Copyright | Copyright (c) 2009-2017 David Sorokin <david.sorokin@gmail.com> |
---|---|

License | BSD3 |

Maintainer | David Sorokin <david.sorokin@gmail.com> |

Stability | experimental |

Safe Haskell | None |

Language | Haskell2010 |

- Process Monad
- Running Process
- Spawning Processes
- Enqueuing Process
- Creating Process Identifier
- Holding, Interrupting, Passivating and Canceling Process
- Awaiting Signal
- Preemption
- Yield of Process
- Process Timeout
- Parallelizing Processes
- Exception Handling
- Utilities
- Memoizing Process
- Never Ending Process
- Retrying Computation
- GoTo Statement
- Debugging

Tested with: GHC 8.0.1

A value in the `Process`

monad represents a discontinuous process that
can suspend in any simulation time point and then resume later in the same
or another time point.

The process of this type can involve the `Event`

, `Dynamics`

and `Simulation`

computations. Moreover, a value in the `Process`

monad can be run within
the `Event`

computation.

A value of the `ProcessId`

type is just an identifier of such a process.

- data ProcessId m
- newtype Process m a = Process (ProcessId m -> Cont m a)
- class ProcessLift t m where
- invokeProcess :: ProcessId m -> Process m a -> Cont m a
- runProcess :: MonadDES m => Process m () -> Event m ()
- runProcessUsingId :: MonadDES m => ProcessId m -> Process m () -> Event m ()
- runProcessInStartTime :: MonadDES m => Process m () -> Simulation m ()
- runProcessInStartTimeUsingId :: MonadDES m => ProcessId m -> Process m () -> Simulation m ()
- runProcessInStopTime :: MonadDES m => Process m () -> Simulation m ()
- runProcessInStopTimeUsingId :: MonadDES m => ProcessId m -> Process m () -> Simulation m ()
- spawnProcess :: MonadDES m => Process m () -> Process m ()
- spawnProcessUsingId :: MonadDES m => ProcessId m -> Process m () -> Process m ()
- spawnProcessWith :: MonadDES m => ContCancellation -> Process m () -> Process m ()
- spawnProcessUsingIdWith :: MonadDES m => ContCancellation -> ProcessId m -> Process m () -> Process m ()
- enqueueProcess :: MonadDES m => Double -> Process m () -> Event m ()
- enqueueProcessUsingId :: MonadDES m => Double -> ProcessId m -> Process m () -> Event m ()
- newProcessId :: MonadDES m => Simulation m (ProcessId m)
- processId :: MonadDES m => Process m (ProcessId m)
- processUsingId :: MonadDES m => ProcessId m -> Process m a -> Process m a
- holdProcess :: MonadDES m => Double -> Process m ()
- interruptProcess :: MonadDES m => ProcessId m -> Event m ()
- processInterrupted :: MonadDES m => ProcessId m -> Event m Bool
- processInterruptionTime :: MonadDES m => ProcessId m -> Event m (Maybe Double)
- passivateProcess :: MonadDES m => Process m ()
- passivateProcessBefore :: MonadDES m => Event m () -> Process m ()
- processPassive :: MonadDES m => ProcessId m -> Event m Bool
- reactivateProcess :: MonadDES m => ProcessId m -> Event m ()
- reactivateProcessImmediately :: MonadDES m => ProcessId m -> Event m ()
- cancelProcessWithId :: MonadDES m => ProcessId m -> Event m ()
- cancelProcess :: MonadDES m => Process m a
- processCancelled :: MonadDES m => ProcessId m -> Event m Bool
- processCancelling :: MonadDES m => ProcessId m -> Signal m ()
- whenCancellingProcess :: MonadDES m => Event m () -> Process m ()
- processAwait :: MonadDES m => Signal m a -> Process m a
- processPreemptionBegin :: MonadDES m => ProcessId m -> Event m ()
- processPreemptionEnd :: MonadDES m => ProcessId m -> Event m ()
- processPreemptionBeginning :: MonadDES m => ProcessId m -> Signal m ()
- processPreemptionEnding :: MonadDES m => ProcessId m -> Signal m ()
- processYield :: MonadDES m => Process m ()
- timeoutProcess :: MonadDES m => Double -> Process m a -> Process m (Maybe a)
- timeoutProcessUsingId :: MonadDES m => Double -> ProcessId m -> Process m a -> Process m (Maybe a)
- processParallel :: MonadDES m => [Process m a] -> Process m [a]
- processParallelUsingIds :: MonadDES m => [(ProcessId m, Process m a)] -> Process m [a]
- processParallel_ :: MonadDES m => [Process m a] -> Process m ()
- processParallelUsingIds_ :: MonadDES m => [(ProcessId m, Process m a)] -> Process m ()
- catchProcess :: (MonadDES m, Exception e) => Process m a -> (e -> Process m a) -> Process m a
- finallyProcess :: MonadDES m => Process m a -> Process m b -> Process m a
- throwProcess :: (MonadDES m, Exception e) => e -> Process m a
- zipProcessParallel :: MonadDES m => Process m a -> Process m b -> Process m (a, b)
- zip3ProcessParallel :: MonadDES m => Process m a -> Process m b -> Process m c -> Process m (a, b, c)
- unzipProcess :: MonadDES m => Process m (a, b) -> Simulation m (Process m a, Process m b)
- memoProcess :: MonadDES m => Process m a -> Simulation m (Process m a)
- neverProcess :: MonadDES m => Process m a
- retryProcess :: MonadDES m => String -> Process m a
- transferProcess :: MonadDES m => Process m () -> Process m a
- traceProcess :: MonadDES m => String -> Process m a -> Process m a

# Process Monad

Specifies a discontinuous process that can suspend at any time and then resume later.

MonadDES m => MonadCompTrans Process m Source # | |

MonadDES m => ParameterLift Process m Source # | |

MonadDES m => SimulationLift Process m Source # | |

MonadDES m => DynamicsLift Process m Source # | |

MonadDES m => EventLift Process m Source # | |

MonadDES m => ProcessLift Process m Source # | |

MonadDES m => Monad (Process m) Source # | |

MonadDES m => Functor (Process m) Source # | |

MonadDES m => Applicative (Process m) Source # | |

(MonadDES m, MonadIO m) => MonadIO (Process m) Source # | |

class ProcessLift t m where Source #

A type class to lift the `Process`

computation into other computations.

liftProcess :: Process m a -> t m a Source #

Lift the specified `Process`

computation into another computation.

MonadDES m => ProcessLift Process m Source # | |

# Running Process

runProcess :: MonadDES m => Process m () -> Event m () Source #

Run immediately the process. A new `ProcessId`

identifier will be
assigned to the process.

To run the process at the specified time, you can use
the `enqueueProcess`

function.

runProcessUsingId :: MonadDES m => ProcessId m -> Process m () -> Event m () Source #

Run immediately the process with the specified identifier.
It will be more efficient than as you would specify the process identifier
with help of the `processUsingId`

combinator and then would call `runProcess`

.

To run the process at the specified time, you can use
the `enqueueProcessUsingId`

function.

runProcessInStartTime :: MonadDES m => Process m () -> Simulation m () Source #

Run the process in the start time immediately involving all pending
`CurrentEvents`

in the computation too.

runProcessInStartTimeUsingId :: MonadDES m => ProcessId m -> Process m () -> Simulation m () Source #

Run the process in the start time immediately using the specified identifier
and involving all pending `CurrentEvents`

in the computation too.

runProcessInStopTime :: MonadDES m => Process m () -> Simulation m () Source #

Run the process in the final simulation time immediately involving all
pending `CurrentEvents`

in the computation too.

runProcessInStopTimeUsingId :: MonadDES m => ProcessId m -> Process m () -> Simulation m () Source #

Run the process in the final simulation time immediately using
the specified identifier and involving all pending `CurrentEvents`

in the computation too.

# Spawning Processes

spawnProcess :: MonadDES m => Process m () -> Process m () Source #

Spawn the child process. In case of cancelling one of the processes, other process will be cancelled too.

spawnProcessUsingId :: MonadDES m => ProcessId m -> Process m () -> Process m () Source #

Spawn the child process specifying the process identifier. In case of cancelling one of the processes, other process will be cancelled too.

spawnProcessWith :: MonadDES m => ContCancellation -> Process m () -> Process m () Source #

Spawn the child process specifying how the child and parent processes should be cancelled in case of need.

spawnProcessUsingIdWith :: MonadDES m => ContCancellation -> ProcessId m -> Process m () -> Process m () Source #

Spawn the child process specifying how the child and parent processes should be cancelled in case of need.

# Enqueuing Process

enqueueProcess :: MonadDES m => Double -> Process m () -> Event m () Source #

Enqueue the process that will be then started at the specified time from the event queue.

enqueueProcessUsingId :: MonadDES m => Double -> ProcessId m -> Process m () -> Event m () Source #

Enqueue the process that will be then started at the specified time from the event queue.

# Creating Process Identifier

newProcessId :: MonadDES m => Simulation m (ProcessId m) Source #

Create a new process identifier.

processUsingId :: MonadDES m => ProcessId m -> Process m a -> Process m a Source #

Allow calling the process with the specified identifier.
It creates a nested process when canceling any of two, or raising an
`IO`

exception in any of the both, affects the `Process`

computation.

At the same time, the interruption has no such effect as it requires
explicit specifying the `ProcessId`

identifier of the nested process itself,
that is the nested process cannot be interrupted using only the parent
process identifier.

# Holding, Interrupting, Passivating and Canceling Process

holdProcess :: MonadDES m => Double -> Process m () Source #

Hold the process for the specified time period.

interruptProcess :: MonadDES m => ProcessId m -> Event m () Source #

Interrupt a process with the specified identifier if the process
is held by computation `holdProcess`

.

processInterrupted :: MonadDES m => ProcessId m -> Event m Bool Source #

Test whether the process with the specified identifier was interrupted.

processInterruptionTime :: MonadDES m => ProcessId m -> Event m (Maybe Double) Source #

Return the expected interruption time after finishing the `holdProcess`

computation,
which value may change if the corresponding process is preempted.

passivateProcess :: MonadDES m => Process m () Source #

Passivate the process.

passivateProcessBefore :: MonadDES m => Event m () -> Process m () Source #

Passivate the process before performing some action.

processPassive :: MonadDES m => ProcessId m -> Event m Bool Source #

Test whether the process with the specified identifier is passivated.

reactivateProcess :: MonadDES m => ProcessId m -> Event m () Source #

Reactivate a process with the specified identifier.

reactivateProcessImmediately :: MonadDES m => ProcessId m -> Event m () Source #

Reactivate a process with the specified identifier immediately.

cancelProcessWithId :: MonadDES m => ProcessId m -> Event m () Source #

Cancel a process with the specified identifier, interrupting it if needed.

cancelProcess :: MonadDES m => Process m a Source #

The process cancels itself.

processCancelled :: MonadDES m => ProcessId m -> Event m Bool Source #

Test whether the process with the specified identifier was cancelled.

processCancelling :: MonadDES m => ProcessId m -> Signal m () Source #

Return a signal that notifies about cancelling the process with the specified identifier.

whenCancellingProcess :: MonadDES m => Event m () -> Process m () Source #

Register a handler that will be invoked in case of cancelling the current process.

# Awaiting Signal

# Preemption

processPreemptionBegin :: MonadDES m => ProcessId m -> Event m () Source #

Preempt a process with the specified identifier.

processPreemptionEnd :: MonadDES m => ProcessId m -> Event m () Source #

Proceed with the process with the specified identifier after it was preempted with help of `preemptProcessBegin`

.

processPreemptionBeginning :: MonadDES m => ProcessId m -> Signal m () Source #

Return a signal when the process is preempted.

processPreemptionEnding :: MonadDES m => ProcessId m -> Signal m () Source #

Return a signal when the process is proceeded after it was preempted earlier.

# Yield of Process

processYield :: MonadDES m => Process m () Source #

# Process Timeout

timeoutProcess :: MonadDES m => Double -> Process m a -> Process m (Maybe a) Source #

Try to run the child process within the specified timeout.
If the process will finish successfully within this time interval then
the result wrapped in `Just`

will be returned; otherwise, the child process
will be cancelled and `Nothing`

will be returned.

If an exception is raised in the child process then it is propagated to the parent computation as well.

A cancellation of the child process doesn't lead to cancelling the parent process.
Then `Nothing`

is returned within the computation.

timeoutProcessUsingId :: MonadDES m => Double -> ProcessId m -> Process m a -> Process m (Maybe a) Source #

Try to run the child process with the given identifier within the specified timeout.
If the process will finish successfully within this time interval then
the result wrapped in `Just`

will be returned; otherwise, the child process
will be cancelled and `Nothing`

will be returned.

If an exception is raised in the child process then it is propagated to the parent computation as well.

A cancellation of the child process doesn't lead to cancelling the parent process.
Then `Nothing`

is returned within the computation.

# Parallelizing Processes

processParallel :: MonadDES m => [Process m a] -> Process m [a] Source #

Execute the specified computations in parallel within the current computation and return their results. The cancellation of any of the nested computations affects the current computation. The exception raised in any of the nested computations is propagated to the current computation as well.

Here word `parallel`

literally means that the computations are
actually executed on a single operating system thread but
they are processed simultaneously by the event queue.

New `ProcessId`

identifiers will be assigned to the started processes.

processParallelUsingIds :: MonadDES m => [(ProcessId m, Process m a)] -> Process m [a] Source #

Like `processParallel`

but allows specifying the process identifiers.
It will be more efficient than as you would specify the process identifiers
with help of the `processUsingId`

combinator and then would call `processParallel`

.

processParallel_ :: MonadDES m => [Process m a] -> Process m () Source #

Like `processParallel`

but ignores the result.

processParallelUsingIds_ :: MonadDES m => [(ProcessId m, Process m a)] -> Process m () Source #

Like `processParallelUsingIds`

but ignores the result.

# Exception Handling

catchProcess :: (MonadDES m, Exception e) => Process m a -> (e -> Process m a) -> Process m a Source #

Exception handling within `Process`

computations.

finallyProcess :: MonadDES m => Process m a -> Process m b -> Process m a Source #

A computation with finalization part.

throwProcess :: (MonadDES m, Exception e) => e -> Process m a Source #

Throw the exception with the further exception handling.

By some reason, an exception raised with help of the standard `throw`

function
is not handled properly within `Process`

computation, altough it will be still handled
if it will be wrapped in the `IO`

monad. Therefore, you should use specialised
functions like the stated one that use the `throw`

function but within the `IO`

computation,
which allows already handling the exception.

# Utilities

zipProcessParallel :: MonadDES m => Process m a -> Process m b -> Process m (a, b) Source #

Zip two parallel processes waiting for the both.

zip3ProcessParallel :: MonadDES m => Process m a -> Process m b -> Process m c -> Process m (a, b, c) Source #

Zip three parallel processes waiting for their results.

unzipProcess :: MonadDES m => Process m (a, b) -> Simulation m (Process m a, Process m b) Source #

Unzip the process using memoization so that the both returned processes could be applied independently, although they will refer to the same pair of values.

# Memoizing Process

memoProcess :: MonadDES m => Process m a -> Simulation m (Process m a) Source #

Memoize the process so that it would always return the same value within the simulation run.

# Never Ending Process

neverProcess :: MonadDES m => Process m a Source #

A computation that never computes the result. It behaves like a black hole for
the discontinuous process, although such a process can still be canceled outside
(see `cancelProcessWithId`

), but then only its finalization parts (see `finallyProcess`

)
will be called, usually, to release the resources acquired before.

# Retrying Computation

retryProcess :: MonadDES m => String -> Process m a Source #

Retry the current computation as possible, using the specified argument
as a `SimulationRetry`

exception message in case of failure.

# GoTo Statement

transferProcess :: MonadDES m => Process m () -> Process m a Source #

Like the GoTo statement it transfers the direction of computation,
but raises an exception when used within `catchProcess`

or `finallyProcess`

.