Safe Haskell | None |
---|

Higher-level functions to interact with the elements of a stream. Most of these are based on list functions.

Note that these functions all deal with individual elements of a stream as a
sort of "black box", where there is no introspection of the contained
elements. Values such as `ByteString`

and `Text`

will likely need to be
treated specially to deal with their contents properly (`Word8`

and `Char`

,
respectively). See the Data.Conduit.Binary and Data.Conduit.Text
modules.

- sourceList :: Monad m => [a] -> Producer m a
- sourceNull :: Monad m => Producer m a
- unfold :: Monad m => (b -> Maybe (a, b)) -> b -> Producer m a
- unfoldM :: Monad m => (b -> m (Maybe (a, b))) -> b -> Producer m a
- enumFromTo :: (Enum a, Eq a, Monad m) => a -> a -> Producer m a
- iterate :: Monad m => (a -> a) -> a -> Producer m a
- fold :: Monad m => (b -> a -> b) -> b -> Consumer a m b
- foldMap :: (Monad m, Monoid b) => (a -> b) -> Consumer a m b
- take :: Monad m => Int -> Consumer a m [a]
- drop :: Monad m => Int -> Consumer a m ()
- head :: Monad m => Consumer a m (Maybe a)
- peek :: Monad m => Consumer a m (Maybe a)
- consume :: Monad m => Consumer a m [a]
- sinkNull :: Monad m => Consumer a m ()
- foldMapM :: (Monad m, Monoid b) => (a -> m b) -> Consumer a m b
- foldM :: Monad m => (b -> a -> m b) -> b -> Consumer a m b
- mapM_ :: Monad m => (a -> m ()) -> Consumer a m ()
- map :: Monad m => (a -> b) -> Conduit a m b
- mapMaybe :: Monad m => (a -> Maybe b) -> Conduit a m b
- mapFoldable :: (Monad m, Foldable f) => (a -> f b) -> Conduit a m b
- catMaybes :: Monad m => Conduit (Maybe a) m a
- concat :: (Monad m, Foldable f) => Conduit (f a) m a
- concatMap :: Monad m => (a -> [b]) -> Conduit a m b
- concatMapAccum :: Monad m => (a -> accum -> (accum, [b])) -> accum -> Conduit a m b
- scanl :: Monad m => (a -> s -> (s, b)) -> s -> Conduit a m b
- scan :: Monad m => (a -> b -> b) -> b -> ConduitM a b m b
- mapAccum :: Monad m => (a -> s -> (s, b)) -> s -> ConduitM a b m s
- groupBy :: Monad m => (a -> a -> Bool) -> Conduit a m [a]
- groupOn1 :: (Monad m, Eq b) => (a -> b) -> Conduit a m (a, [a])
- isolate :: Monad m => Int -> Conduit a m a
- filter :: Monad m => (a -> Bool) -> Conduit a m a
- mapM :: Monad m => (a -> m b) -> Conduit a m b
- iterM :: Monad m => (a -> m ()) -> Conduit a m a
- scanlM :: Monad m => (a -> s -> m (s, b)) -> s -> Conduit a m b
- scanM :: Monad m => (a -> b -> m b) -> b -> ConduitM a b m b
- mapAccumM :: Monad m => (a -> s -> m (s, b)) -> s -> ConduitM a b m s
- mapMaybeM :: Monad m => (a -> m (Maybe b)) -> Conduit a m b
- mapFoldableM :: (Monad m, Foldable f) => (a -> m (f b)) -> Conduit a m b
- concatMapM :: Monad m => (a -> m [b]) -> Conduit a m b
- concatMapAccumM :: Monad m => (a -> accum -> m (accum, [b])) -> accum -> Conduit a m b
- sequence :: Monad m => Consumer i m o -> Conduit i m o

# Sources

sourceList :: Monad m => [a] -> Producer m aSource

sourceNull :: Monad m => Producer m aSource

A source that outputs no values. Note that this is just a type-restricted
synonym for `mempty`

.

Since 0.3.0

unfold :: Monad m => (b -> Maybe (a, b)) -> b -> Producer m aSource

Generate a source from a seed value.

Since 0.4.2

unfoldM :: Monad m => (b -> m (Maybe (a, b))) -> b -> Producer m aSource

A monadic unfold.

Since 1.1.2

enumFromTo :: (Enum a, Eq a, Monad m) => a -> a -> Producer m aSource

Enumerate from a value to a final value, inclusive, via `succ`

.

This is generally more efficient than using `Prelude`

's `enumFromTo`

and
combining with `sourceList`

since this avoids any intermediate data
structures.

Since 0.4.2

iterate :: Monad m => (a -> a) -> a -> Producer m aSource

Produces an infinite stream of repeated applications of f to x.

# Sinks

## Pure

foldMap :: (Monad m, Monoid b) => (a -> b) -> Consumer a m bSource

A monoidal strict left fold.

Since 0.5.3

take :: Monad m => Int -> Consumer a m [a]Source

Take some values from the stream and return as a list. If you want to
instead create a conduit that pipes data to another sink, see `isolate`

.
This function is semantically equivalent to:

take i = isolate i =$ consume

Since 0.3.0

drop :: Monad m => Int -> Consumer a m ()Source

Ignore a certain number of values in the stream. This function is semantically equivalent to:

drop i = take i >> return ()

However, `drop`

is more efficient as it does not need to hold values in
memory.

Since 0.3.0

head :: Monad m => Consumer a m (Maybe a)Source

Take a single value from the stream, if available.

Since 0.3.0

peek :: Monad m => Consumer a m (Maybe a)Source

Look at the next value in the stream, if available. This function will not change the state of the stream.

Since 0.3.0

consume :: Monad m => Consumer a m [a]Source

Consume all values from the stream and return as a list. Note that this will pull all values into memory. For a lazy variant, see Data.Conduit.Lazy.

Since 0.3.0

sinkNull :: Monad m => Consumer a m ()Source

Ignore the remainder of values in the source. Particularly useful when
combined with `isolate`

.

Since 0.3.0

## Monadic

foldMapM :: (Monad m, Monoid b) => (a -> m b) -> Consumer a m bSource

A monoidal strict left fold in a Monad.

Since 1.0.8

foldM :: Monad m => (b -> a -> m b) -> b -> Consumer a m bSource

A monadic strict left fold.

Since 0.3.0

mapM_ :: Monad m => (a -> m ()) -> Consumer a m ()Source

Apply the action to all values in the stream.

Since 0.3.0

# Conduits

## Pure

map :: Monad m => (a -> b) -> Conduit a m bSource

Apply a transformation to all values in a stream.

Since 0.3.0

mapMaybe :: Monad m => (a -> Maybe b) -> Conduit a m bSource

Apply a transformation that may fail to all values in a stream, discarding the failures.

Since 0.5.1

mapFoldable :: (Monad m, Foldable f) => (a -> f b) -> Conduit a m bSource

catMaybes :: Monad m => Conduit (Maybe a) m aSource

Filter the `Just`

values from a stream, discarding the `Nothing`

values.

Since 0.5.1

concatMap :: Monad m => (a -> [b]) -> Conduit a m bSource

Apply a transformation to all values in a stream, concatenating the output values.

Since 0.3.0

concatMapAccum :: Monad m => (a -> accum -> (accum, [b])) -> accum -> Conduit a m bSource

`concatMap`

with an accumulator.

Since 0.3.0

scanl :: Monad m => (a -> s -> (s, b)) -> s -> Conduit a m bSource

Deprecated: Use mapAccum instead

Deprecated synonym for `mapAccum`

Since 1.0.6

scan :: Monad m => (a -> b -> b) -> b -> ConduitM a b m bSource

Analog of `scanl`

for lists.

Since 1.1.1

mapAccum :: Monad m => (a -> s -> (s, b)) -> s -> ConduitM a b m sSource

Analog of `mapAccumL`

for lists.

Since 1.1.1

groupBy :: Monad m => (a -> a -> Bool) -> Conduit a m [a]Source

Grouping input according to an equality function.

Since 0.3.0

groupOn1 :: (Monad m, Eq b) => (a -> b) -> Conduit a m (a, [a])Source

`groupOn1`

is similar to `groupBy id`

returns a pair, indicating there are always 1 or more items in the grouping. This is designed to be converted into a NonEmpty structure but it avoids a dependency on another package

import Data.List.NonEmpty groupOn1 :: (Monad m, Eq b) => (a -> b) -> Conduit a m (NonEmpty a) groupOn1 f = CL.groupOn1 f =$= CL.map (uncurry (:|))

Since 1.1.7

isolate :: Monad m => Int -> Conduit a m aSource

Ensure that the inner sink consumes no more than the given number of
values. Note this this does *not* ensure that the sink consumes all of those
values. To get the latter behavior, combine with `sinkNull`

, e.g.:

src $$ do x <- isolate count =$ do x <- someSink sinkNull return x someOtherSink ...

Since 0.3.0

filter :: Monad m => (a -> Bool) -> Conduit a m aSource

Keep only values in the stream passing a given predicate.

Since 0.3.0

## Monadic

mapM :: Monad m => (a -> m b) -> Conduit a m bSource

Apply a monadic transformation to all values in a stream.

If you do not need the transformed values, and instead just want the monadic
side-effects of running the action, see `mapM_`

.

Since 0.3.0

iterM :: Monad m => (a -> m ()) -> Conduit a m aSource

Apply a monadic action on all values in a stream.

This `Conduit`

can be used to perform a monadic side-effect for every
value, whilst passing the value through the `Conduit`

as-is.

iterM f = mapM (\a -> f a >>= \() -> return a)

Since 0.5.6

scanlM :: Monad m => (a -> s -> m (s, b)) -> s -> Conduit a m bSource

Deprecated: Use mapAccumM instead

Deprecated synonym for `mapAccumM`

Since 1.0.6

mapAccumM :: Monad m => (a -> s -> m (s, b)) -> s -> ConduitM a b m sSource

Monadic `mapAccum`

.

Since 1.1.1

mapMaybeM :: Monad m => (a -> m (Maybe b)) -> Conduit a m bSource

Apply a monadic transformation that may fail to all values in a stream, discarding the failures.

Since 0.5.1

mapFoldableM :: (Monad m, Foldable f) => (a -> m (f b)) -> Conduit a m bSource

Monadic variant of `mapFoldable`

.

Since 1.0.6

concatMapM :: Monad m => (a -> m [b]) -> Conduit a m bSource

Apply a monadic transformation to all values in a stream, concatenating the output values.

Since 0.3.0

concatMapAccumM :: Monad m => (a -> accum -> m (accum, [b])) -> accum -> Conduit a m bSource

`concatMapM`

with an accumulator.

Since 0.3.0