Network.AWS.ECS.ListTaskDefinitionFamilies

Returns a list of task definition families that are registered to your account (which may include task definition families that no longer have any ACTIVE task definition revisions).

You can filter out task definition families that do not contain any ACTIVE task definition revisions by setting the status parameter to ACTIVE . You can also filter the results with the familyPrefix parameter.

This operation returns paginated results.

Creating a Request

listTaskDefinitionFamilies :: ListTaskDefinitionFamilies

Creates a value of ListTaskDefinitionFamilies with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• ltdfStatus - The task definition family status with which to filter the ListTaskDefinitionFamilies results. By default, both ACTIVE and INACTIVE task definition families are listed. If this parameter is set to ACTIVE , only task definition families that have an ACTIVE task definition revision are returned. If this parameter is set to INACTIVE , only task definition families that do not have any ACTIVE task definition revisions are returned. If you paginate the resulting output, be sure to keep the status value constant in each subsequent request.
• ltdfFamilyPrefix - The familyPrefix is a string that is used to filter the results of ListTaskDefinitionFamilies . If you specify a familyPrefix , only task definition family names that begin with the familyPrefix string are returned.
• ltdfNextToken - The nextToken value returned from a previous paginated ListTaskDefinitionFamilies request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.
• ltdfMaxResults - The maximum number of task definition family results returned by ListTaskDefinitionFamilies in paginated output. When this parameter is used, ListTaskDefinitions only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTaskDefinitionFamilies request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListTaskDefinitionFamilies returns up to 100 results and a nextToken value if applicable.

data ListTaskDefinitionFamilies

See: listTaskDefinitionFamilies smart constructor.

Instances

Eq ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

(==) :: ListTaskDefinitionFamilies -> ListTaskDefinitionFamilies -> Bool

(/=) :: ListTaskDefinitionFamilies -> ListTaskDefinitionFamilies -> Bool

Data ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> ListTaskDefinitionFamilies -> c ListTaskDefinitionFamilies

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c ListTaskDefinitionFamilies

toConstr :: ListTaskDefinitionFamilies -> Constr

dataTypeOf :: ListTaskDefinitionFamilies -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c ListTaskDefinitionFamilies)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c ListTaskDefinitionFamilies)

gmapT :: (forall b. Data b => b -> b) -> ListTaskDefinitionFamilies -> ListTaskDefinitionFamilies

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> ListTaskDefinitionFamilies -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> ListTaskDefinitionFamilies -> r

gmapQ :: (forall d. Data d => d -> u) -> ListTaskDefinitionFamilies -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> ListTaskDefinitionFamilies -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> ListTaskDefinitionFamilies -> m ListTaskDefinitionFamilies

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> ListTaskDefinitionFamilies -> m ListTaskDefinitionFamilies

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> ListTaskDefinitionFamilies -> m ListTaskDefinitionFamilies

Read ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

readsPrec :: Int -> ReadS ListTaskDefinitionFamilies

readList :: ReadS [ListTaskDefinitionFamilies]

readPrec :: ReadPrec ListTaskDefinitionFamilies

readListPrec :: ReadPrec [ListTaskDefinitionFamilies]

Show ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

showsPrec :: Int -> ListTaskDefinitionFamilies -> ShowS

show :: ListTaskDefinitionFamilies -> String

showList :: [ListTaskDefinitionFamilies] -> ShowS

Generic ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Associated Types

type Rep ListTaskDefinitionFamilies :: Type -> Type

Methods

from :: ListTaskDefinitionFamilies -> Rep ListTaskDefinitionFamilies x

to :: Rep ListTaskDefinitionFamilies x -> ListTaskDefinitionFamilies

Hashable ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

hashWithSalt :: Int -> ListTaskDefinitionFamilies -> Int

hash :: ListTaskDefinitionFamilies -> Int

ToJSON ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

toJSON :: ListTaskDefinitionFamilies -> Value

toEncoding :: ListTaskDefinitionFamilies -> Encoding

toJSONList :: [ListTaskDefinitionFamilies] -> Value

toEncodingList :: [ListTaskDefinitionFamilies] -> Encoding

AWSPager ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

page :: ListTaskDefinitionFamilies -> Rs ListTaskDefinitionFamilies -> Maybe ListTaskDefinitionFamilies

AWSRequest ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Associated Types

type Rs ListTaskDefinitionFamilies :: Type

Methods

request :: ListTaskDefinitionFamilies -> Request ListTaskDefinitionFamilies

response :: (MonadResource m, MonadThrow m) => Logger -> Service -> Proxy ListTaskDefinitionFamilies -> ClientResponse -> m (Response ListTaskDefinitionFamilies)

ToHeaders ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

toHeaders :: ListTaskDefinitionFamilies -> [Header]

ToPath ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

toPath :: ListTaskDefinitionFamilies -> ByteString

ToQuery ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

toQuery :: ListTaskDefinitionFamilies -> QueryString

NFData ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

rnf :: ListTaskDefinitionFamilies -> ()

type Rep ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

type Rep ListTaskDefinitionFamilies = D1 (MetaData "ListTaskDefinitionFamilies" "Network.AWS.ECS.ListTaskDefinitionFamilies" "amazonka-ecs-1.6.1-7o1YH8hMK1ABbFowaTE1Sy" False) (C1 (MetaCons "ListTaskDefinitionFamilies'" PrefixI True) ((S1 (MetaSel (Just "_ltdfStatus") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe TaskDefinitionFamilyStatus)) :*: S1 (MetaSel (Just "_ltdfFamilyPrefix") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 (MetaSel (Just "_ltdfNextToken") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_ltdfMaxResults") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Int)))))

type Rs ListTaskDefinitionFamilies

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

type Rs ListTaskDefinitionFamilies = ListTaskDefinitionFamiliesResponse

Request Lenses

ltdfStatus :: Lens' ListTaskDefinitionFamilies (Maybe TaskDefinitionFamilyStatus)

The task definition family status with which to filter the ListTaskDefinitionFamilies results. By default, both ACTIVE and INACTIVE task definition families are listed. If this parameter is set to ACTIVE , only task definition families that have an ACTIVE task definition revision are returned. If this parameter is set to INACTIVE , only task definition families that do not have any ACTIVE task definition revisions are returned. If you paginate the resulting output, be sure to keep the status value constant in each subsequent request.

ltdfFamilyPrefix :: Lens' ListTaskDefinitionFamilies (Maybe Text)

The familyPrefix is a string that is used to filter the results of ListTaskDefinitionFamilies . If you specify a familyPrefix , only task definition family names that begin with the familyPrefix string are returned.

ltdfNextToken :: Lens' ListTaskDefinitionFamilies (Maybe Text)

The nextToken value returned from a previous paginated ListTaskDefinitionFamilies request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

ltdfMaxResults :: Lens' ListTaskDefinitionFamilies (Maybe Int)

The maximum number of task definition family results returned by ListTaskDefinitionFamilies in paginated output. When this parameter is used, ListTaskDefinitions only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListTaskDefinitionFamilies request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListTaskDefinitionFamilies returns up to 100 results and a nextToken value if applicable.

Destructuring the Response

listTaskDefinitionFamiliesResponse

Arguments

:: Int

ltdfrsResponseStatus

-> ListTaskDefinitionFamiliesResponse

Creates a value of ListTaskDefinitionFamiliesResponse with the minimum fields required to make a request.

Use one of the following lenses to modify other fields as desired:

• ltdfrsFamilies - The list of task definition family names that match the ListTaskDefinitionFamilies request.
• ltdfrsNextToken - The nextToken value to include in a future ListTaskDefinitionFamilies request. When the results of a ListTaskDefinitionFamilies request exceed maxResults , this value can be used to retrieve the next page of results. This value is null when there are no more results to return.
• ltdfrsResponseStatus - -- | The response status code.

data ListTaskDefinitionFamiliesResponse

See: listTaskDefinitionFamiliesResponse smart constructor.

Instances

Eq ListTaskDefinitionFamiliesResponse

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

(==) :: ListTaskDefinitionFamiliesResponse -> ListTaskDefinitionFamiliesResponse -> Bool

(/=) :: ListTaskDefinitionFamiliesResponse -> ListTaskDefinitionFamiliesResponse -> Bool

Data ListTaskDefinitionFamiliesResponse

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> ListTaskDefinitionFamiliesResponse -> c ListTaskDefinitionFamiliesResponse

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c ListTaskDefinitionFamiliesResponse

toConstr :: ListTaskDefinitionFamiliesResponse -> Constr

dataTypeOf :: ListTaskDefinitionFamiliesResponse -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c ListTaskDefinitionFamiliesResponse)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c ListTaskDefinitionFamiliesResponse)

gmapT :: (forall b. Data b => b -> b) -> ListTaskDefinitionFamiliesResponse -> ListTaskDefinitionFamiliesResponse

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> ListTaskDefinitionFamiliesResponse -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> ListTaskDefinitionFamiliesResponse -> r

gmapQ :: (forall d. Data d => d -> u) -> ListTaskDefinitionFamiliesResponse -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> ListTaskDefinitionFamiliesResponse -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> ListTaskDefinitionFamiliesResponse -> m ListTaskDefinitionFamiliesResponse

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> ListTaskDefinitionFamiliesResponse -> m ListTaskDefinitionFamiliesResponse

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> ListTaskDefinitionFamiliesResponse -> m ListTaskDefinitionFamiliesResponse

Read ListTaskDefinitionFamiliesResponse

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

readsPrec :: Int -> ReadS ListTaskDefinitionFamiliesResponse

readList :: ReadS [ListTaskDefinitionFamiliesResponse]

readPrec :: ReadPrec ListTaskDefinitionFamiliesResponse

readListPrec :: ReadPrec [ListTaskDefinitionFamiliesResponse]

Show ListTaskDefinitionFamiliesResponse

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

showsPrec :: Int -> ListTaskDefinitionFamiliesResponse -> ShowS

show :: ListTaskDefinitionFamiliesResponse -> String

showList :: [ListTaskDefinitionFamiliesResponse] -> ShowS

Generic ListTaskDefinitionFamiliesResponse

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Associated Types

type Rep ListTaskDefinitionFamiliesResponse :: Type -> Type

Methods

from :: ListTaskDefinitionFamiliesResponse -> Rep ListTaskDefinitionFamiliesResponse x

to :: Rep ListTaskDefinitionFamiliesResponse x -> ListTaskDefinitionFamiliesResponse

NFData ListTaskDefinitionFamiliesResponse

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

Methods

rnf :: ListTaskDefinitionFamiliesResponse -> ()

type Rep ListTaskDefinitionFamiliesResponse

Defined in Network.AWS.ECS.ListTaskDefinitionFamilies

type Rep ListTaskDefinitionFamiliesResponse = D1 (MetaData "ListTaskDefinitionFamiliesResponse" "Network.AWS.ECS.ListTaskDefinitionFamilies" "amazonka-ecs-1.6.1-7o1YH8hMK1ABbFowaTE1Sy" False) (C1 (MetaCons "ListTaskDefinitionFamiliesResponse'" PrefixI True) (S1 (MetaSel (Just "_ltdfrsFamilies") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe [Text])) :*: (S1 (MetaSel (Just "_ltdfrsNextToken") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 (Maybe Text)) :*: S1 (MetaSel (Just "_ltdfrsResponseStatus") NoSourceUnpackedness SourceStrict DecidedStrict) (Rec0 Int))))

Response Lenses

ltdfrsFamilies :: Lens' ListTaskDefinitionFamiliesResponse [Text]

The list of task definition family names that match the ListTaskDefinitionFamilies request.

ltdfrsNextToken :: Lens' ListTaskDefinitionFamiliesResponse (Maybe Text)

The nextToken value to include in a future ListTaskDefinitionFamilies request. When the results of a ListTaskDefinitionFamilies request exceed maxResults , this value can be used to retrieve the next page of results. This value is null when there are no more results to return.

ltdfrsResponseStatus :: Lens' ListTaskDefinitionFamiliesResponse Int

• - | The response status code.