| Safe Haskell | None |
|---|---|
| Language | Haskell2010 |
Core.System.Base
Description
Re-exports of Haskell base and GHC system libraries.
Synopsis
- liftIO :: MonadIO m => IO a -> m a
- class Monad m => MonadIO (m :: Type -> Type)
- data Handle
- data IOMode
- withFile :: FilePath -> IOMode -> (Handle -> IO r) -> IO r
- stdin :: Handle
- stdout :: Handle
- stderr :: Handle
- hFlush :: Handle -> IO ()
- unsafePerformIO :: IO a -> a
- class (Typeable e, Show e) => Exception e where
- toException :: e -> SomeException
- fromException :: SomeException -> Maybe e
- displayException :: e -> String
- data SomeException
Input/Output
from Control.Monad.IO.Class
Re-exported from Control.Monad.IO.Class in base:
class Monad m => MonadIO (m :: Type -> Type) #
Monads in which IO computations may be embedded.
Any monad built by applying a sequence of monad transformers to the
IO monad will be an instance of this class.
Instances should satisfy the following laws, which state that liftIO
is a transformer of monads:
Minimal complete definition
Instances
| MonadIO IO | Since: base-4.9.0.0 |
Defined in Control.Monad.IO.Class | |
| MonadIO Q | |
Defined in Language.Haskell.TH.Syntax | |
| MonadIO Sh | |
Defined in Shelly.Base | |
| MonadIO (Program τ) Source # | |
Defined in Core.Program.Context | |
| MonadIO m => MonadIO (ReaderT r m) | |
Defined in Control.Monad.Trans.Reader | |
| (Error e, MonadIO m) => MonadIO (ErrorT e m) | |
Defined in Control.Monad.Trans.Error | |
from System.IO
Re-exported from System.IO in base:
Haskell defines operations to read and write characters from and to files,
represented by values of type Handle. Each value of this type is a
handle: a record used by the Haskell run-time system to manage I/O
with file system objects. A handle has at least the following properties:
- whether it manages input or output or both;
- whether it is open, closed or semi-closed;
- whether the object is seekable;
- whether buffering is disabled, or enabled on a line or block basis;
- a buffer (whose length may be zero).
Most handles will also have a current I/O position indicating where the next
input or output operation will occur. A handle is readable if it
manages only input or both input and output; likewise, it is writable if
it manages only output or both input and output. A handle is open when
first allocated.
Once it is closed it can no longer be used for either input or output,
though an implementation cannot re-use its storage while references
remain to it. Handles are in the Show and Eq classes. The string
produced by showing a handle is system dependent; it should include
enough information to identify the handle for debugging. A handle is
equal according to == only to itself; no attempt
is made to compare the internal state of different handles for equality.
Instances
See openFile
Constructors
| ReadMode | |
| WriteMode | |
| AppendMode | |
| ReadWriteMode |
withFile :: FilePath -> IOMode -> (Handle -> IO r) -> IO r #
withFile name mode actopenFile and passes
the resulting handle to the computation act. The handle will be
closed on exit from withFile, whether by normal termination or by
raising an exception. If closing the handle raises an exception, then
this exception will be raised by withFile rather than any exception
raised by act.
The action hFlush hdl causes any items buffered for output
in handle hdl to be sent immediately to the operating system.
This operation may fail with:
isFullErrorif the device is full;isPermissionErrorif a system resource limit would be exceeded. It is unspecified whether the characters in the buffer are discarded or retained under these circumstances.
unsafePerformIO :: IO a -> a #
This is the "back door" into the IO monad, allowing
IO computation to be performed at any time. For
this to be safe, the IO computation should be
free of side effects and independent of its environment.
If the I/O computation wrapped in unsafePerformIO performs side
effects, then the relative order in which those side effects take
place (relative to the main I/O trunk, or other calls to
unsafePerformIO) is indeterminate. Furthermore, when using
unsafePerformIO to cause side-effects, you should take the following
precautions to ensure the side effects are performed as many times as
you expect them to be. Note that these precautions are necessary for
GHC, but may not be sufficient, and other compilers may require
different precautions:
- Use
{-# NOINLINE foo #-}as a pragma on any functionfoothat callsunsafePerformIO. If the call is inlined, the I/O may be performed more than once. - Use the compiler flag
-fno-cseto prevent common sub-expression elimination being performed on the module, which might combine two side effects that were meant to be separate. A good example is using multiple global variables (liketestin the example below). - Make sure that the either you switch off let-floating (
-fno-full-laziness), or that the call tounsafePerformIOcannot float outside a lambda. For example, if you say:f x = unsafePerformIO (newIORef [])you may get only one reference cell shared between all calls tof. Better would bef x = unsafePerformIO (newIORef [x])because now it can't float outside the lambda.
It is less well known that
unsafePerformIO is not type safe. For example:
test :: IORef [a]
test = unsafePerformIO $ newIORef []
main = do
writeIORef test [42]
bang <- readIORef test
print (bang :: [Char])This program will core dump. This problem with polymorphic references
is well known in the ML community, and does not arise with normal
monadic use of references. There is no easy way to make it impossible
once you use unsafePerformIO. Indeed, it is
possible to write coerce :: a -> b with the
help of unsafePerformIO. So be careful!
Exception handling
class (Typeable e, Show e) => Exception e where #
Any type that you wish to throw or catch as an exception must be an
instance of the Exception class. The simplest case is a new exception
type directly below the root:
data MyException = ThisException | ThatException
deriving Show
instance Exception MyExceptionThe default method definitions in the Exception class do what we need
in this case. You can now throw and catch ThisException and
ThatException as exceptions:
*Main> throw ThisException `catch` \e -> putStrLn ("Caught " ++ show (e :: MyException))
Caught ThisException
In more complicated examples, you may wish to define a whole hierarchy of exceptions:
---------------------------------------------------------------------
-- Make the root exception type for all the exceptions in a compiler
data SomeCompilerException = forall e . Exception e => SomeCompilerException e
instance Show SomeCompilerException where
show (SomeCompilerException e) = show e
instance Exception SomeCompilerException
compilerExceptionToException :: Exception e => e -> SomeException
compilerExceptionToException = toException . SomeCompilerException
compilerExceptionFromException :: Exception e => SomeException -> Maybe e
compilerExceptionFromException x = do
SomeCompilerException a <- fromException x
cast a
---------------------------------------------------------------------
-- Make a subhierarchy for exceptions in the frontend of the compiler
data SomeFrontendException = forall e . Exception e => SomeFrontendException e
instance Show SomeFrontendException where
show (SomeFrontendException e) = show e
instance Exception SomeFrontendException where
toException = compilerExceptionToException
fromException = compilerExceptionFromException
frontendExceptionToException :: Exception e => e -> SomeException
frontendExceptionToException = toException . SomeFrontendException
frontendExceptionFromException :: Exception e => SomeException -> Maybe e
frontendExceptionFromException x = do
SomeFrontendException a <- fromException x
cast a
---------------------------------------------------------------------
-- Make an exception type for a particular frontend compiler exception
data MismatchedParentheses = MismatchedParentheses
deriving Show
instance Exception MismatchedParentheses where
toException = frontendExceptionToException
fromException = frontendExceptionFromExceptionWe can now catch a MismatchedParentheses exception as
MismatchedParentheses, SomeFrontendException or
SomeCompilerException, but not other types, e.g. IOException:
*Main> throw MismatchedParentheses `catch` \e -> putStrLn ("Caught " ++ show (e :: MismatchedParentheses))
Caught MismatchedParentheses
*Main> throw MismatchedParentheses `catch` \e -> putStrLn ("Caught " ++ show (e :: SomeFrontendException))
Caught MismatchedParentheses
*Main> throw MismatchedParentheses `catch` \e -> putStrLn ("Caught " ++ show (e :: SomeCompilerException))
Caught MismatchedParentheses
*Main> throw MismatchedParentheses `catch` \e -> putStrLn ("Caught " ++ show (e :: IOException))
*** Exception: MismatchedParentheses
Minimal complete definition
Nothing
Methods
toException :: e -> SomeException #
fromException :: SomeException -> Maybe e #
displayException :: e -> String #
Render this exception value in a human-friendly manner.
Default implementation: show
Since: base-4.8.0.0
Instances
data SomeException #
The SomeException type is the root of the exception type hierarchy.
When an exception of type e is thrown, behind the scenes it is
encapsulated in a SomeException.
Instances
| Show SomeException | Since: base-3.0 |
Defined in GHC.Exception.Type Methods showsPrec :: Int -> SomeException -> ShowS # show :: SomeException -> String # showList :: [SomeException] -> ShowS # | |
| Exception SomeException | Since: base-3.0 |
Defined in GHC.Exception.Type Methods toException :: SomeException -> SomeException # fromException :: SomeException -> Maybe SomeException # displayException :: SomeException -> String # | |