HscTypes

Types for the per-module compiler

compilation state

data HscEnv

HscEnv is like Session, except that some of the fields are immutable. An HscEnv is used to compile a single module from plain Haskell source code (after preprocessing) to either C, assembly or C--. It's also used to store the dynamic linker state to allow for multiple linkers in the same address space. Things like the module graph don't change during a single compilation.

Historical note: "hsc" used to be the name of the compiler binary, when there was a separate driver and compiler. To compile a single module, the driver would invoke hsc on the source code... so nowadays we think of hsc as the layer of the compiler that deals with compiling a single module.

Constructors

HscEnv

Fields

• hsc_dflags :: DynFlags

  The dynamic flag settings

• hsc_targets :: [Target]

  The targets (or roots) of the current session

• hsc_mod_graph :: ModuleGraph

  The module graph of the current session

• hsc_IC :: InteractiveContext

  The context for evaluating interactive statements

• hsc_HPT :: HomePackageTable

  The home package table describes already-compiled home-package modules, excluding the module we are compiling right now. (In one-shot mode the current module is the only home-package module, so hsc_HPT is empty. All other modules count as "external-package" modules. However, even in GHCi mode, hi-boot interfaces are demand-loaded into the external-package table.)

  hsc_HPT is not mutable because we only demand-load external packages; the home package is eagerly loaded, module by module, by the compilation manager.

  The HPT may contain modules compiled earlier by --make but not actually below the current module in the dependency graph.

  (This changes a previous invariant: changed Jan 05.)

• hsc_EPS :: !(IORef ExternalPackageState)

  Information about the currently loaded external packages. This is mutable because packages will be demand-loaded during a compilation run as required.

• hsc_NC :: !(IORef NameCache)

  As with hsc_EPS, this is side-effected by compiling to reflect sucking in interface files. They cache the state of external interface files, in effect.

• hsc_FC :: !(IORef FinderCache)

  The cached result of performing finding in the file system

• hsc_type_env_var :: Maybe (Module, IORef TypeEnv)

  Used for one-shot compilation only, to initialise the IfGblEnv. See tcg_type_env_var for TcGblEnv. See also Note [hsc_type_env_var hack]

• hsc_iserv :: MVar (Maybe IServ)

  interactive server process. Created the first time it is needed.

• hsc_dynLinker :: DynLinker

  dynamic linker.

hscEPS :: HscEnv -> IO ExternalPackageState

Retrieve the ExternalPackageState cache.

type FinderCache = InstalledModuleEnv InstalledFindResult

The FinderCache maps modules to the result of searching for that module. It records the results of searching for modules along the search path. On :load, we flush the entire contents of this cache.

data FindResult

The result of searching for an imported module.

NB: FindResult manages both user source-import lookups (which can result in Module) as well as direct imports for interfaces (which always result in InstalledModule).

Constructors

Found ModLocation Module

The module was found

NoPackage UnitId

The requested package was not found

FoundMultiple [(Module, ModuleOrigin)]

_Error_: both in multiple packages

NotFound

Not found

Fields

• fr_paths :: [FilePath]
• fr_pkg :: Maybe UnitId
• fr_mods_hidden :: [UnitId]
• fr_pkgs_hidden :: [UnitId]
• fr_unusables :: [(UnitId, UnusablePackageReason)]
• fr_suggestions :: [ModuleSuggestion]

data InstalledFindResult

Constructors

InstalledFound ModLocation InstalledModule

InstalledNoPackage InstalledUnitId

InstalledNotFound [FilePath] (Maybe InstalledUnitId)

data Target

A compilation target.

A target may be supplied with the actual text of the module. If so, use this instead of the file contents (this is for use in an IDE where the file hasn't been saved by the user yet).

Constructors

Target

Fields

• targetId :: TargetId

  module or filename

• targetAllowObjCode :: Bool

  object code allowed?

• targetContents :: Maybe (InputFileBuffer, UTCTime)

  Optional in-memory buffer containing the source code GHC should use for this target instead of reading it from disk.

  Since GHC version 8.10 modules which require preprocessors such as Literate Haskell or CPP to run are also supported.

  If a corresponding source file does not exist on disk this will result in a SourceError exception if targetId = TargetModule _ is used. However together with targetId = TargetFile _ GHC will not complain about the file missing.

Instances

Outputable Target

Defined in HscTypes

Methods

ppr :: Target -> SDoc

pprPrec :: Rational -> Target -> SDoc

data TargetId

Constructors

TargetModule ModuleName

A module name: search for the file

TargetFile FilePath (Maybe Phase)

A filename: preprocess & parse it to find the module name. If specified, the Phase indicates how to compile this file (which phase to start from). Nothing indicates the starting phase should be determined from the suffix of the filename.

Instances

Eq TargetId

Defined in HscTypes

Methods

(==) :: TargetId -> TargetId -> Bool

(/=) :: TargetId -> TargetId -> Bool

Outputable TargetId

Defined in HscTypes

Methods

ppr :: TargetId -> SDoc

pprPrec :: Rational -> TargetId -> SDoc

type InputFileBuffer = StringBuffer

pprTarget :: Target -> SDoc

pprTargetId :: TargetId -> SDoc

data HscStatus

Status of a compilation to hard-code

Constructors

HscNotGeneratingCode

HscUpToDate

HscUpdateBoot

HscUpdateSig

HscRecomp CgGuts ModSummary

data IServ

Constructors

IServ

Fields

• iservPipe :: Pipe
• iservProcess :: ProcessHandle
• iservLookupSymbolCache :: IORef (UniqFM (Ptr ()))
• iservPendingFrees :: [HValueRef]

ModuleGraph

data ModuleGraph

A ModuleGraph contains all the nodes from the home package (only). There will be a node for each source module, plus a node for each hi-boot module.

The graph is not necessarily stored in topologically-sorted order. Use topSortModuleGraph and flattenSCC to achieve this.

emptyMG :: ModuleGraph

mkModuleGraph :: [ModSummary] -> ModuleGraph

extendMG :: ModuleGraph -> ModSummary -> ModuleGraph

Add a ModSummary to ModuleGraph. Assumes that the new ModSummary is not an element of the ModuleGraph.

mapMG :: (ModSummary -> ModSummary) -> ModuleGraph -> ModuleGraph

Map a function f over all the ModSummaries. To preserve invariants f can't change the isBoot status.

mgModSummaries :: ModuleGraph -> [ModSummary]

mgElemModule :: ModuleGraph -> Module -> Bool

mgLookupModule :: ModuleGraph -> Module -> Maybe ModSummary

Look up a ModSummary in the ModuleGraph

needsTemplateHaskellOrQQ :: ModuleGraph -> Bool

Determines whether a set of modules requires Template Haskell or Quasi Quotes

Note that if the session's DynFlags enabled Template Haskell when depanal was called, then each module in the returned module graph will have Template Haskell enabled whether it is actually needed or not.

mgBootModules :: ModuleGraph -> ModuleSet

Hsc monad

newtype Hsc a

Constructors

Hsc (HscEnv -> WarningMessages -> IO (a, WarningMessages))

Instances

Monad Hsc

Defined in HscTypes

Methods

(>>=) :: Hsc a -> (a -> Hsc b) -> Hsc b

(>>) :: Hsc a -> Hsc b -> Hsc b

return :: a -> Hsc a

fail :: String -> Hsc a

Functor Hsc

Defined in HscTypes

Methods

fmap :: (a -> b) -> Hsc a -> Hsc b

(<$) :: a -> Hsc b -> Hsc a

Applicative Hsc

Defined in HscTypes

Methods

pure :: a -> Hsc a

(<*>) :: Hsc (a -> b) -> Hsc a -> Hsc b

liftA2 :: (a -> b -> c) -> Hsc a -> Hsc b -> Hsc c

(*>) :: Hsc a -> Hsc b -> Hsc b

(<*) :: Hsc a -> Hsc b -> Hsc a

MonadIO Hsc

Defined in HscTypes

Methods

liftIO :: IO a -> Hsc a

HasDynFlags Hsc

Defined in HscTypes

Methods

getDynFlags :: Hsc DynFlags

runHsc :: HscEnv -> Hsc a -> IO a

mkInteractiveHscEnv :: HscEnv -> HscEnv

runInteractiveHsc :: HscEnv -> Hsc a -> IO a

Information about modules

data ModDetails

The ModDetails is essentially a cache for information in the ModIface for home modules only. Information relating to packages will be loaded into global environments in ExternalPackageState.

Constructors

ModDetails

Fields

• md_exports :: [AvailInfo]
• md_types :: !TypeEnv

  Local type environment for this particular module Includes Ids, TyCons, PatSyns

• md_insts :: ![ClsInst]

  DFunIds for the instances in this module

• md_fam_insts :: ![FamInst]
• md_rules :: ![CoreRule]

  Domain may include Ids from other modules

• md_anns :: ![Annotation]

  Annotations present in this module: currently they only annotate things also declared in this module

• md_complete_sigs :: [CompleteMatch]

  Complete match pragmas for this module

emptyModDetails :: ModDetails

Constructs an empty ModDetails

data ModGuts

A ModGuts is carried through the compiler, accumulating stuff as it goes There is only one ModGuts at any time, the one for the module being compiled right now. Once it is compiled, a ModIface and ModDetails are extracted and the ModGuts is discarded.

Constructors

ModGuts

Fields

• mg_module :: !Module

  Module being compiled

• mg_hsc_src :: HscSource

  Whether it's an hs-boot module

• mg_loc :: SrcSpan

  For error messages from inner passes

• mg_exports :: ![AvailInfo]

  What it exports

• mg_deps :: !Dependencies

  What it depends on, directly or otherwise

• mg_usages :: ![Usage]

  What was used? Used for interfaces.

• mg_used_th :: !Bool

  Did we run a TH splice?

• mg_rdr_env :: !GlobalRdrEnv

  Top-level lexical environment

• mg_fix_env :: !FixityEnv

  Fixities declared in this module. Used for creating interface files.

• mg_tcs :: ![TyCon]

  TyCons declared in this module (includes TyCons for classes)

• mg_insts :: ![ClsInst]

  Class instances declared in this module

• mg_fam_insts :: ![FamInst]

  Family instances declared in this module

• mg_patsyns :: ![PatSyn]

  Pattern synonyms declared in this module

• mg_rules :: ![CoreRule]

  Before the core pipeline starts, contains See Note [Overall plumbing for rules] in Rules.hs

• mg_binds :: !CoreProgram

  Bindings for this module

• mg_foreign :: !ForeignStubs

  Foreign exports declared in this module

• mg_foreign_files :: ![(ForeignSrcLang, FilePath)]

  Files to be compiled with the C compiler

• mg_warns :: !Warnings

  Warnings declared in the module

• mg_anns :: [Annotation]

  Annotations declared in this module

• mg_complete_sigs :: [CompleteMatch]

  Complete Matches

• mg_hpc_info :: !HpcInfo

  Coverage tick boxes in the module

• mg_modBreaks :: !(Maybe ModBreaks)

  Breakpoints for the module

• mg_inst_env :: InstEnv

  Class instance environment for home-package modules (including this one); c.f. tcg_inst_env

• mg_fam_inst_env :: FamInstEnv

  Type-family instance environment for home-package modules (including this one); c.f. tcg_fam_inst_env

• mg_safe_haskell :: SafeHaskellMode

  Safe Haskell mode

• mg_trust_pkg :: Bool

  Do we need to trust our own package for Safe Haskell? See Note [RnNames . Trust Own Package]

• mg_doc_hdr :: !(Maybe HsDocString)

  Module header.

• mg_decl_docs :: !DeclDocMap

  Docs on declarations.

• mg_arg_docs :: !ArgDocMap

  Docs on arguments.

data CgGuts

A restricted form of ModGuts for code generation purposes

Constructors

CgGuts

Fields

• cg_module :: !Module

  Module being compiled

• cg_tycons :: [TyCon]

  Algebraic data types (including ones that started life as classes); generate constructors and info tables. Includes newtypes, just for the benefit of External Core

• cg_binds :: CoreProgram

  The tidied main bindings, including previously-implicit bindings for record and class selectors, and data constructor wrappers. But *not* data constructor workers; reason: we regard them as part of the code-gen of tycons

• cg_foreign :: !ForeignStubs

  Foreign export stubs

• cg_foreign_files :: ![(ForeignSrcLang, FilePath)]
• cg_dep_pkgs :: ![InstalledUnitId]

  Dependent packages, used to generate #includes for C code gen

• cg_hpc_info :: !HpcInfo

  Program coverage tick box information

• cg_modBreaks :: !(Maybe ModBreaks)

  Module breakpoints

• cg_spt_entries :: [SptEntry]

  Static pointer table entries for static forms defined in the module. See Note [Grand plan for static forms] in StaticPtrTable

data ForeignStubs

Foreign export stubs

Constructors

NoStubs

We don't have any stubs

ForeignStubs SDoc SDoc

There are some stubs. Parameters:

1) Header file prototypes for "foreign exported" functions

2) C stubs to use when calling "foreign exported" functions

appendStubC :: ForeignStubs -> SDoc -> ForeignStubs

type ImportedMods = ModuleEnv [ImportedBy]

Records the modules directly imported by a module for extracting e.g. usage information, and also to give better error message

data ImportedBy

If a module was "imported" by the user, we associate it with more detailed usage information ImportedModsVal; a module imported by the system only gets used for usage information.

Constructors

ImportedByUser ImportedModsVal

ImportedBySystem

importedByUser :: [ImportedBy] -> [ImportedModsVal]

data ImportedModsVal

Constructors

ImportedModsVal

Fields

• imv_name :: ModuleName

  The name the module is imported with

• imv_span :: SrcSpan

  the source span of the whole import

• imv_is_safe :: IsSafeImport

  whether this is a safe import

• imv_is_hiding :: Bool

  whether this is an "hiding" import

• imv_all_exports :: !GlobalRdrEnv

  all the things the module could provide NB. BangPattern here: otherwise this leaks. (#15111)

• imv_qualified :: Bool

  whether this is a qualified import

data SptEntry

An entry to be inserted into a module's static pointer table. See Note [Grand plan for static forms] in StaticPtrTable.

Constructors

SptEntry Id Fingerprint

Instances

Outputable SptEntry

Defined in LinkerTypes

Methods

ppr :: SptEntry -> SDoc

pprPrec :: Rational -> SptEntry -> SDoc

data ForeignSrcLang

Foreign formats supported by GHC via TH

Constructors

LangC

C

LangCxx

C++

LangObjc

Objective C

LangObjcxx

Objective C++

LangAsm

Assembly language (.s)

RawObject

Object (.o)

Instances

Eq ForeignSrcLang

Defined in GHC.ForeignSrcLang.Type

Methods

(==) :: ForeignSrcLang -> ForeignSrcLang -> Bool

(/=) :: ForeignSrcLang -> ForeignSrcLang -> Bool

Show ForeignSrcLang

Defined in GHC.ForeignSrcLang.Type

Methods

showsPrec :: Int -> ForeignSrcLang -> ShowS

show :: ForeignSrcLang -> String

showList :: [ForeignSrcLang] -> ShowS

Generic ForeignSrcLang

Defined in GHC.ForeignSrcLang.Type

Associated Types

type Rep ForeignSrcLang :: Type -> Type

Methods

from :: ForeignSrcLang -> Rep ForeignSrcLang x

to :: Rep ForeignSrcLang x -> ForeignSrcLang

Binary ForeignSrcLang

Defined in GHC.ForeignSrcLang

Methods

put :: ForeignSrcLang -> Put

get :: Get ForeignSrcLang

putList :: [ForeignSrcLang] -> Put

type Rep ForeignSrcLang

Defined in GHC.ForeignSrcLang.Type

type Rep ForeignSrcLang = D1 (MetaData "ForeignSrcLang" "GHC.ForeignSrcLang.Type" "ghc-lib-parser-0.20190603-Kx0cKuNoTSrIP3BHdVSSwa" False) ((C1 (MetaCons "LangC" PrefixI False) (U1 :: Type -> Type) :+: (C1 (MetaCons "LangCxx" PrefixI False) (U1 :: Type -> Type) :+: C1 (MetaCons "LangObjc" PrefixI False) (U1 :: Type -> Type))) :+: (C1 (MetaCons "LangObjcxx" PrefixI False) (U1 :: Type -> Type) :+: (C1 (MetaCons "LangAsm" PrefixI False) (U1 :: Type -> Type) :+: C1 (MetaCons "RawObject" PrefixI False) (U1 :: Type -> Type))))

phaseForeignLanguage :: Phase -> Maybe ForeignSrcLang

Foreign language of the phase if the phase deals with a foreign code

data ModSummary

A single node in a ModuleGraph. The nodes of the module graph are one of:

• A regular Haskell source module
• A hi-boot source module

Constructors

ModSummary

Fields

• ms_mod :: Module

  Identity of the module

• ms_hsc_src :: HscSource

  The module source either plain Haskell or hs-boot

• ms_location :: ModLocation

  Location of the various files belonging to the module

• ms_hs_date :: UTCTime

  Timestamp of source file

• ms_obj_date :: Maybe UTCTime

  Timestamp of object, if we have one

• ms_iface_date :: Maybe UTCTime

  Timestamp of hi file, if we *only* are typechecking (it is Nothing otherwise. See Note [Recompilation checking in -fno-code mode] and #9243

• ms_hie_date :: Maybe UTCTime

  Timestamp of hie file, if we have one

• ms_srcimps :: [(Maybe FastString, Located ModuleName)]

  Source imports of the module

• ms_textual_imps :: [(Maybe FastString, Located ModuleName)]

  Non-source imports of the module from the module *text*

• ms_parsed_mod :: Maybe HsParsedModule

  The parsed, nonrenamed source, if we have it. This is also used to support "inline module syntax" in Backpack files.

• ms_hspp_file :: FilePath

  Filename of preprocessed source file

• ms_hspp_opts :: DynFlags

  Cached flags from OPTIONS, INCLUDE and LANGUAGE pragmas in the modules source code

• ms_hspp_buf :: Maybe StringBuffer

  The actual preprocessed source, if we have it

Instances

Outputable ModSummary

Defined in HscTypes

Methods

ppr :: ModSummary -> SDoc

pprPrec :: Rational -> ModSummary -> SDoc

ms_imps :: ModSummary -> [(Maybe FastString, Located ModuleName)]

ms_installed_mod :: ModSummary -> InstalledModule

ms_mod_name :: ModSummary -> ModuleName

showModMsg :: DynFlags -> HscTarget -> Bool -> ModSummary -> String

isBootSummary :: ModSummary -> Bool

Did this ModSummary originate from a hs-boot file?

msHsFilePath :: ModSummary -> FilePath

msHiFilePath :: ModSummary -> FilePath

msObjFilePath :: ModSummary -> FilePath

data SourceModified

Indicates whether a given module's source has been modified since it was last compiled.

Constructors

SourceModified

the source has been modified

SourceUnmodified

the source has not been modified. Compilation may or may not be necessary, depending on whether any dependencies have changed since we last compiled.

SourceUnmodifiedAndStable

the source has not been modified, and furthermore all of its (transitive) dependencies are up to date; it definitely does not need to be recompiled. This is important for two reasons: (a) we can omit the version check in checkOldIface, and (b) if the module used TH splices we don't need to force recompilation.

isTemplateHaskellOrQQNonBoot :: ModSummary -> Bool

Information about the module being compiled

data HscSource

Constructors

HsSrcFile

HsBootFile

HsigFile

Instances

Eq HscSource

Defined in DriverPhases

Methods

(==) :: HscSource -> HscSource -> Bool

(/=) :: HscSource -> HscSource -> Bool

Ord HscSource

Defined in DriverPhases

Methods

compare :: HscSource -> HscSource -> Ordering

(<) :: HscSource -> HscSource -> Bool

(<=) :: HscSource -> HscSource -> Bool

(>) :: HscSource -> HscSource -> Bool

(>=) :: HscSource -> HscSource -> Bool

max :: HscSource -> HscSource -> HscSource

min :: HscSource -> HscSource -> HscSource

Show HscSource

Defined in DriverPhases

Methods

showsPrec :: Int -> HscSource -> ShowS

show :: HscSource -> String

showList :: [HscSource] -> ShowS

Binary HscSource

Defined in DriverPhases

Methods

put_ :: BinHandle -> HscSource -> IO ()

put :: BinHandle -> HscSource -> IO (Bin HscSource)

get :: BinHandle -> IO HscSource

isHsBootOrSig :: HscSource -> Bool

isHsigFile :: HscSource -> Bool

hscSourceString :: HscSource -> String

State relating to modules in this package

type HomePackageTable = DModuleNameEnv HomeModInfo

Helps us find information about modules in the home package

data HomeModInfo

Information about modules in the package being compiled

Constructors

HomeModInfo

Fields

• hm_iface :: !ModIface

  The basic loaded interface file: every loaded module has one of these, even if it is imported from another package

• hm_details :: !ModDetails

  Extra information that has been created from the ModIface for the module, typically during typechecking

• hm_linkable :: !(Maybe Linkable)

  The actual artifact we would like to link to access things in this module.

  hm_linkable might be Nothing:

  1. If this is an .hs-boot module
  2. Temporarily during compilation if we pruned away the old linkable because it was out of date.

  After a complete compilation (load), all hm_linkable fields in the HomePackageTable will be Just.

  When re-linking a module (HscNoRecomp), we construct the HomeModInfo by building a new ModDetails from the old ModIface (only).

emptyHomePackageTable :: HomePackageTable

Constructs an empty HomePackageTable

lookupHpt :: HomePackageTable -> ModuleName -> Maybe HomeModInfo

eltsHpt :: HomePackageTable -> [HomeModInfo]

filterHpt :: (HomeModInfo -> Bool) -> HomePackageTable -> HomePackageTable

allHpt :: (HomeModInfo -> Bool) -> HomePackageTable -> Bool

mapHpt :: (HomeModInfo -> HomeModInfo) -> HomePackageTable -> HomePackageTable

delFromHpt :: HomePackageTable -> ModuleName -> HomePackageTable

addToHpt :: HomePackageTable -> ModuleName -> HomeModInfo -> HomePackageTable

addListToHpt :: HomePackageTable -> [(ModuleName, HomeModInfo)] -> HomePackageTable

lookupHptDirectly :: HomePackageTable -> Unique -> Maybe HomeModInfo

listToHpt :: [(ModuleName, HomeModInfo)] -> HomePackageTable

hptCompleteSigs :: HscEnv -> [CompleteMatch]

hptInstances :: HscEnv -> (ModuleName -> Bool) -> ([ClsInst], [FamInst])

Find all the instance declarations (of classes and families) from the Home Package Table filtered by the provided predicate function. Used in tcRnImports, to select the instances that are in the transitive closure of imports from the currently compiled module.

hptRules :: HscEnv -> [(ModuleName, IsBootInterface)] -> [CoreRule]

Get rules from modules "below" this one (in the dependency sense)

pprHPT :: HomePackageTable -> SDoc

State relating to known packages

data ExternalPackageState

Information about other packages that we have slurped in by reading their interface files

Constructors

EPS

Fields

• eps_is_boot :: !(ModuleNameEnv (ModuleName, IsBootInterface))

  In OneShot mode (only), home-package modules accumulate in the external package state, and are sucked in lazily. For these home-pkg modules (only) we need to record which are boot modules. We set this field after loading all the explicitly-imported interfaces, but before doing anything else

  The ModuleName part is not necessary, but it's useful for debug prints, and it's convenient because this field comes direct from imp_dep_mods

• eps_PIT :: !PackageIfaceTable

  The ModIfaces for modules in external packages whose interfaces we have opened. The declarations in these interface files are held in the eps_decls, eps_inst_env, eps_fam_inst_env and eps_rules fields of this record, not in the mi_decls fields of the interface we have sucked in.

  What is in the PIT is:

  • The Module
  • Fingerprint info
  • Its exports
  • Fixities
  • Deprecations and warnings
• eps_free_holes :: InstalledModuleEnv (UniqDSet ModuleName)

  Cache for mi_free_holes. Ordinarily, we can rely on the eps_PIT for this information, EXCEPT that when we do dependency analysis, we need to look at the Dependencies of our imports to determine what their precise free holes are (moduleFreeHolesPrecise). We don't want to repeatedly reread in the interface for every import, so cache it here. When the PIT gets filled in we can drop these entries.

• eps_PTE :: !PackageTypeEnv

  Result of typechecking all the external package interface files we have sucked in. The domain of the mapping is external-package modules

• eps_inst_env :: !PackageInstEnv

  The total InstEnv accumulated from all the external-package modules

• eps_fam_inst_env :: !PackageFamInstEnv

  The total FamInstEnv accumulated from all the external-package modules

• eps_rule_base :: !PackageRuleBase

  The total RuleEnv accumulated from all the external-package modules

• eps_ann_env :: !PackageAnnEnv

  The total AnnEnv accumulated from all the external-package modules

• eps_complete_matches :: !PackageCompleteMatchMap

  The total CompleteMatchMap accumulated from all the external-package modules

• eps_mod_fam_inst_env :: !(ModuleEnv FamInstEnv)

  The family instances accumulated from external packages, keyed off the module that declared them

• eps_stats :: !EpsStats

  Stastics about what was loaded from external packages

data EpsStats

Accumulated statistics about what we are putting into the ExternalPackageState. "In" means stuff that is just read from interface files, "Out" means actually sucked in and type-checked

Constructors

EpsStats

Fields

• n_ifaces_in, n_decls_in, n_decls_out, n_rules_in, n_rules_out, n_insts_in, n_insts_out :: !Int

addEpsInStats :: EpsStats -> Int -> Int -> Int -> EpsStats

Add stats for one newly-read interface

type PackageTypeEnv = TypeEnv

type PackageIfaceTable = ModuleEnv ModIface

Helps us find information about modules in the imported packages

emptyPackageIfaceTable :: PackageIfaceTable

Constructs an empty PackageIfaceTable

lookupIfaceByModule :: DynFlags -> HomePackageTable -> PackageIfaceTable -> Module -> Maybe ModIface

Find the ModIface for a Module, searching in both the loaded home and external package module information

emptyModIface :: Module -> ModIface

Constructs an empty ModIface

lookupHptByModule :: HomePackageTable -> Module -> Maybe HomeModInfo

type PackageInstEnv = InstEnv

type PackageFamInstEnv = FamInstEnv

type PackageRuleBase = RuleBase

type PackageCompleteMatchMap = CompleteMatchMap

mkSOName :: Platform -> FilePath -> FilePath

mkHsSOName :: Platform -> FilePath -> FilePath

soExt :: Platform -> FilePath

Metaprogramming

data MetaRequest

The supported metaprogramming result types

Constructors

MetaE (LHsExpr GhcPs -> MetaResult)

MetaP (LPat GhcPs -> MetaResult)

MetaT (LHsType GhcPs -> MetaResult)

MetaD ([LHsDecl GhcPs] -> MetaResult)

MetaAW (Serialized -> MetaResult)

data MetaResult

data constructors not exported to ensure correct result type

metaRequestE :: Functor f => MetaHook f -> LHsExpr GhcTc -> f (LHsExpr GhcPs)

metaRequestP :: Functor f => MetaHook f -> LHsExpr GhcTc -> f (LPat GhcPs)

metaRequestT :: Functor f => MetaHook f -> LHsExpr GhcTc -> f (LHsType GhcPs)

metaRequestD :: Functor f => MetaHook f -> LHsExpr GhcTc -> f [LHsDecl GhcPs]

metaRequestAW :: Functor f => MetaHook f -> LHsExpr GhcTc -> f Serialized

type MetaHook f = MetaRequest -> LHsExpr GhcTc -> f MetaResult

Annotations

prepareAnnotations :: HscEnv -> Maybe ModGuts -> IO AnnEnv

Deal with gathering annotations in from all possible places and combining them into a single AnnEnv

Interactive context

data InteractiveContext

Interactive context, recording information about the state of the context in which statements are executed in a GHCi session.

Constructors

InteractiveContext

Fields

• ic_dflags :: DynFlags

  The DynFlags used to evaluate interative expressions and statements.

• ic_mod_index :: Int

  Each GHCi stmt or declaration brings some new things into scope. We give them names like interactive:Ghci9.T, where the ic_index is the '9'. The ic_mod_index is incremented whenever we add something to ic_tythings See Note [The interactive package]

• ic_imports :: [InteractiveImport]

  The GHCi top-level scope (ic_rn_gbl_env) is extended with these imports

  This field is only stored here so that the client can retrieve it with GHC.getContext. GHC itself doesn't use it, but does reset it to empty sometimes (such as before a GHC.load). The context is set with GHC.setContext.

• ic_tythings :: [TyThing]

  TyThings defined by the user, in reverse order of definition (ie most recent at the front) See Note [ic_tythings]

• ic_rn_gbl_env :: GlobalRdrEnv

  The cached GlobalRdrEnv, built by setContext and updated regularly It contains everything in scope at the command line, including everything in ic_tythings

• ic_instances :: ([ClsInst], [FamInst])

  All instances and family instances created during this session. These are grabbed en masse after each update to be sure that proper overlapping is retained. That is, rather than re-check the overlapping each time we update the context, we just take the results from the instance code that already does that.

• ic_fix_env :: FixityEnv

  Fixities declared in let statements

• ic_default :: Maybe [Type]

  The current default types, set by a 'default' declaration

• ic_resume :: [Resume]

  The stack of breakpoint contexts

• ic_monad :: Name

  The monad that GHCi is executing in

• ic_int_print :: Name

  The function that is used for printing results of expressions in ghci and -e mode.

• ic_cwd :: Maybe FilePath

emptyInteractiveContext :: DynFlags -> InteractiveContext

Constructs an empty InteractiveContext.

icPrintUnqual :: DynFlags -> InteractiveContext -> PrintUnqualified

Get the PrintUnqualified function based on the flags and this InteractiveContext

icInScopeTTs :: InteractiveContext -> [TyThing]

This function returns the list of visible TyThings (useful for e.g. showBindings)

icExtendGblRdrEnv :: GlobalRdrEnv -> [TyThing] -> GlobalRdrEnv

Add TyThings to the GlobalRdrEnv, earlier ones in the list shadowing later ones, and shadowing existing entries in the GlobalRdrEnv.

extendInteractiveContext :: InteractiveContext -> [TyThing] -> [ClsInst] -> [FamInst] -> Maybe [Type] -> FixityEnv -> InteractiveContext

extendInteractiveContext is called with new TyThings recently defined to update the InteractiveContext to include them. Ids are easily removed when shadowed, but Classes and TyCons are not. Some work could be done to determine whether they are entirely shadowed, but as you could still have references to them (e.g. instances for classes or values of the type for TyCons), it's not clear whether removing them is even the appropriate behavior.

extendInteractiveContextWithIds :: InteractiveContext -> [Id] -> InteractiveContext

substInteractiveContext :: InteractiveContext -> TCvSubst -> InteractiveContext

setInteractivePrintName :: InteractiveContext -> Name -> InteractiveContext

icInteractiveModule :: InteractiveContext -> Module

data InteractiveImport

Constructors

IIDecl (ImportDecl GhcPs)

Bring the exports of a particular module (filtered by an import decl) into scope

IIModule ModuleName

Bring into scope the entire top-level envt of of this module, including the things imported into it.

Instances

Outputable InteractiveImport

Defined in HscTypes

Methods

ppr :: InteractiveImport -> SDoc

pprPrec :: Rational -> InteractiveImport -> SDoc

setInteractivePackage :: HscEnv -> HscEnv

mkPrintUnqualified :: DynFlags -> GlobalRdrEnv -> PrintUnqualified

Creates some functions that work out the best ways to format names for the user according to a set of heuristics.

pprModulePrefix :: PprStyle -> Module -> OccName -> SDoc

mkQualPackage :: DynFlags -> QueryQualifyPackage

Creates a function for formatting packages based on two heuristics: (1) don't qualify if the package in question is "main", and (2) only qualify with a unit id if the package ID would be ambiguous.

mkQualModule :: DynFlags -> QueryQualifyModule

Creates a function for formatting modules based on two heuristics: (1) if the module is the current module, don't qualify, and (2) if there is only one exposed package which exports this module, don't qualify.

pkgQual :: DynFlags -> PrintUnqualified

A function which only qualifies package names if necessary; but qualifies all other identifiers.

Interfaces

data ModIface

A ModIface plus a ModDetails summarises everything we know about a compiled module. The ModIface is the stuff *before* linking, and can be written out to an interface file. The 'ModDetails is after linking and can be completely recovered from just the ModIface.

When we read an interface file, we also construct a ModIface from it, except that we explicitly make the mi_decls and a few other fields empty; as when reading we consolidate the declarations etc. into a number of indexed maps and environments in the ExternalPackageState.

Constructors

ModIface

Fields

• mi_module :: !Module

  Name of the module we are for

• mi_sig_of :: !(Maybe Module)

  Are we a sig of another mod?

• mi_iface_hash :: !Fingerprint

  Hash of the whole interface

• mi_mod_hash :: !Fingerprint

  Hash of the ABI only

• mi_flag_hash :: !Fingerprint

  Hash of the important flags used when compiling the module, excluding optimisation flags

• mi_opt_hash :: !Fingerprint

  Hash of optimisation flags

• mi_hpc_hash :: !Fingerprint

  Hash of hpc flags

• mi_plugin_hash :: !Fingerprint

  Hash of plugins

• mi_orphan :: !WhetherHasOrphans

  Whether this module has orphans

• mi_finsts :: !WhetherHasFamInst

  Whether this module has family instances. See Note [The type family instance consistency story].

• mi_hsc_src :: !HscSource

  Boot? Signature?

• mi_deps :: Dependencies

  The dependencies of the module. This is consulted for directly-imported modules, but not for anything else (hence lazy)

• mi_usages :: [Usage]

  Usages; kept sorted so that it's easy to decide whether to write a new iface file (changing usages doesn't affect the hash of this module) NOT STRICT! we read this field lazily from the interface file It is *only* consulted by the recompilation checker

• mi_exports :: ![IfaceExport]

  Exports Kept sorted by (mod,occ), to make version comparisons easier Records the modules that are the declaration points for things exported by this module, and the OccNames of those things

• mi_exp_hash :: !Fingerprint

  Hash of export list

• mi_used_th :: !Bool

  Module required TH splices when it was compiled. This disables recompilation avoidance (see #481).

• mi_fixities :: [(OccName, Fixity)]

  Fixities NOT STRICT! we read this field lazily from the interface file

• mi_warns :: Warnings

  Warnings NOT STRICT! we read this field lazily from the interface file

• mi_anns :: [IfaceAnnotation]

  Annotations NOT STRICT! we read this field lazily from the interface file

• mi_decls :: [(Fingerprint, IfaceDecl)]

  Type, class and variable declarations The hash of an Id changes if its fixity or deprecations change (as well as its type of course) Ditto data constructors, class operations, except that the hash of the parent class/tycon changes

• mi_globals :: !(Maybe GlobalRdrEnv)

  Binds all the things defined at the top level in the original source code for this module. which is NOT the same as mi_exports, nor mi_decls (which may contains declarations for things not actually defined by the user). Used for GHCi and for inspecting the contents of modules via the GHC API only.

  (We need the source file to figure out the top-level environment, if we didn't compile this module from source then this field contains Nothing).

  Strictly speaking this field should live in the HomeModInfo, but that leads to more plumbing.

• mi_insts :: [IfaceClsInst]

  Sorted class instance

• mi_fam_insts :: [IfaceFamInst]

  Sorted family instances

• mi_rules :: [IfaceRule]

  Sorted rules

• mi_orphan_hash :: !Fingerprint

  Hash for orphan rules, class and family instances combined

• mi_warn_fn :: OccName -> Maybe WarningTxt

  Cached lookup for mi_warns

• mi_fix_fn :: OccName -> Maybe Fixity

  Cached lookup for mi_fixities

• mi_hash_fn :: OccName -> Maybe (OccName, Fingerprint)

  Cached lookup for mi_decls. The Nothing in mi_hash_fn means that the thing isn't in decls. It's useful to know that when seeing if we are up to date wrt. the old interface. The OccName is the parent of the name, if it has one.

• mi_hpc :: !AnyHpcUsage

  True if this program uses Hpc at any point in the program.

• mi_trust :: !IfaceTrustInfo

  Safe Haskell Trust information for this module.

• mi_trust_pkg :: !Bool

  Do we require the package this module resides in be trusted to trust this module? This is used for the situation where a module is Safe (so doesn't require the package be trusted itself) but imports some trustworthy modules from its own package (which does require its own package be trusted). See Note [RnNames . Trust Own Package]

• mi_complete_sigs :: [IfaceCompleteMatch]
• mi_doc_hdr :: Maybe HsDocString

  Module header.

• mi_decl_docs :: DeclDocMap

  Docs on declarations.

• mi_arg_docs :: ArgDocMap

  Docs on arguments.

Instances

Binary ModIface

Defined in HscTypes

Methods

put_ :: BinHandle -> ModIface -> IO ()

put :: BinHandle -> ModIface -> IO (Bin ModIface)

get :: BinHandle -> IO ModIface

mkIfaceWarnCache :: Warnings -> OccName -> Maybe WarningTxt

Constructs the cache for the mi_warn_fn field of a ModIface

mkIfaceHashCache :: [(Fingerprint, IfaceDecl)] -> OccName -> Maybe (OccName, Fingerprint)

Constructs cache for the mi_hash_fn field of a ModIface

mkIfaceFixCache :: [(OccName, Fixity)] -> OccName -> Maybe Fixity

Creates cached lookup for the mi_fix_fn field of ModIface

emptyIfaceWarnCache :: OccName -> Maybe WarningTxt

mi_boot :: ModIface -> Bool

Old-style accessor for whether or not the ModIface came from an hs-boot file.

mi_fix :: ModIface -> OccName -> Fixity

Lookups up a (possibly cached) fixity from a ModIface. If one cannot be found, defaultFixity is returned instead.

mi_semantic_module :: ModIface -> Module

The semantic module for this interface; e.g., if it's a interface for a signature, if mi_module is p[A=A]:A, mi_semantic_module will be A.

mi_free_holes :: ModIface -> UniqDSet ModuleName

The "precise" free holes, e.g., the signatures that this ModIface depends on.

renameFreeHoles :: UniqDSet ModuleName -> [(ModuleName, Module)] -> UniqDSet ModuleName

Given a set of free holes, and a unit identifier, rename the free holes according to the instantiation of the unit identifier. For example, if we have A and B free, and our unit identity is p[A=C,B=impl:B], the renamed free holes are just C.

Fixity

type FixityEnv = NameEnv FixItem

Fixity environment mapping names to their fixities

data FixItem

Fixity information for an Name. We keep the OccName in the range so that we can generate an interface from it

Constructors

FixItem OccName Fixity

Instances

Outputable FixItem

Defined in HscTypes

Methods

ppr :: FixItem -> SDoc

pprPrec :: Rational -> FixItem -> SDoc

lookupFixity :: FixityEnv -> Name -> Fixity

emptyFixityEnv :: FixityEnv

TyThings and type environments

data TyThing

A global typecheckable-thing, essentially anything that has a name. Not to be confused with a TcTyThing, which is also a typecheckable thing but in the *local* context. See TcEnv for how to retrieve a TyThing given a Name.

Constructors

AnId Id

AConLike ConLike

ATyCon TyCon

ACoAxiom (CoAxiom Branched)

Instances

Outputable TyThing

Defined in TyCoRep

Methods

ppr :: TyThing -> SDoc

pprPrec :: Rational -> TyThing -> SDoc

NamedThing TyThing

Defined in TyCoRep

Methods

getOccName :: TyThing -> OccName

getName :: TyThing -> Name

tyThingAvailInfo :: TyThing -> [AvailInfo]

The Names that a TyThing should bring into scope. Used to build the GlobalRdrEnv for the InteractiveContext.

tyThingTyCon :: TyThing -> TyCon

Get the TyCon from a TyThing if it is a type constructor thing. Panics otherwise

tyThingDataCon :: TyThing -> DataCon

Get the DataCon from a TyThing if it is a data constructor thing. Panics otherwise

tyThingConLike :: TyThing -> ConLike

Get the ConLike from a TyThing if it is a data constructor thing. Panics otherwise

tyThingId :: TyThing -> Id

Get the Id from a TyThing if it is a id *or* data constructor thing. Panics otherwise

tyThingCoAxiom :: TyThing -> CoAxiom Branched

Get the CoAxiom from a TyThing if it is a coercion axiom thing. Panics otherwise

tyThingParent_maybe :: TyThing -> Maybe TyThing

tyThingParent_maybe x returns (Just p) when pprTyThingInContext should print a declaration for p (albeit with some "..." in it) when asked to show x It returns the *immediate* parent. So a datacon returns its tycon but the tycon could be the associated type of a class, so it in turn might have a parent.

tyThingsTyCoVars :: [TyThing] -> TyCoVarSet

implicitTyThings :: TyThing -> [TyThing]

Determine the TyThings brought into scope by another TyThing other than itself. For example, Id's don't have any implicit TyThings as they just bring themselves into scope, but classes bring their dictionary datatype, type constructor and some selector functions into scope, just for a start!

implicitTyConThings :: TyCon -> [TyThing]

implicitClassThings :: Class -> [TyThing]

isImplicitTyThing :: TyThing -> Bool

Returns True if there should be no interface-file declaration for this thing on its own: either it is built-in, or it is part of some other declaration, or it is generated implicitly by some other declaration.

type TypeEnv = NameEnv TyThing

A map from Names to TyThings, constructed by typechecking local declarations or interface files

lookupType :: DynFlags -> HomePackageTable -> PackageTypeEnv -> Name -> Maybe TyThing

Find the TyThing for the given Name by using all the resources at our disposal: the compiled modules in the HomePackageTable and the compiled modules in other packages that live in PackageTypeEnv. Note that this does NOT look up the TyThing in the module being compiled: you have to do that yourself, if desired

lookupTypeHscEnv :: HscEnv -> Name -> IO (Maybe TyThing)

As lookupType, but with a marginally easier-to-use interface if you have a HscEnv

mkTypeEnv :: [TyThing] -> TypeEnv

emptyTypeEnv :: TypeEnv

typeEnvFromEntities :: [Id] -> [TyCon] -> [FamInst] -> TypeEnv

mkTypeEnvWithImplicits :: [TyThing] -> TypeEnv

extendTypeEnv :: TypeEnv -> TyThing -> TypeEnv

extendTypeEnvList :: TypeEnv -> [TyThing] -> TypeEnv

extendTypeEnvWithIds :: TypeEnv -> [Id] -> TypeEnv

plusTypeEnv :: TypeEnv -> TypeEnv -> TypeEnv

lookupTypeEnv :: TypeEnv -> Name -> Maybe TyThing

typeEnvElts :: TypeEnv -> [TyThing]

typeEnvTyCons :: TypeEnv -> [TyCon]

typeEnvIds :: TypeEnv -> [Id]

typeEnvPatSyns :: TypeEnv -> [PatSyn]

typeEnvDataCons :: TypeEnv -> [DataCon]

typeEnvCoAxioms :: TypeEnv -> [CoAxiom Branched]

typeEnvClasses :: TypeEnv -> [Class]

MonadThings

class Monad m => MonadThings m where

Class that abstracts out the common ability of the monads in GHC to lookup a TyThing in the monadic environment by Name. Provides a number of related convenience functions for accessing particular kinds of TyThing

Minimal complete definition

lookupThing

Methods

lookupThing :: Name -> m TyThing

lookupId :: Name -> m Id

lookupDataCon :: Name -> m DataCon

lookupTyCon :: Name -> m TyCon

Information on imports and exports

type WhetherHasOrphans = Bool

Records whether a module has orphans. An "orphan" is one of:

• An instance declaration in a module other than the definition module for one of the type constructors or classes in the instance head
• A transformation rule in a module other than the one defining the function in the head of the rule

type IsBootInterface = Bool

Did this module originate from a *-boot file?

data Usage

Records modules for which changes may force recompilation of this module See wiki: https://gitlab.haskell.org/ghc/ghc/wikis/commentary/compiler/recompilation-avoidance

This differs from Dependencies. A module X may be in the dep_mods of this module (via an import chain) but if we don't use anything from X it won't appear in our Usage

Constructors

UsagePackageModule

Module from another package

Fields

• usg_mod :: Module

  External package module depended on

• usg_mod_hash :: Fingerprint

  Cached module fingerprint

• usg_safe :: IsSafeImport

  Was this module imported as a safe import

UsageHomeModule

Module from the current package | A file upon which the module depends, e.g. a CPP #include, or using TH's addDependentFile

Fields

• usg_mod_name :: ModuleName

  Name of the module

• usg_mod_hash :: Fingerprint

  Cached module fingerprint

• usg_entities :: [(OccName, Fingerprint)]

  Entities we depend on, sorted by occurrence name and fingerprinted. NB: usages are for parent names only, e.g. type constructors but not the associated data constructors.

• usg_exports :: Maybe Fingerprint

  Fingerprint for the export list of this module, if we directly imported it (and hence we depend on its export list)

• usg_safe :: IsSafeImport

  Was this module imported as a safe import

UsageFile

Fields

• usg_file_path :: FilePath

  External file dependency. From a CPP #include or TH addDependentFile. Should be absolute.

• usg_file_hash :: Fingerprint

  Fingerprint of the file contents.

UsageMergedRequirement

A requirement which was merged into this one.

Fields

• usg_mod :: Module

  External package module depended on

• usg_mod_hash :: Fingerprint

  Cached module fingerprint

Instances

Eq Usage

Defined in HscTypes

Methods

(==) :: Usage -> Usage -> Bool

(/=) :: Usage -> Usage -> Bool

Binary Usage

Defined in HscTypes

Methods

put_ :: BinHandle -> Usage -> IO ()

put :: BinHandle -> Usage -> IO (Bin Usage)

get :: BinHandle -> IO Usage

data Dependencies

Dependency information about ALL modules and packages below this one in the import hierarchy.

Invariant: the dependencies of a module M never includes M.

Invariant: none of the lists contain duplicates.

Constructors

Deps

Fields

• dep_mods :: [(ModuleName, IsBootInterface)]

  All home-package modules transitively below this one I.e. modules that this one imports, or that are in the dep_mods of those directly-imported modules

• dep_pkgs :: [(InstalledUnitId, Bool)]

  All packages transitively below this module I.e. packages to which this module's direct imports belong, or that are in the dep_pkgs of those modules The bool indicates if the package is required to be trusted when the module is imported as a safe import (Safe Haskell). See Note [RnNames . Tracking Trust Transitively]

• dep_orphs :: [Module]

  Transitive closure of orphan modules (whether home or external pkg).

  (Possible optimization: don't include family instance orphans as they are anyway included in dep_finsts. But then be careful about code which relies on dep_orphs having the complete list!) This does NOT include us, unlike imp_orphs.

• dep_finsts :: [Module]

  Transitive closure of depended upon modules which contain family instances (whether home or external). This is used by checkFamInstConsistency. This does NOT include us, unlike imp_finsts. See Note [The type family instance consistency story].

• dep_plgins :: [ModuleName]

  All the plugins used while compiling this module.

Instances

Eq Dependencies

Defined in HscTypes

Methods

(==) :: Dependencies -> Dependencies -> Bool

(/=) :: Dependencies -> Dependencies -> Bool

Binary Dependencies

Defined in HscTypes

Methods

put_ :: BinHandle -> Dependencies -> IO ()

put :: BinHandle -> Dependencies -> IO (Bin Dependencies)

get :: BinHandle -> IO Dependencies

noDependencies :: Dependencies

updNameCache :: IORef NameCache -> (NameCache -> (NameCache, c)) -> IO c

type IfaceExport = AvailInfo

The original names declared of a certain module that are exported

Warnings

data Warnings

Warning information for a module

Constructors

NoWarnings

Nothing deprecated

WarnAll WarningTxt

Whole module deprecated

WarnSome [(OccName, WarningTxt)]

Some specific things deprecated

Instances

Eq Warnings

Defined in HscTypes

Methods

(==) :: Warnings -> Warnings -> Bool

(/=) :: Warnings -> Warnings -> Bool

Binary Warnings

Defined in HscTypes

Methods

put_ :: BinHandle -> Warnings -> IO ()

put :: BinHandle -> Warnings -> IO (Bin Warnings)

get :: BinHandle -> IO Warnings

data WarningTxt

Warning Text

reason/explanation from a WARNING or DEPRECATED pragma

Constructors

WarningTxt (Located SourceText) [Located StringLiteral]

DeprecatedTxt (Located SourceText) [Located StringLiteral]

Instances

Eq WarningTxt

Defined in BasicTypes

Methods

(==) :: WarningTxt -> WarningTxt -> Bool

(/=) :: WarningTxt -> WarningTxt -> Bool

Data WarningTxt

Defined in BasicTypes

Methods

gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> WarningTxt -> c WarningTxt

gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c WarningTxt

toConstr :: WarningTxt -> Constr

dataTypeOf :: WarningTxt -> DataType

dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c WarningTxt)

dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c WarningTxt)

gmapT :: (forall b. Data b => b -> b) -> WarningTxt -> WarningTxt

gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> WarningTxt -> r

gmapQr :: (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> WarningTxt -> r

gmapQ :: (forall d. Data d => d -> u) -> WarningTxt -> [u]

gmapQi :: Int -> (forall d. Data d => d -> u) -> WarningTxt -> u

gmapM :: Monad m => (forall d. Data d => d -> m d) -> WarningTxt -> m WarningTxt

gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> WarningTxt -> m WarningTxt

gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> WarningTxt -> m WarningTxt

Outputable WarningTxt

Defined in BasicTypes

Methods

ppr :: WarningTxt -> SDoc

pprPrec :: Rational -> WarningTxt -> SDoc

Binary WarningTxt

Defined in Binary

Methods

put_ :: BinHandle -> WarningTxt -> IO ()

put :: BinHandle -> WarningTxt -> IO (Bin WarningTxt)

get :: BinHandle -> IO WarningTxt

plusWarns :: Warnings -> Warnings -> Warnings

Linker stuff

data Linkable

Information we can use to dynamically link modules into the compiler

Constructors

LM

Fields

• linkableTime :: UTCTime

  Time at which this linkable was built (i.e. when the bytecodes were produced, or the mod date on the files)

• linkableModule :: Module

  The linkable module itself

• linkableUnlinked :: [Unlinked]

  Those files and chunks of code we have yet to link.

  INVARIANT: A valid linkable always has at least one Unlinked item. If this list is empty, the Linkable represents a fake linkable, which is generated in HscNothing mode to avoid recompiling modules.

  ToDo: Do items get removed from this list when they get linked?

Instances

Outputable Linkable

Defined in LinkerTypes

Methods

ppr :: Linkable -> SDoc

pprPrec :: Rational -> Linkable -> SDoc

isObjectLinkable :: Linkable -> Bool

linkableObjs :: Linkable -> [FilePath]

data Unlinked

Objects which have yet to be linked by the compiler

Constructors

DotO FilePath

An object file (.o)

DotA FilePath

Static archive file (.a)

DotDLL FilePath

Dynamically linked library file (.so, .dll, .dylib)

BCOs CompiledByteCode [SptEntry]

A byte-code object, lives only in memory. Also carries some static pointer table entries which should be loaded along with the BCOs. See Note [Grant plan for static forms] in StaticPtrTable.

Instances

Outputable Unlinked

Defined in LinkerTypes

Methods

ppr :: Unlinked -> SDoc

pprPrec :: Rational -> Unlinked -> SDoc

data CompiledByteCode

Instances

Outputable CompiledByteCode

Defined in ByteCodeTypes

Methods

ppr :: CompiledByteCode -> SDoc

pprPrec :: Rational -> CompiledByteCode -> SDoc

isObject :: Unlinked -> Bool

Is this an actual file on disk we can link in somehow?

nameOfObject :: Unlinked -> FilePath

Retrieve the filename of the linkable if possible. Panic if it is a byte-code object

isInterpretable :: Unlinked -> Bool

Is this a bytecode linkable with no file on disk?

byteCodeOfObject :: Unlinked -> CompiledByteCode

Retrieve the compiled byte-code if possible. Panic if it is a file-based linkable

Program coverage

data HpcInfo

Information about a modules use of Haskell Program Coverage

Constructors

HpcInfo

Fields

• hpcInfoTickCount :: Int
• hpcInfoHash :: Int

NoHpcInfo

Fields

• hpcUsed :: AnyHpcUsage

  Is hpc used anywhere on the module *tree*?

emptyHpcInfo :: AnyHpcUsage -> HpcInfo

isHpcUsed :: HpcInfo -> AnyHpcUsage

Find out if HPC is used by this module or any of the modules it depends upon

type AnyHpcUsage = Bool

This is used to signal if one of my imports used HPC instrumentation even if there is no module-local HPC usage

Breakpoints

data ModBreaks

All the information about the breakpoints for a module

Constructors

ModBreaks

Fields

• modBreaks_flags :: ForeignRef BreakArray

  The array of flags, one per breakpoint, indicating which breakpoints are enabled.

• modBreaks_locs :: !(Array BreakIndex SrcSpan)

  An array giving the source span of each breakpoint.

• modBreaks_vars :: !(Array BreakIndex [OccName])

  An array giving the names of the free variables at each breakpoint.

• modBreaks_decls :: !(Array BreakIndex [String])

  An array giving the names of the declarations enclosing each breakpoint.

• modBreaks_ccs :: !(Array BreakIndex (RemotePtr CostCentre))

  Array pointing to cost centre for each breakpoint

• modBreaks_breakInfo :: IntMap CgBreakInfo

  info about each breakpoint from the bytecode generator

emptyModBreaks :: ModBreaks

Construct an empty ModBreaks

Safe Haskell information

data IfaceTrustInfo

Safe Haskell information for ModIface Simply a wrapper around SafeHaskellMode to sepperate iface and flags

Instances

Outputable IfaceTrustInfo

Defined in HscTypes

Methods

ppr :: IfaceTrustInfo -> SDoc

pprPrec :: Rational -> IfaceTrustInfo -> SDoc

Binary IfaceTrustInfo

Defined in HscTypes

Methods

put_ :: BinHandle -> IfaceTrustInfo -> IO ()

put :: BinHandle -> IfaceTrustInfo -> IO (Bin IfaceTrustInfo)

get :: BinHandle -> IO IfaceTrustInfo

getSafeMode :: IfaceTrustInfo -> SafeHaskellMode

setSafeMode :: SafeHaskellMode -> IfaceTrustInfo

noIfaceTrustInfo :: IfaceTrustInfo

trustInfoToNum :: IfaceTrustInfo -> Word8

numToTrustInfo :: Word8 -> IfaceTrustInfo

type IsSafeImport = Bool

Is an import a safe import?

result of the parser

data HsParsedModule

Constructors

HsParsedModule

Fields

• hpm_module :: Located (HsModule GhcPs)
• hpm_src_files :: [FilePath]

  extra source files (e.g. from #includes). The lexer collects these from '# file line' pragmas, which the C preprocessor leaves behind. These files and their timestamps are stored in the .hi file, so that we can force recompilation if any of them change (#3589)

• hpm_annotations :: ApiAnns

Compilation errors and warnings

data SourceError

A source error is an error that is caused by one or more errors in the source code. A SourceError is thrown by many functions in the compilation pipeline. Inside GHC these errors are merely printed via log_action, but API clients may treat them differently, for example, insert them into a list box. If you want the default behaviour, use the idiom:

handleSourceError printExceptionAndWarnings $ do
  ... api calls that may fail ...

The SourceErrors error messages can be accessed via srcErrorMessages. This list may be empty if the compiler failed due to -Werror (Opt_WarnIsError).

See printExceptionAndWarnings for more information on what to take care of when writing a custom error handler.

Instances

Show SourceError

Defined in HscTypes

Methods

showsPrec :: Int -> SourceError -> ShowS

show :: SourceError -> String

showList :: [SourceError] -> ShowS

Exception SourceError

Defined in HscTypes

Methods

toException :: SourceError -> SomeException

fromException :: SomeException -> Maybe SourceError

displayException :: SourceError -> String

data GhcApiError

An error thrown if the GHC API is used in an incorrect fashion.

Instances

Show GhcApiError

Defined in HscTypes

Methods

showsPrec :: Int -> GhcApiError -> ShowS

show :: GhcApiError -> String

showList :: [GhcApiError] -> ShowS

Exception GhcApiError

Defined in HscTypes

Methods

toException :: GhcApiError -> SomeException

fromException :: SomeException -> Maybe GhcApiError

displayException :: GhcApiError -> String

mkSrcErr :: ErrorMessages -> SourceError

srcErrorMessages :: SourceError -> ErrorMessages

mkApiErr :: DynFlags -> SDoc -> GhcApiError

throwOneError :: MonadIO io => ErrMsg -> io a

throwErrors :: MonadIO io => ErrorMessages -> io a

handleSourceError

Arguments

:: ExceptionMonad m

=> (SourceError -> m a)

exception handler

-> m a

action to perform

-> m a

Perform the given action and call the exception handler if the action throws a SourceError. See SourceError for more information.

handleFlagWarnings :: DynFlags -> [Warn] -> IO ()

printOrThrowWarnings :: DynFlags -> Bag WarnMsg -> IO ()

Given a bag of warnings, turn them into an exception if -Werror is enabled, or print them out otherwise.

COMPLETE signature

data CompleteMatch

A list of conlikes which represents a complete pattern match. These arise from COMPLETE signatures.

Constructors

CompleteMatch

Fields

• completeMatchConLikes :: [Name]

  The ConLikes that form a covering family (e.g. Nothing, Just)

• completeMatchTyCon :: Name

  The TyCon that they cover (e.g. Maybe)

Instances

Outputable CompleteMatch

Defined in HscTypes

Methods

ppr :: CompleteMatch -> SDoc

pprPrec :: Rational -> CompleteMatch -> SDoc

type CompleteMatchMap = UniqFM [CompleteMatch]

A map keyed by the completeMatchTyCon.

mkCompleteMatchMap :: [CompleteMatch] -> CompleteMatchMap

extendCompleteMatchMap :: CompleteMatchMap -> [CompleteMatch] -> CompleteMatchMap