Amazonka.RDS.ModifyDBCluster

Modify the settings for an Amazon Aurora DB cluster or a Multi-AZ DB cluster. You can change one or more settings by specifying these parameters and the new values in the request.

For more information on Amazon Aurora DB clusters, see What is Amazon Aurora? in the Amazon Aurora User Guide.

For more information on Multi-AZ DB clusters, see Multi-AZ deployments with two readable standby DB instances in the Amazon RDS User Guide.

Creating a Request

data ModifyDBCluster

See: newModifyDBCluster smart constructor.

Constructors

ModifyDBCluster'

Fields

• allocatedStorage :: Maybe Int

  The amount of storage in gibibytes (GiB) to allocate to each DB instance in the Multi-AZ DB cluster.

  Type: Integer

  Valid for: Multi-AZ DB clusters only

• allowMajorVersionUpgrade :: Maybe Bool

  A value that indicates whether major version upgrades are allowed.

  Constraints: You must allow major version upgrades when specifying a value for the EngineVersion parameter that is a different major version than the DB cluster's current version.

  Valid for: Aurora DB clusters only

• applyImmediately :: Maybe Bool

  A value that indicates whether the modifications in this request and any pending modifications are asynchronously applied as soon as possible, regardless of the PreferredMaintenanceWindow setting for the DB cluster. If this parameter is disabled, changes to the DB cluster are applied during the next maintenance window.

  The ApplyImmediately parameter only affects the EnableIAMDatabaseAuthentication, MasterUserPassword, and NewDBClusterIdentifier values. If the ApplyImmediately parameter is disabled, then changes to the EnableIAMDatabaseAuthentication, MasterUserPassword, and NewDBClusterIdentifier values are applied during the next maintenance window. All other changes are applied immediately, regardless of the value of the ApplyImmediately parameter.

  By default, this parameter is disabled.

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• autoMinorVersionUpgrade :: Maybe Bool

  A value that indicates whether minor engine upgrades are applied automatically to the DB cluster during the maintenance window. By default, minor engine upgrades are applied automatically.

  Valid for: Multi-AZ DB clusters only

• backtrackWindow :: Maybe Integer

  The target backtrack window, in seconds. To disable backtracking, set this value to 0.

  Default: 0

  Constraints:

  • If specified, this value must be set to a number from 0 to 259,200 (72 hours).

  Valid for: Aurora MySQL DB clusters only

• backupRetentionPeriod :: Maybe Int

  The number of days for which automated backups are retained. Specify a minimum value of 1.

  Default: 1

  Constraints:

  • Must be a value from 1 to 35

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• cloudwatchLogsExportConfiguration :: Maybe CloudwatchLogsExportConfiguration

  The configuration setting for the log types to be enabled for export to CloudWatch Logs for a specific DB cluster. The values in the list depend on the DB engine being used.

  RDS for MySQL

  Possible values are error, general, and slowquery.

  RDS for PostgreSQL

  Possible values are postgresql and upgrade.

  Aurora MySQL

  Possible values are audit, error, general, and slowquery.

  Aurora PostgreSQL

  Possible value is postgresql.

  For more information about exporting CloudWatch Logs for Amazon RDS, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.

  For more information about exporting CloudWatch Logs for Amazon Aurora, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon Aurora User Guide.

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• copyTagsToSnapshot :: Maybe Bool

  A value that indicates whether to copy all tags from the DB cluster to snapshots of the DB cluster. The default is not to copy them.

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• dbClusterInstanceClass :: Maybe Text

  The compute and memory capacity of each DB instance in the Multi-AZ DB cluster, for example db.m6gd.xlarge. Not all DB instance classes are available in all Amazon Web Services Regions, or for all database engines.

  For the full list of DB instance classes and availability for your engine, see DB Instance Class in the Amazon RDS User Guide.

  Valid for: Multi-AZ DB clusters only

• dbClusterParameterGroupName :: Maybe Text

  The name of the DB cluster parameter group to use for the DB cluster.

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• dbInstanceParameterGroupName :: Maybe Text

  The name of the DB parameter group to apply to all instances of the DB cluster.

  When you apply a parameter group using the DBInstanceParameterGroupName parameter, the DB cluster isn't rebooted automatically. Also, parameter changes are applied immediately rather than during the next maintenance window.

  Default: The existing name setting

  Constraints:

  • The DB parameter group must be in the same DB parameter group family as this DB cluster.
  • The DBInstanceParameterGroupName parameter is valid in combination with the AllowMajorVersionUpgrade parameter for a major version upgrade only.

  Valid for: Aurora DB clusters only

• deletionProtection :: Maybe Bool

  A value that indicates whether the DB cluster has deletion protection enabled. The database can't be deleted when deletion protection is enabled. By default, deletion protection isn't enabled.

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• domain :: Maybe Text

  The Active Directory directory ID to move the DB cluster to. Specify none to remove the cluster from its current domain. The domain must be created prior to this operation.

  For more information, see Kerberos Authentication in the Amazon Aurora User Guide.

  Valid for: Aurora DB clusters only

• domainIAMRoleName :: Maybe Text

  Specify the name of the IAM role to be used when making API calls to the Directory Service.

  Valid for: Aurora DB clusters only

• enableGlobalWriteForwarding :: Maybe Bool

  A value that indicates whether to enable this DB cluster to forward write operations to the primary cluster of an Aurora global database (GlobalCluster). By default, write operations are not allowed on Aurora DB clusters that are secondary clusters in an Aurora global database.

  You can set this value only on Aurora DB clusters that are members of an Aurora global database. With this parameter enabled, a secondary cluster can forward writes to the current primary cluster and the resulting changes are replicated back to this cluster. For the primary DB cluster of an Aurora global database, this value is used immediately if the primary is demoted by the FailoverGlobalCluster API operation, but it does nothing until then.

  Valid for: Aurora DB clusters only

• enableHttpEndpoint :: Maybe Bool

  A value that indicates whether to enable the HTTP endpoint for an Aurora Serverless v1 DB cluster. By default, the HTTP endpoint is disabled.

  When enabled, the HTTP endpoint provides a connectionless web service API for running SQL queries on the Aurora Serverless v1 DB cluster. You can also query your database from inside the RDS console with the query editor.

  For more information, see Using the Data API for Aurora Serverless v1 in the Amazon Aurora User Guide.

  Valid for: Aurora DB clusters only

• enableIAMDatabaseAuthentication :: Maybe Bool

  A value that indicates whether to enable mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts. By default, mapping isn't enabled.

  For more information, see IAM Database Authentication in the Amazon Aurora User Guide.

  Valid for: Aurora DB clusters only

• enablePerformanceInsights :: Maybe Bool

  A value that indicates whether to turn on Performance Insights for the DB cluster.

  For more information, see Using Amazon Performance Insights in the Amazon RDS User Guide.

  Valid for: Multi-AZ DB clusters only

• engineVersion :: Maybe Text

  The version number of the database engine to which you want to upgrade. Changing this parameter results in an outage. The change is applied during the next maintenance window unless ApplyImmediately is enabled.

  To list all of the available engine versions for MySQL 5.6-compatible Aurora, use the following command:

  aws rds describe-db-engine-versions --engine aurora --query "DBEngineVersions[].EngineVersion"

  To list all of the available engine versions for MySQL 5.7-compatible and MySQL 8.0-compatible Aurora, use the following command:

  aws rds describe-db-engine-versions --engine aurora-mysql --query "DBEngineVersions[].EngineVersion"

  To list all of the available engine versions for Aurora PostgreSQL, use the following command:

  aws rds describe-db-engine-versions --engine aurora-postgresql --query "DBEngineVersions[].EngineVersion"

  To list all of the available engine versions for RDS for MySQL, use the following command:

  aws rds describe-db-engine-versions --engine mysql --query "DBEngineVersions[].EngineVersion"

  To list all of the available engine versions for RDS for PostgreSQL, use the following command:

  aws rds describe-db-engine-versions --engine postgres --query "DBEngineVersions[].EngineVersion"

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• iops :: Maybe Int

  The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for each DB instance in the Multi-AZ DB cluster.

  For information about valid IOPS values, see Amazon RDS Provisioned IOPS storage in the Amazon RDS User Guide.

  Constraints: Must be a multiple between .5 and 50 of the storage amount for the DB cluster.

  Valid for: Multi-AZ DB clusters only

• manageMasterUserPassword :: Maybe Bool

  A value that indicates whether to manage the master user password with Amazon Web Services Secrets Manager.

  If the DB cluster doesn't manage the master user password with Amazon Web Services Secrets Manager, you can turn on this management. In this case, you can't specify MasterUserPassword.

  If the DB cluster already manages the master user password with Amazon Web Services Secrets Manager, and you specify that the master user password is not managed with Amazon Web Services Secrets Manager, then you must specify MasterUserPassword. In this case, RDS deletes the secret and uses the new password for the master user specified by MasterUserPassword.

  For more information, see Password management with Amazon Web Services Secrets Manager in the Amazon RDS User Guide and Password management with Amazon Web Services Secrets Manager in the Amazon Aurora User Guide.

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• masterUserPassword :: Maybe Text

  The new password for the master database user. This password can contain any printable ASCII character except "/", """, or "@".

  Constraints:

  • Must contain from 8 to 41 characters.
  • Can't be specified if ManageMasterUserPassword is turned on.

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• masterUserSecretKmsKeyId :: Maybe Text

  The Amazon Web Services KMS key identifier to encrypt a secret that is automatically generated and managed in Amazon Web Services Secrets Manager.

  This setting is valid only if both of the following conditions are met:

  • The DB cluster doesn't manage the master user password in Amazon Web Services Secrets Manager.

    If the DB cluster already manages the master user password in Amazon Web Services Secrets Manager, you can't change the KMS key that is used to encrypt the secret.

  • You are turning on ManageMasterUserPassword to manage the master user password in Amazon Web Services Secrets Manager.

    If you are turning on ManageMasterUserPassword and don't specify MasterUserSecretKmsKeyId, then the aws/secretsmanager KMS key is used to encrypt the secret. If the secret is in a different Amazon Web Services account, then you can't use the aws/secretsmanager KMS key to encrypt the secret, and you must use a customer managed KMS key.

  The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key. To use a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN.

  There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• monitoringInterval :: Maybe Int

  The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB cluster. To turn off collecting Enhanced Monitoring metrics, specify 0. The default is 0.

  If MonitoringRoleArn is specified, also set MonitoringInterval to a value other than 0.

  Valid Values: 0, 1, 5, 10, 15, 30, 60

  Valid for: Multi-AZ DB clusters only

• monitoringRoleArn :: Maybe Text

  The Amazon Resource Name (ARN) for the IAM role that permits RDS to send Enhanced Monitoring metrics to Amazon CloudWatch Logs. An example is arn:aws:iam:123456789012:role/emaccess. For information on creating a monitoring role, see To create an IAM role for Amazon RDS Enhanced Monitoring in the Amazon RDS User Guide.

  If MonitoringInterval is set to a value other than 0, supply a MonitoringRoleArn value.

  Valid for: Multi-AZ DB clusters only

• networkType :: Maybe Text

  The network type of the DB cluster.

  Valid values:

  • IPV4

  • DUAL

  The network type is determined by the DBSubnetGroup specified for the DB cluster. A DBSubnetGroup can support only the IPv4 protocol or the IPv4 and the IPv6 protocols (DUAL).

  For more information, see Working with a DB instance in a VPC in the Amazon Aurora User Guide.

  Valid for: Aurora DB clusters only

• newDBClusterIdentifier' :: Maybe Text

  The new DB cluster identifier for the DB cluster when renaming a DB cluster. This value is stored as a lowercase string.

  Constraints:

  • Must contain from 1 to 63 letters, numbers, or hyphens
  • The first character must be a letter
  • Can't end with a hyphen or contain two consecutive hyphens

  Example: my-cluster2

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• optionGroupName :: Maybe Text

  A value that indicates that the DB cluster should be associated with the specified option group.

  DB clusters are associated with a default option group that can't be modified.

• performanceInsightsKMSKeyId :: Maybe Text

  The Amazon Web Services KMS key identifier for encryption of Performance Insights data.

  The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.

  If you don't specify a value for PerformanceInsightsKMSKeyId, then Amazon RDS uses your default KMS key. There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.

  Valid for: Multi-AZ DB clusters only

• performanceInsightsRetentionPeriod :: Maybe Int

  The number of days to retain Performance Insights data. The default is 7 days. The following values are valid:

  • 7
  • month * 31, where month is a number of months from 1-23
  • 731

  For example, the following values are valid:

  • 93 (3 months * 31)
  • 341 (11 months * 31)
  • 589 (19 months * 31)
  • 731

  If you specify a retention period such as 94, which isn't a valid value, RDS issues an error.

  Valid for: Multi-AZ DB clusters only

• port :: Maybe Int

  The port number on which the DB cluster accepts connections.

  Constraints: Value must be 1150-65535

  Default: The same port as the original DB cluster.

  Valid for: Aurora DB clusters only

• preferredBackupWindow :: Maybe Text

  The daily time range during which automated backups are created if automated backups are enabled, using the BackupRetentionPeriod parameter.

  The default is a 30-minute window selected at random from an 8-hour block of time for each Amazon Web Services Region. To view the time blocks available, see Backup window in the Amazon Aurora User Guide.

  Constraints:

  • Must be in the format hh24:mi-hh24:mi.
  • Must be in Universal Coordinated Time (UTC).
  • Must not conflict with the preferred maintenance window.
  • Must be at least 30 minutes.

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• preferredMaintenanceWindow :: Maybe Text

  The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).

  Format: ddd:hh24:mi-ddd:hh24:mi

  The default is a 30-minute window selected at random from an 8-hour block of time for each Amazon Web Services Region, occurring on a random day of the week. To see the time blocks available, see Adjusting the Preferred DB Cluster Maintenance Window in the Amazon Aurora User Guide.

  Valid Days: Mon, Tue, Wed, Thu, Fri, Sat, Sun.

  Constraints: Minimum 30-minute window.

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• rotateMasterUserPassword :: Maybe Bool

  A value that indicates whether to rotate the secret managed by Amazon Web Services Secrets Manager for the master user password.

  This setting is valid only if the master user password is managed by RDS in Amazon Web Services Secrets Manager for the DB cluster. The secret value contains the updated password.

  For more information, see Password management with Amazon Web Services Secrets Manager in the Amazon RDS User Guide and Password management with Amazon Web Services Secrets Manager in the Amazon Aurora User Guide.

  Constraints:

  • You must apply the change immediately when rotating the master user password.

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• scalingConfiguration :: Maybe ScalingConfiguration

  The scaling properties of the DB cluster. You can only modify scaling properties for DB clusters in serverless DB engine mode.

  Valid for: Aurora DB clusters only

• serverlessV2ScalingConfiguration :: Maybe ServerlessV2ScalingConfiguration
• storageType :: Maybe Text

  Specifies the storage type to be associated with the DB cluster.

  Valid values: io1

  When specified, a value for the Iops parameter is required.

  Default: io1

  Valid for: Multi-AZ DB clusters only

• vpcSecurityGroupIds :: Maybe [Text]

  A list of VPC security groups that the DB cluster will belong to.

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

• dbClusterIdentifier :: Text

  The DB cluster identifier for the cluster being modified. This parameter isn't case-sensitive.

  Constraints: This identifier must match the identifier of an existing DB cluster.

  Valid for: Aurora DB clusters and Multi-AZ DB clusters

Instances

ToHeaders ModifyDBCluster

Defined in Amazonka.RDS.ModifyDBCluster

Methods

toHeaders :: ModifyDBCluster -> [Header]

ToPath ModifyDBCluster

Defined in Amazonka.RDS.ModifyDBCluster

Methods

toPath :: ModifyDBCluster -> ByteString

ToQuery ModifyDBCluster

Defined in Amazonka.RDS.ModifyDBCluster

Methods

toQuery :: ModifyDBCluster -> QueryString

AWSRequest ModifyDBCluster

Defined in Amazonka.RDS.ModifyDBCluster

Associated Types

type AWSResponse ModifyDBCluster

Methods

request :: (Service -> Service) -> ModifyDBCluster -> Request ModifyDBCluster

response :: MonadResource m => (ByteStringLazy -> IO ByteStringLazy) -> Service -> Proxy ModifyDBCluster -> ClientResponse ClientBody -> m (Either Error (ClientResponse (AWSResponse ModifyDBCluster)))

Generic ModifyDBCluster

Defined in Amazonka.RDS.ModifyDBCluster

Associated Types

type Rep ModifyDBCluster :: Type -> Type

Methods

from :: ModifyDBCluster -> Rep ModifyDBCluster x

to :: Rep ModifyDBCluster x -> ModifyDBCluster

Read ModifyDBCluster

Defined in Amazonka.RDS.ModifyDBCluster

Methods

readsPrec :: Int -> ReadS ModifyDBCluster

readList :: ReadS [ModifyDBCluster]

readPrec :: ReadPrec ModifyDBCluster

readListPrec :: ReadPrec [ModifyDBCluster]

Show ModifyDBCluster

Defined in Amazonka.RDS.ModifyDBCluster

Methods

showsPrec :: Int -> ModifyDBCluster -> ShowS

show :: ModifyDBCluster -> String

showList :: [ModifyDBCluster] -> ShowS

NFData ModifyDBCluster

Defined in Amazonka.RDS.ModifyDBCluster

Methods

rnf :: ModifyDBCluster -> ()

Eq ModifyDBCluster

Defined in Amazonka.RDS.ModifyDBCluster

Methods

(==) :: ModifyDBCluster -> ModifyDBCluster -> Bool

(/=) :: ModifyDBCluster -> ModifyDBCluster -> Bool

Hashable ModifyDBCluster

Defined in Amazonka.RDS.ModifyDBCluster

Methods

hashWithSalt :: Int -> ModifyDBCluster -> Int

hash :: ModifyDBCluster -> Int

type AWSResponse ModifyDBCluster

Defined in Amazonka.RDS.ModifyDBCluster

type AWSResponse ModifyDBCluster = ModifyDBClusterResponse

type Rep ModifyDBCluster

Defined in Amazonka.RDS.ModifyDBCluster

type Rep ModifyDBCluster = D1 ('MetaData "ModifyDBCluster" "Amazonka.RDS.ModifyDBCluster" "amazonka-rds-2.0-3xXyiLHmAvvCXXUIx1uhpP" 'False) (C1 ('MetaCons "ModifyDBCluster'" 'PrefixI 'True) (((((S1 ('MetaSel ('Just "allocatedStorage") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)) :*: S1 ('MetaSel ('Just "allowMajorVersionUpgrade") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool))) :*: (S1 ('MetaSel ('Just "applyImmediately") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: S1 ('MetaSel ('Just "autoMinorVersionUpgrade") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)))) :*: ((S1 ('MetaSel ('Just "backtrackWindow") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Integer)) :*: S1 ('MetaSel ('Just "backupRetentionPeriod") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int))) :*: (S1 ('MetaSel ('Just "cloudwatchLogsExportConfiguration") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe CloudwatchLogsExportConfiguration)) :*: (S1 ('MetaSel ('Just "copyTagsToSnapshot") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: S1 ('MetaSel ('Just "dbClusterInstanceClass") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))))) :*: (((S1 ('MetaSel ('Just "dbClusterParameterGroupName") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "dbInstanceParameterGroupName") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "deletionProtection") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: (S1 ('MetaSel ('Just "domain") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "domainIAMRoleName") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))) :*: ((S1 ('MetaSel ('Just "enableGlobalWriteForwarding") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: S1 ('MetaSel ('Just "enableHttpEndpoint") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool))) :*: (S1 ('MetaSel ('Just "enableIAMDatabaseAuthentication") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: (S1 ('MetaSel ('Just "enablePerformanceInsights") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: S1 ('MetaSel ('Just "engineVersion") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))))) :*: ((((S1 ('MetaSel ('Just "iops") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)) :*: S1 ('MetaSel ('Just "manageMasterUserPassword") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool))) :*: (S1 ('MetaSel ('Just "masterUserPassword") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "masterUserSecretKmsKeyId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "monitoringInterval") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int))))) :*: ((S1 ('MetaSel ('Just "monitoringRoleArn") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "networkType") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "newDBClusterIdentifier'") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "optionGroupName") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "performanceInsightsKMSKeyId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))))) :*: (((S1 ('MetaSel ('Just "performanceInsightsRetentionPeriod") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)) :*: S1 ('MetaSel ('Just "port") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int))) :*: (S1 ('MetaSel ('Just "preferredBackupWindow") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "preferredMaintenanceWindow") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "rotateMasterUserPassword") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool))))) :*: ((S1 ('MetaSel ('Just "scalingConfiguration") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe ScalingConfiguration)) :*: S1 ('MetaSel ('Just "serverlessV2ScalingConfiguration") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe ServerlessV2ScalingConfiguration))) :*: (S1 ('MetaSel ('Just "storageType") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "vpcSecurityGroupIds") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text])) :*: S1 ('MetaSel ('Just "dbClusterIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Text))))))))

newModifyDBCluster

Arguments

:: Text

ModifyDBCluster

-> ModifyDBCluster

Create a value of ModifyDBCluster with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

ModifyDBCluster, modifyDBCluster_allocatedStorage - The amount of storage in gibibytes (GiB) to allocate to each DB instance in the Multi-AZ DB cluster.

Type: Integer

Valid for: Multi-AZ DB clusters only

$sel:allowMajorVersionUpgrade:ModifyDBCluster', modifyDBCluster_allowMajorVersionUpgrade - A value that indicates whether major version upgrades are allowed.

Constraints: You must allow major version upgrades when specifying a value for the EngineVersion parameter that is a different major version than the DB cluster's current version.

Valid for: Aurora DB clusters only

$sel:applyImmediately:ModifyDBCluster', modifyDBCluster_applyImmediately - A value that indicates whether the modifications in this request and any pending modifications are asynchronously applied as soon as possible, regardless of the PreferredMaintenanceWindow setting for the DB cluster. If this parameter is disabled, changes to the DB cluster are applied during the next maintenance window.

The ApplyImmediately parameter only affects the EnableIAMDatabaseAuthentication, MasterUserPassword, and NewDBClusterIdentifier values. If the ApplyImmediately parameter is disabled, then changes to the EnableIAMDatabaseAuthentication, MasterUserPassword, and NewDBClusterIdentifier values are applied during the next maintenance window. All other changes are applied immediately, regardless of the value of the ApplyImmediately parameter.

By default, this parameter is disabled.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

ModifyDBCluster, modifyDBCluster_autoMinorVersionUpgrade - A value that indicates whether minor engine upgrades are applied automatically to the DB cluster during the maintenance window. By default, minor engine upgrades are applied automatically.

Valid for: Multi-AZ DB clusters only

ModifyDBCluster, modifyDBCluster_backtrackWindow - The target backtrack window, in seconds. To disable backtracking, set this value to 0.

Default: 0

Constraints:

• If specified, this value must be set to a number from 0 to 259,200 (72 hours).

Valid for: Aurora MySQL DB clusters only

ModifyDBCluster, modifyDBCluster_backupRetentionPeriod - The number of days for which automated backups are retained. Specify a minimum value of 1.

Default: 1

Constraints:

• Must be a value from 1 to 35

Valid for: Aurora DB clusters and Multi-AZ DB clusters

$sel:cloudwatchLogsExportConfiguration:ModifyDBCluster', modifyDBCluster_cloudwatchLogsExportConfiguration - The configuration setting for the log types to be enabled for export to CloudWatch Logs for a specific DB cluster. The values in the list depend on the DB engine being used.

RDS for MySQL

Possible values are error, general, and slowquery.

RDS for PostgreSQL

Possible values are postgresql and upgrade.

Aurora MySQL

Possible values are audit, error, general, and slowquery.

Aurora PostgreSQL

Possible value is postgresql.

For more information about exporting CloudWatch Logs for Amazon RDS, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.

For more information about exporting CloudWatch Logs for Amazon Aurora, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon Aurora User Guide.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

ModifyDBCluster, modifyDBCluster_copyTagsToSnapshot - A value that indicates whether to copy all tags from the DB cluster to snapshots of the DB cluster. The default is not to copy them.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

ModifyDBCluster, modifyDBCluster_dbClusterInstanceClass - The compute and memory capacity of each DB instance in the Multi-AZ DB cluster, for example db.m6gd.xlarge. Not all DB instance classes are available in all Amazon Web Services Regions, or for all database engines.

For the full list of DB instance classes and availability for your engine, see DB Instance Class in the Amazon RDS User Guide.

Valid for: Multi-AZ DB clusters only

ModifyDBCluster, modifyDBCluster_dbClusterParameterGroupName - The name of the DB cluster parameter group to use for the DB cluster.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

$sel:dbInstanceParameterGroupName:ModifyDBCluster', modifyDBCluster_dbInstanceParameterGroupName - The name of the DB parameter group to apply to all instances of the DB cluster.

When you apply a parameter group using the DBInstanceParameterGroupName parameter, the DB cluster isn't rebooted automatically. Also, parameter changes are applied immediately rather than during the next maintenance window.

Default: The existing name setting

Constraints:

• The DB parameter group must be in the same DB parameter group family as this DB cluster.
• The DBInstanceParameterGroupName parameter is valid in combination with the AllowMajorVersionUpgrade parameter for a major version upgrade only.

Valid for: Aurora DB clusters only

ModifyDBCluster, modifyDBCluster_deletionProtection - A value that indicates whether the DB cluster has deletion protection enabled. The database can't be deleted when deletion protection is enabled. By default, deletion protection isn't enabled.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

ModifyDBCluster, modifyDBCluster_domain - The Active Directory directory ID to move the DB cluster to. Specify none to remove the cluster from its current domain. The domain must be created prior to this operation.

For more information, see Kerberos Authentication in the Amazon Aurora User Guide.

Valid for: Aurora DB clusters only

$sel:domainIAMRoleName:ModifyDBCluster', modifyDBCluster_domainIAMRoleName - Specify the name of the IAM role to be used when making API calls to the Directory Service.

Valid for: Aurora DB clusters only

$sel:enableGlobalWriteForwarding:ModifyDBCluster', modifyDBCluster_enableGlobalWriteForwarding - A value that indicates whether to enable this DB cluster to forward write operations to the primary cluster of an Aurora global database (GlobalCluster). By default, write operations are not allowed on Aurora DB clusters that are secondary clusters in an Aurora global database.

You can set this value only on Aurora DB clusters that are members of an Aurora global database. With this parameter enabled, a secondary cluster can forward writes to the current primary cluster and the resulting changes are replicated back to this cluster. For the primary DB cluster of an Aurora global database, this value is used immediately if the primary is demoted by the FailoverGlobalCluster API operation, but it does nothing until then.

Valid for: Aurora DB clusters only

$sel:enableHttpEndpoint:ModifyDBCluster', modifyDBCluster_enableHttpEndpoint - A value that indicates whether to enable the HTTP endpoint for an Aurora Serverless v1 DB cluster. By default, the HTTP endpoint is disabled.

When enabled, the HTTP endpoint provides a connectionless web service API for running SQL queries on the Aurora Serverless v1 DB cluster. You can also query your database from inside the RDS console with the query editor.

For more information, see Using the Data API for Aurora Serverless v1 in the Amazon Aurora User Guide.

Valid for: Aurora DB clusters only

$sel:enableIAMDatabaseAuthentication:ModifyDBCluster', modifyDBCluster_enableIAMDatabaseAuthentication - A value that indicates whether to enable mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts. By default, mapping isn't enabled.

For more information, see IAM Database Authentication in the Amazon Aurora User Guide.

Valid for: Aurora DB clusters only

$sel:enablePerformanceInsights:ModifyDBCluster', modifyDBCluster_enablePerformanceInsights - A value that indicates whether to turn on Performance Insights for the DB cluster.

For more information, see Using Amazon Performance Insights in the Amazon RDS User Guide.

Valid for: Multi-AZ DB clusters only

ModifyDBCluster, modifyDBCluster_engineVersion - The version number of the database engine to which you want to upgrade. Changing this parameter results in an outage. The change is applied during the next maintenance window unless ApplyImmediately is enabled.

To list all of the available engine versions for MySQL 5.6-compatible Aurora, use the following command:

aws rds describe-db-engine-versions --engine aurora --query "DBEngineVersions[].EngineVersion"

To list all of the available engine versions for MySQL 5.7-compatible and MySQL 8.0-compatible Aurora, use the following command:

aws rds describe-db-engine-versions --engine aurora-mysql --query "DBEngineVersions[].EngineVersion"

To list all of the available engine versions for Aurora PostgreSQL, use the following command:

aws rds describe-db-engine-versions --engine aurora-postgresql --query "DBEngineVersions[].EngineVersion"

To list all of the available engine versions for RDS for MySQL, use the following command:

aws rds describe-db-engine-versions --engine mysql --query "DBEngineVersions[].EngineVersion"

To list all of the available engine versions for RDS for PostgreSQL, use the following command:

aws rds describe-db-engine-versions --engine postgres --query "DBEngineVersions[].EngineVersion"

Valid for: Aurora DB clusters and Multi-AZ DB clusters

ModifyDBCluster, modifyDBCluster_iops - The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for each DB instance in the Multi-AZ DB cluster.

For information about valid IOPS values, see Amazon RDS Provisioned IOPS storage in the Amazon RDS User Guide.

Constraints: Must be a multiple between .5 and 50 of the storage amount for the DB cluster.

Valid for: Multi-AZ DB clusters only

$sel:manageMasterUserPassword:ModifyDBCluster', modifyDBCluster_manageMasterUserPassword - A value that indicates whether to manage the master user password with Amazon Web Services Secrets Manager.

If the DB cluster doesn't manage the master user password with Amazon Web Services Secrets Manager, you can turn on this management. In this case, you can't specify MasterUserPassword.

If the DB cluster already manages the master user password with Amazon Web Services Secrets Manager, and you specify that the master user password is not managed with Amazon Web Services Secrets Manager, then you must specify MasterUserPassword. In this case, RDS deletes the secret and uses the new password for the master user specified by MasterUserPassword.

For more information, see Password management with Amazon Web Services Secrets Manager in the Amazon RDS User Guide and Password management with Amazon Web Services Secrets Manager in the Amazon Aurora User Guide.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

ModifyDBCluster, modifyDBCluster_masterUserPassword - The new password for the master database user. This password can contain any printable ASCII character except "/", """, or "@".

Constraints:

• Must contain from 8 to 41 characters.
• Can't be specified if ManageMasterUserPassword is turned on.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

$sel:masterUserSecretKmsKeyId:ModifyDBCluster', modifyDBCluster_masterUserSecretKmsKeyId - The Amazon Web Services KMS key identifier to encrypt a secret that is automatically generated and managed in Amazon Web Services Secrets Manager.

This setting is valid only if both of the following conditions are met:

• The DB cluster doesn't manage the master user password in Amazon Web Services Secrets Manager.

  If the DB cluster already manages the master user password in Amazon Web Services Secrets Manager, you can't change the KMS key that is used to encrypt the secret.

• You are turning on ManageMasterUserPassword to manage the master user password in Amazon Web Services Secrets Manager.

  If you are turning on ManageMasterUserPassword and don't specify MasterUserSecretKmsKeyId, then the aws/secretsmanager KMS key is used to encrypt the secret. If the secret is in a different Amazon Web Services account, then you can't use the aws/secretsmanager KMS key to encrypt the secret, and you must use a customer managed KMS key.

The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key. To use a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN.

There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

ModifyDBCluster, modifyDBCluster_monitoringInterval - The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB cluster. To turn off collecting Enhanced Monitoring metrics, specify 0. The default is 0.

If MonitoringRoleArn is specified, also set MonitoringInterval to a value other than 0.

Valid Values: 0, 1, 5, 10, 15, 30, 60

Valid for: Multi-AZ DB clusters only

ModifyDBCluster, modifyDBCluster_monitoringRoleArn - The Amazon Resource Name (ARN) for the IAM role that permits RDS to send Enhanced Monitoring metrics to Amazon CloudWatch Logs. An example is arn:aws:iam:123456789012:role/emaccess. For information on creating a monitoring role, see To create an IAM role for Amazon RDS Enhanced Monitoring in the Amazon RDS User Guide.

If MonitoringInterval is set to a value other than 0, supply a MonitoringRoleArn value.

Valid for: Multi-AZ DB clusters only

ModifyDBCluster, modifyDBCluster_networkType - The network type of the DB cluster.

Valid values:

• IPV4

• DUAL

The network type is determined by the DBSubnetGroup specified for the DB cluster. A DBSubnetGroup can support only the IPv4 protocol or the IPv4 and the IPv6 protocols (DUAL).

For more information, see Working with a DB instance in a VPC in the Amazon Aurora User Guide.

Valid for: Aurora DB clusters only

$sel:newDBClusterIdentifier':ModifyDBCluster', modifyDBCluster_newDBClusterIdentifier - The new DB cluster identifier for the DB cluster when renaming a DB cluster. This value is stored as a lowercase string.

Constraints:

• Must contain from 1 to 63 letters, numbers, or hyphens
• The first character must be a letter
• Can't end with a hyphen or contain two consecutive hyphens

Example: my-cluster2

Valid for: Aurora DB clusters and Multi-AZ DB clusters

ModifyDBCluster, modifyDBCluster_optionGroupName - A value that indicates that the DB cluster should be associated with the specified option group.

DB clusters are associated with a default option group that can't be modified.

ModifyDBCluster, modifyDBCluster_performanceInsightsKMSKeyId - The Amazon Web Services KMS key identifier for encryption of Performance Insights data.

The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.

If you don't specify a value for PerformanceInsightsKMSKeyId, then Amazon RDS uses your default KMS key. There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.

Valid for: Multi-AZ DB clusters only

ModifyDBCluster, modifyDBCluster_performanceInsightsRetentionPeriod - The number of days to retain Performance Insights data. The default is 7 days. The following values are valid:

• 7
• month * 31, where month is a number of months from 1-23
• 731

For example, the following values are valid:

• 93 (3 months * 31)
• 341 (11 months * 31)
• 589 (19 months * 31)
• 731

If you specify a retention period such as 94, which isn't a valid value, RDS issues an error.

Valid for: Multi-AZ DB clusters only

ModifyDBCluster, modifyDBCluster_port - The port number on which the DB cluster accepts connections.

Constraints: Value must be 1150-65535

Default: The same port as the original DB cluster.

Valid for: Aurora DB clusters only

ModifyDBCluster, modifyDBCluster_preferredBackupWindow - The daily time range during which automated backups are created if automated backups are enabled, using the BackupRetentionPeriod parameter.

The default is a 30-minute window selected at random from an 8-hour block of time for each Amazon Web Services Region. To view the time blocks available, see Backup window in the Amazon Aurora User Guide.

Constraints:

• Must be in the format hh24:mi-hh24:mi.
• Must be in Universal Coordinated Time (UTC).
• Must not conflict with the preferred maintenance window.
• Must be at least 30 minutes.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

ModifyDBCluster, modifyDBCluster_preferredMaintenanceWindow - The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).

Format: ddd:hh24:mi-ddd:hh24:mi

The default is a 30-minute window selected at random from an 8-hour block of time for each Amazon Web Services Region, occurring on a random day of the week. To see the time blocks available, see Adjusting the Preferred DB Cluster Maintenance Window in the Amazon Aurora User Guide.

Valid Days: Mon, Tue, Wed, Thu, Fri, Sat, Sun.

Constraints: Minimum 30-minute window.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

$sel:rotateMasterUserPassword:ModifyDBCluster', modifyDBCluster_rotateMasterUserPassword - A value that indicates whether to rotate the secret managed by Amazon Web Services Secrets Manager for the master user password.

This setting is valid only if the master user password is managed by RDS in Amazon Web Services Secrets Manager for the DB cluster. The secret value contains the updated password.

For more information, see Password management with Amazon Web Services Secrets Manager in the Amazon RDS User Guide and Password management with Amazon Web Services Secrets Manager in the Amazon Aurora User Guide.

Constraints:

• You must apply the change immediately when rotating the master user password.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

$sel:scalingConfiguration:ModifyDBCluster', modifyDBCluster_scalingConfiguration - The scaling properties of the DB cluster. You can only modify scaling properties for DB clusters in serverless DB engine mode.

Valid for: Aurora DB clusters only

ModifyDBCluster, modifyDBCluster_serverlessV2ScalingConfiguration - Undocumented member.

ModifyDBCluster, modifyDBCluster_storageType - Specifies the storage type to be associated with the DB cluster.

Valid values: io1

When specified, a value for the Iops parameter is required.

Default: io1

Valid for: Multi-AZ DB clusters only

ModifyDBCluster, modifyDBCluster_vpcSecurityGroupIds - A list of VPC security groups that the DB cluster will belong to.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

ModifyDBCluster, modifyDBCluster_dbClusterIdentifier - The DB cluster identifier for the cluster being modified. This parameter isn't case-sensitive.

Constraints: This identifier must match the identifier of an existing DB cluster.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

Request Lenses

modifyDBCluster_allocatedStorage :: Lens' ModifyDBCluster (Maybe Int)

The amount of storage in gibibytes (GiB) to allocate to each DB instance in the Multi-AZ DB cluster.

Type: Integer

Valid for: Multi-AZ DB clusters only

modifyDBCluster_allowMajorVersionUpgrade :: Lens' ModifyDBCluster (Maybe Bool)

A value that indicates whether major version upgrades are allowed.

Constraints: You must allow major version upgrades when specifying a value for the EngineVersion parameter that is a different major version than the DB cluster's current version.

Valid for: Aurora DB clusters only

modifyDBCluster_applyImmediately :: Lens' ModifyDBCluster (Maybe Bool)

A value that indicates whether the modifications in this request and any pending modifications are asynchronously applied as soon as possible, regardless of the PreferredMaintenanceWindow setting for the DB cluster. If this parameter is disabled, changes to the DB cluster are applied during the next maintenance window.

The ApplyImmediately parameter only affects the EnableIAMDatabaseAuthentication, MasterUserPassword, and NewDBClusterIdentifier values. If the ApplyImmediately parameter is disabled, then changes to the EnableIAMDatabaseAuthentication, MasterUserPassword, and NewDBClusterIdentifier values are applied during the next maintenance window. All other changes are applied immediately, regardless of the value of the ApplyImmediately parameter.

By default, this parameter is disabled.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_autoMinorVersionUpgrade :: Lens' ModifyDBCluster (Maybe Bool)

A value that indicates whether minor engine upgrades are applied automatically to the DB cluster during the maintenance window. By default, minor engine upgrades are applied automatically.

Valid for: Multi-AZ DB clusters only

modifyDBCluster_backtrackWindow :: Lens' ModifyDBCluster (Maybe Integer)

The target backtrack window, in seconds. To disable backtracking, set this value to 0.

Default: 0

Constraints:

• If specified, this value must be set to a number from 0 to 259,200 (72 hours).

Valid for: Aurora MySQL DB clusters only

modifyDBCluster_backupRetentionPeriod :: Lens' ModifyDBCluster (Maybe Int)

The number of days for which automated backups are retained. Specify a minimum value of 1.

Default: 1

Constraints:

• Must be a value from 1 to 35

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_cloudwatchLogsExportConfiguration :: Lens' ModifyDBCluster (Maybe CloudwatchLogsExportConfiguration)

The configuration setting for the log types to be enabled for export to CloudWatch Logs for a specific DB cluster. The values in the list depend on the DB engine being used.

RDS for MySQL

Possible values are error, general, and slowquery.

RDS for PostgreSQL

Possible values are postgresql and upgrade.

Aurora MySQL

Possible values are audit, error, general, and slowquery.

Aurora PostgreSQL

Possible value is postgresql.

For more information about exporting CloudWatch Logs for Amazon RDS, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.

For more information about exporting CloudWatch Logs for Amazon Aurora, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon Aurora User Guide.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_copyTagsToSnapshot :: Lens' ModifyDBCluster (Maybe Bool)

A value that indicates whether to copy all tags from the DB cluster to snapshots of the DB cluster. The default is not to copy them.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_dbClusterInstanceClass :: Lens' ModifyDBCluster (Maybe Text)

The compute and memory capacity of each DB instance in the Multi-AZ DB cluster, for example db.m6gd.xlarge. Not all DB instance classes are available in all Amazon Web Services Regions, or for all database engines.

For the full list of DB instance classes and availability for your engine, see DB Instance Class in the Amazon RDS User Guide.

Valid for: Multi-AZ DB clusters only

modifyDBCluster_dbClusterParameterGroupName :: Lens' ModifyDBCluster (Maybe Text)

The name of the DB cluster parameter group to use for the DB cluster.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_dbInstanceParameterGroupName :: Lens' ModifyDBCluster (Maybe Text)

The name of the DB parameter group to apply to all instances of the DB cluster.

When you apply a parameter group using the DBInstanceParameterGroupName parameter, the DB cluster isn't rebooted automatically. Also, parameter changes are applied immediately rather than during the next maintenance window.

Default: The existing name setting

Constraints:

• The DB parameter group must be in the same DB parameter group family as this DB cluster.
• The DBInstanceParameterGroupName parameter is valid in combination with the AllowMajorVersionUpgrade parameter for a major version upgrade only.

Valid for: Aurora DB clusters only

modifyDBCluster_deletionProtection :: Lens' ModifyDBCluster (Maybe Bool)

A value that indicates whether the DB cluster has deletion protection enabled. The database can't be deleted when deletion protection is enabled. By default, deletion protection isn't enabled.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_domain :: Lens' ModifyDBCluster (Maybe Text)

The Active Directory directory ID to move the DB cluster to. Specify none to remove the cluster from its current domain. The domain must be created prior to this operation.

For more information, see Kerberos Authentication in the Amazon Aurora User Guide.

Valid for: Aurora DB clusters only

modifyDBCluster_domainIAMRoleName :: Lens' ModifyDBCluster (Maybe Text)

Specify the name of the IAM role to be used when making API calls to the Directory Service.

Valid for: Aurora DB clusters only

modifyDBCluster_enableGlobalWriteForwarding :: Lens' ModifyDBCluster (Maybe Bool)

A value that indicates whether to enable this DB cluster to forward write operations to the primary cluster of an Aurora global database (GlobalCluster). By default, write operations are not allowed on Aurora DB clusters that are secondary clusters in an Aurora global database.

You can set this value only on Aurora DB clusters that are members of an Aurora global database. With this parameter enabled, a secondary cluster can forward writes to the current primary cluster and the resulting changes are replicated back to this cluster. For the primary DB cluster of an Aurora global database, this value is used immediately if the primary is demoted by the FailoverGlobalCluster API operation, but it does nothing until then.

Valid for: Aurora DB clusters only

modifyDBCluster_enableHttpEndpoint :: Lens' ModifyDBCluster (Maybe Bool)

A value that indicates whether to enable the HTTP endpoint for an Aurora Serverless v1 DB cluster. By default, the HTTP endpoint is disabled.

When enabled, the HTTP endpoint provides a connectionless web service API for running SQL queries on the Aurora Serverless v1 DB cluster. You can also query your database from inside the RDS console with the query editor.

For more information, see Using the Data API for Aurora Serverless v1 in the Amazon Aurora User Guide.

Valid for: Aurora DB clusters only

modifyDBCluster_enableIAMDatabaseAuthentication :: Lens' ModifyDBCluster (Maybe Bool)

A value that indicates whether to enable mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts. By default, mapping isn't enabled.

For more information, see IAM Database Authentication in the Amazon Aurora User Guide.

Valid for: Aurora DB clusters only

modifyDBCluster_enablePerformanceInsights :: Lens' ModifyDBCluster (Maybe Bool)

A value that indicates whether to turn on Performance Insights for the DB cluster.

For more information, see Using Amazon Performance Insights in the Amazon RDS User Guide.

Valid for: Multi-AZ DB clusters only

modifyDBCluster_engineVersion :: Lens' ModifyDBCluster (Maybe Text)

The version number of the database engine to which you want to upgrade. Changing this parameter results in an outage. The change is applied during the next maintenance window unless ApplyImmediately is enabled.

To list all of the available engine versions for MySQL 5.6-compatible Aurora, use the following command:

aws rds describe-db-engine-versions --engine aurora --query "DBEngineVersions[].EngineVersion"

To list all of the available engine versions for MySQL 5.7-compatible and MySQL 8.0-compatible Aurora, use the following command:

aws rds describe-db-engine-versions --engine aurora-mysql --query "DBEngineVersions[].EngineVersion"

To list all of the available engine versions for Aurora PostgreSQL, use the following command:

aws rds describe-db-engine-versions --engine aurora-postgresql --query "DBEngineVersions[].EngineVersion"

To list all of the available engine versions for RDS for MySQL, use the following command:

aws rds describe-db-engine-versions --engine mysql --query "DBEngineVersions[].EngineVersion"

To list all of the available engine versions for RDS for PostgreSQL, use the following command:

aws rds describe-db-engine-versions --engine postgres --query "DBEngineVersions[].EngineVersion"

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_iops :: Lens' ModifyDBCluster (Maybe Int)

The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for each DB instance in the Multi-AZ DB cluster.

For information about valid IOPS values, see Amazon RDS Provisioned IOPS storage in the Amazon RDS User Guide.

Constraints: Must be a multiple between .5 and 50 of the storage amount for the DB cluster.

Valid for: Multi-AZ DB clusters only

modifyDBCluster_manageMasterUserPassword :: Lens' ModifyDBCluster (Maybe Bool)

A value that indicates whether to manage the master user password with Amazon Web Services Secrets Manager.

If the DB cluster doesn't manage the master user password with Amazon Web Services Secrets Manager, you can turn on this management. In this case, you can't specify MasterUserPassword.

If the DB cluster already manages the master user password with Amazon Web Services Secrets Manager, and you specify that the master user password is not managed with Amazon Web Services Secrets Manager, then you must specify MasterUserPassword. In this case, RDS deletes the secret and uses the new password for the master user specified by MasterUserPassword.

For more information, see Password management with Amazon Web Services Secrets Manager in the Amazon RDS User Guide and Password management with Amazon Web Services Secrets Manager in the Amazon Aurora User Guide.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_masterUserPassword :: Lens' ModifyDBCluster (Maybe Text)

The new password for the master database user. This password can contain any printable ASCII character except "/", """, or "@".

Constraints:

• Must contain from 8 to 41 characters.
• Can't be specified if ManageMasterUserPassword is turned on.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_masterUserSecretKmsKeyId :: Lens' ModifyDBCluster (Maybe Text)

The Amazon Web Services KMS key identifier to encrypt a secret that is automatically generated and managed in Amazon Web Services Secrets Manager.

This setting is valid only if both of the following conditions are met:

• The DB cluster doesn't manage the master user password in Amazon Web Services Secrets Manager.

  If the DB cluster already manages the master user password in Amazon Web Services Secrets Manager, you can't change the KMS key that is used to encrypt the secret.

• You are turning on ManageMasterUserPassword to manage the master user password in Amazon Web Services Secrets Manager.

  If you are turning on ManageMasterUserPassword and don't specify MasterUserSecretKmsKeyId, then the aws/secretsmanager KMS key is used to encrypt the secret. If the secret is in a different Amazon Web Services account, then you can't use the aws/secretsmanager KMS key to encrypt the secret, and you must use a customer managed KMS key.

The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key. To use a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN.

There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_monitoringInterval :: Lens' ModifyDBCluster (Maybe Int)

The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the DB cluster. To turn off collecting Enhanced Monitoring metrics, specify 0. The default is 0.

If MonitoringRoleArn is specified, also set MonitoringInterval to a value other than 0.

Valid Values: 0, 1, 5, 10, 15, 30, 60

Valid for: Multi-AZ DB clusters only

modifyDBCluster_monitoringRoleArn :: Lens' ModifyDBCluster (Maybe Text)

The Amazon Resource Name (ARN) for the IAM role that permits RDS to send Enhanced Monitoring metrics to Amazon CloudWatch Logs. An example is arn:aws:iam:123456789012:role/emaccess. For information on creating a monitoring role, see To create an IAM role for Amazon RDS Enhanced Monitoring in the Amazon RDS User Guide.

If MonitoringInterval is set to a value other than 0, supply a MonitoringRoleArn value.

Valid for: Multi-AZ DB clusters only

modifyDBCluster_networkType :: Lens' ModifyDBCluster (Maybe Text)

The network type of the DB cluster.

Valid values:

• IPV4

• DUAL

The network type is determined by the DBSubnetGroup specified for the DB cluster. A DBSubnetGroup can support only the IPv4 protocol or the IPv4 and the IPv6 protocols (DUAL).

For more information, see Working with a DB instance in a VPC in the Amazon Aurora User Guide.

Valid for: Aurora DB clusters only

modifyDBCluster_newDBClusterIdentifier :: Lens' ModifyDBCluster (Maybe Text)

The new DB cluster identifier for the DB cluster when renaming a DB cluster. This value is stored as a lowercase string.

Constraints:

• Must contain from 1 to 63 letters, numbers, or hyphens
• The first character must be a letter
• Can't end with a hyphen or contain two consecutive hyphens

Example: my-cluster2

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_optionGroupName :: Lens' ModifyDBCluster (Maybe Text)

A value that indicates that the DB cluster should be associated with the specified option group.

DB clusters are associated with a default option group that can't be modified.

modifyDBCluster_performanceInsightsKMSKeyId :: Lens' ModifyDBCluster (Maybe Text)

The Amazon Web Services KMS key identifier for encryption of Performance Insights data.

The Amazon Web Services KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.

If you don't specify a value for PerformanceInsightsKMSKeyId, then Amazon RDS uses your default KMS key. There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services Region.

Valid for: Multi-AZ DB clusters only

modifyDBCluster_performanceInsightsRetentionPeriod :: Lens' ModifyDBCluster (Maybe Int)

The number of days to retain Performance Insights data. The default is 7 days. The following values are valid:

• 7
• month * 31, where month is a number of months from 1-23
• 731

For example, the following values are valid:

• 93 (3 months * 31)
• 341 (11 months * 31)
• 589 (19 months * 31)
• 731

If you specify a retention period such as 94, which isn't a valid value, RDS issues an error.

Valid for: Multi-AZ DB clusters only

modifyDBCluster_port :: Lens' ModifyDBCluster (Maybe Int)

The port number on which the DB cluster accepts connections.

Constraints: Value must be 1150-65535

Default: The same port as the original DB cluster.

Valid for: Aurora DB clusters only

modifyDBCluster_preferredBackupWindow :: Lens' ModifyDBCluster (Maybe Text)

The daily time range during which automated backups are created if automated backups are enabled, using the BackupRetentionPeriod parameter.

The default is a 30-minute window selected at random from an 8-hour block of time for each Amazon Web Services Region. To view the time blocks available, see Backup window in the Amazon Aurora User Guide.

Constraints:

• Must be in the format hh24:mi-hh24:mi.
• Must be in Universal Coordinated Time (UTC).
• Must not conflict with the preferred maintenance window.
• Must be at least 30 minutes.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_preferredMaintenanceWindow :: Lens' ModifyDBCluster (Maybe Text)

The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).

Format: ddd:hh24:mi-ddd:hh24:mi

The default is a 30-minute window selected at random from an 8-hour block of time for each Amazon Web Services Region, occurring on a random day of the week. To see the time blocks available, see Adjusting the Preferred DB Cluster Maintenance Window in the Amazon Aurora User Guide.

Valid Days: Mon, Tue, Wed, Thu, Fri, Sat, Sun.

Constraints: Minimum 30-minute window.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_rotateMasterUserPassword :: Lens' ModifyDBCluster (Maybe Bool)

A value that indicates whether to rotate the secret managed by Amazon Web Services Secrets Manager for the master user password.

This setting is valid only if the master user password is managed by RDS in Amazon Web Services Secrets Manager for the DB cluster. The secret value contains the updated password.

For more information, see Password management with Amazon Web Services Secrets Manager in the Amazon RDS User Guide and Password management with Amazon Web Services Secrets Manager in the Amazon Aurora User Guide.

Constraints:

• You must apply the change immediately when rotating the master user password.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_scalingConfiguration :: Lens' ModifyDBCluster (Maybe ScalingConfiguration)

The scaling properties of the DB cluster. You can only modify scaling properties for DB clusters in serverless DB engine mode.

Valid for: Aurora DB clusters only

modifyDBCluster_serverlessV2ScalingConfiguration :: Lens' ModifyDBCluster (Maybe ServerlessV2ScalingConfiguration)

Undocumented member.

modifyDBCluster_storageType :: Lens' ModifyDBCluster (Maybe Text)

Specifies the storage type to be associated with the DB cluster.

Valid values: io1

When specified, a value for the Iops parameter is required.

Default: io1

Valid for: Multi-AZ DB clusters only

modifyDBCluster_vpcSecurityGroupIds :: Lens' ModifyDBCluster (Maybe [Text])

A list of VPC security groups that the DB cluster will belong to.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

modifyDBCluster_dbClusterIdentifier :: Lens' ModifyDBCluster Text

The DB cluster identifier for the cluster being modified. This parameter isn't case-sensitive.

Constraints: This identifier must match the identifier of an existing DB cluster.

Valid for: Aurora DB clusters and Multi-AZ DB clusters

Destructuring the Response

data ModifyDBClusterResponse

See: newModifyDBClusterResponse smart constructor.

Constructors

ModifyDBClusterResponse'

Fields

• dbCluster :: Maybe DBCluster
• httpStatus :: Int

  The response's http status code.

Instances

Generic ModifyDBClusterResponse

Defined in Amazonka.RDS.ModifyDBCluster

Associated Types

type Rep ModifyDBClusterResponse :: Type -> Type

Methods

from :: ModifyDBClusterResponse -> Rep ModifyDBClusterResponse x

to :: Rep ModifyDBClusterResponse x -> ModifyDBClusterResponse

Read ModifyDBClusterResponse

Defined in Amazonka.RDS.ModifyDBCluster

Methods

readsPrec :: Int -> ReadS ModifyDBClusterResponse

readList :: ReadS [ModifyDBClusterResponse]

readPrec :: ReadPrec ModifyDBClusterResponse

readListPrec :: ReadPrec [ModifyDBClusterResponse]

Show ModifyDBClusterResponse

Defined in Amazonka.RDS.ModifyDBCluster

Methods

showsPrec :: Int -> ModifyDBClusterResponse -> ShowS

show :: ModifyDBClusterResponse -> String

showList :: [ModifyDBClusterResponse] -> ShowS

NFData ModifyDBClusterResponse

Defined in Amazonka.RDS.ModifyDBCluster

Methods

rnf :: ModifyDBClusterResponse -> ()

Eq ModifyDBClusterResponse

Defined in Amazonka.RDS.ModifyDBCluster

Methods

(==) :: ModifyDBClusterResponse -> ModifyDBClusterResponse -> Bool

(/=) :: ModifyDBClusterResponse -> ModifyDBClusterResponse -> Bool

type Rep ModifyDBClusterResponse

Defined in Amazonka.RDS.ModifyDBCluster

type Rep ModifyDBClusterResponse = D1 ('MetaData "ModifyDBClusterResponse" "Amazonka.RDS.ModifyDBCluster" "amazonka-rds-2.0-3xXyiLHmAvvCXXUIx1uhpP" 'False) (C1 ('MetaCons "ModifyDBClusterResponse'" 'PrefixI 'True) (S1 ('MetaSel ('Just "dbCluster") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe DBCluster)) :*: S1 ('MetaSel ('Just "httpStatus") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Int)))

newModifyDBClusterResponse

Arguments

:: Int

$sel:httpStatus:ModifyDBClusterResponse'

-> ModifyDBClusterResponse

Create a value of ModifyDBClusterResponse with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:dbCluster:ModifyDBClusterResponse', modifyDBClusterResponse_dbCluster - Undocumented member.

$sel:httpStatus:ModifyDBClusterResponse', modifyDBClusterResponse_httpStatus - The response's http status code.

Response Lenses

modifyDBClusterResponse_dbCluster :: Lens' ModifyDBClusterResponse (Maybe DBCluster)

Undocumented member.

modifyDBClusterResponse_httpStatus :: Lens' ModifyDBClusterResponse Int

The response's http status code.