{-# LANGUAGE Trustworthy #-}
{-# LANGUAGE CPP
           , NoImplicitPrelude
           , ExistentialQuantification
  #-}
{-# OPTIONS_GHC -funbox-strict-fields #-}
{-# OPTIONS_HADDOCK not-home #-}

-----------------------------------------------------------------------------
-- |
-- Module      :  GHC.IO.Handle.Types
-- Copyright   :  (c) The University of Glasgow, 1994-2009
-- License     :  see libraries/base/LICENSE
--
-- Maintainer  :  libraries@haskell.org
-- Stability   :  internal
-- Portability :  non-portable
--
-- Basic types for the implementation of IO Handles.
--
-----------------------------------------------------------------------------

module GHC.IO.Handle.Types (
      Handle(..), Handle__(..), showHandle,
      checkHandleInvariants,
      BufferList(..),
      HandleType(..),
      isReadableHandleType, isWritableHandleType, isReadWriteHandleType,
      isAppendHandleType,
      BufferMode(..),
      BufferCodec(..),
      NewlineMode(..), Newline(..), nativeNewline,
      universalNewlineMode, noNewlineTranslation, nativeNewlineMode
  ) where

#undef DEBUG

import GHC.Base
import GHC.MVar
import GHC.IO
import GHC.IO.Buffer
import GHC.IO.BufferedIO
import GHC.IO.Encoding.Types
import GHC.IORef
import GHC.Show
import GHC.Read
import GHC.Word
import GHC.IO.Device
import Data.Typeable
#if defined(DEBUG)
import Control.Monad
#endif

-- ---------------------------------------------------------------------------
-- Handle type

--  A Handle is represented by (a reference to) a record
--  containing the state of the I/O port/device. We record
--  the following pieces of info:

--    * type (read,write,closed etc.)
--    * the underlying file descriptor
--    * buffering mode
--    * buffer, and spare buffers
--    * user-friendly name (usually the
--      FilePath used when IO.openFile was called)

-- Note: when a Handle is garbage collected, we want to flush its buffer
-- and close the OS file handle, so as to free up a (precious) resource.

-- | Haskell defines operations to read and write characters from and to files,
-- represented by values of type @Handle@.  Each value of this type is a
-- /handle/: a record used by the Haskell run-time system to /manage/ I\/O
-- with file system objects.  A handle has at least the following properties:
--
--  * whether it manages input or output or both;
--
--  * whether it is /open/, /closed/ or /semi-closed/;
--
--  * whether the object is seekable;
--
--  * whether buffering is disabled, or enabled on a line or block basis;
--
--  * a buffer (whose length may be zero).
--
-- Most handles will also have a current I\/O position indicating where the next
-- input or output operation will occur.  A handle is /readable/ if it
-- manages only input or both input and output; likewise, it is /writable/ if
-- it manages only output or both input and output.  A handle is /open/ when
-- first allocated.
-- Once it is closed it can no longer be used for either input or output,
-- though an implementation cannot re-use its storage while references
-- remain to it.  Handles are in the 'Show' and 'Eq' classes.  The string
-- produced by showing a handle is system dependent; it should include
-- enough information to identify the handle for debugging.  A handle is
-- equal according to '==' only to itself; no attempt
-- is made to compare the internal state of different handles for equality.

data Handle
  = FileHandle                          -- A normal handle to a file
        FilePath                        -- the file (used for error messages
                                        -- only)
        !(MVar Handle__)

  | DuplexHandle                        -- A handle to a read/write stream
        FilePath                        -- file for a FIFO, otherwise some
                                        --   descriptive string (used for error
                                        --   messages only)
        !(MVar Handle__)                -- The read side
        !(MVar Handle__)                -- The write side

-- NOTES:
--    * A 'FileHandle' is seekable.  A 'DuplexHandle' may or may not be
--      seekable.

-- | @since 4.1.0.0
instance Eq Handle where
 (FileHandle FilePath
_ MVar Handle__
h1)     == :: Handle -> Handle -> Bool
== (FileHandle FilePath
_ MVar Handle__
h2)     = MVar Handle__
h1 MVar Handle__ -> MVar Handle__ -> Bool
forall a. Eq a => a -> a -> Bool
== MVar Handle__
h2
 (DuplexHandle FilePath
_ MVar Handle__
h1 MVar Handle__
_) == (DuplexHandle FilePath
_ MVar Handle__
h2 MVar Handle__
_) = MVar Handle__
h1 MVar Handle__ -> MVar Handle__ -> Bool
forall a. Eq a => a -> a -> Bool
== MVar Handle__
h2
 Handle
_ == Handle
_ = Bool
False

data Handle__
  = forall dev enc_state dec_state . (RawIO dev, IODevice dev, BufferedIO dev, Typeable dev) =>
    Handle__ {
      ()
haDevice      :: !dev,
      Handle__ -> HandleType
haType        :: HandleType,           -- type (read/write/append etc.)
      Handle__ -> IORef (Buffer Word8)
haByteBuffer  :: !(IORef (Buffer Word8)), -- See [note Buffering Implementation]
      Handle__ -> BufferMode
haBufferMode  :: BufferMode,
      ()
haLastDecode  :: !(IORef (dec_state, Buffer Word8)),
      -- ^ The byte buffer just  before we did our last batch of decoding.
      Handle__ -> IORef (Buffer CharBufElem)
haCharBuffer  :: !(IORef (Buffer CharBufElem)), -- See [note Buffering Implementation]
      Handle__ -> IORef (BufferList CharBufElem)
haBuffers     :: !(IORef (BufferList CharBufElem)),  -- spare buffers
      ()
haEncoder     :: Maybe (TextEncoder enc_state),
      ()
haDecoder     :: Maybe (TextDecoder dec_state),
      Handle__ -> Maybe TextEncoding
haCodec       :: Maybe TextEncoding,
      Handle__ -> Newline
haInputNL     :: Newline,
      Handle__ -> Newline
haOutputNL    :: Newline,
      Handle__ -> Maybe (MVar Handle__)
haOtherSide   :: Maybe (MVar Handle__) -- ptr to the write side of a
                                             -- duplex handle.
    }

-- we keep a few spare buffers around in a handle to avoid allocating
-- a new one for each hPutStr.  These buffers are *guaranteed* to be the
-- same size as the main buffer.
data BufferList e
  = BufferListNil
  | BufferListCons (RawBuffer e) (BufferList e)

--  Internally, we classify handles as being one
--  of the following:

data HandleType
 = ClosedHandle
 | SemiClosedHandle
 | ReadHandle
 | WriteHandle
 | AppendHandle
 | ReadWriteHandle

isReadableHandleType :: HandleType -> Bool
isReadableHandleType :: HandleType -> Bool
isReadableHandleType HandleType
ReadHandle         = Bool
True
isReadableHandleType HandleType
ReadWriteHandle    = Bool
True
isReadableHandleType HandleType
_                  = Bool
False

isWritableHandleType :: HandleType -> Bool
isWritableHandleType :: HandleType -> Bool
isWritableHandleType HandleType
AppendHandle    = Bool
True
isWritableHandleType HandleType
WriteHandle     = Bool
True
isWritableHandleType HandleType
ReadWriteHandle = Bool
True
isWritableHandleType HandleType
_               = Bool
False

isReadWriteHandleType :: HandleType -> Bool
isReadWriteHandleType :: HandleType -> Bool
isReadWriteHandleType ReadWriteHandle{} = Bool
True
isReadWriteHandleType HandleType
_                 = Bool
False

isAppendHandleType :: HandleType -> Bool
isAppendHandleType :: HandleType -> Bool
isAppendHandleType HandleType
AppendHandle = Bool
True
isAppendHandleType HandleType
_            = Bool
False


-- INVARIANTS on Handles:
--
--   * A handle *always* has a buffer, even if it is only 1 character long
--     (an unbuffered handle needs a 1 character buffer in order to support
--      hLookAhead and hIsEOF).
--   * In a read Handle, the byte buffer is always empty (we decode when reading)
--   * In a wriite Handle, the Char buffer is always empty (we encode when writing)
--
checkHandleInvariants :: Handle__ -> IO ()
#if defined(DEBUG)
checkHandleInvariants h_ = do
 bbuf <- readIORef (haByteBuffer h_)
 checkBuffer bbuf
 cbuf <- readIORef (haCharBuffer h_)
 checkBuffer cbuf
 when (isWriteBuffer cbuf && not (isEmptyBuffer cbuf)) $
   errorWithoutStackTrace ("checkHandleInvariants: char write buffer non-empty: " ++
          summaryBuffer bbuf ++ ", " ++ summaryBuffer cbuf)
 when (isWriteBuffer bbuf /= isWriteBuffer cbuf) $
   errorWithoutStackTrace ("checkHandleInvariants: buffer modes differ: " ++
          summaryBuffer bbuf ++ ", " ++ summaryBuffer cbuf)

#else
checkHandleInvariants :: Handle__ -> IO ()
checkHandleInvariants Handle__
_ = () -> IO ()
forall a. a -> IO a
forall (m :: * -> *) a. Monad m => a -> m a
return ()
#endif

-- ---------------------------------------------------------------------------
-- Buffering modes

-- | Three kinds of buffering are supported: line-buffering,
-- block-buffering or no-buffering.  These modes have the following
-- effects. For output, items are written out, or /flushed/,
-- from the internal buffer according to the buffer mode:
--
--  * /line-buffering/: the entire output buffer is flushed
--    whenever a newline is output, the buffer overflows,
--    a 'System.IO.hFlush' is issued, or the handle is closed.
--
--  * /block-buffering/: the entire buffer is written out whenever it
--    overflows, a 'System.IO.hFlush' is issued, or the handle is closed.
--
--  * /no-buffering/: output is written immediately, and never stored
--    in the buffer.
--
-- An implementation is free to flush the buffer more frequently,
-- but not less frequently, than specified above.
-- The output buffer is emptied as soon as it has been written out.
--
-- Similarly, input occurs according to the buffer mode for the handle:
--
--  * /line-buffering/: when the buffer for the handle is not empty,
--    the next item is obtained from the buffer; otherwise, when the
--    buffer is empty, characters up to and including the next newline
--    character are read into the buffer.  No characters are available
--    until the newline character is available or the buffer is full.
--
--  * /block-buffering/: when the buffer for the handle becomes empty,
--    the next block of data is read into the buffer.
--
--  * /no-buffering/: the next input item is read and returned.
--    The 'System.IO.hLookAhead' operation implies that even a no-buffered
--    handle may require a one-character buffer.
--
-- The default buffering mode when a handle is opened is
-- implementation-dependent and may depend on the file system object
-- which is attached to that handle.
-- For most implementations, physical files will normally be block-buffered
-- and terminals will normally be line-buffered.

data BufferMode
 = NoBuffering  -- ^ buffering is disabled if possible.
 | LineBuffering
                -- ^ line-buffering should be enabled if possible.
 | BlockBuffering (Maybe Int)
                -- ^ block-buffering should be enabled if possible.
                -- The size of the buffer is @n@ items if the argument
                -- is 'Just' @n@ and is otherwise implementation-dependent.
   deriving ( BufferMode -> BufferMode -> Bool
(BufferMode -> BufferMode -> Bool)
-> (BufferMode -> BufferMode -> Bool) -> Eq BufferMode
forall a. (a -> a -> Bool) -> (a -> a -> Bool) -> Eq a
$c== :: BufferMode -> BufferMode -> Bool
== :: BufferMode -> BufferMode -> Bool
$c/= :: BufferMode -> BufferMode -> Bool
/= :: BufferMode -> BufferMode -> Bool
Eq   -- ^ @since 4.2.0.0
            , Eq BufferMode
Eq BufferMode =>
(BufferMode -> BufferMode -> Ordering)
-> (BufferMode -> BufferMode -> Bool)
-> (BufferMode -> BufferMode -> Bool)
-> (BufferMode -> BufferMode -> Bool)
-> (BufferMode -> BufferMode -> Bool)
-> (BufferMode -> BufferMode -> BufferMode)
-> (BufferMode -> BufferMode -> BufferMode)
-> Ord BufferMode
BufferMode -> BufferMode -> Bool
BufferMode -> BufferMode -> Ordering
BufferMode -> BufferMode -> BufferMode
forall a.
Eq a =>
(a -> a -> Ordering)
-> (a -> a -> Bool)
-> (a -> a -> Bool)
-> (a -> a -> Bool)
-> (a -> a -> Bool)
-> (a -> a -> a)
-> (a -> a -> a)
-> Ord a
$ccompare :: BufferMode -> BufferMode -> Ordering
compare :: BufferMode -> BufferMode -> Ordering
$c< :: BufferMode -> BufferMode -> Bool
< :: BufferMode -> BufferMode -> Bool
$c<= :: BufferMode -> BufferMode -> Bool
<= :: BufferMode -> BufferMode -> Bool
$c> :: BufferMode -> BufferMode -> Bool
> :: BufferMode -> BufferMode -> Bool
$c>= :: BufferMode -> BufferMode -> Bool
>= :: BufferMode -> BufferMode -> Bool
$cmax :: BufferMode -> BufferMode -> BufferMode
max :: BufferMode -> BufferMode -> BufferMode
$cmin :: BufferMode -> BufferMode -> BufferMode
min :: BufferMode -> BufferMode -> BufferMode
Ord  -- ^ @since 4.2.0.0
            , ReadPrec [BufferMode]
ReadPrec BufferMode
Int -> ReadS BufferMode
ReadS [BufferMode]
(Int -> ReadS BufferMode)
-> ReadS [BufferMode]
-> ReadPrec BufferMode
-> ReadPrec [BufferMode]
-> Read BufferMode
forall a.
(Int -> ReadS a)
-> ReadS [a] -> ReadPrec a -> ReadPrec [a] -> Read a
$creadsPrec :: Int -> ReadS BufferMode
readsPrec :: Int -> ReadS BufferMode
$creadList :: ReadS [BufferMode]
readList :: ReadS [BufferMode]
$creadPrec :: ReadPrec BufferMode
readPrec :: ReadPrec BufferMode
$creadListPrec :: ReadPrec [BufferMode]
readListPrec :: ReadPrec [BufferMode]
Read -- ^ @since 4.2.0.0
            , Int -> BufferMode -> ShowS
[BufferMode] -> ShowS
BufferMode -> FilePath
(Int -> BufferMode -> ShowS)
-> (BufferMode -> FilePath)
-> ([BufferMode] -> ShowS)
-> Show BufferMode
forall a.
(Int -> a -> ShowS) -> (a -> FilePath) -> ([a] -> ShowS) -> Show a
$cshowsPrec :: Int -> BufferMode -> ShowS
showsPrec :: Int -> BufferMode -> ShowS
$cshow :: BufferMode -> FilePath
show :: BufferMode -> FilePath
$cshowList :: [BufferMode] -> ShowS
showList :: [BufferMode] -> ShowS
Show -- ^ @since 4.2.0.0
            )

{-
[note Buffering Implementation]

Each Handle has two buffers: a byte buffer (haByteBuffer) and a Char
buffer (haCharBuffer).

[note Buffered Reading]

For read Handles, bytes are read into the byte buffer, and immediately
decoded into the Char buffer (see
GHC.IO.Handle.Internals.readTextDevice).  The only way there might be
some data left in the byte buffer is if there is a partial multi-byte
character sequence that cannot be decoded into a full character.

Note that the buffering mode (haBufferMode) makes no difference when
reading data into a Handle.  When reading, we can always just read all
the data there is available without blocking, decode it into the Char
buffer, and then provide it immediately to the caller.

[note Buffered Writing]

Characters are written into the Char buffer by e.g. hPutStr.  At the
end of the operation, or when the char buffer is full, the buffer is
decoded to the byte buffer (see writeCharBuffer).  This is so that we
can detect encoding errors at the right point.

Hence, the Char buffer is always empty between Handle operations.

[note Buffer Sizing]

The char buffer is always a default size (dEFAULT_CHAR_BUFFER_SIZE).
The byte buffer size is chosen by the underlying device (via its
IODevice.newBuffer).  Hence the size of these buffers is not under
user control.

There are certain minimum sizes for these buffers imposed by the
library (but not checked):

 - we must be able to buffer at least one character, so that
   hLookAhead can work

 - the byte buffer must be able to store at least one encoded
   character in the current encoding (6 bytes?)

 - when reading, the char buffer must have room for two characters, so
   that we can spot the \r\n sequence.

How do we implement hSetBuffering?

For reading, we have never used the user-supplied buffer size, because
there's no point: we always pass all available data to the reader
immediately.  Buffering would imply waiting until a certain amount of
data is available, which has no advantages.  So hSetBuffering is
essentially a no-op for read handles, except that it turns on/off raw
mode for the underlying device if necessary.

For writing, the buffering mode is handled by the write operations
themselves (hPutChar and hPutStr).  Every write ends with
writeCharBuffer, which checks whether the buffer should be flushed
according to the current buffering mode.  Additionally, we look for
newlines and flush if the mode is LineBuffering.

[note Buffer Flushing]

** Flushing the Char buffer

We must be able to flush the Char buffer, in order to implement
hSetEncoding, and things like hGetBuf which want to read raw bytes.

Flushing the Char buffer on a write Handle is easy: it is always empty.

Flushing the Char buffer on a read Handle involves rewinding the byte
buffer to the point representing the next Char in the Char buffer.
This is done by

 - remembering the state of the byte buffer *before* the last decode

 - re-decoding the bytes that represent the chars already read from the
   Char buffer.  This gives us the point in the byte buffer that
   represents the *next* Char to be read.

In order for this to work, after readTextHandle we must NOT MODIFY THE
CONTENTS OF THE BYTE OR CHAR BUFFERS, except to remove characters from
the Char buffer.

** Flushing the byte buffer

The byte buffer can be flushed if the Char buffer has already been
flushed (see above).  For a read Handle, flushing the byte buffer
means seeking the device back by the number of bytes in the buffer,
and hence it is only possible on a seekable Handle.

-}

-- ---------------------------------------------------------------------------
-- Newline translation

-- | The representation of a newline in the external file or stream.
data Newline = LF    -- ^ @\'\\n\'@
             | CRLF  -- ^ @\'\\r\\n\'@
             deriving ( Newline -> Newline -> Bool
(Newline -> Newline -> Bool)
-> (Newline -> Newline -> Bool) -> Eq Newline
forall a. (a -> a -> Bool) -> (a -> a -> Bool) -> Eq a
$c== :: Newline -> Newline -> Bool
== :: Newline -> Newline -> Bool
$c/= :: Newline -> Newline -> Bool
/= :: Newline -> Newline -> Bool
Eq   -- ^ @since 4.2.0.0
                      , Eq Newline
Eq Newline =>
(Newline -> Newline -> Ordering)
-> (Newline -> Newline -> Bool)
-> (Newline -> Newline -> Bool)
-> (Newline -> Newline -> Bool)
-> (Newline -> Newline -> Bool)
-> (Newline -> Newline -> Newline)
-> (Newline -> Newline -> Newline)
-> Ord Newline
Newline -> Newline -> Bool
Newline -> Newline -> Ordering
Newline -> Newline -> Newline
forall a.
Eq a =>
(a -> a -> Ordering)
-> (a -> a -> Bool)
-> (a -> a -> Bool)
-> (a -> a -> Bool)
-> (a -> a -> Bool)
-> (a -> a -> a)
-> (a -> a -> a)
-> Ord a
$ccompare :: Newline -> Newline -> Ordering
compare :: Newline -> Newline -> Ordering
$c< :: Newline -> Newline -> Bool
< :: Newline -> Newline -> Bool
$c<= :: Newline -> Newline -> Bool
<= :: Newline -> Newline -> Bool
$c> :: Newline -> Newline -> Bool
> :: Newline -> Newline -> Bool
$c>= :: Newline -> Newline -> Bool
>= :: Newline -> Newline -> Bool
$cmax :: Newline -> Newline -> Newline
max :: Newline -> Newline -> Newline
$cmin :: Newline -> Newline -> Newline
min :: Newline -> Newline -> Newline
Ord  -- ^ @since 4.3.0.0
                      , ReadPrec [Newline]
ReadPrec Newline
Int -> ReadS Newline
ReadS [Newline]
(Int -> ReadS Newline)
-> ReadS [Newline]
-> ReadPrec Newline
-> ReadPrec [Newline]
-> Read Newline
forall a.
(Int -> ReadS a)
-> ReadS [a] -> ReadPrec a -> ReadPrec [a] -> Read a
$creadsPrec :: Int -> ReadS Newline
readsPrec :: Int -> ReadS Newline
$creadList :: ReadS [Newline]
readList :: ReadS [Newline]
$creadPrec :: ReadPrec Newline
readPrec :: ReadPrec Newline
$creadListPrec :: ReadPrec [Newline]
readListPrec :: ReadPrec [Newline]
Read -- ^ @since 4.3.0.0
                      , Int -> Newline -> ShowS
[Newline] -> ShowS
Newline -> FilePath
(Int -> Newline -> ShowS)
-> (Newline -> FilePath) -> ([Newline] -> ShowS) -> Show Newline
forall a.
(Int -> a -> ShowS) -> (a -> FilePath) -> ([a] -> ShowS) -> Show a
$cshowsPrec :: Int -> Newline -> ShowS
showsPrec :: Int -> Newline -> ShowS
$cshow :: Newline -> FilePath
show :: Newline -> FilePath
$cshowList :: [Newline] -> ShowS
showList :: [Newline] -> ShowS
Show -- ^ @since 4.3.0.0
                      )

-- | Specifies the translation, if any, of newline characters between
-- internal Strings and the external file or stream.  Haskell Strings
-- are assumed to represent newlines with the @\'\\n\'@ character; the
-- newline mode specifies how to translate @\'\\n\'@ on output, and what to
-- translate into @\'\\n\'@ on input.
data NewlineMode
  = NewlineMode { NewlineMode -> Newline
inputNL :: Newline,
                    -- ^ the representation of newlines on input
                  NewlineMode -> Newline
outputNL :: Newline
                    -- ^ the representation of newlines on output
                 }
             deriving ( NewlineMode -> NewlineMode -> Bool
(NewlineMode -> NewlineMode -> Bool)
-> (NewlineMode -> NewlineMode -> Bool) -> Eq NewlineMode
forall a. (a -> a -> Bool) -> (a -> a -> Bool) -> Eq a
$c== :: NewlineMode -> NewlineMode -> Bool
== :: NewlineMode -> NewlineMode -> Bool
$c/= :: NewlineMode -> NewlineMode -> Bool
/= :: NewlineMode -> NewlineMode -> Bool
Eq   -- ^ @since 4.2.0.0
                      , Eq NewlineMode
Eq NewlineMode =>
(NewlineMode -> NewlineMode -> Ordering)
-> (NewlineMode -> NewlineMode -> Bool)
-> (NewlineMode -> NewlineMode -> Bool)
-> (NewlineMode -> NewlineMode -> Bool)
-> (NewlineMode -> NewlineMode -> Bool)
-> (NewlineMode -> NewlineMode -> NewlineMode)
-> (NewlineMode -> NewlineMode -> NewlineMode)
-> Ord NewlineMode
NewlineMode -> NewlineMode -> Bool
NewlineMode -> NewlineMode -> Ordering
NewlineMode -> NewlineMode -> NewlineMode
forall a.
Eq a =>
(a -> a -> Ordering)
-> (a -> a -> Bool)
-> (a -> a -> Bool)
-> (a -> a -> Bool)
-> (a -> a -> Bool)
-> (a -> a -> a)
-> (a -> a -> a)
-> Ord a
$ccompare :: NewlineMode -> NewlineMode -> Ordering
compare :: NewlineMode -> NewlineMode -> Ordering
$c< :: NewlineMode -> NewlineMode -> Bool
< :: NewlineMode -> NewlineMode -> Bool
$c<= :: NewlineMode -> NewlineMode -> Bool
<= :: NewlineMode -> NewlineMode -> Bool
$c> :: NewlineMode -> NewlineMode -> Bool
> :: NewlineMode -> NewlineMode -> Bool
$c>= :: NewlineMode -> NewlineMode -> Bool
>= :: NewlineMode -> NewlineMode -> Bool
$cmax :: NewlineMode -> NewlineMode -> NewlineMode
max :: NewlineMode -> NewlineMode -> NewlineMode
$cmin :: NewlineMode -> NewlineMode -> NewlineMode
min :: NewlineMode -> NewlineMode -> NewlineMode
Ord  -- ^ @since 4.3.0.0
                      , ReadPrec [NewlineMode]
ReadPrec NewlineMode
Int -> ReadS NewlineMode
ReadS [NewlineMode]
(Int -> ReadS NewlineMode)
-> ReadS [NewlineMode]
-> ReadPrec NewlineMode
-> ReadPrec [NewlineMode]
-> Read NewlineMode
forall a.
(Int -> ReadS a)
-> ReadS [a] -> ReadPrec a -> ReadPrec [a] -> Read a
$creadsPrec :: Int -> ReadS NewlineMode
readsPrec :: Int -> ReadS NewlineMode
$creadList :: ReadS [NewlineMode]
readList :: ReadS [NewlineMode]
$creadPrec :: ReadPrec NewlineMode
readPrec :: ReadPrec NewlineMode
$creadListPrec :: ReadPrec [NewlineMode]
readListPrec :: ReadPrec [NewlineMode]
Read -- ^ @since 4.3.0.0
                      , Int -> NewlineMode -> ShowS
[NewlineMode] -> ShowS
NewlineMode -> FilePath
(Int -> NewlineMode -> ShowS)
-> (NewlineMode -> FilePath)
-> ([NewlineMode] -> ShowS)
-> Show NewlineMode
forall a.
(Int -> a -> ShowS) -> (a -> FilePath) -> ([a] -> ShowS) -> Show a
$cshowsPrec :: Int -> NewlineMode -> ShowS
showsPrec :: Int -> NewlineMode -> ShowS
$cshow :: NewlineMode -> FilePath
show :: NewlineMode -> FilePath
$cshowList :: [NewlineMode] -> ShowS
showList :: [NewlineMode] -> ShowS
Show -- ^ @since 4.3.0.0
                      )

-- | The native newline representation for the current platform: 'LF'
-- on Unix systems, 'CRLF' on Windows.
nativeNewline :: Newline
#if defined(mingw32_HOST_OS)
nativeNewline = CRLF
#else
nativeNewline :: Newline
nativeNewline = Newline
LF
#endif

-- | Map @\'\\r\\n\'@ into @\'\\n\'@ on input, and @\'\\n\'@ to the native newline
-- representation on output.  This mode can be used on any platform, and
-- works with text files using any newline convention.  The downside is
-- that @readFile >>= writeFile@ might yield a different file.
--
-- > universalNewlineMode  = NewlineMode { inputNL  = CRLF,
-- >                                       outputNL = nativeNewline }
--
universalNewlineMode :: NewlineMode
universalNewlineMode :: NewlineMode
universalNewlineMode  = NewlineMode { inputNL :: Newline
inputNL  = Newline
CRLF,
                                      outputNL :: Newline
outputNL = Newline
nativeNewline }

-- | Use the native newline representation on both input and output
--
-- > nativeNewlineMode  = NewlineMode { inputNL  = nativeNewline
-- >                                    outputNL = nativeNewline }
--
nativeNewlineMode    :: NewlineMode
nativeNewlineMode :: NewlineMode
nativeNewlineMode     = NewlineMode { inputNL :: Newline
inputNL  = Newline
nativeNewline,
                                      outputNL :: Newline
outputNL = Newline
nativeNewline }

-- | Do no newline translation at all.
--
-- > noNewlineTranslation  = NewlineMode { inputNL  = LF, outputNL = LF }
--
noNewlineTranslation :: NewlineMode
noNewlineTranslation :: NewlineMode
noNewlineTranslation  = NewlineMode { inputNL :: Newline
inputNL  = Newline
LF, outputNL :: Newline
outputNL = Newline
LF }

-- ---------------------------------------------------------------------------
-- Show instance for Handles

-- handle types are 'show'n when printing error msgs, so
-- we provide a more user-friendly Show instance for it
-- than the derived one.

-- | @since 4.1.0.0
instance Show HandleType where
  showsPrec :: Int -> HandleType -> ShowS
showsPrec Int
_ HandleType
t =
    case HandleType
t of
      HandleType
ClosedHandle      -> FilePath -> ShowS
showString FilePath
"closed"
      HandleType
SemiClosedHandle  -> FilePath -> ShowS
showString FilePath
"semi-closed"
      HandleType
ReadHandle        -> FilePath -> ShowS
showString FilePath
"readable"
      HandleType
WriteHandle       -> FilePath -> ShowS
showString FilePath
"writable"
      HandleType
AppendHandle      -> FilePath -> ShowS
showString FilePath
"writable (append)"
      HandleType
ReadWriteHandle   -> FilePath -> ShowS
showString FilePath
"read-writable"

-- | @since 4.1.0.0
instance Show Handle where
  showsPrec :: Int -> Handle -> ShowS
showsPrec Int
_ (FileHandle   FilePath
file MVar Handle__
_)   = FilePath -> ShowS
showHandle FilePath
file
  showsPrec Int
_ (DuplexHandle FilePath
file MVar Handle__
_ MVar Handle__
_) = FilePath -> ShowS
showHandle FilePath
file

showHandle :: FilePath -> String -> String
showHandle :: FilePath -> ShowS
showHandle FilePath
file = FilePath -> ShowS
showString FilePath
"{handle: " ShowS -> ShowS -> ShowS
forall b c a. (b -> c) -> (a -> b) -> a -> c
. FilePath -> ShowS
showString FilePath
file ShowS -> ShowS -> ShowS
forall b c a. (b -> c) -> (a -> b) -> a -> c
. FilePath -> ShowS
showString FilePath
"}"