Amazonka.SQS.Types.SendMessageBatchRequestEntry

Documentation

data SendMessageBatchRequestEntry

Contains the details of a single Amazon SQS message along with an Id.

See: newSendMessageBatchRequestEntry smart constructor.

Constructors

SendMessageBatchRequestEntry'

Fields

• delaySeconds :: Maybe Int

  The length of time, in seconds, for which a specific message is delayed. Valid values: 0 to 900. Maximum: 15 minutes. Messages with a positive DelaySeconds value become available for processing after the delay period is finished. If you don't specify a value, the default value for the queue is applied.

  When you set FifoQueue, you can't set DelaySeconds per message. You can set this parameter only on a queue level.

• messageAttributes :: Maybe (HashMap Text MessageAttributeValue)

  Each message attribute consists of a Name, Type, and Value. For more information, see Amazon SQS message attributes in the Amazon SQS Developer Guide.

• messageDeduplicationId :: Maybe Text

  This parameter applies only to FIFO (first-in-first-out) queues.

  The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a message with a particular MessageDeduplicationId is sent successfully, subsequent messages with the same MessageDeduplicationId are accepted successfully but aren't delivered. For more information, see Exactly-once processing in the Amazon SQS Developer Guide.

  • Every message must have a unique MessageDeduplicationId,

    • You may provide a MessageDeduplicationId explicitly.
    • If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).
    • If you don't provide a MessageDeduplicationId and the queue doesn't have ContentBasedDeduplication set, the action fails with an error.
    • If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.
  • When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.
  • If you send one message with ContentBasedDeduplication enabled and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.

  The MessageDeduplicationId is available to the consumer of the message (this can be useful for troubleshooting delivery issues).

  If a message is sent successfully but the acknowledgement is lost and the message is resent with the same MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate messages.

  Amazon SQS continues to keep track of the message deduplication ID even after the message is received and deleted.

  The length of MessageDeduplicationId is 128 characters. MessageDeduplicationId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).

  For best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property in the Amazon SQS Developer Guide.

• messageGroupId :: Maybe Text

  This parameter applies only to FIFO (first-in-first-out) queues.

  The tag that specifies that a message belongs to a specific message group. Messages that belong to the same message group are processed in a FIFO manner (however, messages in different message groups might be processed out of order). To interleave multiple ordered streams within a single queue, use MessageGroupId values (for example, session data for multiple users). In this scenario, multiple consumers can process the queue, but the session data of each user is processed in a FIFO fashion.

  • You must associate a non-empty MessageGroupId with a message. If you don't provide a MessageGroupId, the action fails.
  • ReceiveMessage might return messages with multiple MessageGroupId values. For each MessageGroupId, the messages are sorted by time sent. The caller can't specify a MessageGroupId.

  The length of MessageGroupId is 128 characters. Valid values: alphanumeric characters and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).

  For best practices of using MessageGroupId, see Using the MessageGroupId Property in the Amazon SQS Developer Guide.

  MessageGroupId is required for FIFO queues. You can't use it for Standard queues.

• messageSystemAttributes :: Maybe (HashMap MessageSystemAttributeNameForSends MessageSystemAttributeValue)

  The message system attribute to send Each message system attribute consists of a Name, Type, and Value.

  • Currently, the only supported message system attribute is AWSTraceHeader. Its type must be String and its value must be a correctly formatted X-Ray trace header string.
  • The size of a message system attribute doesn't count towards the total size of a message.
• id :: Text

  An identifier for a message in this batch used to communicate the result.

  The Ids of a batch request need to be unique within a request.

  This identifier can have up to 80 characters. The following characters are accepted: alphanumeric characters, hyphens(-), and underscores (_).

• messageBody :: Text

  The body of the message.

Instances

ToQuery SendMessageBatchRequestEntry

Defined in Amazonka.SQS.Types.SendMessageBatchRequestEntry

Methods

toQuery :: SendMessageBatchRequestEntry -> QueryString

Generic SendMessageBatchRequestEntry

Defined in Amazonka.SQS.Types.SendMessageBatchRequestEntry

Associated Types

type Rep SendMessageBatchRequestEntry :: Type -> Type

Methods

from :: SendMessageBatchRequestEntry -> Rep SendMessageBatchRequestEntry x

to :: Rep SendMessageBatchRequestEntry x -> SendMessageBatchRequestEntry

Read SendMessageBatchRequestEntry

Defined in Amazonka.SQS.Types.SendMessageBatchRequestEntry

Methods

readsPrec :: Int -> ReadS SendMessageBatchRequestEntry

readList :: ReadS [SendMessageBatchRequestEntry]

readPrec :: ReadPrec SendMessageBatchRequestEntry

readListPrec :: ReadPrec [SendMessageBatchRequestEntry]

Show SendMessageBatchRequestEntry

Defined in Amazonka.SQS.Types.SendMessageBatchRequestEntry

Methods

showsPrec :: Int -> SendMessageBatchRequestEntry -> ShowS

show :: SendMessageBatchRequestEntry -> String

showList :: [SendMessageBatchRequestEntry] -> ShowS

NFData SendMessageBatchRequestEntry

Defined in Amazonka.SQS.Types.SendMessageBatchRequestEntry

Methods

rnf :: SendMessageBatchRequestEntry -> ()

Eq SendMessageBatchRequestEntry

Defined in Amazonka.SQS.Types.SendMessageBatchRequestEntry

Methods

(==) :: SendMessageBatchRequestEntry -> SendMessageBatchRequestEntry -> Bool

(/=) :: SendMessageBatchRequestEntry -> SendMessageBatchRequestEntry -> Bool

Hashable SendMessageBatchRequestEntry

Defined in Amazonka.SQS.Types.SendMessageBatchRequestEntry

Methods

hashWithSalt :: Int -> SendMessageBatchRequestEntry -> Int

hash :: SendMessageBatchRequestEntry -> Int

type Rep SendMessageBatchRequestEntry

Defined in Amazonka.SQS.Types.SendMessageBatchRequestEntry

type Rep SendMessageBatchRequestEntry = D1 ('MetaData "SendMessageBatchRequestEntry" "Amazonka.SQS.Types.SendMessageBatchRequestEntry" "amazonka-sqs-2.0-8jRKm0MCN6JIBFunCpUxaV" 'False) (C1 ('MetaCons "SendMessageBatchRequestEntry'" 'PrefixI 'True) ((S1 ('MetaSel ('Just "delaySeconds") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)) :*: (S1 ('MetaSel ('Just "messageAttributes") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe (HashMap Text MessageAttributeValue))) :*: S1 ('MetaSel ('Just "messageDeduplicationId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: ((S1 ('MetaSel ('Just "messageGroupId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "messageSystemAttributes") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe (HashMap MessageSystemAttributeNameForSends MessageSystemAttributeValue)))) :*: (S1 ('MetaSel ('Just "id") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Text) :*: S1 ('MetaSel ('Just "messageBody") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Text)))))

newSendMessageBatchRequestEntry

Arguments

:: Text

$sel:id:SendMessageBatchRequestEntry'

-> Text

$sel:messageBody:SendMessageBatchRequestEntry'

-> SendMessageBatchRequestEntry

Create a value of SendMessageBatchRequestEntry with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:delaySeconds:SendMessageBatchRequestEntry', sendMessageBatchRequestEntry_delaySeconds - The length of time, in seconds, for which a specific message is delayed. Valid values: 0 to 900. Maximum: 15 minutes. Messages with a positive DelaySeconds value become available for processing after the delay period is finished. If you don't specify a value, the default value for the queue is applied.

When you set FifoQueue, you can't set DelaySeconds per message. You can set this parameter only on a queue level.

$sel:messageAttributes:SendMessageBatchRequestEntry', sendMessageBatchRequestEntry_messageAttributes - Each message attribute consists of a Name, Type, and Value. For more information, see Amazon SQS message attributes in the Amazon SQS Developer Guide.

$sel:messageDeduplicationId:SendMessageBatchRequestEntry', sendMessageBatchRequestEntry_messageDeduplicationId - This parameter applies only to FIFO (first-in-first-out) queues.

The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a message with a particular MessageDeduplicationId is sent successfully, subsequent messages with the same MessageDeduplicationId are accepted successfully but aren't delivered. For more information, see Exactly-once processing in the Amazon SQS Developer Guide.

• Every message must have a unique MessageDeduplicationId,

  • You may provide a MessageDeduplicationId explicitly.
  • If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).
  • If you don't provide a MessageDeduplicationId and the queue doesn't have ContentBasedDeduplication set, the action fails with an error.
  • If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.
• When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.
• If you send one message with ContentBasedDeduplication enabled and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.

The MessageDeduplicationId is available to the consumer of the message (this can be useful for troubleshooting delivery issues).

If a message is sent successfully but the acknowledgement is lost and the message is resent with the same MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate messages.

Amazon SQS continues to keep track of the message deduplication ID even after the message is received and deleted.

The length of MessageDeduplicationId is 128 characters. MessageDeduplicationId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).

For best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property in the Amazon SQS Developer Guide.

$sel:messageGroupId:SendMessageBatchRequestEntry', sendMessageBatchRequestEntry_messageGroupId - This parameter applies only to FIFO (first-in-first-out) queues.

The tag that specifies that a message belongs to a specific message group. Messages that belong to the same message group are processed in a FIFO manner (however, messages in different message groups might be processed out of order). To interleave multiple ordered streams within a single queue, use MessageGroupId values (for example, session data for multiple users). In this scenario, multiple consumers can process the queue, but the session data of each user is processed in a FIFO fashion.

• You must associate a non-empty MessageGroupId with a message. If you don't provide a MessageGroupId, the action fails.
• ReceiveMessage might return messages with multiple MessageGroupId values. For each MessageGroupId, the messages are sorted by time sent. The caller can't specify a MessageGroupId.

The length of MessageGroupId is 128 characters. Valid values: alphanumeric characters and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).

For best practices of using MessageGroupId, see Using the MessageGroupId Property in the Amazon SQS Developer Guide.

MessageGroupId is required for FIFO queues. You can't use it for Standard queues.

$sel:messageSystemAttributes:SendMessageBatchRequestEntry', sendMessageBatchRequestEntry_messageSystemAttributes - The message system attribute to send Each message system attribute consists of a Name, Type, and Value.

• Currently, the only supported message system attribute is AWSTraceHeader. Its type must be String and its value must be a correctly formatted X-Ray trace header string.
• The size of a message system attribute doesn't count towards the total size of a message.

$sel:id:SendMessageBatchRequestEntry', sendMessageBatchRequestEntry_id - An identifier for a message in this batch used to communicate the result.

The Ids of a batch request need to be unique within a request.

This identifier can have up to 80 characters. The following characters are accepted: alphanumeric characters, hyphens(-), and underscores (_).

$sel:messageBody:SendMessageBatchRequestEntry', sendMessageBatchRequestEntry_messageBody - The body of the message.

sendMessageBatchRequestEntry_delaySeconds :: Lens' SendMessageBatchRequestEntry (Maybe Int)

The length of time, in seconds, for which a specific message is delayed. Valid values: 0 to 900. Maximum: 15 minutes. Messages with a positive DelaySeconds value become available for processing after the delay period is finished. If you don't specify a value, the default value for the queue is applied.

When you set FifoQueue, you can't set DelaySeconds per message. You can set this parameter only on a queue level.

sendMessageBatchRequestEntry_messageAttributes :: Lens' SendMessageBatchRequestEntry (Maybe (HashMap Text MessageAttributeValue))

Each message attribute consists of a Name, Type, and Value. For more information, see Amazon SQS message attributes in the Amazon SQS Developer Guide.

sendMessageBatchRequestEntry_messageDeduplicationId :: Lens' SendMessageBatchRequestEntry (Maybe Text)

This parameter applies only to FIFO (first-in-first-out) queues.

The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a message with a particular MessageDeduplicationId is sent successfully, subsequent messages with the same MessageDeduplicationId are accepted successfully but aren't delivered. For more information, see Exactly-once processing in the Amazon SQS Developer Guide.

• Every message must have a unique MessageDeduplicationId,

  • You may provide a MessageDeduplicationId explicitly.
  • If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).
  • If you don't provide a MessageDeduplicationId and the queue doesn't have ContentBasedDeduplication set, the action fails with an error.
  • If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.
• When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.
• If you send one message with ContentBasedDeduplication enabled and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.

The MessageDeduplicationId is available to the consumer of the message (this can be useful for troubleshooting delivery issues).

If a message is sent successfully but the acknowledgement is lost and the message is resent with the same MessageDeduplicationId after the deduplication interval, Amazon SQS can't detect duplicate messages.

Amazon SQS continues to keep track of the message deduplication ID even after the message is received and deleted.

The length of MessageDeduplicationId is 128 characters. MessageDeduplicationId can contain alphanumeric characters (a-z, A-Z, 0-9) and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).

For best practices of using MessageDeduplicationId, see Using the MessageDeduplicationId Property in the Amazon SQS Developer Guide.

sendMessageBatchRequestEntry_messageGroupId :: Lens' SendMessageBatchRequestEntry (Maybe Text)

This parameter applies only to FIFO (first-in-first-out) queues.

The tag that specifies that a message belongs to a specific message group. Messages that belong to the same message group are processed in a FIFO manner (however, messages in different message groups might be processed out of order). To interleave multiple ordered streams within a single queue, use MessageGroupId values (for example, session data for multiple users). In this scenario, multiple consumers can process the queue, but the session data of each user is processed in a FIFO fashion.

• You must associate a non-empty MessageGroupId with a message. If you don't provide a MessageGroupId, the action fails.
• ReceiveMessage might return messages with multiple MessageGroupId values. For each MessageGroupId, the messages are sorted by time sent. The caller can't specify a MessageGroupId.

The length of MessageGroupId is 128 characters. Valid values: alphanumeric characters and punctuation (!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~).

For best practices of using MessageGroupId, see Using the MessageGroupId Property in the Amazon SQS Developer Guide.

MessageGroupId is required for FIFO queues. You can't use it for Standard queues.

sendMessageBatchRequestEntry_messageSystemAttributes :: Lens' SendMessageBatchRequestEntry (Maybe (HashMap MessageSystemAttributeNameForSends MessageSystemAttributeValue))

The message system attribute to send Each message system attribute consists of a Name, Type, and Value.

• Currently, the only supported message system attribute is AWSTraceHeader. Its type must be String and its value must be a correctly formatted X-Ray trace header string.
• The size of a message system attribute doesn't count towards the total size of a message.

sendMessageBatchRequestEntry_id :: Lens' SendMessageBatchRequestEntry Text

An identifier for a message in this batch used to communicate the result.

The Ids of a batch request need to be unique within a request.

This identifier can have up to 80 characters. The following characters are accepted: alphanumeric characters, hyphens(-), and underscores (_).

sendMessageBatchRequestEntry_messageBody :: Lens' SendMessageBatchRequestEntry Text

The body of the message.