Csound.Base

Basic types and functions.

This module re-exports everything.

WARNING (for Csound users): the maximum amplitude is 1.0. There is no way to alter it. Don't define your amplitudes with 9000 or 11000. But the good news are: all signals are clipped by 1 so that you can not damage your ears and your speakers by a little typo.

Documentation

module Csound.Types

module Csound.Control

module Csound.IO

module Csound.Air

module Csound.Tab

module Csound.Tuning

module Csound.Options

module Csound.SigSpace

Standard classes

module Data.Boolean

module Data.Default

module Data.Monoid

(<$) :: Functor f => a -> f b -> f a infixl 4

Replace all locations in the input with the same value. The default definition is fmap . const, but this may be overridden with a more efficient version.

Using ApplicativeDo: 'a <$ bs' can be understood as the do expression

do bs
   pure a

with an inferred Functor constraint.

class Functor f => Applicative (f :: Type -> Type) where

A functor with application, providing operations to

• embed pure expressions (pure), and
• sequence computations and combine their results (<*> and liftA2).

A minimal complete definition must include implementations of pure and of either <*> or liftA2. If it defines both, then they must behave the same as their default definitions:

(<*>) = liftA2 id

liftA2 f x y = f <$> x <*> y

Further, any definition must satisfy the following:

Identity

pure id <*> v = v

Composition

pure (.) <*> u <*> v <*> w = u <*> (v <*> w)

Homomorphism

pure f <*> pure x = pure (f x)

Interchange

u <*> pure y = pure ($ y) <*> u

The other methods have the following default definitions, which may be overridden with equivalent specialized implementations:

• u *> v = (id <$ u) <*> v

• u <* v = liftA2 const u v

As a consequence of these laws, the Functor instance for f will satisfy

• fmap f x = pure f <*> x

It may be useful to note that supposing

forall x y. p (q x y) = f x . g y

it follows from the above that

liftA2 p (liftA2 q u v) = liftA2 f u . liftA2 g v

If f is also a Monad, it should satisfy

• pure = return

• m1 <*> m2 = m1 >>= (x1 -> m2 >>= (x2 -> return (x1 x2)))

• (*>) = (>>)

(which implies that pure and <*> satisfy the applicative functor laws).

Minimal complete definition

pure, ((<*>) | liftA2)

Methods

pure :: a -> f a

Lift a value.

(<*>) :: f (a -> b) -> f a -> f b infixl 4

Sequential application.

A few functors support an implementation of <*> that is more efficient than the default one.

Using ApplicativeDo: 'fs <*> as' can be understood as the do expression

do f <- fs
   a <- as
   pure (f a)

liftA2 :: (a -> b -> c) -> f a -> f b -> f c

Lift a binary function to actions.

Some functors support an implementation of liftA2 that is more efficient than the default one. In particular, if fmap is an expensive operation, it is likely better to use liftA2 than to fmap over the structure and then use <*>.

This became a typeclass method in 4.10.0.0. Prior to that, it was a function defined in terms of <*> and fmap.

Using ApplicativeDo: 'liftA2 f as bs' can be understood as the do expression

do a <- as
   b <- bs
   pure (f a b)

(*>) :: f a -> f b -> f b infixl 4

Sequence actions, discarding the value of the first argument.

'as *> bs' can be understood as the do expression

do as
   bs

This is a tad complicated for our ApplicativeDo extension which will give it a Monad constraint. For an Applicative constraint we write it of the form

do _ <- as
   b <- bs
   pure b

Instances

Applicative []

Since: base-2.1

Defined in GHC.Base

Methods

pure :: a -> [a]

(<*>) :: [a -> b] -> [a] -> [b]

liftA2 :: (a -> b -> c) -> [a] -> [b] -> [c]

(*>) :: [a] -> [b] -> [b]

(<*) :: [a] -> [b] -> [a]

Applicative Maybe

Since: base-2.1

Defined in GHC.Base

Methods

pure :: a -> Maybe a

(<*>) :: Maybe (a -> b) -> Maybe a -> Maybe b

liftA2 :: (a -> b -> c) -> Maybe a -> Maybe b -> Maybe c

(*>) :: Maybe a -> Maybe b -> Maybe b

(<*) :: Maybe a -> Maybe b -> Maybe a

Applicative IO

Since: base-2.1

Defined in GHC.Base

Methods

pure :: a -> IO a

(<*>) :: IO (a -> b) -> IO a -> IO b

liftA2 :: (a -> b -> c) -> IO a -> IO b -> IO c

(*>) :: IO a -> IO b -> IO b

(<*) :: IO a -> IO b -> IO a

Applicative Par1

Since: base-4.9.0.0

Defined in GHC.Generics

Methods

pure :: a -> Par1 a

(<*>) :: Par1 (a -> b) -> Par1 a -> Par1 b

liftA2 :: (a -> b -> c) -> Par1 a -> Par1 b -> Par1 c

(*>) :: Par1 a -> Par1 b -> Par1 b

(<*) :: Par1 a -> Par1 b -> Par1 a

Applicative Q

Defined in Language.Haskell.TH.Syntax

Methods

pure :: a -> Q a

(<*>) :: Q (a -> b) -> Q a -> Q b

liftA2 :: (a -> b -> c) -> Q a -> Q b -> Q c

(*>) :: Q a -> Q b -> Q b

(<*) :: Q a -> Q b -> Q a

Applicative Complex

Since: base-4.9.0.0

Defined in Data.Complex

Methods

pure :: a -> Complex a

(<*>) :: Complex (a -> b) -> Complex a -> Complex b

liftA2 :: (a -> b -> c) -> Complex a -> Complex b -> Complex c

(*>) :: Complex a -> Complex b -> Complex b

(<*) :: Complex a -> Complex b -> Complex a

Applicative Min

Since: base-4.9.0.0

Defined in Data.Semigroup

Methods

pure :: a -> Min a

(<*>) :: Min (a -> b) -> Min a -> Min b

liftA2 :: (a -> b -> c) -> Min a -> Min b -> Min c

(*>) :: Min a -> Min b -> Min b

(<*) :: Min a -> Min b -> Min a

Applicative Max

Since: base-4.9.0.0

Defined in Data.Semigroup

Methods

pure :: a -> Max a

(<*>) :: Max (a -> b) -> Max a -> Max b

liftA2 :: (a -> b -> c) -> Max a -> Max b -> Max c

(*>) :: Max a -> Max b -> Max b

(<*) :: Max a -> Max b -> Max a

Applicative First

Since: base-4.9.0.0

Defined in Data.Semigroup

Methods

pure :: a -> First a

(<*>) :: First (a -> b) -> First a -> First b

liftA2 :: (a -> b -> c) -> First a -> First b -> First c

(*>) :: First a -> First b -> First b

(<*) :: First a -> First b -> First a

Applicative Last

Since: base-4.9.0.0

Defined in Data.Semigroup

Methods

pure :: a -> Last a

(<*>) :: Last (a -> b) -> Last a -> Last b

liftA2 :: (a -> b -> c) -> Last a -> Last b -> Last c

(*>) :: Last a -> Last b -> Last b

(<*) :: Last a -> Last b -> Last a

Applicative Option

Since: base-4.9.0.0

Defined in Data.Semigroup

Methods

pure :: a -> Option a

(<*>) :: Option (a -> b) -> Option a -> Option b

liftA2 :: (a -> b -> c) -> Option a -> Option b -> Option c

(*>) :: Option a -> Option b -> Option b

(<*) :: Option a -> Option b -> Option a

Applicative ZipList

f <$> ZipList xs1 <*> ... <*> ZipList xsN
    = ZipList (zipWithN f xs1 ... xsN)

where zipWithN refers to the zipWith function of the appropriate arity (zipWith, zipWith3, zipWith4, ...). For example:

(\a b c -> stimes c [a, b]) <$> ZipList "abcd" <*> ZipList "567" <*> ZipList [1..]
    = ZipList (zipWith3 (\a b c -> stimes c [a, b]) "abcd" "567" [1..])
    = ZipList {getZipList = ["a5","b6b6","c7c7c7"]}

Since: base-2.1

Defined in Control.Applicative

Methods

pure :: a -> ZipList a

(<*>) :: ZipList (a -> b) -> ZipList a -> ZipList b

liftA2 :: (a -> b -> c) -> ZipList a -> ZipList b -> ZipList c

(*>) :: ZipList a -> ZipList b -> ZipList b

(<*) :: ZipList a -> ZipList b -> ZipList a

Applicative Identity

Since: base-4.8.0.0

Defined in Data.Functor.Identity

Methods

pure :: a -> Identity a

(<*>) :: Identity (a -> b) -> Identity a -> Identity b

liftA2 :: (a -> b -> c) -> Identity a -> Identity b -> Identity c

(*>) :: Identity a -> Identity b -> Identity b

(<*) :: Identity a -> Identity b -> Identity a

Applicative First

Since: base-4.8.0.0

Defined in Data.Monoid

Methods

pure :: a -> First a

(<*>) :: First (a -> b) -> First a -> First b

liftA2 :: (a -> b -> c) -> First a -> First b -> First c

(*>) :: First a -> First b -> First b

(<*) :: First a -> First b -> First a

Applicative Last

Since: base-4.8.0.0

Defined in Data.Monoid

Methods

pure :: a -> Last a

(<*>) :: Last (a -> b) -> Last a -> Last b

liftA2 :: (a -> b -> c) -> Last a -> Last b -> Last c

(*>) :: Last a -> Last b -> Last b

(<*) :: Last a -> Last b -> Last a

Applicative Dual

Since: base-4.8.0.0

Defined in Data.Semigroup.Internal

Methods

pure :: a -> Dual a

(<*>) :: Dual (a -> b) -> Dual a -> Dual b

liftA2 :: (a -> b -> c) -> Dual a -> Dual b -> Dual c

(*>) :: Dual a -> Dual b -> Dual b

(<*) :: Dual a -> Dual b -> Dual a

Applicative Sum

Since: base-4.8.0.0

Defined in Data.Semigroup.Internal

Methods

pure :: a -> Sum a

(<*>) :: Sum (a -> b) -> Sum a -> Sum b

liftA2 :: (a -> b -> c) -> Sum a -> Sum b -> Sum c

(*>) :: Sum a -> Sum b -> Sum b

(<*) :: Sum a -> Sum b -> Sum a

Applicative Product

Since: base-4.8.0.0

Defined in Data.Semigroup.Internal

Methods

pure :: a -> Product a

(<*>) :: Product (a -> b) -> Product a -> Product b

liftA2 :: (a -> b -> c) -> Product a -> Product b -> Product c

(*>) :: Product a -> Product b -> Product b

(<*) :: Product a -> Product b -> Product a

Applicative Down

Since: base-4.11.0.0

Defined in Data.Ord

Methods

pure :: a -> Down a

(<*>) :: Down (a -> b) -> Down a -> Down b

liftA2 :: (a -> b -> c) -> Down a -> Down b -> Down c

(*>) :: Down a -> Down b -> Down b

(<*) :: Down a -> Down b -> Down a

Applicative ReadP

Since: base-4.6.0.0

Defined in Text.ParserCombinators.ReadP

Methods

pure :: a -> ReadP a

(<*>) :: ReadP (a -> b) -> ReadP a -> ReadP b

liftA2 :: (a -> b -> c) -> ReadP a -> ReadP b -> ReadP c

(*>) :: ReadP a -> ReadP b -> ReadP b

(<*) :: ReadP a -> ReadP b -> ReadP a

Applicative NonEmpty

Since: base-4.9.0.0

Defined in GHC.Base

Methods

pure :: a -> NonEmpty a

(<*>) :: NonEmpty (a -> b) -> NonEmpty a -> NonEmpty b

liftA2 :: (a -> b -> c) -> NonEmpty a -> NonEmpty b -> NonEmpty c

(*>) :: NonEmpty a -> NonEmpty b -> NonEmpty b

(<*) :: NonEmpty a -> NonEmpty b -> NonEmpty a

Applicative Tree

Defined in Data.Tree

Methods

pure :: a -> Tree a

(<*>) :: Tree (a -> b) -> Tree a -> Tree b

liftA2 :: (a -> b -> c) -> Tree a -> Tree b -> Tree c

(*>) :: Tree a -> Tree b -> Tree b

(<*) :: Tree a -> Tree b -> Tree a

Applicative Seq

Since: containers-0.5.4

Defined in Data.Sequence.Internal

Methods

pure :: a -> Seq a

(<*>) :: Seq (a -> b) -> Seq a -> Seq b

liftA2 :: (a -> b -> c) -> Seq a -> Seq b -> Seq c

(*>) :: Seq a -> Seq b -> Seq b

(<*) :: Seq a -> Seq b -> Seq a

Applicative SE

Defined in Csound.Typed.GlobalState.SE

Methods

pure :: a -> SE a

(<*>) :: SE (a -> b) -> SE a -> SE b

liftA2 :: (a -> b -> c) -> SE a -> SE b -> SE c

(*>) :: SE a -> SE b -> SE b

(<*) :: SE a -> SE b -> SE a

Applicative GE

Defined in Csound.Typed.GlobalState.GE

Methods

pure :: a -> GE a

(<*>) :: GE (a -> b) -> GE a -> GE b

liftA2 :: (a -> b -> c) -> GE a -> GE b -> GE c

(*>) :: GE a -> GE b -> GE b

(<*) :: GE a -> GE b -> GE a

Applicative DList

Defined in Data.DList.Internal

Methods

pure :: a -> DList a

(<*>) :: DList (a -> b) -> DList a -> DList b

liftA2 :: (a -> b -> c) -> DList a -> DList b -> DList c

(*>) :: DList a -> DList b -> DList b

(<*) :: DList a -> DList b -> DList a

Applicative P

Since: base-4.5.0.0

Defined in Text.ParserCombinators.ReadP

Methods

pure :: a -> P a

(<*>) :: P (a -> b) -> P a -> P b

liftA2 :: (a -> b -> c) -> P a -> P b -> P c

(*>) :: P a -> P b -> P b

(<*) :: P a -> P b -> P a

Applicative Cab'

Defined in Csound.Typed.Gui.Cabbage.Cabbage

Methods

pure :: a -> Cab' a

(<*>) :: Cab' (a -> b) -> Cab' a -> Cab' b

liftA2 :: (a -> b -> c) -> Cab' a -> Cab' b -> Cab' c

(*>) :: Cab' a -> Cab' b -> Cab' b

(<*) :: Cab' a -> Cab' b -> Cab' a

Applicative CabProp'

Defined in Csound.Typed.Gui.Cabbage.Cabbage

Methods

pure :: a -> CabProp' a

(<*>) :: CabProp' (a -> b) -> CabProp' a -> CabProp' b

liftA2 :: (a -> b -> c) -> CabProp' a -> CabProp' b -> CabProp' c

(*>) :: CabProp' a -> CabProp' b -> CabProp' b

(<*) :: CabProp' a -> CabProp' b -> CabProp' a

Applicative (Either e)

Since: base-3.0

Defined in Data.Either

Methods

pure :: a -> Either e a

(<*>) :: Either e (a -> b) -> Either e a -> Either e b

liftA2 :: (a -> b -> c) -> Either e a -> Either e b -> Either e c

(*>) :: Either e a -> Either e b -> Either e b

(<*) :: Either e a -> Either e b -> Either e a

Applicative (U1 :: Type -> Type)

Since: base-4.9.0.0

Defined in GHC.Generics

Methods

pure :: a -> U1 a

(<*>) :: U1 (a -> b) -> U1 a -> U1 b

liftA2 :: (a -> b -> c) -> U1 a -> U1 b -> U1 c

(*>) :: U1 a -> U1 b -> U1 b

(<*) :: U1 a -> U1 b -> U1 a

Monoid a => Applicative ((,) a)

For tuples, the Monoid constraint on a determines how the first values merge. For example, Strings concatenate:

("hello ", (+15)) <*> ("world!", 2002)
("hello world!",2017)

Since: base-2.1

Defined in GHC.Base

Methods

pure :: a0 -> (a, a0)

(<*>) :: (a, a0 -> b) -> (a, a0) -> (a, b)

liftA2 :: (a0 -> b -> c) -> (a, a0) -> (a, b) -> (a, c)

(*>) :: (a, a0) -> (a, b) -> (a, b)

(<*) :: (a, a0) -> (a, b) -> (a, a0)

Monad m => Applicative (WrappedMonad m)

Since: base-2.1

Defined in Control.Applicative

Methods

pure :: a -> WrappedMonad m a

(<*>) :: WrappedMonad m (a -> b) -> WrappedMonad m a -> WrappedMonad m b

liftA2 :: (a -> b -> c) -> WrappedMonad m a -> WrappedMonad m b -> WrappedMonad m c

(*>) :: WrappedMonad m a -> WrappedMonad m b -> WrappedMonad m b

(<*) :: WrappedMonad m a -> WrappedMonad m b -> WrappedMonad m a

Arrow a => Applicative (ArrowMonad a)

Since: base-4.6.0.0

Defined in Control.Arrow

Methods

pure :: a0 -> ArrowMonad a a0

(<*>) :: ArrowMonad a (a0 -> b) -> ArrowMonad a a0 -> ArrowMonad a b

liftA2 :: (a0 -> b -> c) -> ArrowMonad a a0 -> ArrowMonad a b -> ArrowMonad a c

(*>) :: ArrowMonad a a0 -> ArrowMonad a b -> ArrowMonad a b

(<*) :: ArrowMonad a a0 -> ArrowMonad a b -> ArrowMonad a a0

Applicative (Proxy :: Type -> Type)

Since: base-4.7.0.0

Defined in Data.Proxy

Methods

pure :: a -> Proxy a

(<*>) :: Proxy (a -> b) -> Proxy a -> Proxy b

liftA2 :: (a -> b -> c) -> Proxy a -> Proxy b -> Proxy c

(*>) :: Proxy a -> Proxy b -> Proxy b

(<*) :: Proxy a -> Proxy b -> Proxy a

Monad m => Applicative (DepT m)

Defined in Csound.Dynamic.Types.Dep

Methods

pure :: a -> DepT m a

(<*>) :: DepT m (a -> b) -> DepT m a -> DepT m b

liftA2 :: (a -> b -> c) -> DepT m a -> DepT m b -> DepT m c

(*>) :: DepT m a -> DepT m b -> DepT m b

(<*) :: DepT m a -> DepT m b -> DepT m a

Applicative (Scene ctx)

Defined in Csound.Typed.Gui.BoxModel

Methods

pure :: a -> Scene ctx a

(<*>) :: Scene ctx (a -> b) -> Scene ctx a -> Scene ctx b

liftA2 :: (a -> b -> c) -> Scene ctx a -> Scene ctx b -> Scene ctx c

(*>) :: Scene ctx a -> Scene ctx b -> Scene ctx b

(<*) :: Scene ctx a -> Scene ctx b -> Scene ctx a

Applicative f => Applicative (Rec1 f)

Since: base-4.9.0.0

Defined in GHC.Generics

Methods

pure :: a -> Rec1 f a

(<*>) :: Rec1 f (a -> b) -> Rec1 f a -> Rec1 f b

liftA2 :: (a -> b -> c) -> Rec1 f a -> Rec1 f b -> Rec1 f c

(*>) :: Rec1 f a -> Rec1 f b -> Rec1 f b

(<*) :: Rec1 f a -> Rec1 f b -> Rec1 f a

(Monoid a, Monoid b) => Applicative ((,,) a b)

Since: base-4.14.0.0

Defined in GHC.Base

Methods

pure :: a0 -> (a, b, a0)

(<*>) :: (a, b, a0 -> b0) -> (a, b, a0) -> (a, b, b0)

liftA2 :: (a0 -> b0 -> c) -> (a, b, a0) -> (a, b, b0) -> (a, b, c)

(*>) :: (a, b, a0) -> (a, b, b0) -> (a, b, b0)

(<*) :: (a, b, a0) -> (a, b, b0) -> (a, b, a0)

Arrow a => Applicative (WrappedArrow a b)

Since: base-2.1

Defined in Control.Applicative

Methods

pure :: a0 -> WrappedArrow a b a0

(<*>) :: WrappedArrow a b (a0 -> b0) -> WrappedArrow a b a0 -> WrappedArrow a b b0

liftA2 :: (a0 -> b0 -> c) -> WrappedArrow a b a0 -> WrappedArrow a b b0 -> WrappedArrow a b c

(*>) :: WrappedArrow a b a0 -> WrappedArrow a b b0 -> WrappedArrow a b b0

(<*) :: WrappedArrow a b a0 -> WrappedArrow a b b0 -> WrappedArrow a b a0

Applicative m => Applicative (Kleisli m a)

Since: base-4.14.0.0

Defined in Control.Arrow

Methods

pure :: a0 -> Kleisli m a a0

(<*>) :: Kleisli m a (a0 -> b) -> Kleisli m a a0 -> Kleisli m a b

liftA2 :: (a0 -> b -> c) -> Kleisli m a a0 -> Kleisli m a b -> Kleisli m a c

(*>) :: Kleisli m a a0 -> Kleisli m a b -> Kleisli m a b

(<*) :: Kleisli m a a0 -> Kleisli m a b -> Kleisli m a a0

Monoid m => Applicative (Const m :: Type -> Type)

Since: base-2.0.1

Defined in Data.Functor.Const

Methods

pure :: a -> Const m a

(<*>) :: Const m (a -> b) -> Const m a -> Const m b

liftA2 :: (a -> b -> c) -> Const m a -> Const m b -> Const m c

(*>) :: Const m a -> Const m b -> Const m b

(<*) :: Const m a -> Const m b -> Const m a

Applicative f => Applicative (Ap f)

Since: base-4.12.0.0

Defined in Data.Monoid

Methods

pure :: a -> Ap f a

(<*>) :: Ap f (a -> b) -> Ap f a -> Ap f b

liftA2 :: (a -> b -> c) -> Ap f a -> Ap f b -> Ap f c

(*>) :: Ap f a -> Ap f b -> Ap f b

(<*) :: Ap f a -> Ap f b -> Ap f a

Applicative f => Applicative (Alt f)

Since: base-4.8.0.0

Defined in Data.Semigroup.Internal

Methods

pure :: a -> Alt f a

(<*>) :: Alt f (a -> b) -> Alt f a -> Alt f b

liftA2 :: (a -> b -> c) -> Alt f a -> Alt f b -> Alt f c

(*>) :: Alt f a -> Alt f b -> Alt f b

(<*) :: Alt f a -> Alt f b -> Alt f a

(Applicative f, Monad f) => Applicative (WhenMissing f x)

Equivalent to ReaderT k (ReaderT x (MaybeT f)).

Since: containers-0.5.9

Defined in Data.IntMap.Internal

Methods

pure :: a -> WhenMissing f x a

(<*>) :: WhenMissing f x (a -> b) -> WhenMissing f x a -> WhenMissing f x b

liftA2 :: (a -> b -> c) -> WhenMissing f x a -> WhenMissing f x b -> WhenMissing f x c

(*>) :: WhenMissing f x a -> WhenMissing f x b -> WhenMissing f x b

(<*) :: WhenMissing f x a -> WhenMissing f x b -> WhenMissing f x a

(Functor m, Monad m) => Applicative (StateT s m)

Defined in Control.Monad.Trans.State.Strict

Methods

pure :: a -> StateT s m a

(<*>) :: StateT s m (a -> b) -> StateT s m a -> StateT s m b

liftA2 :: (a -> b -> c) -> StateT s m a -> StateT s m b -> StateT s m c

(*>) :: StateT s m a -> StateT s m b -> StateT s m b

(<*) :: StateT s m a -> StateT s m b -> StateT s m a

Applicative m => Applicative (ReaderT r m)

Defined in Control.Monad.Trans.Reader

Methods

pure :: a -> ReaderT r m a

(<*>) :: ReaderT r m (a -> b) -> ReaderT r m a -> ReaderT r m b

liftA2 :: (a -> b -> c) -> ReaderT r m a -> ReaderT r m b -> ReaderT r m c

(*>) :: ReaderT r m a -> ReaderT r m b -> ReaderT r m b

(<*) :: ReaderT r m a -> ReaderT r m b -> ReaderT r m a

Applicative ((->) r :: Type -> Type)

Since: base-2.1

Defined in GHC.Base

Methods

pure :: a -> r -> a

(<*>) :: (r -> (a -> b)) -> (r -> a) -> r -> b

liftA2 :: (a -> b -> c) -> (r -> a) -> (r -> b) -> r -> c

(*>) :: (r -> a) -> (r -> b) -> r -> b

(<*) :: (r -> a) -> (r -> b) -> r -> a

Monoid c => Applicative (K1 i c :: Type -> Type)

Since: base-4.12.0.0

Defined in GHC.Generics

Methods

pure :: a -> K1 i c a

(<*>) :: K1 i c (a -> b) -> K1 i c a -> K1 i c b

liftA2 :: (a -> b -> c0) -> K1 i c a -> K1 i c b -> K1 i c c0

(*>) :: K1 i c a -> K1 i c b -> K1 i c b

(<*) :: K1 i c a -> K1 i c b -> K1 i c a

(Applicative f, Applicative g) => Applicative (f :*: g)

Since: base-4.9.0.0

Defined in GHC.Generics

Methods

pure :: a -> (f :*: g) a

(<*>) :: (f :*: g) (a -> b) -> (f :*: g) a -> (f :*: g) b

liftA2 :: (a -> b -> c) -> (f :*: g) a -> (f :*: g) b -> (f :*: g) c

(*>) :: (f :*: g) a -> (f :*: g) b -> (f :*: g) b

(<*) :: (f :*: g) a -> (f :*: g) b -> (f :*: g) a

(Monoid a, Monoid b, Monoid c) => Applicative ((,,,) a b c)

Since: base-4.14.0.0

Defined in GHC.Base

Methods

pure :: a0 -> (a, b, c, a0)

(<*>) :: (a, b, c, a0 -> b0) -> (a, b, c, a0) -> (a, b, c, b0)

liftA2 :: (a0 -> b0 -> c0) -> (a, b, c, a0) -> (a, b, c, b0) -> (a, b, c, c0)

(*>) :: (a, b, c, a0) -> (a, b, c, b0) -> (a, b, c, b0)

(<*) :: (a, b, c, a0) -> (a, b, c, b0) -> (a, b, c, a0)

(Applicative f, Applicative g) => Applicative (Product f g)

Since: base-4.9.0.0

Defined in Data.Functor.Product

Methods

pure :: a -> Product f g a

(<*>) :: Product f g (a -> b) -> Product f g a -> Product f g b

liftA2 :: (a -> b -> c) -> Product f g a -> Product f g b -> Product f g c

(*>) :: Product f g a -> Product f g b -> Product f g b

(<*) :: Product f g a -> Product f g b -> Product f g a

(Monad f, Applicative f) => Applicative (WhenMatched f x y)

Equivalent to ReaderT Key (ReaderT x (ReaderT y (MaybeT f)))

Since: containers-0.5.9

Defined in Data.IntMap.Internal

Methods

pure :: a -> WhenMatched f x y a

(<*>) :: WhenMatched f x y (a -> b) -> WhenMatched f x y a -> WhenMatched f x y b

liftA2 :: (a -> b -> c) -> WhenMatched f x y a -> WhenMatched f x y b -> WhenMatched f x y c

(*>) :: WhenMatched f x y a -> WhenMatched f x y b -> WhenMatched f x y b

(<*) :: WhenMatched f x y a -> WhenMatched f x y b -> WhenMatched f x y a

(Applicative f, Monad f) => Applicative (WhenMissing f k x)

Equivalent to ReaderT k (ReaderT x (MaybeT f)) .

Since: containers-0.5.9

Defined in Data.Map.Internal

Methods

pure :: a -> WhenMissing f k x a

(<*>) :: WhenMissing f k x (a -> b) -> WhenMissing f k x a -> WhenMissing f k x b

liftA2 :: (a -> b -> c) -> WhenMissing f k x a -> WhenMissing f k x b -> WhenMissing f k x c

(*>) :: WhenMissing f k x a -> WhenMissing f k x b -> WhenMissing f k x b

(<*) :: WhenMissing f k x a -> WhenMissing f k x b -> WhenMissing f k x a

Applicative f => Applicative (M1 i c f)

Since: base-4.9.0.0

Defined in GHC.Generics

Methods

pure :: a -> M1 i c f a

(<*>) :: M1 i c f (a -> b) -> M1 i c f a -> M1 i c f b

liftA2 :: (a -> b -> c0) -> M1 i c f a -> M1 i c f b -> M1 i c f c0

(*>) :: M1 i c f a -> M1 i c f b -> M1 i c f b

(<*) :: M1 i c f a -> M1 i c f b -> M1 i c f a

(Applicative f, Applicative g) => Applicative (f :.: g)

Since: base-4.9.0.0

Defined in GHC.Generics

Methods

pure :: a -> (f :.: g) a

(<*>) :: (f :.: g) (a -> b) -> (f :.: g) a -> (f :.: g) b

liftA2 :: (a -> b -> c) -> (f :.: g) a -> (f :.: g) b -> (f :.: g) c

(*>) :: (f :.: g) a -> (f :.: g) b -> (f :.: g) b

(<*) :: (f :.: g) a -> (f :.: g) b -> (f :.: g) a

(Applicative f, Applicative g) => Applicative (Compose f g)

Since: base-4.9.0.0

Defined in Data.Functor.Compose

Methods

pure :: a -> Compose f g a

(<*>) :: Compose f g (a -> b) -> Compose f g a -> Compose f g b

liftA2 :: (a -> b -> c) -> Compose f g a -> Compose f g b -> Compose f g c

(*>) :: Compose f g a -> Compose f g b -> Compose f g b

(<*) :: Compose f g a -> Compose f g b -> Compose f g a

(Monad f, Applicative f) => Applicative (WhenMatched f k x y)

Equivalent to ReaderT k (ReaderT x (ReaderT y (MaybeT f)))

Since: containers-0.5.9

Defined in Data.Map.Internal

Methods

pure :: a -> WhenMatched f k x y a

(<*>) :: WhenMatched f k x y (a -> b) -> WhenMatched f k x y a -> WhenMatched f k x y b

liftA2 :: (a -> b -> c) -> WhenMatched f k x y a -> WhenMatched f k x y b -> WhenMatched f k x y c

(*>) :: WhenMatched f k x y a -> WhenMatched f k x y b -> WhenMatched f k x y b

(<*) :: WhenMatched f k x y a -> WhenMatched f k x y b -> WhenMatched f k x y a

optional :: Alternative f => f a -> f (Maybe a)

One or none.

newtype WrappedMonad (m :: Type -> Type) a

Constructors

WrapMonad

Fields

• unwrapMonad :: m a

Instances

Monad m => Monad (WrappedMonad m)

Since: base-4.7.0.0

Defined in Control.Applicative

Methods

(>>=) :: WrappedMonad m a -> (a -> WrappedMonad m b) -> WrappedMonad m b

(>>) :: WrappedMonad m a -> WrappedMonad m b -> WrappedMonad m b

return :: a -> WrappedMonad m a

Monad m => Functor (WrappedMonad m)

Since: base-2.1

Defined in Control.Applicative

Methods

fmap :: (a -> b) -> WrappedMonad m a -> WrappedMonad m b

(<$) :: a -> WrappedMonad m b -> WrappedMonad m a

Monad m => Applicative (WrappedMonad m)

Since: base-2.1

Defined in Control.Applicative

Methods

pure :: a -> WrappedMonad m a

(<*>) :: WrappedMonad m (a -> b) -> WrappedMonad m a -> WrappedMonad m b

liftA2 :: (a -> b -> c) -> WrappedMonad m a -> WrappedMonad m b -> WrappedMonad m c

(*>) :: WrappedMonad m a -> WrappedMonad m b -> WrappedMonad m b

(<*) :: WrappedMonad m a -> WrappedMonad m b -> WrappedMonad m a

MonadPlus m => Alternative (WrappedMonad m)

Since: base-2.1

Defined in Control.Applicative

Methods

empty :: WrappedMonad m a

(<|>) :: WrappedMonad m a -> WrappedMonad m a -> WrappedMonad m a

some :: WrappedMonad m a -> WrappedMonad m [a]

many :: WrappedMonad m a -> WrappedMonad m [a]

Generic1 (WrappedMonad m :: Type -> Type)

Since: base-4.7.0.0

Defined in Control.Applicative

Associated Types

type Rep1 (WrappedMonad m) :: k -> Type

Methods

from1 :: forall (a :: k). WrappedMonad m a -> Rep1 (WrappedMonad m) a

to1 :: forall (a :: k). Rep1 (WrappedMonad m) a -> WrappedMonad m a

Generic (WrappedMonad m a)

Since: base-4.7.0.0

Defined in Control.Applicative

Associated Types

type Rep (WrappedMonad m a) :: Type -> Type

Methods

from :: WrappedMonad m a -> Rep (WrappedMonad m a) x

to :: Rep (WrappedMonad m a) x -> WrappedMonad m a

type Rep1 (WrappedMonad m :: Type -> Type)

Defined in Control.Applicative

type Rep1 (WrappedMonad m :: Type -> Type) = D1 ('MetaData "WrappedMonad" "Control.Applicative" "base" 'True) (C1 ('MetaCons "WrapMonad" 'PrefixI 'True) (S1 ('MetaSel ('Just "unwrapMonad") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedLazy) (Rec1 m)))

type Rep (WrappedMonad m a)

Defined in Control.Applicative

type Rep (WrappedMonad m a) = D1 ('MetaData "WrappedMonad" "Control.Applicative" "base" 'True) (C1 ('MetaCons "WrapMonad" 'PrefixI 'True) (S1 ('MetaSel ('Just "unwrapMonad") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedLazy) (Rec0 (m a))))

newtype WrappedArrow (a :: Type -> Type -> Type) b c

Constructors

WrapArrow

Fields

• unwrapArrow :: a b c

Instances

Generic1 (WrappedArrow a b :: Type -> Type)

Since: base-4.7.0.0

Defined in Control.Applicative

Associated Types

type Rep1 (WrappedArrow a b) :: k -> Type

Methods

from1 :: forall (a0 :: k). WrappedArrow a b a0 -> Rep1 (WrappedArrow a b) a0

to1 :: forall (a0 :: k). Rep1 (WrappedArrow a b) a0 -> WrappedArrow a b a0

Arrow a => Functor (WrappedArrow a b)

Since: base-2.1

Defined in Control.Applicative

Methods

fmap :: (a0 -> b0) -> WrappedArrow a b a0 -> WrappedArrow a b b0

(<$) :: a0 -> WrappedArrow a b b0 -> WrappedArrow a b a0

Arrow a => Applicative (WrappedArrow a b)

Since: base-2.1

Defined in Control.Applicative

Methods

pure :: a0 -> WrappedArrow a b a0

(<*>) :: WrappedArrow a b (a0 -> b0) -> WrappedArrow a b a0 -> WrappedArrow a b b0

liftA2 :: (a0 -> b0 -> c) -> WrappedArrow a b a0 -> WrappedArrow a b b0 -> WrappedArrow a b c

(*>) :: WrappedArrow a b a0 -> WrappedArrow a b b0 -> WrappedArrow a b b0

(<*) :: WrappedArrow a b a0 -> WrappedArrow a b b0 -> WrappedArrow a b a0

(ArrowZero a, ArrowPlus a) => Alternative (WrappedArrow a b)

Since: base-2.1

Defined in Control.Applicative

Methods

empty :: WrappedArrow a b a0

(<|>) :: WrappedArrow a b a0 -> WrappedArrow a b a0 -> WrappedArrow a b a0

some :: WrappedArrow a b a0 -> WrappedArrow a b [a0]

many :: WrappedArrow a b a0 -> WrappedArrow a b [a0]

Generic (WrappedArrow a b c)

Since: base-4.7.0.0

Defined in Control.Applicative

Associated Types

type Rep (WrappedArrow a b c) :: Type -> Type

Methods

from :: WrappedArrow a b c -> Rep (WrappedArrow a b c) x

to :: Rep (WrappedArrow a b c) x -> WrappedArrow a b c

type Rep1 (WrappedArrow a b :: Type -> Type)

Defined in Control.Applicative

type Rep1 (WrappedArrow a b :: Type -> Type) = D1 ('MetaData "WrappedArrow" "Control.Applicative" "base" 'True) (C1 ('MetaCons "WrapArrow" 'PrefixI 'True) (S1 ('MetaSel ('Just "unwrapArrow") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedLazy) (Rec1 (a b))))

type Rep (WrappedArrow a b c)

Defined in Control.Applicative

type Rep (WrappedArrow a b c) = D1 ('MetaData "WrappedArrow" "Control.Applicative" "base" 'True) (C1 ('MetaCons "WrapArrow" 'PrefixI 'True) (S1 ('MetaSel ('Just "unwrapArrow") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedLazy) (Rec0 (a b c))))

newtype ZipList a

Lists, but with an Applicative functor based on zipping.

Constructors

ZipList

Fields

• getZipList :: [a]

Instances

Functor ZipList

Since: base-2.1

Defined in Control.Applicative

Methods

fmap :: (a -> b) -> ZipList a -> ZipList b

(<$) :: a -> ZipList b -> ZipList a

Applicative ZipList

f <$> ZipList xs1 <*> ... <*> ZipList xsN
    = ZipList (zipWithN f xs1 ... xsN)

where zipWithN refers to the zipWith function of the appropriate arity (zipWith, zipWith3, zipWith4, ...). For example:

(\a b c -> stimes c [a, b]) <$> ZipList "abcd" <*> ZipList "567" <*> ZipList [1..]
    = ZipList (zipWith3 (\a b c -> stimes c [a, b]) "abcd" "567" [1..])
    = ZipList {getZipList = ["a5","b6b6","c7c7c7"]}

Since: base-2.1

Defined in Control.Applicative

Methods

pure :: a -> ZipList a

(<*>) :: ZipList (a -> b) -> ZipList a -> ZipList b

liftA2 :: (a -> b -> c) -> ZipList a -> ZipList b -> ZipList c

(*>) :: ZipList a -> ZipList b -> ZipList b

(<*) :: ZipList a -> ZipList b -> ZipList a

Foldable ZipList

Since: base-4.9.0.0

Defined in Control.Applicative

Methods

fold :: Monoid m => ZipList m -> m

foldMap :: Monoid m => (a -> m) -> ZipList a -> m

foldMap' :: Monoid m => (a -> m) -> ZipList a -> m

foldr :: (a -> b -> b) -> b -> ZipList a -> b

foldr' :: (a -> b -> b) -> b -> ZipList a -> b

foldl :: (b -> a -> b) -> b -> ZipList a -> b

foldl' :: (b -> a -> b) -> b -> ZipList a -> b

foldr1 :: (a -> a -> a) -> ZipList a -> a

foldl1 :: (a -> a -> a) -> ZipList a -> a

toList :: ZipList a -> [a]

null :: ZipList a -> Bool

length :: ZipList a -> Int

elem :: Eq a => a -> ZipList a -> Bool

maximum :: Ord a => ZipList a -> a

minimum :: Ord a => ZipList a -> a

sum :: Num a => ZipList a -> a

product :: Num a => ZipList a -> a

Traversable ZipList

Since: base-4.9.0.0

Defined in Data.Traversable

Methods

traverse :: Applicative f => (a -> f b) -> ZipList a -> f (ZipList b)

sequenceA :: Applicative f => ZipList (f a) -> f (ZipList a)

mapM :: Monad m => (a -> m b) -> ZipList a -> m (ZipList b)

sequence :: Monad m => ZipList (m a) -> m (ZipList a)

Alternative ZipList

Since: base-4.11.0.0

Defined in Control.Applicative

Methods

empty :: ZipList a

(<|>) :: ZipList a -> ZipList a -> ZipList a

some :: ZipList a -> ZipList [a]

many :: ZipList a -> ZipList [a]

IsList (ZipList a)

Since: base-4.15.0.0

Defined in GHC.Exts

Associated Types

type Item (ZipList a)

Methods

fromList :: [Item (ZipList a)] -> ZipList a

fromListN :: Int -> [Item (ZipList a)] -> ZipList a

toList :: ZipList a -> [Item (ZipList a)]

Eq a => Eq (ZipList a)

Since: base-4.7.0.0

Defined in Control.Applicative

Methods

(==) :: ZipList a -> ZipList a -> Bool

(/=) :: ZipList a -> ZipList a -> Bool

Ord a => Ord (ZipList a)

Since: base-4.7.0.0

Defined in Control.Applicative

Methods

compare :: ZipList a -> ZipList a -> Ordering

(<) :: ZipList a -> ZipList a -> Bool

(<=) :: ZipList a -> ZipList a -> Bool

(>) :: ZipList a -> ZipList a -> Bool

(>=) :: ZipList a -> ZipList a -> Bool

max :: ZipList a -> ZipList a -> ZipList a

min :: ZipList a -> ZipList a -> ZipList a

Read a => Read (ZipList a)

Since: base-4.7.0.0

Defined in Control.Applicative

Methods

readsPrec :: Int -> ReadS (ZipList a)

readList :: ReadS [ZipList a]

readPrec :: ReadPrec (ZipList a)

readListPrec :: ReadPrec [ZipList a]

Show a => Show (ZipList a)

Since: base-4.7.0.0

Defined in Control.Applicative

Methods

showsPrec :: Int -> ZipList a -> ShowS

show :: ZipList a -> String

showList :: [ZipList a] -> ShowS

Generic (ZipList a)

Since: base-4.7.0.0

Defined in Control.Applicative

Associated Types

type Rep (ZipList a) :: Type -> Type

Methods

from :: ZipList a -> Rep (ZipList a) x

to :: Rep (ZipList a) x -> ZipList a

Generic1 ZipList

Since: base-4.7.0.0

Defined in Control.Applicative

Associated Types

type Rep1 ZipList :: k -> Type

Methods

from1 :: forall (a :: k). ZipList a -> Rep1 ZipList a

to1 :: forall (a :: k). Rep1 ZipList a -> ZipList a

type Rep (ZipList a)

Defined in Control.Applicative

type Rep (ZipList a) = D1 ('MetaData "ZipList" "Control.Applicative" "base" 'True) (C1 ('MetaCons "ZipList" 'PrefixI 'True) (S1 ('MetaSel ('Just "getZipList") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedLazy) (Rec0 [a])))

type Item (ZipList a)

Defined in GHC.Exts

type Item (ZipList a) = a

type Rep1 ZipList

Defined in Control.Applicative

type Rep1 ZipList = D1 ('MetaData "ZipList" "Control.Applicative" "base" 'True) (C1 ('MetaCons "ZipList" 'PrefixI 'True) (S1 ('MetaSel ('Just "getZipList") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedLazy) (Rec1 [])))

newtype Const a (b :: k)

The Const functor.

Constructors

Const

Fields

• getConst :: a

Instances

Generic1 (Const a :: k -> Type)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Associated Types

type Rep1 (Const a) :: k -> Type

Methods

from1 :: forall (a0 :: k0). Const a a0 -> Rep1 (Const a) a0

to1 :: forall (a0 :: k0). Rep1 (Const a) a0 -> Const a a0

Eq2 (Const :: Type -> Type -> Type)

Since: base-4.9.0.0

Defined in Data.Functor.Classes

Methods

liftEq2 :: (a -> b -> Bool) -> (c -> d -> Bool) -> Const a c -> Const b d -> Bool

Ord2 (Const :: Type -> Type -> Type)

Since: base-4.9.0.0

Defined in Data.Functor.Classes

Methods

liftCompare2 :: (a -> b -> Ordering) -> (c -> d -> Ordering) -> Const a c -> Const b d -> Ordering

Read2 (Const :: Type -> Type -> Type)

Since: base-4.9.0.0

Defined in Data.Functor.Classes

Methods

liftReadsPrec2 :: (Int -> ReadS a) -> ReadS [a] -> (Int -> ReadS b) -> ReadS [b] -> Int -> ReadS (Const a b)

liftReadList2 :: (Int -> ReadS a) -> ReadS [a] -> (Int -> ReadS b) -> ReadS [b] -> ReadS [Const a b]

liftReadPrec2 :: ReadPrec a -> ReadPrec [a] -> ReadPrec b -> ReadPrec [b] -> ReadPrec (Const a b)

liftReadListPrec2 :: ReadPrec a -> ReadPrec [a] -> ReadPrec b -> ReadPrec [b] -> ReadPrec [Const a b]

Show2 (Const :: Type -> Type -> Type)

Since: base-4.9.0.0

Defined in Data.Functor.Classes

Methods

liftShowsPrec2 :: (Int -> a -> ShowS) -> ([a] -> ShowS) -> (Int -> b -> ShowS) -> ([b] -> ShowS) -> Int -> Const a b -> ShowS

liftShowList2 :: (Int -> a -> ShowS) -> ([a] -> ShowS) -> (Int -> b -> ShowS) -> ([b] -> ShowS) -> [Const a b] -> ShowS

Hashable2 (Const :: Type -> Type -> Type)

Defined in Data.Hashable.Class

Methods

liftHashWithSalt2 :: (Int -> a -> Int) -> (Int -> b -> Int) -> Int -> Const a b -> Int

Functor (Const m :: Type -> Type)

Since: base-2.1

Defined in Data.Functor.Const

Methods

fmap :: (a -> b) -> Const m a -> Const m b

(<$) :: a -> Const m b -> Const m a

Monoid m => Applicative (Const m :: Type -> Type)

Since: base-2.0.1

Defined in Data.Functor.Const

Methods

pure :: a -> Const m a

(<*>) :: Const m (a -> b) -> Const m a -> Const m b

liftA2 :: (a -> b -> c) -> Const m a -> Const m b -> Const m c

(*>) :: Const m a -> Const m b -> Const m b

(<*) :: Const m a -> Const m b -> Const m a

Foldable (Const m :: Type -> Type)

Since: base-4.7.0.0

Defined in Data.Functor.Const

Methods

fold :: Monoid m0 => Const m m0 -> m0

foldMap :: Monoid m0 => (a -> m0) -> Const m a -> m0

foldMap' :: Monoid m0 => (a -> m0) -> Const m a -> m0

foldr :: (a -> b -> b) -> b -> Const m a -> b

foldr' :: (a -> b -> b) -> b -> Const m a -> b

foldl :: (b -> a -> b) -> b -> Const m a -> b

foldl' :: (b -> a -> b) -> b -> Const m a -> b

foldr1 :: (a -> a -> a) -> Const m a -> a

foldl1 :: (a -> a -> a) -> Const m a -> a

toList :: Const m a -> [a]

null :: Const m a -> Bool

length :: Const m a -> Int

elem :: Eq a => a -> Const m a -> Bool

maximum :: Ord a => Const m a -> a

minimum :: Ord a => Const m a -> a

sum :: Num a => Const m a -> a

product :: Num a => Const m a -> a

Traversable (Const m :: Type -> Type)

Since: base-4.7.0.0

Defined in Data.Traversable

Methods

traverse :: Applicative f => (a -> f b) -> Const m a -> f (Const m b)

sequenceA :: Applicative f => Const m (f a) -> f (Const m a)

mapM :: Monad m0 => (a -> m0 b) -> Const m a -> m0 (Const m b)

sequence :: Monad m0 => Const m (m0 a) -> m0 (Const m a)

Eq a => Eq1 (Const a :: Type -> Type)

Since: base-4.9.0.0

Defined in Data.Functor.Classes

Methods

liftEq :: (a0 -> b -> Bool) -> Const a a0 -> Const a b -> Bool

Ord a => Ord1 (Const a :: Type -> Type)

Since: base-4.9.0.0

Defined in Data.Functor.Classes

Methods

liftCompare :: (a0 -> b -> Ordering) -> Const a a0 -> Const a b -> Ordering

Read a => Read1 (Const a :: Type -> Type)

Since: base-4.9.0.0

Defined in Data.Functor.Classes

Methods

liftReadsPrec :: (Int -> ReadS a0) -> ReadS [a0] -> Int -> ReadS (Const a a0)

liftReadList :: (Int -> ReadS a0) -> ReadS [a0] -> ReadS [Const a a0]

liftReadPrec :: ReadPrec a0 -> ReadPrec [a0] -> ReadPrec (Const a a0)

liftReadListPrec :: ReadPrec a0 -> ReadPrec [a0] -> ReadPrec [Const a a0]

Show a => Show1 (Const a :: Type -> Type)

Since: base-4.9.0.0

Defined in Data.Functor.Classes

Methods

liftShowsPrec :: (Int -> a0 -> ShowS) -> ([a0] -> ShowS) -> Int -> Const a a0 -> ShowS

liftShowList :: (Int -> a0 -> ShowS) -> ([a0] -> ShowS) -> [Const a a0] -> ShowS

Hashable a => Hashable1 (Const a :: Type -> Type)

Defined in Data.Hashable.Class

Methods

liftHashWithSalt :: (Int -> a0 -> Int) -> Int -> Const a a0 -> Int

Bounded a => Bounded (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

minBound :: Const a b

maxBound :: Const a b

Enum a => Enum (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

succ :: Const a b -> Const a b

pred :: Const a b -> Const a b

toEnum :: Int -> Const a b

fromEnum :: Const a b -> Int

enumFrom :: Const a b -> [Const a b]

enumFromThen :: Const a b -> Const a b -> [Const a b]

enumFromTo :: Const a b -> Const a b -> [Const a b]

enumFromThenTo :: Const a b -> Const a b -> Const a b -> [Const a b]

Eq a => Eq (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

(==) :: Const a b -> Const a b -> Bool

(/=) :: Const a b -> Const a b -> Bool

Floating a => Floating (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

pi :: Const a b

exp :: Const a b -> Const a b

log :: Const a b -> Const a b

sqrt :: Const a b -> Const a b

(**) :: Const a b -> Const a b -> Const a b

logBase :: Const a b -> Const a b -> Const a b

sin :: Const a b -> Const a b

cos :: Const a b -> Const a b

tan :: Const a b -> Const a b

asin :: Const a b -> Const a b

acos :: Const a b -> Const a b

atan :: Const a b -> Const a b

sinh :: Const a b -> Const a b

cosh :: Const a b -> Const a b

tanh :: Const a b -> Const a b

asinh :: Const a b -> Const a b

acosh :: Const a b -> Const a b

atanh :: Const a b -> Const a b

log1p :: Const a b -> Const a b

expm1 :: Const a b -> Const a b

log1pexp :: Const a b -> Const a b

log1mexp :: Const a b -> Const a b

Fractional a => Fractional (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

(/) :: Const a b -> Const a b -> Const a b

recip :: Const a b -> Const a b

fromRational :: Rational -> Const a b

Integral a => Integral (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

quot :: Const a b -> Const a b -> Const a b

rem :: Const a b -> Const a b -> Const a b

div :: Const a b -> Const a b -> Const a b

mod :: Const a b -> Const a b -> Const a b

quotRem :: Const a b -> Const a b -> (Const a b, Const a b)

divMod :: Const a b -> Const a b -> (Const a b, Const a b)

toInteger :: Const a b -> Integer

Num a => Num (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

(+) :: Const a b -> Const a b -> Const a b

(-) :: Const a b -> Const a b -> Const a b

(*) :: Const a b -> Const a b -> Const a b

negate :: Const a b -> Const a b

abs :: Const a b -> Const a b

signum :: Const a b -> Const a b

fromInteger :: Integer -> Const a b

Ord a => Ord (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

compare :: Const a b -> Const a b -> Ordering

(<) :: Const a b -> Const a b -> Bool

(<=) :: Const a b -> Const a b -> Bool

(>) :: Const a b -> Const a b -> Bool

(>=) :: Const a b -> Const a b -> Bool

max :: Const a b -> Const a b -> Const a b

min :: Const a b -> Const a b -> Const a b

Read a => Read (Const a b)

This instance would be equivalent to the derived instances of the Const newtype if the getConst field were removed

Since: base-4.8.0.0

Defined in Data.Functor.Const

Methods

readsPrec :: Int -> ReadS (Const a b)

readList :: ReadS [Const a b]

readPrec :: ReadPrec (Const a b)

readListPrec :: ReadPrec [Const a b]

Real a => Real (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

toRational :: Const a b -> Rational

RealFloat a => RealFloat (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

floatRadix :: Const a b -> Integer

floatDigits :: Const a b -> Int

floatRange :: Const a b -> (Int, Int)

decodeFloat :: Const a b -> (Integer, Int)

encodeFloat :: Integer -> Int -> Const a b

exponent :: Const a b -> Int

significand :: Const a b -> Const a b

scaleFloat :: Int -> Const a b -> Const a b

isNaN :: Const a b -> Bool

isInfinite :: Const a b -> Bool

isDenormalized :: Const a b -> Bool

isNegativeZero :: Const a b -> Bool

isIEEE :: Const a b -> Bool

atan2 :: Const a b -> Const a b -> Const a b

RealFrac a => RealFrac (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

properFraction :: Integral b0 => Const a b -> (b0, Const a b)

truncate :: Integral b0 => Const a b -> b0

round :: Integral b0 => Const a b -> b0

ceiling :: Integral b0 => Const a b -> b0

floor :: Integral b0 => Const a b -> b0

Show a => Show (Const a b)

This instance would be equivalent to the derived instances of the Const newtype if the getConst field were removed

Since: base-4.8.0.0

Defined in Data.Functor.Const

Methods

showsPrec :: Int -> Const a b -> ShowS

show :: Const a b -> String

showList :: [Const a b] -> ShowS

Ix a => Ix (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

range :: (Const a b, Const a b) -> [Const a b]

index :: (Const a b, Const a b) -> Const a b -> Int

unsafeIndex :: (Const a b, Const a b) -> Const a b -> Int

inRange :: (Const a b, Const a b) -> Const a b -> Bool

rangeSize :: (Const a b, Const a b) -> Int

unsafeRangeSize :: (Const a b, Const a b) -> Int

Generic (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Associated Types

type Rep (Const a b) :: Type -> Type

Methods

from :: Const a b -> Rep (Const a b) x

to :: Rep (Const a b) x -> Const a b

Semigroup a => Semigroup (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

(<>) :: Const a b -> Const a b -> Const a b

sconcat :: NonEmpty (Const a b) -> Const a b

stimes :: Integral b0 => b0 -> Const a b -> Const a b

Monoid a => Monoid (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

mempty :: Const a b

mappend :: Const a b -> Const a b -> Const a b

mconcat :: [Const a b] -> Const a b

Storable a => Storable (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

sizeOf :: Const a b -> Int

alignment :: Const a b -> Int

peekElemOff :: Ptr (Const a b) -> Int -> IO (Const a b)

pokeElemOff :: Ptr (Const a b) -> Int -> Const a b -> IO ()

peekByteOff :: Ptr b0 -> Int -> IO (Const a b)

pokeByteOff :: Ptr b0 -> Int -> Const a b -> IO ()

peek :: Ptr (Const a b) -> IO (Const a b)

poke :: Ptr (Const a b) -> Const a b -> IO ()

Bits a => Bits (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

(.&.) :: Const a b -> Const a b -> Const a b

(.|.) :: Const a b -> Const a b -> Const a b

xor :: Const a b -> Const a b -> Const a b

complement :: Const a b -> Const a b

shift :: Const a b -> Int -> Const a b

rotate :: Const a b -> Int -> Const a b

zeroBits :: Const a b

bit :: Int -> Const a b

setBit :: Const a b -> Int -> Const a b

clearBit :: Const a b -> Int -> Const a b

complementBit :: Const a b -> Int -> Const a b

testBit :: Const a b -> Int -> Bool

bitSizeMaybe :: Const a b -> Maybe Int

bitSize :: Const a b -> Int

isSigned :: Const a b -> Bool

shiftL :: Const a b -> Int -> Const a b

unsafeShiftL :: Const a b -> Int -> Const a b

shiftR :: Const a b -> Int -> Const a b

unsafeShiftR :: Const a b -> Int -> Const a b

rotateL :: Const a b -> Int -> Const a b

rotateR :: Const a b -> Int -> Const a b

popCount :: Const a b -> Int

FiniteBits a => FiniteBits (Const a b)

Since: base-4.9.0.0

Defined in Data.Functor.Const

Methods

finiteBitSize :: Const a b -> Int

countLeadingZeros :: Const a b -> Int

countTrailingZeros :: Const a b -> Int

Hashable a => Hashable (Const a b)

Defined in Data.Hashable.Class

Methods

hashWithSalt :: Int -> Const a b -> Int

hash :: Const a b -> Int

type Rep1 (Const a :: k -> Type)

Defined in Data.Functor.Const

type Rep1 (Const a :: k -> Type) = D1 ('MetaData "Const" "Data.Functor.Const" "base" 'True) (C1 ('MetaCons "Const" 'PrefixI 'True) (S1 ('MetaSel ('Just "getConst") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedLazy) (Rec0 a)))

type Rep (Const a b)

Defined in Data.Functor.Const

type Rep (Const a b) = D1 ('MetaData "Const" "Data.Functor.Const" "base" 'True) (C1 ('MetaCons "Const" 'PrefixI 'True) (S1 ('MetaSel ('Just "getConst") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedLazy) (Rec0 a)))

(<$>) :: Functor f => (a -> b) -> f a -> f b infixl 4

An infix synonym for fmap.

The name of this operator is an allusion to $. Note the similarities between their types:

 ($)  ::              (a -> b) ->   a ->   b
(<$>) :: Functor f => (a -> b) -> f a -> f b

Whereas $ is function application, <$> is function application lifted over a Functor.

Examples

Convert from a Maybe Int to a Maybe String using show:

>>> show <$> Nothing
Nothing
>>> show <$> Just 3
Just "3"

Convert from an Either Int Int to an Either Int String using show:

>>> show <$> Left 17
Left 17
>>> show <$> Right 17
Right "17"

Double each element of a list:

>>> (*2) <$> [1,2,3]
[2,4,6]

Apply even to the second element of a pair:

>>> even <$> (2,2)
(2,True)

liftA3 :: Applicative f => (a -> b -> c -> d) -> f a -> f b -> f c -> f d

Lift a ternary function to actions.

Using ApplicativeDo: 'liftA3 f as bs cs' can be understood as the do expression

do a <- as
   b <- bs
   c <- cs
   pure (f a b c)

liftA :: Applicative f => (a -> b) -> f a -> f b

Lift a function to actions. This function may be used as a value for fmap in a Functor instance.

| Using ApplicativeDo: 'liftA f as' can be understood as the do expression

do a <- as
   pure (f a)

with an inferred Functor constraint, weaker than Applicative.

(<**>) :: Applicative f => f a -> f (a -> b) -> f b infixl 4

A variant of <*> with the arguments reversed.

Using ApplicativeDo: 'as <**> fs' can be understood as the do expression

do a <- as
   f <- fs
   pure (f a)

class Applicative f => Alternative (f :: Type -> Type) where

A monoid on applicative functors.

If defined, some and many should be the least solutions of the equations:

• some v = (:) <$> v <*> many v

• many v = some v <|> pure []

Minimal complete definition

empty, (<|>)

Methods

empty :: f a

The identity of <|>

(<|>) :: f a -> f a -> f a infixl 3

An associative binary operation

some :: f a -> f [a]

One or more.

many :: f a -> f [a]

Zero or more.

Instances

Alternative []

Since: base-2.1

Defined in GHC.Base

Methods

empty :: [a]

(<|>) :: [a] -> [a] -> [a]

some :: [a] -> [[a]]

many :: [a] -> [[a]]

Alternative Maybe

Since: base-2.1

Defined in GHC.Base

Methods

empty :: Maybe a

(<|>) :: Maybe a -> Maybe a -> Maybe a

some :: Maybe a -> Maybe [a]

many :: Maybe a -> Maybe [a]

Alternative IO

Since: base-4.9.0.0

Defined in GHC.Base

Methods

empty :: IO a

(<|>) :: IO a -> IO a -> IO a

some :: IO a -> IO [a]

many :: IO a -> IO [a]

Alternative Option

Since: base-4.9.0.0

Defined in Data.Semigroup

Methods

empty :: Option a

(<|>) :: Option a -> Option a -> Option a

some :: Option a -> Option [a]

many :: Option a -> Option [a]

Alternative ZipList

Since: base-4.11.0.0

Defined in Control.Applicative

Methods

empty :: ZipList a

(<|>) :: ZipList a -> ZipList a -> ZipList a

some :: ZipList a -> ZipList [a]

many :: ZipList a -> ZipList [a]

Alternative ReadP

Since: base-4.6.0.0

Defined in Text.ParserCombinators.ReadP

Methods

empty :: ReadP a

(<|>) :: ReadP a -> ReadP a -> ReadP a

some :: ReadP a -> ReadP [a]

many :: ReadP a -> ReadP [a]

Alternative Seq

Since: containers-0.5.4

Defined in Data.Sequence.Internal

Methods

empty :: Seq a

(<|>) :: Seq a -> Seq a -> Seq a

some :: Seq a -> Seq [a]

many :: Seq a -> Seq [a]

Alternative DList

Defined in Data.DList.Internal

Methods

empty :: DList a

(<|>) :: DList a -> DList a -> DList a

some :: DList a -> DList [a]

many :: DList a -> DList [a]

Alternative P

Since: base-4.5.0.0

Defined in Text.ParserCombinators.ReadP

Methods

empty :: P a

(<|>) :: P a -> P a -> P a

some :: P a -> P [a]

many :: P a -> P [a]

Alternative (U1 :: Type -> Type)

Since: base-4.9.0.0

Defined in GHC.Generics

Methods

empty :: U1 a

(<|>) :: U1 a -> U1 a -> U1 a

some :: U1 a -> U1 [a]

many :: U1 a -> U1 [a]

MonadPlus m => Alternative (WrappedMonad m)

Since: base-2.1

Defined in Control.Applicative

Methods

empty :: WrappedMonad m a

(<|>) :: WrappedMonad m a -> WrappedMonad m a -> WrappedMonad m a

some :: WrappedMonad m a -> WrappedMonad m [a]

many :: WrappedMonad m a -> WrappedMonad m [a]

ArrowPlus a => Alternative (ArrowMonad a)

Since: base-4.6.0.0

Defined in Control.Arrow

Methods

empty :: ArrowMonad a a0

(<|>) :: ArrowMonad a a0 -> ArrowMonad a a0 -> ArrowMonad a a0

some :: ArrowMonad a a0 -> ArrowMonad a [a0]

many :: ArrowMonad a a0 -> ArrowMonad a [a0]

Alternative (Proxy :: Type -> Type)

Since: base-4.9.0.0

Defined in Data.Proxy

Methods

empty :: Proxy a

(<|>) :: Proxy a -> Proxy a -> Proxy a

some :: Proxy a -> Proxy [a]

many :: Proxy a -> Proxy [a]

Alternative f => Alternative (Rec1 f)

Since: base-4.9.0.0

Defined in GHC.Generics

Methods

empty :: Rec1 f a

(<|>) :: Rec1 f a -> Rec1 f a -> Rec1 f a

some :: Rec1 f a -> Rec1 f [a]

many :: Rec1 f a -> Rec1 f [a]

(ArrowZero a, ArrowPlus a) => Alternative (WrappedArrow a b)

Since: base-2.1

Defined in Control.Applicative

Methods

empty :: WrappedArrow a b a0

(<|>) :: WrappedArrow a b a0 -> WrappedArrow a b a0 -> WrappedArrow a b a0

some :: WrappedArrow a b a0 -> WrappedArrow a b [a0]

many :: WrappedArrow a b a0 -> WrappedArrow a b [a0]

Alternative m => Alternative (Kleisli m a)

Since: base-4.14.0.0

Defined in Control.Arrow

Methods

empty :: Kleisli m a a0

(<|>) :: Kleisli m a a0 -> Kleisli m a a0 -> Kleisli m a a0

some :: Kleisli m a a0 -> Kleisli m a [a0]

many :: Kleisli m a a0 -> Kleisli m a [a0]

Alternative f => Alternative (Ap f)

Since: base-4.12.0.0

Defined in Data.Monoid

Methods

empty :: Ap f a

(<|>) :: Ap f a -> Ap f a -> Ap f a

some :: Ap f a -> Ap f [a]

many :: Ap f a -> Ap f [a]

Alternative f => Alternative (Alt f)

Since: base-4.8.0.0

Defined in Data.Semigroup.Internal

Methods

empty :: Alt f a

(<|>) :: Alt f a -> Alt f a -> Alt f a

some :: Alt f a -> Alt f [a]

many :: Alt f a -> Alt f [a]

(Functor m, MonadPlus m) => Alternative (StateT s m)

Defined in Control.Monad.Trans.State.Strict

Methods

empty :: StateT s m a

(<|>) :: StateT s m a -> StateT s m a -> StateT s m a

some :: StateT s m a -> StateT s m [a]

many :: StateT s m a -> StateT s m [a]

Alternative m => Alternative (ReaderT r m)

Defined in Control.Monad.Trans.Reader

Methods

empty :: ReaderT r m a

(<|>) :: ReaderT r m a -> ReaderT r m a -> ReaderT r m a

some :: ReaderT r m a -> ReaderT r m [a]

many :: ReaderT r m a -> ReaderT r m [a]

(Alternative f, Alternative g) => Alternative (f :*: g)

Since: base-4.9.0.0

Defined in GHC.Generics

Methods

empty :: (f :*: g) a

(<|>) :: (f :*: g) a -> (f :*: g) a -> (f :*: g) a

some :: (f :*: g) a -> (f :*: g) [a]

many :: (f :*: g) a -> (f :*: g) [a]

(Alternative f, Alternative g) => Alternative (Product f g)

Since: base-4.9.0.0

Defined in Data.Functor.Product

Methods

empty :: Product f g a

(<|>) :: Product f g a -> Product f g a -> Product f g a

some :: Product f g a -> Product f g [a]

many :: Product f g a -> Product f g [a]

Alternative f => Alternative (M1 i c f)

Since: base-4.9.0.0

Defined in GHC.Generics

Methods

empty :: M1 i c f a

(<|>) :: M1 i c f a -> M1 i c f a -> M1 i c f a

some :: M1 i c f a -> M1 i c f [a]

many :: M1 i c f a -> M1 i c f [a]

(Alternative f, Applicative g) => Alternative (f :.: g)

Since: base-4.9.0.0

Defined in GHC.Generics

Methods

empty :: (f :.: g) a

(<|>) :: (f :.: g) a -> (f :.: g) a -> (f :.: g) a

some :: (f :.: g) a -> (f :.: g) [a]

many :: (f :.: g) a -> (f :.: g) [a]

(Alternative f, Applicative g) => Alternative (Compose f g)

Since: base-4.9.0.0

Defined in Data.Functor.Compose

Methods

empty :: Compose f g a

(<|>) :: Compose f g a -> Compose f g a -> Compose f g a

some :: Compose f g a -> Compose f g [a]

many :: Compose f g a -> Compose f g [a]

module Temporal.Media

module Temporal.Class

Opcodes

zkwm :: Sig -> Sig -> SE ()

Writes to a zk variable at k-rate with mixing.

 zkwm  ksig, kndx [, imix]

csound doc: http://csound.com/docs/manual/zkwm.html

zkw :: Sig -> Sig -> SE ()

Writes to a zk variable at k-rate without mixing.

 zkw  ksig, kndx

csound doc: http://csound.com/docs/manual/zkw.html

zkr :: Sig -> Sig

Reads from a location in zk space at k-rate.

kres  zkr  kndx

csound doc: http://csound.com/docs/manual/zkr.html

zkmod :: Sig -> Sig -> Sig

Facilitates the modulation of one signal by another.

kres  zkmod  ksig, kzkmod

csound doc: http://csound.com/docs/manual/zkmod.html

zkcl :: Sig -> Sig -> SE ()

Clears one or more variables in the zk space.

 zkcl  kfirst, klast

csound doc: http://csound.com/docs/manual/zkcl.html

ziwm :: D -> D -> SE ()

Writes to a zk variable to an i-rate variable with mixing.

 ziwm  isig, indx [, imix]

csound doc: http://csound.com/docs/manual/ziwm.html

ziw :: D -> D -> SE ()

Writes to a zk variable at i-rate without mixing.

 ziw  isig, indx

csound doc: http://csound.com/docs/manual/ziw.html

zir :: D -> D

Reads from a location in zk space at i-rate.

ir  zir  indx

csound doc: http://csound.com/docs/manual/zir.html

zawm :: Sig -> Sig -> SE ()

Writes to a za variable at a-rate with mixing.

 zawm  asig, kndx [, imix]

csound doc: http://csound.com/docs/manual/zawm.html

zaw :: Sig -> Sig -> SE ()

Writes to a za variable at a-rate without mixing.

 zaw  asig, kndx

csound doc: http://csound.com/docs/manual/zaw.html

zarg :: Sig -> Sig -> Sig

Reads from a location in za space at a-rate, adds some gain.

ares  zarg  kndx, kgain

csound doc: http://csound.com/docs/manual/zarg.html

zar :: Sig -> Sig

Reads from a location in za space at a-rate.

ares  zar  kndx

csound doc: http://csound.com/docs/manual/zar.html

zamod :: Sig -> Sig -> Sig

Modulates one a-rate signal by a second one.

ares  zamod  asig, kzamod

csound doc: http://csound.com/docs/manual/zamod.html

zakinit :: D -> D -> SE ()

Establishes zak space.

Establishes zak space. Must be called only once.

 zakinit  isizea, isizek

csound doc: http://csound.com/docs/manual/zakinit.html

zacl :: Sig -> Sig -> SE ()

Clears one or more variables in the za space.

 zacl  kfirst, klast

csound doc: http://csound.com/docs/manual/zacl.html

vcella :: Sig -> Sig -> D -> D -> D -> D -> D -> SE ()

Cellular Automata

Unidimensional Cellular Automata applied to Csound vectors

 vcella  ktrig, kreinit, ioutFunc, initStateFunc, \
          iRuleFunc, ielements, irulelen [, iradius]

csound doc: http://csound.com/docs/manual/vcella.html

cell :: Sig -> Sig -> D -> D -> D -> D -> SE ()

Cellular Automaton

One-Dimensional Cellular Automaton. This opcode is the modified version of vcella by Gabriel Maldonado.

 cell  ktrig, kreinit, ioutFunc, initStateFunc, iRuleFunc, ielements

csound doc: http://csound.com/docs/manual/cell.html

vrandi :: Tab -> Sig -> Sig -> D -> SE ()

Generate a sort of 'vectorial band-limited noise'

 vrandi   ifn,  krange, kcps, ielements [, idstoffset] [, iseed] \
          [, isize] [, ioffset]

csound doc: http://csound.com/docs/manual/vrandi.html

vrandh :: Tab -> Sig -> Sig -> D -> SE ()

Generates a vector of random numbers stored into a table, holding the values for a period of time.

Generates a vector of random numbers stored into a table, holding the values for a period of time. Generates a sort of 'vectorial band-limited noise'.

 vrandh   ifn,  krange, kcps, ielements [, idstoffset] [, iseed] \
          [, isize] [, ioffset]

csound doc: http://csound.com/docs/manual/vrandh.html

vport :: Tab -> Sig -> D -> SE ()

Vectorial Control-rate Delay Paths

Generate a sort of vectorial portamento

 vport  ifn, khtime, ielements [, ifnInit]

csound doc: http://csound.com/docs/manual/vport.html

vecdelay :: Tab -> Tab -> Tab -> D -> D -> SE ()

Vectorial Control-rate Delay Paths

Generate a sort of vectorial delay

 vecdelay   ifn, ifnIn, ifnDel, ielements, imaxdel [, iskip]

csound doc: http://csound.com/docs/manual/vecdelay.html

vdelayk :: Sig -> Sig -> D -> Sig

k-rate variable time delay.

Variable delay applied to a k-rate signal

kout  vdelayk   ksig, kdel, imaxdel [, iskip, imode]

csound doc: http://csound.com/docs/manual/vdelayk.html

vwrap :: Tab -> Sig -> Sig -> D -> SE ()

Limiting and Wrapping Vectorial Signals

Wraps elements of vectorial control signals.

 vwrap   ifn, kmin, kmax, ielements

csound doc: http://csound.com/docs/manual/vwrap.html

vmirror :: Tab -> Sig -> Sig -> D -> SE ()

Limiting and Wrapping Vectorial Signals

Reflects elements of vectorial control signals on thresholds.

 vmirror   ifn, kmin, kmax, ielements

csound doc: http://csound.com/docs/manual/vmirror.html

vlimit :: Tab -> Sig -> Sig -> D -> SE ()

Limiting and Wrapping Vectorial Signals

Limits elements of vectorial control signals.

 vlimit   ifn, kmin, kmax, ielements

csound doc: http://csound.com/docs/manual/vlimit.html

vlinseg :: Tab -> D -> Tab -> D -> Tab -> SE ()

Vectorial envelope generator

Generate linear vectorial segments

 vlinseg   ifnout, ielements, ifn1, idur1, ifn2 [, idur2, ifn3 [...]]

csound doc: http://csound.com/docs/manual/vlinseg.html

vexpseg :: Tab -> D -> Tab -> D -> Tab -> SE ()

Vectorial envelope generator

Generate exponential vectorial segments

 vexpseg   ifnout, ielements, ifn1, idur1, ifn2 [, idur2, ifn3 [...]]

csound doc: http://csound.com/docs/manual/vexpseg.html

vsubv_i :: Tab -> Tab -> D -> SE ()

Performs subtraction between two vectorial control signals at init time.

 vsubv_i   ifn1, ifn2, ielements [, idstoffset] [, isrcoffset]

csound doc: http://csound.com/docs/manual/vsubv_i.html

vsubv :: Tab -> Tab -> Sig -> SE ()

Performs subtraction between two vectorial control signals

 vsubv   ifn1, ifn2, kelements [, kdstoffset] [, ksrcoffset] [,kverbose]

csound doc: http://csound.com/docs/manual/vsubv.html

vpowv_i :: Tab -> Tab -> D -> SE ()

Performs power-of operations between two vectorial control signals at init time.

 vpowv_i  ifn1, ifn2, ielements [, idstoffset] [, isrcoffset]

csound doc: http://csound.com/docs/manual/vpowv_i.html

vpowv :: Tab -> Tab -> Sig -> SE ()

Performs power-of operations between two vectorial control signals

 vpowv  ifn1, ifn2, kelements [, kdstoffset] [, ksrcoffset] [,kverbose]

csound doc: http://csound.com/docs/manual/vpowv.html

vmultv_i :: Tab -> Tab -> D -> SE ()

Performs mutiplication between two vectorial control signals at init time.

 vmultv_i   ifn1, ifn2, ielements [, idstoffset] [, isrcoffset]

csound doc: http://csound.com/docs/manual/vmultv_i.html

vmultv :: Tab -> Tab -> Sig -> SE ()

Performs mutiplication between two vectorial control signals

 vmultv   ifn1, ifn2, kelements [, kdstoffset] [, ksrcoffset] [,kverbose]

csound doc: http://csound.com/docs/manual/vmultv.html

vmap :: Tab -> Tab -> D -> SE ()

Maps elements from a vector according to indexes contained in another vector.

Maps elements from a vector onto another according to the indexes of a this vector.

 vmap   ifn1, ifn2, ielements [,idstoffset, isrcoffset]

csound doc: http://csound.com/docs/manual/vmap.html

vexpv_i :: Tab -> Tab -> D -> SE ()

Performs exponential operations between two vectorial control signals at init time.

 vexpv_i   ifn1, ifn2, ielements [, idstoffset] [, isrcoffset]

csound doc: http://csound.com/docs/manual/vexpv_i.html

vexpv :: Tab -> Tab -> Sig -> SE ()

Performs exponential operations between two vectorial control signals

 vexpv   ifn1, ifn2, kelements [, kdstoffset] [, ksrcoffset] [,kverbose]

csound doc: http://csound.com/docs/manual/vexpv.html

vdivv_i :: Tab -> Tab -> D -> SE ()

Performs division between two vectorial control signals at init time.

 vdivv_i   ifn1, ifn2, ielements [, idstoffset] [, isrcoffset]

csound doc: http://csound.com/docs/manual/vdivv_i.html

vdivv :: Tab -> Tab -> Sig -> SE ()

Performs division between two vectorial control signals

 vdivv   ifn1, ifn2, kelements [, kdstoffset] [, ksrcoffset] [,kverbose]

csound doc: http://csound.com/docs/manual/vdivv.html

vcopy_i :: Tab -> Tab -> D -> SE ()

Copies a vector from one table to another.

 vcopy_i   ifn1, ifn2, ielements [,idstoffset, isrcoffset]

csound doc: http://csound.com/docs/manual/vcopy_i.html

vcopy :: Tab -> Tab -> Sig -> SE ()

Copies between two vectorial control signals

 vcopy   ifn1, ifn2, kelements [, kdstoffset] [, ksrcoffset] [, kverbose]

csound doc: http://csound.com/docs/manual/vcopy.html

vaddv_i :: Tab -> Tab -> D -> SE ()

Performs addition between two vectorial control signals at init time.

 vaddv_i   ifn1, ifn2, ielements [, idstoffset] [, isrcoffset]

csound doc: http://csound.com/docs/manual/vaddv_i.html

vaddv :: Tab -> Tab -> Sig -> SE ()

Performs addition between two vectorial control signals.

 vaddv   ifn1, ifn2, kelements [, kdstoffset] [, ksrcoffset] [,kverbose]

csound doc: http://csound.com/docs/manual/vaddv.html

vpow_i :: Tab -> D -> D -> SE ()

Raises each element of a vector to a scalar power

 vpow_i   ifn, ival, ielements [, idstoffset]

csound doc: http://csound.com/docs/manual/vpow_i.html

vpow :: Tab -> Sig -> Sig -> SE ()

Raises each element of a vector to a scalar power.

 vpow   ifn, kval, kelements [, kdstoffset] [, kverbose]

csound doc: http://csound.com/docs/manual/vpow.html

vmult_i :: Tab -> D -> D -> SE ()

Multiplies a vector in a table by a scalar value.

 vmult_i   ifn, ival, ielements [, idstoffset]

csound doc: http://csound.com/docs/manual/vmult_i.html

vmult :: Tab -> Sig -> Sig -> SE ()

Multiplies a vector in a table by a scalar value.

 vmult   ifn, kval, kelements [, kdstoffset] [, kverbose]

csound doc: http://csound.com/docs/manual/vmult.html

vexp_i :: Tab -> D -> D -> SE ()

Performs power-of operations between a vector and a scalar

 vexp_i   ifn, ival, ielements[, idstoffset]

csound doc: http://csound.com/docs/manual/vexp_i.html

vexp :: Tab -> Sig -> Sig -> SE ()

Performs power-of operations between a vector and a scalar

 vexp   ifn, kval, kelements [, kdstoffset] [, kverbose]

csound doc: http://csound.com/docs/manual/vexp.html

vadd_i :: Tab -> D -> D -> SE ()

Adds a scalar value to a vector in a table.

 vadd_i   ifn, ival, ielements [, idstoffset]

csound doc: http://csound.com/docs/manual/vadd_i.html

vadd :: Tab -> Sig -> Sig -> SE ()

Adds a scalar value to a vector in a table.

 vadd   ifn, kval, kelements [, kdstoffset] [, kverbose]

csound doc: http://csound.com/docs/manual/vadd.html

vtabwk :: Sig -> Tab -> Sig -> SE ()

Write vectors (to tables -or arrays of vectors).

This opcode writes vectors to tables at k-rate.

 vtabwk   kndx, ifn, kinarg1 [, kinarg2, kinarg3 , .... , kinargN ]

csound doc: http://csound.com/docs/manual/vtabwk.html

vtabwi :: D -> Tab -> D -> SE ()

Write vectors (to tables -or arrays of vectors).

This opcode writes vectors to tables at init time.

 vtabwi   indx, ifn, inarg1 [, inarg2, inarg3 , .... , inargN ]

csound doc: http://csound.com/docs/manual/vtabwi.html

vtabwa :: Sig -> Tab -> Sig -> SE ()

Write vectors (to tables -or arrays of vectors).

This opcode writes vectors to tables at a-rate.

 vtabwa   andx, ifn, ainarg1 [, ainarg2, ainarg3 , .... , ainargN ]

csound doc: http://csound.com/docs/manual/vtabwa.html

vtablewk :: Sig -> Tab -> D -> Sig -> SE ()

Write vectors (to tables -or arrays of vectors).

This opcode writes vectors to tables at k-rate.

 vtablewk   kndx, kfn, ixmode, kinarg1 [, kinarg2, kinarg3 , .... , kinargN ]

csound doc: http://csound.com/docs/manual/vtablewk.html

vtablewi :: D -> Tab -> D -> D -> SE ()

Write vectors (to tables -or arrays of vectors).

This opcode writes vectors to tables at init time.

 vtablewi   indx, ifn, ixmode, inarg1 [, inarg2, inarg3 , .... , inargN ]

csound doc: http://csound.com/docs/manual/vtablewi.html

vtablewa :: Sig -> Tab -> D -> Sig -> SE ()

Write vectors (to tables -or arrays of vectors).

This opcode writes vectors to tables at a-rate.

 vtablewa   andx, kfn, ixmode, ainarg1 [, ainarg2, ainarg3 , .... , ainargN ]

csound doc: http://csound.com/docs/manual/vtablewa.html

vtablek :: Sig -> Tab -> Sig -> D -> Sig -> SE ()

Read vectors (from tables -or arrays of vectors).

This opcode reads vectors from tables at k-rate.

 vtablek   kndx, kfn, kinterp, ixmode, kout1 [, kout2, kout3, .... , koutN ]

csound doc: http://csound.com/docs/manual/vtablek.html

vtablei :: D -> Tab -> D -> D -> D -> SE ()

Read vectors (from tables -or arrays of vectors).

This opcode reads vectors from tables.

 vtablei   indx, ifn, interp, ixmode, iout1 [, iout2, iout3, .... , ioutN ]

csound doc: http://csound.com/docs/manual/vtablei.html

vtablea :: Sig -> Tab -> Sig -> D -> Sig -> SE ()

Read vectors (from tables -or arrays of vectors).

This opcode reads vectors from tables at a-rate.

 vtablea   andx, kfn, kinterp, ixmode, aout1 [, aout2, aout3, .... , aoutN ]

csound doc: http://csound.com/docs/manual/vtablea.html

vtable1k :: Tab -> Sig -> SE ()

Read a vector (several scalars simultaneously) from a table.

This opcode reads vectors from tables at k-rate.

 vtable1k   kfn,kout1 [, kout2, kout3, .... , koutN ]

csound doc: http://csound.com/docs/manual/vtable1k.html

vtabk :: Sig -> Tab -> Sig -> SE ()

Read vectors (from tables -or arrays of vectors).

This opcode reads vectors from tables at k-rate.

 vtabk   kndx, ifn, kout1 [, kout2, kout3, .... , koutN ]

csound doc: http://csound.com/docs/manual/vtabk.html

vtabi :: D -> Tab -> D -> SE ()

Read vectors (from tables -or arrays of vectors).

This opcode reads vectors from tables.

 vtabi   indx, ifn, iout1 [, iout2, iout3, .... , ioutN ]

csound doc: http://csound.com/docs/manual/vtabi.html

vtaba :: Sig -> Tab -> Sig -> SE ()

Read vectors (from tables -or arrays of vectors).

This opcode reads vectors from tables at a-rate.

 vtaba   andx, ifn, aout1 [, aout2, aout3, .... , aoutN ]

csound doc: http://csound.com/docs/manual/vtaba.html

sndload :: Str -> SE ()

Loads a sound file into memory for use by loscilx

sndload loads a sound file into memory for use by loscilx.

 sndload  Sfname[, ifmt[, ichns[, isr[, ibas[, iamp[, istrt   \
          [, ilpmod[, ilps[, ilpe]]]]]]]]]

csound doc: http://csound.com/docs/manual/sndload.html

getftargs :: D -> Sig -> Str

Fill a string variable with the arguments used to create a function table at k-rate.

getftargs writes the arguments used to create a function table to a string variable. getftargs runs both at initialization and performance time.

Sdst  getftargs  iftno, ktrig

csound doc: http://csound.com/docs/manual/getftargs.html

ftgentmp :: D -> D -> D -> D -> D -> [D] -> SE Tab

Generate a score function table from within the orchestra, which is deleted at the end of the note.

Generate a score function table from within the orchestra, which is optionally deleted at the end of the note.

ifno  ftgentmp  ip1, ip2dummy, isize, igen, iarga, iargb, ...

csound doc: http://csound.com/docs/manual/ftgentmp.html

ftgen :: Tab -> D -> D -> D -> D -> SE D

Generate a score function table from within the orchestra.

gir  ftgen  ifn, itime, isize, igen, iarga [, iargb ] [...]
gir  ftgen  ifn, itime, isize, igen, iarray

csound doc: http://csound.com/docs/manual/ftgen.html

ftfree :: Tab -> D -> SE ()

Deletes function table.

 ftfree  ifno, iwhen

csound doc: http://csound.com/docs/manual/ftfree.html

strupperk :: Str -> Str

Convert a string to upper case

Convert Ssrc to upper case, and write the result to Sdst. strupperk runs both at init and performance time.

Sdst  strupperk  Ssrc

csound doc: http://csound.com/docs/manual/strupperk.html

strupper :: Str -> Str

Convert a string to upper case

Convert Ssrc to upper case, and write the result to Sdst. strupper runs at init time only.

Sdst  strupper  Ssrc

csound doc: http://csound.com/docs/manual/strupper.html

strtolk :: Str -> Sig

Converts a string to a signed integer (k-rate).

Convert a string to a signed integer value at i- or k-rate. It is also possible to pass an strset index or a string p-field from the score instead of a string argument. If the string cannot be parsed as an integer number, an init or perf error occurs and the instrument is deactivated.

kr  strtolk  Sstr
kr  strtolk  kndx

csound doc: http://csound.com/docs/manual/strtolk.html

strtol :: Str -> D

Converts a string to a signed integer (i-rate).

Convert a string to a signed integer value. It is also possible to pass an strset index or a string p-field from the score instead of a string argument. If the string cannot be parsed as an integer number, an init error occurs and the instrument is deactivated.

ir  strtol  Sstr
ir  strtol  indx

csound doc: http://csound.com/docs/manual/strtol.html

strtodk :: Str -> Sig

Converts a string to a float (k-rate).

Convert a string to a floating point value at i- or k-rate. It is also possible to pass an strset index or a string p-field from the score instead of a string argument. If the string cannot be parsed as a floating point or integer number, an init or perf error occurs and the instrument is deactivated.

kr  strtodk  Sstr
kr  strtodk  kndx

csound doc: http://csound.com/docs/manual/strtodk.html

strtod :: Str -> D

Converts a string to a float (i-rate).

Convert a string to a floating point value. It is also possible to pass an strset index or a string p-field from the score instead of a string argument. If the string cannot be parsed as a floating point or integer number, an init or perf error occurs and the instrument is deactivated.

ir  strtod  Sstr
ir  strtod  indx

csound doc: http://csound.com/docs/manual/strtod.html

strlowerk :: Str -> Str

Convert a string to lower case

Convert Ssrc to lower case, and write the result to Sdst. strlowerk runs both at init and performance time.

Sdst  strlowerk  Ssrc

csound doc: http://csound.com/docs/manual/strlowerk.html

strlower :: Str -> Str

Convert a string to lower case

Convert Ssrc to lower case, and write the result to Sdst. strlower runs at init time only.

Sdst  strlower  Ssrc

csound doc: http://csound.com/docs/manual/strlower.html

strchark :: Str -> Sig

Return the ASCII code of a character in a string

Return the ASCII code of the character in Sstr at kpos (defaults to zero which means the first character), or zero if kpos is out of range. strchark runs both at init and performance time.

kchr  strchark  Sstr[, kpos]

csound doc: http://csound.com/docs/manual/strchark.html

strchar :: Str -> D

Return the ASCII code of a character in a string

Return the ASCII code of the character in Sstr at ipos (defaults to zero which means the first character), or zero if ipos is out of range. strchar runs at init time only.

ichr  strchar  Sstr[, ipos]

csound doc: http://csound.com/docs/manual/strchar.html

strsubk :: Str -> Sig -> Sig -> Str

Extract a substring

Return a substring of the source string. strsubk runs both at init and performance time.

Sdst  strsubk  Ssrc, kstart, kend

csound doc: http://csound.com/docs/manual/strsubk.html

strsub :: Str -> Str

Extract a substring

Return a substring of the source string. strsub runs at init time only.

Sdst  strsub  Ssrc[, istart[, iend]]

csound doc: http://csound.com/docs/manual/strsub.html

strrindexk :: Str -> Str -> Sig

Return the position of the last occurence of a string in another string

Return the position of the last occurence of S2 in S1, or -1 if not found. If S2 is empty, the length of S1 is returned. strrindexk runs both at init and performance time.

kpos  strrindexk  S1, S2

csound doc: http://csound.com/docs/manual/strrindexk.html

strrindex :: Str -> Str -> D

Return the position of the last occurence of a string in another string

Return the position of the last occurence of S2 in S1, or -1 if not found. If S2 is empty, the length of S1 is returned. strrindex runs at init time only.

ipos  strrindex  S1, S2

csound doc: http://csound.com/docs/manual/strrindex.html

strlenk :: Str -> Sig

Return the length of a string

Return the length of a string, or zero if it is empty. strlenk runs both at init and performance time.

klen  strlenk  Sstr

csound doc: http://csound.com/docs/manual/strlenk.html

strlen :: Str -> D

Return the length of a string

Return the length of a string, or zero if it is empty. strlen runs at init time only.

ilen  strlen  Sstr

csound doc: http://csound.com/docs/manual/strlen.html

strindexk :: Str -> Str -> Sig

Return the position of the first occurence of a string in another string

Return the position of the first occurence of S2 in S1, or -1 if not found. If S2 is empty, 0 is returned. strindexk runs both at init and performance time.

kpos  strindexk  S1, S2

csound doc: http://csound.com/docs/manual/strindexk.html

strindex :: Str -> Str -> D

Return the position of the first occurence of a string in another string

Return the position of the first occurence of S2 in S1, or -1 if not found. If S2 is empty, 0 is returned. strindex runs at init time only.

ipos  strindex  S1, S2

csound doc: http://csound.com/docs/manual/strindex.html

strcpyk :: Str -> Str

Assign value to a string variable (k-rate)

Assign to a string variable by copying the source which may be a constant or another string variable. strcpyk does the assignment both at initialization and performance time.

Sdst  strcpyk  Ssrc

csound doc: http://csound.com/docs/manual/strcpyk.html

strcpy :: Str -> Str

Assign value to a string variable

Assign to a string variable by copying the source which may be a constant or another string variable. strcpy and = copy the string at i-time only.

Sdst  strcpy  Ssrc

csound doc: http://csound.com/docs/manual/strcpy.html

strcmpk :: Str -> Str -> Sig

Compare strings

Compare strings and set the result to -1, 0, or 1 if the first string is less than, equal to, or greater than the second, respectively. strcmpk does the comparison both at initialization and performance time.

kres  strcmpk  S1, S2

csound doc: http://csound.com/docs/manual/strcmpk.html

strcmp :: Str -> Str -> D

Compare strings

Compare strings and set the result to -1, 0, or 1 if the first string is less than, equal to, or greater than the second, respectively. strcmp compares at i-time only.

ires  strcmp  S1, S2

csound doc: http://csound.com/docs/manual/strcmp.html

strcatk :: Str -> Str -> Str

Concatenate strings (k-rate)

Concatenate two strings and store the result in a variable. strcatk does the concatenation both at initialization and performance time. It is allowed for any of the input arguments to be the same as the output variable.

Sdst  strcatk  Ssrc1, Ssrc2

csound doc: http://csound.com/docs/manual/strcatk.html

strcat :: Str -> Str -> Str

Concatenate strings

Concatenate two strings and store the result in a variable. strcat runs at i-time only. It is allowed for any of the input arguments to be the same as the output variable.

Sdst  strcat  Ssrc1, Ssrc2

csound doc: http://csound.com/docs/manual/strcat.html

sprintfk :: Str -> Sig -> Str

printf-style formatted output to a string variable at k-rate.

sprintfk writes printf-style formatted output to a string variable, similarly to the C function sprintf(). sprintfk runs both at initialization and performance time.

Sdst  sprintfk  Sfmt, xarg1[, xarg2[, ... ]]

csound doc: http://csound.com/docs/manual/sprintfk.html

sprintf :: Str -> Sig -> Str

printf-style formatted output to a string variable.

sprintf write printf-style formatted output to a string variable, similarly to the C function sprintf(). sprintf runs at i-time only.

Sdst  sprintf  Sfmt, xarg1[, xarg2[, ... ]]

csound doc: http://csound.com/docs/manual/sprintf.html

puts :: Str -> Sig -> SE ()

Print a string constant or variable

puts prints a string with an optional newline at the end whenever the trigger signal is positive and changes.

 puts  Sstr, ktrig[, inonl]

csound doc: http://csound.com/docs/manual/puts.html

strset :: D -> D -> SE ()

Allows a string to be linked with a numeric value.

 strset  iarg, istring

csound doc: http://csound.com/docs/manual/strset.html

strget :: D -> Str

Set string variable to value from strset table or string p-field

strget sets a string variable at initialization time to the value stored in strset table at the specified index, or a string p-field from the score. If there is no string defined for the index, the variable is set to an empty string.

Sdst  strget  indx

csound doc: http://csound.com/docs/manual/strget.html

strfromurl :: Str -> Str

Set string variable to value read from an URL

strfromurl sets a string variable at initialization time to the value found from reading an URL.

Sdst  strfromurl  StringURL

csound doc: http://csound.com/docs/manual/strfromurl.html

temposcal :: Sig -> Sig -> Sig -> Tab -> Sig -> Sig

Phase-locked vocoder processing with onset detection/processing, 'tempo-scaling'.

temposcal implements phase-locked vocoder processing using function tables containing sampled-sound sources, with GEN01, and temposcal will accept deferred allocation tables.

asig  temposcal  ktimescal, kamp, kpitch, ktab, klock [,ifftsize, idecim, ithresh]
          

csound doc: http://csound.com/docs/manual/temposcal.html

paulstretch :: D -> D -> D -> Sig

Extreme time-stretching algorithm by Nasca Octavian Paul.

The paulstretch opcode is a lightweight implementation of the PaulStretch time-stretching algorithm by Nasca Octavian Paul. It is ideal for timestretching a signal by very large amounts.

asig  paulstretch  istretch, iwindowsize, ift
        

csound doc: http://csound.com/docs/manual/paulstretch.html

mp3scal :: Str -> Sig -> Sig -> Sig -> (Sig, Sig, Sig)

Phase-locked vocoder processing with onset detection/processing, 'tempo-scaling'.

mp3scal implements phase-locked vocoder processing from mp3-format disk files, resampling if necessary.

asig, asig2, ktime  mp3scal  Sfile, ktimescal, kpitch, kamp[, iskip, ifftsize, idecim, ilock]
          

csound doc: http://csound.com/docs/manual/mp3scal.html

mincer :: Sig -> Sig -> Sig -> Tab -> Sig -> Sig

Phase-locked vocoder processing.

mincer implements phase-locked vocoder processing using function tables containing sampled-sound sources, with GEN01, and mincer will accept deferred allocation tables.

asig  mincer  atimpt, kamp, kpitch, ktab, klock[,ifftsize,idecim]
          

csound doc: http://csound.com/docs/manual/mincer.html

filescal :: Tuple a => Sig -> Sig -> Sig -> Str -> Sig -> a

Phase-locked vocoder processing with onset detection/processing, 'tempo-scaling'.

filescal implements phase-locked vocoder processing from disk files, resampling if necessary.

asig[,asig2]  filescal  ktimescal, kamp, kpitch, Sfile, klock [,ifftsize, idecim, ithresh]
          

csound doc: http://csound.com/docs/manual/filescal.html

centroid :: Sig -> Sig -> D -> Sig

Calculate the spectral centroid of a signal.

Calculate the spectral centroid of an audio signal on a given trigger.

kcent  centroid  asig, ktrig, ifftsize

csound doc: http://csound.com/docs/manual/centroid.html

lorisread :: Sig -> Str -> D -> Sig -> Sig -> Sig -> SE ()

Imports a set of bandwidth-enhanced partials from a SDIF-format data file, applying control-rate frequency, amplitude, and bandwidth scaling envelopes, and stores the modified partials in memory.

lorisread imports a set of bandwidth-enhanced partials from a SDIF-format data file, applying control-rate frequency, amplitude, and bandwidth scaling envelopes, and stores the modified partials in memory.

 lorisread  ktimpnt, ifilcod, istoreidx, kfreqenv, kampenv, kbwenv[, ifadetime]

csound doc: http://csound.com/docs/manual/lorisread.html

lorisplay :: D -> Sig -> Sig -> Sig -> Sig

renders a stored set of bandwidth-enhanced partials using the method of Bandwidth-Enhanced Additive Synthesis implemented in the Loris software, applying control-rate frequency, amplitude, and bandwidth scaling envelopes.

lorisplay renders a stored set of bandwidth-enhanced partials using the method of Bandwidth-Enhanced Additive Synthesis implemented in the Loris software, applying control-rate frequency, amplitude, and bandwidth scaling envelopes.

ar  lorisplay  ireadidx, kfreqenv, kampenv, kbwenv

csound doc: http://csound.com/docs/manual/lorisplay.html

lorismorph :: D -> D -> D -> Sig -> Sig -> Sig -> SE ()

Morphs two stored sets of bandwidth-enhanced partials and stores a new set of partials representing the morphed sound. The morph is performed by linearly interpolating the parameter envelopes (frequency, amplitude, and bandwidth, or noisiness) of the bandwidth-enhanced partials according to control-rate frequency, amplitude, and bandwidth morphing functions.

lorismorph morphs two stored sets of bandwidth-enhanced partials and stores a new set of partials representing the morphed sound. The morph is performed by linearly interpolating the parameter envelopes (frequency, amplitude, and bandwidth, or noisiness) of the bandwidth-enhanced partials according to control-rate frequency, amplitude, and bandwidth morphing functions.

 lorismorph  isrcidx, itgtidx, istoreidx, kfreqmorphenv, kampmorphenv, kbwmorphenv

csound doc: http://csound.com/docs/manual/lorismorph.html

atsSinnoi :: Sig -> Sig -> Sig -> Sig -> D -> D -> Sig

uses the data from an ATS analysis file to perform resynthesis.

ATSsinnoi reads data from an ATS data file and uses the information to synthesize sines and noise together.

ar  ATSsinnoi  ktimepnt, ksinlev, knzlev, kfmod, iatsfile, ipartials \
              [, ipartialoffset, ipartialincr]

csound doc: http://csound.com/docs/manual/ATSsinnoi.html

atsReadnz :: Sig -> D -> D -> Sig

reads data from an ATS file.

ATSreadnz returns the energy (kenergy) of a user specified noise band (1-25 bands) at the time indicated by the time pointer ktimepnt.

kenergy  ATSreadnz  ktimepnt, iatsfile, iband

csound doc: http://csound.com/docs/manual/ATSreadnz.html

atsRead :: Sig -> D -> D -> (Sig, Sig)

reads data from an ATS file.

ATSread returns the amplitude (kamp) and frequency (kfreq) information of a user specified partial contained in the ATS analysis file at the time indicated by the time pointer ktimepnt.

kfreq, kamp  ATSread  ktimepnt, iatsfile, ipartial

csound doc: http://csound.com/docs/manual/ATSread.html

atsPartialtap :: D -> (Sig, Sig)

returns a frequency, amplitude pair from an ATSbufread opcode.

ATSpartialtap takes a partial number and returns a frequency, amplitude pair. The frequency and amplitude data comes from an ATSbufread opcode.

kfrq, kamp  ATSpartialtap  ipartialnum

csound doc: http://csound.com/docs/manual/ATSpartialtap.html

atsInterpread :: Sig -> Sig

allows a user to determine the frequency envelope of any ATSbufread.

ATSinterpread allows a user to determine the frequency envelope of any ATSbufread.

kamp  ATSinterpread  kfreq

csound doc: http://csound.com/docs/manual/ATSinterpread.html

atsInfo :: D -> D -> D

reads data out of the header of an ATS file.

atsinfo reads data out of the header of an ATS file.

idata  ATSinfo  iatsfile, ilocation

csound doc: http://csound.com/docs/manual/ATSinfo.html

atsCross :: Sig -> Sig -> D -> Tab -> Sig -> Sig -> D -> Sig

perform cross synthesis from ATS analysis files.

ATScross uses data from an ATS analysis file and data from an ATSbufread to perform cross synthesis.

ar  ATScross  ktimepnt, kfmod, iatsfile, ifn, kmylev, kbuflev, ipartials \
              [, ipartialoffset, ipartialincr]

csound doc: http://csound.com/docs/manual/ATScross.html

atsBufread :: Sig -> Sig -> D -> D -> SE ()

reads data from and ATS data file and stores it in an internal data table of frequency, amplitude pairs.

ATSbufread reads data from and ATS data file and stores it in an internal data table of frequency, amplitude pairs.

 ATSbufread  ktimepnt, kfmod, iatsfile, ipartials[, ipartialoffset, \
              ipartialincr]

csound doc: http://csound.com/docs/manual/ATSbufread.html

atsAddnz :: Sig -> D -> D -> Sig

uses the data from an ATS analysis file to perform noise resynthesis.

ATSaddnz reads from an ATS analysis file and uses the data to perform additive synthesis using a modified randi function.

ar  ATSaddnz  ktimepnt, iatsfile, ibands[, ibandoffset, ibandincr]

csound doc: http://csound.com/docs/manual/ATSaddnz.html

atsAdd :: Sig -> Sig -> D -> Tab -> D -> Sig

uses the data from an ATS analysis file to perform additive synthesis.

ATSadd reads from an ATS analysis file and uses the data to perform additive synthesis using an internal array of interpolating oscillators.

ar  ATSadd  ktimepnt, kfmod, iatsfile, ifn, ipartials[, ipartialoffset, \
            ipartialincr, igatefn]

csound doc: http://csound.com/docs/manual/ATSadd.html

trsplit :: Spec -> Sig -> (Spec, Spec)

Streaming partial track frequency splitting.

The trsplit opcode takes an input containg a TRACKS pv streaming signal (as generated, for instance by partials) and splits it into two signals according to a k-rate frequency 'split point'. The first output will contain all tracks up from 0Hz to the split frequency and the second will contain the tracks from the split frequency up to the Nyquist. It can also, optionally, scale the gain of the output signals by a k-rate amount (default 1). The result is two output signals containing only part of the original spectrum.

fsiglow, fsighi  trsplit  fin, ksplit[, kgainlow, kgainhigh]

csound doc: http://csound.com/docs/manual/trsplit.html

trshift :: Spec -> Sig -> Spec

Streaming partial track frequency scaling.

The trshift opcode takes an input containg a TRACKS pv streaming signal (as generated, for instance by partials) and shifts all frequencies by a k-rate frequency. It can also, optionally, scale the gain of the signal by a k-rate amount (default 1). The result is frequency shifting of the input tracks.

fsig  trshift  fin, kpshift[, kgain]

csound doc: http://csound.com/docs/manual/trshift.html

trscale :: Spec -> Sig -> Spec

Streaming partial track frequency scaling.

The trscale opcode takes an input containg a TRACKS pv streaming signal (as generated, for instance by partials) and scales all frequencies by a k-rate amount. It can also, optionally, scale the gain of the signal by a k-rate amount (default 1). The result is pitch shifting of the input tracks.

fsig  trscale  fin, kpitch[, kgain]

csound doc: http://csound.com/docs/manual/trscale.html

trmix :: Spec -> Spec -> Spec

Streaming partial track mixing.

The trmix opcode takes two inputs containg TRACKS pv streaming signals (as generated, for instance by partials) and mixes them into a single TRACKS stream. Tracks will be mixed up to the available space (defined by the original number of FFT bins in the analysed signals). If the sum of the input tracks exceeds this space, the higher-ordered tracks in the second input will be pruned.

fsig  trmix  fin1, fin2 

csound doc: http://csound.com/docs/manual/trmix.html

trlowest :: Spec -> Sig -> (Spec, Sig, Sig)

Extracts the lowest-frequency track from a streaming track input signal.

The trlowest opcode takes an input containg TRACKS pv streaming signals (as generated, for instance by partials) and outputs only the lowest track. In addition it outputs two k-rate signals, corresponding to the frequency and amplitude of the lowest track signal.

fsig, kfr, kamp  trlowest  fin1, kscal

csound doc: http://csound.com/docs/manual/trlowest.html

trhighest :: Spec -> Sig -> (Spec, Sig, Sig)

Extracts the highest-frequency track from a streaming track input signal.

The trhighest opcode takes an input containg TRACKS pv streaming signals (as generated, for instance by partials) and outputs only the highest track. In addition it outputs two k-rate signals, corresponding to the frequency and amplitude of the highest track signal.

fsig, kfr, kamp  trhighest  fin1, kscal

csound doc: http://csound.com/docs/manual/trhighest.html

trfilter :: Spec -> Sig -> Tab -> Spec

Streaming partial track filtering.

The trfilter opcode takes an input containg a TRACKS pv streaming signal (as generated, for instance by partials) and filters it using an amplitude response curve stored in a function table. The function table can have any size (no restriction to powers-of-two). The table lookup is done by linear-interpolation. It is possible to create time-varying filter curves by updating the amlitude response table with a table-writing opcode.

fsig  trfilter  fin, kamnt, ifn

csound doc: http://csound.com/docs/manual/trfilter.html

trcross :: Spec -> Spec -> Sig -> Sig -> Spec

Streaming partial track cross-synthesis.

The trcross opcode takes two inputs containg TRACKS pv streaming signals (as generated, for instance by partials) and cross-synthesises them into a single TRACKS stream. Two different modes of operation are used: mode 0, cross-synthesis by multiplication of the amplitudes of the two inputs and mode 1, cross-synthesis by the substititution of the amplitudes of input 1 by the input 2. Frequencies and phases of input 1 are preserved in the output. The cross-synthesis is done by matching tracks between the two inputs using a 'search interval'. The matching algorithm will look for tracks in the second input that are within the search interval around each track in the first input. This interval can be changed at the control rate. Wider search intervals will find more matches.

fsig  trcross  fin1, fin2, ksearch, kdepth [, kmode] 

csound doc: http://csound.com/docs/manual/trcross.html

tradsyn :: Spec -> Sig -> Sig -> Sig -> Tab -> Sig

Streaming partial track additive synthesis

The tradsyn opcode takes an input containg a TRACKS pv streaming signal (as generated, for instance by partials),as described in Lazzarini et al, "Time-stretching using the Instantaneous Frequency Distribution and Partial Tracking", Proc.of ICMC05, Barcelona. It resynthesises the signal using linear amplitude and frequency interpolation to drive a bank of interpolating oscillators with amplitude and pitch scaling controls.

asig  tradsyn  fin, kscal, kpitch, kmaxtracks, ifn

csound doc: http://csound.com/docs/manual/tradsyn.html

tabifd :: Sig -> Sig -> Sig -> D -> D -> D -> Tab -> (Spec, Spec)

Instantaneous Frequency Distribution, magnitude and phase analysis.

The tabifd opcode takes an input function table and performs an Instantaneous Frequency, magnitude and phase analysis, using the STFT and tabifd (Instantaneous Frequency Distribution), as described in Lazzarini et al, "Time-stretching using the Instantaneous Frequency Distribution and Partial Tracking", Proc.of ICMC05, Barcelona. It generates two PV streaming signals, one containing the amplitudes and frequencies (a similar output to pvsanal) and another containing amplitudes and unwrapped phases.

ffr,fphs  tabifd  ktimpt, kamp, kpitch, ifftsize, ihopsize, iwintype,ifn

csound doc: http://csound.com/docs/manual/tabifd.html

sinsyn :: Spec -> Sig -> Sig -> Tab -> Sig

Streaming partial track additive synthesis with cubic phase interpolation

The sinsyn opcode takes an input containg a TRACKS pv streaming signal (as generated, for instance by the partials opcode). It resynthesises the signal using linear amplitude and cubic phase interpolation to drive a bank of interpolating oscillators with amplitude scaling control. sinsyn attempts to preserve the phase of the partials in the original signal and in so doing it does not allow for pitch or timescale modifications of the signal.

asig  sinsyn  fin, kscal, kmaxtracks, ifn

csound doc: http://csound.com/docs/manual/sinsyn.html

resyn :: Spec -> Sig -> Sig -> Sig -> Tab -> Sig

Streaming partial track additive synthesis with cubic phase interpolation with pitch control and support for timescale-modified input

The resyn opcode takes an input containg a TRACKS pv streaming signal (as generated, for instance by partials). It resynthesises the signal using linear amplitude and cubic phase interpolation to drive a bank of interpolating oscillators with amplitude and pitch scaling controls. Resyn is a modified version of sinsyn, allowing for the resynthesis of data with pitch and timescale changes.

asig  resyn  fin, kscal, kpitch, kmaxtracks, ifn

csound doc: http://csound.com/docs/manual/resyn.html

pvsynth :: Spec -> Sig

Resynthesise using a FFT overlap-add.

Resynthesise phase vocoder data (f-signal) using a FFT overlap-add.

ares  pvsynth  fsrc, [iinit]

csound doc: http://csound.com/docs/manual/pvsynth.html

pvswarp :: Spec -> Sig -> Sig -> Spec

Warp the spectral envelope of a PVS signal

Warp the spectral envelope of a PVS signal by means of shifting and scaling.

fsig  pvswarp  fsigin, kscal, kshift[, klowest, kmeth, kgain, kcoefs]

csound doc: http://csound.com/docs/manual/pvswarp.html

pvsvoc :: Spec -> Spec -> Sig -> Sig -> Spec

Combine the spectral envelope of one fsig with the excitation (frequencies) of another.

This opcode provides support for cross-synthesis of amplitudes and frequencies. It takes the amplitudes of one input fsig and combines with frequencies from another. It is a spectral version of the well-known channel vocoder.

fsig  pvsvoc  famp, fexc, kdepth, kgain [,kcoefs]

csound doc: http://csound.com/docs/manual/pvsvoc.html

pvstrace :: Spec -> Sig -> Spec

Retain only the N loudest bins.

Process a PV stream by retaining only the N bins with the highest amplitude, zeroing the others.

fsig  pvstrace  fsigin, kn 

csound doc: http://csound.com/docs/manual/pvstrace.html

pvstencil :: Spec -> Sig -> Sig -> D -> Spec

Transforms a pvoc stream according to a masking function table.

Transforms a pvoc stream according to a masking function table; if the pvoc stream amplitude falls below the value of the function for a specific pvoc channel, it applies a gain to that channel.

fsig  pvstencil  fsigin, kgain, klevel, iftable

csound doc: http://csound.com/docs/manual/pvstencil.html

pvstanal :: Sig -> Sig -> Sig -> Tab -> Spec

Phase vocoder analysis processing with onset detection/processing.

pvstanal implements phase vocoder analysis by reading function tables containing sampled-sound sources, with GEN01, and pvstanal will accept deferred allocation tables.

fsig  pvstanal  ktimescal, kamp, kpitch, ktab, [kdetect, kwrap, ioffset,ifftsize, ihop, idbthresh]
          

csound doc: http://csound.com/docs/manual/pvstanal.html

pvspitch :: Spec -> Sig -> (Sig, Sig)

Track the pitch and amplitude of a PVS signal.

Track the pitch and amplitude of a PVS signal as k-rate variables.

kfr, kamp  pvspitch  fsig, kthresh

csound doc: http://csound.com/docs/manual/pvspitch.html

pvsout :: Spec -> Sig -> SE ()

Write a fsig to the pvs output bus.

This opcode writes a fsig to a channel of the pvs output bus. Note that the pvs out bus and the pvs in bus are separate and independent. A new channel is created if non-existent.

 pvsout  fsig, kchan

csound doc: http://csound.com/docs/manual/pvsout.html

pvsosc :: Sig -> Sig -> Sig -> D -> Spec

PVS-based oscillator simulator.

Generates periodic signal spectra in AMP-FREQ format, with the option of four wave types:

fsig  pvsosc  kamp, kfreq, ktype, isize [,ioverlap] [, iwinsize] [, iwintype] [, iformat]

csound doc: http://csound.com/docs/manual/pvsosc.html

pvsmorph :: Spec -> Spec -> Sig -> Sig -> Spec

Performs morphing (or interpolation) between two source fsigs.

Performs morphing (or interpolation) between two source fsigs.

fsig  pvsmorph  fsig1, fsig2, kampint, kfrqint

csound doc: http://csound.com/docs/manual/pvsmorph.html

pvsmooth :: Spec -> Sig -> Sig -> Spec

Smooth the amplitude and frequency time functions of a pv stream using parallel 1st order lowpass IIR filters with time-varying cutoff frequency.

Smooth the amplitude and frequency time functions of a pv stream using a 1st order lowpass IIR with time-varying cutoff frequency. This opcode uses the same filter as the tone opcode, but this time acting separately on the amplitude and frequency time functions that make up a pv stream. The cutoff frequency parameter runs at the control-rate, but unlike tone and tonek, it is not specified in Hz, but as fractions of 1/2 frame-rate (actually the pv stream sampling rate), which is easier to understand. This means that the highest cutoff frequency is 1 and the lowest 0; the lower the frequency the smoother the functions and more pronounced the effect will be.

fsig  pvsmooth  fsigin, kacf, kfcf

csound doc: http://csound.com/docs/manual/pvsmooth.html

pvsmix :: Spec -> Spec -> Spec

Mix seamlessly two pv signals.

Mix seamlessly two pv signals. This opcode combines the most prominent components of two pvoc streams into a single mixed stream.

fsig  pvsmix  fsigin1, fsigin2

csound doc: http://csound.com/docs/manual/pvsmix.html

pvsmaska :: Spec -> Tab -> Sig -> Spec

Modify amplitudes using a function table, with dynamic scaling.

Modify amplitudes of fsrc using function table, with dynamic scaling.

fsig  pvsmaska  fsrc, ifn, kdepth

csound doc: http://csound.com/docs/manual/pvsmaska.html

pvslock :: Spec -> Sig -> Spec

Frequency lock an input fsig

This opcode searches for spectral peaks and then locks the frequencies around those peaks. This is similar to phase-locking in non-streaming PV processing. It can be used to improve timestretching and pitch-shifting quality in PV processing.

fsig  pvslock  fsigin, klock

csound doc: http://csound.com/docs/manual/pvslock.html

pvsinit :: D -> Spec

Initialise a spectral (f) variable to zero.

Performs the equivalent to an init operation on an f-variable.

fsig  pvsinit  isize[, iolap, iwinsize, iwintype, iformat]

csound doc: http://csound.com/docs/manual/pvsinit.html

pvsinfo :: Spec -> (D, D, D, D)

Get information from a PVOC-EX formatted source.

Get format information about fsrc, whether created by an opcode such as pvsanal, or obtained from a PVOCEX file by pvsfread. This information is available at init time, and can be used to set parameters for other pvs opcodes, and in particular for creating function tables (e.g. for pvsftw), or setting the number of oscillators for pvsadsyn.

ioverlap, inumbins, iwinsize, iformat  pvsinfo  fsrc

csound doc: http://csound.com/docs/manual/pvsinfo.html

pvsin :: Sig -> Spec

Retrieve an fsig from the input software bus; a pvs equivalent to chani.

This opcode retrieves an f-sig from the pvs in software bus, which can be used to get data from an external source, using the Csound 5 API. A channel is created if not already existing. The fsig channel is in that case initialised with the given parameters. It is important to note that the pvs input and output (pvsout opcode) busses are independent and data is not shared between them.

fsig  pvsin  kchan[, isize, iolap, iwinsize, iwintype, iformat]

csound doc: http://csound.com/docs/manual/pvsin.html

pvsifd :: Sig -> D -> D -> D -> (Spec, Spec)

Instantaneous Frequency Distribution, magnitude and phase analysis.

The pvsifd opcode takes an input a-rate signal and performs an Instantaneous Frequency, magnitude and phase analysis, using the STFT and pvsifd (Instantaneous Frequency Distribution), as described in Lazzarini et al, "Time-stretching using the Instantaneous Frequency Distribution and Partial Tracking", Proc.of ICMC05, Barcelona. It generates two PV streaming signals, one containing the amplitudes and frequencies (a similar output to pvsanal) and another containing amplitudes and unwrapped phases.

ffr,fphs  pvsifd  ain, ifftsize, ihopsize, iwintype[,iscal]

csound doc: http://csound.com/docs/manual/pvsifd.html

pvshift :: Spec -> Sig -> Sig -> Spec

Shift the frequency components of a pv stream, stretching/compressing its spectrum.

fsig  pvshift  fsigin, kshift, klowest[, kkeepform, igain, kcoefs]

csound doc: http://csound.com/docs/manual/pvshift.html

pvsgain :: Spec -> Sig -> Spec

Scale the amplitude of a pv stream.

fsig  pvsgain  fsigin, kgain 

csound doc: http://csound.com/docs/manual/pvsgain.html

pvsfwrite :: Spec -> Str -> SE ()

Write a fsig to a PVOCEX file.

This opcode writes a fsig to a PVOCEX file (which in turn can be read by pvsfread or other programs that support PVOCEX file input).

 pvsfwrite  fsig, ifile

csound doc: http://csound.com/docs/manual/pvsfwrite.html

pvsftw :: Spec -> Tab -> Sig

Writes amplitude and/or frequency data to function tables.

kflag  pvsftw  fsrc, ifna [, ifnf]

csound doc: http://csound.com/docs/manual/pvsftw.html

pvsftr :: Spec -> Tab -> SE ()

Reads amplitude and/or frequency data from function tables.

 pvsftr  fsrc, ifna [, ifnf]

csound doc: http://csound.com/docs/manual/pvsftr.html

pvsfreeze :: Spec -> Sig -> Sig -> Spec

Freeze the amplitude and frequency time functions of a pv stream according to a control-rate trigger.

This opcodes freezes the evolution of pvs stream by locking into steady amplitude and/or frequency values for each bin. The freezing is controlled, independently for amplitudes and frequencies, by a control-rate trigger, which switches the freezing on if equal to or above 1 and off if below 1.

fsig  pvsfreeze  fsigin, kfreeza, kfreezf

csound doc: http://csound.com/docs/manual/pvsfreeze.html

pvsfread :: Sig -> Tab -> Spec

Read a selected channel from a PVOC-EX analysis file.

Create an fsig stream by reading a selected channel from a PVOC-EX analysis file loaded into memory, with frame interpolation. Only format 0 files (amplitude+frequency) are currently supported. The operation of this opcode mirrors that of pvoc, but outputs an fsig instead of a resynthesized signal.

fsig  pvsfread  ktimpt, ifn [, ichan]

csound doc: http://csound.com/docs/manual/pvsfread.html

pvsfilter :: Spec -> Spec -> Sig -> Spec

Multiply amplitudes of a pvoc stream by those of a second pvoc stream, with dynamic scaling.

fsig  pvsfilter  fsigin, fsigfil, kdepth[, igain]

csound doc: http://csound.com/docs/manual/pvsfilter.html

pvsdisp :: Spec -> SE ()

Displays a PVS signal as an amplitude vs. freq graph.

This opcode will display a PVS signal fsig. Uses X11 or FLTK windows if enabled, else (or if -g flag is set) displays are approximated in ASCII characters.

 pvsdisp  fsig[, ibins, iwtflg] 

csound doc: http://csound.com/docs/manual/pvsdisp.html

pvsdiskin :: Str -> Sig -> Sig -> Spec

Read a selected channel from a PVOC-EX analysis file.

Create an fsig stream by reading a selected channel from a PVOC-EX analysis file, with frame interpolation.

fsig  pvsdiskin  SFname,ktscal,kgain[,ioffset, ichan]

csound doc: http://csound.com/docs/manual/pvsdiskin.html

pvsdemix :: Spec -> Spec -> Sig -> Sig -> D -> Spec

Spectral azimuth-based de-mixing of stereo sources.

Spectral azimuth-based de-mixing of stereo sources, with a reverse-panning result. This opcode implements the Azimuth Discrimination and Resynthesis (ADRess) algorithm, developed by Dan Barry (Barry et Al. "Sound Source Separation Azimuth Discrimination and Resynthesis". DAFx'04, Univ. of Napoli). The source separation, or de-mixing, is controlled by two parameters: an azimuth position (kpos) and a subspace width (kwidth). The first one is used to locate the spectral peaks of individual sources on a stereo mix, whereas the second widens the 'search space', including/exclufing the peaks around kpos. These two parameters can be used interactively to extract source sounds from a stereo mix. The algorithm is particularly successful with studio recordings where individual instruments occupy individual panning positions; it is, in fact, a reverse-panning algorithm.

fsig  pvsdemix  fleft, fright, kpos, kwidth, ipoints

csound doc: http://csound.com/docs/manual/pvsdemix.html

pvscross :: Spec -> Spec -> Sig -> Sig -> Spec

Performs cross-synthesis between two source fsigs.

fsig  pvscross  fsrc, fdest, kamp1, kamp2

csound doc: http://csound.com/docs/manual/pvscross.html

pvsceps :: Spec -> Sig

Calculate the cepstrum of a pvs input, optionally liftering coefficients.

pvscent :: Spec -> Sig

Calculate the spectral centroid of a signal.

Calculate the spectral centroid of a signal from its discrete Fourier transform.

kcent  pvscent  fsig

csound doc: http://csound.com/docs/manual/pvscent.html

pvscale :: Spec -> Sig -> Spec

Scale the frequency components of a pv stream.

Scale the frequency components of a pv stream, resulting in pitch shift. Output amplitudes can be optionally modified in order to attempt formant preservation.

fsig  pvscale  fsigin, kscal[, kkeepform, kgain, kcoefs]

csound doc: http://csound.com/docs/manual/pvscale.html

pvsbufread2 :: Sig -> Sig -> D -> D -> Spec

This opcode reads a circular buffer of f-signals (streaming PV signals), with binwise additional delays.

This opcode reads from a circular buffer of length ilen (secs), taking a handle for the buffer and a time pointer, which holds the current read position (also in seconds). It is used in conjunction with a pvsbuffer opocde. Reading is circular, wrapping around at the end of the buffer. Extra delay times are taken from a function table, with each point on it defining a delay time in seconds affecting the corresponding bin.

fsig  pvsbufread2   ktime, khandle, ift1, ift2 

csound doc: http://csound.com/docs/manual/pvsbufread2.html

pvsbufread :: Sig -> Sig -> Spec

This opcode reads a circular buffer of f-signals (streaming PV signals).

This opcode reads from a circular buffer of length ilen (secs), taking a handle for the buffer and a time pointer, which holds the current read position (also in seconds). It is used in conjunction with a pvsbuffer opocde. Reading is circular, wrapping around at the end of the buffer.

fsig  pvsbufread   ktime, khandle[, ilo, ihi, iclear] 

csound doc: http://csound.com/docs/manual/pvsbufread.html

pvsbuffer :: Spec -> D -> (D, Sig)

This opcode creates and writes to a circular buffer for f-signals (streaming PV signals).

This opcode sets up and writes to a circular buffer of length ilen (secs), giving a handle for the buffer and a time pointer, which holds the current write position (also in seconds). It can be used with one or more pvsbufread opcodes. Writing is circular, wrapping around at the end of the buffer.

ihandle, ktime   pvsbuffer  fsig, ilen 

csound doc: http://csound.com/docs/manual/pvsbuffer.html

pvsblur :: Spec -> Sig -> D -> Spec

Average the amp/freq time functions of each analysis channel for a specified time.

Average the amp/freq time functions of each analysis channel for a specified time (truncated to number of frames). As a side-effect the input pvoc stream will be delayed by that amount.

fsig  pvsblur  fsigin, kblurtime, imaxdel

csound doc: http://csound.com/docs/manual/pvsblur.html

pvsbin :: Spec -> Sig -> (Sig, Sig)

Obtain the amp and freq values off a PVS signal bin.

Obtain the amp and freq values off a PVS signal bin as k-rate variables.

kamp, kfr  pvsbin  fsig, kbin

csound doc: http://csound.com/docs/manual/pvsbin.html

pvsbandr :: Spec -> Sig -> Sig -> Sig -> Sig -> Spec

A band reject filter working in the spectral domain.

Filter the pvoc frames, rejecting bins whose frequency is within a band, and with linear interpolation for transitional bands.

fsig  pvsbandr  fsigin, xlowcut, xlowfull, \
          xhighfull, xhighcut[, ktype]

csound doc: http://csound.com/docs/manual/pvsbandr.html

pvsbandp :: Spec -> Sig -> Sig -> Sig -> Sig -> Spec

A band pass filter working in the spectral domain.

Filter the pvoc frames, passing bins whose frequency is within a band, and with linear interpolation for transitional bands.

fsig  pvsbandp  fsigin, xlowcut, xlowfull, \
          xhighfull, xhighcut[, ktype]

csound doc: http://csound.com/docs/manual/pvsbandp.html

pvsarp :: Spec -> Sig -> Sig -> Sig -> Spec

Arpeggiate the spectral components of a streaming pv signal.

This opcode arpeggiates spectral components, by amplifying one bin and attenuating all the others around it. Used with an LFO it will provide a spectral arpeggiator similar to Trevor Wishart's CDP program specarp.

fsig  pvsarp  fsigin, kbin, kdepth, kgain

csound doc: http://csound.com/docs/manual/pvsarp.html

pvsanal :: Sig -> D -> D -> D -> D -> Spec

Generate an fsig from a mono audio source ain, using phase vocoder overlap-add analysis.

fsig  pvsanal  ain, ifftsize, ioverlap, iwinsize, iwintype [, iformat] [, iinit]

csound doc: http://csound.com/docs/manual/pvsanal.html

pvsadsyn :: Spec -> D -> Sig -> Sig

Resynthesize using a fast oscillator-bank.

ares  pvsadsyn  fsrc, inoscs, kfmod [, ibinoffset] [, ibinincr] [, iinit]

csound doc: http://csound.com/docs/manual/pvsadsyn.html

partials :: Spec -> Spec -> Sig -> Sig -> Sig -> D -> Spec

Partial track spectral analysis.

The partials opcode takes two input PV streaming signals containg AMP_FREQ and AMP_PHASE signals (as generated for instance by pvsifd or in the first case, by pvsanal) and performs partial track analysis, as described in Lazzarini et al, "Time-stretching using the Instantaneous Frequency Distribution and Partial Tracking", Proc.of ICMC05, Barcelona. It generates a TRACKS PV streaming signal, containing amplitude, frequency, phase and track ID for each output track. This type of signal will contain a variable number of output tracks, up to the total number of analysis bins contained in the inputs (fftsize/2 + 1 bins). The second input (AMP_PHASE) is optional, as it can take the same signal as the first input. In this case, however, all phase information will be NULL and resynthesis using phase information cannot be performed.

ftrks  partials  ffr, fphs, kthresh, kminpts, kmaxgap, imaxtracks

csound doc: http://csound.com/docs/manual/partials.html

cudasynth :: Sig -> Sig -> Tab -> D -> D -> Sig

Synthesis by additive synthesis and inverse FFT. Experimental and only available as source code at the moment.

Synthesis by additive synthesis and inverse FFT.

asig  cudasynth  kamp, kfreq, itab, iftab, iatab[, inum]
asig  cudasynth  fsig, kamp, kfreq[, inum]
asig  cudasynth  fsig

csound doc: http://csound.com/docs/manual/cudasynth.html

cudasliding :: Sig -> Sig -> D -> Sig

Perform sliding phase vocoder algorithm with simplified transformational FM using GPU hardware. Experimental and only available as source code at the moment.

Perform sliding phase vocoder algorithm with simplified transformational FM using GPU hardware.

asig  cudasliding  ain, amod, iwinsize

csound doc: http://csound.com/docs/manual/cudasliding.html

cudanal :: Sig -> D -> D -> D -> D -> Spec

Generate an fsig from a mono audio source ain, using phase vocoder overlap-add analysis and GPU hardware. Experimental and only available as source code at the moment.

Generate an fsig from a mono audio source ain, using phase vocoder overlap-add analysis and GPU hardware.

fsig  cudanal  ain, ifftsize, ioverlap, iwinsize, iwintype [, iformat] [, iinit]

csound doc: http://csound.com/docs/manual/cudanal.html

binit :: Spec -> D -> Spec

PVS tracks to amplitude+frequency conversion.

The binit opcode takes an input containg a TRACKS pv streaming signal (as generated, for instance by partials) and converts it into a equal-bandwidth bin-frame containing amplitude and frequency pairs (PVS_AMP_FREQ), suitable for overlap-add resynthesis (such as performed by pvsynth) or further PVS streaming phase vocoder signal transformations. For each frequency bin, it will look for a suitable track signal to fill it; if not found, the bin will be empty (0 amplitude). If more than one track fits a certain bin, the one with highest amplitude will be chosen. This means that not all of the input signal is actually binned, the operation is lossy. However, in many situations this loss is not perceptually relevant.

fsig  binit  fin, isize

csound doc: http://csound.com/docs/manual/binit.html

spectrum :: Sig -> D -> D -> D -> Wspec

Generate a constant-Q, exponentially-spaced DFT.

Generate a constant-Q, exponentially-spaced DFT across all octaves of a multiply-downsampled control or audio input signal.

wsig  spectrum  xsig, iprd, iocts, ifrqa [, iq] [, ihann] [, idbout] \
          [, idsprd] [, idsinrs]

csound doc: http://csound.com/docs/manual/spectrum.html

specsum :: Wspec -> Sig

Sums the magnitudes across all channels of the spectrum.

ksum  specsum  wsig [, interp]

csound doc: http://csound.com/docs/manual/specsum.html

specscal :: Wspec -> D -> D -> Wspec

Scales an input spectral datablock with spectral envelopes.

wsig  specscal  wsigin, ifscale, ifthresh

csound doc: http://csound.com/docs/manual/specscal.html

specptrk :: Wspec -> Sig -> D -> D -> D -> D -> D -> D -> (Sig, Sig)

Estimates the pitch of the most prominent complex tone in the spectrum.

Estimate the pitch of the most prominent complex tone in the spectrum.

koct, kamp  specptrk  wsig, kvar, ilo, ihi, istr, idbthresh, inptls, \
          irolloff [, iodd] [, iconfs] [, interp] [, ifprd] [, iwtflg]

csound doc: http://csound.com/docs/manual/specptrk.html

spechist :: Wspec -> Wspec

Accumulates the values of successive spectral frames.

wsig  spechist  wsigin

csound doc: http://csound.com/docs/manual/spechist.html

specfilt :: Wspec -> D -> Wspec

Filters each channel of an input spectrum.

wsig  specfilt  wsigin, ifhtim

csound doc: http://csound.com/docs/manual/specfilt.html

specdisp :: Wspec -> D -> SE ()

Displays the magnitude values of the spectrum.

 specdisp  wsig, iprd [, iwtflg]

csound doc: http://csound.com/docs/manual/specdisp.html

specdiff :: Wspec -> Wspec

Finds the positive difference values between consecutive spectral frames.

wsig  specdiff  wsigin

csound doc: http://csound.com/docs/manual/specdiff.html

specaddm :: Wspec -> Wspec -> Wspec

Perform a weighted add of two input spectra.

wsig  specaddm  wsig1, wsig2 [, imul2]

csound doc: http://csound.com/docs/manual/specaddm.html

lpslot :: D -> SE ()

Selects the slot to be use by further lp opcodes.

 lpslot  islot

csound doc: http://csound.com/docs/manual/lpslot.html

lpreson :: Sig -> Sig

Resynthesises a signal from the data passed internally by a previous lpread.

ares  lpreson  asig

csound doc: http://csound.com/docs/manual/lpreson.html

lpread :: Sig -> Str -> (Sig, Sig, Sig, Sig)

Reads a control file of time-ordered information frames.

krmsr, krmso, kerr, kcps  lpread  ktimpnt, ifilcod [, inpoles] [, ifrmrate]

csound doc: http://csound.com/docs/manual/lpread.html

lpinterp :: D -> D -> Sig -> SE ()

Computes a new set of poles from the interpolation between two analysis.

 lpinterp  islot1, islot2, kmix

csound doc: http://csound.com/docs/manual/lpinterp.html

lpfreson :: Sig -> Sig -> Sig

Resynthesises a signal from the data passed internally by a previous lpread, applying formant shifting.

ares  lpfreson  asig, kfrqratio

csound doc: http://csound.com/docs/manual/lpfreson.html

vpvoc :: Sig -> Sig -> Str -> Sig

Implements signal reconstruction using an fft-based phase vocoder and an extra envelope.

ares  vpvoc  ktimpnt, kfmod, ifile [, ispecwp] [, ifn]

csound doc: http://csound.com/docs/manual/vpvoc.html

tablexseg :: Tab -> D -> Tab -> SE ()

Creates a new function table by making exponential segments between values in stored function tables.

tablexseg is like expseg but interpolate between values in a stored function tables. The result is a new function table passed internally to any following vpvoc which occurs before a subsequent tablexseg (much like lpread/lpreson pairs work). The uses of these are described below under vpvoc.

 tablexseg  ifn1, idur1, ifn2 [, idur2] [, ifn3] [...]

csound doc: http://csound.com/docs/manual/tablexseg.html

tableseg :: Tab -> D -> Tab -> SE ()

Creates a new function table by making linear segments between values in stored function tables.

tableseg is like linseg but interpolate between values in a stored function tables. The result is a new function table passed internally to any following vpvoc which occurs before a subsequent tableseg (much like lpread/lpreson pairs work). The uses of these are described below under vpvoc.

 tableseg  ifn1, idur1, ifn2 [, idur2] [, ifn3] [...]

csound doc: http://csound.com/docs/manual/tableseg.html

pvread :: Sig -> Str -> D -> (Sig, Sig)

Reads from a phase vocoder analysis file and returns the frequency and amplitude from a single analysis channel or bin.

pvread reads from a pvoc file and returns the frequency and amplitude from a single analysis channel or bin. The returned values can be used anywhere else in the Csound instrument. For example, one can use them as arguments to an oscillator to synthesize a single component from an analyzed signal or a bank of pvreads can be used to resynthesize the analyzed sound using additive synthesis by passing the frequency and magnitude values to a bank of oscillators.

kfreq, kamp  pvread  ktimpnt, ifile, ibin

csound doc: http://csound.com/docs/manual/pvread.html

pvoc :: Sig -> Sig -> Str -> Sig

Implements signal reconstruction using an fft-based phase vocoder.

ares  pvoc  ktimpnt, kfmod, ifilcod [, ispecwp] [, iextractmode] \
          [, ifreqlim] [, igatefn]

csound doc: http://csound.com/docs/manual/pvoc.html

pvinterp :: Sig -> Sig -> Str -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Interpolates between the amplitudes and frequencies of two phase vocoder analysis files.

pvinterp interpolates between the amplitudes and frequencies, on a bin by bin basis, of two phase vocoder analysis files (one from a previously called pvbufread unit and the other from within its own argument list), allowing for user defined transitions between analyzed sounds. It also allows for general scaling of the amplitudes and frequencies of each file separately before the interpolated values are calculated and sent to the resynthesis routines. The kfmod argument in pvinterp performs its frequency scaling on the frequency values after their derivation from the separate scaling and subsequent interpolation is performed so that this acts as an overall scaling value of the new frequency components.

ares  pvinterp  ktimpnt, kfmod, ifile, kfreqscale1, kfreqscale2, \
          kampscale1, kampscale2, kfreqinterp, kampinterp

csound doc: http://csound.com/docs/manual/pvinterp.html

pvcross :: Sig -> Sig -> Str -> Sig -> Sig -> Sig

Applies the amplitudes from one phase vocoder analysis file to the data from a second file.

pvcross applies the amplitudes from one phase vocoder analysis file to the data from a second file and then performs the resynthesis. The data is passed, as described above, from a previously called pvbufread unit. The two k-rate amplitude arguments are used to scale the amplitudes of each files separately before they are added together and used in the resynthesis (see below for further explanation). The frequencies of the first file are not used at all in this process. This unit simply allows for cross-synthesis through the application of the amplitudes of the spectra of one signal to the frequencies of a second signal. Unlike pvinterp, pvcross does allow for the use of the ispecwp as in pvoc and vpvoc.

ares  pvcross  ktimpnt, kfmod, ifile, kampscale1, kampscale2 [, ispecwp]

csound doc: http://csound.com/docs/manual/pvcross.html

pvbufread :: Sig -> Str -> SE ()

Reads from a phase vocoder analysis file and makes the retrieved data available.

pvbufread reads from a pvoc file and makes the retrieved data available to any following pvinterp and pvcross units that appear in an instrument before a subsequent pvbufread (just as lpread and lpreson work together). The data is passed internally and the unit has no output of its own.

 pvbufread  ktimpnt, ifile

csound doc: http://csound.com/docs/manual/pvbufread.html

pvadd :: Sig -> Sig -> Str -> Tab -> D -> Sig

Reads from a pvoc file and uses the data to perform additive synthesis.

pvadd reads from a pvoc file and uses the data to perform additive synthesis using an internal array of interpolating oscillators. The user supplies the wave table (usually one period of a sine wave), and can choose which analysis bins will be used in the re-synthesis.

ares  pvadd  ktimpnt, kfmod, ifilcod, ifn, ibins [, ibinoffset] \
          [, ibinincr] [, iextractmode] [, ifreqlim] [, igatefn]

csound doc: http://csound.com/docs/manual/pvadd.html

ktableseg :: Tab -> D -> Tab -> SE ()

Deprecated.

Deprecated. Use the tableseg opcode instead.

 ktableseg  ifn1, idur1, ifn2 [, idur2] [, ifn3] [...]

csound doc: http://csound.com/docs/manual/ktableseg.html

minaccum :: Sig -> Sig -> SE ()

Accumulates the minimum value of audio signals.

minaccum compares two audio-rate variables and stores the minimum value between them into the first.

 minaccum  aAccumulator, aInput

csound doc: http://csound.com/docs/manual/minaccum.html

minabsaccum :: Sig -> Sig -> SE ()

Accumulates the minimum of the absolute values of audio signals.

minabsaccum compares two audio-rate variables and stores the minimum of their absolute values into the first.

 minabsaccum  aAccumulator, aInput

csound doc: http://csound.com/docs/manual/minabsaccum.html

minabs :: [Sig] -> Sig

Produces a signal that is the minimum of the absolute values of any number of input signals.

The minabs opcode takes any number of a-rate or k-rate signals as input (all of the same rate), and outputs a signal at the same rate that is the minimum of all of the inputs. It is identical to the min opcode except that it takes the absolute value of each input before comparing them. Therefore, the output is always non-negative. For a-rate signals, the inputs are compared one sample at a time (i.e. minabs does not scan an entire ksmps period of a signal for its local minimum as the max_k opcode does).

amin  minabs  ain1, ain2 [, ain3] [, ain4] [...]
kmin  minabs  kin1, kin2 [, kin3] [, kin4] [...]

csound doc: http://csound.com/docs/manual/minabs.html

min' :: [Sig] -> Sig

Produces a signal that is the minimum of any number of input signals.

The min opcode takes any number of a-rate, k-rate or i-rate signals as input (all of the same rate), and outputs a signal at the same rate that is the minimum of all of the inputs. For a-rate signals, the inputs are compared one sample at a time (i.e. min does not scan an entire ksmps period of a signal for its local minimum as the max_k opcode does).

amin  min  ain1, ain2 [, ain3] [, ain4] [...]
kmin  min  kin1, kin2 [, kin3] [, kin4] [...]
imin  min  iin1, iin2 [, iin3] [, iin4] [...]

csound doc: http://csound.com/docs/manual/min.html

maxaccum :: Sig -> Sig -> SE ()

Accumulates the maximum value of audio signals.

maxaccum compares two audio-rate variables and stores the maximum value between them into the first.

 maxaccum  aAccumulator, aInput

csound doc: http://csound.com/docs/manual/maxaccum.html

maxabsaccum :: Sig -> Sig -> SE ()

Accumulates the maximum of the absolute values of audio signals.

maxabsaccum compares two audio-rate variables and stores the maximum of their absolute values into the first.

 maxabsaccum  aAccumulator, aInput

csound doc: http://csound.com/docs/manual/maxabsaccum.html

maxabs :: [Sig] -> Sig

Produces a signal that is the maximum of the absolute values of any number of input signals.

The maxabs opcode takes any number of a-rate or k-rate signals as input (all of the same rate), and outputs a signal at the same rate that is the maximum of all of the inputs. It is identical to the max opcode except that it takes the absolute value of each input before comparing them. Therefore, the output is always non-negative. For a-rate signals, the inputs are compared one sample at a time (i.e. maxabs does not scan an entire ksmps period of a signal for its local maximum as the max_k opcode does).

amax  maxabs  ain1, ain2 [, ain3] [, ain4] [...]
kmax  maxabs  kin1, kin2 [, kin3] [, kin4] [...]

csound doc: http://csound.com/docs/manual/maxabs.html

max_k :: Sig -> Sig -> D -> Sig

Local maximum (or minimum) value of an incoming asig signal

max_k outputs the local maximum (or minimum) value of the incoming asig signal, checked in the time interval between ktrig has become true twice.

knumkout  max_k  asig, ktrig, itype

csound doc: http://csound.com/docs/manual/max_k.html

max' :: [Sig] -> Sig

Produces a signal that is the maximum of any number of input signals.

The max opcode takes any number of a-rate, k-rate or i-rate signals as input (all of the same rate), and outputs a signal at the same rate that is the maximum of all of the inputs. For a-rate signals, the inputs are compared one sample at a time (i.e. max does not scan an entire ksmps period of a signal for its local maximum as the max_k opcode does).

amax  max  ain1, ain2 [, ain3] [, ain4] [...]
kmax  max  kin1, kin2 [, kin3] [, kin4] [...]
imax  max  iin1, iin2 [, iin3] [, iin4] [...]

csound doc: http://csound.com/docs/manual/max.html

cmp :: Sig -> Str -> Sig -> Sig

Compares two audio signals

Compares two audio signals using the standard math operators

aout  cmp  aL, S_operator, aR

csound doc: http://csound.com/docs/manual/cmp.html

powershape :: Sig -> Sig -> Sig

Waveshapes a signal by raising it to a variable exponent.

The powershape opcode raises an input signal to a power with pre- and post-scaling of the signal so that the output will be in a predictable range. It also processes negative inputs in a symmetrical way to positive inputs, calculating a dynamic transfer function that is useful for waveshaping.

aout  powershape  ain, kShapeAmount [, ifullscale]

csound doc: http://csound.com/docs/manual/powershape.html

pdhalfy :: Sig -> Sig -> Sig

Distorts a phasor for reading two unequal portions of a table in equal periods.

The pdhalfy opcode is a variation on the phase distortion synthesis method of the pdhalf opcode. It is useful for distorting a phasor in order to read two unequal portions of a table in the same number of samples.

aout  pdhalfy  ain, kShapeAmount [, ibipolar [, ifullscale]]

csound doc: http://csound.com/docs/manual/pdhalfy.html

pdhalf :: Sig -> Sig -> Sig

Distorts a phasor for reading the two halves of a table at different rates.

The pdhalf opcode is designed to emulate the "classic" phase distortion synthesis method of the Casio CZ-series of synthesizers from the mid-1980's. This technique reads the first and second halves of a function table at different rates in order to warp the waveform. For example, pdhalf can smoothly transform a sine wave into something approximating the shape of a saw wave.

aout  pdhalf  ain, kShapeAmount [, ibipolar [, ifullscale]]

csound doc: http://csound.com/docs/manual/pdhalf.html

pdclip :: Sig -> Sig -> Sig -> Sig

Performs linear clipping on an audio signal or a phasor.

The pdclip opcode allows a percentage of the input range of a signal to be clipped to fullscale. It is similar to simply multiplying the signal and limiting the range of the result, but pdclip allows you to think about how much of the signal range is being distorted instead of the scalar factor and has a offset parameter for assymetric clipping of the signal range. pdclip is also useful for remapping phasors for phase distortion synthesis.

aout  pdclip  ain, kWidth, kCenter [, ibipolar [, ifullscale]]

csound doc: http://csound.com/docs/manual/pdclip.html

chebyshevpoly :: Sig -> [Sig] -> Sig

Efficiently evaluates the sum of Chebyshev polynomials of arbitrary order.

The chebyshevpoly opcode calculates the value of a polynomial expression with a single a-rate input variable that is made up of a linear combination of the first N Chebyshev polynomials of the first kind. Each Chebyshev polynomial, Tn(x), is weighted by a k-rate coefficient, kn, so that the opcode is calculating a sum of any number of terms in the form kn*Tn(x). Thus, the chebyshevpoly opcode allows for the waveshaping of an audio signal with a dynamic transfer function that gives precise control over the harmonic content of the output.

aout  chebyshevpoly  ain, k0 [, k1 [, k2 [...]]]

csound doc: http://csound.com/docs/manual/chebyshevpoly.html

wguide2 :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

A model of beaten plate consisting of two parallel delay-lines and two first-order lowpass filters.

ares  wguide2  asig, xfreq1, xfreq2, kcutoff1, kcutoff2, \
          kfeedback1, kfeedback2

csound doc: http://csound.com/docs/manual/wguide2.html

wguide1 :: Sig -> Sig -> Sig -> Sig -> Sig

A simple waveguide model consisting of one delay-line and one first-order lowpass filter.

ares  wguide1  asig, xfreq, kcutoff, kfeedback

csound doc: http://csound.com/docs/manual/wguide1.html

zfilter2 :: Sig -> Sig -> Sig -> D -> D -> [D] -> Sig

Performs filtering using a transposed form-II digital filter lattice with radial pole-shearing and angular pole-warping.

General purpose custom filter with time-varying pole control. The filter coefficients implement the following difference equation:

ares  zfilter2  asig, kdamp, kfreq, iM, iN, ib0, ib1, ..., ibM, \
          ia1,ia2, ..., iaN

csound doc: http://csound.com/docs/manual/zfilter2.html

rbjeq :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Parametric equalizer and filter opcode with 7 filter types, based on algorithm by Robert Bristow-Johnson.

Parametric equalizer and filter opcode with 7 filter types, based on algorithm by Robert Bristow-Johnson.

ar  rbjeq  asig, kfco, klvl, kQ, kS[, imode]

csound doc: http://csound.com/docs/manual/rbjeq.html

pareq :: Sig -> Sig -> Sig -> Sig -> Sig

Implementation of Zoelzer's parametric equalizer filters.

Implementation of Zoelzer's parametric equalizer filters, with some modifications by the author.

ares  pareq  asig, kc, kv, kq [, imode] [, iskip]

csound doc: http://csound.com/docs/manual/pareq.html

nlfilt2 :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

A filter with a non-linear effect and blowup protection.

Implements the filter:

ares  nlfilt2  ain, ka, kb, kd, kC, kL

csound doc: http://csound.com/docs/manual/nlfilt2.html

nlfilt :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

A filter with a non-linear effect.

Implements the filter:

ares  nlfilt  ain, ka, kb, kd, kC, kL

csound doc: http://csound.com/docs/manual/nlfilt.html

hilbert2 :: Sig -> D -> D -> (Sig, Sig)

A Hilbert rransformer.

A DFT-based implementation of a Hilbert transformer.

ar1, ar2  hilbert2  asig, ifftsize, ihopsize

csound doc: http://csound.com/docs/manual/hilbert2.html

hilbert :: Sig -> (Sig, Sig)

A Hilbert transformer.

An IIR implementation of a Hilbert transformer.

ar1, ar2  hilbert  asig

csound doc: http://csound.com/docs/manual/hilbert.html

fofilter :: Sig -> Sig -> Sig -> Sig -> Sig

Formant filter.

Fofilter generates a stream of overlapping sinewave grains, when fed with a pulse train. Each grain is the impulse response of a combination of two BP filters. The grains are defined by their attack time (determining the skirtwidth of the formant region at -60dB) and decay time (-6dB bandwidth). Overlapping will occur when 1/freq < decay, but, unlike FOF, there is no upper limit on the number of overlaps. The original idea for this opcode came from J McCartney's formlet class in SuperCollider, but this is possibly implemented differently(?).

asig  fofilter  ain, xcf, xris, xdec[, istor]

csound doc: http://csound.com/docs/manual/fofilter.html

fmanal :: Sig -> Sig -> (Sig, Sig)

AM/FM analysis from quadrature signal.

This opcode attempts to extract the AM and FM signals off a quadrature signal (e.g. from a Hilbert transform).

am, af  fmanal  are, aim

csound doc: http://csound.com/docs/manual/fmanal.html

filter2 :: Sig -> D -> D -> [D] -> Sig

Performs filtering using a transposed form-II digital filter lattice with no time-varying control.

General purpose custom filter with no time-varying pole control. The filter coefficients implement the following difference equation:

ares  filter2  asig, iM, iN, ib0, ib1, ..., ibM, ia1, ia2, ..., iaN
kres  filter2  ksig, iM, iN, ib0, ib1, ..., ibM, ia1, ia2, ..., iaN

csound doc: http://csound.com/docs/manual/filter2.html

eqfil :: Sig -> Sig -> Sig -> Sig -> Sig

Equalizer filter

The opcode eqfil is a 2nd order tunable equalisation filter based on Regalia and Mitra design ("Tunable Digital Frequency Response Equalization Filters", IEEE Trans. on Ac., Sp. and Sig Proc., 35 (1), 1987). It provides a peak/notch filter for building parametric/graphic equalisers.

asig  eqfil  ain, kcf, kbw, kgain[, istor]

csound doc: http://csound.com/docs/manual/eqfil.html

dcblock2 :: Sig -> Sig

A DC blocking filter.

Implements a DC blocking filter with improved DC attenuation.

ares  dcblock2  ain [, iorder] [, iskip]

csound doc: http://csound.com/docs/manual/dcblock2.html

dcblock :: Sig -> Sig

A DC blocking filter.

Implements the DC blocking filter

ares  dcblock  ain [, igain]

csound doc: http://csound.com/docs/manual/dcblock.html

tonek :: Sig -> Sig -> Sig

A first-order recursive low-pass filter with variable frequency response.

kres  tonek  ksig, khp [, iskip]

csound doc: http://csound.com/docs/manual/tonek.html

tlineto :: Sig -> Sig -> Sig -> Sig

Generate glissandos starting from a control signal.

Generate glissandos starting from a control signal with a trigger.

kres  tlineto  ksig, ktime, ktrig

csound doc: http://csound.com/docs/manual/tlineto.html

sc_trig :: Sig -> Sig -> Sig

Timed trigger

Timed trigger. Port of Supercollider's Trig ugen

aout  sc_trig  ain, kdur
kout  sc_trig  kin, kdur

csound doc: http://csound.com/docs/manual/sc_trig.html

sc_lagud :: Sig -> Sig -> Sig -> Sig

Exponential Lag

Exponential lag with different smoothing time for up- and downgoing signals. Port of Supercollider's LagUD

aout  sc_lagud  ain, klagup, klagdown
kout  sc_lagud  kin, klagup, klagdown

csound doc: http://csound.com/docs/manual/sc_lagud.html

sc_lag :: Sig -> Sig -> Sig

Exponential Lag

Exponential lag with 60dB lag time. Port of Supercollider's Lag

aout  sc_lag  ain, klagtime [, initialvalue=0]
kout  sc_lag  kin, klagtime [, initialvalue=0]

csound doc: http://csound.com/docs/manual/sc_lag.html

resonxk :: Sig -> Sig -> Sig -> Sig

Control signal resonant filter stack.

resonxk is equivalent to a group of resonk filters, with the same arguments, serially connected. Using a stack of a larger number of filters allows a sharper cutoff.

kres  resonxk  ksig, kcf, kbw[, inumlayer, iscl, istor]

csound doc: http://csound.com/docs/manual/resonxk.html

resonk :: Sig -> Sig -> Sig -> Sig

A second-order resonant filter.

kres  resonk  ksig, kcf, kbw [, iscl] [, iskip]

csound doc: http://csound.com/docs/manual/resonk.html

portk :: Sig -> Sig -> Sig

Applies portamento to a step-valued control signal.

kres  portk  ksig, khtim [, isig]

csound doc: http://csound.com/docs/manual/portk.html

port :: Sig -> D -> Sig

Applies portamento to a step-valued control signal.

kres  port  ksig, ihtim [, isig]

csound doc: http://csound.com/docs/manual/port.html

lineto :: Sig -> Sig -> Sig

Generate glissandos starting from a control signal.

kres  lineto  ksig, ktime

csound doc: http://csound.com/docs/manual/lineto.html

atonek :: Sig -> Sig -> Sig

A hi-pass filter whose transfer functions are the complements of the tonek opcode.

kres  atonek  ksig, khp [, iskip]

csound doc: http://csound.com/docs/manual/atonek.html

aresonk :: Sig -> Sig -> Sig -> Sig

A notch filter whose transfer functions are the complements of the reson opcode.

kres  aresonk  ksig, kcf, kbw [, iscl] [, iskip]

csound doc: http://csound.com/docs/manual/aresonk.html

vlowres :: Sig -> Sig -> Sig -> D -> Sig -> Sig

A bank of filters in which the cutoff frequency can be separated under user control.

A bank of filters in which the cutoff frequency can be separated under user control

ares  vlowres  asig, kfco, kres, iord, ksep

csound doc: http://csound.com/docs/manual/vlowres.html

tbvcf :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Models some of the filter characteristics of a Roland TB303 voltage-controlled filter.

This opcode attempts to model some of the filter characteristics of a Roland TB303 voltage-controlled filter. Euler's method is used to approximate the system, rather than traditional filter methods. Cutoff frequency, Q, and distortion are all coupled. Empirical methods were used to try to unentwine, but frequency is only approximate as a result. Future fixes for some problems with this opcode may break existing orchestras relying on this version of tbvcf.

ares  tbvcf  asig, xfco, xres, kdist, kasym [, iskip]

csound doc: http://csound.com/docs/manual/tbvcf.html

svfilter :: Sig -> Sig -> Sig -> (Sig, Sig, Sig)

A resonant second order filter, with simultaneous lowpass, highpass and bandpass outputs.

Implementation of a resonant second order filter, with simultaneous lowpass, highpass and bandpass outputs.

alow, ahigh, aband  svfilter   asig, kcf, kq [, iscl] [, iskip]

csound doc: http://csound.com/docs/manual/svfilter.html

statevar :: Sig -> Sig -> Sig -> (Sig, Sig, Sig, Sig)

State-variable filter.

Statevar is a new digital implementation of the analogue state-variable filter. This filter has four simultaneous outputs: high-pass, low-pass, band-pass and band-reject. This filter uses oversampling for sharper resonance (default: 3 times oversampling). It includes a resonance limiter that prevents the filter from getting unstable.

ahp,alp,abp,abr  statevar  ain, xcf, xq [, iosamps, istor]

csound doc: http://csound.com/docs/manual/statevar.html

rezzy :: Sig -> Sig -> Sig -> Sig

A resonant low-pass filter.

ares  rezzy  asig, xfco, xres [, imode, iskip]

csound doc: http://csound.com/docs/manual/rezzy.html

resonz :: Sig -> Sig -> Sig -> Sig

A bandpass filter with variable frequency response.

Implementations of a second-order, two-pole two-zero bandpass filter with variable frequency response.

ares  resonz  asig, xcf, xbw [, iscl] [, iskip]

csound doc: http://csound.com/docs/manual/resonz.html

resony :: Sig -> Sig -> Sig -> D -> Sig -> Sig

A bank of second-order bandpass filters, connected in parallel.

ares  resony  asig, kbf, kbw, inum, ksep [, isepmode] [, iscl] [, iskip]

csound doc: http://csound.com/docs/manual/resony.html

resonx :: Sig -> Sig -> Sig -> Sig

Emulates a stack of filters using the reson opcode.

resonx is equivalent to a filters consisting of more layers of reson with the same arguments, serially connected. Using a stack of a larger number of filters allows a sharper cutoff. They are faster than using a larger number instances in a Csound orchestra of the old opcodes, because only one initialization and k- cycle are needed at time and the audio loop falls entirely inside the cache memory of processor.

ares  resonx  asig, xcf, xbw [, inumlayer] [, iscl] [, iskip]

csound doc: http://csound.com/docs/manual/resonx.html

resonr :: Sig -> Sig -> Sig -> Sig

A bandpass filter with variable frequency response.

Implementations of a second-order, two-pole two-zero bandpass filter with variable frequency response.

ares  resonr  asig, xcf, xbw [, iscl] [, iskip]

csound doc: http://csound.com/docs/manual/resonr.html

reson :: Sig -> Sig -> Sig -> Sig

A second-order resonant filter.

ares  reson  asig, xcf, xbw [, iscl] [, iskip]

csound doc: http://csound.com/docs/manual/reson.html

mvclpf4 :: Sig -> Sig -> Sig -> (Sig, Sig, Sig, Sig)

Moog voltage-controlled lowpass filter emulation.

Mvclpf4 is an digital implementation of the 4th-order (24 dB/oct) Moog ladder filter originally written by Fons Andriaensen. It is a version of the mvclpf3 opcode with four outputs, for 6dB, 12dB, 18dB, and 24 dB/octave responses.

asig1,asig2,asig3,asig4  mvclpf4  ain, xcf, xres[, istor]

csound doc: http://csound.com/docs/manual/mvclpf4.html

mvclpf3 :: Sig -> Sig -> Sig -> Sig

Moog voltage-controlled lowpass filter emulation.

Mvclpf3 is an digital implementation of the 4th-order (24 dB/oct) Moog ladder filter originally written by Fons Andriaensen. According to the author, mvclpf3 "is based on mvclpf2 , with two differences. It uses the the technique described by Stilson and Smith to extend the constant-Q range, and the internal sample frequency is doubled, giving a better approximation to the non-linear behaviour at high freqencies. This version has high Q over the entire frequency range and will oscillate up to above 10 kHz, while the two others show a decreasing Q at high frequencies. Mvclpf3 is reasonably well tuned, and can be played as a VCO up to at least 5 kHz".

asig  mvclpf3  ain, xcf, xres[, istor]

csound doc: http://csound.com/docs/manual/mvclpf3.html

mvclpf2 :: Sig -> Sig -> Sig -> Sig

Moog voltage-controlled lowpass filter emulation.

Mvclpf2 is an digital implementation of the 4th-order (24 dB/oct) Moog ladder filter originally written by Fons Andriaensen. According to the author, mvclpf2 "uses five non-linear elements, in the input and in all four filter sections. It works by using the derivative of the nonlinearity (for which 1 / (1 + x * x) is reasonable approximation). The main advantage of this is that only one evaluation of the non-linear function is required for each section".

asig  mvclpf2  ain, xcf, xres[, istor]

csound doc: http://csound.com/docs/manual/mvclpf2.html

mvclpf1 :: Sig -> Sig -> Sig -> Sig

Moog voltage-controlled lowpass filter emulation.

Mvclpf1 is an digital implementation of the 4th-order (24 dB/oct) Moog ladder filter originally written by Fons Andriaensen. According to the author, mvclpf1 "is a fairly simple design, and it does not even pretend to come close the 'real thing'. It uses a very crude approximation of the non-linear resistor in the first filter section only. [...] [I]t's [a] cheap (in terms of CPU usage) general purpose 24 dB/oct lowpass filter that could be useful".

asig  mvclpf1  ain, xcf, xres[,istor]

csound doc: http://csound.com/docs/manual/mvclpf1.html

mvchpf :: Sig -> Sig -> Sig

Moog voltage-controlled highpass filter emulation.

Mvchpf is an digital implementation of the 4th-order (24 dB/oct) Moog high-pass filter, originally written by Fons Andriaensen. According to the author, mvchpf "...is based on the voltage controlled highpass filter by Robert Moog. again with some attention to the nonlinear effects."

asig  mvchpf  ain, xcf[, istor]

csound doc: http://csound.com/docs/manual/mvchpf.html

moogvcf2 :: Sig -> Sig -> Sig -> Sig

A digital emulation of the Moog diode ladder filter configuration.

ares  moogvcf2  asig, xfco, xres [,iscale, iskip]

csound doc: http://csound.com/docs/manual/moogvcf2.html

moogvcf :: Sig -> Sig -> Sig -> Sig

A digital emulation of the Moog diode ladder filter configuration.

ares  moogvcf  asig, xfco, xres [,iscale, iskip]

csound doc: http://csound.com/docs/manual/moogvcf.html

moogladder2 :: Sig -> Sig -> Sig -> Sig

Moog ladder lowpass filter.

Moogladder2 is an new digital implementation of the Moog ladder filter based on the work of Antti Huovilainen, described in the paper "Non-Linear Digital Implementation of the Moog Ladder Filter" (Proceedings of DaFX04, Univ of Napoli). This implementation uses approximations to the tanh function and so is faster but less accurate than moogladder.

asig  moogladder2  ain, kcf, kres[, istor]
asig  moogladder2  ain, acf, kres[, istor]
asig  moogladder2  ain, kcf, ares[, istor]
asig  moogladder2  ain, acf, ares[, istor]

csound doc: http://csound.com/docs/manual/moogladder2.html

moogladder :: Sig -> Sig -> Sig -> Sig

Moog ladder lowpass filter.

Moogladder is an new digital implementation of the Moog ladder filter based on the work of Antti Huovilainen, described in the paper "Non-Linear Digital Implementation of the Moog Ladder Filter" (Proceedings of DaFX04, Univ of Napoli). This implementation is probably a more accurate digital representation of the original analogue filter.

asig  moogladder  ain, kcf, kres[, istor]
asig  moogladder  ain, acf, kres[, istor]
asig  moogladder  ain, kcf, ares[, istor]
asig  moogladder  ain, acf, ares[, istor]

csound doc: http://csound.com/docs/manual/moogladder.html

lpf18 :: Sig -> Sig -> Sig -> Sig -> Sig

A 3-pole sweepable resonant lowpass filter.

Implementation of a 3 pole sweepable resonant lowpass filter.

ares  lpf18  asig, xfco, xres, xdist [, iskip]

csound doc: http://csound.com/docs/manual/lpf18.html

lowresx :: Sig -> Sig -> Sig -> Sig

Simulates layers of serially connected resonant lowpass filters.

lowresx is equivalent to more layers of lowres with the same arguments serially connected.

ares  lowresx  asig, xcutoff, xresonance [, inumlayer] [, iskip]

csound doc: http://csound.com/docs/manual/lowresx.html

lowres :: Sig -> Sig -> Sig -> Sig

Another resonant lowpass filter.

lowres is a resonant lowpass filter.

ares  lowres  asig, kcutoff, kresonance [, iskip]

csound doc: http://csound.com/docs/manual/lowres.html

lowpass2 :: Sig -> Sig -> Sig -> Sig

A resonant lowpass filter.

Implementation of a resonant second-order lowpass filter.

ares  lowpass2  asig, kcf, kq [, iskip]

csound doc: http://csound.com/docs/manual/lowpass2.html

bqrez :: Sig -> Sig -> Sig -> Sig

A second-order multi-mode filter.

ares  bqrez  asig, xfco, xres [, imode] [, iskip]

csound doc: http://csound.com/docs/manual/bqrez.html

areson :: Sig -> Sig -> Sig -> Sig

A notch filter whose transfer functions are the complements of the reson opcode.

ares  areson  asig, kcf, kbw [, iscl] [, iskip]
ares  areson  asig, acf, kbw [, iscl] [, iskip]
ares  areson  asig, kcf, abw [, iscl] [, iskip]
ares  areson  asig, acf, abw [, iscl] [, iskip]

csound doc: http://csound.com/docs/manual/areson.html

zdf_ladder :: Sig -> Sig -> Sig -> Sig

Zero-delay feedback implementation of 4 pole ladder filter.

Zero-delay feedback implementation of a 4 pole (24 dB/oct) low-pass filter based on the Moog ladder filter.

asig  zdf_ladder  ain, xcf, xQ [, istor]

csound doc: http://csound.com/docs/manual/zdf_ladder.html

zdf_2pole_mode :: Sig -> Sig -> Sig -> (Sig, Sig, Sig)

Zero-delay feedback implementation of 2 pole filter with multimode output.

Zero-delay feedback implementation of a 2 pole (12 dB/oct) filter. Offers low-pass, band-pass, and high-pass output.

alp, abp, ahp  zdf_2pole_mode  ain, xcf, Q [, istor]

csound doc: http://csound.com/docs/manual/zdf_2pole_mode.html

zdf_2pole :: Sig -> Sig -> Sig -> Sig

Zero-delay feedback implementation of 2 pole filter.

Zero-delay feedback implementation of a 2 pole (12 dB/oct) filter. Offers low-pass (default), high-pass, and allpass output modes.

asig  zdf_2pole  ain, xcf, xQ [, kmode, istor]

csound doc: http://csound.com/docs/manual/zdf_2pole.html

zdf_1pole_mode :: Sig -> Sig -> (Sig, Sig)

Zero-delay feedback implementation of 1 pole filter with multimode output.

Zero-delay feedback implementation of a 1 pole (6 dB/oct) filter. Offers low-pass and high-pass output.

alp, ahp  zdf_1pole_mode  ain, xcf [, istor]

csound doc: http://csound.com/docs/manual/zdf_1pole_mode.html

zdf_1pole :: Sig -> Sig -> Sig

Zero-delay feedback implementation of 1 pole filter.

Zero-delay feedback implementation of a 1 pole (6 dB/oct) filter. Offers low-pass (default), high-pass, and allpass output modes.

asig  zdf_1pole  ain, xcf [, kmode, istor]

csound doc: http://csound.com/docs/manual/zdf_1pole.html

tonex :: Sig -> Sig -> Sig

Emulates a stack of filters using the tone opcode.

tonex is equivalent to a filter consisting of more layers of tone with the same arguments, serially connected. Using a stack of a larger number of filters allows a sharper cutoff. They are faster than using a larger number instances in a Csound orchestra of the old opcodes, because only one initialization and k- cycle are needed at time and the audio loop falls entirely inside the cache memory of processor.

ares  tonex   asig, khp [, inumlayer] [, iskip]
ares  tonex   asig, ahp [, inumlayer] [, iskip]

csound doc: http://csound.com/docs/manual/tonex.html

tone :: Sig -> Sig -> Sig

A first-order recursive low-pass filter with variable frequency response.

ares  tone  asig, khp [, iskip]

csound doc: http://csound.com/docs/manual/tone.html

mode :: Sig -> Sig -> Sig -> Sig

A filter that simulates a mass-spring-damper system

Filters the incoming signal with the specified resonance frequency and quality factor. It can also be seen as a signal generator for high quality factor, with an impulse for the excitation. You can combine several modes to built complex instruments such as bells or guitar tables.

aout  mode  ain, xfreq, xQ [, iskip]

csound doc: http://csound.com/docs/manual/mode.html

mediank :: Sig -> Sig -> D -> Sig

A median filter, a variant FIR lowpass filter.

Implementation of a median filter.

kres  mediank  kin, ksize, imaxsize [, iskip]

csound doc: http://csound.com/docs/manual/mediank.html

median :: Sig -> Sig -> D -> Sig

A median filter, a variant FIR lowpass filter.

Implementation of a median filter.

ares  median  asig, ksize, imaxsize [, iskip]

csound doc: http://csound.com/docs/manual/median.html

k35_lpf :: Sig -> Sig -> Sig -> Sig

Zero-delay feedback implementation of Korg35 resonant low-pass filter.

Zero-delay feedback implementation of Korg35 resonant low-pass filter. This filter design is found in the Korg MS10, early MS20, and Monotron series.

asig  K35_lpf  ain, xcf, xQ [, inlp, isaturation, istor]

csound doc: http://csound.com/docs/manual/k35_lpf.html

k35_hpf :: Sig -> Sig -> Sig -> Sig

Zero-delay feedback implementation of Korg35 resonant high-pass filter.

Zero-delay feedback implementation of Korg35 resonant high-pass filter. This filter design is found in the Korg MS10 early MS20.

asig  K35_hpf  ain, xcf, xQ [, inlp, isaturation, istor]

csound doc: http://csound.com/docs/manual/k35_hpf.html

doppler :: Sig -> Sig -> Sig -> Sig

A fast and robust method for approximating sound propagation, achieving convincing Doppler shifts without having to solve equations.

A fast and robust method for approximating sound propagation, achieving convincing Doppler shifts without having to solve equations. The method computes frequency shifts based on reading an input delay line at a delay time computed from the distance between source and mic and the speed of sound. One instance of the opcode is required for each dimension of space through which the sound source moves. If the source sound moves at a constant speed from in front of the microphone, through the microphone, to behind the microphone, then the output will be frequency shifted above the source frequency at a constant frequency while the source approaches, then discontinuously will be shifted below the source frequency at a constant frequency as the source recedes from the microphone. If the source sound moves at a constant speed through a point to one side of the microphone, then the rate of change of position will not be constant, and the familiar Doppler frequency shift typical of a siren or engine approaching and receding along a road beside a listener will be heard.

ashifted  doppler  asource, ksourceposition, kmicposition [, isoundspeed, ifiltercutoff]

csound doc: http://csound.com/docs/manual/doppler.html

diode_ladder :: Sig -> Sig -> Sig -> Sig

Zero-delay feedback implementation of 4 pole diode ladder filter.

Zero-delay feedback implementation of a 4 pole (24 dB/oct) diode low-pass filter. This filter design was originally used in the EMS VCS3 and was the resonant filter in the Roland TB-303.

asig  diode_ladder  ain, xcf, xk [, inlp, isaturation, istor]

csound doc: http://csound.com/docs/manual/diode_ladder.html

clfilt :: Sig -> Sig -> D -> D -> Sig

Implements low-pass and high-pass filters of different styles.

Implements the classical standard analog filter types: low-pass and high-pass. They are implemented with the four classical kinds of filters: Butterworth, Chebyshev Type I, Chebyshev Type II, and Elliptical. The number of poles may be any even number from 2 to 80.

ares  clfilt  asig, kfreq, itype, inpol [, ikind] [, ipbr] [, isba] [, iskip]

csound doc: http://csound.com/docs/manual/clfilt.html

butterlp :: Sig -> Sig -> Sig

A low-pass Butterworth filter.

Implementation of a second-order low-pass Butterworth filter. This opcode can also be written as butlp.

ares  butterlp  asig, kfreq [, iskip]
ares  butterlp  asig, afreq [, iskip]

csound doc: http://csound.com/docs/manual/butterlp.html

butterhp :: Sig -> Sig -> Sig

A high-pass Butterworth filter.

Implementation of second-order high-pass Butterworth filter. This opcode can also be written as buthp.

ares  butterhp  asig, kfreq [, iskip]
ares  butterhp  asig, afreq [, iskip]

csound doc: http://csound.com/docs/manual/butterhp.html

butterbr :: Sig -> Sig -> Sig -> Sig

A band-reject Butterworth filter.

Implementation of a second-order band-reject Butterworth filter. This opcode can also be written as butbr.

ares  butterbr  asig, xfreq, xband [, iskip]

csound doc: http://csound.com/docs/manual/butterbr.html

butterbp :: Sig -> Sig -> Sig -> Sig

A band-pass Butterworth filter.

Implementation of a second-order band-pass Butterworth filter. This opcode can also be written as butbp.

ares  butterbp  asig, xfreq, xband [, iskip]

csound doc: http://csound.com/docs/manual/butterbp.html

butlp :: Sig -> Sig -> Sig

Same as the butterlp opcode.

ares  butlp  asig, kfreq [, iskip]
ares  butlp  asig, afreq [, iskip]

csound doc: http://csound.com/docs/manual/butlp.html

buthp :: Sig -> Sig -> Sig

Same as the butterhp opcode.

ares  buthp  asig, kfreq [, iskip]
ares  buthp  asig, afreq [, iskip]

csound doc: http://csound.com/docs/manual/buthp.html

butbr :: Sig -> Sig -> Sig -> Sig

Same as the butterbr opcode.

ares  butbr  asig, kfreq, kband [, iskip]

csound doc: http://csound.com/docs/manual/butbr.html

butbp :: Sig -> Sig -> Sig -> Sig

Same as the butterbp opcode.

ares  butbp  asig, kfreq, kband [, iskip]

csound doc: http://csound.com/docs/manual/butbp.html

biquada :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

A sweepable general purpose biquadratic digital filter with a-rate parameters.

A sweepable general purpose biquadratic digital filter.

ares  biquada  asig, ab0, ab1, ab2, aa0, aa1, aa2 [, iskip]

csound doc: http://csound.com/docs/manual/biquada.html

biquad :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

A sweepable general purpose biquadratic digital filter.

ares  biquad  asig, kb0, kb1, kb2, ka0, ka1, ka2 [, iskip]

csound doc: http://csound.com/docs/manual/biquad.html

atonex :: Sig -> Sig -> Sig

Emulates a stack of filters using the atone opcode.

atonex is equivalent to a filter consisting of more layers of atone with the same arguments, serially connected. Using a stack of a larger number of filters allows a sharper cutoff. They are faster than using a larger number instances in a Csound orchestra of the old opcodes, because only one initialization and k- cycle are needed at time and the audio loop falls entirely inside the cache memory of processor.

ares  atonex  asig, khp [, inumlayer] [, iskip]
ares  atonex  asig, ahp [, inumlayer] [, iskip]

csound doc: http://csound.com/docs/manual/atonex.html

atone :: Sig -> Sig -> Sig

A hi-pass filter whose transfer functions are the complements of the tone opcode.

ares  atone  asig, khp [, iskip]

csound doc: http://csound.com/docs/manual/atone.html

phaser2 :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Second-order allpass filters arranged in a series.

An implementation of iord number of second-order allpass filters in series.

ares  phaser2  asig, kfreq, kq, kord, kmode, ksep, kfeedback

csound doc: http://csound.com/docs/manual/phaser2.html

phaser1 :: Sig -> Sig -> Sig -> Sig -> Sig

First-order allpass filters arranged in a series.

An implementation of iord number of first-order allpass filters in series.

ares  phaser1  asig, kfreq, kord, kfeedback [, iskip]

csound doc: http://csound.com/docs/manual/phaser1.html

harmon4 :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> D -> D -> Sig

Analyze an audio input and generate harmonizing voices in synchrony with formants preserved.

Generate harmonizing voices with formants preserved.

ares  harmon4  asig, koct, kfrq1, \
        kfrq2, kfrq3, kfrq4, icpsmode, ilowest[, ipolarity]

csound doc: http://csound.com/docs/manual/harmon2.html

harmon3 :: Sig -> Sig -> Sig -> Sig -> Sig -> D -> D -> Sig

Analyze an audio input and generate harmonizing voices in synchrony with formants preserved.

Generate harmonizing voices with formants preserved.

ares  harmon3  asig, koct, kfrq1, \
        kfrq2, kfrq3, icpsmode, ilowest[, ipolarity]

csound doc: http://csound.com/docs/manual/harmon2.html

harmon2 :: Sig -> Sig -> Sig -> Sig -> D -> D -> Sig

Analyze an audio input and generate harmonizing voices in synchrony with formants preserved.

Generate harmonizing voices with formants preserved.

ares  harmon2  asig, koct, kfrq1, kfrq2, icpsmode, ilowest[, ipolarity]

csound doc: http://csound.com/docs/manual/harmon2.html

harmon :: Sig -> Sig -> Sig -> Sig -> Sig -> D -> D -> D -> Sig

Analyze an audio input and generate harmonizing voices in synchrony.

ares  harmon  asig, kestfrq, kmaxvar, kgenfreq1, kgenfreq2, imode, \
          iminfrq, iprd

csound doc: http://csound.com/docs/manual/harmon.html

flanger :: Sig -> Sig -> Sig -> Sig

A user controlled flanger.

ares  flanger  asig, adel, kfeedback [, imaxd]

csound doc: http://csound.com/docs/manual/flanger.html

distort1 :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Modified hyperbolic tangent distortion.

Implementation of modified hyperbolic tangent distortion. distort1 can be used to generate wave shaping distortion based on a modification of the tanh function.

ares  distort1  asig, kpregain, kpostgain, kshape1, kshape2[, imode]

csound doc: http://csound.com/docs/manual/distort1.html

distort :: Sig -> Sig -> Tab -> Sig

Distort an audio signal via waveshaping and optional clipping.

ar  distort  asig, kdist, ifn[, ihp, istor]

csound doc: http://csound.com/docs/manual/distort.html

wrap :: Sig -> Sig -> Sig -> Sig

Wraps-around the signal that exceeds the low and high thresholds.

ares  wrap  asig, klow, khigh
ires  wrap  isig, ilow, ihigh
kres  wrap  ksig, klow, khigh

csound doc: http://csound.com/docs/manual/wrap.html

mirror :: Sig -> Sig -> Sig -> Sig

Reflects the signal that exceeds the low and high thresholds.

ares  mirror  asig, klow, khigh
ires  mirror  isig, ilow, ihigh
kres  mirror  ksig, klow, khigh

csound doc: http://csound.com/docs/manual/mirror.html

limit :: Sig -> Sig -> Sig -> Sig

Sets the lower and upper limits of the value it processes.

ares  limit  asig, klow, khigh
ires  limit  isig, ilow, ihigh
kres  limit  ksig, klow, khigh
ires[]  limit  isig[], ilow, ihigh
kres[]  limit  ksig[], klow, khigh

csound doc: http://csound.com/docs/manual/limit.html

vaset :: Sig -> Sig -> Sig -> SE ()

Write value of into the current buffer of an a-rate variable by index.

Write values into the current buffer of an a-rate variable at the given index. Useful for doing sample-by-sample manipulation at k-rate without using setksmps 1.

 vaset  kval, kndx, avar

csound doc: http://csound.com/docs/manual/vaset.html

vaget :: Sig -> Sig -> Sig

Access values of the current buffer of an a-rate variable by indexing.

Access values of the current buffer of an a-rate variable by indexing. Useful for doing sample-by-sample manipulation at k-rate without using setksmps 1.

kval  vaget  kndx, avar

csound doc: http://csound.com/docs/manual/vaget.html

upsamp :: Sig -> Sig

Modify a signal by up-sampling.

ares  upsamp  ksig

csound doc: http://csound.com/docs/manual/upsamp.html

samphold :: Sig -> Sig -> Sig

Performs a sample-and-hold operation on its input.

ares  samphold  asig, agate [, ival] [, ivstor]
kres  samphold  ksig, kgate [, ival] [, ivstor]

csound doc: http://csound.com/docs/manual/samphold.html

ntrpol :: Sig -> Sig -> Sig -> Sig

Calculates the weighted mean value of two input signals.

Calculates the weighted mean value (i.e. linear interpolation) of two input signals

ares  ntrpol  asig1, asig2, kpoint [, imin] [, imax]
ires  ntrpol  isig1, isig2, ipoint [, imin] [, imax]
kres  ntrpol  ksig1, ksig2, kpoint [, imin] [, imax]

csound doc: http://csound.com/docs/manual/ntrpol.html

interp :: Sig -> Sig

Converts a control signal to an audio signal using linear interpolation.

ares  interp  ksig [, iskip] [, imode]
        [, ivalue]

csound doc: http://csound.com/docs/manual/interp.html

integ :: Sig -> Sig

Modify a signal by integration.

ares  integ  asig [, iskip]
kres  integ  ksig [, iskip]

csound doc: http://csound.com/docs/manual/integ.html

fold :: Sig -> Sig -> Sig

Adds artificial foldover to an audio signal.

ares  fold  asig, kincr

csound doc: http://csound.com/docs/manual/fold.html

downsamp :: Sig -> Sig

Modify a signal by down-sampling.

kres  downsamp  asig [, iwlen]

csound doc: http://csound.com/docs/manual/downsamp.html

diff :: Sig -> Sig

Modify a signal by differentiation.

ares  diff  asig [, iskip]
kres  diff  ksig [, iskip]

csound doc: http://csound.com/docs/manual/diff.html

denorm :: [Sig] -> SE ()

Mixes low level noise to a list of a-rate signals

Mixes low level (~1e-20 for floats, and ~1e-56 for doubles) noise to a list of a-rate signals. Can be used before IIR filters and reverbs to avoid denormalized numbers which may otherwise result in significantly increased CPU usage.

 denorm  a1[, a2[, a3[, ... ]]]

csound doc: http://csound.com/docs/manual/denorm.html

vcomb :: Sig -> Sig -> Sig -> D -> Sig

Variably reverberates an input signal with a “colored” frequency response.

ares  vcomb  asig, krvt, xlpt, imaxlpt [, iskip] [, insmps]

csound doc: http://csound.com/docs/manual/vcomb.html

valpass :: Sig -> Sig -> Sig -> D -> Sig

Variably reverberates an input signal with a flat frequency response.

ares  valpass  asig, krvt, xlpt, imaxlpt [, iskip] [, insmps]

csound doc: http://csound.com/docs/manual/valpass.html

reverbsc :: Sig -> Sig -> Sig -> Sig -> (Sig, Sig)

8 delay line stereo FDN reverb, based on work by Sean Costello

8 delay line stereo FDN reverb, with feedback matrix based upon physical modeling scattering junction of 8 lossless waveguides of equal characteristic impedance. Based on Csound orchestra version by Sean Costello.

aoutL, aoutR  reverbsc  ainL, ainR, kfblvl, kfco[, israte[, ipitchm[, iskip]]] 

csound doc: http://csound.com/docs/manual/reverbsc.html

reverb2 :: Sig -> Sig -> Sig -> Sig

Same as the nreverb opcode.

ares  reverb2  asig, ktime, khdif [, iskip] [,inumCombs] \
          [, ifnCombs] [, inumAlpas] [, ifnAlpas]

csound doc: http://csound.com/docs/manual/reverb2.html

reverb :: Sig -> Sig -> Sig

Reverberates an input signal with a “natural room” frequency response.

ares  reverb  asig, krvt [, iskip]

csound doc: http://csound.com/docs/manual/reverb.html

platerev :: Tuple a => D -> D -> Sig -> D -> D -> D -> D -> [Sig] -> a

Models the reverberation of a metal plate.

Models the reverberation of a rectangular metal plate with settable physical characteristics when excited by audio signal(s).

a1[, a2, ...]  platerev  itabexcite. itabouts, kbndry, iaspect, istiff, idecay, iloss, aexcite1[, aexcite2, ...]

csound doc: http://csound.com/docs/manual/platerev.html

nreverb :: Sig -> Sig -> Sig -> Sig

A reverberator consisting of 6 parallel comb-lowpass filters.

This is a reverberator consisting of 6 parallel comb-lowpass filters being fed into a series of 5 allpass filters. nreverb replaces reverb2 (version 3.48) and so both opcodes are identical.

ares  nreverb  asig, ktime, khdif [, iskip] [,inumCombs] [, ifnCombs] \
          [, inumAlpas] [, ifnAlpas]

csound doc: http://csound.com/docs/manual/nreverb.html

nestedap :: Sig -> D -> D -> D -> D -> Sig

Three different nested all-pass filters.

Three different nested all-pass filters, useful for implementing reverbs.

ares  nestedap  asig, imode, imaxdel, idel1, igain1 [, idel2] [, igain2] \
          [, idel3] [, igain3] [, istor]

csound doc: http://csound.com/docs/manual/nestedap.html

freeverb :: Sig -> Sig -> Sig -> Sig -> (Sig, Sig)

Opcode version of Jezar's Freeverb

freeverb is a stereo reverb unit based on Jezar's public domain C++ sources, composed of eight parallel comb filters on both channels, followed by four allpass units in series. The filters on the right channel are slightly detuned compared to the left channel in order to create a stereo effect.

aoutL, aoutR  freeverb  ainL, ainR, kRoomSize, kHFDamp[, iSRate[, iSkip]] 

csound doc: http://csound.com/docs/manual/freeverb.html

combinv :: Sig -> Sig -> D -> Sig

Reverberates an input signal with a “colored” frequency response.

Reverberates an input signal with a “colored” frequency response with a FIR filter.

ares  combinv  asig, krvt, ilpt [, iskip] [, insmps]

csound doc: http://csound.com/docs/manual/combinv.html

comb :: Sig -> Sig -> D -> Sig

Reverberates an input signal with a “colored” frequency response.

ares  comb  asig, krvt, ilpt [, iskip] [, insmps]

csound doc: http://csound.com/docs/manual/comb.html

babo :: Sig -> Sig -> Sig -> Sig -> D -> D -> D -> (Sig, Sig)

A physical model reverberator.

babo stands for ball-within-the-box. It is a physical model reverberator based on the paper by Davide Rocchesso "The Ball within the Box: a sound-processing metaphor", Computer Music Journal, Vol 19, N.4, pp.45-47, Winter 1995.

a1, a2  babo  asig, ksrcx, ksrcy, ksrcz, irx, iry, irz [, idiff] [, ifno]

csound doc: http://csound.com/docs/manual/babo.html

alpass :: Sig -> Sig -> D -> Sig

Reverberates an input signal with a flat frequency response.

ares  alpass  asig, xrvt, ilpt [, iskip] [, insmps]

csound doc: http://csound.com/docs/manual/alpass.html

vbapzmove :: Sig -> D -> D -> D -> [D] -> SE ()

Writes a multi-channel audio signal to a ZAK array with moving virtual sources.

 vbapzmove  inumchnls, istartndx, asig, idur, ispread, ifldnum, ifld1, \
          ifld2, [...]

csound doc: http://csound.com/docs/manual/vbapzmove.html

vbapz :: D -> D -> Sig -> Sig -> SE ()

Writes a multi-channel audio signal to a ZAK array.

 vbapz  inumchnls, istartndx, asig, kazim [, kelev] [, kspread]

csound doc: http://csound.com/docs/manual/vbapz.html

vbapmove :: Tuple a => Sig -> D -> D -> D -> [D] -> a

Distributes an audio signal among many channels with moving virtual sources.

Distributes an audio signal among upto 64 channels with moving virtual sources.

ar1[, ar2...]  vbapmove  asig, idur, ispread, ifldnum, ifld1 \
          [, ifld2] [...]
aarray[]  vbapmove  asig, idur, ispread, ifldnum, ifld1 \
          [, ifld2] [...]

csound doc: http://csound.com/docs/manual/vbapmove.html

vbaplsinit :: D -> D -> SE ()

Configures VBAP output according to loudspeaker parameters.

 vbaplsinit  idim, ilsnum [, idir1] [, idir2] [...] [, idir32]
 vbaplsinit  idim, ilsnum, ilsarray

csound doc: http://csound.com/docs/manual/vbaplsinit.html

vbapgmove :: Tuple a => D -> D -> D -> D -> a

Calculates the gains for a sound location between multiple channels with moving virtual sources.

kr1[, kr2...]  vbapgmove  idur, ispread, ifldnum, ifld1 \
          [, ifld2] [...]
karray[]  vbapgmove  idur, ispread, ifldnum, ifld1 \
          [, ifld2] [...]

csound doc: http://csound.com/docs/manual/vbapgmove.html

vbapg :: Tuple a => Sig -> a

Calculates the gains for a sound location between multiple channels.

Calculates the gains for a sound location for up to 64.

k1[, k2...]  vbapg  kazim [,kelev] [, kspread] [, ilayout]
karray[]  vbapg  kazim [,kelev] [, kspread] [, ilayout]

csound doc: http://csound.com/docs/manual/vbapg.html

vbap8move :: Tuple a => Sig -> D -> D -> D -> [D] -> a

Distributes an audio signal among 8 channels with moving virtual sources.

ar1, ..., ar8  vbap8move  asig, idur, ispread, ifldnum, ifld1 \
          [, ifld2] [...]

csound doc: http://csound.com/docs/manual/vbap8move.html

vbap8 :: Tuple a => Sig -> Sig -> a

Distributes an audio signal among 8 channels.

ar1, ..., ar8  vbap8  asig, kazim [, kelev] [, kspread]

csound doc: http://csound.com/docs/manual/vbap8.html

vbap4move :: Tuple a => Sig -> D -> D -> D -> [D] -> a

Distributes an audio signal among 4 channels with moving virtual sources.

ar1, ar2, ar3, ar4  vbap4move  asig, idur, ispread, ifldnum, ifld1 \
          [, ifld2] [...]

csound doc: http://csound.com/docs/manual/vbap4move.html

vbap4 :: Sig -> Sig -> (Sig, Sig, Sig, Sig)

Distributes an audio signal among 4 channels.

ar1, ar2, ar3, ar4  vbap4  asig, kazim [, kelev] [, kspread]

csound doc: http://csound.com/docs/manual/vbap4.html

vbap16move :: Tuple a => Sig -> D -> D -> D -> [D] -> a

Distribute an audio signal among 16 channels with moving virtual sources.

ar1, ..., ar16  vbap16move  asig, idur, ispread, ifldnum, ifld1 \
          [, ifld2] [...]

csound doc: http://csound.com/docs/manual/vbap16move.html

vbap16 :: Tuple a => Sig -> Sig -> a

Distributes an audio signal among 16 channels.

ar1, ..., ar16  vbap16  asig, kazim [, kelev] [, kspread]

csound doc: http://csound.com/docs/manual/vbap16.html

vbap :: Tuple a => Sig -> Sig -> a

Distributes an audio signal among many channels.

Distributes an audio signal amongmany channels, up to 64 in the first form, arbitrary in the second.

ar1[, ar2...]  vbap  asig, kazim [,
        kelev] [, kspread] [, ilayout]
array[]  vbap  asig, kazim [,
        kelev] [, kspread] [, ilayout]

csound doc: http://csound.com/docs/manual/vbap.html

spsend :: (Sig, Sig, Sig, Sig)

Generates output signals based on a previously defined space opcode.

spsend depends upon the existence of a previously defined space. The output signals from spsend are derived from the values given for xy and reverb in the space and are ready to be sent to local or global reverb units (see example below).

a1, a2, a3, a4  spsend 

csound doc: http://csound.com/docs/manual/spsend.html

spdist :: Tab -> Sig -> Sig -> Sig -> Sig

Calculates distance values from xy coordinates.

spdist uses the same xy data as space, also either from a text file using Gen28 or from x and y arguments given to the unit directly. The purpose of this unit is to make available the values for distance that are calculated from the xy coordinates.

k1  spdist  ifn, ktime, kx, ky

csound doc: http://csound.com/docs/manual/spdist.html

spat3dt :: D -> D -> D -> D -> D -> D -> D -> D -> SE ()

Can be used to render an impulse response for a 3D space at i-time.

This opcode positions the input sound in a 3D space, with optional simulation of room acoustics, in various output formats. spat3dt can be used to render the impulse response at i-time, storing output in a function table, suitable for convolution.

 spat3dt  ioutft, iX, iY, iZ, idist, ift, imode, irlen [, iftnocl]

csound doc: http://csound.com/docs/manual/spat3dt.html

spat3di :: Sig -> D -> D -> D -> D -> D -> D -> (Sig, Sig, Sig, Sig)

Positions the input sound in a 3D space with the sound source position set at i-time.

This opcode positions the input sound in a 3D space, with optional simulation of room acoustics, in various output formats. With spat3di, sound source position is set at i-time.

aW, aX, aY, aZ  spat3di  ain, iX, iY, iZ, idist, ift, imode [, istor]

csound doc: http://csound.com/docs/manual/spat3di.html

spat3d :: Sig -> Sig -> Sig -> Sig -> D -> D -> D -> D -> D -> (Sig, Sig, Sig, Sig)

Positions the input sound in a 3D space and allows moving the sound at k-rate.

This opcode positions the input sound in a 3D space, with optional simulation of room acoustics, in various output formats. spat3d allows moving the sound at k-rate (this movement is interpolated internally to eliminate "zipper noise" if sr not equal to kr).

aW, aX, aY, aZ  spat3d  ain, kX, kY, kZ, idist, ift, imode, imdel, iovr [, istor]

csound doc: http://csound.com/docs/manual/spat3d.html

pan2 :: Sig -> Sig -> (Sig, Sig)

Distribute an audio signal across two channels.

Distribute an audio signal across two channels with a choice of methods.

a1, a2  pan2  asig, xp [, imode]

csound doc: http://csound.com/docs/manual/pan2.html

pan :: Sig -> Sig -> Sig -> Tab -> (Sig, Sig, Sig, Sig)

Distribute an audio signal amongst four channels.

Distribute an audio signal amongst four channels with localization control.

a1, a2, a3, a4  pan  asig, kx, ky, ifn [, imode] [, ioffset]

csound doc: http://csound.com/docs/manual/pan.html

locsig :: Sig -> Sig -> Sig -> Sig -> (Sig, Sig, Sig, Sig)

Takes an input signal and distributes between 2 or 4 channels.

locsig takes an input signal and distributes it among 2 or 4 channels using values in degrees to calculate the balance between adjacent channels. It also takes arguments for distance (used to attenuate signals that are to sound as if they are some distance further than the loudspeaker itself), and for the amount the signal that will be sent to reverberators. This unit is based upon the example in the Charles Dodge/Thomas Jerse book, Computer Music, page 320.

a1, a2  locsig  asig, kdegree, kdistance, kreverbsend
a1, a2,  a3, a4  locsig  asig, kdegree, kdistance, kreverbsend

csound doc: http://csound.com/docs/manual/locsig.html

locsend :: (Sig, Sig, Sig, Sig)

Distributes the audio signals of a previous locsig opcode.

locsend depends upon the existence of a previously defined locsig. The number of output signals must match the number in the previous locsig. The output signals from locsend are derived from the values given for distance and reverb in the locsig and are ready to be sent to local or global reverb units (see example below). The reverb amount and the balance between the 2 or 4 channels are calculated in the same way as described in the Dodge book (an essential text!).

a1, a2  locsend 
a1, a2,  a3, a4  locsend 

csound doc: http://csound.com/docs/manual/locsend.html

hrtfstat :: Sig -> D -> D -> D -> D -> (Sig, Sig)

Generates static 3d binaural audio for headphones using a Woodworth based spherical head model with improved low frequency phase accuracy.

This opcode takes a source signal and spatialises it in the 3 dimensional space around a listener using head related transfer function (HRTF) based filters. It produces a static output (azimuth and elevation parameters are i-rate), because a static source allows much more efficient processing than hrtfmove and hrtfmove2,.

      aleft, aright  hrtfstat  asrc, iAz, iElev, ifilel, ifiler [,iradius, isr]
        

csound doc: http://csound.com/docs/manual/hrtfstat.html

hrtfreverb :: Sig -> D -> D -> D -> D -> (Sig, Sig, D)

A binaural, dynamic FDN based diffuse-field reverberator. The opcode works independently as an efficient, flexible reverberator.

A frequency-dependent, efficient reverberant field is created based on low and high frequency desired reverb times. The opcode is designed to work with hrtfearly, ideally using its outputs as inputs. However, hrtfreverb can be used as a standalone tool. Stability is enforced.

aleft, aright, idel  hrtfreverb  asrc, ilowrt60, ihighrt60, ifilel, ifiler [,isr, imfp, iorder]

csound doc: http://csound.com/docs/manual/hrtfreverb.html

hrtfmove2 :: Sig -> Sig -> Sig -> D -> D -> (Sig, Sig)

Generates dynamic 3d binaural audio for headphones using a Woodworth based spherical head model with improved low frequency phase accuracy.

This opcode takes a source signal and spatialises it in the 3 dimensional space around a listener using head related transfer function (HRTF) based filters.

aleft, aright  hrtfmove2  asrc, kAz, kElev, ifilel, ifiler [,ioverlap, iradius, isr]

csound doc: http://csound.com/docs/manual/hrtfmove2.html

hrtfmove :: Sig -> Sig -> Sig -> D -> D -> (Sig, Sig)

Generates dynamic 3d binaural audio for headphones using magnitude interpolation and phase truncation.

This opcode takes a source signal and spatialises it in the 3 dimensional space around a listener by convolving the source with stored head related transfer function (HRTF) based filters.

aleft, aright  hrtfmove  asrc, kAz, kElev, ifilel, ifiler [, imode, ifade, isr]

csound doc: http://csound.com/docs/manual/hrtfmove.html

hrtfearly :: Tuple a => Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> D -> D -> D -> a

Generates 3D binaural audio with high-fidelity early reflections in a parametric room using a Phase Truncation algorithm.

This opcode essentially nests the hrtfmove opcode in an image model for a user-definable shoebox-shaped room. A default room can be selected, or advanced room parameters can be used. Room surfaces can be controlled with high and low-frequency absorption coefficients and gain factors of a three-band equaliser.

aleft, aright, irt60low, irt60high, imfp  hrtfearly  asrc, ksrcx, ksrcy, ksrcz, klstnrx, klstnry, klstnrz, \
          ifilel, ifiler, idefroom [,ifade, isr, iorder, ithreed, kheadrot, iroomx, iroomy, iroomz, iwallhigh, \
          iwalllow, iwallgain1, iwallgain2, iwallgain3, ifloorhigh, ifloorlow, ifloorgain1, ifloorgain2, \
          ifloorgain3, iceilinghigh, iceilinglow, iceilinggain1, iceilinggain2, iceilinggain3]

csound doc: http://csound.com/docs/manual/hrtfearly.html

bformenc1 :: Tuple a => Sig -> Sig -> Sig -> a

Codes a signal into the ambisonic B format.

Codes a signal into the ambisonic B format

aw, ax, ay, az  bformenc1  asig, kalpha, kbeta
aw, ax, ay, az, ar, as, at, au, av  bformenc1  asig, kalpha, kbeta
aw, ax, ay, az, ar, as, at, au, av, ak, al, am, an, ao, ap, aq  bformenc1  \
          asig, kalpha, kbeta
aarray[]  bformenc1  asig, kalpha, kbeta

csound doc: http://csound.com/docs/manual/bformenc1.html

bformenc :: Tuple a => Sig -> Sig -> Sig -> Sig -> Sig -> a

Deprecated. Codes a signal into the ambisonic B format.

Codes a signal into the ambisonic B format. Note that this opcode is deprecated as it is inaccurate, and is replaced by the much better opcode bformenc1 which replicates all the important features; also note that the gain arguments are not available in bformenc1.

aw, ax, ay, az  bformenc  asig, kalpha, kbeta, kord0, kord1
aw, ax, ay, az, ar, as, at, au, av  bformenc  asig, kalpha, kbeta, \
          kord0, kord1 , kord2
aw, ax, ay, az, ar, as, at, au, av, ak, al, am, an, ao, ap, aq  bformenc  \
          asig, kalpha, kbeta, kord0, kord1, kord2, kord3

csound doc: http://csound.com/docs/manual/bformenc.html

bformdec1 :: Tuple a => D -> Sig -> Sig -> Sig -> Sig -> a

Decodes an ambisonic B format signal

Decodes an ambisonic B format signal into loudspeaker specific signals.

ao1, ao2  bformdec1  isetup, aw, ax, ay, az [, ar, as, at, au, av \
          [, abk, al, am, an, ao, ap, aq]]
ao1, ao2, ao3, ao4  bformdec1  isetup, aw, ax, ay, az [, ar, as, at, \
          au, av [, abk, al, am, an, ao, ap, aq]]
ao1, ao2, ao3, ao4, ao5  bformdec1  isetup, aw, ax, ay, az [, ar, as, \
          at, au, av [, abk, al, am, an, ao, ap, aq]]
ao1, ao2, ao3, ao4, ao5, ao6, ao7, ao8  bformdec1  isetup, aw, ax, ay, az \
          [, ar, as, at, au, av [, abk, al, am, an, ao, ap,
        aq]]]
aout[]  bformdec1  isetup, abform[]

csound doc: http://csound.com/docs/manual/bformdec1.html

bformdec :: Tuple a => D -> Sig -> Sig -> Sig -> Sig -> a

Deprecated. Decodes an ambisonic B format signal.

Decodes an ambisonic B format signal into loudspeaker specific signals. Note that this opcode is deprecated as it is inaccurate, and is replaced by the much better opcode bformdec1 which replicates all the important features.

ao1, ao2  bformdec  isetup, aw, ax, ay, az [, ar, as, at, au, av \
          [, abk, al, am, an, ao, ap, aq]]
ao1, ao2, ao3, ao4  bformdec  isetup, aw, ax, ay, az [, ar, as, at, \
          au, av [, abk, al, am, an, ao, ap, aq]]
ao1, ao2, ao3, ao4, ao5  bformdec  isetup, aw, ax, ay, az [, ar, as, \
          at, au, av [, abk, al, am, an, ao, ap, aq]]
ao1, ao2, ao3, ao4, ao5, ao6, ao7, ao8  bformdec  isetup, aw, ax, ay, az \
          [, ar, as, at, au, av [, abk, al, am, an, ao, ap, aq]]]

csound doc: http://csound.com/docs/manual/bformdec.html

vdelayxws :: Sig -> Sig -> Sig -> D -> D -> (Sig, Sig)

Variable delay opcodes with high quality interpolation.

aout1, aout2  vdelayxws  ain1, ain2, adl, imd, iws [, ist]

csound doc: http://csound.com/docs/manual/vdelayxws.html

vdelayxwq :: Sig -> Sig -> Sig -> Sig -> Sig -> D -> D -> (Sig, Sig, Sig, Sig)

Variable delay opcodes with high quality interpolation.

aout1, aout2, aout3, aout4  vdelayxwq  ain1, ain2, ain3, ain4, adl, \
          imd, iws [, ist]

csound doc: http://csound.com/docs/manual/vdelayxwq.html

vdelayxw :: Sig -> Sig -> D -> D -> Sig

Variable delay opcodes with high quality interpolation.

aout  vdelayxw  ain, adl, imd, iws [, ist]

csound doc: http://csound.com/docs/manual/vdelayxw.html

vdelayxs :: Sig -> Sig -> Sig -> D -> D -> (Sig, Sig)

A stereo variable delay opcode with high quality interpolation.

aout1, aout2  vdelayxs  ain1, ain2, adl, imd, iws [, ist]

csound doc: http://csound.com/docs/manual/vdelayxs.html

vdelayxq :: Sig -> Sig -> Sig -> Sig -> Sig -> D -> D -> (Sig, Sig, Sig, Sig)

A 4-channel variable delay opcode with high quality interpolation.

aout1, aout2, aout3, aout4  vdelayxq  ain1, ain2, ain3, ain4, adl, imd, iws [, ist]

csound doc: http://csound.com/docs/manual/vdelayxq.html

vdelayx :: Sig -> Sig -> D -> D -> Sig

A variable delay opcode with high quality interpolation.

aout  vdelayx  ain, adl, imd, iws [, ist]

csound doc: http://csound.com/docs/manual/vdelayx.html

vdelay3 :: Sig -> Sig -> D -> Sig

A variable time delay with cubic interpolation.

vdelay3 is experimental. It is the same as vdelay except that it uses cubic interpolation. (New in Version 3.50.)

ares  vdelay3  asig, adel, imaxdel [, iskip]

csound doc: http://csound.com/docs/manual/vdelay3.html

vdelay :: Sig -> Sig -> D -> Sig

An interpolating variable time delay.

This is an interpolating variable time delay, it is not very different from the existing implementation (deltapi), it is only easier to use.

ares  vdelay  asig, adel, imaxdel [, iskip]

csound doc: http://csound.com/docs/manual/vdelay.html

multitap :: Sig -> [D] -> Sig

Multitap delay line implementation.

ares  multitap  asig [, itime1, igain1] [, itime2, igain2] [...]

csound doc: http://csound.com/docs/manual/multitap.html

deltapxw :: Sig -> Sig -> D -> SE ()

Mixes the input signal to a delay line.

deltapxw mixes the input signal to a delay line. This opcode can be mixed with reading units (deltap, deltapn, deltapi, deltap3, and deltapx) in any order; the actual delay time is the difference of the read and write time. This opcode can read from and write to a delayr/delayw delay line with interpolation.

 deltapxw  ain, adel, iwsize

csound doc: http://csound.com/docs/manual/deltapxw.html

deltapx :: Sig -> D -> SE Sig

Read from or write to a delay line with interpolation.

deltapx is similar to deltapi or deltap3. However, it allows higher quality interpolation. This opcode can read from and write to a delayr/delayw delay line with interpolation.

aout  deltapx  adel, iwsize

csound doc: http://csound.com/docs/manual/deltapx.html

deltapn :: Sig -> Sig

Taps a delay line at variable offset times.

Tap a delay line at variable offset times.

ares  deltapn  xnumsamps

csound doc: http://csound.com/docs/manual/deltapn.html

deltapi :: Sig -> SE Sig

Taps a delay line at variable offset times, uses interpolation.

ares  deltapi  xdlt

csound doc: http://csound.com/docs/manual/deltapi.html

deltap3 :: Sig -> SE Sig

Taps a delay line at variable offset times, uses cubic interpolation.

ares  deltap3  xdlt

csound doc: http://csound.com/docs/manual/deltap3.html

deltap :: Sig -> SE Sig

Taps a delay line at variable offset times.

Tap a delay line at variable offset times.

ares  deltap  kdlt

csound doc: http://csound.com/docs/manual/deltap.html

delayw :: Sig -> SE ()

Writes the audio signal to a digital delay line.

 delayw  asig

csound doc: http://csound.com/docs/manual/delayw.html

delayr :: D -> SE Sig

Reads from an automatically established digital delay line.

ares  delayr  idlt [, iskip]

csound doc: http://csound.com/docs/manual/delayr.html

vdel_k :: Sig -> Sig -> D -> Sig

Delays an input signal by some time interval.

k-rate delay opcodes

kr  vdel_k   ksig, kdel, imdel[, imode]

csound doc: http://csound.com/docs/manual/delayk.html

delayk :: Sig -> D -> Sig

Delays an input signal by some time interval.

k-rate delay opcodes

kr  delayk   ksig, idel[, imode]

csound doc: http://csound.com/docs/manual/delayk.html

delay1 :: Sig -> Sig

Delays an input signal by one sample.

ares  delay1  asig [, iskip]

csound doc: http://csound.com/docs/manual/delay1.html

tvconv :: Sig -> Sig -> Sig -> Sig -> D -> D -> Sig

A time-varying convolution (FIR filter) opcode.

An opcode that takes two incoming signals and interprets one of them as the coefficients of linear time-variable finite impulse response filter. This is implemented via direct convolution (for partition sizes of 1 sample) or DFT-based partitioned convolution. The signals can be frozen (i.e. the filter coefficients are kept the same) at any point in time, at a-rate or k-rate.

ares  tvconv  asig1, asig2, xfreez1,
        xfreez2, iparts, ifils

csound doc: http://csound.com/docs/manual/tvconv.html

pconvolve :: Tuple a => Sig -> Str -> a

Convolution based on a uniformly partitioned overlap-save algorithm

Convolution based on a uniformly partitioned overlap-save algorithm. Compared to the convolve opcode, pconvolve has these benefits:

ar1 [, ar2] [, ar3] [, ar4]  pconvolve  ain, ifilcod [, ipartitionsize, ichannel]

csound doc: http://csound.com/docs/manual/pconvolve.html

liveconv :: Sig -> D -> D -> Sig -> Sig -> Sig

Partitioned convolution with dynamically reloadable impulse response

Computationally efficient, partitioned convolution, using a function table as impulse response (IR) source, similar to the ftconv opcode. The liveconv opcode allows dynamic reload of IR data at any time while the convolution is running, controlled by the kupdate parameter. Due to the manner in which the IR is updated, the operation can be done without audio artifacts in the convolution output.

ares  liveconv  ain, ift, iplen, kupdate, kclear

csound doc: http://csound.com/docs/manual/liveconv.html

ftmorf :: Sig -> Tab -> Tab -> SE ()

Morphs between multiple ftables as specified in a list.

Uses an index into a table of ftable numbers to morph between adjacent tables in the list.This morphed function is written into the table referenced by iresfn on every k-cycle.

 ftmorf  kftndx, iftfn, iresfn

csound doc: http://csound.com/docs/manual/ftmorf.html

ftconv :: Tuple a => Sig -> D -> D -> a

Low latency multichannel convolution, using a function table as impulse response source.

Low latency multichannel convolution, using a function table as impulse response source. The algorithm is to split the impulse response to partitions of length determined by the iplen parameter, and delay and mix partitions so that the original, full length impulse response is reconstructed without gaps. The output delay (latency) is iplen samples, and does not depend on the control rate, unlike in the case of other convolve opcodes.

a1[, a2[, a3[, ... a8]]]  ftconv  ain, ift, iplen[, iskipsamples \
          [, iirlen[, iskipinit]]]

csound doc: http://csound.com/docs/manual/ftconv.html

dconv :: Sig -> D -> Tab -> Sig

A direct convolution opcode.

ares  dconv  asig, isize, ifn

csound doc: http://csound.com/docs/manual/dconv.html

cross2 :: Sig -> Sig -> D -> D -> D -> Sig -> Sig

Cross synthesis using FFT's.

This is an implementation of cross synthesis using FFT's.

ares  cross2  ain1, ain2, isize, ioverlap, iwin, kbias

csound doc: http://csound.com/docs/manual/cross2.html

convolve :: Tuple a => Sig -> Str -> a

Convolves a signal and an impulse response.

Output is the convolution of signal ain and the impulse response contained in ifilcod. If more than one output signal is supplied, each will be convolved with the same impulse response. Note that it is considerably more efficient to use one instance of the operator when processing a mono input to create stereo, or quad, outputs.

ar1 [, ar2] [, ar3] [, ar4]  convolve  ain, ifilcod [, ichannel]

csound doc: http://csound.com/docs/manual/convolve.html

gain :: Sig -> Sig -> Sig

Adjusts the amplitude audio signal according to a root-mean-square value.

ares  gain  asig, krms [, ihp] [, iskip]

csound doc: http://csound.com/docs/manual/gain.html

dam :: Sig -> Sig -> D -> D -> D -> D -> Sig

A dynamic compressor/expander.

This opcode dynamically modifies a gain value applied to the input sound ain by comparing its power level to a given threshold level. The signal will be compressed/expanded with different factors regarding that it is over or under the threshold.

ares  dam  asig, kthreshold, icomp1, icomp2, irtime, iftime

csound doc: http://csound.com/docs/manual/dam.html

compress2 :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> D -> Sig

Compress, limit, expand, duck or gate an audio signal.

This unit functions as an audio compressor, limiter, expander, or noise gate, using either soft-knee or hard-knee mapping, and with dynamically variable performance characteristics. It takes two audio input signals, aasig and acsig, the first of which is modified by a running analysis of the second. Both signals can be the same, or the first can be modified by a different controlling signal.

ar  compress2  aasig, acsig, kthresh, kloknee, khiknee, kratio, katt, krel, ilook

csound doc: http://csound.com/docs/manual/compress2.html

compress :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> D -> Sig

Compress, limit, expand, duck or gate an audio signal.

This unit functions as an audio compressor, limiter, expander, or noise gate, using either soft-knee or hard-knee mapping, and with dynamically variable performance characteristics. It takes two audio input signals, aasig and acsig, the first of which is modified by a running analysis of the second. Both signals can be the same, or the first can be modified by a different controlling signal.

ar  compress  aasig, acsig, kthresh, kloknee, khiknee, kratio, katt, krel, ilook

csound doc: http://csound.com/docs/manual/compress.html

clip :: Sig -> D -> D -> Sig

Clips a signal to a predefined limit.

Clips an a-rate signal to a predefined limit, in a “soft” manner, using one of three methods.

ares  clip  asig, imeth, ilimit [, iarg]

csound doc: http://csound.com/docs/manual/clip.html

balance :: Sig -> Sig -> Sig

Adjust one audio signal according to the values of another.

The rms power of asig can be interrogated, set, or adjusted to match that of a comparator signal.

ares  balance  asig, acomp [, ihp] [, iskip]

csound doc: http://csound.com/docs/manual/balance.html

mp3len :: Str -> D

Returns the length of an MP3 sound file.

ir  mp3len  ifilcod

csound doc: http://csound.com/docs/manual/mp3len.html

filevalid :: Str -> D

Checks that a file can be used.

Returns 1 if the sound file is valid, or 0 if not.

ir  filevalid  ifilcod

csound doc: http://csound.com/docs/manual/filevalid.html

filesr :: Str -> D

Returns the sample rate of a sound file.

ir  filesr  ifilcod [, iallowraw]

csound doc: http://csound.com/docs/manual/filesr.html

filepeak :: Str -> D

Returns the peak absolute value of a sound file.

ir  filepeak  ifilcod [, ichnl]

csound doc: http://csound.com/docs/manual/filepeak.html

filenchnls :: Str -> D

Returns the number of channels in a sound file.

ir  filenchnls  ifilcod [, iallowraw]

csound doc: http://csound.com/docs/manual/filenchnls.html

filelen :: Str -> D

Returns the length of a sound file.

ir  filelen  ifilcod, [iallowraw]

csound doc: http://csound.com/docs/manual/filelen.html

filebit :: Str -> D

Returns the number of bits in each sample in a sound file.

ir  filebit  ifilcod [, iallowraw]

csound doc: http://csound.com/docs/manual/filebit.html

prints :: Str -> [Sig] -> SE ()

Prints at init-time using a printf() style syntax.

 prints  "string" [, kval1] [, kval2] [...]

csound doc: http://csound.com/docs/manual/prints.html

printks2 :: Str -> Sig -> SE ()

Prints a new value every time a control variable changes using a printf() style syntax.

 printks2  "string", kval

csound doc: http://csound.com/docs/manual/printks2.html

printks :: Str -> D -> [Sig] -> SE ()

Prints at k-rate using a printf() style syntax.

 printks  "string", itime [, kval1] [, kval2] [...]

csound doc: http://csound.com/docs/manual/printks.html

printk2 :: Sig -> SE ()

Prints a new value every time a control variable changes.

 printk2  kvar [, inumspaces]

csound doc: http://csound.com/docs/manual/printk2.html

printk :: D -> Sig -> SE ()

Prints one k-rate value at specified intervals.

 printk  itime, kval [, ispace]

csound doc: http://csound.com/docs/manual/printk.html

printf :: Str -> Sig -> [Sig] -> SE ()

printf-style formatted output

printf and printf_i write formatted output, similarly to the C function printf(). printf_i runs at i-time only, while printf runs both at initialization and performance time.

 printf  Sfmt, ktrig, [xarg1[, xarg2[, ... ]]]

csound doc: http://csound.com/docs/manual/printf.html

printf_i :: Str -> D -> [D] -> SE ()

printf-style formatted output

printf and printf_i write formatted output, similarly to the C function printf(). printf_i runs at i-time only, while printf runs both at initialization and performance time.

 printf_i  Sfmt, itrig, [iarg1[, iarg2[, ... ]]]

csound doc: http://csound.com/docs/manual/printf.html

print' :: [D] -> SE ()

Displays the values init (i-rate) variables.

These units will print orchestra init-values.

 print  iarg [, iarg1] [, iarg2] [...]

csound doc: http://csound.com/docs/manual/print.html

flashtxt :: D -> Str -> SE ()

Allows text to be displayed from instruments like sliders

Allows text to be displayed from instruments like sliders etc. (only on Unix and Windows at present)

 flashtxt   iwhich, String

csound doc: http://csound.com/docs/manual/flashtxt.html

dispfft :: Sig -> D -> D -> SE ()

Displays the Fourier Transform of an audio or control signal.

These units will print orchestra init-values, or produce graphic display of orchestra control signals and audio signals. Uses X11 windows if enabled, else (or if -g flag is set) displays are approximated in ASCII characters.

 dispfft  xsig, iprd, iwsiz [, iwtyp] [, idbout] [, iwtflg] [,imin] [,imax]

csound doc: http://csound.com/docs/manual/dispfft.html

xout :: [Sig] -> SE ()

Retrieves variables from a user-defined opcode block,

The xin and xout opcodes copy variables to and from the opcode definition, allowing communication with the calling instrument.

 xout  xoutarg1 [, xoutarg2] ... [, xoutargN]

csound doc: http://csound.com/docs/manual/xout.html

xin :: Tuple a => a

Passes variables to a user-defined opcode block,

The xin and xout opcodes copy variables to and from the opcode definition, allowing communication with the calling instrument.

xinarg1 [, xinarg2] ... [xinargN]  xin 

csound doc: http://csound.com/docs/manual/xin.html

setksmps :: D -> SE ()

Sets the local ksmps value in an instrument or user-defined opcode block

Sets the local ksmps value in an instrument or user-defined opcode block.

 setksmps  iksmps

csound doc: http://csound.com/docs/manual/setksmps.html

chnsetks :: Str -> Str -> SE ()

Writes data to the named software bus.

Write to a channel of the named software bus. Implies declaring the channel with imod=2 (see also chn_k, chn_a, and chn_S).

 chnsetks  Sval, Sname

csound doc: http://csound.com/docs/manual/chnset.html

chnset :: D -> Str -> SE ()

Writes data to the named software bus.

Write to a channel of the named software bus. Implies declaring the channel with imod=2 (see also chn_k, chn_a, and chn_S).

 chnset  ival, Sname
 chnset  kval, Sname
 chnset  aval, Sname
 chnset  Sval, Sname

csound doc: http://csound.com/docs/manual/chnset.html

chnparams :: Tuple a => Str -> a

Query parameters of a channel.

Query parameters of a channel (if it does not exist, all returned values are zero).

itype, imode, ictltype, idflt, imin, imax  chnparams  Sname

csound doc: http://csound.com/docs/manual/chnparams.html

chnmix :: Sig -> Str -> SE ()

Writes audio data to the named software bus, mixing to the previous output.

Adds an audio signal to a channel of the named software bus. Implies declaring the channel with imode=2 (see also chn_a).

 chnmix  aval, Sname

csound doc: http://csound.com/docs/manual/chnmix.html

chngetks :: Str -> Str

Reads data from the software bus.

Reads data from a channel of the inward named software bus. Implies declaring the channel with imode=1 (see also chn_k, chn_a, and chn_S).

Sval  chngetks  Sname

csound doc: http://csound.com/docs/manual/chnget.html

chnget :: Str -> SE Str

Reads data from the software bus.

Reads data from a channel of the inward named software bus. Implies declaring the channel with imode=1 (see also chn_k, chn_a, and chn_S).

ival  chnget  Sname
kval  chnget  Sname
aval  chnget  Sname
Sval  chnget  Sname

csound doc: http://csound.com/docs/manual/chnget.html

chnexport :: Str -> D -> Str

Export a global variable as a channel of the bus.

Export a global variable as a channel of the bus; the channel should not already exist, otherwise an init error occurs. This opcode is normally called from the orchestra header, and allows the host application to read or write orchestra variables directly, without having to use chnget or chnset to copy data.

gival  chnexport  Sname, imode[, itype, idflt, imin, imax]
gkval  chnexport  Sname, imode[, itype, idflt, imin, imax]
gaval  chnexport  Sname, imode
gSval  chnexport  Sname, imode

csound doc: http://csound.com/docs/manual/chnexport.html

chnclear :: Str -> SE ()

Clears an audio output channel of the named software bus.

Clears an audio channel of the named software bus to zero. Implies declaring the channel with imode=2 (see also chn_a).

 chnclear  Sname

csound doc: http://csound.com/docs/manual/chnclear.html

chn_S :: Str -> D -> SE ()

Declare a channel of the named software bus.

Declare a channel of the named software bus, with setting optional parameters in the case of a control channel. If the channel does not exist yet, it is created, with an inital value of zero or empty string. Otherwise, the type (control, audio, or string) of the existing channel must match the declaration, or an init error occurs. The input/output mode of an existing channel is updated so that it becomes the bitwise OR of the previous and the newly specified value.

  chn_S  Sname, imode

csound doc: http://csound.com/docs/manual/chn.html

chn_a :: Str -> D -> SE ()

Declare a channel of the named software bus.

Declare a channel of the named software bus, with setting optional parameters in the case of a control channel. If the channel does not exist yet, it is created, with an inital value of zero or empty string. Otherwise, the type (control, audio, or string) of the existing channel must match the declaration, or an init error occurs. The input/output mode of an existing channel is updated so that it becomes the bitwise OR of the previous and the newly specified value.

  chn_a  Sname, imode

csound doc: http://csound.com/docs/manual/chn.html

chn_k :: Str -> D -> SE ()

Declare a channel of the named software bus.

Declare a channel of the named software bus, with setting optional parameters in the case of a control channel. If the channel does not exist yet, it is created, with an inital value of zero or empty string. Otherwise, the type (control, audio, or string) of the existing channel must match the declaration, or an init error occurs. The input/output mode of an existing channel is updated so that it becomes the bitwise OR of the previous and the newly specified value.

  chn_k  Sname, imode[, itype, idflt, imin, ima, ix, iy, iwidth, iheight, Sattributes]

csound doc: http://csound.com/docs/manual/chn.html

chano :: Sig -> Sig -> SE ()

Send data to the outwards software bus

Send data to a channel of the outward software bus.

 chano  kval, kchan
 chano  aval, kchan

csound doc: http://csound.com/docs/manual/chano.html

chani :: Sig -> SE Sig

Reads data from the software bus

Reads data from a channel of the inward software bus.

kval  chani  kchan
aval  chani  kchan

csound doc: http://csound.com/docs/manual/chani.html

soundouts :: Sig -> Sig -> Str -> SE ()

Deprecated. Writes audio output to a disk file.

The usage of soundouts is discouraged. Please use fout instead.

 soundouts   asigl, asigr, ifilcod [, iformat]

csound doc: http://csound.com/docs/manual/soundouts.html

soundout :: Sig -> Str -> SE ()

Deprecated. Writes audio output to a disk file.

The usage of soundout is discouraged. Please use fout instead.

 soundout   asig1, ifilcod [, iformat]

csound doc: http://csound.com/docs/manual/soundout.html

outz :: Sig -> SE ()

Writes multi-channel audio data from a ZAK array to an external device or stream.

 outz  ksig1

csound doc: http://csound.com/docs/manual/outz.html

outx :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> SE ()

Writes 16-channel audio data to an external device or stream.

 outx  asig1, asig2, asig3, asig4, asig5, asig6, asig7, asig8, \
          asig9, asig10, asig11, asig12, asig13, asig14, asig15, asig16

csound doc: http://csound.com/docs/manual/outx.html

outvalue :: Str -> D -> SE ()

Sends an i-rate or k-rate signal or string to a user-defined channel.

Sends an irate or k-rate signal or string to a user-defined channel.

 outvalue  "channel name", ivalue
 outvalue  "channel name", kvalue
 outvalue  "channel name", "string"

csound doc: http://csound.com/docs/manual/outvalue.html

outs2 :: Sig -> SE ()

Writes samples to stereo channel 2 of an external device or stream.

 outs2  asig

csound doc: http://csound.com/docs/manual/outs2.html

outs1 :: Sig -> SE ()

Writes samples to stereo channel 1 of an external device or stream.

 outs1  asig

csound doc: http://csound.com/docs/manual/outs1.html

outs :: Sig -> Sig -> SE ()

Writes stereo audio data to an external device or stream.

 outs  asig1, asig2

csound doc: http://csound.com/docs/manual/outs.html

outrg :: Sig -> [Sig] -> SE ()

Allow output to a range of adjacent audio channels on the audio output device

outrg outputs audio to a range of adjacent audio channels on the audio output device.

 outrg  kstart, aout1 [,aout2, aout3, ..., aoutN]

csound doc: http://csound.com/docs/manual/outrg.html

outq4 :: Sig -> SE ()

Writes samples to quad channel 4 of an external device or stream.

 outq4  asig

csound doc: http://csound.com/docs/manual/outq4.html

outq3 :: Sig -> SE ()

Writes samples to quad channel 3 of an external device or stream.

 outq3  asig

csound doc: http://csound.com/docs/manual/outq3.html

outq2 :: Sig -> SE ()

Writes samples to quad channel 2 of an external device or stream.

 outq2  asig

csound doc: http://csound.com/docs/manual/outq2.html

outq1 :: Sig -> SE ()

Writes samples to quad channel 1 of an external device or stream.

 outq1  asig

csound doc: http://csound.com/docs/manual/outq1.html

outq :: Sig -> Sig -> Sig -> Sig -> SE ()

Writes 4-channel audio data to an external device or stream.

 outq  asig1, asig2, asig3, asig4

csound doc: http://csound.com/docs/manual/outq.html

outo :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> SE ()

Writes 8-channel audio data to an external device or stream.

 outo  asig1, asig2, asig3, asig4, asig5, asig6, asig7, asig8

csound doc: http://csound.com/docs/manual/outo.html

outh :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> SE ()

Writes 6-channel audio data to an external device or stream.

 outh  asig1, asig2, asig3, asig4, asig5, asig6

csound doc: http://csound.com/docs/manual/outh.html

outch :: Sig -> [Sig] -> SE ()

Writes multi-channel audio data, with user-controllable channels, to an external device or stream.

 outch  kchan1, asig1 [, kchan2] [, asig2] [...]

csound doc: http://csound.com/docs/manual/outch.html

outc :: [Sig] -> SE ()

Writes audio data with an arbitrary number of channels to an external device or stream.

 outc  asig1 [, asig2] [...]

csound doc: http://csound.com/docs/manual/outc.html

out32 :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> SE ()

Writes 32-channel audio data to an external device or stream.

 out32  asig1, asig2, asig3, asig4, asig5, asig6, asig7, asig8, asig10, \
          asig11, asig12, asig13, asig14, asig15, asig16, asig17, asig18, \
          asig19, asig20, asig21, asig22, asig23, asig24, asig25, asig26, \
          asig27, asig28, asig29, asig30, asig31, asig32

csound doc: http://csound.com/docs/manual/out32.html

out :: Sig -> SE ()

Writes audio data to an external device or stream.

Writes audio data to an external device or stream, either from audio variables or from an audio array.

 out  asig1[, asig2,....]
 out  aarray

csound doc: http://csound.com/docs/manual/out.html

monitor :: Tuple a => a

Returns the audio spout frame.

Returns the audio spout frame (if active), otherwise it returns zero.

aout1 [,aout2 ... aoutX]  monitor 
aarra  monitor 

csound doc: http://csound.com/docs/manual/monitor.html

mdelay :: Sig -> Sig -> Sig -> Sig -> Sig -> SE ()

A MIDI delay opcode.

 mdelay  kstatus, kchan, kd1, kd2, kdelay

csound doc: http://csound.com/docs/manual/mdelay.html

soundin :: Tuple a => Str -> a

Reads audio data from an external device or stream.

Reads audio data from an external device or stream. Up to 24 channels may be read before v5.14, extended to 40 in later versions.

ar1[, ar2[, ar3[, ... a24]]]  soundin  ifilcod [, iskptim] [, iformat] \
          [, iskipinit] [, ibufsize]

csound doc: http://csound.com/docs/manual/soundin.html

mp3in :: Str -> (Sig, Sig)

Reads mono or stereo audio data from an external MP3 file.

ar1, ar2  mp3in  ifilcod[, iskptim, iformat, iskipinit, ibufsize]
ar1  mp3in  ifilcod[, iskptim, iformat, iskipinit, ibufsize]

csound doc: http://csound.com/docs/manual/mp3in.html

inz :: Sig -> SE ()

Reads multi-channel audio samples into a ZAK array from an external device or stream.

 inz  ksig1

csound doc: http://csound.com/docs/manual/inz.html

inx :: Tuple a => a

Reads a 16-channel audio signal from an external device or stream.

ar1, ar2, ar3, ar4, ar5, ar6, ar7, ar8, ar9, ar10, ar11, ar12, \
          ar13, ar14, ar15, ar16  inx 

csound doc: http://csound.com/docs/manual/inx.html

invalue :: Str -> Str

Reads a k-rate signal from a user-defined channel.

Reads a k-rate or i-rate signal or string from a user-defined channel.

ivalue  invalue  "channel name"
kvalue  invalue  "channel name"
Sname  invalue  "channel name"

csound doc: http://csound.com/docs/manual/invalue.html

ins :: (Sig, Sig)

Reads stereo audio data from an external device or stream.

ar1, ar2  ins 

csound doc: http://csound.com/docs/manual/ins.html

inrg :: Sig -> [Sig] -> SE ()

Allow input from a range of adjacent audio channels from the audio input device

inrg reads audio from a range of adjacent audio channels from the audio input device.

 inrg  kstart, ain1 [,ain2, ain3, ..., ainN]

csound doc: http://csound.com/docs/manual/inrg.html

inq :: (Sig, Sig, Sig, Sig)

Reads quad audio data from an external device or stream.

ar1, ar2,  ar3, a4  inq 

csound doc: http://csound.com/docs/manual/inq.html

ino :: Tuple a => a

Reads eight-channel audio data from an external device or stream.

ar1, ar2, ar3, ar4, ar5, ar6, ar7, ar8  ino 

csound doc: http://csound.com/docs/manual/ino.html

inh :: Tuple a => a

Reads six-channel audio data from an external device or stream.

ar1, ar2, ar3, ar4, ar5, ar6  inh 

csound doc: http://csound.com/docs/manual/inh.html

inch :: Tuple a => [Sig] -> a

Reads from numbered channels in an external audio signal or stream.

ain1[, ...]  inch  kchan1[,...]

csound doc: http://csound.com/docs/manual/inch.html

in32 :: Tuple a => a

Reads a 32-channel audio signal from an external device or stream.

ar1, ar2, ar3, ar4, ar5, ar6, ar7, ar8, ar9, ar10, ar11, ar12, ar13, ar14, \
          ar15, ar16, ar17, ar18, ar19, ar20, ar21, ar22, ar23, ar24, ar25, ar26, \
          ar27, ar28, ar29, ar30, ar31, ar32  in32 

csound doc: http://csound.com/docs/manual/in32.html

in' :: Sig

Reads mono audio data from an external device or stream.

Reads audio data from an external device or stream.

ar1  in 
aarray  in 

csound doc: http://csound.com/docs/manual/in.html

diskin2 :: Tuple a => Str -> a

Reads audio data from a file, and can alter its pitch using one of several available interpolation types, as well as convert the sample rate to match the orchestra sr setting.

Reads audio data from a file, and can alter its pitch using one of several available interpolation types, as well as convert the sample rate to match the orchestra sr setting. diskin2 can also read multichannel files with any number of channels in the range 1 to 24 in versions before 5.14, and 40 after.

a1[, a2[, ... aN]]  diskin2  ifilcod[, kpitch[, iskiptim \
          [, iwrap[, iformat[, iwsize[, ibufsize[, iskipinit]]]]]]]
ar1[]  diskin2  ifilcod[, kpitch[, iskiptim \
          [, iwrap[, iformat[, iwsize[, ibufsize[, iskipinit]]]]]]]

csound doc: http://csound.com/docs/manual/diskin2.html

diskin :: Tuple a => Str -> a

Reads audio data from an external device or stream and can alter its pitch.

ar1 [, ar2 [, ar3 [, ... arN]]]  diskin  ifilcod[, kpitch[, iskiptim \
          [, iwraparound[, iformat[, iskipinit]]]]]
ar1[]  diskin  ifilcod[, kpitch[, iskiptim \
          [, iwraparound[, iformat[, iskipinit]]]]]

csound doc: http://csound.com/docs/manual/diskin.html

readk4 :: Str -> D -> D -> (Sig, Sig, Sig, Sig)

Periodically reads four orchestra control-signal values from an external file.

kr1, kr2, kr3, kr4  readk4  ifilname, iformat, iprd

csound doc: http://csound.com/docs/manual/readk4.html

readk3 :: Str -> D -> D -> (Sig, Sig, Sig)

Periodically reads three orchestra control-signal values from an external file.

kr1, kr2, kr3  readk3  ifilname, iformat, iprd

csound doc: http://csound.com/docs/manual/readk3.html

readk2 :: Str -> D -> D -> (Sig, Sig)

Periodically reads two orchestra control-signal values from an external file.

kr1, kr2  readk2  ifilname, iformat, iprd

csound doc: http://csound.com/docs/manual/readk2.html

readk :: Str -> D -> D -> Sig

Periodically reads an orchestra control-signal value from an external file.

Periodically reads an orchestra control-signal value from a named external file in a specific format.

kres  readk  ifilname, iformat, iprd

csound doc: http://csound.com/docs/manual/readk.html

readfi :: Str -> (Str, D)

Read a line of text from an external file.

Read a line of text from an external file once on initialisation.

Sres, iline  readfi  ifilname

csound doc: http://csound.com/docs/manual/readfi.html

readf :: Str -> (Str, Sig)

Read a line of text from an external file.

Read a line of text from an external file once each k-cycle.

Sres, kline  readf  ifilname

csound doc: http://csound.com/docs/manual/readf.html

hdf5write :: Str -> Sig -> SE ()

Write signals and arrays to an hdf5 file.

hdf5write writes N signals and arrays to a specified hdf5 file.

 hdf5write  ifilename, xout1[, xout2, xout3, ..., xoutN]

csound doc: http://csound.com/docs/manual/hdf5write.html

hdf5read :: Tuple a => Str -> D -> a

Read signals and arrays from an hdf5 file.

hdf5read reads N signals and arrays from a specified hdf5 file.

xout1[, xout2, xout3, ..., xoutN]  hdf5read  ifilename, ivariablename1[, ivariablename2, ivariablename3, ..., ivariablenameN]

csound doc: http://csound.com/docs/manual/hdf5read.html

fprints :: Str -> Str -> [D] -> SE ()

Similar to prints but prints to a file.

 fprints  "filename", "string" [, ival1] [, ival2] [...]

csound doc: http://csound.com/docs/manual/fprints.html

fprintks :: Str -> Str -> [Sig] -> SE ()

Similar to printks but prints to a file.

 fprintks  "filename", "string", [, kval1] [, kval2] [...]

csound doc: http://csound.com/docs/manual/fprintks.html

foutk :: Str -> D -> [Sig] -> SE ()

Outputs k-rate signals of an arbitrary number of channels to a specified file, in raw (headerless) format.

foutk outputs N k-rate signals to a specified file of N channels.

 foutk  ifilename, iformat, kout1 [, kout2, kout3,....,koutN]

csound doc: http://csound.com/docs/manual/foutk.html

foutir :: Str -> D -> D -> [D] -> SE ()

Outputs i-rate signals from an arbitrary number of channels to a specified file.

foutir output N i-rate signals to a specified file of N channels.

 foutir  ihandle, iformat, iflag, iout1 [, iout2, iout3,....,ioutN]

csound doc: http://csound.com/docs/manual/foutir.html

fouti :: Str -> D -> D -> [D] -> SE ()

Outputs i-rate signals of an arbitrary number of channels to a specified file.

fouti output N i-rate signals to a specified file of N channels.

 fouti  ihandle, iformat, iflag, iout1 [, iout2, iout3,....,ioutN]

csound doc: http://csound.com/docs/manual/fouti.html

fout :: Str -> D -> [Sig] -> SE ()

Outputs a-rate signals to an arbitrary number of channels.

fout outputs N a-rate signals to a specified file of N channels.

 fout  ifilename, iformat, aout1 [, aout2, aout3,...,aoutN]
 fout  ifilename, iformat, array[]

csound doc: http://csound.com/docs/manual/fout.html

fiopen :: Str -> D -> SE D

Opens a file in a specific mode.

fiopen can be used to open a file in one of the specified modes.

ihandle  fiopen  ifilename, imode

csound doc: http://csound.com/docs/manual/fiopen.html

fink :: Str -> D -> D -> [Sig] -> SE ()

Read signals from a file at k-rate.

 fink  ifilename, iskipframes, iformat, kin1 [, kin2] [, kin3] [,...]

csound doc: http://csound.com/docs/manual/fink.html

fini :: Str -> D -> D -> [D] -> SE ()

Read signals from a file at i-rate.

 fini  ifilename, iskipframes, iformat, in1 [, in2] [, in3] [, ...]

csound doc: http://csound.com/docs/manual/fini.html

fin :: Str -> D -> D -> [Sig] -> SE ()

Read signals from a file at a-rate.

 fin  ifilename, iskipframes, iformat, ain1 [, ain2] [, ain3] [,...]
 fin  ifilename, iskipframes, iformat, arr[]

csound doc: http://csound.com/docs/manual/fin.html

ficlose :: D -> SE ()

Closes a previously opened file.

ficlose can be used to close a file which was opened with fiopen.

 ficlose  ihandle
 ficlose  Sfilename

csound doc: http://csound.com/docs/manual/ficlose.html

dumpk4 :: Sig -> Sig -> Sig -> Sig -> Str -> D -> D -> SE ()

Periodically writes four orchestra control-signal values to an external file.

Periodically writes four orchestra control-signal values to a named external file in a specific format.

 dumpk4  ksig1, ksig2, ksig3, ksig4, ifilname, iformat, iprd

csound doc: http://csound.com/docs/manual/dumpk4.html

dumpk3 :: Sig -> Sig -> Sig -> Str -> D -> D -> SE ()

Periodically writes three orchestra control-signal values to an external file.

Periodically writes three orchestra control-signal values to a named external file in a specific format.

 dumpk3  ksig1, ksig2, ksig3, ifilname, iformat, iprd

csound doc: http://csound.com/docs/manual/dumpk3.html

dumpk2 :: Sig -> Sig -> Str -> D -> D -> SE ()

Periodically writes two orchestra control-signal values to an external file.

Periodically writes two orchestra control-signal values to a named external file in a specific format.

 dumpk2  ksig1, ksig2, ifilname, iformat, iprd

csound doc: http://csound.com/docs/manual/dumpk2.html

dumpk :: Sig -> Str -> D -> D -> SE ()

Periodically writes an orchestra control-signal value to an external file.

Periodically writes an orchestra control-signal value to a named external file in a specific format.

 dumpk   ksig, ifilname, iformat, iprd

csound doc: http://csound.com/docs/manual/dumpk.html

wgpluck2 :: D -> Sig -> D -> Sig -> Sig -> Sig

Physical model of the plucked string.

wgpluck2 is an implementation of the physical model of the plucked string, with control over the pluck point, the pickup point and the filter. Based on the Karplus-Strong algorithm.

ares  wgpluck2  iplk, kamp, icps, kpick, krefl

csound doc: http://csound.com/docs/manual/wgpluck2.html

wgpluck :: D -> D -> Sig -> D -> D -> D -> Sig -> Sig

A high fidelity simulation of a plucked string.

A high fidelity simulation of a plucked string, using interpolating delay-lines.

ares  wgpluck  icps, iamp, kpick, iplk, idamp, ifilt, axcite

csound doc: http://csound.com/docs/manual/wgpluck.html

wgflute :: Sig -> Sig -> Sig -> D -> D -> Sig -> Sig -> Sig -> Sig

Creates a tone similar to a flute.

Audio output is a tone similar to a flute, using a physical model developed from Perry Cook, but re-coded for Csound.

ares  wgflute  kamp, kfreq, kjet, iatt,
        idetk, kngain, kvibf, kvamp [, ifn] [, iminfreq] [, ijetrf] [, iendrf]

csound doc: http://csound.com/docs/manual/wgflute.html

wgclar :: Sig -> Sig -> Sig -> D -> D -> Sig -> Sig -> Sig -> Sig

Creates a tone similar to a clarinet.

Audio output is a tone similar to a clarinet, using a physical model developed from Perry Cook, but re-coded for Csound.

ares  wgclar  kamp, kfreq, kstiff, \
        iatt, idetk, kngain, kvibf, kvamp [, ifn] [, iminfreq]

csound doc: http://csound.com/docs/manual/wgclar.html

wgbrass :: Sig -> Sig -> Sig -> D -> Sig -> Sig -> Sig

Creates a tone related to a brass instrument.

Audio output is a tone related to a brass instrument, using a physical model developed from Perry Cook, but re-coded for Csound.

ares  wgbrass  kamp, kfreq, ktens, iatt, kvibf, kvamp \
        [, ifn] [, iminfreq]

csound doc: http://csound.com/docs/manual/wgbrass.html

wgbowedbar :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig

A physical model of a bowed bar.

A physical model of a bowed bar, belonging to the Perry Cook family of waveguide instruments.

ares  wgbowedbar  kamp, kfreq, kpos, kbowpres, kgain [, iconst] [, itvel] \
          [, ibowpos] [, ilow]

csound doc: http://csound.com/docs/manual/wgbowedbar.html

wgbow :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Creates a tone similar to a bowed string.

Audio output is a tone similar to a bowed string, using a physical model developed from Perry Cook, but re-coded for Csound.

ares  wgbow  kamp, kfreq, kpres, krat, kvibf, kvamp \
        [, ifn] [, iminfreq]

csound doc: http://csound.com/docs/manual/wgbow.html

streson :: Sig -> Sig -> Sig -> Sig

A string resonator with variable fundamental frequency.

An audio signal is modified by a string resonator with variable fundamental frequency.

ares  streson  asig, kfr, kfdbgain

csound doc: http://csound.com/docs/manual/streson.html

repluck :: D -> Sig -> D -> Sig -> Sig -> Sig -> Sig

Physical model of the plucked string.

repluck is an implementation of the physical model of the plucked string. A user can control the pluck point, the pickup point, the filter, and an additional audio signal, axcite. axcite is used to excite the string. Based on the Karplus-Strong algorithm.

ares  repluck  iplk, kamp, icps, kpick, krefl, axcite

csound doc: http://csound.com/docs/manual/repluck.html

pluck :: Sig -> Sig -> D -> Tab -> D -> Sig

Produces a naturally decaying plucked string or drum sound.

Audio output is a naturally decaying plucked string or drum sound based on the Karplus-Strong algorithms.

ares  pluck  kamp, kcps, icps, ifn, imeth [, iparm1] [, iparm2]

csound doc: http://csound.com/docs/manual/pluck.html

wterrain :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> D -> D -> Sig

A simple wave-terrain synthesis opcode.

aout  wterrain  kamp, kpch, k_xcenter, k_ycenter, k_xradius, k_yradius, \
          itabx, itaby

csound doc: http://csound.com/docs/manual/wterrain.html

tablei :: SigOrD a => a -> Tab -> a

Accesses table values by direct indexing with linear interpolation.

ares  tablei  andx, ifn [, ixmode] [, ixoff] [, iwrap]
ires  tablei  indx, ifn [, ixmode] [, ixoff] [, iwrap]
kres  tablei  kndx, ifn [, ixmode] [, ixoff] [, iwrap]

csound doc: http://csound.com/docs/manual/tablei.html

table3 :: SigOrD a => a -> Tab -> a

Accesses table values by direct indexing with cubic interpolation.

ares  table3  andx, ifn [, ixmode] [, ixoff] [, iwrap]
ires  table3  indx, ifn [, ixmode] [, ixoff] [, iwrap]
kres  table3  kndx, ifn [, ixmode] [, ixoff] [, iwrap]

csound doc: http://csound.com/docs/manual/table3.html

table :: SigOrD a => a -> Tab -> a

Accesses table values by direct indexing.

ares  table  andx, ifn [, ixmode] [, ixoff] [, iwrap]
ires  table  indx, ifn [, ixmode] [, ixoff] [, iwrap]
kres  table  kndx, ifn [, ixmode] [, ixoff] [, iwrap]

csound doc: http://csound.com/docs/manual/table.html

tabw :: Sig -> Sig -> Tab -> SE ()

Fast table opcodes.

Fast table opcodes. Faster than table and tablew because don't allow wrap-around and limit and don't check index validity. Have been implemented in order to provide fast access to arrays. Support non-power of two tables (can be generated by any GEN function by giving a negative length value).

 tabw  ksig, kndx, ifn [,ixmode]
 tabw  asig, andx, ifn [,ixmode]

csound doc: http://csound.com/docs/manual/tab.html

tabw_i :: D -> D -> Tab -> SE ()

Fast table opcodes.

Fast table opcodes. Faster than table and tablew because don't allow wrap-around and limit and don't check index validity. Have been implemented in order to provide fast access to arrays. Support non-power of two tables (can be generated by any GEN function by giving a negative length value).

 tabw_i  isig, indx, ifn [,ixmode]

csound doc: http://csound.com/docs/manual/tab.html

tab :: Sig -> Tab -> Sig

Fast table opcodes.

Fast table opcodes. Faster than table and tablew because don't allow wrap-around and limit and don't check index validity. Have been implemented in order to provide fast access to arrays. Support non-power of two tables (can be generated by any GEN function by giving a negative length value).

kr  tab  kndx, ifn[, ixmode]
ar  tab  xndx, ifn[, ixmode]

csound doc: http://csound.com/docs/manual/tab.html

tab_i :: D -> Tab -> D

Fast table opcodes.

Fast table opcodes. Faster than table and tablew because don't allow wrap-around and limit and don't check index validity. Have been implemented in order to provide fast access to arrays. Support non-power of two tables (can be generated by any GEN function by giving a negative length value).

ir  tab_i  indx, ifn[, ixmode]

csound doc: http://csound.com/docs/manual/tab.html

ptablei :: Sig -> Tab -> Sig

Accesses table values by direct indexing with linear interpolation.

ares  ptablei  andx, ifn [, ixmode] [, ixoff] [, iwrap]
ires  ptablei  indx, ifn [, ixmode] [, ixoff] [, iwrap]
kres  ptablei  kndx, ifn [, ixmode] [, ixoff] [, iwrap]

csound doc: http://csound.com/docs/manual/ptablei.html

ptable3 :: Sig -> Tab -> Sig

Accesses table values by direct indexing with cubic interpolation.

ares  ptable3  andx, ifn [, ixmode] [, ixoff] [, iwrap]
ires  ptable3  indx, ifn [, ixmode] [, ixoff] [, iwrap]
kres  ptable3  kndx, ifn [, ixmode] [, ixoff] [, iwrap]

csound doc: http://csound.com/docs/manual/ptable3.html

ptable :: Sig -> Tab -> Sig

Accesses table values by direct indexing.

ares  ptable  andx, ifn [, ixmode] [, ixoff] [, iwrap]
ires  ptable  indx, ifn [, ixmode] [, ixoff] [, iwrap]
kres  ptable  kndx, ifn [, ixmode] [, ixoff] [, iwrap]

csound doc: http://csound.com/docs/manual/ptable.html

oscil1i :: D -> Sig -> D -> Sig

Accesses table values by incremental sampling with linear interpolation.

kres  oscil1i  idel, kamp, idur [, ifn]

csound doc: http://csound.com/docs/manual/oscil1i.html

oscil1 :: D -> Sig -> D -> Sig

Accesses table values by incremental sampling.

kres  oscil1  idel, kamp, idur [, ifn]

csound doc: http://csound.com/docs/manual/oscil1.html

stkWurley :: D -> D -> Sig

STKWurley simulates a Wurlitzer electric piano FM synthesis instrument.

STKWurley simulates a Wurlitzer electric piano FM synthesis instrument. It uses two simple FM Pairs summed together, also referred to as algorithm 5 of the TX81Z.

asignal  STKWurley  ifrequency, iamplitude, [kmod, kv1[, kcross, kv2[, klfo, kv3[, klfodepth, kv4[, kadsr, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKWurley.html

stkWhistle :: D -> D -> Sig

STKWhistle produces whistle sounds.

STKWhistle produces (police) whistle sounds. It uses a hybrid physical/spectral model of a police whistle (a la Cook).

asignal  STKWhistle  ifrequency, iamplitude, [kmod, kv1[, knoise, kv2[, kfipfreq, kv3[, kfipgain, kv4[, kvol, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKWhistle.html

stkVoicForm :: D -> D -> Sig

STKVoicForm is a four formant synthesis instrument.

STKVoicForm is a four formant synthesis instrument. This instrument contains an excitation singing wavetable (looping wave with random and periodic vibrato, smoothing on frequency, etc.), excitation noise, and four sweepable complex resonances. Measured formant data is included, and enough data is there to support either parallel or cascade synthesis. In the floating point case cascade synthesis is the most natural so that's what you'll find here.

asignal  STKVoicForm  ifrequency, iamplitude, [kmix, kv1[, ksel, kv2[, klfo, kv3[, klfodepth, kv4[, kloud, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKVoicForm.html

stkTubeBell :: D -> D -> Sig

STKTubeBell is a tubular bell (orchestral chime) FM synthesis instrument.

STKTubeBell is a tubular bell (orchestral chime) FM synthesis instrument. It uses two simple FM Pairs summed together, also referred to as algorithm 5 of the TX81Z.

asignal  STKTubeBell  ifrequency, iamplitude, [kmod, kv1[, kcross, kv2[, klfo, kv3[, klfodepth, kv4[, kadsr, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKTubeBell.html

stkStifKarp :: D -> D -> Sig

STKStifKarp is a plucked stiff string instrument.

STKStifKarp is a plucked stiff string instrument. It a simple plucked string algorithm (Karplus Strong) with enhancements, including string stiffness and pluck position controls. The stiffness is modeled with allpass filters.

asignal  STKStifKarp  ifrequency, iamplitude, [kpos, kv1[, ksus, kv2[, kstretch, kv3]]]

csound doc: http://csound.com/docs/manual/STKStifKarp.html

stkSitar :: D -> D -> Sig

STKSitar uses a plucked string physical model.

STKSitar uses a plucked string physical model based on the Karplus-Strong algorithm.

asignal  STKSitar  ifrequency, iamplitude

csound doc: http://csound.com/docs/manual/STKSitar.html

stkSimple :: D -> D -> Sig

STKSimple is a wavetable/noise instrument.

STKSimple is a wavetable/noise instrument. It combines a looped wave, a noise source, a biquad resonance filter, a one-pole filter, and an ADSR envelope to create some interesting sounds.

asignal  STKSimple  ifrequency, iamplitude, [kpos, kv1[, kcross, kv2[, kenv, kv3[, kgain, kv4]]]]

csound doc: http://csound.com/docs/manual/STKSimple.html

stkShakers :: D -> D -> Sig

STKShakers is an instrument that simulates environmental sounds or collisions of multiple independent sound producing objects.

STKShakers are a set of PhISEM and PhOLIES instruments: PhISEM (Physically Informed Stochastic Event Modeling) is an algorithmic approach for simulating collisions of multiple independent sound producing objects. It can simulate a Maraca, Sekere, Cabasa, Bamboo Wind Chimes, Water Drops, Tambourine, Sleighbells, and a Guiro. On http://soundlab.cs.princeton.edu/research/controllers/shakers/ PhOLIES (Physically-Oriented Library of Imitated Environmental Sounds) there is a similar approach for the synthesis of environmental sounds. It simulates of breaking sticks, crunchy snow (or not), a wrench, sandpaper, and more..

asignal  STKShakers  ifrequency, iamplitude, [kenerg, kv1[, kdecay, kv2[, kshake, kv3[, knum, kv4[, kres, kv5[, kinstr, kv6]]]]]]

csound doc: http://csound.com/docs/manual/STKShakers.html

stkSaxofony :: D -> D -> Sig

STKSaxofony is a faux conical bore reed instrument.

STKSaxofony is a faux conical bore reed instrument. This opcode uses a "hybrid" digital waveguide instrument that can generate a variety of wind-like sounds. It has also been referred to as the "blowed string" model. The waveguide section is essentially that of a string, with one rigid and one lossy termination. The non-linear function is a reed table. The string can be "blown" at any point between the terminations, though just as with strings, it is impossible to excite the system at either end. If the excitation is placed at the string mid-point, the sound is that of a clarinet. At points closer to the "bridge", the sound is closer to that of a saxophone.

asignal  STKSaxofony 
     ifrequency, iamplitude, [kstiff, kv1[, kapert, kv2[, kblow, kv3[, 
    knoise, kv4[, klfo, kv5[, klfodepth, kv6[, kbreath, kv7]]]]]]]

csound doc: http://csound.com/docs/manual/STKSaxofony.html

stkRhodey :: D -> D -> Sig

STK Fender Rhodes-like electric piano FM synthesis instrument.

asignal  STKRhodey  ifrequency, iamplitude, [kmod, kv1[, kcross, kv2[, klfo, kv3[, klfodepth, kv4[, kadsr, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKRhodey.html

stkResonate :: D -> D -> Sig

STKResonate is a noise driven formant filter.

STKResonate is a noise driven formant filter. This instrument contains a noise source, which excites a biquad resonance filter, with volume controlled by an ADSR.

asignal  STKResonate  ifrequency, iamplitude, [kfreq, kv1[, kpole, kv2[, knotch, kv3[, kzero, kv4[, kenv, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKResonate.html

stkPlucked :: D -> D -> Sig

STKPlucked uses a plucked string physical model.

STKPlucked uses a plucked string physical model based on the Karplus-Strong algorithm.

asignal  STKPlucked  ifrequency, iamplitude

csound doc: http://csound.com/docs/manual/STKPlucked.html

stkPercFlut :: D -> D -> Sig

STKPercFlut is a percussive flute FM synthesis instrument.

STKPercFlut is a percussive flute FM synthesis instrument. The instrument uses an algorithm like the algorithm 4 of the TX81Z.

asignal  STKPercFlut  ifrequency, iamplitude, [kmod, kv1[, kcross, kv2[, klfo, kv3[, klfodepth, kv4[, kadsr, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKPercFlut.html

stkMoog :: D -> D -> Sig

STKMoog produces moog-like swept filter sounds.

STKMoog produces moog-like swept filter sounds, using one attack wave, one looped wave, and an ADSR envelope and adds two sweepable formant filters.

asignal  STKMoog  ifrequency, iamplitude, [kq, kv1[, krate, kv2[, klfo, kv3[, klfodepth, kv4[, kvol, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKMoog.html

stkModalBar :: D -> D -> Sig

STKModalBar is a resonant bar instrument.

This opcode is a resonant bar instrument.It has a number of different struck bar instruments.

asignal  STKModalBar  ifrequency, iamplitude, [khard, kv1[, kpos, kv2[, klfo, kv3[, klfodepth, kv4[, kmix, kv5[, kvol, kv6[, kinstr, kv7]]]]]]]

csound doc: http://csound.com/docs/manual/STKModalBar.html

stkMandolin :: D -> D -> Sig

STKMandolin produces mamdolin-like sounds.

STKMandolin produces mamdolin-like sounds, using "commuted synthesis" techniques to model a mandolin instrument.

asignal  STKMandolin  ifrequency, iamplitude, [kbody, kv1[, kpos, kv2[, ksus, kv3[, kdetune, kv4[, kmic, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKMandolin.html

stkHevyMetl :: D -> D -> Sig

STKHevyMetl produces metal sounds.

STKHevyMetl produces metal sounds, using FM synthesis. It uses 3 cascade operators with feedback modulation, also referred to as algorithm 3 of the TX81Z.

asignal  STKHevyMetl  ifrequency, iamplitude, [kmod, kv1[, kcross, kv2[, klfo, kv3[, klfodepth, kv4[, kadsr, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKHevyMetl.html

stkFlute :: D -> D -> Sig

STKFlute uses a simple flute physical model.

STKFlute uses a simple flute physical model. The jet model uses a polynomial, a la Cook.

asignal  STKFlute  ifrequency, iamplitude, [kjet, kv1[, knoise, kv2[, klfo, kv3[, klfodepth, kv4[, kbreath, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKFlute.html

stkFMVoices :: D -> D -> Sig

STKFMVoices is a singing FM synthesis instrument.

STKFMVoices is a singing FM synthesis instrument. It has 3 carriers and a common modulator, also referred to as algorithm 6 of the TX81Z.

asignal  STKFMVoices  ifrequency, iamplitude, [kvowel, kv1[, kspec, kv2[, klfo, kv3[, klfodepth, kv4[, kadsr, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKFMVoices.html

stkDrummer :: D -> D -> Sig

STKDrummer is a drum sampling synthesizer.

STKDrummer is a drum sampling synthesizer using raw waves and one-pole filters, The drum rawwave files are sampled at 22050 Hz, but will be appropriately interpolated for other sample rates.

asignal  STKDrummer  ifrequency, iamplitude

csound doc: http://csound.com/docs/manual/STKDrummer.html

stkClarinet :: D -> D -> Sig

STKClarinet uses a simple clarinet physical model.

asignal  STKClarinet  ifrequency, iamplitude, [kstiff, kv1[, knoise, kv2[, klfo, kv3[, klfodepth, kv4[, kbreath, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKClarinet.html

stkBrass :: D -> D -> Sig

STKBrass is a simple brass instrument.

STKBrass uses a simple brass instrument waveguide model, a la Cook.

asignal  STKBrass  ifrequency, iamplitude, [klip, kv1[, kslide, kv2[, klfo, kv3[, klfodepth, kv4[, kvol, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKBrass.html

stkBowed :: D -> D -> Sig

STKBowed is a bowed string instrument.

STKBowed is a bowed string instrument, using a waveguide model.

asignal  STKBowed  ifrequency, iamplitude, [kpress, kv1[, kpos, kv2[, klfo, kv3[, klfodepth, kv4[, kvol, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKBowed.html

stkBlowHole :: D -> D -> Sig

STK clarinet physical model with one register hole and one tonehole.

This opcode is based on the clarinet model, with the addition of a two-port register hole and a three-port dynamic tonehole implementation.

asignal  STKBlowHole  ifrequency, iamplitude, [kreed, kv1[, knoise, kv2[, khole, kv3[, kreg, kv4[, kbreath, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKBlowHole.html

stkBlowBotl :: D -> D -> Sig

STKBlowBotl uses a helmholtz resonator (biquad filter) with a polynomial jet excitation.

This opcode implements a helmholtz resonator (biquad filter) with a polynomial jet excitation (a la Cook).

asignal  STKBlowBotl  ifrequency, iamplitude, [knoise, kv1[, klfo, kv2[, klfodepth, kv3[, kvol, kv4]]]]

csound doc: http://csound.com/docs/manual/STKBlowBotl.html

stkBeeThree :: D -> D -> Sig

STK Hammond-oid organ-like FM synthesis instrument.

asignal  STKBeeThree  ifrequency, iamplitude, [kop4, kv1[, kop3, kv2[, klfo, kv3[, klfodepth, kv4[, kadsr, kv5]]]]]

csound doc: http://csound.com/docs/manual/STKBeeThree.html

stkBandedWG :: D -> D -> Sig

STKBandedWG uses banded waveguide techniques to model a variety of sounds.

This opcode uses banded waveguide techniques to model a variety of sounds, including bowed bars, glasses, and bowls.

asignal  STKBandedWG  ifrequency, iamplitude, [kpress, kv1[, kmot, kv2[, klfo, kv3[, klfodepth, kv4[, kvel, kv5[, kstrk, kv6[, kinstr, kv7]]]]]]]

csound doc: http://csound.com/docs/manual/STKBandedWG.html

xscanu :: D -> D -> Tab -> Tab -> Tab -> Tab -> Tab -> Sig -> Sig -> Sig -> Sig -> D -> D -> Sig -> Sig -> Sig -> D -> D -> SE ()

Compute the waveform and the wavetable for use in scanned synthesis.

Experimental version of scanu. Allows much larger matrices and is faster and smaller but removes some (unused?) flexibility. If liked, it will replace the older opcode as it is syntax compatible but extended.

 xscanu  init, irate, ifnvel, ifnmass, ifnstif, ifncentr, ifndamp, kmass, \
          kstif, kcentr, kdamp, ileft, iright, kpos, kstrngth, ain, idisp, id

csound doc: http://csound.com/docs/manual/xscanu.html

xscansmap :: Sig -> Sig -> D -> Sig -> Sig -> SE ()

Allows the position and velocity of a node in a scanned process to be read.

 xscansmap  kpos, kvel, iscan, kamp, kvamp [, iwhich]

csound doc: http://csound.com/docs/manual/xscansmap.html

xscans :: Sig -> Sig -> Tab -> D -> Sig

Fast scanned synthesis waveform and the wavetable generator.

Experimental version of scans. Allows much larger matrices and is faster and smaller but removes some (unused?) flexibility. If liked, it will replace the older opcode as it is syntax compatible but extended.

ares  xscans  kamp, kfreq, ifntraj, id [, iorder]

csound doc: http://csound.com/docs/manual/xscans.html

xscanmap :: D -> Sig -> Sig -> (Sig, Sig)

Allows the position and velocity of a node in a scanned process to be read.

kpos, kvel  xscanmap  iscan, kamp, kvamp [, iwhich]

csound doc: http://csound.com/docs/manual/xscanmap.html

scanu :: D -> D -> Tab -> Tab -> Tab -> Tab -> Tab -> Sig -> Sig -> Sig -> Sig -> D -> D -> Sig -> Sig -> Sig -> D -> D -> SE ()

Compute the waveform and the wavetable for use in scanned synthesis.

 scanu  init, irate, ifnvel, ifnmass, ifnstif, ifncentr, ifndamp, kmass, \
          kstif, kcentr, kdamp, ileft, iright, kpos, kstrngth, ain, idisp, id

csound doc: http://csound.com/docs/manual/scanu.html

scantable :: Sig -> Sig -> D -> D -> D -> D -> D -> Sig

A simpler scanned synthesis implementation.

A simpler scanned synthesis implementation. This is an implementation of a circular string scanned using external tables. This opcode will allow direct modification and reading of values with the table opcodes.

aout  scantable  kamp, kpch, ipos, imass, istiff, idamp, ivel

csound doc: http://csound.com/docs/manual/scantable.html

scans :: Sig -> Sig -> Tab -> D -> Sig

Generate audio output using scanned synthesis.

ares  scans  kamp, kfreq, ifn, id [, iorder]

csound doc: http://csound.com/docs/manual/scans.html

scanhammer :: D -> D -> D -> D -> SE ()

Copies from one table to another with a gain control.

This is is a variant of tablecopy, copying from one table to another, starting at ipos, and with a gain control. The number of points copied is determined by the length of the source. Other points are not changed. This opcode can be used to “hit” a string in the scanned synthesis code.

 scanhammer  isrc, idst, ipos, imult

csound doc: http://csound.com/docs/manual/scanhammer.html

waveset :: Sig -> Sig -> Sig

A simple time stretch by repeating cycles.

ares  waveset  ain, krep [, ilen]

csound doc: http://csound.com/docs/manual/waveset.html

sndloop :: Sig -> Sig -> Sig -> D -> D -> (Sig, Sig)

A sound looper with pitch control.

This opcode records input audio and plays it back in a loop with user-defined duration and crossfade time. It also allows the pitch of the loop to be controlled, including reversed playback.

asig, krec  sndloop  ain, kpitch, ktrig, idur, ifad

csound doc: http://csound.com/docs/manual/sndloop.html

sfpreset :: D -> D -> Sf -> Sf -> D

Assigns an existing preset of a SoundFont2 (SF2) sample file to an index number.

Assigns an existing preset of a previously loaded SoundFont2 (SF2) sample file to an index number. These opcodes allow management the sample-structure of SF2 files. In order to understand the usage of these opcodes, the user must have some knowledge of the SF2 format, so a brief description of this format can be found in the SoundFont2 File Format Appendix.

ir  sfpreset  iprog, ibank, ifilhandle, ipreindex

csound doc: http://csound.com/docs/manual/sfpreset.html

sfplist :: Sf -> SE ()

Prints a list of all presets of a SoundFont2 (SF2) sample file.

Prints a list of all presets of a previously loaded SoundFont2 (SF2) sample file. These opcodes allow management the sample-structure of SF2 files. In order to understand the usage of these opcodes, the user must have some knowledge of the SF2 format, so a brief description of this format can be found in the SoundFont2 File Format Appendix.

 sfplist  ifilhandle

csound doc: http://csound.com/docs/manual/sfplist.html

sfplaym :: D -> D -> Sig -> Sig -> Sf -> Sig

Plays a SoundFont2 (SF2) sample preset, generating a mono sound.

Plays a SoundFont2 (SF2) sample preset, generating a mono sound. These opcodes allow management the sample-structure of SF2 files. In order to understand the usage of these opcodes, the user must have some knowledge of the SF2 format, so a brief description of this format can be found in the SoundFont2 File Format Appendix.

ares  sfplaym  ivel, inotenum, xamp, xfreq, ipreindex [, iflag] [, ioffset] [, ienv]

csound doc: http://csound.com/docs/manual/sfplaym.html

sfplay3m :: D -> D -> Sig -> Sig -> Sf -> Sig

Plays a SoundFont2 (SF2) sample preset, generating a mono sound with cubic interpolation.

Plays a SoundFont2 (SF2) sample preset, generating a mono sound with cubic interpolation. These opcodes allow management the sample-structure of SF2 files. In order to understand the usage of these opcodes, the user must have some knowledge of the SF2 format, so a brief description of this format can be found in the SoundFont2 File Format Appendix.

ares  sfplay3m  ivel, inotenum, xamp, xfreq, ipreindex [, iflag] [, ioffset] [, ienv]

csound doc: http://csound.com/docs/manual/sfplay3m.html

sfplay3 :: D -> D -> Sig -> Sig -> Sf -> (Sig, Sig)

Plays a SoundFont2 (SF2) sample preset, generating a stereo sound with cubic interpolation.

Plays a SoundFont2 (SF2) sample preset, generating a stereo sound with cubic interpolation. These opcodes allow management the sample-structure of SF2 files. In order to understand the usage of these opcodes, the user must have some knowledge of the SF2 format, so a brief description of this format can be found in the SoundFont2 File Format Appendix.

ar1, ar2  sfplay3  ivel, inotenum, xamp, xfreq, ipreindex [, iflag] [, ioffset] [, ienv]

csound doc: http://csound.com/docs/manual/sfplay3.html

sfplay :: D -> D -> Sig -> Sig -> Sf -> (Sig, Sig)

Plays a SoundFont2 (SF2) sample preset, generating a stereo sound.

Plays a SoundFont2 (SF2) sample preset, generating a stereo sound. These opcodes allow management the sample-structure of SF2 files. In order to understand the usage of these opcodes, the user must have some knowledge of the SF2 format, so a brief description of this format can be found in the SoundFont2 File Format Appendix.

ar1, ar2  sfplay  ivel, inotenum, xamp, xfreq, ipreindex [, iflag] [, ioffset] [, ienv]

csound doc: http://csound.com/docs/manual/sfplay.html

sfpassign :: D -> Sf -> SE ()

Assigns all presets of a SoundFont2 (SF2) sample file to a sequence of progressive index numbers.

Assigns all presets of a previously loaded SoundFont2 (SF2) sample file to a sequence of progressive index numbers. These opcodes allow management the sample-structure of SF2 files. In order to understand the usage of these opcodes, the user must have some knowledge of the SF2 format, so a brief description of this format can be found in the SoundFont2 File Format Appendix.

 sfpassign  istartindex, ifilhandle[, imsgs]

csound doc: http://csound.com/docs/manual/sfpassign.html

sflooper :: D -> D -> Sig -> Sig -> Sf -> Sig -> Sig -> Sig -> (Sig, Sig)

Plays a SoundFont2 (SF2) sample preset, generating a stereo sound, with user-defined time-varying crossfade looping.

Plays a SoundFont2 (SF2) sample preset, generating a stereo sound, similarly to sfplay. Unlike that opcode, though, it ignores the looping points set in the SF2 file and substitutes them for a user-defined crossfade loop. It is a cross between sfplay and flooper2.

ar1, ar2  sflooper  ivel, inotenum, kamp, kpitch, ipreindex, kloopstart, kloopend, kcrossfade \
          [, istart, imode, ifenv, iskip] 

csound doc: http://csound.com/docs/manual/sflooper.html

sfload :: Str -> D

Loads an entire SoundFont2 (SF2) sample file into memory.

Loads an entire SoundFont2 (SF2) sample file into memory. These opcodes allow management the sample-structure of SF2 files. In order to understand the usage of these opcodes, the user must have some knowledge of the SF2 format, so a brief description of this format can be found in the SoundFont2 File Format Appendix.

ir  sfload  "filename"

csound doc: http://csound.com/docs/manual/sfload.html

sfinstrm :: D -> D -> Sig -> Sig -> D -> Sf -> Sig

Plays a SoundFont2 (SF2) sample instrument, generating a mono sound.

Plays a SoundFont2 (SF2) sample instrument, generating a mono sound. These opcodes allow management the sample-structure of SF2 files. In order to understand the usage of these opcodes, the user must have some knowledge of the SF2 format, so a brief description of this format can be found in the SoundFont2 File Format Appendix.

ares  sfinstrm  ivel, inotenum, xamp, xfreq, instrnum, ifilhandle \
          [, iflag] [, ioffset]

csound doc: http://csound.com/docs/manual/sfinstrm.html

sfinstr3m :: D -> D -> Sig -> Sig -> D -> Sf -> Sig

Plays a SoundFont2 (SF2) sample instrument, generating a mono sound with cubic interpolation.

Plays a SoundFont2 (SF2) sample instrument, generating a mono sound with cubic interpolation. These opcodes allow management the sample-structure of SF2 files. In order to understand the usage of these opcodes, the user must have some knowledge of the SF2 format, so a brief description of this format can be found in the SoundFont2 File Format Appendix.

ares  sfinstr3m  ivel, inotenum, xamp, xfreq, instrnum, ifilhandle \
          [, iflag] [, ioffset]

csound doc: http://csound.com/docs/manual/sfinstr3m.html

sfinstr3 :: D -> D -> Sig -> Sig -> D -> Sf -> (Sig, Sig)

Plays a SoundFont2 (SF2) sample instrument, generating a stereo sound with cubic interpolation.

Plays a SoundFont2 (SF2) sample instrument, generating a stereo sound with cubic interpolation. These opcodes allow management the sample-structure of SF2 files. In order to understand the usage of these opcodes, the user must have some knowledge of the SF2 format, so a brief description of this format can be found in the SoundFont2 File Format Appendix.

ar1, ar2  sfinstr3  ivel, inotenum, xamp, xfreq, instrnum, ifilhandle \
          [, iflag] [, ioffset]

csound doc: http://csound.com/docs/manual/sfinstr3.html

sfinstr :: D -> D -> Sig -> Sig -> D -> Sf -> (Sig, Sig)

Plays a SoundFont2 (SF2) sample instrument, generating a stereo sound.

Plays a SoundFont2 (SF2) sample instrument, generating a stereo sound. These opcodes allow management the sample-structure of SF2 files. In order to understand the usage of these opcodes, the user must have some knowledge of the SF2 format, so a brief description of this format can be found in the SoundFont2 File Format Appendix.

ar1, ar2  sfinstr  ivel, inotenum, xamp, xfreq, instrnum, ifilhandle \
          [, iflag] [, ioffset]

csound doc: http://csound.com/docs/manual/sfinstr.html

sfilist :: Sf -> SE ()

Prints a list of all instruments of a previously loaded SoundFont2 (SF2) file.

Prints a list of all instruments of a previously loaded SoundFont2 (SF2) sample file. These opcodes allow management the sample-structure of SF2 files. In order to understand the usage of these opcodes, the user must have some knowledge of the SF2 format, so a brief description of this format can be found in the SoundFont2 File Format Appendix.

 sfilist  ifilhandle

csound doc: http://csound.com/docs/manual/sfilist.html

lposcilsa2 :: Sig -> Sig -> Sig -> Sig -> D -> (Sig, Sig)

Read stereo sampled sound from a table with looping and high precision.

lposcilsa2 reads stereo sampled sound from a table with looping and high precision.

ar1, ar2  lposcilsa2  aamp, kfreqratio, kloop, kend, ift [,iphs] 

csound doc: http://csound.com/docs/manual/lposcilsa2.html

lposcilsa :: Sig -> Sig -> Sig -> Sig -> D -> (Sig, Sig)

Read stereo sampled sound from a table with looping and high precision.

lposcilsa reads stereo sampled sound from a table with looping and high precision.

ar1, ar2  lposcilsa  aamp, kfreqratio, kloop, kend, ift [,iphs] 

csound doc: http://csound.com/docs/manual/lposcilsa.html

lposcila :: Sig -> Sig -> Sig -> Sig -> D -> Sig

Read sampled sound from a table with looping and high precision.

lposcila reads sampled sound from a table with looping and high precision.

ar  lposcila  aamp, kfreqratio, kloop, kend, ift [,iphs] 

csound doc: http://csound.com/docs/manual/lposcila.html

lposcil3 :: Sig -> Sig -> Sig -> Sig -> Tab -> Sig

Read sampled sound from a table with high precision and cubic interpolation.

Read sampled sound (mono or stereo) from a table, with looping, and high precision. lposcil3 uses cubic interpolation.

ares  lposcil3  kamp, kfreqratio, kloop, kend, ifn [, iphs]

csound doc: http://csound.com/docs/manual/lposcil3.html

lposcil :: Sig -> Sig -> Sig -> Sig -> Tab -> Sig

Read sampled sound from a table with looping and high precision.

Read sampled sound (mono or stereo) from a table, with looping, and high precision.

ares  lposcil  kamp, kfreqratio, kloop, kend, ifn [, iphs]

csound doc: http://csound.com/docs/manual/lposcil.html

lphasor :: Sig -> Sig

Generates a table index for sample playback

This opcode can be used to generate table index for sample playback (e.g. tablexkt).

ares  lphasor  xtrns [, ilps] [, ilpe] [, imode] [, istrt] [, istor]

csound doc: http://csound.com/docs/manual/lphasor.html

loscilx :: Tuple a => Sig -> Sig -> Tab -> a

Read multi-channel sampled sound from a table.

Read sampled sound (up to 16 channels) from a table, with optional sustain and release looping.

ar1 [, ar2, ar3, ar4, ar5, ar6, ar7, ar8, ar9, ar10, ar11, ar12, ar13, ar14, \
          ar15, ar16]  loscilx  xamp, kcps, ifn \
          [, iwsize, ibas, istrt, imod, ibeg, iend]

csound doc: http://csound.com/docs/manual/loscilx.html

loscil3 :: Tuple a => Sig -> Sig -> Tab -> a

Read sampled sound from a table using cubic interpolation.

Read sampled sound (mono or stereo) from a table, with optional sustain and release looping, using cubic interpolation.

ar1 [,ar2]  loscil3  xamp, kcps, ifn [, ibas] [, imod1] [, ibeg1] [, iend1] \
          [, imod2] [, ibeg2] [, iend2]

csound doc: http://csound.com/docs/manual/loscil3.html

loscil :: Tuple a => Sig -> Sig -> Tab -> a

Read sampled sound from a table.

Read sampled sound (mono or stereo) from a table, with optional sustain and release looping.

ar1 [,ar2]  loscil  xamp, kcps, ifn [, ibas] [, imod1] [, ibeg1] [, iend1] \
          [, imod2] [, ibeg2] [, iend2]

csound doc: http://csound.com/docs/manual/loscil.html

fluidSetInterpMethod :: D -> D -> D -> SE ()

Set interpolation method for channel in Fluid Engine

Set interpolation method for channel in Fluid Engine. Lower order interpolation methods will render faster at lower fidelity while higher order interpolation methods will render slower at higher fidelity. Default interpolation for a channel is 4th order interpolation.

 fluidSetInterpMethod  ienginenum, ichannelnum, iInterpMethod

csound doc: http://csound.com/docs/manual/fluidSetInterpMethod.html

fluidProgramSelect :: D -> D -> Tab -> D -> D -> SE ()

Assigns a preset from a SoundFont to a channel on a fluidEngine.

 fluidProgramSelect  ienginenum, ichannelnum, isfnum, ibanknum, ipresetnum

csound doc: http://csound.com/docs/manual/fluidProgramSelect.html

fluidOut :: D -> (Sig, Sig)

Outputs sound from a given fluidEngine

Outputs the sound from a fluidEngine.

aleft, aright  fluidOut  ienginenum

csound doc: http://csound.com/docs/manual/fluidOut.html

fluidNote :: D -> D -> D -> D -> SE ()

Plays a note on a channel in a fluidSynth engine.

Plays a note at imidikey pitch and imidivel velocity on ichannelnum channel of number ienginenum fluidEngine.

 fluidNote  ienginenum, ichannelnum, imidikey, imidivel

csound doc: http://csound.com/docs/manual/fluidNote.html

fluidLoad :: D -> D -> Tab

Loads a SoundFont into a fluidEngine, optionally listing SoundFont contents.

Loads a SoundFont into an instance of a fluidEngine, optionally listing banks and presets for SoundFont.

isfnum  fluidLoad  soundfont, ienginenum[, ilistpresets]

csound doc: http://csound.com/docs/manual/fluidLoad.html

fluidEngine :: D

Instantiates a fluidsynth engine.

Instantiates a fluidsynth engine, and returns ienginenum to identify the engine. ienginenum is passed to other other opcodes for loading and playing SoundFonts and gathering the generated sound.

ienginenum  fluidEngine  [iReverbEnabled] [, iChorusEnabled] [,iNumChannels] [, iPolyphony] 

csound doc: http://csound.com/docs/manual/fluidEngine.html

fluidControl :: D -> Sig -> Sig -> Sig -> Sig -> SE ()

Sends MIDI note on, note off, and other messages to a SoundFont preset.

The fluid opcodes provide a simple Csound opcode wrapper around Peter Hanappe's Fluidsynth SoundFont2 synthesizer. This implementation accepts any MIDI note on, note off, controller, pitch bend, or program change message at k-rate. Maximum polyphony is 4096 simultaneously sounding voices. Any number of SoundFonts may be loaded and played simultaneously.

 fluidControl  ienginenum, kstatus, kchannel, kdata1, kdata2

csound doc: http://csound.com/docs/manual/fluidControl.html

fluidCCk :: D -> D -> D -> Sig -> SE ()

Sends a MIDI controller data message to fluid.

Sends a MIDI controller data (MIDI controller number and value to use) message to a fluid engine by number on the user specified MIDI channel number.

 fluidCCk  iEngineNumber, iChannelNumber, iControllerNumber, kValue

csound doc: http://csound.com/docs/manual/fluidCCk.html

fluidCCi :: D -> D -> D -> D -> SE ()

Sends a MIDI controller data message to fluid.

Sends a MIDI controller data (MIDI controller number and value to use) message to a fluid engine by number on the user specified MIDI channel number.

 fluidCCi  iEngineNumber, iChannelNumber, iControllerNumber, iValue

csound doc: http://csound.com/docs/manual/fluidCCi.html

fluidAllOut :: (Sig, Sig)

Collects all audio from all Fluidsynth engines in a performance

aleft, aright  fluidAllOut 

csound doc: http://csound.com/docs/manual/fluidAllOut.html

flooper2 :: Tuple a => Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> a

Function-table-based crossfading looper.

This opcode implements a crossfading looper with variable loop parameters and three looping modes, optionally using a table for its crossfade shape. It accepts non-power-of-two tables for its source sounds, such as deferred-allocation GEN01 tables, with one or two channels.

asig1[,asig2]  flooper2  kamp, kpitch, kloopstart, kloopend, kcrossfade, ifn \
          [, istart, imode, ifenv, iskip]

csound doc: http://csound.com/docs/manual/flooper2.html

flooper :: Tuple a => Sig -> Sig -> D -> D -> D -> Tab -> a

Function-table-based crossfading looper.

This opcode reads audio from a function table and plays it back in a loop with user-defined start time, duration and crossfade time. It also allows the pitch of the loop to be controlled, including reversed playback. It accepts non-power-of-two tables, such as deferred-allocation GEN01 tables, with one or two channels.

asig1[, asig2]  flooper  kamp, kpitch, istart, idur, ifad, ifn

csound doc: http://csound.com/docs/manual/flooper.html

bbcuts :: Sig -> Sig -> D -> D -> D -> D -> D -> (Sig, Sig)

Generates breakbeat-style cut-ups of a stereo audio stream.

The BreakBeat Cutter automatically generates cut-ups of a source audio stream in the style of drum and bass/jungle breakbeat manipulations. There are two versions, for mono (bbcutm) or stereo (bbcuts) sources. Whilst originally based on breakbeat cutting, the opcode can be applied to any type of source audio.

a1,a2  bbcuts  asource1, asource2, ibps, isubdiv, ibarlength, iphrasebars, \
          inumrepeats [, istutterspeed] [, istutterchance] [, ienvchoice]

csound doc: http://csound.com/docs/manual/bbcuts.html

bbcutm :: Sig -> D -> D -> D -> D -> D -> Sig

Generates breakbeat-style cut-ups of a mono audio stream.

The BreakBeat Cutter automatically generates cut-ups of a source audio stream in the style of drum and bass/jungle breakbeat manipulations. There are two versions, for mono (bbcutm) or stereo (bbcuts) sources. Whilst originally based on breakbeat cutting, the opcode can be applied to any type of source audio.

a1  bbcutm  asource, ibps, isubdiv, ibarlength, iphrasebars, inumrepeats \
          [, istutterspeed] [, istutterchance] [, ienvchoice ]

csound doc: http://csound.com/docs/manual/bbcutm.html

weibull :: SigOrD a => a -> a -> SE a

Weibull distribution random number generator (positive values only).

Weibull distribution random number generator (positive values only). This is an x-class noise generator

ares  weibull  ksigma, ktau
ires  weibull  ksigma, ktau
kres  weibull  ksigma, ktau

csound doc: http://csound.com/docs/manual/weibull.html

urandom :: SigOrD a => SE a

truly random opcodes with controllable range.

Truly random opcodes with controllable range. These units are for Unix-like systems only and use devurandom to construct Csound random values

ax  urandom  [imin, imax]
ix  urandom  [imin, imax]
kx  urandom  [imin, imax]

csound doc: http://csound.com/docs/manual/urandom.html

unirand :: SigOrD a => a -> SE a

Uniform distribution random number generator (positive values only).

Uniform distribution random number generator (positive values only). This is an x-class noise generator.

ares  unirand  krange
ires  unirand  krange
kres  unirand  krange

csound doc: http://csound.com/docs/manual/unirand.html

trirand :: SigOrD a => a -> SE a

Triangular distribution random number generator

Triangular distribution random number generator. This is an x-class noise generator.

ares  trirand  krange
ires  trirand  krange
kres  trirand  krange

csound doc: http://csound.com/docs/manual/trirand.html

trandom :: Sig -> Sig -> Sig -> SE Sig

Generates a controlled pseudo-random number series between min and max values according to a trigger.

Generates a controlled pseudo-random number series between min and max values at k-rate whenever the trigger parameter is different to 0.

kout  trandom  ktrig, kmin, kmax

csound doc: http://csound.com/docs/manual/trandom.html

seed :: D -> SE ()

Sets the global seed value.

Sets the global seed value for all x-class noise generators, as well as other opcodes that use a random call, such as grain.

 seed  ival

csound doc: http://csound.com/docs/manual/seed.html

rspline :: Sig -> Sig -> Sig -> Sig -> SE Sig

Generate random spline curves.

ares  rspline  xrangeMin, xrangeMax, kcpsMin, kcpsMax
kres  rspline  krangeMin, krangeMax, kcpsMin, kcpsMax

csound doc: http://csound.com/docs/manual/rspline.html

rnd31 :: SigOrD a => a -> a -> SE a

31-bit bipolar random opcodes with controllable distribution.

31-bit bipolar random opcodes with controllable distribution. These units are portable, i.e. using the same seed value will generate the same random sequence on all systems. The distribution of generated random numbers can be varied at k-rate.

ax  rnd31  kscl, krpow [, iseed]
ix  rnd31  iscl, irpow [, iseed]
kx  rnd31  kscl, krpow [, iseed]

csound doc: http://csound.com/docs/manual/rnd31.html

randomi :: Sig -> Sig -> Sig -> SE Sig

Generates a user-controlled random number series with interpolation between each new number.

ares  randomi  kmin, kmax, xcps [,imode] [,ifirstval]
kres  randomi  kmin, kmax, kcps [,imode] [,ifirstval]

csound doc: http://csound.com/docs/manual/randomi.html

randomh :: Sig -> Sig -> Sig -> SE Sig

Generates random numbers with a user-defined limit and holds them for a period of time.

ares  randomh  kmin, kmax, xcps [,imode] [,ifirstval]
kres  randomh  kmin, kmax, kcps [,imode] [,ifirstval]

csound doc: http://csound.com/docs/manual/randomh.html

random :: SigOrD a => a -> a -> SE a

Generates a controlled pseudo-random number series between min and max values.

Generates is a controlled pseudo-random number series between min and max values.

ares  random  kmin, kmax
ires  random  imin, imax
kres  random  kmin, kmax

csound doc: http://csound.com/docs/manual/random.html

randi :: Sig -> Sig -> SE Sig

Generates a controlled random number series with interpolation between each new number.

ares  randi  xamp, xcps [, iseed] [, isize] [, ioffset]
kres  randi  kamp, kcps [, iseed] [, isize] [, ioffset]

csound doc: http://csound.com/docs/manual/randi.html

randh :: Sig -> Sig -> SE Sig

Generates random numbers and holds them for a period of time.

ares  randh  xamp, xcps [, iseed] [, isize] [, ioffset]
kres  randh  kamp, kcps [, iseed] [, isize] [, ioffset]

csound doc: http://csound.com/docs/manual/randh.html

rand :: Sig -> SE Sig

Generates a controlled random number series.

Output is a controlled random number series between -amp and +amp

ares  rand  xamp [, iseed] [, isel] [, ioffset]
kres  rand  xamp [, iseed] [, isel] [, ioffset]

csound doc: http://csound.com/docs/manual/rand.html

poisson :: SigOrD a => a -> SE a

Poisson distribution random number generator (positive values only).

Poisson distribution random number generator (positive values only). This is an x-class noise generator.

ares  poisson  klambda
ires  poisson  klambda
kres  poisson  klambda

csound doc: http://csound.com/docs/manual/poisson.html

pinkish :: Sig -> SE Sig

Generates approximate pink noise.

Generates approximate pink noise (-3dB/oct response) by one of two different methods:

ares  pinkish  xin [, imethod] [, inumbands] [, iseed] [, iskip]

csound doc: http://csound.com/docs/manual/pinkish.html

pinker :: SE Sig

Generates pink noise.

Generates pink noise (-3dB/oct response) by the New Shade of Pink algorithm of Stefan Stenzel.

ares  pinker 

csound doc: http://csound.com/docs/manual/pinker.html

pcauchy :: SigOrD a => a -> SE a

Cauchy distribution random number generator (positive values only).

Cauchy distribution random number generator (positive values only). This is an x-class noise generator.

ares  pcauchy  kalpha
ires  pcauchy  kalpha
kres  pcauchy  kalpha

csound doc: http://csound.com/docs/manual/pcauchy.html

noise :: Sig -> Sig -> SE Sig

A white noise generator with an IIR lowpass filter.

ares  noise  xamp, kbeta

csound doc: http://csound.com/docs/manual/noise.html

linrand :: SigOrD a => a -> SE a

Linear distribution random number generator (positive values only).

Linear distribution random number generator (positive values only). This is an x-class noise generator.

ares  linrand  krange
ires  linrand  krange
kres  linrand  krange

csound doc: http://csound.com/docs/manual/linrand.html

jspline :: Sig -> Sig -> Sig -> SE Sig

A jitter-spline generator.

ares  jspline  xamp, kcpsMin, kcpsMax
kres  jspline  kamp, kcpsMin, kcpsMax

csound doc: http://csound.com/docs/manual/jspline.html

jitter2 :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> SE Sig

Generates a segmented line with user-controllable random segments.

kout  jitter2  ktotamp, kamp1, kcps1,
        kamp2, kcps2, kamp3, kcps3[ , iopt]

csound doc: http://csound.com/docs/manual/jitter2.html

jitter :: Sig -> Sig -> Sig -> SE Sig

Generates a segmented line whose segments are randomly generated.

kout  jitter  kamp, kcpsMin, kcpsMax

csound doc: http://csound.com/docs/manual/jitter.html

getseed :: SE Sig

Reads the global seed value.

Returns the global seed value used for all x-class noise generators.

ians getseed 
kans getseed 

csound doc: http://csound.com/docs/manual/getseed.html

gausstrig :: Sig -> Sig -> Sig -> SE Sig

Random impulses around a certain frequency.

Generates random impulses around a certain frequency.

ares  gausstrig  kamp, kcps, kdev [, imode] [, ifrst1]
kres  gausstrig  kamp, kcps, kdev [, imode] [, ifrst1]

csound doc: http://csound.com/docs/manual/gausstrig.html

gaussi :: SigOrD a => a -> a -> a -> SE a

Gaussian distribution random number generator with interpolation.

Gaussian distribution random number generator with controlled interpolation between values. This is an x-class noise generator.

ares  gaussi  krange, xamp, xcps
ires  gaussi  krange, xamp, xcps
kres  gaussi  krange, xamp, xcps

csound doc: http://csound.com/docs/manual/gaussi.html

gauss :: Sig -> SE Sig

Gaussian distribution random number generator.

Gaussian distribution random number generator. This is an x-class noise generator.

ares  gauss  krange
ires  gauss  krange
kres  gauss  krange

csound doc: http://csound.com/docs/manual/gauss.html

fractalnoise :: Sig -> Sig -> SE Sig

A fractal noise generator.

A fractal noise generator implemented as a white noise filtered by a cascade of 15 first-order filters.

ares  fractalnoise  kamp, kbeta

csound doc: http://csound.com/docs/manual/fractalnoise.html

exprandi :: SigOrD a => a -> a -> a -> SE a

Exponential distribution random number generator with interpolation (positive values only).

Exponential distribution random number generator with controlled interpolation between values (positive values only). This is an x-class noise generator.

ares  exprandi  klambda, xamp, xcps
ires  exprandi  klambda, xamp, xcps
kres  exprandi  klambda, xamp, xcps

csound doc: http://csound.com/docs/manual/exprandi.html

exprand :: SigOrD a => a -> SE a

Exponential distribution random number generator (positive values only).

Exponential distribution random number generator (positive values only). This is an x-class noise generator.

ares  exprand  klambda
ires  exprand  klambda
kres  exprand  klambda

csound doc: http://csound.com/docs/manual/exprand.html

dust2 :: Sig -> Sig -> SE Sig

Random impulses.

Generates random impulses from -1 to 1.

ares  dust2  kamp, kdensity
kres  dust2  kamp, kdensity

csound doc: http://csound.com/docs/manual/dust2.html

cauchyi :: SigOrD a => a -> a -> a -> SE a

Cauchy distribution random number generator with interpolation.

Cauchy distribution random number generator with controlled interpolation between values. This is an x-class noise generator.

ares  cauchyi  klambda, xamp, xcps
ires  cauchyi  klambda, xamp, xcps
kres  cauchyi  klambda, xamp, xcps

csound doc: http://csound.com/docs/manual/cauchyi.html

cauchy :: SigOrD a => a -> SE a

Cauchy distribution random number generator.

Cauchy distribution random number generator. This is an x-class noise generator.

ares  cauchy  kalpha
ires  cauchy  kalpha
kres  cauchy  kalpha

csound doc: http://csound.com/docs/manual/cauchy.html

bexprnd :: SigOrD a => a -> SE a

Exponential distribution random number generator.

Exponential distribution random number generator. This is an x-class noise generator.

ares  bexprnd  krange
ires  bexprnd  krange
kres  bexprnd  krange

csound doc: http://csound.com/docs/manual/bexprnd.html

betarand :: SigOrD a => a -> a -> a -> SE a

Beta distribution random number generator (positive values only).

Beta distribution random number generator (positive values only). This is an x-class noise generator.

ares  betarand  krange, kalpha, kbeta
ires  betarand  krange, kalpha, kbeta
kres  betarand  krange, kalpha, kbeta

csound doc: http://csound.com/docs/manual/betarand.html

syncphasor :: Sig -> Sig -> (Sig, Sig)

Produces a normalized moving phase value with sync input and output.

Produces a moving phase value between zero and one and an extra impulse output ("sync out") whenever its phase value crosses or is reset to zero. The phase can be reset at any time by an impulse on the "sync in" parameter.

aphase, asyncout  syncphasor  xcps, asyncin, [, iphs]

csound doc: http://csound.com/docs/manual/syncphasor.html

sc_phasor :: Sig -> Sig -> Sig -> Sig -> Sig

A resettable linear ramp between two levels

A resettable linear ramp between two levels. Port of Supercollider's Phasor.

aindex  sc_phasor  xtrig, xrate, kstart, kend [, kresetPos] 
kindex  sc_phasor  xtrig, xrate, kstart, kend [, kresetPos] 

csound doc: http://csound.com/docs/manual/sc_phasor.html

phasorbnk :: Sig -> Sig -> D -> Sig

Produce an arbitrary number of normalized moving phase values.

Produce an arbitrary number of normalized moving phase values, accessable by an index.

ares  phasorbnk  xcps, kndx, icnt [, iphs]
kres  phasorbnk  kcps, kndx, icnt [, iphs]

csound doc: http://csound.com/docs/manual/phasorbnk.html

phasor :: Sig -> Sig

Produce a normalized moving phase value.

ares  phasor  xcps [, iphs]
kres  phasor  kcps [, iphs]

csound doc: http://csound.com/docs/manual/phasor.html

voice :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Tab -> Sig

An emulation of a human voice.

ares  voice  kamp, kfreq, kphoneme, kform, kvibf, kvamp, ifn, ivfn

csound doc: http://csound.com/docs/manual/voice.html

vibes :: Sig -> Sig -> D -> D -> D -> Sig -> Sig -> Tab -> D -> Sig

Physical model related to the striking of a metal block.

Audio output is a tone related to the striking of a metal block as found in a vibraphone. The method is a physical model developed from Perry Cook, but re-coded for Csound.

ares  vibes  kamp, kfreq, ihrd, ipos, imp, kvibf, kvamp, ivibfn, idec

csound doc: http://csound.com/docs/manual/vibes.html

tambourine :: Sig -> D -> Sig

Semi-physical model of a tambourine sound.

tambourine is a semi-physical model of a tambourine sound. It is one of the PhISEM percussion opcodes. PhISEM (Physically Informed Stochastic Event Modeling) is an algorithmic approach for simulating collisions of multiple independent sound producing objects.

ares  tambourine  kamp, idettack [, inum] [, idamp] [, imaxshake] [, ifreq] \
          [, ifreq1] [, ifreq2]

csound doc: http://csound.com/docs/manual/tambourine.html

stix :: D -> D -> Sig

Semi-physical model of a stick sound.

stix is a semi-physical model of a stick sound. It is one of the PhISEM percussion opcodes. PhISEM (Physically Informed Stochastic Event Modeling) is an algorithmic approach for simulating collisions of multiple independent sound producing objects.

ares  stix  iamp, idettack [, inum] [, idamp] [, imaxshake]

csound doc: http://csound.com/docs/manual/stix.html

sleighbells :: Sig -> D -> Sig

Semi-physical model of a sleighbell sound.

sleighbells is a semi-physical model of a sleighbell sound. It is one of the PhISEM percussion opcodes. PhISEM (Physically Informed Stochastic Event Modeling) is an algorithmic approach for simulating collisions of multiple independent sound producing objects.

ares  sleighbells  kamp, idettack [, inum] [, idamp] [, imaxshake] [, ifreq] \
          [, ifreq1] [, ifreq2]

csound doc: http://csound.com/docs/manual/sleighbells.html

shaker :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Sounds like the shaking of a maraca or similar gourd instrument.

Audio output is a tone related to the shaking of a maraca or similar gourd instrument. The method is a physically inspired model developed from Perry Cook, but re-coded for Csound.

ares  shaker  kamp, kfreq, kbeans, kdamp, ktimes [, idecay]

csound doc: http://csound.com/docs/manual/shaker.html

sekere :: D -> D -> Sig

Semi-physical model of a sekere sound.

sekere is a semi-physical model of a sekere sound. It is one of the PhISEM percussion opcodes. PhISEM (Physically Informed Stochastic Event Modeling) is an algorithmic approach for simulating collisions of multiple independent sound producing objects.

ares  sekere  iamp, idettack [, inum] [, idamp] [, imaxshake]

csound doc: http://csound.com/docs/manual/sekere.html

sandpaper :: D -> D -> Sig

Semi-physical model of a sandpaper sound.

sandpaper is a semi-physical model of a sandpaper sound. It is one of the PhISEM percussion opcodes. PhISEM (Physically Informed Stochastic Event Modeling) is an algorithmic approach for simulating collisions of multiple independent sound producing objects.

ares  sandpaper  iamp, idettack [, inum] [, idamp] [, imaxshake]

csound doc: http://csound.com/docs/manual/sandpaper.html

prepiano :: D -> D -> D -> D -> D -> D -> Sig -> Sig -> D -> D -> D -> D -> D -> D -> D -> (Sig, Sig)

Creates a tone similar to a piano string prepared in a Cageian fashion.

Audio output is a tone similar to a piano string, prepared with a number of rubbers and rattles. The method uses a physical model developed from solving the partial differential equation.

ares  prepiano  ifreq, iNS, iD, iK, \
        iT30,iB, kbcl, kbcr, imass, ihvfreq, iinit, ipos, ivel, isfreq, \
        isspread[, irattles, irubbers]
al,ar  prepiano  ifreq, iNS, iD, iK, \
        iT30,iB, kbcl, kbcr, imass, ihvfreq, iinit, ipos, ivel, isfreq, \
        isspread[, irattles, irubbers]

csound doc: http://csound.com/docs/manual/prepiano.html

planet :: Sig -> Sig -> Sig -> D -> D -> D -> D -> D -> D -> D -> (Sig, Sig, Sig)

Simulates a planet orbiting in a binary star system.

planet simulates a planet orbiting in a binary star system. The outputs are the x, y and z coordinates of the orbiting planet. It is possible for the planet to achieve escape velocity by a close encounter with a star. This makes this system somewhat unstable.

ax, ay, az  planet  kmass1, kmass2, ksep, ix, iy, iz, ivx, ivy, ivz, idelta \
          [, ifriction] [, iskip]

csound doc: http://csound.com/docs/manual/planet.html

moog :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Tab -> Tab -> Sig

An emulation of a mini-Moog synthesizer.

ares  moog  kamp, kfreq, kfiltq, kfiltrate, kvibf, kvamp, iafn, iwfn, ivfn

csound doc: http://csound.com/docs/manual/moog.html

marimba :: Sig -> Sig -> D -> D -> D -> Sig -> Sig -> Tab -> D -> Sig

Physical model related to the striking of a wooden block.

Audio output is a tone related to the striking of a wooden block as found in a marimba. The method is a physical model developed from Perry Cook but re-coded for Csound.

ares  marimba  kamp, kfreq, ihrd, ipos, imp, kvibf, kvamp, ivibfn, idec \
          [, idoubles] [, itriples]

csound doc: http://csound.com/docs/manual/marimba.html

mandol :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

An emulation of a mandolin.

ares  mandol  kamp, kfreq, kpluck, kdetune, kgain, ksize \
        [, ifn] [, iminfreq]

csound doc: http://csound.com/docs/manual/mandol.html

mandel :: Sig -> Sig -> Sig -> Sig -> (Sig, Sig)

Mandelbrot set

Returns the number of iterations corresponding to a given point of complex plane by applying the Mandelbrot set formula.

kiter, koutrig  mandel   ktrig, kx, ky, kmaxIter

csound doc: http://csound.com/docs/manual/mandel.html

lorenz :: Sig -> Sig -> Sig -> Sig -> D -> D -> D -> D -> (Sig, Sig, Sig)

Implements the Lorenz system of equations.

Implements the Lorenz system of equations. The Lorenz system is a chaotic-dynamic system which was originally used to simulate the motion of a particle in convection currents and simplified weather systems. Small differences in initial conditions rapidly lead to diverging values. This is sometimes expressed as the butterfly effect. If a butterfly flaps its wings in Australia, it will have an effect on the weather in Alaska. This system is one of the milestones in the development of chaos theory. It is useful as a chaotic audio source or as a low frequency modulation source.

ax, ay, az  lorenz  ksv, krv, kbv, kh, ix, iy, iz, iskip [, iskipinit]

csound doc: http://csound.com/docs/manual/lorenz.html

guiro :: Sig -> D -> Sig

Semi-physical model of a guiro sound.

guiro is a semi-physical model of a guiro sound. It is one of the PhISEM percussion opcodes. PhISEM (Physically Informed Stochastic Event Modeling) is an algorithmic approach for simulating collisions of multiple independent sound producing objects.

ares  guiro  kamp, idettack [, inum] [, idamp] [, imaxshake] [, ifreq] [, ifreq1]

csound doc: http://csound.com/docs/manual/guiro.html

gogobel :: Sig -> Sig -> D -> D -> D -> Sig -> Sig -> Tab -> Sig

Audio output is a tone related to the striking of a cow bell or similar.

Audio output is a tone related to the striking of a cow bell or similar. The method is a physical model developed from Perry Cook, but re-coded for Csound.

ares  gogobel  kamp, kfreq, ihrd, ipos, imp, kvibf, kvamp, ivfn

csound doc: http://csound.com/docs/manual/gogobel.html

gendyx :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Variation of the dynamic stochastic approach to waveform synthesis conceived by Iannis Xenakis.

gendyx (gendy eXtended) is an implementation of the Génération Dynamique Stochastique (GENDYN), a dynamic stochastic approach to waveform synthesis conceived by Iannis Xenakis, using curves instead of segments.

ares  gendyx  kamp, kampdist, kdurdist, kadpar, kddpar, kminfreq, kmaxfreq, \
                kampscl, kdurscl, kcurveup, kcurvedown [, initcps] [, knum]
kres  gendyx  kamp, kampdist, kdurdist, kadpar, kddpar, kminfreq, kmaxfreq, \
                kampscl, kdurscl, kcurveup, kcurvedown [, initcps] [, knum]

csound doc: http://csound.com/docs/manual/gendyx.html

gendyc :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Dynamic stochastic approach to waveform synthesis using cubic interpolation.

Implementation with cubic interpolation of the Génération Dynamique Stochastique (GENDYN), a dynamic stochastic approach to waveform synthesis conceived by Iannis Xenakis.

ares  gendyc  kamp, kampdist, kdurdist, kadpar, kddpar, kminfreq, kmaxfreq, \
                kampscl, kdurscl [, initcps] [, knum]
kres  gendyc  kamp, kampdist, kdurdist, kadpar, kddpar, kminfreq, kmaxfreq, \
                kampscl, kdurscl [, initcps] [, knum]

csound doc: http://csound.com/docs/manual/gendyc.html

gendy :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Dynamic stochastic approach to waveform synthesis conceived by Iannis Xenakis.

Implementation of the Génération Dynamique Stochastique (GENDYN), a dynamic stochastic approach to waveform synthesis conceived by Iannis Xenakis.

ares  gendy  kamp, kampdist, kdurdist, kadpar, kddpar, kminfreq, kmaxfreq, \
               kampscl, kdurscl [, initcps] [, knum]
kres  gendy  kamp, kampdist, kdurdist, kadpar, kddpar, kminfreq, kmaxfreq, \
               kampscl, kdurscl [, initcps] [, knum]

csound doc: http://csound.com/docs/manual/gendy.html

dripwater :: Sig -> D -> Sig

Semi-physical model of a water drop.

dripwater is a semi-physical model of a water drop. It is one of the PhISEM percussion opcodes. PhISEM (Physically Informed Stochastic Event Modeling) is an algorithmic approach for simulating collisions of multiple independent sound producing objects.

ares  dripwater  kamp, idettack [, inum] [, idamp] [, imaxshake] [, ifreq] \
          [, ifreq1] [, ifreq2]

csound doc: http://csound.com/docs/manual/dripwater.html

crunch :: D -> D -> Sig

Semi-physical model of a crunch sound.

crunch is a semi-physical model of a crunch sound. It is one of the PhISEM percussion opcodes. PhISEM (Physically Informed Stochastic Event Modeling) is an algorithmic approach for simulating collisions of multiple independent sound producing objects.

ares  crunch  iamp, idettack [, inum] [, idamp] [, imaxshake]

csound doc: http://csound.com/docs/manual/crunch.html

chuap :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> D -> D -> D -> Sig -> (Sig, Sig, Sig)

Simulates Chua's oscillator, an LRC oscillator with an active resistor, proved capable of bifurcation and chaotic attractors, with k-rate control of circuit elements.

aI3, aV2, aV1  chuap  kL, kR0, kC1, kG, kGa, kGb, kE, kC2, iI3, iV2, iV1, ktime_step

csound doc: http://csound.com/docs/manual/chuap.html

cabasa :: D -> D -> Sig

Semi-physical model of a cabasa sound.

cabasa is a semi-physical model of a cabasa sound. It is one of the PhISEM percussion opcodes. PhISEM (Physically Informed Stochastic Event Modeling) is an algorithmic approach for simulating collisions of multiple independent sound producing objects.

ares  cabasa  iamp, idettack [, inum] [, idamp] [, imaxshake]

csound doc: http://csound.com/docs/manual/cabasa.html

barmodel :: Sig -> Sig -> D -> D -> Sig -> D -> D -> D -> D -> Sig

Creates a tone similar to a struck metal bar.

Audio output is a tone similar to a struck metal bar, using a physical model developed from solving the partial differential equation. There are controls over the boundary conditions as well as the bar characteristics.

ares  barmodel  kbcL, kbcR, iK, ib, kscan, iT30, ipos, ivel, iwid

csound doc: http://csound.com/docs/manual/barmodel.html

bamboo :: Sig -> D -> Sig

Semi-physical model of a bamboo sound.

bamboo is a semi-physical model of a bamboo sound. It is one of the PhISEM percussion opcodes. PhISEM (Physically Informed Stochastic Event Modeling) is an algorithmic approach for simulating collisions of multiple independent sound producing objects.

ares  bamboo  kamp, idettack [, inum] [, idamp] [, imaxshake] [, ifreq] \
          [, ifreq1] [, ifreq2]

csound doc: http://csound.com/docs/manual/bamboo.html

xadsr :: D -> D -> D -> D -> Sig

Calculates the classical ADSR envelope.

Calculates the classical ADSR envelope

ares  xadsr  iatt, idec, islev, irel [, idel]
kres  xadsr  iatt, idec, islev, irel [, idel]

csound doc: http://csound.com/docs/manual/xadsr.html

mxadsr :: D -> D -> D -> D -> Sig

Calculates the classical ADSR envelope using the expsegr mechanism.

ares  mxadsr  iatt, idec, islev, irel [, idel] [, ireltim]
kres  mxadsr  iatt, idec, islev, irel [, idel] [, ireltim]

csound doc: http://csound.com/docs/manual/mxadsr.html

madsr :: D -> D -> D -> D -> Sig

Calculates the classical ADSR envelope using the linsegr mechanism.

ares  madsr  iatt, idec, islev, irel [, idel] [, ireltim]
kres  madsr  iatt, idec, islev, irel [, idel] [, ireltim]

csound doc: http://csound.com/docs/manual/madsr.html

linenr :: Sig -> D -> D -> D -> Sig

The linen opcode extended with a final release segment.

linenr -- same as linen except that the final segment is entered only on sensing a MIDI note release. The note is then extended by the decay time.

ares  linenr  xamp, irise, idec, iatdec
kres  linenr  kamp, irise, idec, iatdec

csound doc: http://csound.com/docs/manual/linenr.html

linen :: Sig -> D -> D -> D -> Sig

Applies a straight line rise and decay pattern to an input amp signal.

linen -- apply a straight line rise and decay pattern to an input amp signal.

ares  linen  xamp, irise, idur, idec
kres  linen  kamp, irise, idur, idec

csound doc: http://csound.com/docs/manual/linen.html

envlpxr :: Sig -> D -> D -> Tab -> D -> D -> Sig

The envlpx opcode with a final release segment.

envlpxr is the same as envlpx except that the final segment is entered only on sensing a MIDI note release. The note is then extended by the decay time.

ares  envlpxr  xamp, irise, idec, ifn, iatss, iatdec [, ixmod] [,irind]
kres  envlpxr  kamp, irise, idec, ifn, iatss, iatdec [, ixmod] [,irind]

csound doc: http://csound.com/docs/manual/envlpxr.html

envlpx :: Sig -> D -> D -> D -> Tab -> D -> D -> Sig

Applies an envelope consisting of 3 segments.

envlpx -- apply an envelope consisting of 3 segments:

ares  envlpx  xamp, irise, idur, idec, ifn, iatss, iatdec [, ixmod]
kres  envlpx  kamp, irise, idur, idec, ifn, iatss, iatdec [, ixmod]

csound doc: http://csound.com/docs/manual/envlpx.html

adsr :: D -> D -> D -> D -> Sig

Calculates the classical ADSR envelope using linear segments.

ares  adsr  iatt, idec, islev, irel [, idel]
kres  adsr  iatt, idec, islev, irel [, idel]

csound doc: http://csound.com/docs/manual/adsr.html

xyscale :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

2D linear interpolation

2D linear interpolation between 4 points at (0,0), (1,0), (0,1), (1,1)

kout  xyscale  kx, ky, k00, k10, k01, k11

csound doc: http://csound.com/docs/manual/xyscale.html

transegr :: [D] -> D -> D -> D -> Sig

Constructs a user-definable envelope with extended release segment.

Constructs a user-definable envelope. It is the same as transeg, with an extended release segment.

ares  transegr  ia, idur, itype, ib [, idur2] [, itype] [, ic] ...
kres  transegr  ia, idur, itype, ib [, idur2] [, itype] [, ic] ...

csound doc: http://csound.com/docs/manual/transegr.html

transegb :: [D] -> Sig

Constructs a user-definable envelope in absolute time.

ares  transegb  ia, itim, itype, ib [, itim2] [, itype] [, ic] ...
kres  transegb  ia, itim, itype, ib [, itim2] [, itype] [, ic] ...

csound doc: http://csound.com/docs/manual/transegb.html

transeg :: [D] -> Sig

Constructs a user-definable envelope.

ares  transeg  ia, idur, itype, ib [, idur2] [, itype] [, ic] ...
kres  transeg  ia, idur, itype, ib [, idur2] [, itype] [, ic] ...

csound doc: http://csound.com/docs/manual/transeg.html

scale :: Sig -> Sig -> Sig -> Sig

Arbitrary signal scaling.

Scales incoming value to user-definable range. Similar to scale object found in popular dataflow languages.

kscl  scale  kinput, kmax, kmin

csound doc: http://csound.com/docs/manual/scale.html

lpsholdp :: Sig -> Sig -> [Sig] -> Sig

Control signals based on held segments.

Generate control signal consisiting of held segments delimited by two or more specified points. The entire envelope can be looped at time-variant rate. Each segment coordinate can also be varied at k-rate.

ksig  lpsholdp   kphase, kvalue0, ktime0  [, kvalue1] [, ktime1] \
          [, kvalue2] [, ktime2] [...]

csound doc: http://csound.com/docs/manual/lpsholdp.html

looptseg :: Sig -> Sig -> [Sig] -> Sig

Generate control signal consisting of exponential or linear segments delimited by two or more specified points.

Generate control signal consisting of controllable exponential segments or linear segments delimited by two or more specified points. The entire envelope is looped at kfreq rate. Each parameter can be varied at k-rate.

ksig  looptseg  kfreq, ktrig, iphase, kvalue0, ktype0, ktime0, [, kvalue1] [,ktype1] [, ktime1] \
          [, kvalue2] [,ktype2] [, ktime2] [...] [, kvalueN] [,ktypeN] [, ktimeN]

csound doc: http://csound.com/docs/manual/looptseg.html

loopsegp :: Sig -> [Sig] -> Sig

Control signals based on linear segments.

Generate control signal consisiting of linear segments delimited by two or more specified points. The entire envelope can be looped at time-variant rate. Each segment coordinate can also be varied at k-rate.

ksig  loopsegp   kphase, kvalue0, kdur0, kvalue1 \
          [, kdur1, ... , kdurN-1, kvalueN]

csound doc: http://csound.com/docs/manual/loopsegp.html

logcurve :: Sig -> Sig -> Sig

This opcode implements a formula for generating a normalised logarithmic curve in range 0 - 1. It is based on the Max / MSP work of Eric Singer (c) 1994.

Generates a logarithmic curve in range 0 to 1 of arbitrary steepness. Steepness index equal to or lower than 1.0 will result in Not-a-Number errors and cause unstable behavior.

kout  logcurve  kindex, ksteepness

csound doc: http://csound.com/docs/manual/logcurve.html

linsegr :: [D] -> D -> D -> Sig

Trace a series of line segments between specified points including a release segment.

ares  linsegr  ia, idur1, ib [, idur2] [, ic] [...], irel, iz
kres  linsegr  ia, idur1, ib [, idur2] [, ic] [...], irel, iz

csound doc: http://csound.com/docs/manual/linsegr.html

linsegb :: [D] -> Sig

Trace a series of line segments between specified absolute points.

ares  linsegb  ia, itim1, ib [, itim2] [, ic] [...]
kres  linsegb  ia, itim1, ib [, itim2] [, ic] [...]

csound doc: http://csound.com/docs/manual/linsegb.html

linseg :: [D] -> Sig

Trace a series of line segments between specified points.

ares  linseg  ia, idur1, ib [, idur2] [, ic] [...]
kres  linseg  ia, idur1, ib [, idur2] [, ic] [...]

csound doc: http://csound.com/docs/manual/linseg.html

linlin :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Linear to linear interpolation

Maps a linear range of values to another linear range of values.

kout  linlin  kin, ksrclo, ksrchi, kdstlo, kdsthi

csound doc: http://csound.com/docs/manual/linlin.html

gainslider :: Sig -> Sig

An implementation of a logarithmic gain curve which is similar to the gainslider~ object from Cycling 74 Max / MSP.

This opcode is intended for use to multiply by an audio signal to give a console mixer like feel. There is no bounds in the source code so you can for example give higher than 127 values for extra amplitude but possibly clipped audio.

kout  gainslider  kindex

csound doc: http://csound.com/docs/manual/gainslider.html

expsegr :: [D] -> D -> D -> Sig

Trace a series of exponential segments between specified points including a release segment.

ares  expsegr  ia, idur1, ib [, idur2] [, ic] [...], irel, iz
kres  expsegr  ia, idur1, ib [, idur2] [, ic] [...], irel, iz

csound doc: http://csound.com/docs/manual/expsegr.html

expsegba :: D -> D -> D -> Sig

An exponential segment generator operating at a-rate with absolute times.

An exponential segment generator operating at a-rate. This unit is almost identical to expsegb, but more precise when defining segments with very short durations (i.e., in a percussive attack phase) at audio rate.

ares  expsegba  ia, itim1, ib [, itim2] [, ic] [...]

csound doc: http://csound.com/docs/manual/expsegba.html

expsegb :: [D] -> Sig

Trace a series of exponential segments between specified absolute points.

ares  expsegb  ia, itim1, ib [, itim2] [, ic] [...]
kres  expsegb  ia, itim1, ib [, itim2] [, ic] [...]

csound doc: http://csound.com/docs/manual/expsegb.html

expsega :: [D] -> Sig

An exponential segment generator operating at a-rate.

An exponential segment generator operating at a-rate. This unit is almost identical to expseg, but more precise when defining segments with very short durations (i.e., in a percussive attack phase) at audio rate.

ares  expsega  ia, idur1, ib [, idur2] [, ic] [...]

csound doc: http://csound.com/docs/manual/expsega.html

expseg :: [D] -> Sig

Trace a series of exponential segments between specified points.

ares  expseg  ia, idur1, ib [, idur2] [, ic] [...]
kres  expseg  ia, idur1, ib [, idur2] [, ic] [...]

csound doc: http://csound.com/docs/manual/expseg.html

expon :: D -> D -> D -> Sig

Trace an exponential curve between specified points.

ares  expon  ia, idur, ib
kres  expon  ia, idur, ib

csound doc: http://csound.com/docs/manual/expon.html

expcurve :: Sig -> Sig -> Sig

This opcode implements a formula for generating a normalised exponential curve in range 0 - 1. It is based on the Max / MSP work of Eric Singer (c) 1994.

Generates an exponential curve in range 0 to 1 of arbitrary steepness. Steepness index equal to or lower than 1.0 will result in Not-a-Number errors and cause unstable behavior.

kout  expcurve  kindex, ksteepness

csound doc: http://csound.com/docs/manual/expcurve.html

cossegr :: [D] -> D -> D -> Sig

Trace a series of line segments between specified points with cosine interpolation, including a release segment.

ares  cossegr  ia, idur1, ib [, idur2] [, ic] [...], irel, iz
kres  cossegr  ia, idur1, ib [, idur2] [, ic] [...], irel, iz

csound doc: http://csound.com/docs/manual/cossegr.html

cossegb :: [D] -> Sig

Trace a series of line segments between specified absolute points with cosine interpolation.

ares  cossegb  ia, itim1, ib [, itim2] [, ic] [...]
kres  cossegb  ia, itim1, ib [, itim2] [, ic] [...]

csound doc: http://csound.com/docs/manual/cossegb.html

cosseg :: [D] -> Sig

Trace a series of line segments between specified points with cosine interpolation.

ares  cosseg  ia, idur1, ib [, idur2] [, ic] [...]
kres  cosseg  ia, idur1, ib [, idur2] [, ic] [...]

csound doc: http://csound.com/docs/manual/cosseg.html

bpf :: Sig -> Sig -> Sig -> [Sig] -> Sig

Break point function with linear interpolation

Break-point function with linear interpolation. Useful when defining a table with GEN27 and scaling the x value would be overkill.

ky  bpf  kx, kx1, ky1, kx2, ..., kxn, kyn

csound doc: http://csound.com/docs/manual/bpf.html

hvs3 :: Sig -> Sig -> Sig -> D -> D -> D -> D -> D -> D -> D -> SE ()

Allows three-dimensional Hyper Vectorial Synthesis (HVS) controlled by externally-updated k-variables.

hvs3 allows three-dimensional Hyper Vectorial Synthesis (HVS) controlled by externally-updated k-variables.

 hvs3  kx, ky, kz, inumParms, inumPointsX, inumPointsY, inumPointsZ, iOutTab, iPositionsTab, iSnapTab [, iConfigTab]

csound doc: http://csound.com/docs/manual/hvs3.html

hvs2 :: Sig -> Sig -> D -> D -> D -> D -> D -> D -> SE ()

Allows two-dimensional Hyper Vectorial Synthesis (HVS) controlled by externally-updated k-variables.

hvs2 allows two-dimensional Hyper Vectorial Synthesis (HVS) controlled by externally-updated k-variables.

 hvs2  kx, ky, inumParms, inumPointsX, inumPointsY, iOutTab, iPositionsTab, iSnapTab [, iConfigTab]

csound doc: http://csound.com/docs/manual/hvs2.html

hvs1 :: Sig -> D -> D -> D -> D -> D -> SE ()

Allows one-dimensional Hyper Vectorial Synthesis (HVS) controlled by externally-updated k-variables.

hvs1 allows one-dimensional Hyper Vectorial Synthesis (HVS) controlled by externally-updated k-variables.

 hvs1  kx, inumParms, inumPointsX, iOutTab, iPositionsTab, iSnapTab [, iConfigTab]

csound doc: http://csound.com/docs/manual/hvs1.html

vosim :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Sig

Simple vocal simulation based on glottal pulses with formant characteristics.

This opcode produces a simple vocal simulation based on glottal pulses with formant characteristics. Output is a series of sound events, where each event is composed of a burst of squared sine pulses followed by silence. The VOSIM (VOcal SIMulation) synthesis method was developed by Kaegi and Tempelaars in the 1970's.

ar  vosim  kamp, kFund, kForm, kDecay, kPulseCount, kPulseFactor, ifn [, iskip]

csound doc: http://csound.com/docs/manual/vosim.html

syncloop :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> D -> D -> D -> Sig

Synchronous granular synthesis.

syncloop is a variation on syncgrain, which implements synchronous granular synthesis. syncloop adds loop start and end points and an optional start position. Loop start and end control grain start positions, so the actual grains can go beyond the loop points (if the loop points are not at the extremes of the table), enabling seamless crossfading. For more information on the granular synthesis process, check the syncgrain manual page.

asig  syncloop  kamp, kfreq, kpitch, kgrsize, kprate, klstart, \
          klend, ifun1, ifun2, iolaps[,istart, iskip]

csound doc: http://csound.com/docs/manual/syncloop.html

partikkelsync :: Tuple a => D -> a

Outputs partikkel's grain scheduler clock pulse and phase to synchronize several instances of the partikkel opcode to the same clock source.

partikkelsync is an opcode for outputting partikkel's grain scheduler clock pulse and phase. partikkelsync's output can be used to synchronize other instances of the partikkel opcode to the same clock.

async [,aphase]  partikkelsync  iopcode_id

csound doc: http://csound.com/docs/manual/partikkelsync.html

partikkelset :: Sig -> Sig -> D -> SE ()

Set mask index for a specific mask parameter of a running partikkel instance.

partikkelset is an opcode for setting the partikkel mask index for a specific parameter. Used together with partikkelget, it can be used to synchronize partikkel masking between several running instances of the partikkel opcode. It can also be used to set the internal mask index basaed on other processes, for example to create more complex masking patterns than is available with the regular grain masking system.

 partikkelset  kparameterindex, kmaskindex, iopcode_id

csound doc: http://csound.com/docs/manual/partikkelset.html

partikkelget :: Sig -> D -> Sig

Get mask index for a specific mask parameter of a running partikkel instance.

partikkelget is an opcode for outputting partikkel mask index for a specific parameter. Used together with partikkelset, it can be used to synchronize partikkel masking between several running instances of the partikkel opcode. It can also be used to control other processes based on the internal mask index, for example to create more complex masking patterns than is available with the regular grain masking system.

kindex  partikkelget  kparameterindex, iopcode_id

csound doc: http://csound.com/docs/manual/partikkelget.html

grain3 :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> D -> Tab -> Tab -> Sig -> Sig -> Sig

Generate granular synthesis textures with more user control.

Generate granular synthesis textures. grain2 is simpler to use but grain3 offers more control.

ares  grain3  kcps, kphs, kfmd, kpmd, kgdur, kdens, imaxovr, kfn, iwfn, \
          kfrpow, kprpow [, iseed] [, imode]

csound doc: http://csound.com/docs/manual/grain3.html

grain2 :: Sig -> Sig -> Sig -> D -> Tab -> Tab -> Sig

Easy-to-use granular synthesis texture generator.

Generate granular synthesis textures. grain2 is simpler to use, but grain3 offers more control.

ares  grain2  kcps, kfmd, kgdur, iovrlp, kfn, iwfn [, irpow] \
          [, iseed] [, imode]

csound doc: http://csound.com/docs/manual/grain2.html

grain :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Tab -> D -> Sig

Generates granular synthesis textures.

ares  grain  xamp, xpitch, xdens, kampoff, kpitchoff, kgdur, igfn, \
          iwfn, imgdur [, igrnd]

csound doc: http://csound.com/docs/manual/grain.html

fog :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> D -> Tab -> Tab -> D -> Sig

Audio output is a succession of grains derived from data in a stored function table

Audio output is a succession of grains derived from data in a stored function table ifna. The local envelope of these grains and their timing is based on the model of fof synthesis and permits detailed control of the granular synthesis.

ares  fog  xamp, xdens, xtrans, aspd, koct, kband, kris, kdur, kdec, \
          iolaps, ifna, ifnb, itotdur [, iphs] [, itmode] [, iskip]

csound doc: http://csound.com/docs/manual/fog.html

fof :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> D -> Tab -> Tab -> D -> Sig

Produces sinusoid bursts useful for formant and granular synthesis.

Audio output is a succession of sinusoid bursts initiated at frequency xfund with a spectral peak at xform. For xfund above 25 Hz these bursts produce a speech-like formant with spectral characteristics determined by the k-input parameters. For lower fundamentals this generator provides a special form of granular synthesis.

ares  fof  xamp, xfund, xform, koct, kband, kris, kdur, kdec, iolaps, \
          ifna, ifnb, itotdur [, iphs] [, ifmode] [, iskip]

csound doc: http://csound.com/docs/manual/fof.html

diskgrain :: Str -> Sig -> Sig -> Sig -> Sig -> Sig -> D -> D -> Sig

Synchronous granular synthesis, using a soundfile as source.

diskgrain implements synchronous granular synthesis. The source sound for the grains is obtained by reading a soundfile containing the samples of the source waveform.

asig  diskgrain  Sfname, kamp, kfreq, kpitch, kgrsize, kprate, \
          ifun, iolaps [,imaxgrsize , ioffset]

csound doc: http://csound.com/docs/manual/diskgrain.html

foscili :: Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Sig

Basic frequency modulated oscillator with linear interpolation.

ares  foscili  xamp, kcps, xcar, xmod, kndx, ifn [, iphs]

csound doc: http://csound.com/docs/manual/foscili.html

foscil :: Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Sig

A basic frequency modulated oscillator.

ares  foscil  xamp, kcps, xcar, xmod, kndx, ifn [, iphs]

csound doc: http://csound.com/docs/manual/foscil.html

fmwurlie :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Tab -> Tab -> Tab -> Tab -> Sig

Uses FM synthesis to create a Wurlitzer electric piano sound.

Uses FM synthesis to create a Wurlitzer electric piano sound. It comes from a family of FM sounds, all using 4 basic oscillators and various architectures, as used in the TX81Z synthesizer.

ares  fmwurlie  kamp, kfreq, kc1, kc2, kvdepth, kvrate, ifn1, ifn2, ifn3, \
          ifn4, ivfn

csound doc: http://csound.com/docs/manual/fmwurlie.html

fmvoice :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

FM Singing Voice Synthesis

ares  fmvoice  kamp, kfreq, kvowel, ktilt, kvibamt, kvibrate[, ifn1, \
          ifn2, ifn3, ifn4, ivibfn]

csound doc: http://csound.com/docs/manual/fmvoice.html

fmrhode :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Tab -> Tab -> Tab -> Tab -> Sig

Uses FM synthesis to create a Fender Rhodes electric piano sound.

Uses FM synthesis to create a Fender Rhodes electric piano sound. It comes from a family of FM sounds, all using 4 basic oscillators and various architectures, as used in the TX81Z synthesizer.

ares  fmrhode  kamp, kfreq, kc1, kc2, kvdepth, kvrate, ifn1, ifn2, \
          ifn3, ifn4, ivfn

csound doc: http://csound.com/docs/manual/fmrhode.html

fmpercfl :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Uses FM synthesis to create a percussive flute sound.

Uses FM synthesis to create a percussive flute sound. It comes from a family of FM sounds, all using 4 basic oscillators and various architectures, as used in the TX81Z synthesizer.

ares  fmpercfl  kamp, kfreq, kc1, kc2, kvdepth, kvrate[, ifn1, ifn2, \
          ifn3, ifn4, ivfn]

csound doc: http://csound.com/docs/manual/fmpercfl.html

fmmetal :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Tab -> Tab -> Tab -> Tab -> Sig

Uses FM synthesis to create a “Heavy Metal” sound.

Uses FM synthesis to create a “Heavy Metal” sound. It comes from a family of FM sounds, all using 4 basic oscillators and various architectures, as used in the TX81Z synthesizer.

ares  fmmetal  kamp, kfreq, kc1, kc2, kvdepth, kvrate, ifn1, ifn2, ifn3, \
          ifn4, ivfn

csound doc: http://csound.com/docs/manual/fmmetal.html

fmbell :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Uses FM synthesis to create a tublar bell sound.

Uses FM synthesis to create a tublar bell sound. It comes from a family of FM sounds, all using 4 basic oscillators and various architectures, as used in the TX81Z synthesizer.

ares  fmbell  kamp, kfreq, kc1, kc2, kvdepth, kvrate[, ifn1, ifn2, ifn3, \
          ifn4, ivfn, isus]

csound doc: http://csound.com/docs/manual/fmbell.html

fmb3 :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Uses FM synthesis to create a Hammond B3 organ sound.

Uses FM synthesis to create a Hammond B3 organ sound. It comes from a family of FM sounds, all using 4 basic oscillators and various architectures, as used in the TX81Z synthesizer.

ares  fmb3  kamp, kfreq, kc1, kc2, kvdepth, kvrate[, ifn1, ifn2, ifn3, \
          ifn4, ivfn]

csound doc: http://csound.com/docs/manual/fmb3.html

crossfmpmi :: Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Tab -> (Sig, Sig)

Two mutually frequency and/or phase modulated oscillators.

Two oscillators, mutually frequency and/or phase modulated by each other.

a1, a2  crossfmpmi  xfrq1, xfrq2, xndx1, xndx2, kcps, ifn1, ifn2 [, iphs1] [, iphs2]

csound doc: http://csound.com/docs/manual/crossfm.html

crossfmpm :: Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Tab -> (Sig, Sig)

Two mutually frequency and/or phase modulated oscillators.

Two oscillators, mutually frequency and/or phase modulated by each other.

a1, a2  crossfmpm  xfrq1, xfrq2, xndx1, xndx2, kcps, ifn1, ifn2 [, iphs1] [, iphs2]

csound doc: http://csound.com/docs/manual/crossfm.html

crosspmi :: Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Tab -> (Sig, Sig)

Two mutually frequency and/or phase modulated oscillators.

Two oscillators, mutually frequency and/or phase modulated by each other.

a1, a2  crosspmi  xfrq1, xfrq2, xndx1, xndx2, kcps, ifn1, ifn2 [, iphs1] [, iphs2]

csound doc: http://csound.com/docs/manual/crossfm.html

crosspm :: Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Tab -> (Sig, Sig)

Two mutually frequency and/or phase modulated oscillators.

Two oscillators, mutually frequency and/or phase modulated by each other.

a1, a2  crosspm  xfrq1, xfrq2, xndx1, xndx2, kcps, ifn1, ifn2 [, iphs1] [, iphs2]

csound doc: http://csound.com/docs/manual/crossfm.html

crossfmi :: Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Tab -> (Sig, Sig)

Two mutually frequency and/or phase modulated oscillators.

Two oscillators, mutually frequency and/or phase modulated by each other.

a1, a2  crossfmi  xfrq1, xfrq2, xndx1, xndx2, kcps, ifn1, ifn2 [, iphs1] [, iphs2]

csound doc: http://csound.com/docs/manual/crossfm.html

crossfm :: Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Tab -> (Sig, Sig)

Two mutually frequency and/or phase modulated oscillators.

Two oscillators, mutually frequency and/or phase modulated by each other.

a1, a2  crossfm  xfrq1, xfrq2, xndx1, xndx2, kcps, ifn1, ifn2 [, iphs1] [, iphs2]

csound doc: http://csound.com/docs/manual/crossfm.html

vco2init :: D -> SE Tab

Calculates tables for use by vco2 opcode.

vco2init calculates tables for use by vco2 opcode. Optionally, it is also possible to access these tables as standard Csound function tables. In this case, vco2ft can be used to find the correct table number for a given oscillator frequency.

ifn  vco2init  iwave [, ibasfn] [, ipmul] [, iminsiz] [, imaxsiz] [, isrcft]

csound doc: http://csound.com/docs/manual/vco2init.html

vco2ift :: D -> D -> Tab

Returns a table number at i-time for a given oscillator frequency and wavform.

vco2ift is the same as vco2ft, but works at i-time. It is suitable for use with opcodes that expect an i-rate table number (for example, oscili).

ifn  vco2ift  icps, iwave [, inyx]

csound doc: http://csound.com/docs/manual/vco2ift.html

vco2ft :: Sig -> D -> Tab

Returns a table number at k-time for a given oscillator frequency and wavform.

vco2ft returns the function table number to be used for generating the specified waveform at a given frequency. This function table number can be used by any Csound opcode that generates a signal by reading function tables (like oscilikt). The tables must be calculated by vco2init before vco2ft is called and shared as Csound ftables (ibasfn).

kfn  vco2ft  kcps, iwave [, inyx]

csound doc: http://csound.com/docs/manual/vco2ft.html

vco2 :: Sig -> Sig -> Sig

Implementation of a band-limited oscillator using pre-calculated tables.

vco2 is similar to vco. But the implementation uses pre-calculated tables of band-limited waveforms (see also GEN30) rather than integrating impulses. This opcode can be faster than vco (especially if a low control-rate is used) and also allows better sound quality. Additionally, there are more waveforms and oscillator phase can be modulated at k-rate. The disadvantage is increased memory usage. For more details about vco2 tables, see also vco2init and vco2ft.

ares  vco2  kamp, kcps [, imode] [, kpw] [, kphs] [, inyx]

csound doc: http://csound.com/docs/manual/vco2.html

vco :: Sig -> Sig -> D -> Sig -> Sig

Implementation of a band limited, analog modeled oscillator.

Implementation of a band limited, analog modeled oscillator, based on integration of band limited impulses. vco can be used to simulate a variety of analog wave forms.

ares  vco  xamp, xcps, iwave, kpw [, ifn] [, imaxd] [, ileak] [, inyx] \
          [, iphs] [, iskip]

csound doc: http://csound.com/docs/manual/vco.html

squinewave :: Tuple a => Sig -> Sig -> Sig -> a

A mostly bandlimited shape-shifting square-pulse-saw-sinewave oscillator with hardsync.

This oscillator generates a variable shape waveform that can morph freely between classical shapes sine, square, pulse and saw. The shape is controlled by two interacting values: clip (squareness) and "skew" (symmetry). All shapes use a minimum number of samples per transition (ie, the sharp end of a saw or a pulse uses minimum N samples), this makes output bandlimited. At higher frequency, the minimum sweep rate takes over, so over a certain pitch all shapes "degrade" to sinewave. The minimum sweep rate is i-time configurable. Hardsync (a very quick sweep to phase=0) is supported, and a sync signal is output once per cycle.

aout [, asyncout]  squinewave  acps, aClip, aSkew [, asyncin] [, iMinSweep] [, iphase]

csound doc: http://csound.com/docs/manual/squinewave.html

mpulse :: Sig -> Sig -> Sig

Generates a set of impulses.

Generates a set of impulses of amplitude kamp separated by kintvl seconds (or samples if kintvl is negative). The first impulse is generated after a delay of ioffset seconds.

ares  mpulse  kamp, kintvl [, ioffset]

csound doc: http://csound.com/docs/manual/mpulse.html

gbuzz :: Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Sig

Output is a set of harmonically related cosine partials.

ares  gbuzz  xamp, xcps, knh, klh, kmul, ifn [, iphs]

csound doc: http://csound.com/docs/manual/gbuzz.html

buzz :: Sig -> Sig -> Sig -> Tab -> Sig

Output is a set of harmonically related sine partials.

ares  buzz  xamp, xcps, knh, ifn [, iphs]

csound doc: http://csound.com/docs/manual/buzz.html

vibrato :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Sig

Generates a natural-sounding user-controllable vibrato.

kout  vibrato  kAverageAmp, kAverageFreq, kRandAmountAmp, kRandAmountFreq, kAmpMinRate, kAmpMaxRate, kcpsMinRate, kcpsMaxRate, ifn [, iphs

csound doc: http://csound.com/docs/manual/vibrato.html

vibr :: Sig -> Sig -> Tab -> Sig

Easier-to-use user-controllable vibrato.

kout  vibr  kAverageAmp, kAverageFreq, ifn

csound doc: http://csound.com/docs/manual/vibr.html

poscil3 :: Sig -> Sig -> Tab -> Sig

High precision oscillator with cubic interpolation.

ares  poscil3  aamp, acps [, ifn, iphs]
ares  poscil3  aamp, kcps [, ifn, iphs]
ares  poscil3  kamp, acps [, ifn, iphs]
ares  poscil3  kamp, kcps [, ifn, iphs]
ires  poscil3  kamp, kcps [, ifn, iphs]
kres  poscil3  kamp, kcps [, ifn, iphs]

csound doc: http://csound.com/docs/manual/poscil3.html

poscil :: Sig -> Sig -> Tab -> Sig

High precision oscillator.

ares  poscil  aamp, acps [, ifn, iphs]
ares  poscil  aamp, kcps [, ifn, iphs]
ares  poscil  kamp, acps [, ifn, iphs]
ares  poscil  kamp, kcps [, ifn, iphs]
ires  poscil  kamp, kcps [, ifn, iphs]
kres  poscil  kamp, kcps [, ifn, iphs]

csound doc: http://csound.com/docs/manual/poscil.html

oscils :: D -> D -> D -> Sig

A simple, fast sine oscillator

Simple, fast sine oscillator, that uses only one multiply, and two add operations to generate one sample of output, and does not require a function table.

ares  oscils  iamp, icps, iphs [, iflg]

csound doc: http://csound.com/docs/manual/oscils.html

osciln :: Sig -> D -> Tab -> D -> Sig

Accesses table values at a user-defined frequency.

Accesses table values at a user-defined frequency. This opcode can also be written as oscilx.

ares  osciln  kamp, ifrq, ifn, itimes

csound doc: http://csound.com/docs/manual/osciln.html

oscilikts :: Sig -> Sig -> Tab -> Sig -> Sig -> Sig

A linearly interpolated oscillator with sync status that allows changing the table number at k-rate.

oscilikts is the same as oscilikt. Except it has a sync input that can be used to re-initialize the oscillator to a k-rate phase value. It is slower than oscilikt and osciliktp.

ares  oscilikts  xamp, xcps, kfn, async, kphs [, istor]

csound doc: http://csound.com/docs/manual/oscilikts.html

osciliktp :: Sig -> Tab -> Sig -> Sig

A linearly interpolated oscillator that allows allows phase modulation.

osciliktp allows phase modulation (which is actually implemented as k-rate frequency modulation, by differentiating phase input). The disadvantage is that there is no amplitude control, and frequency can be varied only at the control-rate. This opcode can be faster or slower than oscilikt, depending on the control-rate.

ares  osciliktp  kcps, kfn, kphs [, istor]

csound doc: http://csound.com/docs/manual/osciliktp.html

oscilikt :: Sig -> Sig -> Tab -> Sig

A linearly interpolated oscillator that allows changing the table number at k-rate.

oscilikt is very similar to oscili, but allows changing the table number at k-rate. It is slightly slower than oscili (especially with high control rate), although also more accurate as it uses a 31-bit phase accumulator, as opposed to the 24-bit one used by oscili.

ares  oscilikt  xamp, xcps, kfn [, iphs] [, istor]
kres  oscilikt  kamp, kcps, kfn [, iphs] [, istor]

csound doc: http://csound.com/docs/manual/oscilikt.html

oscili :: Sig -> Sig -> Tab -> Sig

A simple oscillator with linear interpolation.

oscili reads table ifn sequentially and repeatedly at a frequency xcps. The amplitude is scaled by xamp. Linear interpolation is applied for table look up from internal phase values.

ares  oscili  xamp, xcps[, ifn, iphs]
kres  oscili  kamp, kcps[, ifn, iphs]

csound doc: http://csound.com/docs/manual/oscili.html

oscil3 :: Sig -> Sig -> Tab -> Sig

A simple oscillator with cubic interpolation.

oscil3 reads table ifn sequentially and repeatedly at a frequency xcps. The amplitude is scaled by xamp. Cubic interpolation is applied for table look up from internal phase values.

ares  oscil3  xamp, xcps [, ifn, iphs]
kres  oscil3  kamp, kcps [, ifn, iphs]

csound doc: http://csound.com/docs/manual/oscil3.html

oscil :: Sig -> Sig -> Tab -> Sig

A simple oscillator.

oscil reads table ifn sequentially and repeatedly at a frequency xcps. The amplitude is scaled by xamp.

ares  oscil  xamp, xcps [, ifn, iphs]
kres  oscil  kamp, kcps [, ifn, iphs]

csound doc: http://csound.com/docs/manual/oscil.html

oscbnk :: Sig -> Sig -> Sig -> Sig -> D -> D -> Sig -> Sig -> Sig -> Sig -> D -> Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> D -> Tab -> Sig

Mixes the output of any number of oscillators.

This unit generator mixes the output of any number of oscillators. The frequency, phase, and amplitude of each oscillator can be modulated by two LFOs (all oscillators have a separate set of LFOs, with different phase and frequency); additionally, the output of each oscillator can be filtered through an optional parametric equalizer (also controlled by the LFOs). This opcode is most useful for rendering ensemble (strings, choir, etc.) instruments.

ares  oscbnk   kcps, kamd, kfmd, kpmd, iovrlap, iseed, kl1minf, kl1maxf, \
          kl2minf, kl2maxf, ilfomode, keqminf, keqmaxf, keqminl, keqmaxl, \
          keqminq, keqmaxq, ieqmode, kfn [, il1fn] [, il2fn] [, ieqffn]   \
          [, ieqlfn] [, ieqqfn] [, itabl] [, ioutfn]

csound doc: http://csound.com/docs/manual/oscbnk.html

hsboscil :: Sig -> Sig -> Sig -> D -> Tab -> Tab -> Sig

An oscillator which takes tonality and brightness as arguments.

An oscillator which takes tonality and brightness as arguments, relative to a base frequency.

ares  hsboscil  kamp, ktone, kbrite, ibasfreq, iwfn, ioctfn \
                   [, ioctcnt] [, iphs]

csound doc: http://csound.com/docs/manual/hsboscil.html

adsynt2 :: Sig -> Sig -> Tab -> Tab -> Tab -> D -> Sig

Performs additive synthesis with an arbitrary number of partials -not necessarily harmonic- with interpolation.

Performs additive synthesis with an arbitrary number of partials, not necessarily harmonic. (see adsynt for detailed manual)

ar  adsynt2  kamp, kcps, iwfn, ifreqfn, iampfn, icnt [, iphs]

csound doc: http://csound.com/docs/manual/adsynt2.html

adsynt :: Sig -> Sig -> Tab -> Tab -> Tab -> D -> Sig

Performs additive synthesis with an arbitrary number of partials, not necessarily harmonic.

ares  adsynt  kamp, kcps, iwfn, ifreqfn, iampfn, icnt [, iphs]

csound doc: http://csound.com/docs/manual/adsynt.html

adsyn :: Sig -> Sig -> Sig -> Str -> Sig

Output is an additive set of individually controlled sinusoids, using an oscillator bank.

ares  adsyn  kamod, kfmod, ksmod, ifilcod

csound doc: http://csound.com/docs/manual/adsyn.html

outletv :: Str -> Sig -> SE ()

Sends an arate array signal out from an instrument to a named port.

 outletv Sname, array

csound doc: http://csound.com/docs/manual/outletv.html

outletkid :: Str -> Str -> Sig -> SE ()

Sends a krate signal out from an instrument to a named port.

 outletkid Sname, SinstanceID, ksignal

csound doc: http://csound.com/docs/manual/outletkid.html

outletk :: Str -> Sig -> SE ()

Sends a krate signal out from an instrument to a named port.

 outletk Sname, ksignal

csound doc: http://csound.com/docs/manual/outletk.html

outletf :: Str -> Spec -> SE ()

Sends a frate signal (fsig) out from an instrument to a named port.

 outletf Sname, fsignal

csound doc: http://csound.com/docs/manual/outletf.html

outleta :: Str -> Sig -> SE ()

Sends an arate signal out from an instrument to a named port.

 outleta Sname, asignal

csound doc: http://csound.com/docs/manual/outleta.html

inletv :: Str -> Sig

Receives an arate array signal into an instrument through a named port.

array  inletv Sname

csound doc: http://csound.com/docs/manual/inletv.html

inletkid :: Str -> Str -> Sig

Receives a krate signal into an instrument from a named port.

ksignal  inletkid Sname, SinstanceID

csound doc: http://csound.com/docs/manual/inletkid.html

inletk :: Str -> Sig

Receives a krate signal into an instrument from a named port.

ksignal  inletk Sname

csound doc: http://csound.com/docs/manual/inletk.html

inletf :: Str -> Spec

Receives an frate signal (fsig) into an instrument from a named port.

fsignal  inletf Sname

csound doc: http://csound.com/docs/manual/inletf.html

inleta :: Str -> Sig

Receives an arate signal into an instrument through a named port.

asignal  inleta Sname

csound doc: http://csound.com/docs/manual/inleta.html

ftgenonce :: D -> D -> D -> D -> D -> [D] -> SE Tab

Generate a function table from within an instrument definition, without duplication of data.

Enables the creation of function tables entirely inside instrument definitions, without any duplication of data.

ifno  ftgenonce  ip1, ip2dummy, isize, igen, iarga, iargb, ...

csound doc: http://csound.com/docs/manual/ftgenonce.html

serialWrite_i :: D -> D -> SE ()

Write data to a serial port.

Write data to a serial port for arduino.

  serialWrite_i  iPort, iByte
  serialWrite_i  iPort, SBytes

csound doc: http://csound.com/docs/manual/serialWrite_i.html

serialWrite :: D -> D -> SE ()

Write data to a serial port.

Write data to a serial port for arduino.

  serialWrite  iPort, iByte
  serialWrite  iPort, kByte
  serialWrite  iPort, SBytes

csound doc: http://csound.com/docs/manual/serialWrite.html

serialRead :: D -> Sig

Read data from a serial port.

Read data from a serial port for arduino.

kByte  serialRead  iPort

csound doc: http://csound.com/docs/manual/serialRead.html

serialPrint :: D -> SE ()

Print data from a serial port.

Print to the screen any bytes (up to 32k) in the input buffer. Note that these bytes will be cleared from the buffer. use this opcode mainly for debugging messages. If you want to mix debugging and other communication messages over the same port, you will need to manually parse the data with the serialRead opcode.

  serialPrint  iPort

csound doc: http://csound.com/docs/manual/serialPrint.html

serialFlush :: D -> SE ()

Flush data from a serial port.

Flush to the screen any bytes (up to 32k) in the input buffer. Note that these bytes will be cleared from the buffer. use this opcode mainly for debugging messages. If you want to mix debugging and other communication messages over the same port, you will need to manually parse the data with the serialRead opcode.

  serialFlush  iPort

csound doc: http://csound.com/docs/manual/serialFlush.html

serialEnd :: D -> SE ()

Close a serial port.

Close a serial port for arduino.

  serialEnd  iPort

csound doc: http://csound.com/docs/manual/serialEnd.html

serialBegin :: Str -> SE D

Open a serial port.

Open a serial port for arduino.

iPort  serialBegin  SPortName [, ibaudRate]

csound doc: http://csound.com/docs/manual/serialBegin.html

midremot :: D -> D -> D -> SE ()

An opcode which can be used to implement a remote midi orchestra. This opcode will send midi events from a source machine to one destination.

With the midremot and midglobal opcodes you are able to perform instruments on remote machines and control them from a master machine. The remote opcodes are implemented using the master/client model. All the machines involved contain the same orchestra but only the master machine contains the information of the midi score. During the performance the master machine sends the midi events to the clients. The midremot opcode will send events from a source machine to one destination if you want to send events to many destinations (broadcast) use the midglobal opcode instead. These two opcodes can be used in combination.

 midremot  idestination, isource, instrnum [,instrnum...] 

csound doc: http://csound.com/docs/manual/midremot.html

midglobal :: D -> D -> SE ()

An opcode which can be used to implement a remote midi orchestra. This opcode will broadcast the midi events to all the machines involved in the remote concert.

With the midremot and midglobal opcodes you are able to perform instruments on remote machines and control them from a master machine. The remote opcodes are implemented using the master/client model. All the machines involved contain the same orchestra but only the master machine contains the information of the midi score. During the performance the master machine sends the midi events to the clients. The midglobal opcode sends the events to all the machines involved in the remote concert. These machines are determined by the midremot definitions made above the midglobal command. To send events to only one machine use midremot.

 midglobal  isource, instrnum [,instrnum...] 

csound doc: http://csound.com/docs/manual/midglobal.html

insremot :: D -> D -> D -> SE ()

An opcode which can be used to implement a remote orchestra. This opcode will send note events from a source machine to one destination.

With the insremot and insglobal opcodes you are able to perform instruments on remote machines and control them from a master machine. The remote opcodes are implemented using the master/client model. All the machines involved contain the same orchestra but only the master machine contains the information of the score. During the performance the master machine sends the note events to the clients. The insremot opcode will send events from a source machine to one destination if you want to send events to many destinations (broadcast) use the insglobal opcode instead. These two opcodes can be used in combination.

 insremot  idestination, isource, instrnum [,instrnum...] 

csound doc: http://csound.com/docs/manual/insremot.html

insglobal :: D -> D -> SE ()

An opcode which can be used to implement a remote orchestra. This opcode will send note events from a source machine to many destinations.

With the insremot and insglobal opcodes you are able to perform instruments on remote machines and control them from a master machine. The remote opcodes are implemented using the master/client model. All the machines involved contain the same orchestra but only the master machine contains the information of the score. During the performance the master machine sends the note events to the clients. The insglobal opcode sends the events to all the machines involved in the remote concert. These machines are determined by the insremot definitions made above the insglobal command. To send events to only one machine use insremot.

 insglobal  isource, instrnum [,instrnum...] 

csound doc: http://csound.com/docs/manual/insglobal.html

mrtmsg :: D -> SE ()

Send system real-time messages to the MIDI OUT port.

 mrtmsg  imsgtype

csound doc: http://csound.com/docs/manual/mrtmsg.html

mclock :: D -> SE ()

Sends a MIDI CLOCK message.

 mclock  ifreq

csound doc: http://csound.com/docs/manual/mclock.html

midiprogramchange :: Sig -> SE ()

Gets a MIDI program change value.

midiprogramchange is designed to simplify writing instruments that can be used interchangeably for either score or MIDI input, and to make it easier to adapt instruments originally written for score input to work with MIDI input.

 midiprogramchange  xprogram

csound doc: http://csound.com/docs/manual/midiprogramchange.html

midipolyaftertouch :: Sig -> Sig -> SE ()

Gets a MIDI polyphonic aftertouch value.

midipolyaftertouch is designed to simplify writing instruments that can be used interchangeably for either score or MIDI input, and to make it easier to adapt instruments originally written for score input to work with MIDI input.

 midipolyaftertouch  xpolyaftertouch, xcontrollervalue [, ilow] [, ihigh]

csound doc: http://csound.com/docs/manual/midipolyaftertouch.html

midipitchbend :: Sig -> SE ()

Gets a MIDI pitchbend value.

midipitchbend is designed to simplify writing instruments that can be used interchangeably for either score or MIDI input, and to make it easier to adapt instruments originally written for score input to work with MIDI input.

 midipitchbend  xpitchbend [, ilow] [, ihigh]

csound doc: http://csound.com/docs/manual/midipitchbend.html

midinoteonpch :: Sig -> Sig -> SE ()

Gets a MIDI note number as a pitch-class value.

midinoteonpch is designed to simplify writing instruments that can be used interchangeably for either score or MIDI input, and to make it easier to adapt instruments originally written for score input to work with MIDI input.

 midinoteonpch  xpch, xvelocity

csound doc: http://csound.com/docs/manual/midinoteonpch.html

midinoteonoct :: Sig -> Sig -> SE ()

Gets a MIDI note number value as octave-point-decimal value.

midinoteonoct is designed to simplify writing instruments that can be used interchangeably for either score or MIDI input, and to make it easier to adapt instruments originally written for score input to work with MIDI input.

 midinoteonoct  xoct, xvelocity

csound doc: http://csound.com/docs/manual/midinoteonoct.html

midinoteonkey :: Sig -> Sig -> SE ()

Gets a MIDI note number value.

midinoteonkey is designed to simplify writing instruments that can be used interchangeably for either score or MIDI input, and to make it easier to adapt instruments originally written for score input to work with MIDI input.

 midinoteonkey  xkey, xvelocity

csound doc: http://csound.com/docs/manual/midinoteonkey.html

midinoteoncps :: Sig -> Sig -> SE ()

Gets a MIDI note number as a cycles-per-second frequency.

midinoteoncps is designed to simplify writing instruments that can be used interchangeably for either score or MIDI input, and to make it easier to adapt instruments originally written for score input to work with MIDI input.

 midinoteoncps  xcps, xvelocity

csound doc: http://csound.com/docs/manual/midinoteoncps.html

midinoteoff :: Sig -> Sig -> SE ()

Gets a MIDI noteoff value.

midinoteoff is designed to simplify writing instruments that can be used interchangeably for either score or MIDI input, and to make it easier to adapt instruments originally written for score input to work with MIDI input.

 midinoteoff  xkey, xvelocity

csound doc: http://csound.com/docs/manual/midinoteoff.html

mididefault :: Sig -> Sig -> SE ()

Changes values, depending on MIDI activation.

mididefault is designed to simplify writing instruments that can be used interchangeably for either score or MIDI input, and to make it easier to adapt instruments originally written for score input to work with MIDI input.

 mididefault  xdefault, xvalue

csound doc: http://csound.com/docs/manual/mididefault.html

midicontrolchange :: Sig -> Sig -> SE ()

Gets a MIDI control change value.

midicontrolchange is designed to simplify writing instruments that can be used interchangeably for either score or MIDI input, and to make it easier to adapt instruments originally written for score input to work with MIDI input.

 midicontrolchange  xcontroller, xcontrollervalue [, ilow] [, ihigh]

csound doc: http://csound.com/docs/manual/midicontrolchange.html

midichn :: D

Returns the MIDI channel number from which the note was activated.

midichn returns the MIDI channel number (1 - 16) from which the note was activated. In the case of score notes, it returns 0.

ichn  midichn 

csound doc: http://csound.com/docs/manual/midichn.html

midichannelaftertouch :: Sig -> SE ()

Gets a MIDI channel's aftertouch value.

midichannelaftertouch is designed to simplify writing instruments that can be used interchangeably for either score or MIDI input, and to make it easier to adapt instruments originally written for score input to work with MIDI input.

 midichannelaftertouch  xchannelaftertouch [, ilow] [, ihigh]

csound doc: http://csound.com/docs/manual/midichannelaftertouch.html

noteondur2 :: D -> D -> D -> D -> SE ()

Sends a noteon and a noteoff MIDI message both with the same channel, number and velocity.

 noteondur2  ichn, inum, ivel, idur

csound doc: http://csound.com/docs/manual/noteondur2.html

noteondur :: D -> D -> D -> D -> SE ()

Sends a noteon and a noteoff MIDI message both with the same channel, number and velocity.

 noteondur  ichn, inum, ivel, idur

csound doc: http://csound.com/docs/manual/noteondur.html

noteon :: D -> D -> D -> SE ()

Send a noteon message to the MIDI OUT port.

 noteon  ichn, inum, ivel

csound doc: http://csound.com/docs/manual/noteon.html

noteoff :: D -> D -> D -> SE ()

Send a noteoff message to the MIDI OUT port.

 noteoff  ichn, inum, ivel

csound doc: http://csound.com/docs/manual/noteoff.html

moscil :: Sig -> Sig -> Sig -> Sig -> Sig -> SE ()

Sends a stream of the MIDI notes.

 moscil  kchn, knum, kvel, kdur, kpause

csound doc: http://csound.com/docs/manual/moscil.html

midion2 :: Sig -> Sig -> Sig -> Sig -> SE ()

Sends noteon and noteoff messages to the MIDI OUT port.

Sends noteon and noteoff messages to the MIDI OUT port when triggered by a value different than zero.

 midion2  kchn, knum, kvel, ktrig

csound doc: http://csound.com/docs/manual/midion2.html

midion :: Sig -> Sig -> Sig -> SE ()

Generates MIDI note messages at k-rate.

 midion  kchn, knum, kvel

csound doc: http://csound.com/docs/manual/midion.html

xtratim :: D -> SE ()

Extend the duration of real-time generated events.

Extend the duration of real-time generated events and handle their extra life (Usually for usage along with release instead of linenr, linsegr, etc).

 xtratim  iextradur

csound doc: http://csound.com/docs/manual/xtratim.html

release :: Sig

Indicates whether a note is in its “release” stage.

Provides a way of knowing when a note off message for the current note is received. Only a noteoff message with the same MIDI note number as the one which triggered the note will be reported by release.

kflag  release 

csound doc: http://csound.com/docs/manual/release.html

midiout_i :: D -> D -> D -> D -> SE ()

Sends a generic MIDI message to the MIDI OUT port.

 midiout_i  istatus, ichan, idata1, idata2

csound doc: http://csound.com/docs/manual/midiout_i.html

midiout :: Sig -> Sig -> Sig -> Sig -> SE ()

Sends a generic MIDI message to the MIDI OUT port.

 midiout  kstatus, kchan, kdata1, kdata2

csound doc: http://csound.com/docs/manual/midiout.html

midiin :: (Sig, Sig, Sig, Sig)

Returns a generic MIDI message received by the MIDI IN port.

Returns a generic MIDI message received by the MIDI IN port

kstatus, kchan, kdata1, kdata2  midiin 

csound doc: http://csound.com/docs/manual/midiin.html

pchmidib :: Msg -> Sig

Get the note number of the current MIDI event and modify it by the current pitch-bend value, express it in pitch-class units.

ipch  pchmidib  [irange]
kpch  pchmidib  [irange]

csound doc: http://csound.com/docs/manual/pchmidib.html

pchmidi :: Msg -> D

Get the note number of the current MIDI event, expressed in pitch-class units.

ipch  pchmidi 

csound doc: http://csound.com/docs/manual/pchmidi.html

octmidib :: Msg -> Sig

Get the note number of the current MIDI event and modify it by the current pitch-bend value, express it in octave-point-decimal.

ioct  octmidib  [irange]
koct  octmidib  [irange]

csound doc: http://csound.com/docs/manual/octmidib.html

octmidi :: Msg -> D

Get the note number, in octave-point-decimal units, of the current MIDI event.

ioct  octmidi 

csound doc: http://csound.com/docs/manual/octmidi.html

cpstmid :: Msg -> Tab -> D

Get a MIDI note number (allows customized micro-tuning scales).

This unit is similar to cpsmidi, but allows fully customized micro-tuning scales.

icps  cpstmid  ifn

csound doc: http://csound.com/docs/manual/cpstmid.html

cpsmidib :: Msg -> Sig

Get the note number of the current MIDI event and modify it by the current pitch-bend value, express it in cycles-per-second.

icps  cpsmidib  [irange]
kcps  cpsmidib  [irange]

csound doc: http://csound.com/docs/manual/cpsmidib.html

cpsmidi :: Msg -> D

Get the note number of the current MIDI event, expressed in cycles-per-second.

icps  cpsmidi 

csound doc: http://csound.com/docs/manual/cpsmidi.html

ampmidid :: D -> D -> Sig

Musically map MIDI velocity to peak amplitude within a specified dynamic range in decibels.

iamplitude  ampmidid  ivelocity, idecibels
kamplitude  ampmidid  kvelocity, idecibels

csound doc: http://csound.com/docs/manual/ampmidid.html

ampmidi :: Msg -> D -> D

Get the velocity of the current MIDI event.

iamp  ampmidi  iscal [, ifn]

csound doc: http://csound.com/docs/manual/ampmidi.html

outkpc :: Sig -> Sig -> Sig -> Sig -> SE ()

Sends MIDI program change messages at k-rate.

 outkpc  kchn, kprog, kmin, kmax

csound doc: http://csound.com/docs/manual/outkpc.html

outkpb :: Sig -> Sig -> Sig -> Sig -> SE ()

Sends MIDI pitch-bend messages at k-rate.

 outkpb  kchn, kvalue, kmin, kmax

csound doc: http://csound.com/docs/manual/outkpb.html

outkpat :: Sig -> Sig -> Sig -> Sig -> Sig -> SE ()

Sends polyphonic MIDI aftertouch messages at k-rate.

 outkpat  kchn, knotenum, kvalue, kmin, kmax

csound doc: http://csound.com/docs/manual/outkpat.html

outkc14 :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> SE ()

Sends 14-bit MIDI controller output at k-rate.

 outkc14  kchn, kmsb, klsb, kvalue, kmin, kmax

csound doc: http://csound.com/docs/manual/outkc14.html

outkc :: Sig -> Sig -> Sig -> Sig -> Sig -> SE ()

Sends MIDI controller messages at k-rate.

 outkc  kchn, knum, kvalue, kmin, kmax

csound doc: http://csound.com/docs/manual/outkc.html

outkat :: Sig -> Sig -> Sig -> Sig -> SE ()

Sends MIDI aftertouch messages at k-rate.

 outkat  kchn, kvalue, kmin, kmax

csound doc: http://csound.com/docs/manual/outkat.html

outipc :: D -> D -> D -> D -> SE ()

Sends MIDI program change messages at i-rate

 outipc  ichn, iprog, imin, imax

csound doc: http://csound.com/docs/manual/outipc.html

outipb :: D -> D -> D -> D -> SE ()

Sends MIDI pitch-bend messages at i-rate.

 outipb  ichn, ivalue, imin, imax

csound doc: http://csound.com/docs/manual/outipb.html

outipat :: D -> D -> D -> D -> D -> SE ()

Sends polyphonic MIDI aftertouch messages at i-rate.

 outipat  ichn, inotenum, ivalue, imin, imax

csound doc: http://csound.com/docs/manual/outipat.html

outic14 :: D -> D -> D -> D -> D -> D -> SE ()

Sends 14-bit MIDI controller output at i-rate.

 outic14  ichn, imsb, ilsb, ivalue, imin, imax

csound doc: http://csound.com/docs/manual/outic14.html

outic :: D -> D -> D -> D -> D -> SE ()

Sends MIDI controller output at i-rate.

 outic  ichn, inum, ivalue, imin, imax

csound doc: http://csound.com/docs/manual/outic.html

outiat :: D -> D -> D -> D -> SE ()

Sends MIDI aftertouch messages at i-rate.

 outiat  ichn, ivalue, imin, imax

csound doc: http://csound.com/docs/manual/outiat.html

nrpn :: Sig -> Sig -> Sig -> SE ()

Sends a Non-Registered Parameter Number to the MIDI OUT port.

Sends a NPRN (Non-Registered Parameter Number) message to the MIDI OUT port each time one of the input arguments changes.

 nrpn  kchan, kparmnum, kparmvalue

csound doc: http://csound.com/docs/manual/nrpn.html

veloc :: Msg -> D

Get the velocity from a MIDI event.

ival  veloc  [ilow] [, ihigh]

csound doc: http://csound.com/docs/manual/veloc.html

polyaft :: D -> Sig

Returns the polyphonic after-touch pressure of the selected note number.

polyaft returns the polyphonic pressure of the selected note number, optionally mapped to an user-specified range.

ires  polyaft  inote [, ilow] [, ihigh]
kres  polyaft  inote [, ilow] [, ihigh]

csound doc: http://csound.com/docs/manual/polyaft.html

pgmassign :: D -> D -> SE ()

Assigns an instrument number to a specified MIDI program.

Assigns an instrument number to a specified (or all) MIDI program(s).

 pgmassign  ipgm, inst[, ichn]
 pgmassign  ipgm, "insname"[, ichn]

csound doc: http://csound.com/docs/manual/pgmassign.html

pchbend :: Msg -> Sig

Get the current pitch-bend value for this channel.

ibend  pchbend  [imin] [, imax]
kbend  pchbend  [imin] [, imax]

csound doc: http://csound.com/docs/manual/pchbend.html

notnum :: Msg -> D

Get a note number from a MIDI event.

ival  notnum 

csound doc: http://csound.com/docs/manual/notnum.html

midictrl :: D -> Sig

Get the current value (0-127) of a specified MIDI controller.

ival  midictrl  inum [, imin] [, imax]
kval  midictrl  inum [, imin] [, imax]

csound doc: http://csound.com/docs/manual/midictrl.html

midic7 :: D -> D -> D -> Sig

Allows a floating-point 7-bit MIDI signal scaled with a minimum and a maximum range.

idest  midic7  ictlno, imin, imax [, ifn]
kdest  midic7  ictlno, kmin, kmax [, ifn]

csound doc: http://csound.com/docs/manual/midic7.html

midic21 :: D -> D -> D -> D -> D -> Sig

Allows a floating-point 21-bit MIDI signal scaled with a minimum and a maximum range.

idest  midic21  ictlno1, ictlno2, ictlno3, imin, imax [, ifn]
kdest  midic21  ictlno1, ictlno2, ictlno3, kmin, kmax [, ifn]

csound doc: http://csound.com/docs/manual/midic21.html

midic14 :: D -> D -> D -> D -> Sig

Allows a floating-point 14-bit MIDI signal scaled with a minimum and a maximum range.

idest  midic14  ictlno1, ictlno2, imin, imax [, ifn]
kdest  midic14  ictlno1, ictlno2, kmin, kmax [, ifn]

csound doc: http://csound.com/docs/manual/midic14.html

massign :: D -> D -> SE ()

Assigns a MIDI channel number to a Csound instrument.

 massign  ichnl, insnum[, ireset]
 massign  ichnl, "insname"[, ireset]

csound doc: http://csound.com/docs/manual/massign.html

initc21 :: D -> D -> D -> D -> D -> SE ()

Initializes the controllers used to create a 21-bit MIDI value.

 initc21  ichan, ictlno1, ictlno2, ictlno3, ivalue

csound doc: http://csound.com/docs/manual/initc21.html

initc14 :: D -> D -> D -> D -> SE ()

Initializes the controllers used to create a 14-bit MIDI value.

 initc14  ichan, ictlno1, ictlno2, ivalue

csound doc: http://csound.com/docs/manual/initc14.html

ctrlinit :: [D] -> SE ()

Sets the initial values for a set of MIDI controllers.

 ctrlinit  ichnl, ictlno1, ival1 [, ictlno2] [, ival2] [, ictlno3] \
          [, ival3] [,...ival32]

csound doc: http://csound.com/docs/manual/ctrlinit.html

ctrl21 :: D -> D -> D -> D -> D -> D -> Sig

Allows a floating-point 21-bit MIDI signal scaled with a minimum and a maximum range.

idest  ctrl21  ichan, ictlno1, ictlno2, ictlno3, imin, imax [, ifn]
kdest  ctrl21  ichan, ictlno1, ictlno2, ictlno3, kmin, kmax [, ifn]

csound doc: http://csound.com/docs/manual/ctrl21.html

ctrl14 :: D -> D -> D -> D -> D -> Sig

Allows a floating-point 14-bit MIDI signal scaled with a minimum and a maximum range.

idest  ctrl14  ichan, ictlno1, ictlno2, imin, imax [, ifn]
kdest  ctrl14  ichan, ictlno1, ictlno2, kmin, kmax [, ifn]

csound doc: http://csound.com/docs/manual/ctrl14.html

chanctrl :: D -> D -> Sig

Get the current value of a MIDI channel controller.

Get the current value of a controller and optionally map it onto specified range.

ival  chanctrl  ichnl, ictlno [, ilow] [, ihigh]
kval  chanctrl  ichnl, ictlno [, ilow] [, ihigh]

csound doc: http://csound.com/docs/manual/chanctrl.html

aftouch :: Sig

Get the current after-touch value for this channel.

kaft  aftouch  [imin] [, imax]

csound doc: http://csound.com/docs/manual/aftouch.html

vstprogset :: D -> Sig -> SE ()

Loads parameter banks to a VST plugin.

vstprogset sets one of the programs in an .fxb bank.

 vstprogset  instance, kprogram

csound doc: http://csound.com/docs/manual/vstprogset.html

vstparamget :: D -> Sig -> Sig

Used for parameter comunication to and from a VST plugin.

vstparamset and vstparamget are used for parameter comunication to and from a VST plugin.

kvalue  vstparamget instance, kparam

csound doc: http://csound.com/docs/manual/vstparamset.html

vstparamset :: D -> Sig -> Sig -> SE ()

Used for parameter comunication to and from a VST plugin.

vstparamset and vstparamget are used for parameter comunication to and from a VST plugin.

 vstparamset instance, kparam, kvalue

csound doc: http://csound.com/docs/manual/vstparamset.html

vstnote :: D -> Sig -> Sig -> Sig -> Sig -> SE ()

Sends a MIDI note with definite duration to a VST plugin.

vstnote sends a MIDI note with definite duration to a VST plugin.

 vstnote  instance, kchan, knote, kveloc, kdur
        

csound doc: http://csound.com/docs/manual/vstnote.html

vstmidiout :: D -> Sig -> Sig -> Sig -> Sig -> SE ()

Sends MIDI information to a VST plugin.

vstmidiout is used for sending MIDI information to a VST plugin.

 vstmidiout  instance, kstatus, kchan, kdata1, kdata2

csound doc: http://csound.com/docs/manual/vstmidiout.html

vstinit :: D -> SE D

Load a VST plugin into memory for use with the other vst4cs opcodes.

vstinit is used to load a VST plugin into memory for use with the other vst4cs opcodes. Both VST effects and instruments (synthesizers) can be used.

instance  vstinit  ilibrarypath [,iverbose]

csound doc: http://csound.com/docs/manual/vstinit.html

vstinfo :: D -> SE ()

Displays the parameters and the programs of a VST plugin.

vstinfo displays the parameters and the programs of a VST plugin.

 vstinfo  instance

csound doc: http://csound.com/docs/manual/vstinfo.html

vstedit :: D -> SE ()

Opens the GUI editor window for a VST plugin.

vstedit opens the custom GUI editor window for a VST plugin. Note that not all VST plugins have custom GUI editors. It may be necessary to use the --displays command-line option to ensure that Csound handles events from the editor window and displays it properly.

 vstedit  instance

csound doc: http://csound.com/docs/manual/vstedit.html

vstbankload :: D -> D -> SE ()

Loads parameter banks to a VST plugin.

vstbankload is used for loading parameter banks to a VST plugin.

 vstbankload  instance, ipath

csound doc: http://csound.com/docs/manual/vstbankload.html

vstaudiog :: D -> (Sig, Sig)

VST audio output.

vstaudio and vstaudiog are used for sending and receiving audio from a VST plugin.

aout1,aout2  vstaudiog  instance, [ain1, ain2]

csound doc: http://csound.com/docs/manual/vstaudio.html

vstaudio :: D -> (Sig, Sig)

VST audio output.

vstaudio and vstaudiog are used for sending and receiving audio from a VST plugin.

aout1,aout2  vstaudio  instance, [ain1, ain2]

csound doc: http://csound.com/docs/manual/vstaudio.html

dssilist :: SE ()

Lists all available DSSI and LADSPA plugins.

dssilist checks the variables DSSI_PATH and LADSPA_PATH and lists all plugins available in all plugin libraries there.

 dssilist 

csound doc: http://csound.com/docs/manual/dssilist.html

dssiinit :: D -> D -> SE D

Loads a DSSI or LADSPA plugin.

dssiinit is used to load a DSSI or LADSPA plugin into memory for use with the other dssi4cs opcodes. Both LADSPA effects and DSSI instruments can be used.

ihandle  dssiinit  ilibraryname, iplugindex [, iverbose] 

csound doc: http://csound.com/docs/manual/dssiinit.html

dssictls :: D -> D -> Sig -> Sig -> SE ()

Send control information to a LADSPA or DSSI plugin.

dssictls sends control values to a plugin's control port

 dssictls  ihandle, iport, kvalue, ktrigger 

csound doc: http://csound.com/docs/manual/dssictls.html

dssiaudio :: Tuple a => D -> [Sig] -> a

Processes audio using a LADSPA or DSSI plugin.

dssiaudio generates audio by processing an input signal through a LADSPA plugin.

[aout1, aout2, ..., aout9]  dssiaudio  ihandle, [ain1, ain2, ..., ain9]

csound doc: http://csound.com/docs/manual/dssiaudio.html

dssiactivate :: D -> Sig -> SE ()

Activates or deactivates a DSSI or LADSPA plugin.

dssiactivate is used to activate or deactivate a DSSI or LADSPA plugin. It calles the plugin's activate() and deactivate() functions if they are provided.

 dssiactivate  ihandle, ktoggle 

csound doc: http://csound.com/docs/manual/dssiactivate.html

cpsxpch :: D -> D -> D -> D -> D

Converts a pitch-class value into cycles-per-second (Hz) for equal divisions of any interval.

Converts a pitch-class value into cycles-per-second (Hz) for equal divisions of any interval. There is a restriction of no more than 100 equal divisions.

icps  cpsxpch  ipch, iequal, irepeat, ibase

csound doc: http://csound.com/docs/manual/cpsxpch.html

cpstuni :: D -> Tab -> D

Returns micro-tuning values at init-rate.

icps  cpstuni  index, ifn

csound doc: http://csound.com/docs/manual/cpstuni.html

cpstun :: Sig -> Sig -> Tab -> Sig

Returns micro-tuning values at k-rate.

kcps  cpstun  ktrig, kindex, kfn

csound doc: http://csound.com/docs/manual/cpstun.html

cps2pch :: D -> D -> D

Converts a pitch-class value into cycles-per-second (Hz) for equal divisions of the octave.

icps  cps2pch  ipch, iequal

csound doc: http://csound.com/docs/manual/cps2pch.html

semitone :: SigOrD a => a -> a

Calculates a factor to raise/lower a frequency by a given amount of semitones.

 semitone (x)

csound doc: http://csound.com/docs/manual/semitone.html

pchtom :: D -> Sig

Convert pch to midi note number

Convert pch to midi note number. pch representation has the form Octave.pitchclass, pitchclass being a number between 00 and 12.

imidi  pchtom  ipch
kmidi  pchtom  kpch

csound doc: http://csound.com/docs/manual/pchtom.html

pchoct :: SigOrD a => a -> a

Converts an octave-point-decimal value to pitch-class.

 pchoct  (oct)  (init- or control-rate args only)

csound doc: http://csound.com/docs/manual/pchoct.html

pchmidinn :: SigOrD a => a -> a

Converts a Midi note number value to octave point pitch-class units.

 pchmidinn  (MidiNoteNumber)  (init- or control-rate args only)

csound doc: http://csound.com/docs/manual/pchmidinn.html

octpch :: SigOrD a => a -> a

Converts a pitch-class value to octave-point-decimal.

 octpch  (pch)  (init- or control-rate args only)

csound doc: http://csound.com/docs/manual/octpch.html

octmidinn :: SigOrD a => a -> a

Converts a Midi note number value to octave-point-decimal.

 octmidinn  (MidiNoteNumber)  (init- or control-rate args only)

csound doc: http://csound.com/docs/manual/octmidinn.html

octcps :: SigOrD a => a -> a

Converts a cycles-per-second value to octave-point-decimal.

 octcps  (cps)  (init- or control-rate args only)

csound doc: http://csound.com/docs/manual/octcps.html

octave :: SigOrD a => a -> a

Calculates a factor to raise/lower a frequency by a given amount of octaves.

 octave (x)

csound doc: http://csound.com/docs/manual/octave.html

ntom :: Str -> D

Convert note name to midi note number

Convert note name to midi note number. It allows note name to include microtones or a deviation in cents.

kmidi  ntom  Snote
imidi  ntom  Snote

csound doc: http://csound.com/docs/manual/ntom.html

mton :: Sig -> Str

Convert midi note number to string note name

Convert midi note number to string note name, with an accuracy of 1 cent.

Snote  mton  kmidi
Snote  mton  imidi

csound doc: http://csound.com/docs/manual/mton.html

mtof :: D -> Sig

Convert a midi to frequency

Convert a midi note number value to cycles per second, taking global value of A4 into account.

ifreq  mtof  imidi
kfreq  mtof  kmidi

csound doc: http://csound.com/docs/manual/mtof.html

ftom :: D -> Sig

Convert frequency to midi

Convert frequency to midi note number, taking global value of A4 into account.

imidi  ftom  ifreq
kmidi  ftom  kfreq

csound doc: http://csound.com/docs/manual/ftom.html

cpspch :: SigOrD a => a -> a

Converts a pitch-class value to cycles-per-second.

 cpspch  (pch)  (init- or control-rate args only)

csound doc: http://csound.com/docs/manual/cpspch.html

cpsoct :: SigOrD a => a -> a

Converts an octave-point-decimal value to cycles-per-second.

 cpsoct  (oct)  (no rate restriction)

csound doc: http://csound.com/docs/manual/cpsoct.html

cpsmidinn :: SigOrD a => a -> a

Converts a Midi note number value to cycles-per-second.

 cpsmidinn  (MidiNoteNumber)  (init- or control-rate args only)

csound doc: http://csound.com/docs/manual/cpsmidinn.html

cent :: SigOrD a => a -> a

Calculates a factor to raise/lower a frequency by a given amount of cents.

 cent (x) 

csound doc: http://csound.com/docs/manual/cent.html

oscRaw :: Tuple a => D -> a

Listen for all OSC messages at a given port.

On each k-cycle looks to see if an OSC message has been received at a given port and copies its contents to a string array. All messages are copied. If a bundle of messages is received, the output array will contain all of the messages in it.

Smess[],klen  OSCraw  iport

csound doc: http://csound.com/docs/manual/OSCraw.html

stsend :: Sig -> Str -> D -> SE ()

Sends data to other processes using the low-level UDP or TCP protocols

Transmits data directly using the UDP (socksend and socksends) or TCP (stsend) protocol onto a network. The data is not subject to any encoding or special routing. The socksends opcode send a stereo signal interleaved.

 stsend  asig, Sipaddr, iport

csound doc: http://csound.com/docs/manual/socksend.html

socksends :: Sig -> Sig -> Str -> D -> D -> SE ()

Sends data to other processes using the low-level UDP or TCP protocols

Transmits data directly using the UDP (socksend and socksends) or TCP (stsend) protocol onto a network. The data is not subject to any encoding or special routing. The socksends opcode send a stereo signal interleaved.

 socksends  asigl, asigr, Sipaddr, iport,
        ilength

csound doc: http://csound.com/docs/manual/socksend.html

socksend :: Sig -> Str -> D -> D -> SE ()

Sends data to other processes using the low-level UDP or TCP protocols

Transmits data directly using the UDP (socksend and socksends) or TCP (stsend) protocol onto a network. The data is not subject to any encoding or special routing. The socksends opcode send a stereo signal interleaved.

 socksend  asig, Sipaddr, iport, ilength
 socksend  ksig, Sipaddr, iport, ilength

csound doc: http://csound.com/docs/manual/socksend.html

strecv :: Str -> D -> Sig

Receives data from other processes using the low-level UDP or TCP protocols

Receives directly using the UDP (sockrecv and sockrecvs) or TCP (strecv) protocol onto a network. The data is not subject to any encoding or special routing. The sockrecvs opcode receives a stereo signal interleaved.

asig  strecv  Sipaddr, iport

csound doc: http://csound.com/docs/manual/sockrecv.html

sockrecvs :: D -> D -> (Sig, Sig)

Receives data from other processes using the low-level UDP or TCP protocols

Receives directly using the UDP (sockrecv and sockrecvs) or TCP (strecv) protocol onto a network. The data is not subject to any encoding or special routing. The sockrecvs opcode receives a stereo signal interleaved.

asigl, asigr  sockrecvs  iport, ilength

csound doc: http://csound.com/docs/manual/sockrecv.html

sockrecv :: D -> D -> Sig

Receives data from other processes using the low-level UDP or TCP protocols

Receives directly using the UDP (sockrecv and sockrecvs) or TCP (strecv) protocol onto a network. The data is not subject to any encoding or special routing. The sockrecvs opcode receives a stereo signal interleaved.

asig  sockrecv  iport, ilength
ksig  sockrecv  iport, ilength

csound doc: http://csound.com/docs/manual/sockrecv.html

remoteport :: D -> SE ()

Defines the port for use with the remote system.

Defines the port for use with the insremot, midremot, insglobal and midglobal opcodes.

 remoteport  iportnum

csound doc: http://csound.com/docs/manual/remoteport.html

mixerSetLevel_i :: D -> D -> D -> SE ()

Sets the level of a send to a buss.

Sets the level at which signals from the send are added to the buss. This opcode, because all parameters are irate, may be used in the orchestra header. The actual sending of the signal to the buss is performed by the MixerSend opcode.

 MixerSetLevel_i  isend, ibuss, igain

csound doc: http://csound.com/docs/manual/MixerSetLevel_i.html

mixerSetLevel :: D -> D -> Sig -> SE ()

Sets the level of a send to a buss.

Sets the level at which signals from the send are added to the buss. The actual sending of the signal to the buss is performed by the MixerSend opcode.

 MixerSetLevel  isend, ibuss, kgain

csound doc: http://csound.com/docs/manual/MixerSetLevel.html

mixerSend :: Sig -> D -> D -> D -> SE ()

Mixes an arate signal into a channel of a buss.

 MixerSend  asignal, isend, ibuss, ichannel

csound doc: http://csound.com/docs/manual/MixerSend.html

mixerReceive :: D -> D -> SE Sig

Receives an arate signal from a channel of a buss.

Receives an arate signal that has been mixed onto a channel of a buss.

asignal  MixerReceive  ibuss, ichannel

csound doc: http://csound.com/docs/manual/MixerReceive.html

mixerGetLevel :: D -> D -> SE Sig

Gets the level of a send to a buss.

Gets the level at which signals from the send are being added to the buss. The actual sending of the signal to the buss is performed by the MixerSend opcode.

kgain  MixerGetLevel  isend, ibuss

csound doc: http://csound.com/docs/manual/MixerGetLevel.html

mixerClear :: SE ()

Resets all channels of a buss to 0.

 MixerClear 

csound doc: http://csound.com/docs/manual/MixerClear.html

tableshufflei :: D -> SE ()

shuffles the content of a function table so that each element of the source table is put into a different random position.

This opcode can be used in order to shuffle the content of function tables into a random order but without loosing any of the elements. Imagine shuffling a deck of cards. Each element of the table is copied to a different random position. If that position was already chosen before then the next free position is chosen. The length of the table remains the same.

 tableshufflei  itablenum

csound doc: http://csound.com/docs/manual/tableshuffle.html

tableshuffle :: Sig -> SE ()

shuffles the content of a function table so that each element of the source table is put into a different random position.

This opcode can be used in order to shuffle the content of function tables into a random order but without loosing any of the elements. Imagine shuffling a deck of cards. Each element of the table is copied to a different random position. If that position was already chosen before then the next free position is chosen. The length of the table remains the same.

 tableshuffle  ktablenum

csound doc: http://csound.com/docs/manual/tableshuffle.html

system :: Sig -> Str -> Sig

Call an external program via the system call

system and system_i call any external command understood by the operating system, similarly to the C function system(). system_i runs at i-time only, while system runs both at initialization and performance time.

kres  system  ktrig, Scmd, [knowait]

csound doc: http://csound.com/docs/manual/system.html

system_i :: D -> Str -> D

Call an external program via the system call

system and system_i call any external command understood by the operating system, similarly to the C function system(). system_i runs at i-time only, while system runs both at initialization and performance time.

ires  system_i  itrig, Scmd, [inowait]

csound doc: http://csound.com/docs/manual/system.html

select :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig

Select sample value based on audio-rate comparisons.

Select sample value from three based on audio-rate comparisons of two signals.

aout  select  a1, a2, aless, aequal, amore

csound doc: http://csound.com/docs/manual/select.html

pwd :: Str

Asks the underlying operating system for the current directory name as a string.

pwd call the operating system to determine the current directory (folder). pwd runs at i-time only.

Sres  pwd 

csound doc: http://csound.com/docs/manual/pwd.html

modmatrix :: Tab -> Tab -> Tab -> D -> D -> D -> Sig -> SE ()

Modulation matrix opcode with optimizations for sparse matrices.

The opcode can be used to let a large number of k-rate modulator variables modulate a large number of k-rate parameter variables, with arbitrary scaling of each modulator-to-parameter connection. Csound ftables are used to hold both the input (parameter) variables, the modulator variables, and the scaling coefficients. Output variables are written to another Csound ftable.

 modmatrix  iresfn, isrcmodfn, isrcparmfn, imodscale, inum_mod, \\
    inum_parm, kupdate

csound doc: http://csound.com/docs/manual/modmatrix.html

fareyleni :: Tab -> D

returns the length of a Farey Sequence.

This opcode can be used in conjunction with GENfarey. It calculates the length of Farey Sequence Fn. Its length is given by: |Fn| = 1 + SUM over n phi(m) where phi(m) is Euler's totient function, which gives the number of integers ≤ m that are coprime to m.

ifl  fareyleni  ifn

csound doc: http://csound.com/docs/manual/fareyleni.html

fareylen :: Tab -> Sig

returns the length of a Farey Sequence.

This opcode can be used in conjunction with GENfarey. It calculates the length of Farey Sequence Fn. Its length is given by: |Fn| = 1 + SUM over n phi(m) where phi(m) is Euler's totient function, which gives the number of integers ≤ m that are coprime to m.

kfl  fareylen  kfn

csound doc: http://csound.com/docs/manual/fareylen.html

directory :: Str -> Str

Reads a directory and outputs to a string array a list of file names.

Reads a directory for files and passes them to a string array. Users can set the file type by passing a file extension as a string.

SFiles[]  directory  SDirectory[, SExtention]

csound doc: http://csound.com/docs/manual/directory.html

taninv2 :: SigOrD a => a -> a -> a

Returns an arctangent.

Returns the arctangent of iyix, kykx, or ay/ax.

ares  taninv2  ay, ax
ires  taninv2  iy, ix
kres  taninv2  ky, kx
... taninv2 (ky, kx)... (no rate restriction)

csound doc: http://csound.com/docs/manual/taninv2.html

sum' :: [Sig] -> Sig

Sums any number of a-rate signals, or array elements.

ares  sum  asig1 [, asig2] [, asig3] [...]
kres  sum  karr
ires  sum  iarr

csound doc: http://csound.com/docs/manual/sum.html

product' :: [Sig] -> Sig

Multiplies any number of a-rate signals.

ares  product  asig1, asig2 [, asig3] [...]

csound doc: http://csound.com/docs/manual/product.html

pow :: Sig -> Sig -> Sig

Computes one argument to the power of another argument.

Computes xarg to the power of kpow (or ipow) and scales the result by inorm.

ares  pow  aarg, kpow [, inorm]
ires  pow  iarg, ipow [, inorm]
kres  pow  karg, kpow [,
        inorm]
ires[]  pow  iarg[], ipow[] 
kres[]  pow  karg[], kpow[]
ires[]  pow  iarg[], ipow 
kres[]  pow  karg[], kpow 

csound doc: http://csound.com/docs/manual/pow.html

polynomial :: Sig -> [Sig] -> Sig

Efficiently evaluates a polynomial of arbitrary order.

The polynomial opcode calculates a polynomial with a single a-rate input variable. The polynomial is a sum of any number of terms in the form kn*x^n where kn is the nth coefficient of the expression. These coefficients are k-rate values.

aout  polynomial  ain, k0 [, k1 [, k2 [...]]]

csound doc: http://csound.com/docs/manual/polynomial.html

maca :: [Sig] -> Sig

Multiply and accumulate a-rate signals only.

ares  maca  asig1 , asig2 [, asig3] [, asig4] [, asig5] [...]

csound doc: http://csound.com/docs/manual/maca.html

mac :: [Sig] -> Sig

Multiplies and accumulates a- and k-rate signals.

ares  mac  ksig1, asig1 [, ksig2] [, asig2] [, ksig3] [, asig3] [...]

csound doc: http://csound.com/docs/manual/mac.html

divz :: SigOrD a => a -> a -> a

Safely divides two numbers.

ares  divz  xa, xb, ksubst
ires  divz  ia, ib, isubst
kres  divz  ka, kb, ksubst
... divz (ka, kb, ksubst)... (no rate restriction)

csound doc: http://csound.com/docs/manual/divz.html

rnd :: SigOrD a => a -> SE a

Returns a random number in a unipolar range at the rate given by the input argument.

 rnd (x) (init- or control-rate only)

csound doc: http://csound.com/docs/manual/rnd.html

birnd :: SigOrD a => a -> SE a

Returns a random number in a bi-polar range.

 birnd (x) (init- or control-rate only)

csound doc: http://csound.com/docs/manual/birnd.html

dbfsamp :: SigOrD a => a -> a

Returns the decibel equivalent of the raw amplitude x, relative to full scale amplitude.

Returns the decibel equivalent of the raw amplitude x, relative to full scale amplitude. Full scale is assumed to be 16 bit. New is Csound version 4.10.

 dbfsamp (x)  (init-rate or control-rate args only)

csound doc: http://csound.com/docs/manual/dbfsamp.html

dbamp :: SigOrD a => a -> a

Returns the decibel equivalent of the raw amplitude x.

 dbamp (x)  (init-rate or control-rate args only)

csound doc: http://csound.com/docs/manual/dbamp.html

ampdbfs :: SigOrD a => a -> a

Returns the amplitude equivalent (in 16-bit signed integer scale) of the full scale decibel (dB FS) value x.

Returns the amplitude equivalent of the full scale decibel (dB FS) value x. The logarithmic full scale decibel values will be converted to linear 16-bit signed integer values from −32,768 to +32,767.

 ampdbfs (x)  (no rate restriction)

csound doc: http://csound.com/docs/manual/ampdbfs.html

ampdb :: SigOrD a => a -> a

Returns the amplitude equivalent of the decibel value x.

Returns the amplitude equivalent of the decibel value x. Thus:

 ampdb (x)  (no rate restriction)

csound doc: http://csound.com/docs/manual/ampdb.html

vincr :: Sig -> Sig -> SE ()

Accumulates audio signals.

vincr increments one audio variable with another signal, i.e. it accumulates output.

 vincr  accum, aincr

csound doc: http://csound.com/docs/manual/vincr.html

clear :: [Sig] -> SE ()

Zeroes a list of audio signals.

clear zeroes a list of audio signals.

 clear  avar1 [, avar2] [, avar3] [...]

csound doc: http://csound.com/docs/manual/clear.html

jackoTransport :: Sig -> SE ()

Control the Jack transport.

Starts, stops, or repositions the Jack transport. This is useful, e.g., for starting an external sequencer playing to send MIDI messages to Csound.

 JackoTransport  kcommand, [kposition]

csound doc: http://csound.com/docs/manual/JackoTransport.html

jackoOn :: SE ()

Enables or disables all Jack ports.

In the orchestra header, after all Jack connections have been created, enables or disables all Jack input and output opcodes inside this instance of Csound to read or write data.

 JackoOn [iactive] 

csound doc: http://csound.com/docs/manual/JackoOn.html

jackoNoteOut :: Str -> Sig -> Sig -> Sig -> SE ()

Sends a MIDI channel message to a Jack port.

Sends a MIDI channel message to a Jack MIDI output port inside this instance of Csound, and in turn to its connected external Jack MIDI input port.

 JackoNoteOut  ScsoundPortName, kstatus, kchannel, kdata1[, kdata2]

csound doc: http://csound.com/docs/manual/JackoNoteOut.html

jackoMidiOutConnect :: Str -> Str -> SE ()

Creates a MIDI connection from Csound to a Jack port.

In the orchestra header, creates a connection from a Jack MIDI output port inside this instance of Csound to an external Jack MIDI input port.

 JackoMidiOutConnect ScsoundPortName, SexternalPortName

csound doc: http://csound.com/docs/manual/JackoMidiOutConnect.html

jackoMidiOut :: Str -> Sig -> Sig -> Sig -> SE ()

Sends a MIDI channel message to a Jack port.

Sends a MIDI channel message to a Jack MIDI output port inside this instance of Csound, and in turn to its connected external Jack MIDI input port.

 JackoMidiOut  ScsoundPortName, kstatus, kchannel, kdata1[, kdata2]

csound doc: http://csound.com/docs/manual/JackoMidiOut.html

jackoMidiInConnect :: Str -> Str -> SE ()

Creates a MIDI connection from a Jack port to Csound.

In the orchestra header, creates a MIDI connection from an external Jack MIDI output port to this instance of Csound.

 JackoMidiInConnect SexternalPortName, ScsoundPortName

csound doc: http://csound.com/docs/manual/JackoMidiInConnect.html

jackoInit :: Str -> Str -> SE ()

Initializes Csound as a Jack client.

Initializes this instance of Csound as a Jack client.

 JackoInit ServerName, SclientName

csound doc: http://csound.com/docs/manual/JackoInit.html

jackoAudioOutConnect :: Str -> Str -> SE ()

Creates an audio connection from Csound to a Jack port.

In the orchestra header, creates an audio connection from a Jack audio output port inside this instance of Csound to an external Jack audio input port.

 JackoAudioOutConnect ScsoundPortName, SexternalPortName

csound doc: http://csound.com/docs/manual/JackoAudioOutConnect.html

jackoAudioOut :: Str -> Sig -> SE ()

Sends an audio signal to a Jack port.

Sends an audio signal to an internal Jack audio output port, and in turn to its connected external Jack audio input port.

 JackoAudioOut  ScsoundPortName, asignal

csound doc: http://csound.com/docs/manual/JackoAudioOut.html

jackoAudioInConnect :: Str -> Str -> SE ()

Creates an audio connection from a Jack port to Csound.

In the orchestra header, creates an audio connection from an external Jack audio output port to a Jack audio input port inside this instance of Csound.

 JackoAudioInConnect SexternalPortName, ScsoundPortName

csound doc: http://csound.com/docs/manual/JackoAudioInConnect.html

jackoAudioIn :: Str -> SE Sig

Receives an audio signal from a Jack port.

Receives an audio signal from a Jack audio input port inside this instance of Csound, which in turn has received the signal from its connected external Jack audio output port.

asignal  JackoAudioIn ScsoundPortName

csound doc: http://csound.com/docs/manual/JackoAudioIn.html

times :: SE Sig

Read absolute time in seconds.

Read absolute time, in seconds, since the start of the performance.

ires  times 
kres  times 

csound doc: http://csound.com/docs/manual/times.html

timek :: SE Sig

Read absolute time in k-rate cycles.

Read absolute time, in k-rate cycles, since the start of the performance.

ires  timek 
kres  timek 

csound doc: http://csound.com/docs/manual/timek.html

timeinsts :: Sig

Read absolute time in seconds.

Read absolute time, in seconds, since the start of an instance of an instrument.

kres  timeinsts 

csound doc: http://csound.com/docs/manual/timeinsts.html

timeinstk :: Sig

Read absolute time in k-rate cycles.

Read absolute time, in k-rate cycles, since the start of an instance of an instrument. Called at both i-time as well as k-time.

kres  timeinstk 

csound doc: http://csound.com/docs/manual/timeinstk.html

rtclock :: Sig

Read the real time clock from the operating system.

Read the real-time clock from the operating system.

ires  rtclock 
kres  rtclock 

csound doc: http://csound.com/docs/manual/rtclock.html

readclock :: D -> D

Reads the value of an internal clock.

ir  readclock  inum

csound doc: http://csound.com/docs/manual/readclock.html

dates :: Str

Returns as a string the date and time specified.

Sir  dates  [ itime]

csound doc: http://csound.com/docs/manual/dates.html

date :: Tuple a => a

Returns the number seconds since a base date.

Returns the number seconds since a base date, using the operating system's clock. The base is 1 January 1970 for Csound using doubles, and 1 January 2010 for versions using floats. On operating systemms with sufficient resolution the date includes fractional seconds.

ir[, inano]  date 
kr[, knano]  date 

csound doc: http://csound.com/docs/manual/date.html

subinstrinit :: D -> [D] -> SE ()

Creates and runs a numbered instrument instance at init-time.

Same as subinstr, but init-time only and has no output arguments.

 subinstrinit  instrnum [, p4] [, p5] [...]
 subinstrinit  "insname" [, p4] [, p5] [...]

csound doc: http://csound.com/docs/manual/subinstrinit.html

subinstr :: Tuple a => D -> [D] -> a

Creates and runs a numbered instrument instance.

Creates an instance of another instrument and is used as if it were an opcode.

a1, [...] [, a8]  subinstr  instrnum [, p4] [, p5] [...]
a1, [...] [, a8]  subinstr  "insname" [, p4] [, p5] [...]

csound doc: http://csound.com/docs/manual/subinstr.html

stack :: D -> SE ()

Initializes the stack. Deprecated.

Initializes and sets the size of the global stack.

 stack   iStackSize

csound doc: http://csound.com/docs/manual/stack.html

push_f :: Spec -> SE ()

Pushes an f-sig frame into the global stack. Deprecated.

Pushes an f-sig frame into the global stack.

 push_f   fsig

csound doc: http://csound.com/docs/manual/push_f.html

push :: [Sig] -> SE ()

Pushes a value into the global stack. Deprecated.

Pushes a value into the global stack.

 push   xval1, [xval2, ... , xval31]
 push   ival1, [ival2, ... , ival31]

csound doc: http://csound.com/docs/manual/push.html

pop_f :: Spec

Pops an f-sig frame from the global stack. Deprecated.

Pops an f-sig frame from the global stack.

fsig  pop_f 

csound doc: http://csound.com/docs/manual/pop_f.html

pop :: Tuple a => a

Pops values from the global stack. Deprecated.

Pops values from the global stack.

xval1, [xval2, ... , xval31]  pop 
ival1, [ival2, ... , ival31]  pop 

csound doc: http://csound.com/docs/manual/pop.html

xyin :: D -> D -> D -> D -> D -> (Sig, Sig)

Sense the cursor position in an output window

Sense the cursor position in an output window. When xyin is called the position of the mouse within the output window is used to reply to the request. This simple mechanism does mean that only one xyin can be used accurately at once. The position of the mouse is reported in the output window.

kx, ky  xyin  iprd, ixmin, ixmax, iymin, iymax [, ixinit] [, iyinit]

csound doc: http://csound.com/docs/manual/xyin.html

writescratch :: D -> SE ()

writes a value into the scratchpad of the instance of an instrument.

The writescratch opcode writes one of four scalar values to be stored in the instance of an instrument.

 writescratch ival[, index]

csound doc: http://csound.com/docs/manual/writescratch.html

wiisend :: Sig -> Sig -> Sig

Sends data to one of a number of external Nintendo Wiimote controllers.

kres  wiisend  kcontrol, kvalue[, knum]

csound doc: http://csound.com/docs/manual/wiisend.html

wiirange :: D -> D -> D -> SE ()

Sets scaling and range limits for certain Wiimote fields.

  wiirange  icontrol, iminimum, imaximum[, inum]

csound doc: http://csound.com/docs/manual/wiirange.html

wiidata :: Sig -> Sig

Reads data fields from a number of external Nintendo Wiimote controllers.

Reads data fields from upto four external Nintendo Wiimote controllers.

kres  wiidata  kcontrol[, knum]

csound doc: http://csound.com/docs/manual/wiidata.html

wiiconnect :: D

Reads data from a number of external Nintendo Wiimote controllers.

Opens and at control-rate polls up to four external Nintendo Wiimote controllers.

ires  wiiconnect  [itimeout, imaxnum]

csound doc: http://csound.com/docs/manual/wiiconnect.html

vactrol :: Sig -> Sig

Envelope follower unit generator.

Envelope follower unit generator emmulating a Perkin Elmer Vactrole VTL5C3/2.

ares  vactrol  asig [iup, idown]

csound doc: http://csound.com/docs/manual/vactrol.html

trigseq :: Sig -> Sig -> Sig -> Sig -> Tab -> [Sig] -> SE ()

Accepts a trigger signal as input and outputs a group of values.

 trigseq  ktrig_in, kstart, kloop, kinitndx, kfn_values, kout1 [, kout2] [...]

csound doc: http://csound.com/docs/manual/trigseq.html

trigger :: Sig -> Sig -> Sig -> Sig

Informs when a krate signal crosses a threshold.

kout  trigger  ksig, kthreshold, kmode

csound doc: http://csound.com/docs/manual/trigger.html

timedseq :: Sig -> Tab -> [Sig] -> Sig

Time Variant Sequencer

An event-sequencer in which time can be controlled by a time-pointer. Sequence data are stored into a table.

ktrig   timedseq   ktimpnt, ifn, kp1 [,kp2, kp3, ...,kpN]

csound doc: http://csound.com/docs/manual/timedseq.html

tempoval :: Sig

Reads the current value of the tempo.

kres  tempoval 

csound doc: http://csound.com/docs/manual/tempoval.html

tempo :: Sig -> D -> SE ()

Apply tempo control to an uninterpreted score.

 tempo  ktempo, istartempo

csound doc: http://csound.com/docs/manual/tempo.html

tempest :: Sig -> D -> D -> D -> D -> D -> D -> D -> D -> Tab -> Sig

Estimate the tempo of beat patterns in a control signal.

ktemp  tempest  kin, iprd, imindur, imemdur, ihp, ithresh, ihtim, ixfdbak, \
          istartempo, ifn [, idisprd] [, itweek]

csound doc: http://csound.com/docs/manual/tempest.html

splitrig :: Sig -> Sig -> D -> Tab -> [Sig] -> SE ()

Split a trigger signal

splitrig splits a trigger signal (i.e. a timed sequence of control-rate impulses) into several channels following a structure designed by the user.

 splitrig  ktrig, kndx, imaxtics, ifn, kout1 [,kout2,...,koutN]

csound doc: http://csound.com/docs/manual/splitrig.html

setscorepos :: D -> SE ()

Sets the playback position of the current score performance to a given position.

  setscorepos  ipos

csound doc: http://csound.com/docs/manual/setscorepos.html

setctrl :: D -> D -> D -> SE ()

Configurable slider controls for realtime user input.

Configurable slider controls for realtime user input. Requires Winsound or TCL/TK. setctrl sets a slider to a specific value, or sets a minimum or maximum range.

 setctrl  inum, ival, itype

csound doc: http://csound.com/docs/manual/setctrl.html

seqtime2 :: Sig -> Sig -> Sig -> Sig -> Sig -> Tab -> Sig

Generates a trigger signal according to the values stored in a table.

ktrig_out  seqtime2  ktrig_in, ktime_unit, kstart, kloop, kinitndx, kfn_times

csound doc: http://csound.com/docs/manual/seqtime2.html

seqtime :: Sig -> Sig -> Sig -> Sig -> Tab -> Sig

Generates a trigger signal according to the values stored in a table.

ktrig_out  seqtime  ktime_unit, kstart, kloop, kinitndx, kfn_times

csound doc: http://csound.com/docs/manual/seqtime.html

sensekey :: Tuple a => a

Returns the ASCII code of a key that has been pressed.

Returns the ASCII code of a key that has been pressed, or -1 if no key has been pressed.

kres[, kkeydown]  sensekey 

csound doc: http://csound.com/docs/manual/sensekey.html

rms :: Sig -> Sig

Determines the root-mean-square amplitude of an audio signal.

Determines the root-mean-square amplitude of an audio signal. It low-pass filters the actual value, to average in the manner of a VU meter.

kres  rms  asig [, ihp] [, iskip]

csound doc: http://csound.com/docs/manual/rms.html

rewindscore :: SE ()

Rewinds the playback position of the current score performance.

Rewinds the playback position of the current score performance..

  rewindscore 

csound doc: http://csound.com/docs/manual/rewindscore.html

readscratch :: D

returns a value stored in the instance of an instrument.

The readscratch opcode returns one of four scalar values stored in the instance of an instrument.

ival  readscratch [index]

csound doc: http://csound.com/docs/manual/readscratch.html

ptrack :: Sig -> D -> (Sig, Sig)

Tracks the pitch of a signal.

ptrack takes an input signal, splits it into ihopsize blocks and using a STFT method, extracts an estimated pitch for its fundamental frequency as well as estimating the total amplitude of the signal in dB, relative to full-scale (0dB). The method implies an analysis window size of 2*ihopsize samples (overlaping by 1/2 window), which has to be a power-of-two, between 128 and 8192 (hopsizes between 64 and 4096). Smaller windows will give better time precision, but worse frequency accuracy (esp. in low fundamentals).This opcode is based on an original algorithm by M. Puckette.

kcps, kamp  ptrack  asig, ihopsize[,ipeaks]

csound doc: http://csound.com/docs/manual/ptrack.html

plltrack :: Sig -> Sig -> (Sig, Sig)

Tracks the pitch of a signal.

plltrack, a pitch tracker based on a phase-locked loop algorithm, described in Zolzer, U, Sankarababu, S.V. and Moller, S, "PLL-based Pitch Detection and Tracking for Audio Signals. Proc. of IIH-MSP 2012".

acps, alock  plltrack  asig, kd [, kloopf, kloopq, klf, khf, kthresh]

csound doc: http://csound.com/docs/manual/plltrack.html

pitchamdf :: Sig -> D -> D -> (Sig, Sig)

Follows the pitch of a signal based on the AMDF method.

Follows the pitch of a signal based on the AMDF method (Average Magnitude Difference Function). Outputs pitch and amplitude tracking signals. The method is quite fast and should run in realtime. This technique usually works best for monophonic signals.

kcps, krms  pitchamdf  asig, imincps, imaxcps [, icps] [, imedi] \
          [, idowns] [, iexcps] [, irmsmedi]

csound doc: http://csound.com/docs/manual/pitchamdf.html

pitch :: Sig -> D -> D -> D -> D -> (Sig, Sig)

Tracks the pitch of a signal.

Using the same techniques as spectrum and specptrk, pitch tracks the pitch of the signal in octave point decimal form, and amplitude in dB.

koct, kamp  pitch  asig, iupdte, ilo, ihi, idbthresh [, ifrqs] [, iconf] \
          [, istrt] [, iocts] [, iq] [, inptls] [, irolloff] [, iskip]

csound doc: http://csound.com/docs/manual/pitch.html

pindex :: D -> D

Returns the value of a specified pfield.

pindex returns the value of a specified pfield.

ivalue  pindex  ipfieldIndex

csound doc: http://csound.com/docs/manual/pindex.html

peak :: Sig -> Sig

Maintains the output equal to the highest absolute value received.

These opcodes maintain the output k-rate variable as the peak absolute level so far received.

kres  peak  asig
kres  peak  ksig

csound doc: http://csound.com/docs/manual/peak.html

pcount :: D

Returns the number of pfields belonging to a note event.

pcount returns the number of pfields belonging to a note event.

icount  pcount 

csound doc: http://csound.com/docs/manual/pcount.html

p5gdata :: Sig -> Sig

Reads data fields from an external P5 Glove.

Reads data fields from a P5 Glove controller.

kres  p5gdata  kcontrol

csound doc: http://csound.com/docs/manual/p5gdata.html

p5gconnect :: SE ()

Reads data from a P5 Glove controller.

Opens and at control-rate polls a P5 Glove controller.

 p5gconnect 

csound doc: http://csound.com/docs/manual/p5gconnect.html

miditempo :: Sig

Returns the current tempo at k-rate, of either the MIDI file (if available) or the score

ksig   miditempo 

csound doc: http://csound.com/docs/manual/miditempo.html

midifilestatus :: Sig

Returns the playback status of MIDI file input.

Returns the current playback status at k-rate, of the input MIDI file, 1 if file is playing, 0 if the end-of-the file has been reached.

ksig   midifilestatus 

csound doc: http://csound.com/docs/manual/midifilestatus.html

joystick :: Sig -> Tab -> Sig

Reads data from a joystick controller.

Reads data from a Linux joystick controller

kres  joystick  kdevice ktab

csound doc: http://csound.com/docs/manual/joystick.html

getcfg :: D -> Str

Return Csound settings.

Return various configuration settings in Svalue as a string at init time.

Svalue  getcfg  iopt

csound doc: http://csound.com/docs/manual/getcfg.html

follow2 :: Sig -> Sig -> Sig -> Sig

Another controllable envelope extractor.

A controllable envelope extractor using the algorithm attributed to Jean-Marc Jot.

ares  follow2  asig, katt, krel

csound doc: http://csound.com/docs/manual/follow2.html

follow :: Sig -> D -> Sig

Envelope follower unit generator.

ares  follow  asig, idt

csound doc: http://csound.com/docs/manual/follow.html

control :: Sig -> Sig

Configurable slider controls for realtime user input.

Configurable slider controls for realtime user input. Requires Winsound or TCL/TK. control reads a slider's value.

kres  control  knum

csound doc: http://csound.com/docs/manual/control.html

checkbox :: Sig -> Sig

Sense on-screen controls.

Sense on-screen controls. Requires Winsound or TCL/TK.

kres  checkbox  knum

csound doc: http://csound.com/docs/manual/checkbox.html

changed2 :: Sig -> Sig

k-rate signal change detector.

This opcode outputs a trigger signal that informs when any one of its k-rate arguments has changed, or a value in an array. Useful with valuator widgets or MIDI controllers.

ktrig  changed2  kvar1 [, kvar2,..., kvarN]
ktrig  changed2  karr[]
ktrig  changed2  aarr[]

csound doc: http://csound.com/docs/manual/changed2.html

changed :: [Sig] -> Sig

k-rate signal change detector.

This opcode outputs a trigger signal that informs when any one of its k-rate arguments has changed. Useful with valuator widgets or MIDI controllers.

ktrig  changed  kvar1 [, kvar2,..., kvarN]

csound doc: http://csound.com/docs/manual/changed.html

prealloc :: D -> D -> SE ()

Creates space for instruments but does not run them.

 prealloc  insnum, icount
 prealloc  "insname", icount

csound doc: http://csound.com/docs/manual/prealloc.html

maxalloc :: D -> D -> SE ()

Limits the number of allocations of an instrument.

 maxalloc  insnum, icount
 maxalloc  Sinsname, icount

csound doc: http://csound.com/docs/manual/maxalloc.html

jacktransport :: D -> SE ()

Start/stop jack_transport and can optionally relocate the playback head.

 jacktransport  icommand [, ilocation]

csound doc: http://csound.com/docs/manual/jacktransport.html

exitnow :: SE ()

Exit Csound as fast as possible, with no cleaning up.

In Csound4 calls an exit function to leave Csound as fast as possible. On Csound5 exits back to the driving code.

 exitnow  [ivalue]

csound doc: http://csound.com/docs/manual/exitnow.html

cpuprc :: D -> D -> SE ()

Control allocation of cpu resources on a per-instrument basis, to optimize realtime output.

 cpuprc  insnum, ipercent
 cpuprc  Sinsname, ipercent

csound doc: http://csound.com/docs/manual/cpuprc.html

cpumeter :: Tuple a => D -> a

Reports the usage of cpu either total or per core.

Reports the usage of cpu either total or per core to monitor how close to max-out the processing is.

ktot[,kcpu1, kcpu2,...] cpumeter  ifreq

csound doc: http://csound.com/docs/manual/cpumeter.html

active :: D -> Sig

Returns the number of active instances of an instrument.

Returns the number of active instances of an instrument with options to ignore releasing instances.

ir  active  insnum [,iopt [,inorel]]
ir  active  Sinsname [,iopt [,inorel]]
kres  active  kinsnum [,iopt [,inorel]]

csound doc: http://csound.com/docs/manual/active.html

scoreline_i :: Str -> SE ()

Issues one or more score line events from an instrument at i-time.

scoreline_i will issue score events at i-time. It can handle strings in the same conditions as the standard score. Multi-line strings are accepted, using {{ }} to enclose the string.

 scoreline_i  Sin

csound doc: http://csound.com/docs/manual/scoreline_i.html

scoreline :: Str -> Sig -> SE ()

Issues one or more score line events from an instrument.

Scoreline will issue one or more score events, if ktrig is 1 every k-period. It can handle strings in the same conditions as the standard score. Multi-line strings are accepted, using {{ }} to enclose the string.

 scoreline  Sin, ktrig

csound doc: http://csound.com/docs/manual/scoreline.html

schedwhen :: Sig -> Sig -> Sig -> Sig -> SE ()

Adds a new score event.

 schedwhen  ktrigger, kinsnum, kwhen, kdur [, ip4] [, ip5] [...]
 schedwhen  ktrigger, "insname", kwhen, kdur [, ip4] [, ip5] [...]

csound doc: http://csound.com/docs/manual/schedwhen.html

schedule :: D -> D -> D -> SE ()

Adds a new score event.

 schedule  insnum, iwhen, idur [, ip4] [, ip5] [...]
 schedule  "insname", iwhen, idur [, ip4] [, ip5] [...]

csound doc: http://csound.com/docs/manual/schedule.html

schedkwhennamed :: Sig -> Sig -> Sig -> Str -> Sig -> Sig -> SE ()

Similar to schedkwhen but uses a named instrument at init-time.

 schedkwhennamed  ktrigger, kmintim, kmaxnum, "name", kwhen, kdur \
          [, ip4] [, ip5] [...]

csound doc: http://csound.com/docs/manual/schedkwhennamed.html

schedkwhen :: Sig -> Sig -> Sig -> Sig -> Sig -> Sig -> SE ()

Adds a new score event generated by a k-rate trigger.

 schedkwhen  ktrigger, kmintim, kmaxnum, kinsnum, kwhen, kdur \
          [, ip4] [, ip5] [...]
 schedkwhen  ktrigger, kmintim, kmaxnum, "insname", kwhen, kdur \
          [, ip4] [, ip5] [...]

csound doc: http://csound.com/docs/manual/schedkwhen.html

remove :: D -> SE ()

Removes the definition of an instrument.

Removes the definition of an instrument as long as it is not in use.

 remove  insnum

csound doc: http://csound.com/docs/manual/remove.html

readscore :: Str -> SE ()

Read, preprocess and schedule a score from an input string.

Readscore will issue one or more score events. It can handle strings in the same conditions as the standard score, including preprocessing (carry, sort, ramp, etc). Multi-line strings are accepted, using {{ }} to enclose the string.

 readscore  Sin 

csound doc: http://csound.com/docs/manual/readscore.html

nstance :: D -> D -> D -> D

Schedules a new instrument instance, storing the instance handle in a variable.

Schedules a new instrument nstance, returning a handle that can be used later to refer directly to the running nstance. This opcode is similar to schedule, but has the added facility of retrieving the nstance handle.

iHandle  nstance  insnum, iwhen, idur [, ip4] [, ip5] [...]
iHandle  nstance  "insname", iwhen, idur [, ip4] [, ip5] [...]

csound doc: http://csound.com/docs/manual/nstance.html

mute :: D -> SE ()

Mutes/unmutes new instances of a given instrument.

 mute  insnum [, iswitch]
 mute  "insname" [, iswitch]

csound doc: http://csound.com/docs/manual/mute.html

event_i :: Str -> D -> D -> D -> [D] -> SE ()

Generates a score event from an instrument.

 event_i  "scorechar", iinsnum, idelay, idur, [, ip4] [, ip5] [, ...]
 event_i  "scorechar", "insname", idelay, idur, [, ip4] [, ip5] [, ...]

csound doc: http://csound.com/docs/manual/event_i.html

event :: Str -> Sig -> Sig -> Sig -> [Sig] -> SE ()

Generates a score event from an instrument.

 event  "scorechar", kinsnum, kdelay, kdur, [, kp4] [, kp5] [, ...]
 event  "scorechar", "insname", kdelay, kdur, [, kp4] [, kp5] [, ...]

csound doc: http://csound.com/docs/manual/event.html

turnon :: D -> SE ()

Activate an instrument for an indefinite time.

 turnon  insnum [, itime]

csound doc: http://csound.com/docs/manual/turnon.html

turnoff :: SE ()

Enables an instrument to turn itself off or to turn an instance of another instrument off.

 turnoff 
 turnoff  inst
 turnoff  knst

csound doc: http://csound.com/docs/manual/turnoff.html

ihold :: SE ()

Creates a held note.

Causes a finite-duration note to become a “held” note

 ihold 

csound doc: http://csound.com/docs/manual/ihold.html

evalstr :: Str -> Sig

Evalstrs evaluates a string containing Csound code, returning a value.

Evalstr compiles and runs Csound code and returns a value from the global space (instr 0). This opcode can be also used to compile new instruments (as compilestr).

ires  evalstr  Scode 
kres  evalstr  Scode, ktrig 

csound doc: http://csound.com/docs/manual/evalstr.html

compilestr :: Str -> D

compiles a new orchestra passed in as an ASCII string

Compilestr will compile one or more instruments at init time, which will be added to the running engine. In case of existing instrument numbers or names, these will be replaced, but any instance still running of the old instrument definition will still perform until it terminates. Only new instances will use the new definition. Multi-line strings are accepted, using {{ }} to enclose the string.

ires  compilestr  Sorch

csound doc: http://csound.com/docs/manual/compilestr.html

compileorc :: Str -> D

compiles a new orchestra from an ASCII file

Compileorc will compile one or more instruments at init time, which will be added to the running engine. In case of existing instrument numbers or names, these will be replaced, but any instance still running of the old instrument definition will still perform until it terminates.

ires  compileorc  Sfilename

csound doc: http://csound.com/docs/manual/compileorc.html

compilecsd :: Str -> D

compiles a new orchestra from an ASCII file

Compilecsd will read a CSD file and compile one or more instruments at init time, which will be added to the running engine. In case of existing instrument numbers or names, these will be replaced, but any instance still running of the old instrument definition will still perform until it terminates. In addition, it will read the score (if it exists) contained in the CSD file and add it to the list of events to be performed by Csound. The opcode ignores any section in the CSD file that is not the orchestra or the score.

ires  compilecsd  Sfilename

csound doc: http://csound.com/docs/manual/compilecsd.html

clockon :: D -> SE ()

Starts one of a number of internal clocks.

 clockon  inum

csound doc: http://csound.com/docs/manual/clockon.html

clockoff :: D -> SE ()

Stops one of a number of internal clocks.

 clockoff  inum

csound doc: http://csound.com/docs/manual/clockoff.html

imagesize :: D -> (D, D)

Return the width and height of a previously opened or created image.

Return the width and height of a previously opened or created image. An image can be loaded with imageload. An empty image can be created with imagecreate.

iwidth, iheight  imagesize  iimagenum

csound doc: http://csound.com/docs/manual/imagesize.html

imagesetpixel :: D -> Sig -> Sig -> Sig -> Sig -> Sig -> SE ()

Set the RGB value of a pixel inside a previously opened or created image.

Set the RGB value of a pixel inside a previously opened or created image. An image can be loaded with imageload. An empty image can be created with imagecreate and saved with imagesave.

 imagesetpixel  iimagenum, ax, ay, ared, agreen, ablue
 imagesetpixel  iimagenum, kx, ky, kred, kgreen, kblue

csound doc: http://csound.com/docs/manual/imagesetpixel.html

imagesave :: D -> Spec -> SE ()

Save a previously created image.

Save a previously created image. An empty image can be created with imagecreate and its pixel RGB values can be set with imagesetpixel. The image will be saved in PNG format.

 imagesave  iimagenum, filename

csound doc: http://csound.com/docs/manual/imagesave.html

imageload :: Spec -> SE D

Load an image.

Load an image and return a reference to it. Individual pixel values can then be accessed with imagegetpixel.

iimagenum  imageload  filename

csound doc: http://csound.com/docs/manual/imageload.html

imagegetpixel :: D -> Sig -> Sig -> (Sig, Sig, Sig)

Return the RGB pixel values of a previously opened or created image.

Return the RGB pixel values of a previously opened or created image. An image can be loaded with imageload. An empty image can be created with imagecreate.

ared, agreen, ablue  imagegetpixel  iimagenum, ax, ay
kred, kgreen, kblue  imagegetpixel  iimagenum, kx, ky

csound doc: http://csound.com/docs/manual/imagegetpixel.html

imagefree :: D -> SE ()

Frees memory allocated for a previously loaded or created image.

 imagefree  iimagenum

csound doc: http://csound.com/docs/manual/imagefree.html

imagecreate :: D -> D -> SE D

Create an empty image of a given size.

Create an empty image of a given size. Individual pixel values can then be set with. imagegetpixel.

iimagenum  imagecreate  iwidth, iheight

csound doc: http://csound.com/docs/manual/imagecreate.html

faustctl :: D -> Str -> Sig -> SE ()

Adjusts a given control in a Faust DSP instance.

Faustctl will set a given control in a running faust program

 faustctl  idsp,Scontrol,kval 

csound doc: http://csound.com/docs/manual/faustctl.html

flShow :: D -> SE ()

Restores the visibility of a previously hidden FLTK widget.

FLshow restores the visibility of a previously hidden widget.

 FLshow  ihandle

csound doc: http://csound.com/docs/manual/FLshow.html

flSetTextType :: D -> D -> SE ()

Sets some font attributes of the text label of a FLTK widget.

FLsetTextType sets some attributes related to the fonts of the text label of the target widget.

 FLsetTextType  itype, ihandle

csound doc: http://csound.com/docs/manual/FLsetTextType.html

flSetTextSize :: D -> D -> SE ()

Sets the size of the text label of a FLTK widget.

FLsetTextSize sets the size of the text label of the target widget.

 FLsetTextSize  isize, ihandle

csound doc: http://csound.com/docs/manual/FLsetTextSize.html

flSetTextColor :: D -> D -> D -> D -> SE ()

Sets the color of the text label of a FLTK widget.

FLsetTextColor sets the color of the text label of the target widget.

 FLsetTextColor  ired, iblue, igreen, ihandle

csound doc: http://csound.com/docs/manual/FLsetTextColor.html

flSetText :: Str -> D -> SE ()

Sets the label of a FLTK widget.

FLsetText sets the label of the target widget to the double-quoted text string provided with the itext argument.

 FLsetText  "itext", ihandle
 FLsetText  istr, ihandle

csound doc: http://csound.com/docs/manual/FLsetText.html

flSetSize :: D -> D -> D -> SE ()

Resizes a FLTK widget.

FLsetSize resizes the target widget (not the size of its text) according to the iwidth and iheight arguments.

 FLsetSize  iwidth, iheight, ihandle

csound doc: http://csound.com/docs/manual/FLsetSize.html

flSetPosition :: D -> D -> D -> SE ()

Sets the position of a FLTK widget.

FLsetPosition sets the position of the target widget according to the ix and iy arguments.

 FLsetPosition  ix, iy, ihandle

csound doc: http://csound.com/docs/manual/FLsetPosition.html

flSetFont :: D -> D -> SE ()

Sets the font type of a FLTK widget.

FLsetFont sets the font type of the target widget.

 FLsetFont  ifont, ihandle

csound doc: http://csound.com/docs/manual/FLsetFont.html

flSetColor2 :: D -> D -> D -> D -> SE ()

Sets the secondary (or selection) color of a FLTK widget.

FLsetColor2 sets the secondary (or selection) color of the target widget.

 FLsetColor2  ired, igreen, iblue, ihandle

csound doc: http://csound.com/docs/manual/FLsetColor2.html

flSetColor :: D -> D -> D -> D -> SE ()

Sets the primary color of a FLTK widget.

FLsetColor sets the primary color of the target widget.

 FLsetColor  ired, igreen, iblue, ihandle

csound doc: http://csound.com/docs/manual/FLsetColor.html

flSetBox :: D -> D -> SE ()

Sets the appearance of a box surrounding a FLTK widget.

FLsetBox sets the appearance of a box surrounding the target widget.

 FLsetBox  itype, ihandle

csound doc: http://csound.com/docs/manual/FLsetBox.html

flSetAlign :: D -> D -> SE ()

Sets the text alignment of a label of a FLTK widget.

FLsetAlign sets the text alignment of the label of the target widget.

 FLsetAlign  ialign, ihandle

csound doc: http://csound.com/docs/manual/FLsetAlign.html

flLabel :: D -> D -> D -> D -> D -> D -> SE ()

A FLTK opcode that modifies the appearance of a text label.

Modifies a set of parameters related to the text label appearence of a widget (i.e. size, font, alignment and color of corresponding text).

 FLlabel  isize, ifont, ialign, ired, igreen, iblue

csound doc: http://csound.com/docs/manual/FLlabel.html

flHide :: D -> SE ()

Hides the target FLTK widget.

Hides the target FLTK widget, making it invisible.

 FLhide  ihandle

csound doc: http://csound.com/docs/manual/FLhide.html

flColor2 :: D -> D -> D -> SE ()

A FLTK opcode that sets the secondary (selection) color.

FLcolor2 is the same of FLcolor except it affects the secondary (selection) color.

 FLcolor2  ired, igreen, iblue

csound doc: http://csound.com/docs/manual/FLcolor2.html

flColor :: D -> D -> D -> SE ()

A FLTK opcode that sets the primary colors.

Sets the primary colors to RGB values given by the user.

 FLcolor  ired, igreen, iblue [, ired2, igreen2, iblue2]

csound doc: http://csound.com/docs/manual/FLcolor.html

vphaseseg :: Sig -> D -> D -> [D] -> SE ()

Allows one-dimensional HVS (Hyper-Vectorial Synthesis).

vphaseseg allows one-dimensional HVS (Hyper-Vectorial Synthesis).

 vphaseseg  kphase, ioutab, ielems, itab1,idist1,itab2 \
          [,idist2,itab3, ... ,idistN-1,itabN]

csound doc: http://csound.com/docs/manual/vphaseseg.html

flXyin :: D -> D -> D -> D -> D -> D -> D -> D -> SE (Sig, Sig, Sig)

Senses the mouse cursor position in a user-defined area inside an FLpanel.

Similar to xyin, sense the mouse cursor position in a user-defined area inside an FLpanel.

koutx, kouty, kinside   FLxyin  ioutx_min, ioutx_max, iouty_min, iouty_max, \
          iwindx_min, iwindx_max, iwindy_min, iwindy_max [, iexpx, iexpy, ioutx, iouty]

csound doc: http://csound.com/docs/manual/FLxyin.html

flVslidBnk2 :: Str -> D -> D -> D -> SE ()

A FLTK widget containing a bank of vertical sliders.

FLvslidBnk2 is a widget containing a bank of vertical sliders.

 FLvslidBnk2  "names", inumsliders, ioutable, iconfigtable [,iwidth, iheight, ix, iy, istart_index]

csound doc: http://csound.com/docs/manual/FLvslidBnk2.html

flVslidBnk :: Str -> D -> SE ()

A FLTK widget containing a bank of vertical sliders.

FLvslidBnk is a widget containing a bank of vertical sliders.

 FLvslidBnk  "names", inumsliders [, ioutable] [, iwidth] [, iheight] [, ix] \
          [, iy] [, itypetable] [, iexptable] [, istart_index] [, iminmaxtable]

csound doc: http://csound.com/docs/manual/FLvslidBnk.html

flVkeybd :: Str -> D -> D -> D -> D -> SE ()

An FLTK widget opcode that creates a virtual keyboard widget.

An FLTK widget opcode that creates a virtual keyboard widget. This must be used in conjunction with the virtual midi keyboard driver for this to operate correctly. The purpose of this opcode is for making demo versions of MIDI orchestras with the virtual keyboard embedded within the main window.

 FLvkeybd  "keyboard.map", iwidth, iheight, ix, iy

csound doc: http://csound.com/docs/manual/FLvkeybd.html

flValue :: Str -> D -> D -> D -> D -> SE D

Shows the current value of a FLTK valuator.

FLvalue shows current the value of a valuator in a text field.

ihandle  FLvalue  "label", iwidth, iheight, ix, iy

csound doc: http://csound.com/docs/manual/FLvalue.html

flUpdate :: SE ()

Same as the FLrun opcode.

 FLupdate 

csound doc: http://csound.com/docs/manual/FLupdate.html

flSlidBnkSetk :: Sig -> D -> Tab -> SE ()

modify the values of a slider bank.

FLslidBnkSetk modifies the values of a slider bank according to an array of values stored in a table.

 FLslidBnkSetk   ktrig, ihandle, ifn [, istartIndex, istartSlid, inumSlid]

csound doc: http://csound.com/docs/manual/FLslidBnkSetk.html

flSlidBnkSet :: D -> Tab -> SE ()

modify the values of a slider bank.

FLslidBnkSet modifies the values of a slider bank according to an array of values stored in a table.

 FLslidBnkSet  ihandle, ifn [, istartIndex, istartSlid, inumSlid]

csound doc: http://csound.com/docs/manual/FLslidBnkSet.html

flSlidBnkGetHandle :: SE D

gets the handle of last slider bank created.

FLslidBnkGetHandle gets the handle of last slider bank created.

ihandle  FLslidBnkGetHandle 

csound doc: http://csound.com/docs/manual/FLslidBnkGetHandle.html

flSlidBnk2Setk :: Sig -> D -> Tab -> SE ()

modify the values of a slider bank.

FLslidBnk2Setk modifies the values of a slider bank according to an array of values stored in a table.

 FLslidBnk2Setk   ktrig, ihandle, ifn [, istartIndex, istartSlid, inumSlid]

csound doc: http://csound.com/docs/manual/FLslidBnk2Setk.html

flSlidBnk2Set :: D -> Tab -> SE ()

modify the values of a slider bank.

FLslidBnk2Set modifies the values of a slider bank according to an array of values stored in a table.

 FLslidBnk2Set  ihandle, ifn [, istartIndex, istartSlid, inumSlid]

csound doc: http://csound.com/docs/manual/FLslidBnk2Set.html

flSlidBnk2 :: Str -> D -> D -> D -> SE ()

A FLTK widget containing a bank of horizontal sliders.

FLslidBnk2 is a widget containing a bank of horizontal sliders.

 FLslidBnk2  "names", inumsliders, ioutable, iconfigtable [,iwidth, iheight, ix, iy, istart_index] 
 FLslidBnk2  istring, inumsliders, ioutable, iconfigtable [,iwidth, iheight, ix, iy, istart_index] 

csound doc: http://csound.com/docs/manual/FLslidBnk2.html

flSlidBnk :: Str -> D -> SE ()

A FLTK widget containing a bank of horizontal sliders.

FLslidBnk is a widget containing a bank of horizontal sliders.

 FLslidBnk  "names", inumsliders [, ioutable] [, iwidth] [, iheight] [, ix] \
          [, iy] [, itypetable] [, iexptable] [, istart_index] [, iminmaxtable]

csound doc: http://csound.com/docs/manual/FLslidBnk.html

flSetVal_i :: D -> D -> SE ()

Sets the value of a FLTK valuator to a number provided by the user.

FLsetVal_i forces the value of a valuator to a number provided by the user.

 FLsetVal_i  ivalue, ihandle

csound doc: http://csound.com/docs/manual/FLsetVal_i.html

flSetVal :: Sig -> Sig -> D -> SE ()

Sets the value of a FLTK valuator at control-rate.

FLsetVal is almost identical to FLsetVal_i. Except it operates at k-rate and it affects the target valuator only when ktrig is set to a non-zero value.

 FLsetVal  ktrig, kvalue, ihandle

csound doc: http://csound.com/docs/manual/FLsetVal.html

flSetSnapGroup :: D -> SE ()

Determines the snapshot group for FL valuators.

FLsetSnapGroup determines the snapshot group of valuators declared after it.

 FLsetSnapGroup  igroup

csound doc: http://csound.com/docs/manual/FLsetSnapGroup.html

flSetsnap :: D -> SE (D, D)

Stores the current status of all FLTK valuators into a snapshot location.

FLsetsnap stores the current status of all valuators present in the orchestra into a snapshot location (in memory).

inumsnap, inumval  FLsetsnap  index [, ifn, igroup]

csound doc: http://csound.com/docs/manual/FLsetsnap.html

flSavesnap :: Str -> SE ()

Saves all snapshots currently created into a file.

FLsavesnap saves all snapshots currently created (i.e. the entire memory bank) into a file.

 FLsavesnap  "filename" [, igroup]

csound doc: http://csound.com/docs/manual/FLsavesnap.html

flRun :: SE ()

Starts the FLTK widget thread.

 FLrun 

csound doc: http://csound.com/docs/manual/FLrun.html

flPrintk2 :: Sig -> D -> SE ()

A FLTK opcode that prints a new value every time a control-rate variable changes.

FLprintk2 is similar to FLprintk but shows a k-rate variable's value only when it changes.

 FLprintk2  kval, idisp

csound doc: http://csound.com/docs/manual/FLprintk2.html

flPrintk :: D -> Sig -> D -> SE ()

A FLTK opcode that prints a k-rate value at specified intervals.

FLprintk is similar to printk but shows values of a k-rate signal in a text field instead of on the console.

 FLprintk  itime, kval, idisp

csound doc: http://csound.com/docs/manual/FLprintk.html

flMouse :: Tuple a => SE a

Returns the mouse position and the state of the three mouse buttons.

FLmouse returns the coordinates of the mouse position within an FLTK panel and the state of the three mouse buttons.

kx, ky, kb1, kb2, kb3  FLmouse  [imode]

csound doc: http://csound.com/docs/manual/FLmouse.html

flLoadsnap :: Str -> SE ()

Loads all snapshots into the memory bank of the current orchestra.

FLloadsnap loads all the snapshots contained in a file into the memory bank of the current orchestra.

 FLloadsnap  "filename" [, igroup]

csound doc: http://csound.com/docs/manual/FLloadsnap.html

flKeyIn :: SE Sig

Reports keys pressed (on alphanumeric keyboard) when an FLTK panel has focus.

FLkeyIn informs about the status of a key pressed by the user on the alphanumeric keyboard when an FLTK panel has got the focus.

kascii  FLkeyIn  [ifn]

csound doc: http://csound.com/docs/manual/FLkeyIn.html

flHvsBoxSetValue :: Sig -> Sig -> D -> SE ()

Sets the cursor position of a previously-declared FLhvsBox widget.

FLhvsBoxSetValue sets the cursor position of a previously-declared FLhvsBox widget.

 FLhvsBoxSetValue  kx, ky, ihandle

csound doc: http://csound.com/docs/manual/FLhvsBoxSetValue.html

flHvsBox :: D -> D -> D -> D -> D -> D -> SE D

Displays a box with a grid useful for visualizing two-dimensional Hyper Vectorial Synthesis.

FLhvsBox displays a box with a grid useful for visualizing two-dimensional Hyper Vectorial Synthesis.

ihandle  FLhvsBox  inumlinesX, inumlinesY, iwidth, iheight, ix, iy

csound doc: http://csound.com/docs/manual/FLhvsBox.html

flGetsnap :: D -> SE D

Retrieves a previously stored FLTK snapshot.

Retrieves a previously stored snapshot (in memory), i.e. sets all valuator to the corresponding values stored in that snaphot.

inumsnap  FLgetsnap  index [, igroup]

csound doc: http://csound.com/docs/manual/FLgetsnap.html

flExecButton :: Str -> D -> D -> D -> D -> SE D

A FLTK widget opcode that creates a button that executes a command.

A FLTK widget opcode that creates a button that executes a command. Useful for opening up HTML documentation as About text or to start a separate program from an FLTK widget interface.

ihandle  FLexecButton  "command", iwidth, iheight, ix, iy

csound doc: http://csound.com/docs/manual/FLexecButton.html

flCloseButton :: Str -> D -> D -> D -> D -> SE D

A FLTK widget opcode that creates a button that will close the panel window it is a part of.

ihandle  FLcloseButton  "label", iwidth, iheight, ix, iy

csound doc: http://csound.com/docs/manual/FLcloseButton.html

flButton :: Str -> D -> D -> D -> D -> D -> D -> D -> D -> SE (Sig, D)

A FLTK widget opcode that creates a button.

kout, ihandle  FLbutton  "label", ion, ioff, itype, iwidth, iheight, ix, \
          iy, iopcode [, kp1] [, kp2] [, kp3] [, kp4] [, kp5] [....] [, kpN]

csound doc: http://csound.com/docs/manual/FLbutton.html

flButBank :: D -> D -> D -> D -> D -> D -> D -> D -> SE (Sig, D)

A FLTK widget opcode that creates a bank of buttons.

kout, ihandle  FLbutBank  itype, inumx, inumy, iwidth, iheight, ix, iy, \
          iopcode [, kp1] [, kp2] [, kp3] [, kp4] [, kp5] [....] [, kpN]

csound doc: http://csound.com/docs/manual/FLbutBank.html

flBox :: Str -> D -> D -> D -> D -> D -> D -> D -> SE D

A FLTK widget that displays text inside of a box.

ihandle  FLbox  "label", itype, ifont, isize, iwidth, iheight, ix, iy [, image]
ihandle  FLbox  istr, itype, ifont, isize, iwidth, iheight, ix, iy [, image]

csound doc: http://csound.com/docs/manual/FLbox.html

flText :: Str -> D -> D -> D -> D -> D -> D -> D -> D -> SE (Sig, D)

A FLTK widget opcode that creates a textbox.

FLtext allows the user to modify a parameter value by directly typing it into a text field.

kout, ihandle  FLtext  "label", imin, imax, istep, itype, iwidth, \
          iheight, ix, iy

csound doc: http://csound.com/docs/manual/FLtext.html

flSlider :: Str -> D -> D -> D -> D -> D -> D -> D -> D -> D -> SE (Sig, D)

Puts a slider into the corresponding FLTK container.

FLslider puts a slider into the corresponding container.

kout, ihandle  FLslider  "label", imin, imax, iexp, itype, idisp, iwidth, \
          iheight, ix, iy

csound doc: http://csound.com/docs/manual/FLslider.html

flRoller :: Str -> D -> D -> D -> D -> D -> D -> D -> D -> D -> D -> SE (Sig, D)

A FLTK widget that creates a transversal knob.

FLroller is a sort of knob, but put transversally.

kout, ihandle  FLroller  "label", imin, imax, istep, iexp, itype, idisp, \
          iwidth, iheight, ix, iy

csound doc: http://csound.com/docs/manual/FLroller.html

flKnob :: Str -> D -> D -> D -> D -> D -> D -> D -> D -> SE (Sig, D)

A FLTK widget opcode that creates a knob.

kout, ihandle  FLknob  "label", imin, imax, iexp, itype, idisp, iwidth, \
          ix, iy [, icursorsize]

csound doc: http://csound.com/docs/manual/FLknob.html

flJoy :: Str -> D -> D -> D -> D -> D -> D -> D -> D -> D -> D -> D -> D -> SE (Sig, Sig, D, D)

A FLTK opcode that acts like a joystick.

FLjoy is a squared area that allows the user to modify two output values at the same time. It acts like a joystick.

koutx, kouty, ihandlex, ihandley  FLjoy  "label", iminx, imaxx, iminy, \
          imaxy, iexpx, iexpy, idispx, idispy, iwidth, iheight, ix, iy

csound doc: http://csound.com/docs/manual/FLjoy.html

flCount :: Str -> D -> D -> D -> D -> D -> D -> D -> D -> D -> D -> SE (Sig, D)

A FLTK widget opcode that creates a counter.

Allows the user to increase/decrease a value with mouse clicks on a corresponding arrow button.

kout, ihandle  FLcount  "label", imin, imax, istep1, istep2, itype, \
          iwidth, iheight, ix, iy, iopcode [, kp1] [, kp2] [, kp3] [...] [, kpN]

csound doc: http://csound.com/docs/manual/FLcount.html

flTabsEnd :: SE ()

Marks the end of a tabbed FLTK interface.

 FLtabsEnd 

csound doc: http://csound.com/docs/manual/FLtabsEnd.html

flTabs :: D -> D -> D -> D -> SE ()

Creates a tabbed FLTK interface.

FLtabs is a “file card tabs” interface that is useful to display several areas containing widgets in the same windows, alternatively. It must be used together with FLgroup, another container that groups child widgets.

 FLtabs  iwidth, iheight, ix, iy

csound doc: http://csound.com/docs/manual/FLtabs.html

flScrollEnd :: SE ()

A FLTK opcode that marks the end of an area with scrollbars.

 FLscrollEnd 

csound doc: http://csound.com/docs/manual/FLscrollEnd.html

flScroll :: D -> D -> SE ()

A FLTK opcode that adds scroll bars to an area.

FLscroll adds scroll bars to an area.

 FLscroll  iwidth, iheight [, ix] [, iy]

csound doc: http://csound.com/docs/manual/FLscroll.html

flPanelEnd :: SE ()

Marks the end of a group of FLTK widgets contained inside of a window (panel).

 FLpanelEnd 

csound doc: http://csound.com/docs/manual/FLpanelEnd.html

flPanel :: Str -> D -> D -> SE ()

Creates a window that contains FLTK widgets.

 FLpanel  "label", iwidth, iheight [, ix] [, iy] [, iborder] [, ikbdcapture] [, iclose]

csound doc: http://csound.com/docs/manual/FLpanel.html

flPackEnd :: SE ()

Marks the end of a group of compressed or aligned FLTK widgets.

 FLpackEnd 

csound doc: http://csound.com/docs/manual/FLpackEnd.html

flPack :: D -> D -> D -> D -> D -> D -> D -> SE ()

Provides the functionality of compressing and aligning FLTK widgets.

FLpack provides the functionality of compressing and aligning widgets.

 FLpack  iwidth, iheight, ix, iy, itype, ispace, iborder

csound doc: http://csound.com/docs/manual/FLpack.html

flGroupEnd :: SE ()

Marks the end of a group of FLTK child widgets.

 FLgroupEnd 

csound doc: http://csound.com/docs/manual/FLgroupEnd.html

flGroup :: Str -> D -> D -> D -> D -> SE ()

A FLTK container opcode that groups child widgets.

 FLgroup  "label", iwidth, iheight, ix, iy [, iborder] [, image]

csound doc: http://csound.com/docs/manual/FLgroup.html

link_tempo_set :: D -> Sig -> SE ()

Sets the tempo.

Sets the local tempo if this peer is not enabled; sets the tempo of the global network Ableton Link session if this peer is enabled.

 link_tempo_set  i_peer, k_bpm [, k_at_time_seconds]

csound doc: http://csound.com/docs/manual/link_tempo_set.html

link_tempo_get :: D -> Sig

Returns the current tempo of the global network Ableton Link session.

k_bpm  link_tempo_get  i_peer

csound doc: http://csound.com/docs/manual/link_tempo_get.html

link_peers :: D -> Sig

Returns the number of peers in the session.

Returns the number of peers in the global network Ableton Link session.

k_count  link_peers  i_peer

csound doc: http://csound.com/docs/manual/link_peers.html

link_metro :: D -> (Sig, Sig, Sig, Sig)

Returns a trigger that is 1 on the beat and 0 otherwise along with beat, phase, and time for this session of Ableton Link.

Returns a trigger that is 1 on the beat and 0 otherwise along with the beat, phase, and current time of Ableton Link for this session for a given quantum.

k_trigger, k_beat, k_phase, k_current_time_seconds  link_metro  i_peer [, k_quantum]

csound doc: http://csound.com/docs/manual/link_metro.html

link_is_enabled :: D -> Sig

Returns whether or not this peer is synchronized with the global network Ableton Link session.

Returns whether or not the beat and time of his peer are synchronized with the global network Ableton Link session.

k_is_enabled  link_is_enabled  i_peer

csound doc: http://csound.com/docs/manual/link_is_enabled.html

ableton_link_enable :: D -> SE ()

Enable or disable synchronization with the Ableton Link session.

Enable or disable synchronization with the global network Ableton Link session tempo and beat.

  ableton_link_enable  i_peer [, k_enable]

csound doc: http://csound.com/docs/manual/link_enable.html

link_create :: D

Creates a peer in an Ableton Link network session.

Creates a peer in an Ableton Link network session. The first peer in a session determines the initial tempo of the session. The value returned must be passed as the first parameter to all subsequent Ableton Link opcode calls for this peer.

i_peer  link_create  [i_bpm]

csound doc: http://csound.com/docs/manual/link_create.html

link_beat_request :: D -> Sig -> SE ()

Requests the global network Ableton Link session to adopt a specific beat number and time.

 link_beat_request   i_peer, k_beat [, k_at_time_seconds  [, k_quantum ]] 

csound doc: http://csound.com/docs/manual/link_beat_request.html

link_beat_get :: D -> (Sig, Sig, Sig)

Returns the beat, phase with respect to the local quantum, and current time for the session.

Returns the beat number, phase of the beat with respect to the local quantum of the beat, and current time for the global network Ableton Link session.

k_beat_number, k_phase, k_current_time_seconds  link_beat_get  i_peer [, k_quantum]

csound doc: http://csound.com/docs/manual/link_beat_get.html

link_beat_force :: D -> Sig -> SE ()

Forces the global network Ableton Link session to adopt a specific beat number and time.

Forces the global network Ableton Link session to adopt a specific beat number and time, like a conductor stopping an orchestra and immediately starting it again.

 link_beat_force   i_peer, k_beat [, k_at_time_seconds  [, k_quantum ]] 

csound doc: http://csound.com/docs/manual/link_beat_force.html