web Services account that owns the connection.
$sel:partnerName:Connection'
, connection_partnerName
- The name of the Direct Connect service provider associated with the
connection.
$sel:portEncryptionStatus:Connection'
, connection_portEncryptionStatus
- The MAC Security (MACsec) port link status of the connection.
The valid values are Encryption Up
, which means that there is an
active Connection Key Name, or Encryption Down
.
$sel:providerName:Connection'
, connection_providerName
- The name of the service provider associated with the connection.
$sel:region:Connection'
, connection_region
- The Amazon Web Services Region where the connection is located.
$sel:tags:Connection'
, connection_tags
- The tags associated with the connection.
$sel:vlan:Connection'
, connection_vlan
- The ID of the VLAN.
Response Lenses
connection_awsDevice :: Lens' Connection (Maybe Text) Source #
The Direct Connect endpoint on which the physical connection terminates.
connection_awsDeviceV2 :: Lens' Connection (Maybe Text) Source #
The Direct Connect endpoint that terminates the physical connection.
connection_awsLogicalDeviceId :: Lens' Connection (Maybe Text) Source #
The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.
connection_bandwidth :: Lens' Connection (Maybe Text) Source #
The bandwidth of the connection.
connection_connectionId :: Lens' Connection (Maybe Text) Source #
The ID of the connection.
connection_connectionName :: Lens' Connection (Maybe Text) Source #
The name of the connection.
connection_connectionState :: Lens' Connection (Maybe ConnectionState) Source #
The state of the connection. The following are the possible values:
ordering
: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.requested
: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.pending
: The connection has been approved and is being initialized.available
: The network link is up and the connection is ready for use.down
: The network link is down.deleting
: The connection is being deleted.deleted
: The connection has been deleted.rejected
: A hosted connection in theordering
state enters therejected
state if it is deleted by the customer.unknown
: The state of the connection is not available.
connection_encryptionMode :: Lens' Connection (Maybe Text) Source #
The MAC Security (MACsec) connection encryption mode.
The valid values are no_encrypt
, should_encrypt
, and must_encrypt
.
connection_hasLogicalRedundancy :: Lens' Connection (Maybe HasLogicalRedundancy) Source #
Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).
connection_jumboFrameCapable :: Lens' Connection (Maybe Bool) Source #
Indicates whether jumbo frames (9001 MTU) are supported.
connection_lagId :: Lens' Connection (Maybe Text) Source #
The ID of the LAG.
connection_loaIssueTime :: Lens' Connection (Maybe UTCTime) Source #
The time of the most recent call to DescribeLoa for this connection.
connection_location :: Lens' Connection (Maybe Text) Source #
The location of the connection.
connection_macSecCapable :: Lens' Connection (Maybe Bool) Source #
Indicates whether the connection supports MAC Security (MACsec).
connection_macSecKeys :: Lens' Connection (Maybe [MacSecKey]) Source #
The MAC Security (MACsec) security keys associated with the connection.
connection_ownerAccount :: Lens' Connection (Maybe Text) Source #
The ID of the Amazon Web Services account that owns the connection.
connection_partnerName :: Lens' Connection (Maybe Text) Source #
The name of the Direct Connect service provider associated with the connection.
connection_portEncryptionStatus :: Lens' Connection (Maybe Text) Source #
The MAC Security (MACsec) port link status of the connection.
The valid values are Encryption Up
, which means that there is an
active Connection Key Name, or Encryption Down
.
connection_providerName :: Lens' Connection (Maybe Text) Source #
The name of the service provider associated with the connection.
connection_region :: Lens' Connection (Maybe Text) Source #
The Amazon Web Services Region where the connection is located.
connection_tags :: Lens' Connection (Maybe (NonEmpty Tag)) Source #
The tags associated with the connection.
connection_vlan :: Lens' Connection (Maybe Int) Source #
The ID of the VLAN.