Copyright | Copyright (c) 2009-2017 David Sorokin <david.sorokin@gmail.com> |
---|---|

License | BSD3 |

Maintainer | David Sorokin <david.sorokin@gmail.com> |

Stability | experimental |

Safe Haskell | None |

Language | Haskell2010 |

Tested with: GHC 8.0.1

The infinite stream of data in time.

- newtype Stream a = Cons {}
- emptyStream :: Stream a
- mergeStreams :: Stream a -> Stream a -> Stream a
- mergeQueuedStreams :: EnqueueStrategy s => s -> Stream a -> Stream a -> Stream a
- mergePriorityStreams :: PriorityQueueStrategy s p => s -> Stream (p, a) -> Stream (p, a) -> Stream a
- concatStreams :: [Stream a] -> Stream a
- concatQueuedStreams :: EnqueueStrategy s => s -> [Stream a] -> Stream a
- concatPriorityStreams :: PriorityQueueStrategy s p => s -> [Stream (p, a)] -> Stream a
- splitStream :: Int -> Stream a -> Simulation [Stream a]
- splitStreamQueueing :: EnqueueStrategy s => s -> Int -> Stream a -> Simulation [Stream a]
- splitStreamPrioritising :: PriorityQueueStrategy s p => s -> [Stream p] -> Stream a -> Simulation [Stream a]
- splitStreamFiltering :: [a -> Event Bool] -> Stream a -> Simulation [Stream a]
- splitStreamFilteringQueueing :: EnqueueStrategy s => s -> [a -> Event Bool] -> Stream a -> Simulation [Stream a]
- streamUsingId :: ProcessId -> Stream a -> Stream a
- prefetchStream :: Stream a -> Stream a
- delayStream :: a -> Stream a -> Stream a
- arrivalStream :: Stream a -> Stream (Arrival a)
- memoStream :: Stream a -> Simulation (Stream a)
- zipStreamSeq :: Stream a -> Stream b -> Stream (a, b)
- zipStreamParallel :: Stream a -> Stream b -> Stream (a, b)
- zip3StreamSeq :: Stream a -> Stream b -> Stream c -> Stream (a, b, c)
- zip3StreamParallel :: Stream a -> Stream b -> Stream c -> Stream (a, b, c)
- unzipStream :: Stream (a, b) -> Simulation (Stream a, Stream b)
- streamSeq :: [Stream a] -> Stream [a]
- streamParallel :: [Stream a] -> Stream [a]
- consumeStream :: (a -> Process ()) -> Stream a -> Process ()
- sinkStream :: Stream a -> Process ()
- repeatProcess :: Process a -> Stream a
- mapStream :: (a -> b) -> Stream a -> Stream b
- mapStreamM :: (a -> Process b) -> Stream a -> Stream b
- accumStream :: (acc -> a -> Process (acc, b)) -> acc -> Stream a -> Stream b
- apStream :: Stream (a -> b) -> Stream a -> Stream b
- apStreamM :: Stream (a -> Process b) -> Stream a -> Stream b
- filterStream :: (a -> Bool) -> Stream a -> Stream a
- filterStreamM :: (a -> Process Bool) -> Stream a -> Stream a
- takeStream :: Int -> Stream a -> Stream a
- takeStreamWhile :: (a -> Bool) -> Stream a -> Stream a
- takeStreamWhileM :: (a -> Process Bool) -> Stream a -> Stream a
- dropStream :: Int -> Stream a -> Stream a
- dropStreamWhile :: (a -> Bool) -> Stream a -> Stream a
- dropStreamWhileM :: (a -> Process Bool) -> Stream a -> Stream a
- singletonStream :: a -> Stream a
- joinStream :: Process (Stream a) -> Stream a
- failoverStream :: [Stream a] -> Stream a
- signalStream :: Signal a -> Composite (Stream a)
- streamSignal :: Stream a -> Composite (Signal a)
- queuedSignalStream :: (a -> Event ()) -> Process a -> Signal a -> Composite (Stream a)
- leftStream :: Stream (Either a b) -> Stream a
- rightStream :: Stream (Either a b) -> Stream b
- replaceLeftStream :: Stream (Either a b) -> Stream c -> Stream (Either c b)
- replaceRightStream :: Stream (Either a b) -> Stream c -> Stream (Either a c)
- partitionEitherStream :: Stream (Either a b) -> Simulation (Stream a, Stream b)
- cloneStream :: Int -> Stream a -> Simulation [Stream a]
- firstArrivalStream :: Int -> Stream a -> Stream a
- lastArrivalStream :: Int -> Stream a -> Stream a
- assembleAccumStream :: (acc -> a -> Process (acc, Maybe b)) -> acc -> Stream a -> Stream b
- traceStream :: Maybe String -> Maybe String -> Stream a -> Stream a

# Stream Type

Represents an infinite stream of data in time, some kind of the cons cell.

# Merging and Splitting Stream

emptyStream :: Stream a Source #

An empty stream that never returns data.

mergeStreams :: Stream a -> Stream a -> Stream a Source #

Merge two streams applying the `FCFS`

strategy for enqueuing the input data.

:: EnqueueStrategy s | |

=> s | the strategy applied for enqueuing the input data |

-> Stream a | the fist input stream |

-> Stream a | the second input stream |

-> Stream a | the output combined stream |

Merge two streams.

If you don't know what the strategy to apply, then you probably
need the `FCFS`

strategy, or function `mergeStreams`

that
does namely this.

:: PriorityQueueStrategy s p | |

=> s | the strategy applied for enqueuing the input data |

-> Stream (p, a) | the fist input stream |

-> Stream (p, a) | the second input stream |

-> Stream a | the output combined stream |

Merge two priority streams.

concatStreams :: [Stream a] -> Stream a Source #

Concatenate the input streams applying the `FCFS`

strategy and
producing one output stream.

:: EnqueueStrategy s | |

=> s | the strategy applied for enqueuing the input data |

-> [Stream a] | the input stream |

-> Stream a | the combined output stream |

Concatenate the input streams producing one output stream.

If you don't know what the strategy to apply, then you probably
need the `FCFS`

strategy, or function `concatStreams`

that
does namely this.

concatPriorityStreams Source #

:: PriorityQueueStrategy s p | |

=> s | the strategy applied for enqueuing the input data |

-> [Stream (p, a)] | the input stream |

-> Stream a | the combined output stream |

Concatenate the input priority streams producing one output stream.

splitStream :: Int -> Stream a -> Simulation [Stream a] Source #

Split the input stream into the specified number of output streams
after applying the `FCFS`

strategy for enqueuing the output requests.

:: EnqueueStrategy s | |

=> s | the strategy applied for enqueuing the output requests |

-> Int | the number of output streams |

-> Stream a | the input stream |

-> Simulation [Stream a] | the splitted output streams |

Split the input stream into the specified number of output streams.

If you don't know what the strategy to apply, then you probably
need the `FCFS`

strategy, or function `splitStream`

that
does namely this.

splitStreamPrioritising Source #

:: PriorityQueueStrategy s p | |

=> s | the strategy applied for enqueuing the output requests |

-> [Stream p] | the streams of priorities |

-> Stream a | the input stream |

-> Simulation [Stream a] | the splitted output streams |

Split the input stream into a list of output streams using the specified priorities.

splitStreamFiltering :: [a -> Event Bool] -> Stream a -> Simulation [Stream a] Source #

Split the input stream into the specified number of output streams
after filtering and applying the `FCFS`

strategy for enqueuing the output requests.

splitStreamFilteringQueueing Source #

:: EnqueueStrategy s | |

=> s | the strategy applied for enqueuing the output requests |

-> [a -> Event Bool] | the filters for output streams |

-> Stream a | the input stream |

-> Simulation [Stream a] | the splitted output streams |

Split the input stream into the specified number of output streams after filtering.

If you don't know what the strategy to apply, then you probably
need the `FCFS`

strategy, or function `splitStreamFiltering`

that
does namely this.

# Specifying Identifier

streamUsingId :: ProcessId -> Stream a -> Stream a Source #

Create a stream that will use the specified process identifier.
It can be useful to refer to the underlying `Process`

computation which
can be passivated, interrupted, canceled and so on. See also the
`processUsingId`

function for more details.

# Prefetching and Delaying Stream

prefetchStream :: Stream a -> Stream a Source #

Prefetch the input stream requesting for one more data item in advance while the last received item is not yet fully processed in the chain of streams, usually by the processors.

You can think of this as the prefetched stream could place its latest data item in some temporary space for later use, which is very useful for modeling a sequence of separate and independent work places.

delayStream :: a -> Stream a -> Stream a Source #

Delay the stream by one step using the specified initial value.

# Stream Arriving

arrivalStream :: Stream a -> Stream (Arrival a) Source #

Transform a stream so that the resulting stream returns a sequence of arrivals saving the information about the time points at which the original stream items were received by demand.

# Memoizing, Zipping and Uzipping Stream

memoStream :: Stream a -> Simulation (Stream a) Source #

Memoize the stream so that it would always return the same data within the simulation run.

zipStreamSeq :: Stream a -> Stream b -> Stream (a, b) Source #

Zip two streams trying to get data sequentially.

zipStreamParallel :: Stream a -> Stream b -> Stream (a, b) Source #

Zip two streams trying to get data as soon as possible, launching the sub-processes in parallel.

zip3StreamSeq :: Stream a -> Stream b -> Stream c -> Stream (a, b, c) Source #

Zip three streams trying to get data sequentially.

zip3StreamParallel :: Stream a -> Stream b -> Stream c -> Stream (a, b, c) Source #

Zip three streams trying to get data as soon as possible, launching the sub-processes in parallel.

unzipStream :: Stream (a, b) -> Simulation (Stream a, Stream b) Source #

Unzip the stream.

streamSeq :: [Stream a] -> Stream [a] Source #

To form each new portion of data for the output stream, read data sequentially from the input streams.

This is a generalization of `zipStreamSeq`

.

streamParallel :: [Stream a] -> Stream [a] Source #

To form each new portion of data for the output stream, read data from the input streams in parallel.

This is a generalization of `zipStreamParallel`

.

# Consuming and Sinking Stream

consumeStream :: (a -> Process ()) -> Stream a -> Process () Source #

Consume the stream. It returns a process that infinitely reads data from the stream and then redirects them to the provided function. It is useful for modeling the process of enqueueing data in the queue from the input stream.

sinkStream :: Stream a -> Process () Source #

Sink the stream. It returns a process that infinitely reads data from the stream. The resulting computation can be a moving force to simulate the whole system of the interconnected streams and processors.

# Useful Combinators

repeatProcess :: Process a -> Stream a Source #

Return a stream of values generated by the specified process.

mapStream :: (a -> b) -> Stream a -> Stream b Source #

Map the stream according the specified function.

accumStream :: (acc -> a -> Process (acc, b)) -> acc -> Stream a -> Stream b Source #

Accumulator that outputs a value determined by the supplied function.

filterStream :: (a -> Bool) -> Stream a -> Stream a Source #

Filter only those data values that satisfy to the specified predicate.

filterStreamM :: (a -> Process Bool) -> Stream a -> Stream a Source #

Filter only those data values that satisfy to the specified predicate.

takeStream :: Int -> Stream a -> Stream a Source #

Return the prefix of the stream of the specified length.

takeStreamWhile :: (a -> Bool) -> Stream a -> Stream a Source #

Return the longest prefix of the stream of elements that satisfy the predicate.

takeStreamWhileM :: (a -> Process Bool) -> Stream a -> Stream a Source #

Return the longest prefix of the stream of elements that satisfy the computation.

dropStream :: Int -> Stream a -> Stream a Source #

Return the suffix of the stream after the specified first elements.

dropStreamWhile :: (a -> Bool) -> Stream a -> Stream a Source #

Return the suffix of the stream of elements remaining after `takeStreamWhile`

.

dropStreamWhileM :: (a -> Process Bool) -> Stream a -> Stream a Source #

Return the suffix of the stream of elements remaining after `takeStreamWhileM`

.

singletonStream :: a -> Stream a Source #

Return a stream consisting of exactly one element and inifinite tail.

joinStream :: Process (Stream a) -> Stream a Source #

Removes one level of the computation, projecting its bound stream into the outer level.

# Failover

failoverStream :: [Stream a] -> Stream a Source #

Takes the next stream from the list after the current stream fails because of cancelling the underlying process.

# Integrating with Signals

signalStream :: Signal a -> Composite (Stream a) Source #

Return a stream of values triggered by the specified signal.

Since the time at which the values of the stream are requested for may differ from
the time at which the signal is triggered, it can be useful to apply the `arrivalSignal`

function to add the information about the time points at which the signal was
actually received.

The point is that the `Stream`

is requested outside, while the `Signal`

is triggered
inside. They are different by nature. The former is passive, while the latter is active.

The resulting stream may be a root of space leak as it uses an internal unbounded queue to store
the values received from the signal. The oldest value is dequeued each time we request
the stream and it is returned within the computation. Consider using `queuedSignalStream`

that
allows specifying the bounded queue in case of need.

streamSignal :: Stream a -> Composite (Signal a) Source #

Return a computation of the disposable signal that triggers values from the specified stream,
each time the next value of the stream is received within the underlying `Process`

computation.

:: (a -> Event ()) | enqueue |

-> Process a | dequeue |

-> Signal a | the input signal |

-> Composite (Stream a) | the output stream |

Like `signalStream`

but allows specifying an arbitrary queue instead of the unbounded queue.

# Utilities

replaceLeftStream :: Stream (Either a b) -> Stream c -> Stream (Either c b) Source #

Replace the `Left`

values.

replaceRightStream :: Stream (Either a b) -> Stream c -> Stream (Either a c) Source #

Replace the `Right`

values.

partitionEitherStream :: Stream (Either a b) -> Simulation (Stream a, Stream b) Source #

Partition the stream of `Either`

values into two streams.

# Assemblying Streams

cloneStream :: Int -> Stream a -> Simulation [Stream a] Source #

Create the specified number of equivalent clones of the input stream.

firstArrivalStream :: Int -> Stream a -> Stream a Source #

Return a stream of first arrivals after assembling the specified number of elements.

lastArrivalStream :: Int -> Stream a -> Stream a Source #

Return a stream of last arrivals after assembling the specified number of elements.

assembleAccumStream :: (acc -> a -> Process (acc, Maybe b)) -> acc -> Stream a -> Stream b Source #

Assemble an accumulated stream using the supplied function.