dns-2.0.11: DNS library in Haskell

Safe HaskellNone
LanguageHaskell2010

Network.DNS.Lookup

Description

Simple, high-level DNS lookup functions.

All of the lookup functions necessary run in IO, since they interact with the network. The return types are similar, but differ in what can be returned from a successful lookup.

We can think of the return type as "either what I asked for, or an error". For example, the lookupA function, if successful, will return a list of IPv4. The lookupMX function will instead return a list of (Domain,Int) pairs, where each pair represents a hostname and its associated priority.

The order of multiple results may not be consistent between lookups. If you require consistent results, apply sort to the returned list.

The errors that can occur are the same for all lookups. Namely:

  • Timeout
  • Wrong sequence number (foul play?)
  • Unexpected data in the response

If an error occurs, you should be able to pattern match on the DNSError constructor to determine which of these is the case.

Note: A result of "no records" is not considered an error. If you perform, say, an 'AAAA' lookup for a domain with no such records, the "success" result would be Right [].

We perform a successful lookup of "www.example.com":

>>> let hostname = Data.ByteString.Char8.pack "www.example.com"
>>> 
>>> rs <- makeResolvSeed defaultResolvConf
>>> withResolver rs $ \resolver -> lookupA resolver hostname
Right [93.184.216.34]

The only error that we can easily cause is a timeout. We do this by creating and utilizing a ResolvConf which has a timeout of one millisecond:

>>> let hostname = Data.ByteString.Char8.pack "www.example.com"
>>> let badrc = defaultResolvConf { resolvTimeout = 1 }
>>> 
>>> rs <- makeResolvSeed badrc
>>> withResolver rs $ \resolver -> lookupA resolver hostname
Left TimeoutExpired

As is the convention, successful results will always be wrapped in a Right, while errors will be wrapped in a Left.

For convenience, you may wish to enable GHC's OverloadedStrings extension. This will allow you to avoid calling pack on each domain name. See http://www.haskell.org/ghc/docs/7.6.3/html/users_guide/type-class-extensions.html#overloaded-strings for more information.

Synopsis

Documentation

lookupA :: Resolver -> Domain -> IO (Either DNSError [IPv4]) Source #

Look up all 'A' records for the given hostname.

A straightforward example:

>>> let hostname = Data.ByteString.Char8.pack "www.mew.org"
>>> 
>>> rs <- makeResolvSeed defaultResolvConf
>>> withResolver rs $ \resolver -> lookupA resolver hostname
Right [210.130.207.72]

This function will also follow a CNAME and resolve its target if one exists for the queries hostname:

>>> let hostname = Data.ByteString.Char8.pack "www.kame.net"
>>> 
>>> rs <- makeResolvSeed defaultResolvConf
>>> withResolver rs $ \resolver -> lookupA resolver hostname
Right [203.178.141.194]

lookupAAAA :: Resolver -> Domain -> IO (Either DNSError [IPv6]) Source #

Look up all (IPv6) 'AAAA' records for the given hostname.

Examples:

>>> let hostname = Data.ByteString.Char8.pack "www.wide.ad.jp"
>>> 
>>> rs <- makeResolvSeed defaultResolvConf
>>> withResolver rs $ \resolver -> lookupAAAA resolver hostname
Right [2001:200:dff:fff1:216:3eff:fe4b:651c]

lookupMX :: Resolver -> Domain -> IO (Either DNSError [(Domain, Int)]) Source #

Look up all 'MX' records for the given hostname. Two parts constitute an MX record: a hostname , and an integer priority. We therefore return each record as a (Domain, Int).

In this first example, we look up the MX for the domain "example.com". It has no MX (to prevent a deluge of spam from examples posted on the internet). But remember, "no results" is still a successful result.

>>> let hostname = Data.ByteString.Char8.pack "example.com"
>>> 
>>> rs <- makeResolvSeed defaultResolvConf
>>> withResolver rs $ \resolver -> lookupMX resolver hostname
Right []

The domain "mew.org" does however have a single MX:

>>> let hostname = Data.ByteString.Char8.pack "mew.org"
>>> 
>>> rs <- makeResolvSeed defaultResolvConf
>>> withResolver rs $ \resolver -> lookupMX resolver hostname
Right [("mail.mew.org.",10)]

Also note that all hostnames are returned with a trailing dot to indicate the DNS root.

lookupAviaMX :: Resolver -> Domain -> IO (Either DNSError [IPv4]) Source #

Look up all 'MX' records for the given hostname, and then resolve their hostnames to IPv4 addresses by calling lookupA. The priorities are not retained.

Examples:

>>> import Data.List (sort)
>>> let hostname = Data.ByteString.Char8.pack "wide.ad.jp"
>>> 
>>> rs <- makeResolvSeed defaultResolvConf
>>> ips <- withResolver rs $ \resolver -> lookupAviaMX resolver hostname
>>> fmap sort ips
Right [133.138.10.34,203.178.136.49]

Since there is more than one result, it is necessary to sort the list in order to check for equality.

lookupAAAAviaMX :: Resolver -> Domain -> IO (Either DNSError [IPv6]) Source #

Look up all 'MX' records for the given hostname, and then resolve their hostnames to IPv6 addresses by calling lookupAAAA. The priorities are not retained.

lookupNS :: Resolver -> Domain -> IO (Either DNSError [Domain]) Source #

Look up all 'NS' records for the given hostname. The results are taken from the ANSWER section of the response (as opposed to AUTHORITY). For details, see e.g. http://www.zytrax.com/books/dns/ch15/.

There will typically be more than one name server for a domain. It is therefore extra important to sort the results if you prefer them to be at all deterministic.

Examples:

>>> import Data.List (sort)
>>> let hostname = Data.ByteString.Char8.pack "mew.org"
>>> 
>>> rs <- makeResolvSeed defaultResolvConf
>>> ns <- withResolver rs $ \resolver -> lookupNS resolver hostname
>>> fmap sort ns
Right ["ns1.mew.org.","ns2.mew.org."]

lookupNSAuth :: Resolver -> Domain -> IO (Either DNSError [Domain]) Source #

Look up all 'NS' records for the given hostname. The results are taken from the AUTHORITY section of the response and not the usual ANSWER (use lookupNS for that). For details, see e.g. http://www.zytrax.com/books/dns/ch15/.

There will typically be more than one name server for a domain. It is therefore extra important to sort the results if you prefer them to be at all deterministic.

For an example, we can look up the nameservers for "example.com" from one of the root servers, a.gtld-servers.net, the IP address of which was found beforehand:

>>> import Data.List (sort)
>>> let hostname = Data.ByteString.Char8.pack "example.com"
>>> 
>>> let ri = RCHostName "192.5.6.30" -- a.gtld-servers.net
>>> let rc = defaultResolvConf { resolvInfo = ri }
>>> rs <- makeResolvSeed rc
>>> ns <- withResolver rs $ \resolver -> lookupNSAuth resolver hostname
>>> fmap sort ns
Right ["a.iana-servers.net.","b.iana-servers.net."]

lookupTXT :: Resolver -> Domain -> IO (Either DNSError [ByteString]) Source #

Look up all 'TXT' records for the given hostname. The results are free-form ByteStrings.

Two common uses for 'TXT' records are http://en.wikipedia.org/wiki/Sender_Policy_Framework and http://en.wikipedia.org/wiki/DomainKeys_Identified_Mail. As an example, we find the SPF record for "mew.org":

>>> let hostname = Data.ByteString.Char8.pack "mew.org"
>>> 
>>> rs <- makeResolvSeed defaultResolvConf
>>> withResolver rs $ \resolver -> lookupTXT resolver hostname
Right ["v=spf1 +mx -all"]

lookupPTR :: Resolver -> Domain -> IO (Either DNSError [Domain]) Source #

Look up all 'PTR' records for the given hostname. To perform a reverse lookup on an IP address, you must first reverse its octets and then append the suffix ".in-addr.arpa."

We look up the PTR associated with the IP address 210.130.137.80, i.e., 80.137.130.210.in-addr.arpa:

>>> let hostname = Data.ByteString.Char8.pack "164.2.232.202.in-addr.arpa"
>>> 
>>> rs <- makeResolvSeed defaultResolvConf
>>> withResolver rs $ \resolver -> lookupPTR resolver hostname
Right ["www.iij.ad.jp."]

The lookupRDNS function is more suited to this particular task.

lookupRDNS :: Resolver -> Domain -> IO (Either DNSError [Domain]) Source #

Convenient wrapper around lookupPTR to perform a reverse lookup on a single IP address.

We repeat the example from lookupPTR, except now we pass the IP address directly:

>>> let hostname = Data.ByteString.Char8.pack "202.232.2.164"
>>> 
>>> rs <- makeResolvSeed defaultResolvConf
>>> withResolver rs $ \resolver -> lookupRDNS resolver hostname
Right ["www.iij.ad.jp."]

lookupSRV :: Resolver -> Domain -> IO (Either DNSError [(Int, Int, Int, Domain)]) Source #

Look up all 'SRV' records for the given hostname. SRV records consist (see https://tools.ietf.org/html/rfc2782) of the following four fields:

  • Priority (lower is more-preferred)
  • Weight (relative frequency with which to use this record amongst all results with the same priority)
  • Port (the port on which the service is offered)
  • Target (the hostname on which the service is offered)

The first three are integral, and the target is another DNS hostname. We therefore return a four-tuple (Int,Int,Int,Domain).

Examples:

>>> let q = Data.ByteString.Char8.pack "_xmpp-server._tcp.jabber.ietf.org"
>>> 
>>> rs <- makeResolvSeed defaultResolvConf
>>> withResolver rs $ \resolver -> lookupSRV resolver q
Right [(5,0,5269,"jabber.ietf.org.")]