Safe Haskell | Safe-Inferred |
---|---|

Language | Haskell2010 |

Deprecated: This module is provided as documentation of all new functions, you should import the more specific modules directly.

This module documents all the functions available in this package.

Most users should import the specific modules (e.g. `Data.List.Extra`

), which
also reexport their non-`Extra`

modules (e.g. `Data.List`

).

## Synopsis

- withNumCapabilities :: Int -> IO a -> IO a
- once :: IO a -> IO (IO a)
- onceFork :: IO a -> IO (IO a)
- data Lock
- newLock :: IO Lock
- withLock :: Lock -> IO a -> IO a
- withLockTry :: Lock -> IO a -> IO (Maybe a)
- data Var a
- newVar :: a -> IO (Var a)
- readVar :: Var a -> IO a
- writeVar :: Var a -> a -> IO ()
- writeVar' :: Var a -> a -> IO ()
- modifyVar :: Var a -> (a -> IO (a, b)) -> IO b
- modifyVar' :: Var a -> (a -> IO (a, b)) -> IO b
- modifyVar_ :: Var a -> (a -> IO a) -> IO ()
- modifyVar_' :: Var a -> (a -> IO a) -> IO ()
- withVar :: Var a -> (a -> IO b) -> IO b
- data Barrier a
- newBarrier :: IO (Barrier a)
- signalBarrier :: Partial => Barrier a -> a -> IO ()
- waitBarrier :: Barrier a -> IO a
- waitBarrierMaybe :: Barrier a -> IO (Maybe a)
- type Partial = HasCallStack
- retry :: Int -> IO a -> IO a
- retryBool :: Exception e => (e -> Bool) -> Int -> IO a -> IO a
- errorWithoutStackTrace :: forall (r :: RuntimeRep) (a :: TYPE r). [Char] -> a
- showException :: Show e => e -> IO String
- stringException :: String -> IO String
- errorIO :: Partial => String -> IO a
- assertIO :: Partial => Bool -> IO ()
- ignore :: IO () -> IO ()
- catch_ :: IO a -> (SomeException -> IO a) -> IO a
- handle_ :: (SomeException -> IO a) -> IO a -> IO a
- try_ :: IO a -> IO (Either SomeException a)
- catchJust_ :: (SomeException -> Maybe b) -> IO a -> (b -> IO a) -> IO a
- handleJust_ :: (SomeException -> Maybe b) -> (b -> IO a) -> IO a -> IO a
- tryJust_ :: (SomeException -> Maybe b) -> IO a -> IO (Either b a)
- catchBool :: Exception e => (e -> Bool) -> IO a -> (e -> IO a) -> IO a
- handleBool :: Exception e => (e -> Bool) -> (e -> IO a) -> IO a -> IO a
- tryBool :: Exception e => (e -> Bool) -> IO a -> IO (Either e a)
- whenJust :: Applicative m => Maybe a -> (a -> m ()) -> m ()
- whenJustM :: Monad m => m (Maybe a) -> (a -> m ()) -> m ()
- pureIf :: Alternative m => Bool -> a -> m a
- whenMaybe :: Applicative m => Bool -> m a -> m (Maybe a)
- whenMaybeM :: Monad m => m Bool -> m a -> m (Maybe a)
- unit :: m () -> m ()
- maybeM :: Monad m => m b -> (a -> m b) -> m (Maybe a) -> m b
- fromMaybeM :: Monad m => m a -> m (Maybe a) -> m a
- eitherM :: Monad m => (a -> m c) -> (b -> m c) -> m (Either a b) -> m c
- loop :: (a -> Either a b) -> a -> b
- loopM :: Monad m => (a -> m (Either a b)) -> a -> m b
- whileM :: Monad m => m Bool -> m ()
- whileJustM :: (Monad m, Monoid a) => m (Maybe a) -> m a
- untilJustM :: Monad m => m (Maybe a) -> m a
- partitionM :: Monad m => (a -> m Bool) -> [a] -> m ([a], [a])
- concatMapM :: Monad m => (a -> m [b]) -> [a] -> m [b]
- concatForM :: Monad m => [a] -> (a -> m [b]) -> m [b]
- mconcatMapM :: (Monad m, Monoid b) => (a -> m b) -> [a] -> m b
- mapMaybeM :: Monad m => (a -> m (Maybe b)) -> [a] -> m [b]
- findM :: Monad m => (a -> m Bool) -> [a] -> m (Maybe a)
- firstJustM :: Monad m => (a -> m (Maybe b)) -> [a] -> m (Maybe b)
- fold1M :: (Partial, Monad m) => (a -> a -> m a) -> [a] -> m a
- fold1M_ :: (Partial, Monad m) => (a -> a -> m a) -> [a] -> m ()
- whenM :: Monad m => m Bool -> m () -> m ()
- unlessM :: Monad m => m Bool -> m () -> m ()
- ifM :: Monad m => m Bool -> m a -> m a -> m a
- notM :: Functor m => m Bool -> m Bool
- (||^) :: Monad m => m Bool -> m Bool -> m Bool
- (&&^) :: Monad m => m Bool -> m Bool -> m Bool
- orM :: Monad m => [m Bool] -> m Bool
- andM :: Monad m => [m Bool] -> m Bool
- anyM :: Monad m => (a -> m Bool) -> [a] -> m Bool
- allM :: Monad m => (a -> m Bool) -> [a] -> m Bool
- fromLeft :: a -> Either a b -> a
- fromRight :: b -> Either a b -> b
- fromEither :: Either a a -> a
- fromLeft' :: Partial => Either l r -> l
- fromRight' :: Partial => Either l r -> r
- eitherToMaybe :: Either a b -> Maybe b
- maybeToEither :: a -> Maybe b -> Either a b
- mapLeft :: (a -> c) -> Either a b -> Either c b
- mapRight :: (b -> c) -> Either a b -> Either a c
- writeIORef' :: IORef a -> a -> IO ()
- atomicWriteIORef' :: IORef a -> a -> IO ()
- atomicModifyIORef_ :: IORef a -> (a -> a) -> IO ()
- atomicModifyIORef'_ :: IORef a -> (a -> a) -> IO ()
- lower :: String -> String
- upper :: String -> String
- trim :: String -> String
- trimStart :: String -> String
- trimEnd :: String -> String
- word1 :: String -> (String, String)
- line1 :: String -> (String, String)
- escapeHTML :: String -> String
- escapeJSON :: String -> String
- unescapeHTML :: String -> String
- unescapeJSON :: String -> String
- dropEnd :: Int -> [a] -> [a]
- takeEnd :: Int -> [a] -> [a]
- splitAtEnd :: Int -> [a] -> ([a], [a])
- breakEnd :: (a -> Bool) -> [a] -> ([a], [a])
- spanEnd :: (a -> Bool) -> [a] -> ([a], [a])
- dropWhileEnd' :: (a -> Bool) -> [a] -> [a]
- takeWhileEnd :: (a -> Bool) -> [a] -> [a]
- stripSuffix :: Eq a => [a] -> [a] -> Maybe [a]
- stripInfix :: Eq a => [a] -> [a] -> Maybe ([a], [a])
- stripInfixEnd :: Eq a => [a] -> [a] -> Maybe ([a], [a])
- dropPrefix :: Eq a => [a] -> [a] -> [a]
- dropSuffix :: Eq a => [a] -> [a] -> [a]
- wordsBy :: (a -> Bool) -> [a] -> [[a]]
- linesBy :: (a -> Bool) -> [a] -> [[a]]
- breakOn :: Eq a => [a] -> [a] -> ([a], [a])
- breakOnEnd :: Eq a => [a] -> [a] -> ([a], [a])
- splitOn :: (Partial, Eq a) => [a] -> [a] -> [[a]]
- split :: (a -> Bool) -> [a] -> [[a]]
- chunksOf :: Partial => Int -> [a] -> [[a]]
- headDef :: a -> [a] -> a
- lastDef :: a -> [a] -> a
- (!?) :: [a] -> Int -> Maybe a
- notNull :: [a] -> Bool
- list :: b -> (a -> [a] -> b) -> [a] -> b
- unsnoc :: [a] -> Maybe ([a], a)
- cons :: a -> [a] -> [a]
- snoc :: [a] -> a -> [a]
- drop1 :: [a] -> [a]
- dropEnd1 :: [a] -> [a]
- mconcatMap :: Monoid b => (a -> b) -> [a] -> b
- compareLength :: (Ord b, Num b, Foldable f) => f a -> b -> Ordering
- comparingLength :: (Foldable f1, Foldable f2) => f1 a -> f2 b -> Ordering
- enumerate :: (Enum a, Bounded a) => [a]
- groupSort :: Ord k => [(k, v)] -> [(k, [v])]
- groupSortOn :: Ord b => (a -> b) -> [a] -> [[a]]
- groupSortBy :: (a -> a -> Ordering) -> [a] -> [[a]]
- nubOrd :: Ord a => [a] -> [a]
- nubOrdBy :: (a -> a -> Ordering) -> [a] -> [a]
- nubOrdOn :: Ord b => (a -> b) -> [a] -> [a]
- nubOn :: Eq b => (a -> b) -> [a] -> [a]
- groupOn :: Eq k => (a -> k) -> [a] -> [[a]]
- groupOnKey :: Eq k => (a -> k) -> [a] -> [(k, [a])]
- nubSort :: Ord a => [a] -> [a]
- nubSortBy :: (a -> a -> Ordering) -> [a] -> [a]
- nubSortOn :: Ord b => (a -> b) -> [a] -> [a]
- maximumOn :: (Partial, Ord b) => (a -> b) -> [a] -> a
- minimumOn :: (Partial, Ord b) => (a -> b) -> [a] -> a
- sum' :: Num a => [a] -> a
- product' :: Num a => [a] -> a
- sumOn' :: Num b => (a -> b) -> [a] -> b
- productOn' :: Num b => (a -> b) -> [a] -> b
- disjoint :: Eq a => [a] -> [a] -> Bool
- disjointOrd :: Ord a => [a] -> [a] -> Bool
- disjointOrdBy :: (a -> a -> Ordering) -> [a] -> [a] -> Bool
- allSame :: Eq a => [a] -> Bool
- anySame :: Eq a => [a] -> Bool
- repeatedly :: ([a] -> (b, [a])) -> [a] -> [b]
- repeatedlyNE :: (NonEmpty a -> (b, [a])) -> [a] -> [b]
- firstJust :: (a -> Maybe b) -> [a] -> Maybe b
- concatUnzip :: [([a], [b])] -> ([a], [b])
- concatUnzip3 :: [([a], [b], [c])] -> ([a], [b], [c])
- zipFrom :: Enum a => a -> [b] -> [(a, b)]
- zipWithFrom :: Enum a => (a -> b -> c) -> a -> [b] -> [c]
- zipWithLongest :: (Maybe a -> Maybe b -> c) -> [a] -> [b] -> [c]
- replace :: Eq a => [a] -> [a] -> [a] -> [a]
- merge :: Ord a => [a] -> [a] -> [a]
- mergeBy :: (a -> a -> Ordering) -> [a] -> [a] -> [a]
- (|:) :: [a] -> a -> NonEmpty a
- (|>) :: NonEmpty a -> a -> NonEmpty a
- appendl :: NonEmpty a -> [a] -> NonEmpty a
- appendr :: [a] -> NonEmpty a -> NonEmpty a
- maximum1 :: Ord a => NonEmpty a -> a
- minimum1 :: Ord a => NonEmpty a -> a
- maximumBy1 :: (a -> a -> Ordering) -> NonEmpty a -> a
- minimumBy1 :: (a -> a -> Ordering) -> NonEmpty a -> a
- maximumOn1 :: Ord b => (a -> b) -> NonEmpty a -> a
- minimumOn1 :: Ord b => (a -> b) -> NonEmpty a -> a
- mwhen :: Monoid a => Bool -> a -> a
- first :: (a -> a') -> (a, b) -> (a', b)
- second :: (b -> b') -> (a, b) -> (a, b')
- (***) :: (a -> a') -> (b -> b') -> (a, b) -> (a', b')
- (&&&) :: (a -> b) -> (a -> c) -> a -> (b, c)
- dupe :: a -> (a, a)
- both :: (a -> b) -> (a, a) -> (b, b)
- firstM :: Functor m => (a -> m a') -> (a, b) -> m (a', b)
- secondM :: Functor m => (b -> m b') -> (a, b) -> m (a, b')
- fst3 :: (a, b, c) -> a
- snd3 :: (a, b, c) -> b
- thd3 :: (a, b, c) -> c
- first3 :: (a -> a') -> (a, b, c) -> (a', b, c)
- second3 :: (b -> b') -> (a, b, c) -> (a, b', c)
- third3 :: (c -> c') -> (a, b, c) -> (a, b, c')
- curry3 :: ((a, b, c) -> d) -> a -> b -> c -> d
- uncurry3 :: (a -> b -> c -> d) -> (a, b, c) -> d
- readVersion :: Partial => String -> Version
- showDP :: RealFloat a => Int -> a -> String
- intToDouble :: Int -> Double
- intToFloat :: Int -> Float
- floatToDouble :: Float -> Double
- doubleToFloat :: Double -> Float
- withCurrentDirectory :: FilePath -> IO a -> IO a
- createDirectoryPrivate :: String -> IO ()
- listContents :: FilePath -> IO [FilePath]
- listDirectories :: FilePath -> IO [FilePath]
- listFiles :: FilePath -> IO [FilePath]
- listFilesInside :: (FilePath -> IO Bool) -> FilePath -> IO [FilePath]
- listFilesRecursive :: FilePath -> IO [FilePath]
- isWindows :: Bool
- isMac :: Bool
- captureOutput :: IO a -> IO (String, a)
- withBuffering :: Handle -> BufferMode -> IO a -> IO a
- readFileEncoding :: TextEncoding -> FilePath -> IO String
- readFileUTF8 :: FilePath -> IO String
- readFileBinary :: FilePath -> IO String
- readFile' :: FilePath -> IO String
- readFileEncoding' :: TextEncoding -> FilePath -> IO String
- readFileUTF8' :: FilePath -> IO String
- readFileBinary' :: FilePath -> IO String
- writeFileEncoding :: TextEncoding -> FilePath -> String -> IO ()
- writeFileUTF8 :: FilePath -> String -> IO ()
- writeFileBinary :: FilePath -> String -> IO ()
- withTempFile :: (FilePath -> IO a) -> IO a
- withTempDir :: (FilePath -> IO a) -> IO a
- newTempFile :: IO (FilePath, IO ())
- newTempDir :: IO (FilePath, IO ())
- newTempFileWithin :: FilePath -> IO (FilePath, IO ())
- newTempDirWithin :: FilePath -> IO (FilePath, IO ())
- fileEq :: FilePath -> FilePath -> IO Bool
- system_ :: Partial => String -> IO ()
- systemOutput :: String -> IO (ExitCode, String)
- systemOutput_ :: Partial => String -> IO String
- type Seconds = Double
- sleep :: Seconds -> IO ()
- timeout :: Seconds -> IO a -> IO (Maybe a)
- showDuration :: Seconds -> String
- offsetTime :: IO (IO Seconds)
- offsetTimeIncrease :: IO (IO Seconds)
- duration :: MonadIO m => m a -> m (Seconds, a)

# Control.Concurrent.Extra

Extra functions available in `Control.Concurrent.Extra`

.

withNumCapabilities :: Int -> IO a -> IO a Source #

On GHC 7.6 and above with the `-threaded`

flag, brackets a call to `setNumCapabilities`

.
On lower versions (which lack `setNumCapabilities`

) this function just runs the argument action.

once :: IO a -> IO (IO a) Source #

Given an action, produce a wrapped action that runs at most once. If the function raises an exception, the same exception will be reraised each time.

let x ||| y = do t1 <- onceFork x; t2 <- onceFork y; t1; t2 \(x :: IO Int) -> void (once x) == pure () \(x :: IO Int) -> join (once x) == x \(x :: IO Int) -> (do y <- once x; y; y) == x \(x :: IO Int) -> (do y <- once x; y ||| y) == x

onceFork :: IO a -> IO (IO a) Source #

Like `once`

, but immediately starts running the computation on a background thread.

\(x :: IO Int) -> join (onceFork x) == x \(x :: IO Int) -> (do a <- onceFork x; a; a) == x

Like an `MVar`

, but has no value.
Used to guarantee single-threaded access, typically to some system resource.
As an example:

lock <-`newLock`

let output =`withLock`

lock . putStrLn forkIO $ do ...; output "hello" forkIO $ do ...; output "world"

Here we are creating a lock to ensure that when writing output our messages
do not get interleaved. This use of `MVar`

never blocks on a put. It is permissible,
but rare, that a withLock contains a withLock inside it - but if so,
watch out for deadlocks.

Like an `MVar`

, but must always be full.
Used to operate on a mutable variable in a thread-safe way.
As an example:

hits <-`newVar`

0 forkIO $ do ...;`modifyVar_`

hits (+1); ... i <-`readVar`

hits print ("HITS",i)

Here we have a variable which we modify atomically, so modifications are
not interleaved. This use of `MVar`

never blocks on a put. No modifyVar
operation should ever block, and they should always complete in a reasonable
timeframe. A `Var`

should not be used to protect some external resource, only
the variable contained within. Information from a `readVar`

should not be subsequently
inserted back into the `Var`

.

modifyVar :: Var a -> (a -> IO (a, b)) -> IO b Source #

Modify a `Var`

producing a new value and a return result.

modifyVar' :: Var a -> (a -> IO (a, b)) -> IO b Source #

Strict variant of `modifyVar'`

modifyVar_' :: Var a -> (a -> IO a) -> IO () Source #

Strict variant of `modifyVar_`

Starts out empty, then is filled exactly once. As an example:

bar <-`newBarrier`

forkIO $ do ...; val <- ...;`signalBarrier`

bar val print =<<`waitBarrier`

bar

Here we create a barrier which will contain some computed value. A thread is forked to fill the barrier, while the main thread waits for it to complete. A barrier has similarities to a future or promise from other languages, has been known as an IVar in other Haskell work, and in some ways is like a manually managed thunk.

signalBarrier :: Partial => Barrier a -> a -> IO () Source #

Write a value into the Barrier, releasing anyone at `waitBarrier`

.
Any subsequent attempts to signal the `Barrier`

will throw an exception.

waitBarrier :: Barrier a -> IO a Source #

Wait until a barrier has been signaled with `signalBarrier`

.

waitBarrierMaybe :: Barrier a -> IO (Maybe a) Source #

A version of `waitBarrier`

that never blocks, returning `Nothing`

if the barrier has not yet been signaled.

# Control.Exception.Extra

Extra functions available in `Control.Exception.Extra`

.

type Partial = HasCallStack Source #

A constraint which documents that a function is partial, and on GHC 8.0 and above produces a stack trace on failure. For example:

`myHead :: ``Partial`

=> [a] -> a
myHead [] = error "bad"
myHead (x:xs) = x

When using `Partial`

with GHC 7.8 or below you need to enable the
language feature `ConstraintKinds`

, e.g. `{-# LANGUAGE ConstraintKinds #-}`

at the top of the file.

retry :: Int -> IO a -> IO a Source #

Retry an operation at most *n* times (*n* must be positive).
If the operation fails the *n*th time it will throw that final exception.

retry 1 (print "x") == print "x" retry 3 (fail "die") == fail "die"

retryBool :: Exception e => (e -> Bool) -> Int -> IO a -> IO a Source #

Retry an operation at most *n* times (*n* must be positive), while the exception value and type match a predicate.
If the operation fails the *n*th time it will throw that final exception.

errorWithoutStackTrace :: forall (r :: RuntimeRep) (a :: TYPE r). [Char] -> a #

A variant of `error`

that does not produce a stack trace.

*Since: base-4.9.0.0*

showException :: Show e => e -> IO String Source #

Show a value, but if the result contains exceptions, produce
`<Exception>`

. Defined as

.
Particularly useful for printing exceptions to users, remembering that exceptions
can themselves contain undefined values.`stringException`

. show

stringException :: String -> IO String Source #

Fully evaluate an input String. If the String contains embedded exceptions it will produce `<Exception>`

.

stringException "test" == pure "test" stringException ("test" ++ undefined) == pure "test<Exception>" stringException ("test" ++ undefined ++ "hello") == pure "test<Exception>" stringException ['t','e','s','t',undefined] == pure "test<Exception>"

assertIO :: Partial => Bool -> IO () Source #

An `IO`

action that when evaluated calls `assert`

in the `IO`

monad, which throws an `AssertionFailed`

exception if the argument is `False`

.
With optimizations enabled (and `-fgnore-asserts`

) this function ignores its argument and does nothing.

catch (assertIO True >> pure 1) (\(x :: AssertionFailed) -> pure 2) == pure 1 seq (assertIO False) (print 1) == print 1

ignore :: IO () -> IO () Source #

Ignore any exceptions thrown by the action.

ignore (print 1) == print 1 ignore (fail "die") == pure ()

catch_ :: IO a -> (SomeException -> IO a) -> IO a Source #

A version of `catch`

without the `Exception`

context, restricted to `SomeException`

,
so catches all exceptions.

catchJust_ :: (SomeException -> Maybe b) -> IO a -> (b -> IO a) -> IO a Source #

handleJust_ :: (SomeException -> Maybe b) -> (b -> IO a) -> IO a -> IO a Source #

Like `catch_`

but for `handleJust`

catchBool :: Exception e => (e -> Bool) -> IO a -> (e -> IO a) -> IO a Source #

Catch an exception if the predicate passes, then call the handler with the original exception. As an example:

readFileExists x == catchBool isDoesNotExistError (readFile "myfile") (const $ pure "")

# Control.Monad.Extra

Extra functions available in `Control.Monad.Extra`

.

whenJust :: Applicative m => Maybe a -> (a -> m ()) -> m () Source #

whenJustM :: Monad m => m (Maybe a) -> (a -> m ()) -> m () Source #

Like `whenJust`

, but where the test can be monadic.

pureIf :: Alternative m => Bool -> a -> m a Source #

whenMaybeM :: Monad m => m Bool -> m a -> m (Maybe a) Source #

Like `whenMaybe`

, but where the test can be monadic.

The identity function which requires the inner argument to be `()`

. Useful for functions
with overloaded return types.

\(x :: Maybe ()) -> unit x == x

maybeM :: Monad m => m b -> (a -> m b) -> m (Maybe a) -> m b Source #

Monadic generalisation of `maybe`

.

eitherM :: Monad m => (a -> m c) -> (b -> m c) -> m (Either a b) -> m c Source #

Monadic generalisation of `either`

.

untilJustM :: Monad m => m (Maybe a) -> m a Source #

partitionM :: Monad m => (a -> m Bool) -> [a] -> m ([a], [a]) Source #

A version of `partition`

that works with a monadic predicate.

partitionM (Just . even) [1,2,3] == Just ([2], [1,3]) partitionM (const Nothing) [1,2,3] == Nothing

concatMapM :: Monad m => (a -> m [b]) -> [a] -> m [b] Source #

A version of `concatMap`

that works with a monadic predicate.

concatForM :: Monad m => [a] -> (a -> m [b]) -> m [b] Source #

Like `concatMapM`

, but has its arguments flipped, so can be used
instead of the common `fmap concat $ forM`

pattern.

mconcatMapM :: (Monad m, Monoid b) => (a -> m b) -> [a] -> m b Source #

A version of `mconcatMap`

that works with a monadic predicate.

mapMaybeM :: Monad m => (a -> m (Maybe b)) -> [a] -> m [b] Source #

A version of `mapMaybe`

that works with a monadic predicate.

findM :: Monad m => (a -> m Bool) -> [a] -> m (Maybe a) Source #

Like `find`

, but where the test can be monadic.

findM (Just . isUpper) "teST" == Just (Just 'S') findM (Just . isUpper) "test" == Just Nothing findM (Just . const True) ["x",undefined] == Just (Just "x")

firstJustM :: Monad m => (a -> m (Maybe b)) -> [a] -> m (Maybe b) Source #

Like `findM`

, but also allows you to compute some additional information in the predicate.

fold1M :: (Partial, Monad m) => (a -> a -> m a) -> [a] -> m a Source #

A variant of `foldM`

that has no base case, and thus may only be applied to non-empty lists.

fold1M (\x y -> Just x) [] == undefined fold1M (\x y -> Just $ x + y) [1, 2, 3] == Just 6

fold1M_ :: (Partial, Monad m) => (a -> a -> m a) -> [a] -> m () Source #

Like `fold1M`

but discards the result.

unlessM :: Monad m => m Bool -> m () -> m () Source #

Like `unless`

, but where the test can be monadic.

orM :: Monad m => [m Bool] -> m Bool Source #

A version of `or`

lifted to a monad. Retains the short-circuiting behaviour.

orM [Just False,Just True ,undefined] == Just True orM [Just False,Just False,undefined] == undefined \xs -> Just (or xs) == orM (map Just xs)

andM :: Monad m => [m Bool] -> m Bool Source #

A version of `and`

lifted to a monad. Retains the short-circuiting behaviour.

andM [Just True,Just False,undefined] == Just False andM [Just True,Just True ,undefined] == undefined \xs -> Just (and xs) == andM (map Just xs)

anyM :: Monad m => (a -> m Bool) -> [a] -> m Bool Source #

A version of `any`

lifted to a monad. Retains the short-circuiting behaviour.

anyM Just [False,True ,undefined] == Just True anyM Just [False,False,undefined] == undefined \(f :: Int -> Maybe Bool) xs -> anyM f xs == orM (map f xs)

allM :: Monad m => (a -> m Bool) -> [a] -> m Bool Source #

A version of `all`

lifted to a monad. Retains the short-circuiting behaviour.

allM Just [True,False,undefined] == Just False allM Just [True,True ,undefined] == undefined \(f :: Int -> Maybe Bool) xs -> anyM f xs == orM (map f xs)

# Data.Either.Extra

Extra functions available in `Data.Either.Extra`

.

fromLeft :: a -> Either a b -> a #

Return the contents of a `Left`

-value or a default value otherwise.

#### Examples

Basic usage:

`>>>`

3`fromLeft 1 (Left 3)`

`>>>`

1`fromLeft 1 (Right "foo")`

*Since: base-4.10.0.0*

fromRight :: b -> Either a b -> b #

Return the contents of a `Right`

-value or a default value otherwise.

#### Examples

Basic usage:

`>>>`

3`fromRight 1 (Right 3)`

`>>>`

1`fromRight 1 (Left "foo")`

*Since: base-4.10.0.0*

fromEither :: Either a a -> a Source #

Pull the value out of an `Either`

where both alternatives
have the same type.

\x -> fromEither (Left x ) == x \x -> fromEither (Right x) == x

fromRight' :: Partial => Either l r -> r Source #

The `fromRight'`

function extracts the element out of a `Right`

and
throws an error if its argument is `Left`

.
Much like `fromJust`

, using this function in polished code is usually a bad idea.

\x -> fromRight' (Right x) == x \x -> fromRight' (Left x) == undefined

eitherToMaybe :: Either a b -> Maybe b Source #

maybeToEither :: a -> Maybe b -> Either a b Source #

# Data.IORef.Extra

Extra functions available in `Data.IORef.Extra`

.

writeIORef' :: IORef a -> a -> IO () Source #

Evaluates the value before calling `writeIORef`

.

atomicWriteIORef' :: IORef a -> a -> IO () Source #

Evaluates the value before calling `atomicWriteIORef`

.

atomicModifyIORef_ :: IORef a -> (a -> a) -> IO () Source #

Variant of `atomicModifyIORef`

which ignores the return value

atomicModifyIORef'_ :: IORef a -> (a -> a) -> IO () Source #

Variant of `atomicModifyIORef'`

which ignores the return value

# Data.List.Extra

Extra functions available in `Data.List.Extra`

.

lower :: String -> String Source #

Convert a string to lower case.

lower "This is A TEST" == "this is a test" lower "" == ""

upper :: String -> String Source #

Convert a string to upper case.

upper "This is A TEST" == "THIS IS A TEST" upper "" == ""

word1 :: String -> (String, String) Source #

Split the first word off a string. Useful for when starting to parse the beginning of a string, but you want to accurately preserve whitespace in the rest of the string.

word1 "" == ("", "") word1 "keyword rest of string" == ("keyword","rest of string") word1 " keyword\n rest of string" == ("keyword","rest of string") \s -> fst (word1 s) == concat (take 1 $ words s) \s -> words (snd $ word1 s) == drop 1 (words s)

line1 :: String -> (String, String) Source #

Split the first line off a string.

line1 "" == ("", "") line1 "test" == ("test","") line1 "test\n" == ("test","") line1 "test\nrest" == ("test","rest") line1 "test\nrest\nmore" == ("test","rest\nmore")

escapeHTML :: String -> String Source #

Escape a string such that it can be inserted into an HTML document or `"`

attribute
without any special interpretation. This requires escaping the `<`

, `>`

, `&`

and `"`

characters.
Note that it will escape `"`

and `'`

even though that is not required in an HTML body (but is not harmful).

escapeHTML "this is a test" == "this is a test" escapeHTML "<b>\"g&t\"</n>" == "<b>"g&t"</n>" escapeHTML "t'was another test" == "t'was another test"

escapeJSON :: String -> String Source #

Escape a string so it can form part of a JSON literal.
This requires escaping the special whitespace and control characters. Additionally,
Note that it does *not* add quote characters around the string.

escapeJSON "this is a test" == "this is a test" escapeJSON "\ttab\nnewline\\" == "\\ttab\\nnewline\\\\" escapeJSON "\ESC[0mHello" == "\\u001b[0mHello"

unescapeHTML :: String -> String Source #

Invert of `escapeHTML`

(does not do general HTML unescaping)

\xs -> unescapeHTML (escapeHTML xs) == xs

unescapeJSON :: String -> String Source #

General JSON unescaping, inversion of `escapeJSON`

and all other JSON escapes.

\xs -> unescapeJSON (escapeJSON xs) == xs

dropEnd :: Int -> [a] -> [a] Source #

Drop a number of elements from the end of the list.

dropEnd 3 "hello" == "he" dropEnd 5 "bye" == "" dropEnd (-1) "bye" == "bye" \i xs -> dropEnd i xs `isPrefixOf` xs \i xs -> length (dropEnd i xs) == max 0 (length xs - max 0 i) \i -> take 3 (dropEnd 5 [i..]) == take 3 [i..]

takeEnd :: Int -> [a] -> [a] Source #

Take a number of elements from the end of the list.

takeEnd 3 "hello" == "llo" takeEnd 5 "bye" == "bye" takeEnd (-1) "bye" == "" \i xs -> takeEnd i xs `isSuffixOf` xs \i xs -> length (takeEnd i xs) == min (max 0 i) (length xs)

splitAtEnd :: Int -> [a] -> ([a], [a]) Source #

returns a split where the second element tries to
contain `splitAtEnd`

n xs`n`

elements.

splitAtEnd 3 "hello" == ("he","llo") splitAtEnd 3 "he" == ("", "he") \i xs -> uncurry (++) (splitAt i xs) == xs \i xs -> splitAtEnd i xs == (dropEnd i xs, takeEnd i xs)

breakEnd :: (a -> Bool) -> [a] -> ([a], [a]) Source #

Break, but from the end.

breakEnd isLower "youRE" == ("you","RE") breakEnd isLower "youre" == ("youre","") breakEnd isLower "YOURE" == ("","YOURE") \f xs -> breakEnd (not . f) xs == spanEnd f xs

spanEnd :: (a -> Bool) -> [a] -> ([a], [a]) Source #

Span, but from the end.

spanEnd isUpper "youRE" == ("you","RE") spanEnd (not . isSpace) "x y z" == ("x y ","z") \f xs -> uncurry (++) (spanEnd f xs) == xs \f xs -> spanEnd f xs == swap (both reverse (span f (reverse xs)))

dropWhileEnd' :: (a -> Bool) -> [a] -> [a] Source #

A version of `dropWhileEnd`

but with different strictness properties.
The function `dropWhileEnd`

can be used on an infinite list and tests the property
on each character. In contrast, `dropWhileEnd'`

is strict in the spine of the list
but only tests the trailing suffix.
This version usually outperforms `dropWhileEnd`

if the list is short or the test is expensive.
Note the tests below cover both the prime and non-prime variants.

dropWhileEnd isSpace "ab cde " == "ab cde" dropWhileEnd' isSpace "ab cde " == "ab cde" last (dropWhileEnd even [undefined,3]) == undefined last (dropWhileEnd' even [undefined,3]) == 3 head (dropWhileEnd even (3:undefined)) == 3 head (dropWhileEnd' even (3:undefined)) == undefined

takeWhileEnd :: (a -> Bool) -> [a] -> [a] Source #

A version of `takeWhile`

operating from the end.

takeWhileEnd even [2,3,4,6] == [4,6]

stripSuffix :: Eq a => [a] -> [a] -> Maybe [a] Source #

Return the prefix of the second list if its suffix matches the entire first list.

Examples:

stripSuffix "bar" "foobar" == Just "foo" stripSuffix "" "baz" == Just "baz" stripSuffix "foo" "quux" == Nothing

stripInfix :: Eq a => [a] -> [a] -> Maybe ([a], [a]) Source #

Return the the string before and after the search string,
or `Nothing`

if the search string is not present.

Examples:

stripInfix "::" "a::b::c" == Just ("a", "b::c") stripInfix "/" "foobar" == Nothing

stripInfixEnd :: Eq a => [a] -> [a] -> Maybe ([a], [a]) Source #

Similar to `stripInfix`

, but searches from the end of the
string.

stripInfixEnd "::" "a::b::c" == Just ("a::b", "c")

dropPrefix :: Eq a => [a] -> [a] -> [a] Source #

Drops the given prefix from a list. It returns the original sequence if the sequence doesn't start with the given prefix.

dropPrefix "Mr. " "Mr. Men" == "Men" dropPrefix "Mr. " "Dr. Men" == "Dr. Men"

dropSuffix :: Eq a => [a] -> [a] -> [a] Source #

Drops the given suffix from a list. It returns the original sequence if the sequence doesn't end with the given suffix.

dropSuffix "!" "Hello World!" == "Hello World" dropSuffix "!" "Hello World!!" == "Hello World!" dropSuffix "!" "Hello World." == "Hello World."

wordsBy :: (a -> Bool) -> [a] -> [[a]] Source #

A variant of `words`

with a custom test. In particular,
adjacent separators are discarded, as are leading or trailing separators.

wordsBy (== ':') "::xyz:abc::123::" == ["xyz","abc","123"] \s -> wordsBy isSpace s == words s

linesBy :: (a -> Bool) -> [a] -> [[a]] Source #

A variant of `lines`

with a custom test. In particular,
if there is a trailing separator it will be discarded.

linesBy (== ':') "::xyz:abc::123::" == ["","","xyz","abc","","123",""] \s -> linesBy (== '\n') s == lines s linesBy (== ';') "my;list;here;" == ["my","list","here"]

breakOn :: Eq a => [a] -> [a] -> ([a], [a]) Source #

Find the first instance of `needle`

in `haystack`

.
The first element of the returned tuple
is the prefix of `haystack`

before `needle`

is matched. The second
is the remainder of `haystack`

, starting with the match.
If you want the remainder *without* the match, use `stripInfix`

.

breakOn "::" "a::b::c" == ("a", "::b::c") breakOn "/" "foobar" == ("foobar", "") \needle haystack -> let (prefix,match) = breakOn needle haystack in prefix ++ match == haystack

breakOnEnd :: Eq a => [a] -> [a] -> ([a], [a]) Source #

Similar to `breakOn`

, but searches from the end of the
string.

The first element of the returned tuple is the prefix of `haystack`

up to and including the last match of `needle`

. The second is the
remainder of `haystack`

, following the match.

breakOnEnd "::" "a::b::c" == ("a::b::", "c")

splitOn :: (Partial, Eq a) => [a] -> [a] -> [[a]] Source #

Break a list into pieces separated by the first list argument, consuming the delimiter. An empty delimiter is invalid, and will cause an error to be raised.

splitOn "\r\n" "a\r\nb\r\nd\r\ne" == ["a","b","d","e"] splitOn "aaa" "aaaXaaaXaaaXaaa" == ["","X","X","X",""] splitOn "x" "x" == ["",""] splitOn "x" "" == [""] \s x -> s /= "" ==> intercalate s (splitOn s x) == x \c x -> splitOn [c] x == split (==c) x

split :: (a -> Bool) -> [a] -> [[a]] Source #

Splits a list into components delimited by separators, where the predicate returns True for a separator element. The resulting components do not contain the separators. Two adjacent separators result in an empty component in the output.

split (== 'a') "aabbaca" == ["","","bb","c",""] split (== 'a') "" == [""] split (== ':') "::xyz:abc::123::" == ["","","xyz","abc","","123","",""] split (== ',') "my,list,here" == ["my","list","here"]

chunksOf :: Partial => Int -> [a] -> [[a]] Source #

Split a list into chunks of a given size. The last chunk may contain fewer than n elements. The chunk size must be positive.

chunksOf 3 "my test" == ["my ","tes","t"] chunksOf 3 "mytest" == ["myt","est"] chunksOf 8 "" == [] chunksOf 0 "test" == undefined

headDef :: a -> [a] -> a Source #

A total `head`

with a default value.

headDef 1 [] == 1 headDef 1 [2,3,4] == 2 \x xs -> headDef x xs == fromMaybe x (listToMaybe xs)

lastDef :: a -> [a] -> a Source #

A total `last`

with a default value.

lastDef 1 [] == 1 lastDef 1 [2,3,4] == 4 \x xs -> lastDef x xs == last (x:xs)

(!?) :: [a] -> Int -> Maybe a Source #

A total variant of the list index function `(!!)`

.

[2,3,4] !? 1 == Just 3 [2,3,4] !? (-1) == Nothing [] !? 0 == Nothing

list :: b -> (a -> [a] -> b) -> [a] -> b Source #

Non-recursive transform over a list, like `maybe`

.

list 1 (\v _ -> v - 2) [5,6,7] == 3 list 1 (\v _ -> v - 2) [] == 1 \nil cons xs -> maybe nil (uncurry cons) (uncons xs) == list nil cons xs

cons :: a -> [a] -> [a] Source #

Append an element to the start of a list, an alias for `(:)`

.

cons 't' "est" == "test" \x xs -> uncons (cons x xs) == Just (x,xs)

snoc :: [a] -> a -> [a] Source #

Append an element to the end of a list, takes *O(n)* time.

snoc "tes" 't' == "test" \xs x -> unsnoc (snoc xs x) == Just (xs,x)

Equivalent to `drop 1`

, but likely to be faster and a single lexeme.

drop1 "" == "" drop1 "test" == "est" \xs -> drop 1 xs == drop1 xs

dropEnd1 :: [a] -> [a] Source #

Equivalent to `dropEnd 1`

, but likely to be faster and a single lexeme.

dropEnd1 "" == "" dropEnd1 "test" == "tes" \xs -> dropEnd 1 xs == dropEnd1 xs

mconcatMap :: Monoid b => (a -> b) -> [a] -> b Source #

compareLength :: (Ord b, Num b, Foldable f) => f a -> b -> Ordering Source #

Lazily compare the length of a `Foldable`

with a number.

compareLength [1,2,3] 1 == GT compareLength [1,2] 2 == EQ \(xs :: [Int]) n -> compareLength xs n == compare (length xs) n compareLength (1:2:3:undefined) 2 == GT

groupSortOn :: Ord b => (a -> b) -> [a] -> [[a]] Source #

groupSortBy :: (a -> a -> Ordering) -> [a] -> [[a]] Source #

nubOrd :: Ord a => [a] -> [a] Source #

*O(n log n)*. The `nubOrd`

function removes duplicate elements from a list.
In particular, it keeps only the first occurrence of each element.
Unlike the standard `nub`

operator, this version requires an `Ord`

instance
and consequently runs asymptotically faster.

nubOrd "this is a test" == "this ae" nubOrd (take 4 ("this" ++ undefined)) == "this" \xs -> nubOrd xs == nub xs

nubOrdBy :: (a -> a -> Ordering) -> [a] -> [a] Source #

A version of `nubOrd`

with a custom predicate.

nubOrdBy (compare `on` length) ["a","test","of","this"] == ["a","test","of"]

nubOrdOn :: Ord b => (a -> b) -> [a] -> [a] Source #

A version of `nubOrd`

which operates on a portion of the value.

nubOrdOn length ["a","test","of","this"] == ["a","test","of"]

nubOn :: Eq b => (a -> b) -> [a] -> [a] Source #

Deprecated: Use nubOrdOn, since this function is O(n^2)

*DEPRECATED* Use `nubOrdOn`

, since this function is _O(n^2)_.

A version of `nub`

where the equality is done on some extracted value.
`nubOn f`

is equivalent to `nubBy ((==) `

, but has the
performance advantage of only evaluating `on`

f)`f`

once for each element in the
input list.

groupOn :: Eq k => (a -> k) -> [a] -> [[a]] Source #

A version of `group`

where the equality is done on some extracted value.

groupOn abs [1,-1,2] == [[1,-1], [2]]

groupOnKey :: Eq k => (a -> k) -> [a] -> [(k, [a])] Source #

A version of `groupOn`

which pairs each group with its "key" - the
extracted value used for equality testing.

groupOnKey abs [1,-1,2] == [(1, [1,-1]), (2, [2])]

nubSort :: Ord a => [a] -> [a] Source #

*O(n log n)*. The `nubSort`

function sorts and removes duplicate elements from a list.
In particular, it keeps only the first occurrence of each element.

nubSort "this is a test" == " aehist" \xs -> nubSort xs == nub (sort xs)

nubSortBy :: (a -> a -> Ordering) -> [a] -> [a] Source #

A version of `nubSort`

with a custom predicate.

nubSortBy (compare `on` length) ["a","test","of","this"] == ["a","of","test"]

nubSortOn :: Ord b => (a -> b) -> [a] -> [a] Source #

A version of `nubSort`

which operates on a portion of the value.

nubSortOn length ["a","test","of","this"] == ["a","of","test"]

maximumOn :: (Partial, Ord b) => (a -> b) -> [a] -> a Source #

A version of `maximum`

where the comparison is done on some extracted value.
Raises an error if the list is empty. Only calls the function once per element.

maximumOn id [] == undefined maximumOn length ["test","extra","a"] == "extra"

minimumOn :: (Partial, Ord b) => (a -> b) -> [a] -> a Source #

A version of `minimum`

where the comparison is done on some extracted value.
Raises an error if the list is empty. Only calls the function once per element.

minimumOn id [] == undefined minimumOn length ["test","extra","a"] == "a"

sumOn' :: Num b => (a -> b) -> [a] -> b Source #

A strict version of `sum`

, using a custom valuation function.

sumOn' read ["1", "2", "3"] == 6

productOn' :: Num b => (a -> b) -> [a] -> b Source #

A strict version of `product`

, using a custom valuation function.

productOn' read ["1", "2", "4"] == 8

disjoint :: Eq a => [a] -> [a] -> Bool Source #

Are two lists disjoint, with no elements in common.

disjoint [1,2,3] [4,5] == True disjoint [1,2,3] [4,1] == False

disjointOrd :: Ord a => [a] -> [a] -> Bool Source #

disjointOrdBy :: (a -> a -> Ordering) -> [a] -> [a] -> Bool Source #

A version of `disjointOrd`

with a custom predicate.

disjointOrdBy (compare `on` (`mod` 7)) [1,2,3] [4,5] == True disjointOrdBy (compare `on` (`mod` 7)) [1,2,3] [4,8] == False

allSame :: Eq a => [a] -> Bool Source #

Are all elements the same.

allSame [1,1,2] == False allSame [1,1,1] == True allSame [1] == True allSame [] == True allSame (1:1:2:undefined) == False \xs -> allSame xs == (length (nub xs) <= 1)

anySame :: Eq a => [a] -> Bool Source #

Is there any element which occurs more than once.

anySame [1,1,2] == True anySame [1,2,3] == False anySame (1:2:1:undefined) == True anySame [] == False \xs -> anySame xs == (length (nub xs) < length xs)

repeatedly :: ([a] -> (b, [a])) -> [a] -> [b] Source #

Apply some operation repeatedly, producing an element of output and the remainder of the list.

When the empty list is reached it is returned, so the operation
is *never* applied to the empty input.
That fact is encoded in the type system with `repeatedlyNE`

\xs -> repeatedly (splitAt 3) xs == chunksOf 3 xs \xs -> repeatedly word1 (trim xs) == words xs \xs -> repeatedly line1 xs == lines xs

repeatedlyNE :: (NonEmpty a -> (b, [a])) -> [a] -> [b] Source #

Apply some operation repeatedly, producing an element of output and the remainder of the list.

Identical to `repeatedly`

, but has a more precise type signature.

firstJust :: (a -> Maybe b) -> [a] -> Maybe b Source #

Find the first element of a list for which the operation returns `Just`

, along
with the result of the operation. Like `find`

but useful where the function also
computes some expensive information that can be reused. Particular useful
when the function is monadic, see `firstJustM`

.

firstJust id [Nothing,Just 3] == Just 3 firstJust id [Nothing,Nothing] == Nothing

concatUnzip :: [([a], [b])] -> ([a], [b]) Source #

concatUnzip3 :: [([a], [b], [c])] -> ([a], [b], [c]) Source #

zipFrom :: Enum a => a -> [b] -> [(a, b)] Source #

`zip`

against an enumeration.
Truncates the output if the enumeration runs out.

\i xs -> zip [i..] xs == zipFrom i xs zipFrom False [1..3] == [(False,1),(True, 2)]

zipWithFrom :: Enum a => (a -> b -> c) -> a -> [b] -> [c] Source #

`zipFrom`

generalised to any combining operation.
Truncates the output if the enumeration runs out.

\i xs -> zipWithFrom (,) i xs == zipFrom i xs

zipWithLongest :: (Maybe a -> Maybe b -> c) -> [a] -> [b] -> [c] Source #

Like `zipWith`

, but keep going to the longest value. The function
argument will always be given at least one `Just`

, and while both
lists have items, two `Just`

values.

zipWithLongest (,) "a" "xyz" == [(Just 'a', Just 'x'), (Nothing, Just 'y'), (Nothing, Just 'z')] zipWithLongest (,) "a" "x" == [(Just 'a', Just 'x')] zipWithLongest (,) "" "x" == [(Nothing, Just 'x')]

replace :: Eq a => [a] -> [a] -> [a] -> [a] Source #

Replace a subsequence everywhere it occurs.

replace "el" "_" "Hello Bella" == "H_lo B_la" replace "el" "e" "Hello" == "Helo" replace "" "x" "Hello" == "xHxexlxlxox" replace "" "x" "" == "x" \xs ys -> replace xs xs ys == ys

merge :: Ord a => [a] -> [a] -> [a] Source #

Merge two lists which are assumed to be ordered.

merge "ace" "bd" == "abcde" \xs ys -> merge (sort xs) (sort ys) == sort (xs ++ ys)

mergeBy :: (a -> a -> Ordering) -> [a] -> [a] -> [a] Source #

Like `merge`

, but with a custom ordering function.

# Data.List.NonEmpty.Extra

Extra functions available in `Data.List.NonEmpty.Extra`

.

(|:) :: [a] -> a -> NonEmpty a infixl 5 Source #

*O(n)*. Append an element to a list.

[1,2,3] |: 4 |> 5 == 1 :| [2,3,4,5]

(|>) :: NonEmpty a -> a -> NonEmpty a infixl 5 Source #

*O(n)*. Append an element to a non-empty list.

(1 :| [2,3]) |> 4 |> 5 == 1 :| [2,3,4,5]

appendl :: NonEmpty a -> [a] -> NonEmpty a Source #

Append a list to a non-empty list.

appendl (1 :| [2,3]) [4,5] == 1 :| [2,3,4,5]

appendr :: [a] -> NonEmpty a -> NonEmpty a Source #

Append a non-empty list to a list.

appendr [1,2,3] (4 :| [5]) == 1 :| [2,3,4,5]

maximumBy1 :: (a -> a -> Ordering) -> NonEmpty a -> a Source #

The largest element of a non-empty list with respect to the given comparison function.

minimumBy1 :: (a -> a -> Ordering) -> NonEmpty a -> a Source #

The least element of a non-empty list with respect to the given comparison function.

maximumOn1 :: Ord b => (a -> b) -> NonEmpty a -> a Source #

A version of `maximum1`

where the comparison is done on some extracted value.

minimumOn1 :: Ord b => (a -> b) -> NonEmpty a -> a Source #

A version of `minimum1`

where the comparison is done on some extracted value.

# Data.Monoid.Extra

Extra functions available in `Data.Monoid.Extra`

.

# Data.Tuple.Extra

Extra functions available in `Data.Tuple.Extra`

.

first :: (a -> a') -> (a, b) -> (a', b) Source #

Update the first component of a pair.

first succ (1,"test") == (2,"test")

second :: (b -> b') -> (a, b) -> (a, b') Source #

Update the second component of a pair.

second reverse (1,"test") == (1,"tset")

(***) :: (a -> a') -> (b -> b') -> (a, b) -> (a', b') infixr 3 Source #

Given two functions, apply one to the first component and one to the second.
A specialised version of `***`

.

(succ *** reverse) (1,"test") == (2,"tset")

(&&&) :: (a -> b) -> (a -> c) -> a -> (b, c) infixr 3 Source #

Given two functions, apply both to a single argument to form a pair.
A specialised version of `&&&`

.

(succ &&& pred) 1 == (2,0)

both :: (a -> b) -> (a, a) -> (b, b) Source #

Apply a single function to both components of a pair.

both succ (1,2) == (2,3)

firstM :: Functor m => (a -> m a') -> (a, b) -> m (a', b) Source #

Update the first component of a pair.

firstM (\x -> [x-1, x+1]) (1,"test") == [(0,"test"),(2,"test")]

secondM :: Functor m => (b -> m b') -> (a, b) -> m (a, b') Source #

Update the second component of a pair.

secondM (\x -> [reverse x, x]) (1,"test") == [(1,"tset"),(1,"test")]

first3 :: (a -> a') -> (a, b, c) -> (a', b, c) Source #

Update the first component of a triple.

first3 succ (1,1,1) == (2,1,1)

second3 :: (b -> b') -> (a, b, c) -> (a, b', c) Source #

Update the second component of a triple.

second3 succ (1,1,1) == (1,2,1)

third3 :: (c -> c') -> (a, b, c) -> (a, b, c') Source #

Update the third component of a triple.

third3 succ (1,1,1) == (1,1,2)

curry3 :: ((a, b, c) -> d) -> a -> b -> c -> d Source #

Converts an uncurried function to a curried function.

uncurry3 :: (a -> b -> c -> d) -> (a, b, c) -> d Source #

Converts a curried function to a function on a triple.

# Data.Version.Extra

Extra functions available in `Data.Version.Extra`

.

readVersion :: Partial => String -> Version Source #

Read a `Version`

or throw an exception.

\x -> readVersion (showVersion x) == x readVersion "hello" == undefined

# Numeric.Extra

Extra functions available in `Numeric.Extra`

.

showDP :: RealFloat a => Int -> a -> String Source #

Show a number to a fixed number of decimal places.

showDP 4 pi == "3.1416" showDP 0 pi == "3" showDP 2 3 == "3.00"

intToDouble :: Int -> Double Source #

Specialised numeric conversion, type restricted version of `fromIntegral`

.

intToFloat :: Int -> Float Source #

Specialised numeric conversion, type restricted version of `fromIntegral`

.

floatToDouble :: Float -> Double Source #

Specialised numeric conversion, type restricted version of `realToFrac`

.

doubleToFloat :: Double -> Float Source #

Specialised numeric conversion, type restricted version of `realToFrac`

.

# System.Directory.Extra

Extra functions available in `System.Directory.Extra`

.

Run an `IO`

action with the given working directory and restore the
original working directory afterwards, even if the given action fails due
to an exception.

The operation may fail with the same exceptions as `getCurrentDirectory`

and `setCurrentDirectory`

.

*Since: directory-1.2.3.0*

createDirectoryPrivate :: String -> IO () Source #

Create a directory with permissions so that only the current user can view it.
On Windows this function is equivalent to `createDirectory`

.

listContents :: FilePath -> IO [FilePath] Source #

List the files and directories directly within a directory.
Each result will be prefixed by the query directory, and the special directories `.`

and `..`

will be ignored.
Intended as a cleaned up version of `getDirectoryContents`

.

withTempDir $ \dir -> do writeFile (dir </> "test.txt") ""; (== [dir </> "test.txt"]) <$> listContents dir let touch = mapM_ $ \x -> createDirectoryIfMissing True (takeDirectory x) >> writeFile x "" let listTest op as bs = withTempDir $ \dir -> do touch $ map (dir </>) as; res <- op dir; pure $ map (drop (length dir + 1)) res == bs listTest listContents ["bar.txt","foo/baz.txt","zoo"] ["bar.txt","foo","zoo"]

listDirectories :: FilePath -> IO [FilePath] Source #

Like `listContents`

, but only returns the directories in a directory, not the files.
Each directory will be prefixed by the query directory.

listTest listDirectories ["bar.txt","foo/baz.txt","zoo"] ["foo"]

listFiles :: FilePath -> IO [FilePath] Source #

Like `listContents`

, but only returns the files in a directory, not other directories.
Each file will be prefixed by the query directory.

listTest listFiles ["bar.txt","foo/baz.txt","zoo"] ["bar.txt","zoo"]

listFilesInside :: (FilePath -> IO Bool) -> FilePath -> IO [FilePath] Source #

Like `listFilesRecursive`

, but with a predicate to decide where to recurse into.
Typically directories starting with `.`

would be ignored. The initial argument directory
will have the test applied to it.

listTest (listFilesInside $ pure . not . isPrefixOf "." . takeFileName) ["bar.txt","foo" </> "baz.txt",".foo" </> "baz2.txt", "zoo"] ["bar.txt","zoo","foo" </> "baz.txt"] listTest (listFilesInside $ const $ pure False) ["bar.txt"] []

listFilesRecursive :: FilePath -> IO [FilePath] Source #

Like `listFiles`

, but goes recursively through all subdirectories.
This function will follow symlinks, and if they form a loop, this function will not terminate.

listTest listFilesRecursive ["bar.txt","zoo","foo" </> "baz.txt"] ["bar.txt","zoo","foo" </> "baz.txt"]

# System.Info.Extra

Extra functions available in `System.Info.Extra`

.

Return `True`

on Windows and `False`

otherwise. A runtime version of `#ifdef minw32_HOST_OS`

.
Equivalent to `os == "mingw32"`

, but: more efficient; doesn't require typing an easily
mistypeable string; actually asks about your OS not a library; doesn't bake in
32bit assumptions that are already false. </rant>

isWindows == (os == "mingw32")

# System.IO.Extra

Extra functions available in `System.IO.Extra`

.

withBuffering :: Handle -> BufferMode -> IO a -> IO a Source #

Execute an action with a custom `BufferMode`

, a wrapper around
`hSetBuffering`

.

readFileEncoding :: TextEncoding -> FilePath -> IO String Source #

Like `readFile`

, but setting an encoding.

readFile' :: FilePath -> IO String #

The `readFile'`

function reads a file and
returns the contents of the file as a string.
The file is fully read before being returned, as with `getContents'`

.

*Since: base-4.15.0.0*

readFileEncoding' :: TextEncoding -> FilePath -> IO String Source #

A strict version of `readFileEncoding`

, see `readFile'`

for details.

readFileUTF8' :: FilePath -> IO String Source #

A strict version of `readFileUTF8`

, see `readFile'`

for details.

readFileBinary' :: FilePath -> IO String Source #

A strict version of `readFileBinary`

, see `readFile'`

for details.

writeFileEncoding :: TextEncoding -> FilePath -> String -> IO () Source #

Write a file with a particular encoding.

writeFileUTF8 :: FilePath -> String -> IO () Source #

Write a file with the `utf8`

encoding.

\s -> withTempFile $ \file -> do writeFileUTF8 file s; fmap (== s) $ readFileUTF8' file

writeFileBinary :: FilePath -> String -> IO () Source #

Write a binary file.

\(ASCIIString s) -> withTempFile $ \file -> do writeFileBinary file s; fmap (== s) $ readFileBinary' file

withTempFile :: (FilePath -> IO a) -> IO a Source #

Create a temporary file in the temporary directory. The file will be deleted
after the action completes (provided the file is not still open).
The `FilePath`

will not have any file extension, will exist, and will be zero bytes long.
If you require a file with a specific name, use `withTempDir`

.

withTempFile doesFileExist == pure True (doesFileExist =<< withTempFile pure) == pure False withTempFile readFile' == pure ""

withTempDir :: (FilePath -> IO a) -> IO a Source #

Create a temporary directory inside the system temporary directory. The directory will be deleted after the action completes.

withTempDir doesDirectoryExist == pure True (doesDirectoryExist =<< withTempDir pure) == pure False withTempDir listFiles == pure []

newTempFile :: IO (FilePath, IO ()) Source #

Provide a function to create a temporary file, and a way to delete a
temporary file. Most users should use `withTempFile`

which
combines these operations.

newTempDir :: IO (FilePath, IO ()) Source #

Provide a function to create a temporary directory, and a way to delete a
temporary directory. Most users should use `withTempDir`

which
combines these operations.

newTempFileWithin :: FilePath -> IO (FilePath, IO ()) Source #

Like `newTempFile`

but using a custom temporary directory.

newTempDirWithin :: FilePath -> IO (FilePath, IO ()) Source #

Like `newTempDir`

but using a custom temporary directory.

fileEq :: FilePath -> FilePath -> IO Bool Source #

Returns `True`

if both files have the same content.
Raises an error if either file is missing.

fileEq "does_not_exist1" "does_not_exist2" == undefined fileEq "does_not_exist" "does_not_exist" == undefined withTempFile $ \f1 -> fileEq "does_not_exist" f1 == undefined withTempFile $ \f1 -> withTempFile $ \f2 -> fileEq f1 f2 withTempFile $ \f1 -> withTempFile $ \f2 -> writeFile f1 "a" >> writeFile f2 "a" >> fileEq f1 f2 withTempFile $ \f1 -> withTempFile $ \f2 -> writeFile f1 "a" >> writeFile f2 "b" >> notM (fileEq f1 f2)

# System.Process.Extra

Extra functions available in `System.Process.Extra`

.

system_ :: Partial => String -> IO () Source #

A version of `system`

that throws an error if the `ExitCode`

is not `ExitSuccess`

.

systemOutput_ :: Partial => String -> IO String Source #

A version of `system`

that captures the output (both `stdout`

and `stderr`

)
and throws an error if the `ExitCode`

is not `ExitSuccess`

.

# System.Time.Extra

Extra functions available in `System.Time.Extra`

.

sleep :: Seconds -> IO () Source #

Sleep for a number of seconds.

fmap (round . fst) (duration $ sleep 1) == pure 1

timeout :: Seconds -> IO a -> IO (Maybe a) Source #

A version of `timeout`

that takes `Seconds`

and never
overflows the bounds of an `Int`

. In addition, the bug that negative
timeouts run for ever has been fixed.

timeout (-3) (print 1) == pure Nothing timeout 0.1 (print 1) == fmap Just (print 1) do (t, _) <- duration $ timeout 0.1 $ sleep 1000; print t; pure $ t < 1 timeout 0.1 (sleep 2 >> print 1) == pure Nothing

showDuration :: Seconds -> String Source #

Show a number of seconds, typically a duration, in a suitable manner with reasonable precision for a human.

showDuration 3.435 == "3.44s" showDuration 623.8 == "10m24s" showDuration 62003.8 == "17h13m" showDuration 1e8 == "27777h47m"

offsetTime :: IO (IO Seconds) Source #

Call once to start, then call repeatedly to get the elapsed time since the first call. The time is guaranteed to be monotonic. This function is robust to system time changes.

do f <- offsetTime; xs <- replicateM 10 f; pure $ xs == sort xs

offsetTimeIncrease :: IO (IO Seconds) Source #

Deprecated: Use `offsetTime`

instead, which is guaranteed to always increase.

A synonym for `offsetTime`

.