{-
(c) The AQUA Project, Glasgow University, 1993-1998

The simplifier utilities
-}



module GHC.Core.Opt.Simplify.Utils (
        -- Rebuilding
        rebuildLam, mkCase, prepareAlts,
        tryEtaExpandRhs, wantEtaExpansion,

        -- Inlining,
        preInlineUnconditionally, postInlineUnconditionally,
        activeUnfolding, activeRule,
        getUnfoldingInRuleMatch,
        updModeForStableUnfoldings, updModeForRules,

        -- The BindContext type
        BindContext(..), bindContextLevel,

        -- The continuation type
        SimplCont(..), DupFlag(..), FromWhat(..), StaticEnv,
        isSimplified, contIsStop,
        contIsDupable, contResultType, contHoleType, contHoleScaling,
        contIsTrivial, contArgs, contIsRhs,
        countArgs,
        mkBoringStop, mkRhsStop, mkLazyArgStop,
        interestingCallContext,

        -- ArgInfo
        ArgInfo(..), ArgSpec(..), RewriteCall(..), mkArgInfo,
        addValArgTo, addCastTo, addTyArgTo,
        argInfoExpr, argInfoAppArgs,
        pushSimplifiedArgs, pushSimplifiedRevArgs,
        isStrictArgInfo, lazyArgContext,

        abstractFloats,

        -- Utilities
        isExitJoinId
    ) where

import GHC.Prelude hiding (head, init, last, tail)
import qualified GHC.Prelude as Partial (head)

import GHC.Core
import GHC.Types.Literal ( isLitRubbish )
import GHC.Core.Opt.Simplify.Env
import GHC.Core.Opt.Simplify.Inline
import GHC.Core.Opt.Stats ( Tick(..) )
import qualified GHC.Core.Subst
import GHC.Core.Ppr
import GHC.Core.TyCo.Ppr ( pprParendType )
import GHC.Core.FVs
import GHC.Core.Utils
import GHC.Core.Rules( RuleEnv, getRules )
import GHC.Core.Opt.Arity
import GHC.Core.Unfold
import GHC.Core.Unfold.Make
import GHC.Core.Opt.Simplify.Monad
import GHC.Core.Type     hiding( substTy )
import GHC.Core.Coercion hiding( substCo )
import GHC.Core.DataCon ( dataConWorkId, isNullaryRepDataCon )
import GHC.Core.Multiplicity
import GHC.Core.Opt.ConstantFold

import GHC.Types.Name
import GHC.Types.Id
import GHC.Types.Id.Info
import GHC.Types.Tickish
import GHC.Types.Demand
import GHC.Types.Var.Set
import GHC.Types.Basic

import GHC.Data.OrdList ( isNilOL )
import GHC.Data.FastString ( fsLit )

import GHC.Utils.Misc
import GHC.Utils.Monad
import GHC.Utils.Outputable
import GHC.Utils.Panic
import GHC.Utils.Panic.Plain

import Control.Monad    ( when )
import Data.List        ( sortBy )

{- *********************************************************************
*                                                                      *
                The BindContext type
*                                                                      *
********************************************************************* -}

-- What sort of binding is this? A let-binding or a join-binding?
data BindContext
  = BC_Let                 -- A regular let-binding
      TopLevelFlag RecFlag

  | BC_Join                -- A join point with continuation k
      RecFlag              -- See Note [Rules and unfolding for join points]
      SimplCont            -- in GHC.Core.Opt.Simplify

bindContextLevel :: BindContext -> TopLevelFlag
bindContextLevel :: BindContext -> TopLevelFlag
bindContextLevel (BC_Let TopLevelFlag
top_lvl RecFlag
_) = TopLevelFlag
top_lvl
bindContextLevel (BC_Join {})       = TopLevelFlag
NotTopLevel

bindContextRec :: BindContext -> RecFlag
bindContextRec :: BindContext -> RecFlag
bindContextRec (BC_Let TopLevelFlag
_ RecFlag
rec_flag)  = RecFlag
rec_flag
bindContextRec (BC_Join RecFlag
rec_flag SimplCont
_) = RecFlag
rec_flag

isJoinBC :: BindContext -> Bool
isJoinBC :: BindContext -> Bool
isJoinBC (BC_Let {})  = Bool
False
isJoinBC (BC_Join {}) = Bool
True


{- *********************************************************************
*                                                                      *
                The SimplCont and DupFlag types
*                                                                      *
************************************************************************

A SimplCont allows the simplifier to traverse the expression in a
zipper-like fashion.  The SimplCont represents the rest of the expression,
"above" the point of interest.

You can also think of a SimplCont as an "evaluation context", using
that term in the way it is used for operational semantics. This is the
way I usually think of it, For example you'll often see a syntax for
evaluation context looking like
        C ::= []  |  C e   |  case C of alts  |  C `cast` co
That's the kind of thing we are doing here, and I use that syntax in
the comments.


Key points:
  * A SimplCont describes a *strict* context (just like
    evaluation contexts do).  E.g. Just [] is not a SimplCont

  * A SimplCont describes a context that *does not* bind
    any variables.  E.g. \x. [] is not a SimplCont
-}

data SimplCont
  = Stop                -- ^ Stop[e] = e
        OutType         -- ^ Type of the <hole>
        CallCtxt        -- ^ Tells if there is something interesting about
                        --          the syntactic context, and hence the inliner
                        --          should be a bit keener (see interestingCallContext)
                        -- Specifically:
                        --     This is an argument of a function that has RULES
                        --     Inlining the call might allow the rule to fire
                        -- Never ValAppCxt (use ApplyToVal instead)
                        -- or CaseCtxt (use Select instead)
        SubDemand       -- ^ The evaluation context of e. Tells how e is evaluated.
                        -- This fuels eta-expansion or eta-reduction without looking
                        -- at lambda bodies, for example.
                        --
                        -- See Note [Eta reduction based on evaluation context]
                        -- The evaluation context for other SimplConts can be
                        -- reconstructed with 'contEvalContext'


  | CastIt              -- (CastIt co K)[e] = K[ e `cast` co ]
        OutCoercion             -- The coercion simplified
                                -- Invariant: never an identity coercion
        SimplCont

  | ApplyToVal         -- (ApplyToVal arg K)[e] = K[ e arg ]
      { SimplCont -> DupFlag
sc_dup     :: DupFlag   -- See Note [DupFlag invariants]
      , SimplCont -> OutType
sc_hole_ty :: OutType   -- Type of the function, presumably (forall a. blah)
                                -- See Note [The hole type in ApplyToTy]
      , SimplCont -> OutExpr
sc_arg  :: InExpr       -- The argument,
      , SimplCont -> StaticEnv
sc_env  :: StaticEnv    -- see Note [StaticEnv invariant]
      , SimplCont -> SimplCont
sc_cont :: SimplCont }

  | ApplyToTy          -- (ApplyToTy ty K)[e] = K[ e ty ]
      { SimplCont -> OutType
sc_arg_ty  :: OutType     -- Argument type
      , sc_hole_ty :: OutType     -- Type of the function, presumably (forall a. blah)
                                  -- See Note [The hole type in ApplyToTy]
      , sc_cont    :: SimplCont }

  | Select             -- (Select alts K)[e] = K[ case e of alts ]
      { sc_dup  :: DupFlag        -- See Note [DupFlag invariants]
      , SimplCont -> Id
sc_bndr :: InId           -- case binder
      , SimplCont -> [InAlt]
sc_alts :: [InAlt]        -- Alternatives
      , sc_env  :: StaticEnv      -- See Note [StaticEnv invariant]
      , sc_cont :: SimplCont }

  -- The two strict forms have no DupFlag, because we never duplicate them
  | StrictBind          -- (StrictBind x b K)[e] = let x = e in K[b]
                        --       or, equivalently,  = K[ (\x.b) e ]
      { sc_dup   :: DupFlag        -- See Note [DupFlag invariants]
      , SimplCont -> FromWhat
sc_from  :: FromWhat
      , sc_bndr  :: InId
      , SimplCont -> OutExpr
sc_body  :: InExpr
      , sc_env   :: StaticEnv      -- Static env for both sc_bndr (stable unfolding thereof)
                                   -- and sc_body.  Also see Note [StaticEnv invariant]
      , sc_cont  :: SimplCont }

  | StrictArg           -- (StrictArg (f e1 ..en) K)[e] = K[ f e1 .. en e ]
      { sc_dup  :: DupFlag     -- Always Simplified or OkToDup
      , SimplCont -> ArgInfo
sc_fun  :: ArgInfo     -- Specifies f, e1..en, Whether f has rules, etc
                               --     plus demands and discount flags for *this* arg
                               --          and further args
                               --     So ai_dmds and ai_discs are never empty
      , SimplCont -> OutType
sc_fun_ty :: OutType   -- Type of the function (f e1 .. en),
                               -- presumably (arg_ty -> res_ty)
                               -- where res_ty is expected by sc_cont
      , sc_cont :: SimplCont }

  | TickIt              -- (TickIt t K)[e] = K[ tick t e ]
        CoreTickish     -- Tick tickish <hole>
        SimplCont

type StaticEnv = SimplEnv       -- Just the static part is relevant

data FromWhat = FromLet | FromBeta OutType

-- See Note [DupFlag invariants]
data DupFlag = NoDup       -- Unsimplified, might be big
             | Simplified  -- Simplified
             | OkToDup     -- Simplified and small

isSimplified :: DupFlag -> Bool
isSimplified :: DupFlag -> Bool
isSimplified DupFlag
NoDup = Bool
False
isSimplified DupFlag
_     = Bool
True       -- Invariant: the subst-env is empty

perhapsSubstTy :: DupFlag -> StaticEnv -> Type -> Type
perhapsSubstTy :: DupFlag -> StaticEnv -> OutType -> OutType
perhapsSubstTy DupFlag
dup StaticEnv
env OutType
ty
  | DupFlag -> Bool
isSimplified DupFlag
dup = OutType
ty
  | Bool
otherwise        = (() :: Constraint) => StaticEnv -> OutType -> OutType
StaticEnv -> OutType -> OutType
substTy StaticEnv
env OutType
ty

{- Note [StaticEnv invariant]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We pair up an InExpr or InAlts with a StaticEnv, which establishes the
lexical scope for that InExpr.

When we simplify that InExpr/InAlts, we use
  - Its captured StaticEnv
  - Overriding its InScopeSet with the larger one at the
    simplification point.

Why override the InScopeSet?  Example:
      (let y = ey in f) ex
By the time we simplify ex, 'y' will be in scope.

However the InScopeSet in the StaticEnv is not irrelevant: it should
include all the free vars of applying the substitution to the InExpr.
Reason: contHoleType uses perhapsSubstTy to apply the substitution to
the expression, and that (rightly) gives ASSERT failures if the InScopeSet
isn't big enough.

Note [DupFlag invariants]
~~~~~~~~~~~~~~~~~~~~~~~~~
In both ApplyToVal { se_dup = dup, se_env = env, se_cont = k}
   and  Select { se_dup = dup, se_env = env, se_cont = k}
the following invariants hold

  (a) if dup = OkToDup, then continuation k is also ok-to-dup
  (b) if dup = OkToDup or Simplified, the subst-env is empty,
               or at least is always ignored; the payload is
               already an OutThing
-}

instance Outputable DupFlag where
  ppr :: DupFlag -> SDoc
ppr DupFlag
OkToDup    = String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"ok"
  ppr DupFlag
NoDup      = String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"nodup"
  ppr DupFlag
Simplified = String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"simpl"

instance Outputable SimplCont where
  ppr :: SimplCont -> SDoc
ppr (Stop OutType
ty CallCtxt
interesting SubDemand
eval_sd)
    = String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"Stop" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc
brackets ([SDoc] -> SDoc
forall doc. IsLine doc => [doc] -> doc
sep ([SDoc] -> SDoc) -> [SDoc] -> SDoc
forall a b. (a -> b) -> a -> b
$ SDoc -> [SDoc] -> [SDoc]
forall doc. IsLine doc => doc -> [doc] -> [doc]
punctuate SDoc
forall doc. IsLine doc => doc
comma [SDoc]
pps) SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> OutType -> SDoc
forall a. Outputable a => a -> SDoc
ppr OutType
ty
    where
      pps :: [SDoc]
pps = [CallCtxt -> SDoc
forall a. Outputable a => a -> SDoc
ppr CallCtxt
interesting] [SDoc] -> [SDoc] -> [SDoc]
forall a. [a] -> [a] -> [a]
++ [SubDemand -> SDoc
forall a. Outputable a => a -> SDoc
ppr SubDemand
eval_sd | SubDemand
eval_sd SubDemand -> SubDemand -> Bool
forall a. Eq a => a -> a -> Bool
/= SubDemand
topSubDmd]
  ppr (CastIt OutCoercion
co SimplCont
cont  )    = (String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"CastIt" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> OutCoercion -> SDoc
pprOptCo OutCoercion
co) SDoc -> SDoc -> SDoc
forall doc. IsDoc doc => doc -> doc -> doc
$$ SimplCont -> SDoc
forall a. Outputable a => a -> SDoc
ppr SimplCont
cont
  ppr (TickIt CoreTickish
t SimplCont
cont)       = (String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"TickIt" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> CoreTickish -> SDoc
forall a. Outputable a => a -> SDoc
ppr CoreTickish
t) SDoc -> SDoc -> SDoc
forall doc. IsDoc doc => doc -> doc -> doc
$$ SimplCont -> SDoc
forall a. Outputable a => a -> SDoc
ppr SimplCont
cont
  ppr (ApplyToTy  { sc_arg_ty :: SimplCont -> OutType
sc_arg_ty = OutType
ty, sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
cont })
    = (String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"ApplyToTy" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> OutType -> SDoc
pprParendType OutType
ty) SDoc -> SDoc -> SDoc
forall doc. IsDoc doc => doc -> doc -> doc
$$ SimplCont -> SDoc
forall a. Outputable a => a -> SDoc
ppr SimplCont
cont
  ppr (ApplyToVal { sc_arg :: SimplCont -> OutExpr
sc_arg = OutExpr
arg, sc_dup :: SimplCont -> DupFlag
sc_dup = DupFlag
dup, sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
cont, sc_hole_ty :: SimplCont -> OutType
sc_hole_ty = OutType
hole_ty })
    = (SDoc -> BranchCount -> SDoc -> SDoc
hang (String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"ApplyToVal" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> DupFlag -> SDoc
forall a. Outputable a => a -> SDoc
ppr DupFlag
dup SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"hole" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> OutType -> SDoc
forall a. Outputable a => a -> SDoc
ppr OutType
hole_ty)
          BranchCount
2 (OutExpr -> SDoc
forall b. OutputableBndr b => Expr b -> SDoc
pprParendExpr OutExpr
arg))
      SDoc -> SDoc -> SDoc
forall doc. IsDoc doc => doc -> doc -> doc
$$ SimplCont -> SDoc
forall a. Outputable a => a -> SDoc
ppr SimplCont
cont
  ppr (StrictBind { sc_bndr :: SimplCont -> Id
sc_bndr = Id
b, sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
cont })
    = (String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"StrictBind" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> Id -> SDoc
forall a. Outputable a => a -> SDoc
ppr Id
b) SDoc -> SDoc -> SDoc
forall doc. IsDoc doc => doc -> doc -> doc
$$ SimplCont -> SDoc
forall a. Outputable a => a -> SDoc
ppr SimplCont
cont
  ppr (StrictArg { sc_fun :: SimplCont -> ArgInfo
sc_fun = ArgInfo
ai, sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
cont })
    = (String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"StrictArg" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> Id -> SDoc
forall a. Outputable a => a -> SDoc
ppr (ArgInfo -> Id
ai_fun ArgInfo
ai)) SDoc -> SDoc -> SDoc
forall doc. IsDoc doc => doc -> doc -> doc
$$ SimplCont -> SDoc
forall a. Outputable a => a -> SDoc
ppr SimplCont
cont
  ppr (Select { sc_dup :: SimplCont -> DupFlag
sc_dup = DupFlag
dup, sc_bndr :: SimplCont -> Id
sc_bndr = Id
bndr, sc_alts :: SimplCont -> [InAlt]
sc_alts = [InAlt]
alts, sc_env :: SimplCont -> StaticEnv
sc_env = StaticEnv
se, sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
cont })
    = (String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"Select" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> DupFlag -> SDoc
forall a. Outputable a => a -> SDoc
ppr DupFlag
dup SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> Id -> SDoc
forall a. Outputable a => a -> SDoc
ppr Id
bndr) SDoc -> SDoc -> SDoc
forall doc. IsDoc doc => doc -> doc -> doc
$$
       SDoc -> SDoc
forall doc. IsOutput doc => doc -> doc
whenPprDebug (BranchCount -> SDoc -> SDoc
nest BranchCount
2 (SDoc -> SDoc) -> SDoc -> SDoc
forall a b. (a -> b) -> a -> b
$ [SDoc] -> SDoc
forall doc. IsDoc doc => [doc] -> doc
vcat [TvSubstEnv -> SDoc
forall a. Outputable a => a -> SDoc
ppr (StaticEnv -> TvSubstEnv
seTvSubst StaticEnv
se), [InAlt] -> SDoc
forall a. Outputable a => a -> SDoc
ppr [InAlt]
alts]) SDoc -> SDoc -> SDoc
forall doc. IsDoc doc => doc -> doc -> doc
$$ SimplCont -> SDoc
forall a. Outputable a => a -> SDoc
ppr SimplCont
cont


{- Note [The hole type in ApplyToTy]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The sc_hole_ty field of ApplyToTy records the type of the "hole" in the
continuation.  It is absolutely necessary to compute contHoleType, but it is
not used for anything else (and hence may not be evaluated).

Why is it necessary for contHoleType?  Consider the continuation
     ApplyToType Int (Stop Int)
corresponding to
     (<hole> @Int) :: Int
What is the type of <hole>?  It could be (forall a. Int) or (forall a. a),
and there is no way to know which, so we must record it.

In a chain of applications  (f @t1 @t2 @t3) we'll lazily compute exprType
for (f @t1) and (f @t1 @t2), which is potentially non-linear; but it probably
doesn't matter because we'll never compute them all.

************************************************************************
*                                                                      *
                ArgInfo and ArgSpec
*                                                                      *
************************************************************************
-}

data ArgInfo
  = ArgInfo {
        ArgInfo -> Id
ai_fun   :: OutId,      -- The function
        ArgInfo -> [ArgSpec]
ai_args  :: [ArgSpec],  -- ...applied to these args (which are in *reverse* order)

        ArgInfo -> RewriteCall
ai_rewrite :: RewriteCall,  -- What transformation to try next for this call
             -- See Note [Rewrite rules and inlining] in GHC.Core.Opt.Simplify.Iteration

        ArgInfo -> Bool
ai_encl :: Bool,        -- Flag saying whether this function
                                -- or an enclosing one has rules (recursively)
                                --      True => be keener to inline in all args

        ArgInfo -> [Demand]
ai_dmds :: [Demand],    -- Demands on remaining value arguments (beyond ai_args)
                                --   Usually infinite, but if it is finite it guarantees
                                --   that the function diverges after being given
                                --   that number of args

        ArgInfo -> [BranchCount]
ai_discs :: [Int]       -- Discounts for remaining value arguments (beyond ai_args)
                                --   non-zero => be keener to inline
                                --   Always infinite
    }

data RewriteCall  -- What rewriting to try next for this call
                  -- See Note [Rewrite rules and inlining] in GHC.Core.Opt.Simplify.Iteration
  = TryRules FullArgCount [CoreRule]
  | TryInlining
  | TryNothing

data ArgSpec
  = ValArg { ArgSpec -> Demand
as_dmd  :: Demand        -- Demand placed on this argument
           , ArgSpec -> OutExpr
as_arg  :: OutExpr       -- Apply to this (coercion or value); c.f. ApplyToVal
           , ArgSpec -> OutType
as_hole_ty :: OutType }  -- Type of the function (presumably t1 -> t2)

  | TyArg { ArgSpec -> OutType
as_arg_ty  :: OutType     -- Apply to this type; c.f. ApplyToTy
          , as_hole_ty :: OutType }   -- Type of the function (presumably forall a. blah)

  | CastBy OutCoercion                -- Cast by this; c.f. CastIt

instance Outputable ArgInfo where
  ppr :: ArgInfo -> SDoc
ppr (ArgInfo { ai_fun :: ArgInfo -> Id
ai_fun = Id
fun, ai_args :: ArgInfo -> [ArgSpec]
ai_args = [ArgSpec]
args, ai_dmds :: ArgInfo -> [Demand]
ai_dmds = [Demand]
dmds })
    = String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"ArgInfo" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc
braces
         ([SDoc] -> SDoc
forall doc. IsLine doc => [doc] -> doc
sep [ String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"fun =" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> Id -> SDoc
forall a. Outputable a => a -> SDoc
ppr Id
fun
              , String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"dmds(first 10) =" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> [Demand] -> SDoc
forall a. Outputable a => a -> SDoc
ppr (BranchCount -> [Demand] -> [Demand]
forall a. BranchCount -> [a] -> [a]
take BranchCount
10 [Demand]
dmds)
              , String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"args =" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> [ArgSpec] -> SDoc
forall a. Outputable a => a -> SDoc
ppr [ArgSpec]
args ])

instance Outputable ArgSpec where
  ppr :: ArgSpec -> SDoc
ppr (ValArg { as_arg :: ArgSpec -> OutExpr
as_arg = OutExpr
arg })  = String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"ValArg" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> OutExpr -> SDoc
forall a. Outputable a => a -> SDoc
ppr OutExpr
arg
  ppr (TyArg { as_arg_ty :: ArgSpec -> OutType
as_arg_ty = OutType
ty }) = String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"TyArg" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> OutType -> SDoc
forall a. Outputable a => a -> SDoc
ppr OutType
ty
  ppr (CastBy OutCoercion
c)                 = String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"CastBy" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> OutCoercion -> SDoc
forall a. Outputable a => a -> SDoc
ppr OutCoercion
c

addValArgTo :: ArgInfo ->  OutExpr -> OutType -> ArgInfo
addValArgTo :: ArgInfo -> OutExpr -> OutType -> ArgInfo
addValArgTo ArgInfo
ai OutExpr
arg OutType
hole_ty
  | ArgInfo { ai_dmds :: ArgInfo -> [Demand]
ai_dmds = Demand
dmd:[Demand]
dmds, ai_discs :: ArgInfo -> [BranchCount]
ai_discs = BranchCount
_:[BranchCount]
discs, ai_rewrite :: ArgInfo -> RewriteCall
ai_rewrite = RewriteCall
rew } <- ArgInfo
ai
      -- Pop the top demand and and discounts off
  , let arg_spec :: ArgSpec
arg_spec = ValArg { as_arg :: OutExpr
as_arg = OutExpr
arg, as_hole_ty :: OutType
as_hole_ty = OutType
hole_ty, as_dmd :: Demand
as_dmd = Demand
dmd }
  = ArgInfo
ai { ai_args    = arg_spec : ai_args ai
       , ai_dmds    = dmds
       , ai_discs   = discs
       , ai_rewrite = decArgCount rew }
  | Bool
otherwise
  = String -> SDoc -> ArgInfo
forall a. HasCallStack => String -> SDoc -> a
pprPanic String
"addValArgTo" (ArgInfo -> SDoc
forall a. Outputable a => a -> SDoc
ppr ArgInfo
ai SDoc -> SDoc -> SDoc
forall doc. IsDoc doc => doc -> doc -> doc
$$ OutExpr -> SDoc
forall a. Outputable a => a -> SDoc
ppr OutExpr
arg)
    -- There should always be enough demands and discounts

addTyArgTo :: ArgInfo -> OutType -> OutType -> ArgInfo
addTyArgTo :: ArgInfo -> OutType -> OutType -> ArgInfo
addTyArgTo ArgInfo
ai OutType
arg_ty OutType
hole_ty = ArgInfo
ai { ai_args    = arg_spec : ai_args ai
                                  , ai_rewrite = decArgCount (ai_rewrite ai) }
  where
    arg_spec :: ArgSpec
arg_spec = TyArg { as_arg_ty :: OutType
as_arg_ty = OutType
arg_ty, as_hole_ty :: OutType
as_hole_ty = OutType
hole_ty }

addCastTo :: ArgInfo -> OutCoercion -> ArgInfo
addCastTo :: ArgInfo -> OutCoercion -> ArgInfo
addCastTo ArgInfo
ai OutCoercion
co = ArgInfo
ai { ai_args = CastBy co : ai_args ai }

isStrictArgInfo :: ArgInfo -> Bool
-- True if the function is strict in the next argument
isStrictArgInfo :: ArgInfo -> Bool
isStrictArgInfo (ArgInfo { ai_dmds :: ArgInfo -> [Demand]
ai_dmds = [Demand]
dmds })
  | Demand
dmd:[Demand]
_ <- [Demand]
dmds = Demand -> Bool
isStrUsedDmd Demand
dmd
  | Bool
otherwise     = Bool
False

argInfoAppArgs :: [ArgSpec] -> [OutExpr]
argInfoAppArgs :: [ArgSpec] -> [OutExpr]
argInfoAppArgs []                              = []
argInfoAppArgs (CastBy {}                : [ArgSpec]
_)  = []  -- Stop at a cast
argInfoAppArgs (ValArg { as_arg :: ArgSpec -> OutExpr
as_arg = OutExpr
arg }  : [ArgSpec]
as) = OutExpr
arg     OutExpr -> [OutExpr] -> [OutExpr]
forall a. a -> [a] -> [a]
: [ArgSpec] -> [OutExpr]
argInfoAppArgs [ArgSpec]
as
argInfoAppArgs (TyArg { as_arg_ty :: ArgSpec -> OutType
as_arg_ty = OutType
ty } : [ArgSpec]
as) = OutType -> OutExpr
forall b. OutType -> Expr b
Type OutType
ty OutExpr -> [OutExpr] -> [OutExpr]
forall a. a -> [a] -> [a]
: [ArgSpec] -> [OutExpr]
argInfoAppArgs [ArgSpec]
as

pushSimplifiedArgs, pushSimplifiedRevArgs
  :: SimplEnv
  -> [ArgSpec]   -- In normal, forward order for pushSimplifiedArgs,
                 -- in /reverse/ order for pushSimplifiedRevArgs
  -> SimplCont -> SimplCont
pushSimplifiedArgs :: StaticEnv -> [ArgSpec] -> SimplCont -> SimplCont
pushSimplifiedArgs    StaticEnv
env [ArgSpec]
args SimplCont
cont = (ArgSpec -> SimplCont -> SimplCont)
-> SimplCont -> [ArgSpec] -> SimplCont
forall a b. (a -> b -> b) -> b -> [a] -> b
forall (t :: * -> *) a b.
Foldable t =>
(a -> b -> b) -> b -> t a -> b
foldr  (StaticEnv -> ArgSpec -> SimplCont -> SimplCont
pushSimplifiedArg StaticEnv
env)             SimplCont
cont [ArgSpec]
args
pushSimplifiedRevArgs :: StaticEnv -> [ArgSpec] -> SimplCont -> SimplCont
pushSimplifiedRevArgs StaticEnv
env [ArgSpec]
args SimplCont
cont = (SimplCont -> ArgSpec -> SimplCont)
-> SimplCont -> [ArgSpec] -> SimplCont
forall b a. (b -> a -> b) -> b -> [a] -> b
forall (t :: * -> *) b a.
Foldable t =>
(b -> a -> b) -> b -> t a -> b
foldl' (\SimplCont
k ArgSpec
a -> StaticEnv -> ArgSpec -> SimplCont -> SimplCont
pushSimplifiedArg StaticEnv
env ArgSpec
a SimplCont
k) SimplCont
cont [ArgSpec]
args

pushSimplifiedArg :: SimplEnv -> ArgSpec -> SimplCont -> SimplCont
pushSimplifiedArg :: StaticEnv -> ArgSpec -> SimplCont -> SimplCont
pushSimplifiedArg StaticEnv
_env (TyArg { as_arg_ty :: ArgSpec -> OutType
as_arg_ty = OutType
arg_ty, as_hole_ty :: ArgSpec -> OutType
as_hole_ty = OutType
hole_ty }) SimplCont
cont
  = ApplyToTy  { sc_arg_ty :: OutType
sc_arg_ty = OutType
arg_ty, sc_hole_ty :: OutType
sc_hole_ty = OutType
hole_ty, sc_cont :: SimplCont
sc_cont = SimplCont
cont }
pushSimplifiedArg StaticEnv
env (ValArg { as_arg :: ArgSpec -> OutExpr
as_arg = OutExpr
arg, as_hole_ty :: ArgSpec -> OutType
as_hole_ty = OutType
hole_ty }) SimplCont
cont
  = ApplyToVal { sc_arg :: OutExpr
sc_arg = OutExpr
arg, sc_env :: StaticEnv
sc_env = StaticEnv
env, sc_dup :: DupFlag
sc_dup = DupFlag
Simplified
                 -- The SubstEnv will be ignored since sc_dup=Simplified
               , sc_hole_ty :: OutType
sc_hole_ty = OutType
hole_ty, sc_cont :: SimplCont
sc_cont = SimplCont
cont }
pushSimplifiedArg StaticEnv
_ (CastBy OutCoercion
c) SimplCont
cont = OutCoercion -> SimplCont -> SimplCont
CastIt OutCoercion
c SimplCont
cont

argInfoExpr :: OutId -> [ArgSpec] -> OutExpr
-- NB: the [ArgSpec] is reversed so that the first arg
-- in the list is the last one in the application
argInfoExpr :: Id -> [ArgSpec] -> OutExpr
argInfoExpr Id
fun [ArgSpec]
rev_args
  = [ArgSpec] -> OutExpr
go [ArgSpec]
rev_args
  where
    go :: [ArgSpec] -> OutExpr
go []                              = Id -> OutExpr
forall b. Id -> Expr b
Var Id
fun
    go (ValArg { as_arg :: ArgSpec -> OutExpr
as_arg = OutExpr
arg }  : [ArgSpec]
as) = [ArgSpec] -> OutExpr
go [ArgSpec]
as OutExpr -> OutExpr -> OutExpr
forall b. Expr b -> Expr b -> Expr b
`App` OutExpr
arg
    go (TyArg { as_arg_ty :: ArgSpec -> OutType
as_arg_ty = OutType
ty } : [ArgSpec]
as) = [ArgSpec] -> OutExpr
go [ArgSpec]
as OutExpr -> OutExpr -> OutExpr
forall b. Expr b -> Expr b -> Expr b
`App` OutType -> OutExpr
forall b. OutType -> Expr b
Type OutType
ty
    go (CastBy OutCoercion
co                : [ArgSpec]
as) = (() :: Constraint) => OutExpr -> OutCoercion -> OutExpr
OutExpr -> OutCoercion -> OutExpr
mkCast ([ArgSpec] -> OutExpr
go [ArgSpec]
as) OutCoercion
co

decArgCount :: RewriteCall -> RewriteCall
decArgCount :: RewriteCall -> RewriteCall
decArgCount (TryRules BranchCount
n [CoreRule]
rules) = BranchCount -> [CoreRule] -> RewriteCall
TryRules (BranchCount
nBranchCount -> BranchCount -> BranchCount
forall a. Num a => a -> a -> a
-BranchCount
1) [CoreRule]
rules
decArgCount RewriteCall
rew                = RewriteCall
rew

mkRewriteCall :: Id -> RuleEnv -> RewriteCall
-- See Note [Rewrite rules and inlining] in GHC.Core.Opt.Simplify.Iteration
-- We try to skip any unnecessary stages:
--    No rules     => skip TryRules
--    No unfolding => skip TryInlining
-- This skipping is "just" for efficiency.  But rebuildCall is
-- quite a heavy hammer, so skipping stages is a good plan.
-- And it's extremely simple to do.
mkRewriteCall :: Id -> RuleEnv -> RewriteCall
mkRewriteCall Id
fun RuleEnv
rule_env
  | Bool -> Bool
not ([CoreRule] -> Bool
forall a. [a] -> Bool
forall (t :: * -> *) a. Foldable t => t a -> Bool
null [CoreRule]
rules) = BranchCount -> [CoreRule] -> RewriteCall
TryRules BranchCount
n_required [CoreRule]
rules
  | Unfolding -> Bool
canUnfold Unfolding
unf    = RewriteCall
TryInlining
  | Bool
otherwise        = RewriteCall
TryNothing
  where
    n_required :: BranchCount
n_required = [BranchCount] -> BranchCount
forall a. Ord a => [a] -> a
forall (t :: * -> *) a. (Foldable t, Ord a) => t a -> a
maximum ((CoreRule -> BranchCount) -> [CoreRule] -> [BranchCount]
forall a b. (a -> b) -> [a] -> [b]
map CoreRule -> BranchCount
ruleArity [CoreRule]
rules)
    rules :: [CoreRule]
rules = RuleEnv -> Id -> [CoreRule]
getRules RuleEnv
rule_env Id
fun
    unf :: Unfolding
unf   = IdUnfoldingFun
idUnfolding Id
fun

{-
************************************************************************
*                                                                      *
                Functions on SimplCont
*                                                                      *
************************************************************************
-}

mkBoringStop :: OutType -> SimplCont
mkBoringStop :: OutType -> SimplCont
mkBoringStop OutType
ty = OutType -> CallCtxt -> SubDemand -> SimplCont
Stop OutType
ty CallCtxt
BoringCtxt SubDemand
topSubDmd

mkRhsStop :: OutType -> RecFlag -> Demand -> SimplCont
-- See Note [RHS of lets] in GHC.Core.Unfold
mkRhsStop :: OutType -> RecFlag -> Demand -> SimplCont
mkRhsStop OutType
ty RecFlag
is_rec Demand
bndr_dmd = OutType -> CallCtxt -> SubDemand -> SimplCont
Stop OutType
ty (RecFlag -> CallCtxt
RhsCtxt RecFlag
is_rec) (Demand -> SubDemand
subDemandIfEvaluated Demand
bndr_dmd)

mkLazyArgStop :: OutType -> ArgInfo -> SimplCont
mkLazyArgStop :: OutType -> ArgInfo -> SimplCont
mkLazyArgStop OutType
ty ArgInfo
fun_info = OutType -> CallCtxt -> SubDemand -> SimplCont
Stop OutType
ty (ArgInfo -> CallCtxt
lazyArgContext ArgInfo
fun_info) SubDemand
arg_sd
  where
    arg_sd :: SubDemand
arg_sd = Demand -> SubDemand
subDemandIfEvaluated ([Demand] -> Demand
forall a. HasCallStack => [a] -> a
Partial.head (ArgInfo -> [Demand]
ai_dmds ArgInfo
fun_info))

-------------------
contIsRhs :: SimplCont -> Maybe RecFlag
contIsRhs :: SimplCont -> Maybe RecFlag
contIsRhs (Stop OutType
_ (RhsCtxt RecFlag
is_rec) SubDemand
_) = RecFlag -> Maybe RecFlag
forall a. a -> Maybe a
Just RecFlag
is_rec
contIsRhs (CastIt OutCoercion
_ SimplCont
k)                = SimplCont -> Maybe RecFlag
contIsRhs SimplCont
k   -- For f = e |> co, treat e as Rhs context
contIsRhs SimplCont
_                           = Maybe RecFlag
forall a. Maybe a
Nothing

-------------------
contIsStop :: SimplCont -> Bool
contIsStop :: SimplCont -> Bool
contIsStop (Stop {}) = Bool
True
contIsStop SimplCont
_         = Bool
False

contIsDupable :: SimplCont -> Bool
contIsDupable :: SimplCont -> Bool
contIsDupable (Stop {})                         = Bool
True
contIsDupable (ApplyToTy  { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k })      = SimplCont -> Bool
contIsDupable SimplCont
k
contIsDupable (ApplyToVal { sc_dup :: SimplCont -> DupFlag
sc_dup = DupFlag
OkToDup }) = Bool
True -- See Note [DupFlag invariants]
contIsDupable (Select { sc_dup :: SimplCont -> DupFlag
sc_dup = DupFlag
OkToDup })     = Bool
True -- ...ditto...
contIsDupable (StrictArg { sc_dup :: SimplCont -> DupFlag
sc_dup = DupFlag
OkToDup })  = Bool
True -- ...ditto...
contIsDupable (CastIt OutCoercion
_ SimplCont
k)                      = SimplCont -> Bool
contIsDupable SimplCont
k
contIsDupable SimplCont
_                                 = Bool
False

-------------------
contIsTrivial :: SimplCont -> Bool
contIsTrivial :: SimplCont -> Bool
contIsTrivial (Stop {})                                         = Bool
True
contIsTrivial (ApplyToTy { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k })                       = SimplCont -> Bool
contIsTrivial SimplCont
k
-- This one doesn't look right.  A value application is not trivial
-- contIsTrivial (ApplyToVal { sc_arg = Coercion _, sc_cont = k }) = contIsTrivial k
contIsTrivial (CastIt OutCoercion
_ SimplCont
k)                                      = SimplCont -> Bool
contIsTrivial SimplCont
k
contIsTrivial SimplCont
_                                                 = Bool
False

-------------------
contResultType :: SimplCont -> OutType
contResultType :: SimplCont -> OutType
contResultType (Stop OutType
ty CallCtxt
_ SubDemand
_)                = OutType
ty
contResultType (CastIt OutCoercion
_ SimplCont
k)                 = SimplCont -> OutType
contResultType SimplCont
k
contResultType (StrictBind { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k }) = SimplCont -> OutType
contResultType SimplCont
k
contResultType (StrictArg { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k })  = SimplCont -> OutType
contResultType SimplCont
k
contResultType (Select { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k })     = SimplCont -> OutType
contResultType SimplCont
k
contResultType (ApplyToTy  { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k }) = SimplCont -> OutType
contResultType SimplCont
k
contResultType (ApplyToVal { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k }) = SimplCont -> OutType
contResultType SimplCont
k
contResultType (TickIt CoreTickish
_ SimplCont
k)                 = SimplCont -> OutType
contResultType SimplCont
k

contHoleType :: SimplCont -> OutType
contHoleType :: SimplCont -> OutType
contHoleType (Stop OutType
ty CallCtxt
_ SubDemand
_)                    = OutType
ty
contHoleType (TickIt CoreTickish
_ SimplCont
k)                     = SimplCont -> OutType
contHoleType SimplCont
k
contHoleType (CastIt OutCoercion
co SimplCont
_)                    = OutCoercion -> OutType
coercionLKind OutCoercion
co
contHoleType (StrictBind { sc_bndr :: SimplCont -> Id
sc_bndr = Id
b, sc_dup :: SimplCont -> DupFlag
sc_dup = DupFlag
dup, sc_env :: SimplCont -> StaticEnv
sc_env = StaticEnv
se })
  = DupFlag -> StaticEnv -> OutType -> OutType
perhapsSubstTy DupFlag
dup StaticEnv
se (Id -> OutType
idType Id
b)
contHoleType (StrictArg  { sc_fun_ty :: SimplCont -> OutType
sc_fun_ty = OutType
ty })  = OutType -> OutType
funArgTy OutType
ty
contHoleType (ApplyToTy  { sc_hole_ty :: SimplCont -> OutType
sc_hole_ty = OutType
ty }) = OutType
ty  -- See Note [The hole type in ApplyToTy]
contHoleType (ApplyToVal { sc_hole_ty :: SimplCont -> OutType
sc_hole_ty = OutType
ty }) = OutType
ty  -- See Note [The hole type in ApplyToTy]
contHoleType (Select { sc_dup :: SimplCont -> DupFlag
sc_dup = DupFlag
d, sc_bndr :: SimplCont -> Id
sc_bndr =  Id
b, sc_env :: SimplCont -> StaticEnv
sc_env = StaticEnv
se })
  = DupFlag -> StaticEnv -> OutType -> OutType
perhapsSubstTy DupFlag
d StaticEnv
se (Id -> OutType
idType Id
b)


-- Computes the multiplicity scaling factor at the hole. That is, in (case [] of
-- x ::(p) _ { … }) (respectively for arguments of functions), the scaling
-- factor is p. And in E[G[]], the scaling factor is the product of the scaling
-- factor of E and that of G.
--
-- The scaling factor at the hole of E[] is used to determine how a binder
-- should be scaled if it commutes with E. This appears, in particular, in the
-- case-of-case transformation.
contHoleScaling :: SimplCont -> Mult
contHoleScaling :: SimplCont -> OutType
contHoleScaling (Stop OutType
_ CallCtxt
_ SubDemand
_) = OutType
OneTy
contHoleScaling (CastIt OutCoercion
_ SimplCont
k) = SimplCont -> OutType
contHoleScaling SimplCont
k
contHoleScaling (StrictBind { sc_bndr :: SimplCont -> Id
sc_bndr = Id
id, sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k })
  = Id -> OutType
idMult Id
id OutType -> OutType -> OutType
`mkMultMul` SimplCont -> OutType
contHoleScaling SimplCont
k
contHoleScaling (Select { sc_bndr :: SimplCont -> Id
sc_bndr = Id
id, sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k })
  = Id -> OutType
idMult Id
id OutType -> OutType -> OutType
`mkMultMul` SimplCont -> OutType
contHoleScaling SimplCont
k
contHoleScaling (StrictArg { sc_fun_ty :: SimplCont -> OutType
sc_fun_ty = OutType
fun_ty, sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k })
  = OutType
w OutType -> OutType -> OutType
`mkMultMul` SimplCont -> OutType
contHoleScaling SimplCont
k
  where
    (OutType
w, OutType
_, OutType
_) = OutType -> (OutType, OutType, OutType)
splitFunTy OutType
fun_ty
contHoleScaling (ApplyToTy { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k }) = SimplCont -> OutType
contHoleScaling SimplCont
k
contHoleScaling (ApplyToVal { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k }) = SimplCont -> OutType
contHoleScaling SimplCont
k
contHoleScaling (TickIt CoreTickish
_ SimplCont
k) = SimplCont -> OutType
contHoleScaling SimplCont
k

-------------------
countArgs :: SimplCont -> Int
-- Count all arguments, including types, coercions,
-- and other values; skipping over casts.
countArgs :: SimplCont -> BranchCount
countArgs (ApplyToTy  { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
cont }) = BranchCount
1 BranchCount -> BranchCount -> BranchCount
forall a. Num a => a -> a -> a
+ SimplCont -> BranchCount
countArgs SimplCont
cont
countArgs (ApplyToVal { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
cont }) = BranchCount
1 BranchCount -> BranchCount -> BranchCount
forall a. Num a => a -> a -> a
+ SimplCont -> BranchCount
countArgs SimplCont
cont
countArgs (CastIt OutCoercion
_ SimplCont
cont)                 = SimplCont -> BranchCount
countArgs SimplCont
cont
countArgs SimplCont
_                               = BranchCount
0

countValArgs :: SimplCont -> Int
-- Count value arguments only
countValArgs :: SimplCont -> BranchCount
countValArgs (ApplyToTy  { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
cont }) = SimplCont -> BranchCount
countValArgs SimplCont
cont
countValArgs (ApplyToVal { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
cont }) = BranchCount
1 BranchCount -> BranchCount -> BranchCount
forall a. Num a => a -> a -> a
+ SimplCont -> BranchCount
countValArgs SimplCont
cont
countValArgs (CastIt OutCoercion
_ SimplCont
cont)                 = SimplCont -> BranchCount
countValArgs SimplCont
cont
countValArgs SimplCont
_                               = BranchCount
0

-------------------
contArgs :: SimplCont -> (Bool, [ArgSummary], SimplCont)
-- Summarises value args, discards type args and coercions
-- The returned continuation of the call is only used to
-- answer questions like "are you interesting?"
contArgs :: SimplCont -> (Bool, [ArgSummary], SimplCont)
contArgs SimplCont
cont
  | SimplCont -> Bool
lone SimplCont
cont = (Bool
True, [], SimplCont
cont)
  | Bool
otherwise = [ArgSummary] -> SimplCont -> (Bool, [ArgSummary], SimplCont)
go [] SimplCont
cont
  where
    lone :: SimplCont -> Bool
lone (ApplyToTy  {}) = Bool
False  -- See Note [Lone variables] in GHC.Core.Unfold
    lone (ApplyToVal {}) = Bool
False  -- NB: even a type application or cast
    lone (CastIt {})     = Bool
False  --     stops it being "lone"
    lone SimplCont
_               = Bool
True

    go :: [ArgSummary] -> SimplCont -> (Bool, [ArgSummary], SimplCont)
go [ArgSummary]
args (ApplyToVal { sc_arg :: SimplCont -> OutExpr
sc_arg = OutExpr
arg, sc_env :: SimplCont -> StaticEnv
sc_env = StaticEnv
se, sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k })
                                        = [ArgSummary] -> SimplCont -> (Bool, [ArgSummary], SimplCont)
go (OutExpr -> StaticEnv -> ArgSummary
is_interesting OutExpr
arg StaticEnv
se ArgSummary -> [ArgSummary] -> [ArgSummary]
forall a. a -> [a] -> [a]
: [ArgSummary]
args) SimplCont
k
    go [ArgSummary]
args (ApplyToTy { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k }) = [ArgSummary] -> SimplCont -> (Bool, [ArgSummary], SimplCont)
go [ArgSummary]
args SimplCont
k
    go [ArgSummary]
args (CastIt OutCoercion
_ SimplCont
k)                = [ArgSummary] -> SimplCont -> (Bool, [ArgSummary], SimplCont)
go [ArgSummary]
args SimplCont
k
    go [ArgSummary]
args SimplCont
k                           = (Bool
False, [ArgSummary] -> [ArgSummary]
forall a. [a] -> [a]
reverse [ArgSummary]
args, SimplCont
k)

    is_interesting :: OutExpr -> StaticEnv -> ArgSummary
is_interesting OutExpr
arg StaticEnv
se = StaticEnv -> OutExpr -> ArgSummary
interestingArg StaticEnv
se OutExpr
arg
                   -- Do *not* use short-cutting substitution here
                   -- because we want to get as much IdInfo as possible

-- | Describes how the 'SimplCont' will evaluate the hole as a 'SubDemand'.
-- This can be more insightful than the limited syntactic context that
-- 'SimplCont' provides, because the 'Stop' constructor might carry a useful
-- 'SubDemand'.
-- For example, when simplifying the argument `e` in `f e` and `f` has the
-- demand signature `<MP(S,A)>`, this function will give you back `P(S,A)` when
-- simplifying `e`.
--
-- PRECONDITION: Don't call with 'ApplyToVal'. We haven't thoroughly thought
-- about what to do then and no call sites so far seem to care.
contEvalContext :: SimplCont -> SubDemand
contEvalContext :: SimplCont -> SubDemand
contEvalContext SimplCont
k = case SimplCont
k of
  (Stop OutType
_ CallCtxt
_ SubDemand
sd)              -> SubDemand
sd
  (TickIt CoreTickish
_ SimplCont
k)               -> SimplCont -> SubDemand
contEvalContext SimplCont
k
  (CastIt OutCoercion
_ SimplCont
k)               -> SimplCont -> SubDemand
contEvalContext SimplCont
k
  ApplyToTy{sc_cont :: SimplCont -> SimplCont
sc_cont=SimplCont
k}       -> SimplCont -> SubDemand
contEvalContext SimplCont
k
    --  ApplyToVal{sc_cont=k}      -> mkCalledOnceDmd $ contEvalContext k
    -- Not 100% sure that's correct, . Here's an example:
    --   f (e x) and f :: <SC(S,C(1,L))>
    -- then what is the evaluation context of 'e' when we simplify it? E.g.,
    --   simpl e (ApplyToVal x $ Stop "C(S,C(1,L))")
    -- then it *should* be "C(1,C(S,C(1,L))", so perhaps correct after all.
    -- But for now we just panic:
  ApplyToVal{}               -> String -> SDoc -> SubDemand
forall a. HasCallStack => String -> SDoc -> a
pprPanic String
"contEvalContext" (SimplCont -> SDoc
forall a. Outputable a => a -> SDoc
ppr SimplCont
k)
  StrictArg{sc_fun :: SimplCont -> ArgInfo
sc_fun=ArgInfo
fun_info} -> Demand -> SubDemand
subDemandIfEvaluated ([Demand] -> Demand
forall a. HasCallStack => [a] -> a
Partial.head (ArgInfo -> [Demand]
ai_dmds ArgInfo
fun_info))
  StrictBind{sc_bndr :: SimplCont -> Id
sc_bndr=Id
bndr}   -> Demand -> SubDemand
subDemandIfEvaluated (Id -> Demand
idDemandInfo Id
bndr)
  Select{}                   -> SubDemand
topSubDmd
    -- Perhaps reconstruct the demand on the scrutinee by looking at field
    -- and case binder dmds, see addCaseBndrDmd. No priority right now.

-------------------
mkArgInfo :: SimplEnv -> RuleEnv -> Id -> SimplCont -> ArgInfo

mkArgInfo :: StaticEnv -> RuleEnv -> Id -> SimplCont -> ArgInfo
mkArgInfo StaticEnv
env RuleEnv
rule_base Id
fun SimplCont
cont
  | BranchCount
n_val_args BranchCount -> BranchCount -> Bool
forall a. Ord a => a -> a -> Bool
< Id -> BranchCount
idArity Id
fun            -- Note [Unsaturated functions]
  = ArgInfo { ai_fun :: Id
ai_fun = Id
fun, ai_args :: [ArgSpec]
ai_args = []
            , ai_rewrite :: RewriteCall
ai_rewrite = RewriteCall
fun_rewrite
            , ai_encl :: Bool
ai_encl = Bool
False
            , ai_dmds :: [Demand]
ai_dmds = [Demand]
vanilla_dmds
            , ai_discs :: [BranchCount]
ai_discs = [BranchCount]
vanilla_discounts }
  | Bool
otherwise
  = ArgInfo { ai_fun :: Id
ai_fun   = Id
fun
            , ai_args :: [ArgSpec]
ai_args  = []
            , ai_rewrite :: RewriteCall
ai_rewrite = RewriteCall
fun_rewrite
            , ai_encl :: Bool
ai_encl  = Bool
fun_has_rules Bool -> Bool -> Bool
|| SimplCont -> Bool
contHasRules SimplCont
cont
            , ai_dmds :: [Demand]
ai_dmds  = OutType -> [Demand] -> [Demand]
add_type_strictness (Id -> OutType
idType Id
fun) [Demand]
arg_dmds
            , ai_discs :: [BranchCount]
ai_discs = [BranchCount]
arg_discounts }
  where
    n_val_args :: BranchCount
n_val_args    = SimplCont -> BranchCount
countValArgs SimplCont
cont
    fun_rewrite :: RewriteCall
fun_rewrite   = Id -> RuleEnv -> RewriteCall
mkRewriteCall Id
fun RuleEnv
rule_base
    fun_has_rules :: Bool
fun_has_rules = case RewriteCall
fun_rewrite of
                      TryRules {} -> Bool
True
                      RewriteCall
_           -> Bool
False

    vanilla_discounts, arg_discounts :: [Int]
    vanilla_discounts :: [BranchCount]
vanilla_discounts = BranchCount -> [BranchCount]
forall a. a -> [a]
repeat BranchCount
0
    arg_discounts :: [BranchCount]
arg_discounts = case IdUnfoldingFun
idUnfolding Id
fun of
                        CoreUnfolding {uf_guidance :: Unfolding -> UnfoldingGuidance
uf_guidance = UnfIfGoodArgs {ug_args :: UnfoldingGuidance -> [BranchCount]
ug_args = [BranchCount]
discounts}}
                              -> [BranchCount]
discounts [BranchCount] -> [BranchCount] -> [BranchCount]
forall a. [a] -> [a] -> [a]
++ [BranchCount]
vanilla_discounts
                        Unfolding
_     -> [BranchCount]
vanilla_discounts

    vanilla_dmds, arg_dmds :: [Demand]
    vanilla_dmds :: [Demand]
vanilla_dmds  = Demand -> [Demand]
forall a. a -> [a]
repeat Demand
topDmd

    arg_dmds :: [Demand]
arg_dmds
      | Bool -> Bool
not (StaticEnv -> Bool
seInline StaticEnv
env)
      = [Demand]
vanilla_dmds -- See Note [Do not expose strictness if sm_inline=False]
      | Bool
otherwise
      = -- add_type_str fun_ty $
        case DmdSig -> ([Demand], Divergence)
splitDmdSig (Id -> DmdSig
idDmdSig Id
fun) of
          ([Demand]
demands, Divergence
result_info)
                | Bool -> Bool
not ([Demand]
demands [Demand] -> BranchCount -> Bool
forall a. [a] -> BranchCount -> Bool
`lengthExceeds` BranchCount
n_val_args)
                ->      -- Enough args, use the strictness given.
                        -- For bottoming functions we used to pretend that the arg
                        -- is lazy, so that we don't treat the arg as an
                        -- interesting context.  This avoids substituting
                        -- top-level bindings for (say) strings into
                        -- calls to error.  But now we are more careful about
                        -- inlining lone variables, so its ok
                        -- (see GHC.Core.Op.Simplify.Utils.analyseCont)
                   if Divergence -> Bool
isDeadEndDiv Divergence
result_info then
                        [Demand]
demands  -- Finite => result is bottom
                   else
                        [Demand]
demands [Demand] -> [Demand] -> [Demand]
forall a. [a] -> [a] -> [a]
++ [Demand]
vanilla_dmds
               | Bool
otherwise
               -> Bool -> String -> SDoc -> [Demand] -> [Demand]
forall a. HasCallStack => Bool -> String -> SDoc -> a -> a
warnPprTrace Bool
True String
"More demands than arity" (Id -> SDoc
forall a. Outputable a => a -> SDoc
ppr Id
fun SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> BranchCount -> SDoc
forall a. Outputable a => a -> SDoc
ppr (Id -> BranchCount
idArity Id
fun)
                                SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> BranchCount -> SDoc
forall a. Outputable a => a -> SDoc
ppr BranchCount
n_val_args SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> [Demand] -> SDoc
forall a. Outputable a => a -> SDoc
ppr [Demand]
demands) ([Demand] -> [Demand]) -> [Demand] -> [Demand]
forall a b. (a -> b) -> a -> b
$
                  [Demand]
vanilla_dmds      -- Not enough args, or no strictness

    add_type_strictness :: Type -> [Demand] -> [Demand]
    -- If the function arg types are strict, record that in the 'strictness bits'
    -- No need to instantiate because unboxed types (which dominate the strict
    --   types) can't instantiate type variables.
    -- add_type_strictness is done repeatedly (for each call);
    --   might be better once-for-all in the function
    -- But beware primops/datacons with no strictness

    add_type_strictness :: OutType -> [Demand] -> [Demand]
add_type_strictness OutType
fun_ty [Demand]
dmds
      | [Demand] -> Bool
forall a. [a] -> Bool
forall (t :: * -> *) a. Foldable t => t a -> Bool
null [Demand]
dmds = []

      | Just (Id
_, OutType
fun_ty') <- OutType -> Maybe (Id, OutType)
splitForAllTyCoVar_maybe OutType
fun_ty
      = OutType -> [Demand] -> [Demand]
add_type_strictness OutType
fun_ty' [Demand]
dmds     -- Look through foralls

      | Just (FunTyFlag
_, OutType
_, OutType
arg_ty, OutType
fun_ty') <- OutType -> Maybe (FunTyFlag, OutType, OutType, OutType)
splitFunTy_maybe OutType
fun_ty        -- Add strict-type info
      , Demand
dmd : [Demand]
rest_dmds <- [Demand]
dmds
      , let dmd' :: Demand
dmd'
             | OutType -> Bool
definitelyUnliftedType OutType
arg_ty
             = Demand -> Demand
strictifyDmd Demand
dmd
             | Bool
otherwise
             -- Something that's not definitely unlifted.
             -- If the type is representation-polymorphic, we can't know whether
             -- it's strict.
             = Demand
dmd
      = Demand
dmd' Demand -> [Demand] -> [Demand]
forall a. a -> [a] -> [a]
: OutType -> [Demand] -> [Demand]
add_type_strictness OutType
fun_ty' [Demand]
rest_dmds

      | Bool
otherwise
      = [Demand]
dmds

{- Note [Unsaturated functions]
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Consider (test eyeball/inline4)
        x = a:as
        y = f x
where f has arity 2.  Then we do not want to inline 'x', because
it'll just be floated out again.  Even if f has lots of discounts
on its first argument -- it must be saturated for these to kick in

Note [Do not expose strictness if sm_inline=False]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#15163 showed a case in which we had

  {-# INLINE [1] zip #-}
  zip = undefined

  {-# RULES "foo" forall as bs. stream (zip as bs) = ..blah... #-}

If we expose zip's bottoming nature when simplifying the LHS of the
RULE we get
  {-# RULES "foo" forall as bs.
                   stream (case zip of {}) = ..blah... #-}
discarding the arguments to zip.  Usually this is fine, but on the
LHS of a rule it's not, because 'as' and 'bs' are now not bound on
the LHS.

This is a pretty pathological example, so I'm not losing sleep over
it, but the simplest solution was to check sm_inline; if it is False,
which it is on the LHS of a rule (see updModeForRules), then don't
make use of the strictness info for the function.
-}


{-
************************************************************************
*                                                                      *
        Interesting arguments
*                                                                      *
************************************************************************

Note [Interesting call context]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We want to avoid inlining an expression where there can't possibly be
any gain, such as in an argument position.  Hence, if the continuation
is interesting (eg. a case scrutinee that isn't just a seq, application etc.)
then we inline, otherwise we don't.

Previously some_benefit used to return True only if the variable was
applied to some value arguments.  This didn't work:

        let x = _coerce_ (T Int) Int (I# 3) in
        case _coerce_ Int (T Int) x of
                I# y -> ....

we want to inline x, but can't see that it's a constructor in a case
scrutinee position, and some_benefit is False.

Another example:

dMonadST = _/\_ t -> :Monad (g1 _@_ t, g2 _@_ t, g3 _@_ t)

....  case dMonadST _@_ x0 of (a,b,c) -> ....

we'd really like to inline dMonadST here, but we *don't* want to
inline if the case expression is just

        case x of y { DEFAULT -> ... }

since we can just eliminate this case instead (x is in WHNF).  Similar
applies when x is bound to a lambda expression.  Hence
contIsInteresting looks for case expressions with just a single
default case.

Note [No case of case is boring]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If we see
   case f x of <alts>

we'd usually treat the context as interesting, to encourage 'f' to
inline.  But if case-of-case is off, it's really not so interesting
after all, because we are unlikely to be able to push the case
expression into the branches of any case in f's unfolding.  So, to
reduce unnecessary code expansion, we just make the context look boring.
This made a small compile-time perf improvement in perf/compiler/T6048,
and it looks plausible to me.

Note [Seq is boring]
~~~~~~~~~~~~~~~~~~~~
Suppose
  f x = case v of
          True  -> Just x
          False -> Just (x-1)

Now consider these cases:

1. case f x of b{-dead-} { DEFAULT -> blah[no b] }
     Inlining (f x) will allow us to avoid ever allocating (Just x),
     since the case binder `b` is dead.  We will end up with a
     join point for blah, thus
         join j = blah in
         case v of { True -> j; False -> j }
     which will turn into (case v of DEFAULT -> blah
     All good

2. case f x of b { DEFAULT -> blah[b] }
     Inlining (f x) will still mean we allocate (Just x). We'd get:
         join j b = blah[b]
         case v of { True -> j (Just x); False -> j (Just (x-1)) }
     No new optimisations are revealed. Nothing is gained.
     (This is the situation in T22317.)

2a. case g x of b { (x{-dead-}, x{-dead-}) -> blah[b, no x, no y] }
      Instead of DEFAULT we have a single constructor alternative
      with all dead binders.  This is just a variant of (2); no
      gain from inlining (f x)

3. case f x of b { Just y -> blah[y,b] }
     Inlining (f x) will mean we still allocate (Just x),
     but we also get to bind `y` without fetching it out of the Just, thus
         join j y b = blah[y,b]
         case v of { True -> j x (Just x)
                   ; False -> let y = x-1 in j y (Just y) }
   Inlining (f x) has a small benefit, perhaps.
   (To T14955 it makes a surprisingly large difference of ~30% to inline here.)


Conclusion: if the case expression
  * Has a non-dead case-binder
  * Has one alternative
  * All the binders in the alternative are dead
then the `case` is just a strict let-binding, and the scrutinee is
BoringCtxt (don't inline).  Otherwise CaseCtxt.
-}

lazyArgContext :: ArgInfo -> CallCtxt
-- Use this for lazy arguments
lazyArgContext :: ArgInfo -> CallCtxt
lazyArgContext (ArgInfo { ai_encl :: ArgInfo -> Bool
ai_encl = Bool
encl_rules, ai_discs :: ArgInfo -> [BranchCount]
ai_discs = [BranchCount]
discs })
  | Bool
encl_rules                = CallCtxt
RuleArgCtxt
  | BranchCount
disc:[BranchCount]
_ <- [BranchCount]
discs, BranchCount
disc BranchCount -> BranchCount -> Bool
forall a. Ord a => a -> a -> Bool
> BranchCount
0 = CallCtxt
DiscArgCtxt  -- Be keener here
  | Bool
otherwise                 = CallCtxt
BoringCtxt   -- Nothing interesting

strictArgContext :: ArgInfo -> CallCtxt
strictArgContext :: ArgInfo -> CallCtxt
strictArgContext (ArgInfo { ai_encl :: ArgInfo -> Bool
ai_encl = Bool
encl_rules, ai_discs :: ArgInfo -> [BranchCount]
ai_discs = [BranchCount]
discs })
-- Use this for strict arguments
  | Bool
encl_rules                = CallCtxt
RuleArgCtxt
  | BranchCount
disc:[BranchCount]
_ <- [BranchCount]
discs, BranchCount
disc BranchCount -> BranchCount -> Bool
forall a. Ord a => a -> a -> Bool
> BranchCount
0 = CallCtxt
DiscArgCtxt  -- Be keener here
  | Bool
otherwise                 = RecFlag -> CallCtxt
RhsCtxt RecFlag
NonRecursive
      -- Why RhsCtxt?  if we see f (g x), and f is strict, we
      -- want to be a bit more eager to inline g, because it may
      -- expose an eval (on x perhaps) that can be eliminated or
      -- shared. I saw this in nofib 'boyer2', RewriteFuns.onewayunify1
      -- It's worth an 18% improvement in allocation for this
      -- particular benchmark; 5% on 'mate' and 1.3% on 'multiplier'
      --
      -- Why NonRecursive?  Becuase it's a bit like
      --   let a = g x in f a

interestingCallContext :: SimplEnv -> SimplCont -> CallCtxt
-- See Note [Interesting call context]
interestingCallContext :: StaticEnv -> SimplCont -> CallCtxt
interestingCallContext StaticEnv
env SimplCont
cont
  = SimplCont -> CallCtxt
interesting SimplCont
cont
  where
    interesting :: SimplCont -> CallCtxt
interesting (Select {sc_alts :: SimplCont -> [InAlt]
sc_alts=[InAlt]
alts, sc_bndr :: SimplCont -> Id
sc_bndr=Id
case_bndr})
      | Bool -> Bool
not (StaticEnv -> Bool
seCaseCase StaticEnv
env)         = CallCtxt
BoringCtxt -- See Note [No case of case is boring]
      | [Alt AltCon
_ [Id]
bs OutExpr
_] <- [InAlt]
alts
      , (Id -> Bool) -> [Id] -> Bool
forall (t :: * -> *) a. Foldable t => (a -> Bool) -> t a -> Bool
all Id -> Bool
isDeadBinder [Id]
bs
      , Bool -> Bool
not (Id -> Bool
isDeadBinder Id
case_bndr) = CallCtxt
BoringCtxt -- See Note [Seq is boring]
      | Bool
otherwise                    = CallCtxt
CaseCtxt


    interesting (ApplyToVal {}) = CallCtxt
ValAppCtxt
        -- Can happen if we have (f Int |> co) y
        -- If f has an INLINE prag we need to give it some
        -- motivation to inline. See Note [Cast then apply]
        -- in GHC.Core.Unfold

    interesting (StrictArg { sc_fun :: SimplCont -> ArgInfo
sc_fun = ArgInfo
fun }) = ArgInfo -> CallCtxt
strictArgContext ArgInfo
fun
    interesting (StrictBind {})              = CallCtxt
BoringCtxt
    interesting (Stop OutType
_ CallCtxt
cci SubDemand
_)               = CallCtxt
cci
    interesting (TickIt CoreTickish
_ SimplCont
k)                 = SimplCont -> CallCtxt
interesting SimplCont
k
    interesting (ApplyToTy { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
k })  = SimplCont -> CallCtxt
interesting SimplCont
k
    interesting (CastIt OutCoercion
_ SimplCont
k)                 = SimplCont -> CallCtxt
interesting SimplCont
k
        -- If this call is the arg of a strict function, the context
        -- is a bit interesting.  If we inline here, we may get useful
        -- evaluation information to avoid repeated evals: e.g.
        --      x + (y * z)
        -- Here the contIsInteresting makes the '*' keener to inline,
        -- which in turn exposes a constructor which makes the '+' inline.
        -- Assuming that +,* aren't small enough to inline regardless.
        --
        -- It's also very important to inline in a strict context for things
        -- like
        --              foldr k z (f x)
        -- Here, the context of (f x) is strict, and if f's unfolding is
        -- a build it's *great* to inline it here.  So we must ensure that
        -- the context for (f x) is not totally uninteresting.

contHasRules :: SimplCont -> Bool
-- If the argument has form (f x y), where x,y are boring,
-- and f is marked INLINE, then we don't want to inline f.
-- But if the context of the argument is
--      g (f x y)
-- where g has rules, then we *do* want to inline f, in case it
-- exposes a rule that might fire.  Similarly, if the context is
--      h (g (f x x))
-- where h has rules, then we do want to inline f.  So contHasRules
-- tries to see if the context of the f-call is a call to a function
-- with rules.
--
-- The ai_encl flag makes this happen; if it's
-- set, the inliner gets just enough keener to inline f
-- regardless of how boring f's arguments are, if it's marked INLINE
--
-- The alternative would be to *always* inline an INLINE function,
-- regardless of how boring its context is; but that seems overkill
-- For example, it'd mean that wrapper functions were always inlined
contHasRules :: SimplCont -> Bool
contHasRules SimplCont
cont
  = SimplCont -> Bool
go SimplCont
cont
  where
    go :: SimplCont -> Bool
go (ApplyToVal { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
cont }) = SimplCont -> Bool
go SimplCont
cont
    go (ApplyToTy  { sc_cont :: SimplCont -> SimplCont
sc_cont = SimplCont
cont }) = SimplCont -> Bool
go SimplCont
cont
    go (CastIt OutCoercion
_ SimplCont
cont)                 = SimplCont -> Bool
go SimplCont
cont
    go (StrictArg { sc_fun :: SimplCont -> ArgInfo
sc_fun = ArgInfo
fun })    = ArgInfo -> Bool
ai_encl ArgInfo
fun
    go (Stop OutType
_ CallCtxt
RuleArgCtxt SubDemand
_)          = Bool
True
    go (TickIt CoreTickish
_ SimplCont
c)                    = SimplCont -> Bool
go SimplCont
c
    go (Select {})                     = Bool
False
    go (StrictBind {})                 = Bool
False      -- ??
    go (Stop OutType
_ CallCtxt
_ SubDemand
_)                    = Bool
False

{- Note [Interesting arguments]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
An argument is interesting if it deserves a discount for unfoldings
with a discount in that argument position.  The idea is to avoid
unfolding a function that is applied only to variables that have no
unfolding (i.e. they are probably lambda bound): f x y z There is
little point in inlining f here.

Generally, *values* (like (C a b) and (\x.e)) deserve discounts.  But
we must look through lets, eg (let x = e in C a b), because the let will
float, exposing the value, if we inline.  That makes it different to
exprIsHNF.

Before 2009 we said it was interesting if the argument had *any* structure
at all; i.e. (hasSomeUnfolding v).  But does too much inlining; see #3016.

But we don't regard (f x y) as interesting, unless f is unsaturated.
If it's saturated and f hasn't inlined, then it's probably not going
to now!

Note [Conlike is interesting]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Consider
        f d = ...((*) d x y)...
        ... f (df d')...
where df is con-like. Then we'd really like to inline 'f' so that the
rule for (*) (df d) can fire.  To do this
  a) we give a discount for being an argument of a class-op (eg (*) d)
  b) we say that a con-like argument (eg (df d)) is interesting
-}

interestingArg :: SimplEnv -> CoreExpr -> ArgSummary
-- See Note [Interesting arguments]
interestingArg :: StaticEnv -> OutExpr -> ArgSummary
interestingArg StaticEnv
env OutExpr
e = StaticEnv -> BranchCount -> OutExpr -> ArgSummary
go StaticEnv
env BranchCount
0 OutExpr
e
  where
    -- n is # value args to which the expression is applied
    go :: StaticEnv -> BranchCount -> OutExpr -> ArgSummary
go StaticEnv
env BranchCount
n (Var Id
v)
       = case StaticEnv -> Id -> SimplSR
substId StaticEnv
env Id
v of
           DoneId Id
v'            -> BranchCount -> Id -> ArgSummary
go_var BranchCount
n Id
v'
           DoneEx OutExpr
e Maybe BranchCount
_           -> StaticEnv -> BranchCount -> OutExpr -> ArgSummary
go (StaticEnv -> StaticEnv
zapSubstEnv StaticEnv
env)             BranchCount
n OutExpr
e
           ContEx TvSubstEnv
tvs CvSubstEnv
cvs SimplIdSubst
ids OutExpr
e -> StaticEnv -> BranchCount -> OutExpr -> ArgSummary
go (StaticEnv -> TvSubstEnv -> CvSubstEnv -> SimplIdSubst -> StaticEnv
setSubstEnv StaticEnv
env TvSubstEnv
tvs CvSubstEnv
cvs SimplIdSubst
ids) BranchCount
n OutExpr
e

    go StaticEnv
_   BranchCount
_ (Lit Literal
l)
       | Literal -> Bool
isLitRubbish Literal
l        = ArgSummary
TrivArg -- Leads to unproductive inlining in WWRec, #20035
       | Bool
otherwise             = ArgSummary
ValueArg
    go StaticEnv
_   BranchCount
_ (Type OutType
_)          = ArgSummary
TrivArg
    go StaticEnv
_   BranchCount
_ (Coercion OutCoercion
_)      = ArgSummary
TrivArg
    go StaticEnv
env BranchCount
n (App OutExpr
fn (Type OutType
_)) = StaticEnv -> BranchCount -> OutExpr -> ArgSummary
go StaticEnv
env BranchCount
n OutExpr
fn
    go StaticEnv
env BranchCount
n (App OutExpr
fn OutExpr
_)        = StaticEnv -> BranchCount -> OutExpr -> ArgSummary
go StaticEnv
env (BranchCount
nBranchCount -> BranchCount -> BranchCount
forall a. Num a => a -> a -> a
+BranchCount
1) OutExpr
fn
    go StaticEnv
env BranchCount
n (Tick CoreTickish
_ OutExpr
a)        = StaticEnv -> BranchCount -> OutExpr -> ArgSummary
go StaticEnv
env BranchCount
n OutExpr
a
    go StaticEnv
env BranchCount
n (Cast OutExpr
e OutCoercion
_)        = StaticEnv -> BranchCount -> OutExpr -> ArgSummary
go StaticEnv
env BranchCount
n OutExpr
e
    go StaticEnv
env BranchCount
n (Lam Id
v OutExpr
e)
       | Id -> Bool
isTyVar Id
v             = StaticEnv -> BranchCount -> OutExpr -> ArgSummary
go StaticEnv
env BranchCount
n OutExpr
e
       | BranchCount
nBranchCount -> BranchCount -> Bool
forall a. Ord a => a -> a -> Bool
>BranchCount
0                   = ArgSummary
NonTrivArg     -- (\x.b) e   is NonTriv
       | Bool
otherwise             = ArgSummary
ValueArg
    go StaticEnv
_ BranchCount
_ (Case {})           = ArgSummary
NonTrivArg
    go StaticEnv
env BranchCount
n (Let Bind Id
b OutExpr
e)         = case StaticEnv -> BranchCount -> OutExpr -> ArgSummary
go StaticEnv
env' BranchCount
n OutExpr
e of
                                   ArgSummary
ValueArg -> ArgSummary
ValueArg
                                   ArgSummary
_        -> ArgSummary
NonTrivArg
                               where
                                 env' :: StaticEnv
env' = StaticEnv
env StaticEnv -> [Id] -> StaticEnv
`addNewInScopeIds` Bind Id -> [Id]
forall b. Bind b -> [b]
bindersOf Bind Id
b

    go_var :: BranchCount -> Id -> ArgSummary
go_var BranchCount
n Id
v
       | Id -> Bool
isConLikeId Id
v     = ArgSummary
ValueArg   -- Experimenting with 'conlike' rather that
                                        --    data constructors here
       | Id -> BranchCount
idArity Id
v BranchCount -> BranchCount -> Bool
forall a. Ord a => a -> a -> Bool
> BranchCount
n     = ArgSummary
ValueArg   -- Catches (eg) primops with arity but no unfolding
       | BranchCount
n BranchCount -> BranchCount -> Bool
forall a. Ord a => a -> a -> Bool
> BranchCount
0             = ArgSummary
NonTrivArg -- Saturated or unknown call
       | Bool
conlike_unfolding = ArgSummary
ValueArg   -- n==0; look for an interesting unfolding
                                        -- See Note [Conlike is interesting]
       | Bool
otherwise         = ArgSummary
TrivArg    -- n==0, no useful unfolding
       where
         conlike_unfolding :: Bool
conlike_unfolding = Unfolding -> Bool
isConLikeUnfolding (IdUnfoldingFun
idUnfolding Id
v)

{-
************************************************************************
*                                                                      *
                  SimplMode
*                                                                      *
************************************************************************
-}

updModeForStableUnfoldings :: Activation -> SimplMode -> SimplMode
-- See Note [The environments of the Simplify pass]
updModeForStableUnfoldings :: Activation -> SimplMode -> SimplMode
updModeForStableUnfoldings Activation
unf_act SimplMode
current_mode
  = SimplMode
current_mode { sm_phase      = phaseFromActivation unf_act
                 , sm_eta_expand = False
                 , sm_inline     = True }
       -- sm_eta_expand: see Note [Eta expansion in stable unfoldings and rules]
       -- sm_rules: just inherit; sm_rules might be "off"
       --           because of -fno-enable-rewrite-rules
  where
    phaseFromActivation :: Activation -> CompilerPhase
phaseFromActivation (ActiveAfter SourceText
_ BranchCount
n) = BranchCount -> CompilerPhase
Phase BranchCount
n
    phaseFromActivation Activation
_                 = CompilerPhase
InitialPhase

updModeForRules :: SimplMode -> SimplMode
-- See Note [Simplifying rules]
-- See Note [The environments of the Simplify pass]
updModeForRules :: SimplMode -> SimplMode
updModeForRules SimplMode
current_mode
  = SimplMode
current_mode { sm_phase        = InitialPhase
                 , sm_inline       = False
                      -- See Note [Do not expose strictness if sm_inline=False]
                 , sm_rules        = False
                 , sm_cast_swizzle = False
                      -- See Note [Cast swizzling on rule LHSs]
                 , sm_eta_expand   = False }

{- Note [Simplifying rules]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When simplifying a rule LHS, refrain from /any/ inlining or applying
of other RULES. Doing anything to the LHS is plain confusing, because
it means that what the rule matches is not what the user
wrote. c.f. #10595, and #10528.

* sm_inline, sm_rules: inlining (or applying rules) on rule LHSs risks
  introducing Ticks into the LHS, which makes matching
  trickier. #10665, #10745.

  Doing this to either side confounds tools like HERMIT, which seek to reason
  about and apply the RULES as originally written. See #10829.

  See also Note [Do not expose strictness if sm_inline=False]

* sm_eta_expand: the template (LHS) of a rule must only mention coercion
  /variables/ not arbitrary coercions.  See Note [Casts in the template] in
  GHC.Core.Rules.  Eta expansion can create new coercions; so we switch
  it off.

There is, however, one case where we are pretty much /forced/ to transform the
LHS of a rule: postInlineUnconditionally. For instance, in the case of

    let f = g @Int in f

We very much want to inline f into the body of the let. However, to do so (and
be able to safely drop f's binding) we must inline into all occurrences of f,
including those in the LHS of rules.

This can cause somewhat surprising results; for instance, in #18162 we found
that a rule template contained ticks in its arguments, because
postInlineUnconditionally substituted in a trivial expression that contains
ticks. See Note [Tick annotations in RULE matching] in GHC.Core.Rules for
details.

Note [Cast swizzling on rule LHSs]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In the LHS of a RULE we may have
       (\x. blah |> CoVar cv)
where `cv` is a coercion variable.  Critically, we really only want
coercion /variables/, not general coercions, on the LHS of a RULE.  So
we don't want to swizzle this to
      (\x. blah) |> (Refl xty `FunCo` CoVar cv)
So we switch off cast swizzling in updModeForRules.

Note [Eta expansion in stable unfoldings and rules]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SPJ Jul 22: whether or not eta-expansion is switched on in a stable
unfolding, or the RHS of a RULE, seems to be a bit moot. But switching
it on adds clutter, so I'm experimenting with switching off
eta-expansion in such places.

In the olden days, we really /wanted/ to switch it off.

    Old note: If we have a stable unfolding
      f :: Ord a => a -> IO ()
      -- Unfolding template
      --    = /\a \(d:Ord a) (x:a). bla
    we do not want to eta-expand to
      f :: Ord a => a -> IO ()
      -- Unfolding template
      --    = (/\a \(d:Ord a) (x:a) (eta:State#). bla eta) |> co
    because now specialisation of the overloading doesn't work properly
    (see Note [Specialisation shape] in GHC.Core.Opt.Specialise), #9509.
    So we disable eta-expansion in stable unfoldings.

But this old note is no longer relevant because the specialiser has
improved: see Note [Account for casts in binding] in
GHC.Core.Opt.Specialise.  So we seem to have a free choice.

Note [Inlining in gentle mode]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Something is inlined if
   (i)   the sm_inline flag is on, AND
   (ii)  the thing has an INLINE pragma, AND
   (iii) the thing is inlinable in the earliest phase.

Example of why (iii) is important:
  {-# INLINE [~1] g #-}
  g = ...

  {-# INLINE f #-}
  f x = g (g x)

If we were to inline g into f's inlining, then an importing module would
never be able to do
        f e --> g (g e) ---> RULE fires
because the stable unfolding for f has had g inlined into it.

On the other hand, it is bad not to do ANY inlining into an
stable unfolding, because then recursive knots in instance declarations
don't get unravelled.

However, *sometimes* SimplGently must do no call-site inlining at all
(hence sm_inline = False).  Before full laziness we must be careful
not to inline wrappers, because doing so inhibits floating
    e.g. ...(case f x of ...)...
    ==> ...(case (case x of I# x# -> fw x#) of ...)...
    ==> ...(case x of I# x# -> case fw x# of ...)...
and now the redex (f x) isn't floatable any more.

The no-inlining thing is also important for Template Haskell.  You might be
compiling in one-shot mode with -O2; but when TH compiles a splice before
running it, we don't want to use -O2.  Indeed, we don't want to inline
anything, because the byte-code interpreter might get confused about
unboxed tuples and suchlike.

Note [Simplifying inside stable unfoldings]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We must take care with simplification inside stable unfoldings (which come from
INLINE pragmas).

First, consider the following example
        let f = \pq -> BIG
        in
        let g = \y -> f y y
            {-# INLINE g #-}
        in ...g...g...g...g...g...
Now, if that's the ONLY occurrence of f, it might be inlined inside g,
and thence copied multiple times when g is inlined. HENCE we treat
any occurrence in a stable unfolding as a multiple occurrence, not a single
one; see OccurAnal.addRuleUsage.

Second, we do want *do* to some modest rules/inlining stuff in stable
unfoldings, partly to eliminate senseless crap, and partly to break
the recursive knots generated by instance declarations.

However, suppose we have
        {-# INLINE <act> f #-}
        f = <rhs>
meaning "inline f in phases p where activation <act>(p) holds".
Then what inlinings/rules can we apply to the copy of <rhs> captured in
f's stable unfolding?  Our model is that literally <rhs> is substituted for
f when it is inlined.  So our conservative plan (implemented by
updModeForStableUnfoldings) is this:

  -------------------------------------------------------------
  When simplifying the RHS of a stable unfolding, set the phase
  to the phase in which the stable unfolding first becomes active
  -------------------------------------------------------------

That ensures that

  a) Rules/inlinings that *cease* being active before p will
     not apply to the stable unfolding, consistent with it being
     inlined in its *original* form in phase p.

  b) Rules/inlinings that only become active *after* p will
     not apply to the stable unfolding, again to be consistent with
     inlining the *original* rhs in phase p.

For example,
        {-# INLINE f #-}
        f x = ...g...

        {-# NOINLINE [1] g #-}
        g y = ...

        {-# RULE h g = ... #-}
Here we must not inline g into f's RHS, even when we get to phase 0,
because when f is later inlined into some other module we want the
rule for h to fire.

Similarly, consider
        {-# INLINE f #-}
        f x = ...g...

        g y = ...
and suppose that there are auto-generated specialisations and a strictness
wrapper for g.  The specialisations get activation AlwaysActive, and the
strictness wrapper get activation (ActiveAfter 0).  So the strictness
wrepper fails the test and won't be inlined into f's stable unfolding. That
means f can inline, expose the specialised call to g, so the specialisation
rules can fire.

A note about wrappers
~~~~~~~~~~~~~~~~~~~~~
It's also important not to inline a worker back into a wrapper.
A wrapper looks like
        wraper = inline_me (\x -> ...worker... )
Normally, the inline_me prevents the worker getting inlined into
the wrapper (initially, the worker's only call site!).  But,
if the wrapper is sure to be called, the strictness analyser will
mark it 'demanded', so when the RHS is simplified, it'll get an ArgOf
continuation.
-}

activeUnfolding :: SimplMode -> Id -> Bool
activeUnfolding :: SimplMode -> Id -> Bool
activeUnfolding SimplMode
mode Id
id
  | Unfolding -> Bool
isCompulsoryUnfolding (IdUnfoldingFun
realIdUnfolding Id
id)
  = Bool
True   -- Even sm_inline can't override compulsory unfoldings
  | Bool
otherwise
  = CompilerPhase -> Activation -> Bool
isActive (SimplMode -> CompilerPhase
sm_phase SimplMode
mode) (Id -> Activation
idInlineActivation Id
id)
  Bool -> Bool -> Bool
&& SimplMode -> Bool
sm_inline SimplMode
mode
      -- `or` isStableUnfolding (realIdUnfolding id)
      -- Inline things when
      --  (a) they are active
      --  (b) sm_inline says so, except that for stable unfoldings
      --                         (ie pragmas) we inline anyway

getUnfoldingInRuleMatch :: SimplEnv -> InScopeEnv
-- When matching in RULE, we want to "look through" an unfolding
-- (to see a constructor) if *rules* are on, even if *inlinings*
-- are not.  A notable example is DFuns, which really we want to
-- match in rules like (op dfun) in gentle mode. Another example
-- is 'otherwise' which we want exprIsConApp_maybe to be able to
-- see very early on
getUnfoldingInRuleMatch :: StaticEnv -> InScopeEnv
getUnfoldingInRuleMatch StaticEnv
env
  = InScopeSet -> IdUnfoldingFun -> InScopeEnv
ISE InScopeSet
in_scope IdUnfoldingFun
id_unf
  where
    in_scope :: InScopeSet
in_scope = StaticEnv -> InScopeSet
seInScope StaticEnv
env
    phase :: CompilerPhase
phase    = StaticEnv -> CompilerPhase
sePhase StaticEnv
env
    id_unf :: IdUnfoldingFun
id_unf   = (Activation -> Bool) -> IdUnfoldingFun
whenActiveUnfoldingFun (CompilerPhase -> Activation -> Bool
isActive CompilerPhase
phase)
     -- When sm_rules was off we used to test for a /stable/ unfolding,
     -- but that seems wrong (#20941)

----------------------
activeRule :: SimplMode -> Activation -> Bool
-- Nothing => No rules at all
activeRule :: SimplMode -> Activation -> Bool
activeRule SimplMode
mode
  | Bool -> Bool
not (SimplMode -> Bool
sm_rules SimplMode
mode) = \Activation
_ -> Bool
False     -- Rewriting is off
  | Bool
otherwise           = CompilerPhase -> Activation -> Bool
isActive (SimplMode -> CompilerPhase
sm_phase SimplMode
mode)

{-
************************************************************************
*                                                                      *
                  preInlineUnconditionally
*                                                                      *
************************************************************************

preInlineUnconditionally
~~~~~~~~~~~~~~~~~~~~~~~~
@preInlineUnconditionally@ examines a bndr to see if it is used just
once in a completely safe way, so that it is safe to discard the
binding inline its RHS at the (unique) usage site, REGARDLESS of how
big the RHS might be.  If this is the case we don't simplify the RHS
first, but just inline it un-simplified.

This is much better than first simplifying a perhaps-huge RHS and then
inlining and re-simplifying it.  Indeed, it can be at least quadratically
better.  Consider

        x1 = e1
        x2 = e2[x1]
        x3 = e3[x2]
        ...etc...
        xN = eN[xN-1]

We may end up simplifying e1 N times, e2 N-1 times, e3 N-3 times etc.
This can happen with cascades of functions too:

        f1 = \x1.e1
        f2 = \xs.e2[f1]
        f3 = \xs.e3[f3]
        ...etc...

THE MAIN INVARIANT is this:

        ----  preInlineUnconditionally invariant -----
   IF preInlineUnconditionally chooses to inline x = <rhs>
   THEN doing the inlining should not change the occurrence
        info for the free vars of <rhs>
        ----------------------------------------------

For example, it's tempting to look at trivial binding like
        x = y
and inline it unconditionally.  But suppose x is used many times,
but this is the unique occurrence of y.  Then inlining x would change
y's occurrence info, which breaks the invariant.  It matters: y
might have a BIG rhs, which will now be dup'd at every occurrence of x.


Even RHSs labelled InlineMe aren't caught here, because there might be
no benefit from inlining at the call site.

[Sept 01] Don't unconditionally inline a top-level thing, because that
can simply make a static thing into something built dynamically.  E.g.
        x = (a,b)
        main = \s -> h x

[Remember that we treat \s as a one-shot lambda.]  No point in
inlining x unless there is something interesting about the call site.

But watch out: if you aren't careful, some useful foldr/build fusion
can be lost (most notably in spectral/hartel/parstof) because the
foldr didn't see the build.  Doing the dynamic allocation isn't a big
deal, in fact, but losing the fusion can be.  But the right thing here
seems to be to do a callSiteInline based on the fact that there is
something interesting about the call site (it's strict).  Hmm.  That
seems a bit fragile.

Conclusion: inline top level things gaily until FinalPhase (the last
phase), at which point don't.

Note [pre/postInlineUnconditionally in gentle mode]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Even in gentle mode we want to do preInlineUnconditionally.  The
reason is that too little clean-up happens if you don't inline
use-once things.  Also a bit of inlining is *good* for full laziness;
it can expose constant sub-expressions.  Example in
spectral/mandel/Mandel.hs, where the mandelset function gets a useful
let-float if you inline windowToViewport

However, as usual for Gentle mode, do not inline things that are
inactive in the initial stages.  See Note [Gentle mode].

Note [Stable unfoldings and preInlineUnconditionally]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Surprisingly, do not pre-inline-unconditionally Ids with INLINE pragmas!
Example

   {-# INLINE f #-}
   f :: Eq a => a -> a
   f x = ...

   fInt :: Int -> Int
   fInt = f Int dEqInt

   ...fInt...fInt...fInt...

Here f occurs just once, in the RHS of fInt. But if we inline it there
it might make fInt look big, and we'll lose the opportunity to inline f
at each of fInt's call sites.  The INLINE pragma will only inline when
the application is saturated for exactly this reason; and we don't
want PreInlineUnconditionally to second-guess it. A live example is #3736.
    c.f. Note [Stable unfoldings and postInlineUnconditionally]

NB: this only applies for INLINE things. Do /not/ switch off
preInlineUnconditionally for

* INLINABLE. It just says to GHC "inline this if you like".  If there
  is a unique occurrence, we want to inline the stable unfolding, not
  the RHS.

* NONLINE[n] just switches off inlining until phase n.  We should
  respect that, but after phase n, just behave as usual.

* NoUserInlinePrag.  There is no pragma at all. This ends up on wrappers.
  (See #18815.)

Note [Top-level bottoming Ids]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Don't inline top-level Ids that are bottoming, even if they are used just
once, because FloatOut has gone to some trouble to extract them out.
Inlining them won't make the program run faster!

Note [Do not inline CoVars unconditionally]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Coercion variables appear inside coercions, and the RHS of a let-binding
is a term (not a coercion) so we can't necessarily inline the latter in
the former.
-}

preInlineUnconditionally
    :: SimplEnv -> TopLevelFlag -> InId
    -> InExpr -> StaticEnv  -- These two go together
    -> Maybe SimplEnv       -- Returned env has extended substitution
-- Precondition: rhs satisfies the let-can-float invariant
-- See Note [Core let-can-float invariant] in GHC.Core
-- Reason: we don't want to inline single uses, or discard dead bindings,
--         for unlifted, side-effect-ful bindings
preInlineUnconditionally :: StaticEnv
-> TopLevelFlag -> Id -> OutExpr -> StaticEnv -> Maybe StaticEnv
preInlineUnconditionally StaticEnv
env TopLevelFlag
top_lvl Id
bndr OutExpr
rhs StaticEnv
rhs_env
  | Bool -> Bool
not Bool
pre_inline_unconditionally           = Maybe StaticEnv
forall a. Maybe a
Nothing
  | Bool -> Bool
not Bool
active                               = Maybe StaticEnv
forall a. Maybe a
Nothing
  | TopLevelFlag -> Bool
isTopLevel TopLevelFlag
top_lvl Bool -> Bool -> Bool
&& Id -> Bool
isDeadEndId Id
bndr   = Maybe StaticEnv
forall a. Maybe a
Nothing -- Note [Top-level bottoming Ids]
  | Id -> Bool
isCoVar Id
bndr                             = Maybe StaticEnv
forall a. Maybe a
Nothing -- Note [Do not inline CoVars unconditionally]
  | Id -> Bool
isExitJoinId Id
bndr                        = Maybe StaticEnv
forall a. Maybe a
Nothing -- Note [Do not inline exit join points]
                                                       -- in module Exitify
  | Bool -> Bool
not (OccInfo -> Bool
one_occ (Id -> OccInfo
idOccInfo Id
bndr))           = Maybe StaticEnv
forall a. Maybe a
Nothing
  | Bool -> Bool
not (Unfolding -> Bool
isStableUnfolding Unfolding
unf)              = StaticEnv -> Maybe StaticEnv
forall a. a -> Maybe a
Just (StaticEnv -> Maybe StaticEnv) -> StaticEnv -> Maybe StaticEnv
forall a b. (a -> b) -> a -> b
$! (OutExpr -> StaticEnv
extend_subst_with OutExpr
rhs)

  -- See Note [Stable unfoldings and preInlineUnconditionally]
  | Bool -> Bool
not (InlinePragma -> Bool
isInlinePragma InlinePragma
inline_prag)
  , Just OutExpr
inl <- Unfolding -> Maybe OutExpr
maybeUnfoldingTemplate Unfolding
unf   = StaticEnv -> Maybe StaticEnv
forall a. a -> Maybe a
Just (StaticEnv -> Maybe StaticEnv) -> StaticEnv -> Maybe StaticEnv
forall a b. (a -> b) -> a -> b
$! (OutExpr -> StaticEnv
extend_subst_with OutExpr
inl)
  | Bool
otherwise                                = Maybe StaticEnv
forall a. Maybe a
Nothing
  where
    unf :: Unfolding
unf = IdUnfoldingFun
idUnfolding Id
bndr
    extend_subst_with :: OutExpr -> StaticEnv
extend_subst_with OutExpr
inl_rhs = StaticEnv -> Id -> SimplSR -> StaticEnv
extendIdSubst StaticEnv
env Id
bndr (SimplSR -> StaticEnv) -> SimplSR -> StaticEnv
forall a b. (a -> b) -> a -> b
$! (StaticEnv -> OutExpr -> SimplSR
mkContEx StaticEnv
rhs_env OutExpr
inl_rhs)

    one_occ :: OccInfo -> Bool
one_occ OccInfo
IAmDead = Bool
True -- Happens in ((\x.1) v)
    one_occ OneOcc{ occ_n_br :: OccInfo -> BranchCount
occ_n_br   = BranchCount
1
                  , occ_in_lam :: OccInfo -> InsideLam
occ_in_lam = InsideLam
NotInsideLam }   = TopLevelFlag -> Bool
isNotTopLevel TopLevelFlag
top_lvl Bool -> Bool -> Bool
|| Bool
early_phase
    one_occ OneOcc{ occ_n_br :: OccInfo -> BranchCount
occ_n_br   = BranchCount
1
                  , occ_in_lam :: OccInfo -> InsideLam
occ_in_lam = InsideLam
IsInsideLam
                  , occ_int_cxt :: OccInfo -> InterestingCxt
occ_int_cxt = InterestingCxt
IsInteresting } = OutExpr -> Bool
canInlineInLam OutExpr
rhs
    one_occ OccInfo
_                                     = Bool
False

    pre_inline_unconditionally :: Bool
pre_inline_unconditionally = StaticEnv -> Bool
sePreInline StaticEnv
env
    active :: Bool
active = CompilerPhase -> Activation -> Bool
isActive (StaticEnv -> CompilerPhase
sePhase StaticEnv
env) (InlinePragma -> Activation
inlinePragmaActivation InlinePragma
inline_prag)
             -- See Note [pre/postInlineUnconditionally in gentle mode]
    inline_prag :: InlinePragma
inline_prag = Id -> InlinePragma
idInlinePragma Id
bndr

-- Be very careful before inlining inside a lambda, because (a) we must not
-- invalidate occurrence information, and (b) we want to avoid pushing a
-- single allocation (here) into multiple allocations (inside lambda).
-- Inlining a *function* with a single *saturated* call would be ok, mind you.
--      || (if is_cheap && not (canInlineInLam rhs) then pprTrace "preinline" (ppr bndr <+> ppr rhs) ok else ok)
--      where
--              is_cheap = exprIsCheap rhs
--              ok = is_cheap && int_cxt

        --      int_cxt         The context isn't totally boring
        -- E.g. let f = \ab.BIG in \y. map f xs
        --      Don't want to substitute for f, because then we allocate
        --      its closure every time the \y is called
        -- But: let f = \ab.BIG in \y. map (f y) xs
        --      Now we do want to substitute for f, even though it's not
        --      saturated, because we're going to allocate a closure for
        --      (f y) every time round the loop anyhow.

        -- canInlineInLam => free vars of rhs are (Once in_lam) or Many,
        -- so substituting rhs inside a lambda doesn't change the occ info.
        -- Sadly, not quite the same as exprIsHNF.
    canInlineInLam :: OutExpr -> Bool
canInlineInLam (Lit Literal
_)    = Bool
True
    canInlineInLam (Lam Id
b OutExpr
e)  = Id -> Bool
isRuntimeVar Id
b Bool -> Bool -> Bool
|| OutExpr -> Bool
canInlineInLam OutExpr
e
    canInlineInLam (Tick CoreTickish
t OutExpr
e) = Bool -> Bool
not (CoreTickish -> Bool
forall (pass :: TickishPass). GenTickish pass -> Bool
tickishIsCode CoreTickish
t) Bool -> Bool -> Bool
&& OutExpr -> Bool
canInlineInLam OutExpr
e
    canInlineInLam OutExpr
_          = Bool
False
      -- not ticks.  Counting ticks cannot be duplicated, and non-counting
      -- ticks around a Lam will disappear anyway.

    early_phase :: Bool
early_phase = StaticEnv -> CompilerPhase
sePhase StaticEnv
env CompilerPhase -> CompilerPhase -> Bool
forall a. Eq a => a -> a -> Bool
/= CompilerPhase
FinalPhase
    -- If we don't have this early_phase test, consider
    --      x = length [1,2,3]
    -- The full laziness pass carefully floats all the cons cells to
    -- top level, and preInlineUnconditionally floats them all back in.
    -- Result is (a) static allocation replaced by dynamic allocation
    --           (b) many simplifier iterations because this tickles
    --               a related problem; only one inlining per pass
    --
    -- On the other hand, I have seen cases where top-level fusion is
    -- lost if we don't inline top level thing (e.g. string constants)
    -- Hence the test for phase zero (which is the phase for all the final
    -- simplifications).  Until phase zero we take no special notice of
    -- top level things, but then we become more leery about inlining
    -- them.

{-
************************************************************************
*                                                                      *
                  postInlineUnconditionally
*                                                                      *
************************************************************************

postInlineUnconditionally
~~~~~~~~~~~~~~~~~~~~~~~~~
@postInlineUnconditionally@ decides whether to unconditionally inline
a thing based on the form of its RHS; in particular if it has a
trivial RHS.  If so, we can inline and discard the binding altogether.

NB: a loop breaker has must_keep_binding = True and non-loop-breakers
only have *forward* references. Hence, it's safe to discard the binding

NOTE: This isn't our last opportunity to inline.  We're at the binding
site right now, and we'll get another opportunity when we get to the
occurrence(s)

Note that we do this unconditional inlining only for trivial RHSs.
Don't inline even WHNFs inside lambdas; doing so may simply increase
allocation when the function is called. This isn't the last chance; see
NOTE above.

NB: Even inline pragmas (e.g. IMustBeINLINEd) are ignored here Why?
Because we don't even want to inline them into the RHS of constructor
arguments. See NOTE above

NB: At one time even NOINLINE was ignored here: if the rhs is trivial
it's best to inline it anyway.  We often get a=E; b=a from desugaring,
with both a and b marked NOINLINE.  But that seems incompatible with
our new view that inlining is like a RULE, so I'm sticking to the 'active'
story for now.

NB: unconditional inlining of this sort can introduce ticks in places that
may seem surprising; for instance, the LHS of rules. See Note [Simplifying
rules] for details.
-}

postInlineUnconditionally
    :: SimplEnv -> BindContext
    -> OutId            -- The binder (*not* a CoVar), including its unfolding
    -> OccInfo          -- From the InId
    -> OutExpr
    -> Bool
-- Precondition: rhs satisfies the let-can-float invariant
-- See Note [Core let-can-float invariant] in GHC.Core
-- Reason: we don't want to inline single uses, or discard dead bindings,
--         for unlifted, side-effect-ful bindings
postInlineUnconditionally :: StaticEnv -> BindContext -> Id -> OccInfo -> OutExpr -> Bool
postInlineUnconditionally StaticEnv
env BindContext
bind_cxt Id
bndr OccInfo
occ_info OutExpr
rhs
  | Bool -> Bool
not Bool
active                  = Bool
False
  | OccInfo -> Bool
isWeakLoopBreaker OccInfo
occ_info  = Bool
False -- If it's a loop-breaker of any kind, don't inline
                                        -- because it might be referred to "earlier"
  | Unfolding -> Bool
isStableUnfolding Unfolding
unfolding = Bool
False -- Note [Stable unfoldings and postInlineUnconditionally]
  | TopLevelFlag -> Bool
isTopLevel (BindContext -> TopLevelFlag
bindContextLevel BindContext
bind_cxt)
                                = Bool
False -- Note [Top level and postInlineUnconditionally]
  | OutExpr -> Bool
exprIsTrivial OutExpr
rhs           = Bool
True
  | BC_Join {} <- BindContext
bind_cxt              -- See point (1) of Note [Duplicating join points]
  , Bool -> Bool
not (CompilerPhase
phase CompilerPhase -> CompilerPhase -> Bool
forall a. Eq a => a -> a -> Bool
== CompilerPhase
FinalPhase)   = Bool
False -- in Simplify.hs
  | Bool
otherwise
  = case OccInfo
occ_info of
      OneOcc { occ_in_lam :: OccInfo -> InsideLam
occ_in_lam = InsideLam
in_lam, occ_int_cxt :: OccInfo -> InterestingCxt
occ_int_cxt = InterestingCxt
int_cxt, occ_n_br :: OccInfo -> BranchCount
occ_n_br = BranchCount
n_br }
        -- See Note [Inline small things to avoid creating a thunk]

        -> BranchCount
n_br BranchCount -> BranchCount -> Bool
forall a. Ord a => a -> a -> Bool
< BranchCount
100  -- See Note [Suppress exponential blowup]

           Bool -> Bool -> Bool
&& UnfoldingOpts -> Unfolding -> Bool
smallEnoughToInline UnfoldingOpts
uf_opts Unfolding
unfolding     -- Small enough to dup
                        -- ToDo: consider discount on smallEnoughToInline if int_cxt is true
                        --
                        -- NB: Do NOT inline arbitrarily big things, even if occ_n_br=1
                        -- Reason: doing so risks exponential behaviour.  We simplify a big
                        --         expression, inline it, and simplify it again.  But if the
                        --         very same thing happens in the big expression, we get
                        --         exponential cost!
                        -- PRINCIPLE: when we've already simplified an expression once,
                        -- make sure that we only inline it if it's reasonably small.

           Bool -> Bool -> Bool
&& (InsideLam
in_lam InsideLam -> InsideLam -> Bool
forall a. Eq a => a -> a -> Bool
== InsideLam
NotInsideLam Bool -> Bool -> Bool
||
                        -- Outside a lambda, we want to be reasonably aggressive
                        -- about inlining into multiple branches of case
                        -- e.g. let x = <non-value>
                        --      in case y of { C1 -> ..x..; C2 -> ..x..; C3 -> ... }
                        -- Inlining can be a big win if C3 is the hot-spot, even if
                        -- the uses in C1, C2 are not 'interesting'
                        -- An example that gets worse if you add int_cxt here is 'clausify'

                (Unfolding -> Bool
isCheapUnfolding Unfolding
unfolding Bool -> Bool -> Bool
&& InterestingCxt
int_cxt InterestingCxt -> InterestingCxt -> Bool
forall a. Eq a => a -> a -> Bool
== InterestingCxt
IsInteresting))
                        -- isCheap => acceptable work duplication; in_lam may be true
                        -- int_cxt to prevent us inlining inside a lambda without some
                        -- good reason.  See the notes on int_cxt in preInlineUnconditionally

      OccInfo
IAmDead -> Bool
True   -- This happens; for example, the case_bndr during case of
                        -- known constructor:  case (a,b) of x { (p,q) -> ... }
                        -- Here x isn't mentioned in the RHS, so we don't want to
                        -- create the (dead) let-binding  let x = (a,b) in ...

      OccInfo
_ -> Bool
False

-- Here's an example that we don't handle well:
--      let f = if b then Left (\x.BIG) else Right (\y.BIG)
--      in \y. ....case f of {...} ....
-- Here f is used just once, and duplicating the case work is fine (exprIsCheap).
-- But
--  - We can't preInlineUnconditionally because that would invalidate
--    the occ info for b.
--  - We can't postInlineUnconditionally because the RHS is big, and
--    that risks exponential behaviour
--  - We can't call-site inline, because the rhs is big
-- Alas!

  where
    unfolding :: Unfolding
unfolding = IdUnfoldingFun
idUnfolding Id
bndr
    uf_opts :: UnfoldingOpts
uf_opts   = StaticEnv -> UnfoldingOpts
seUnfoldingOpts StaticEnv
env
    phase :: CompilerPhase
phase     = StaticEnv -> CompilerPhase
sePhase StaticEnv
env
    active :: Bool
active    = CompilerPhase -> Activation -> Bool
isActive CompilerPhase
phase (Id -> Activation
idInlineActivation Id
bndr)
        -- See Note [pre/postInlineUnconditionally in gentle mode]

{- Note [Inline small things to avoid creating a thunk]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The point of examining occ_info here is that for *non-values* that
occur outside a lambda, the call-site inliner won't have a chance
(because it doesn't know that the thing only occurs once).  The
pre-inliner won't have gotten it either, if the thing occurs in more
than one branch So the main target is things like

     let x = f y in
     case v of
        True  -> case x of ...
        False -> case x of ...

This is very important in practice; e.g. wheel-seive1 doubles
in allocation if you miss this out.  And bits of GHC itself start
to allocate more.  An egregious example is test perf/compiler/T14697,
where GHC.Driver.CmdLine.$wprocessArgs allocated hugely more.

Note [Suppress exponential blowup]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In #13253, and several related tickets, we got an exponential blowup
in code size from postInlineUnconditionally.  The trouble comes when
we have
  let j1a = case f y     of { True -> p;   False -> q }
      j1b = case f y     of { True -> q;   False -> p }
      j2a = case f (y+1) of { True -> j1a; False -> j1b }
      j2b = case f (y+1) of { True -> j1b; False -> j1a }
      ...
  in case f (y+10) of { True -> j10a; False -> j10b }

when there are many branches. In pass 1, postInlineUnconditionally
inlines j10a and j10b (they are both small).  Now we have two calls
to j9a and two to j9b.  In pass 2, postInlineUnconditionally inlines
all four of these calls, leaving four calls to j8a and j8b. Etc.
Yikes!  This is exponential!

A possible plan: stop doing postInlineUnconditionally
for some fixed, smallish number of branches, say 4. But that turned
out to be bad: see Note [Inline small things to avoid creating a thunk].
And, as it happened, the problem with #13253 was solved in a
different way (Note [Duplicating StrictArg] in Simplify).

So I just set an arbitrary, high limit of 100, to stop any
totally exponential behaviour.

This still leaves the nasty possibility that /ordinary/ inlining (not
postInlineUnconditionally) might inline these join points, each of
which is individually quiet small.  I'm still not sure what to do
about this (e.g. see #15488).

Note [Top level and postInlineUnconditionally]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We don't do postInlineUnconditionally for top-level things (even for
ones that are trivial):

  * Doing so will inline top-level error expressions that have been
    carefully floated out by FloatOut.  More generally, it might
    replace static allocation with dynamic.

  * Even for trivial expressions there's a problem.  Consider
      {-# RULE "foo" forall (xs::[T]). reverse xs = ruggle xs #-}
      blah xs = reverse xs
      ruggle = sort
    In one simplifier pass we might fire the rule, getting
      blah xs = ruggle xs
    but in *that* simplifier pass we must not do postInlineUnconditionally
    on 'ruggle' because then we'll have an unbound occurrence of 'ruggle'

    If the rhs is trivial it'll be inlined by callSiteInline, and then
    the binding will be dead and discarded by the next use of OccurAnal

  * There is less point, because the main goal is to get rid of local
    bindings used in multiple case branches.

  * The inliner should inline trivial things at call sites anyway.

  * The Id might be exported.  We could check for that separately,
    but since we aren't going to postInlineUnconditionally /any/
    top-level bindings, we don't need to test.

Note [Stable unfoldings and postInlineUnconditionally]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Do not do postInlineUnconditionally if the Id has a stable unfolding,
otherwise we lose the unfolding.  Example

     -- f has stable unfolding with rhs (e |> co)
     --   where 'e' is big
     f = e |> co

Then there's a danger we'll optimise to

     f' = e
     f = f' |> co

and now postInlineUnconditionally, losing the stable unfolding on f.  Now f'
won't inline because 'e' is too big.

    c.f. Note [Stable unfoldings and preInlineUnconditionally]


************************************************************************
*                                                                      *
        Rebuilding a lambda
*                                                                      *
************************************************************************
-}

rebuildLam :: SimplEnv
           -> [OutBndr] -> OutExpr
           -> SimplCont
           -> SimplM OutExpr
-- (rebuildLam env bndrs body cont)
-- returns expr which means the same as \bndrs. body
--
-- But it tries
--      a) eta reduction, if that gives a trivial expression
--      b) eta expansion [only if there are some value lambdas]
--
-- NB: the SimplEnv already includes the [OutBndr] in its in-scope set

rebuildLam :: StaticEnv -> [Id] -> OutExpr -> SimplCont -> SimplM OutExpr
rebuildLam StaticEnv
_env [] OutExpr
body SimplCont
_cont
  = OutExpr -> SimplM OutExpr
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return OutExpr
body

rebuildLam StaticEnv
env bndrs :: [Id]
bndrs@(Id
bndr:[Id]
_) OutExpr
body SimplCont
cont
  = {-# SCC "rebuildLam" #-} [Id] -> OutExpr -> SimplM OutExpr
try_eta [Id]
bndrs OutExpr
body
  where
    rec_ids :: UnVarSet
rec_ids  = StaticEnv -> UnVarSet
seRecIds StaticEnv
env
    in_scope :: InScopeSet
in_scope = StaticEnv -> InScopeSet
getInScope StaticEnv
env  -- Includes 'bndrs'
    mb_rhs :: Maybe RecFlag
mb_rhs   = SimplCont -> Maybe RecFlag
contIsRhs SimplCont
cont

    -- See Note [Eta reduction based on evaluation context]
    eval_sd :: SubDemand
eval_sd = SimplCont -> SubDemand
contEvalContext SimplCont
cont
        -- NB: cont is never ApplyToVal, because beta-reduction would
        -- have happened.  So contEvalContext can panic on ApplyToVal.

    try_eta :: [OutBndr] -> OutExpr -> SimplM OutExpr
    try_eta :: [Id] -> OutExpr -> SimplM OutExpr
try_eta [Id]
bndrs OutExpr
body
      | -- Try eta reduction
        StaticEnv -> Bool
seDoEtaReduction StaticEnv
env
      , Just OutExpr
etad_lam <- UnVarSet -> [Id] -> OutExpr -> SubDemand -> Maybe OutExpr
tryEtaReduce UnVarSet
rec_ids [Id]
bndrs OutExpr
body SubDemand
eval_sd
      = do { Tick -> SimplM ()
tick (Id -> Tick
EtaReduction Id
bndr)
           ; OutExpr -> SimplM OutExpr
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return OutExpr
etad_lam }

      | -- Try eta expansion
        Maybe RecFlag
Nothing <- Maybe RecFlag
mb_rhs  -- See Note [Eta expanding lambdas]
      , StaticEnv -> Bool
seEtaExpand StaticEnv
env
      , (Id -> Bool) -> [Id] -> Bool
forall (t :: * -> *) a. Foldable t => (a -> Bool) -> t a -> Bool
any Id -> Bool
isRuntimeVar [Id]
bndrs  -- Only when there is at least one value lambda already
      , Just SafeArityType
body_arity <- (() :: Constraint) => ArityOpts -> OutExpr -> Maybe SafeArityType
ArityOpts -> OutExpr -> Maybe SafeArityType
exprEtaExpandArity (StaticEnv -> ArityOpts
seArityOpts StaticEnv
env) OutExpr
body
      = do { Tick -> SimplM ()
tick (Id -> Tick
EtaExpansion Id
bndr)
           ; let body' :: OutExpr
body' = InScopeSet -> SafeArityType -> OutExpr -> OutExpr
etaExpandAT InScopeSet
in_scope SafeArityType
body_arity OutExpr
body
           ; String -> SDoc -> SimplM ()
traceSmpl String
"eta expand" ([SDoc] -> SDoc
forall doc. IsDoc doc => [doc] -> doc
vcat [String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"before" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> OutExpr -> SDoc
forall a. Outputable a => a -> SDoc
ppr OutExpr
body
                                          , String -> SDoc
forall doc. IsLine doc => String -> doc
text String
"after" SDoc -> SDoc -> SDoc
forall doc. IsLine doc => doc -> doc -> doc
<+> OutExpr -> SDoc
forall a. Outputable a => a -> SDoc
ppr OutExpr
body'])
           -- NB: body' might have an outer Cast, but if so
           --     mk_lams will pull it further out, past 'bndrs' to the top
           ; OutExpr -> SimplM OutExpr
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return ([Id] -> OutExpr -> OutExpr
mk_lams [Id]
bndrs OutExpr
body') }

      | Bool
otherwise
      = OutExpr -> SimplM OutExpr
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return ([Id] -> OutExpr -> OutExpr
mk_lams [Id]
bndrs OutExpr
body)

    mk_lams :: [OutBndr] -> OutExpr -> OutExpr
    -- mk_lams pulls casts and ticks to the top
    mk_lams :: [Id] -> OutExpr -> OutExpr
mk_lams [Id]
bndrs body :: OutExpr
body@(Lam {})
      = [Id] -> OutExpr -> OutExpr
mk_lams ([Id]
bndrs [Id] -> [Id] -> [Id]
forall a. [a] -> [a] -> [a]
++ [Id]
bndrs1) OutExpr
body1
      where
        ([Id]
bndrs1, OutExpr
body1) = OutExpr -> ([Id], OutExpr)
forall b. Expr b -> ([b], Expr b)
collectBinders OutExpr
body

    mk_lams [Id]
bndrs (Tick CoreTickish
t OutExpr
expr)
      | CoreTickish -> Bool
forall (pass :: TickishPass). GenTickish pass -> Bool
tickishFloatable CoreTickish
t
      = CoreTickish -> OutExpr -> OutExpr
mkTick CoreTickish
t ([Id] -> OutExpr -> OutExpr
mk_lams [Id]
bndrs OutExpr
expr)

    mk_lams [Id]
bndrs (Cast OutExpr
body OutCoercion
co)
      | -- Note [Casts and lambdas]
        StaticEnv -> Bool
seCastSwizzle StaticEnv
env
      , Bool -> Bool
not ((Id -> Bool) -> [Id] -> Bool
forall (t :: * -> *) a. Foldable t => (a -> Bool) -> t a -> Bool
any Id -> Bool
bad [Id]
bndrs)
      = (() :: Constraint) => OutExpr -> OutCoercion -> OutExpr
OutExpr -> OutCoercion -> OutExpr
mkCast ([Id] -> OutExpr -> OutExpr
mk_lams [Id]
bndrs OutExpr
body) (Role -> [Id] -> OutCoercion -> OutCoercion
mkPiCos Role
Representational [Id]
bndrs OutCoercion
co)
      where
        co_vars :: TyCoVarSet
co_vars  = OutCoercion -> TyCoVarSet
tyCoVarsOfCo OutCoercion
co
        bad :: Id -> Bool
bad Id
bndr = Id -> Bool
isCoVar Id
bndr Bool -> Bool -> Bool
&& Id
bndr Id -> TyCoVarSet -> Bool
`elemVarSet` TyCoVarSet
co_vars

    mk_lams [Id]
bndrs OutExpr
body
      = [Id] -> OutExpr -> OutExpr
forall b. [b] -> Expr b -> Expr b
mkLams [Id]
bndrs OutExpr
body

{-
Note [Eta expanding lambdas]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In general we *do* want to eta-expand lambdas. Consider
   f (\x -> case x of (a,b) -> \s -> blah)
where 's' is a state token, and hence can be eta expanded.  This
showed up in the code for GHc.IO.Handle.Text.hPutChar, a rather
important function!

The eta-expansion will never happen unless we do it now.  (Well, it's
possible that CorePrep will do it, but CorePrep only has a half-baked
eta-expander that can't deal with casts.  So it's much better to do it
here.)

However, when the lambda is let-bound, as the RHS of a let, we have a
better eta-expander (in the form of tryEtaExpandRhs), so we don't
bother to try expansion in mkLam in that case; hence the contIsRhs
guard.

Note [Casts and lambdas]
~~~~~~~~~~~~~~~~~~~~~~~~
Consider
        (\(x:tx). (\(y:ty). e) `cast` co)

We float the cast out, thus
        (\(x:tx) (y:ty). e) `cast` (tx -> co)

We do this for at least three reasons:

1. There is a danger here that the two lambdas look separated, and the
   full laziness pass might float an expression to between the two.

2. The occurrence analyser will mark x as InsideLam if the Lam nodes
   are separated (see the Lam case of occAnal).  By floating the cast
   out we put the two Lams together, so x can get a vanilla Once
   annotation.  If this lambda is the RHS of a let, which we inline,
   we can do preInlineUnconditionally on that x=arg binding.  With the
   InsideLam OccInfo, we can't do that, which results in an extra
   iteration of the Simplifier.

3. It may cancel with another cast.  E.g
      (\x. e |> co1) |> co2
   If we float out co1 it might cancel with co2.  Similarly
      let f = (\x. e |> co1) in ...
   If we float out co1, and then do cast worker/wrapper, we get
      let f1 = \x.e; f = f1 |> co1 in ...
   and now we can inline f, hoping that co1 may cancel at a call site.

TL;DR: put the lambdas together if at all possible.

In general, here's the transformation:
        \x. e `cast` co   ===>   (\x. e) `cast` (tx -> co)
        /\a. e `cast` co  ===>   (/\a. e) `cast` (/\a. co)
        /\g. e `cast` co  ===>   (/\g. e) `cast` (/\g. co)
                          (if not (g `in` co))

We call this "cast swizzling". It is controlled by sm_cast_swizzle.
See also Note [Cast swizzling on rule LHSs]

Wrinkles

* Notice that it works regardless of 'e'.  Originally it worked only
  if 'e' was itself a lambda, but in some cases that resulted in
  fruitless iteration in the simplifier.  A good example was when
  compiling Text.ParserCombinators.ReadPrec, where we had a definition
  like    (\x. Get `cast` g)
  where Get is a constructor with nonzero arity.  Then mkLam eta-expanded
  the Get, and the next iteration eta-reduced it, and then eta-expanded
  it again.

* Note also the side condition for the case of coercion binders, namely
  not (any bad bndrs).  It does not make sense to transform
          /\g. e `cast` g  ==>  (/\g.e) `cast` (/\g.g)
  because the latter is not well-kinded.


************************************************************************
*                                                                      *
              Eta expansion
*                                                                      *
************************************************************************
-}

tryEtaExpandRhs :: SimplEnv -> BindContext -> OutId -> OutExpr
                -> SimplM (ArityType, OutExpr)
-- See Note [Eta-expanding at let bindings]
tryEtaExpandRhs :: StaticEnv
-> BindContext -> Id -> OutExpr -> SimplM (SafeArityType, OutExpr)
tryEtaExpandRhs StaticEnv
env BindContext
bind_cxt Id
bndr OutExpr
rhs
  | StaticEnv -> Bool
seEtaExpand StaticEnv
env         -- If Eta-expansion is on
  , OutExpr -> Bool
wantEtaExpansion OutExpr
rhs    -- and we'd like to eta-expand e
  , Bool
do_eta_expand           -- and e's manifest arity is lower than
                            --     what it could be
                            --     (never true for join points)
  =                         -- Do eta-expansion.
    Bool
-> SDoc
-> SimplM (SafeArityType, OutExpr)
-> SimplM (SafeArityType, OutExpr)
forall a. HasCallStack => Bool -> SDoc -> a -> a
assertPpr( Bool -> Bool
not (BindContext -> Bool
isJoinBC BindContext
bind_cxt) ) (Id -> SDoc
forall a. Outputable a => a -> SDoc
ppr Id
bndr) (SimplM (SafeArityType, OutExpr)
 -> SimplM (SafeArityType, OutExpr))
-> SimplM (SafeArityType, OutExpr)
-> SimplM (SafeArityType, OutExpr)
forall a b. (a -> b) -> a -> b
$
       -- assert: this never happens for join points; see GHC.Core.Opt.Arity
       --         Note [Do not eta-expand join points]
    do { Tick -> SimplM ()
tick (Id -> Tick
EtaExpansion Id
bndr)
       ; (SafeArityType, OutExpr) -> SimplM (SafeArityType, OutExpr)
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return (SafeArityType
arity_type, InScopeSet -> SafeArityType -> OutExpr -> OutExpr
etaExpandAT InScopeSet
in_scope SafeArityType
arity_type OutExpr
rhs) }

  | Bool
otherwise
  = (SafeArityType, OutExpr) -> SimplM (SafeArityType, OutExpr)
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return (SafeArityType
arity_type, OutExpr
rhs)

  where
    in_scope :: InScopeSet
in_scope   = StaticEnv -> InScopeSet
getInScope StaticEnv
env
    arity_opts :: ArityOpts
arity_opts = StaticEnv -> ArityOpts
seArityOpts StaticEnv
env
    is_rec :: RecFlag
is_rec     = BindContext -> RecFlag
bindContextRec BindContext
bind_cxt
    (Bool
do_eta_expand, SafeArityType
arity_type) = ArityOpts -> RecFlag -> Id -> OutExpr -> (Bool, SafeArityType)
findRhsArity ArityOpts
arity_opts RecFlag
is_rec Id
bndr OutExpr
rhs

wantEtaExpansion :: CoreExpr -> Bool
-- Mostly True; but False of PAPs which will immediately eta-reduce again
-- See Note [Which RHSs do we eta-expand?]
wantEtaExpansion :: OutExpr -> Bool
wantEtaExpansion (Cast OutExpr
e OutCoercion
_)             = OutExpr -> Bool
wantEtaExpansion OutExpr
e
wantEtaExpansion (Tick CoreTickish
_ OutExpr
e)             = OutExpr -> Bool
wantEtaExpansion OutExpr
e
wantEtaExpansion (Lam Id
b OutExpr
e) | Id -> Bool
isTyVar Id
b  = OutExpr -> Bool
wantEtaExpansion OutExpr
e
wantEtaExpansion (App OutExpr
e OutExpr
_)              = OutExpr -> Bool
wantEtaExpansion OutExpr
e
wantEtaExpansion (Var {})               = Bool
False
wantEtaExpansion (Lit {})               = Bool
False
wantEtaExpansion OutExpr
_                      = Bool
True

{-
Note [Eta-expanding at let bindings]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We now eta expand at let-bindings, which is where the payoff comes.
The most significant thing is that we can do a simple arity analysis
(in GHC.Core.Opt.Arity.findRhsArity), which we can't do for free-floating lambdas

One useful consequence of not eta-expanding lambdas is this example:
   genMap :: C a => ...
   {-# INLINE genMap #-}
   genMap f xs = ...

   myMap :: D a => ...
   {-# INLINE myMap #-}
   myMap = genMap

Notice that 'genMap' should only inline if applied to two arguments.
In the stable unfolding for myMap we'll have the unfolding
    (\d -> genMap Int (..d..))
We do not want to eta-expand to
    (\d f xs -> genMap Int (..d..) f xs)
because then 'genMap' will inline, and it really shouldn't: at least
as far as the programmer is concerned, it's not applied to two
arguments!

Note [Which RHSs do we eta-expand?]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We don't eta-expand:

* Trivial RHSs, e.g.     f = g
  If we eta expand do
    f = \x. g x
  we'll just eta-reduce again, and so on; so the
  simplifier never terminates.

* PAPs: see Note [Do not eta-expand PAPs]

What about things like this?
   f = case y of p -> \x -> blah

Here we do eta-expand.  This is a change (Jun 20), but if we have
really decided that f has arity 1, then putting that lambda at the top
seems like a Good idea.

Note [Do not eta-expand PAPs]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We used to have old_arity = manifestArity rhs, which meant that we
would eta-expand even PAPs.  But this gives no particular advantage,
and can lead to a massive blow-up in code size, exhibited by #9020.
Suppose we have a PAP
    foo :: IO ()
    foo = returnIO ()
Then we can eta-expand to
    foo = (\eta. (returnIO () |> sym g) eta) |> g
where
    g :: IO () ~ State# RealWorld -> (# State# RealWorld, () #)

But there is really no point in doing this, and it generates masses of
coercions and whatnot that eventually disappear again. For T9020, GHC
allocated 6.6G before, and 0.8G afterwards; and residency dropped from
1.8G to 45M.

Moreover, if we eta expand
        f = g d  ==>  f = \x. g d x
that might in turn make g inline (if it has an inline pragma), which
we might not want.  After all, INLINE pragmas say "inline only when
saturated" so we don't want to be too gung-ho about saturating!

But note that this won't eta-expand, say
  f = \g -> map g
Does it matter not eta-expanding such functions?  I'm not sure.  Perhaps
strictness analysis will have less to bite on?


************************************************************************
*                                                                      *
\subsection{Floating lets out of big lambdas}
*                                                                      *
************************************************************************

Note [Floating and type abstraction]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Consider this:
        x = /\a. C e1 e2
We'd like to float this to
        y1 = /\a. e1
        y2 = /\a. e2
        x  = /\a. C (y1 a) (y2 a)
for the usual reasons: we want to inline x rather vigorously.

You may think that this kind of thing is rare.  But in some programs it is
common.  For example, if you do closure conversion you might get:

        data a :-> b = forall e. (e -> a -> b) :$ e

        f_cc :: forall a. a :-> a
        f_cc = /\a. (\e. id a) :$ ()

Now we really want to inline that f_cc thing so that the
construction of the closure goes away.

So I have elaborated simplLazyBind to understand right-hand sides that look
like
        /\ a1..an. body

and treat them specially. The real work is done in
GHC.Core.Opt.Simplify.Utils.abstractFloats, but there is quite a bit of plumbing
in simplLazyBind as well.

The same transformation is good when there are lets in the body:

        /\abc -> let(rec) x = e in b
   ==>
        let(rec) x' = /\abc -> let x = x' a b c in e
        in
        /\abc -> let x = x' a b c in b

This is good because it can turn things like:

        let f = /\a -> letrec g = ... g ... in g
into
        letrec g' = /\a -> ... g' a ...
        in
        let f = /\ a -> g' a

which is better.  In effect, it means that big lambdas don't impede
let-floating.

This optimisation is CRUCIAL in eliminating the junk introduced by
desugaring mutually recursive definitions.  Don't eliminate it lightly!

[May 1999]  If we do this transformation *regardless* then we can
end up with some pretty silly stuff.  For example,

        let
            st = /\ s -> let { x1=r1 ; x2=r2 } in ...
        in ..
becomes
        let y1 = /\s -> r1
            y2 = /\s -> r2
            st = /\s -> ...[y1 s/x1, y2 s/x2]
        in ..

Unless the "..." is a WHNF there is really no point in doing this.
Indeed it can make things worse.  Suppose x1 is used strictly,
and is of the form

        x1* = case f y of { (a,b) -> e }

If we abstract this wrt the tyvar we then can't do the case inline
as we would normally do.

That's why the whole transformation is part of the same process that
floats let-bindings and constructor arguments out of RHSs.  In particular,
it is guarded by the doFloatFromRhs call in simplLazyBind.

Note [Which type variables to abstract over]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Abstract only over the type variables free in the rhs wrt which the
new binding is abstracted.  Several points worth noting

(AB1) The naive approach of abstracting wrt the
      tyvars free in the Id's /type/ fails. Consider:
          /\ a b -> let t :: (a,b) = (e1, e2)
                        x :: a     = fst t
                    in ...
      Here, b isn't free in x's type, but we must nevertheless
      abstract wrt b as well, because t's type mentions b.
      Since t is floated too, we'd end up with the bogus:
           poly_t = /\ a b -> (e1, e2)
           poly_x = /\ a   -> fst (poly_t a *b*)

(AB2) We must do closeOverKinds.  Example (#10934):
       f = /\k (f:k->*) (a:k). let t = AccFailure @ (f a) in ...
      Here we want to float 't', but we must remember to abstract over
      'k' as well, even though it is not explicitly mentioned in the RHS,
      otherwise we get
         t = /\ (f:k->*) (a:k). AccFailure @ (f a)
      which is obviously bogus.

(AB3) We get the variables to abstract over by filtering down the
      the main_tvs for the original function, picking only ones
      mentioned in the abstracted body. This means:
      - they are automatically in dependency order, because main_tvs is
      - there is no issue about non-determinism
      - we don't gratuitously change order, which may help (in a tiny
        way) with CSE and/or the compiler-debugging experience

(AB4) For a recursive group, it's a bit of a pain to work out the minimal
      set of tyvars over which to abstract:
           /\ a b c.  let x = ...a... in
                      letrec { p = ...x...q...
                               q = .....p...b... } in
                      ...
      Since 'x' is abstracted over 'a', the {p,q} group must be abstracted
      over 'a' (because x is replaced by (poly_x a)) as well as 'b'.
      Remember this bizarre case too:
           x::a = x
      Here, we must abstract 'x' over 'a'.

      Why is it worth doing this?  Partly tidiness; and partly #22459
      which showed that it's harder to do polymorphic specialisation well
      if there are dictionaries abstracted over unnecessary type variables.
      See Note [Weird special case for SpecDict] in GHC.Core.Opt.Specialise
-}

abstractFloats :: UnfoldingOpts -> TopLevelFlag -> [OutTyVar] -> SimplFloats
              -> OutExpr -> SimplM ([OutBind], OutExpr)
abstractFloats :: UnfoldingOpts
-> TopLevelFlag
-> [Id]
-> SimplFloats
-> OutExpr
-> SimplM ([Bind Id], OutExpr)
abstractFloats UnfoldingOpts
uf_opts TopLevelFlag
top_lvl [Id]
main_tvs SimplFloats
floats OutExpr
body
  = Bool -> SimplM ([Bind Id], OutExpr) -> SimplM ([Bind Id], OutExpr)
forall a. HasCallStack => Bool -> a -> a
assert ([Bind Id] -> Bool
forall (f :: * -> *) a. Foldable f => f a -> Bool
notNull [Bind Id]
body_floats) (SimplM ([Bind Id], OutExpr) -> SimplM ([Bind Id], OutExpr))
-> SimplM ([Bind Id], OutExpr) -> SimplM ([Bind Id], OutExpr)
forall a b. (a -> b) -> a -> b
$
    Bool -> SimplM ([Bind Id], OutExpr) -> SimplM ([Bind Id], OutExpr)
forall a. HasCallStack => Bool -> a -> a
assert (OrdList (Bind Id) -> Bool
forall a. OrdList a -> Bool
isNilOL (SimplFloats -> OrdList (Bind Id)
sfJoinFloats SimplFloats
floats)) (SimplM ([Bind Id], OutExpr) -> SimplM ([Bind Id], OutExpr))
-> SimplM ([Bind Id], OutExpr) -> SimplM ([Bind Id], OutExpr)
forall a b. (a -> b) -> a -> b
$
    do  { (Subst
subst, [Bind Id]
float_binds) <- (Subst -> Bind Id -> SimplM (Subst, Bind Id))
-> Subst -> [Bind Id] -> SimplM (Subst, [Bind Id])
forall (m :: * -> *) (t :: * -> *) acc x y.
(Monad m, Traversable t) =>
(acc -> x -> m (acc, y)) -> acc -> t x -> m (acc, t y)
mapAccumLM Subst -> Bind Id -> SimplM (Subst, Bind Id)
abstract Subst
empty_subst [Bind Id]
body_floats
        ; ([Bind Id], OutExpr) -> SimplM ([Bind Id], OutExpr)
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return ([Bind Id]
float_binds, (() :: Constraint) => Subst -> OutExpr -> OutExpr
Subst -> OutExpr -> OutExpr
GHC.Core.Subst.substExpr Subst
subst OutExpr
body) }
  where
    is_top_lvl :: Bool
is_top_lvl  = TopLevelFlag -> Bool
isTopLevel TopLevelFlag
top_lvl
    body_floats :: [Bind Id]
body_floats = LetFloats -> [Bind Id]
letFloatBinds (SimplFloats -> LetFloats
sfLetFloats SimplFloats
floats)
    empty_subst :: Subst
empty_subst = InScopeSet -> Subst
GHC.Core.Subst.mkEmptySubst (SimplFloats -> InScopeSet
sfInScope SimplFloats
floats)

    abstract :: GHC.Core.Subst.Subst -> OutBind -> SimplM (GHC.Core.Subst.Subst, OutBind)
    abstract :: Subst -> Bind Id -> SimplM (Subst, Bind Id)
abstract Subst
subst (NonRec Id
id OutExpr
rhs)
      = do { (Id
poly_id1, OutExpr
poly_app) <- [Id] -> Id -> SimplM (Id, OutExpr)
mk_poly1 [Id]
tvs_here Id
id
           ; let (Id
poly_id2, OutExpr
poly_rhs) = Id -> [Id] -> OutExpr -> (Id, OutExpr)
mk_poly2 Id
poly_id1 [Id]
tvs_here OutExpr
rhs'
                 !subst' :: Subst
subst' = Subst -> Id -> OutExpr -> Subst
GHC.Core.Subst.extendIdSubst Subst
subst Id
id OutExpr
poly_app
           ; (Subst, Bind Id) -> SimplM (Subst, Bind Id)
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return (Subst
subst', Id -> OutExpr -> Bind Id
forall b. b -> Expr b -> Bind b
NonRec Id
poly_id2 OutExpr
poly_rhs) }
      where
        rhs' :: OutExpr
rhs' = (() :: Constraint) => Subst -> OutExpr -> OutExpr
Subst -> OutExpr -> OutExpr
GHC.Core.Subst.substExpr Subst
subst OutExpr
rhs

        -- tvs_here: see Note [Which type variables to abstract over]
        tvs_here :: [Id]
tvs_here = TyCoVarSet -> [Id]
choose_tvs ((Id -> Bool) -> OutExpr -> TyCoVarSet
exprSomeFreeVars Id -> Bool
isTyVar OutExpr
rhs')

    abstract Subst
subst (Rec [(Id, OutExpr)]
prs)
      = do { ([Id]
poly_ids, [OutExpr]
poly_apps) <- (Id -> SimplM (Id, OutExpr)) -> [Id] -> SimplM ([Id], [OutExpr])
forall (m :: * -> *) a b c.
Applicative m =>
(a -> m (b, c)) -> [a] -> m ([b], [c])
mapAndUnzipM ([Id] -> Id -> SimplM (Id, OutExpr)
mk_poly1 [Id]
tvs_here) [Id]
ids
           ; let subst' :: Subst
subst' = Subst -> [(Id, OutExpr)] -> Subst
GHC.Core.Subst.extendSubstList Subst
subst ([Id]
ids [Id] -> [OutExpr] -> [(Id, OutExpr)]
forall a b. [a] -> [b] -> [(a, b)]
`zip` [OutExpr]
poly_apps)
                 poly_pairs :: [(Id, OutExpr)]
poly_pairs = [ Id -> [Id] -> OutExpr -> (Id, OutExpr)
mk_poly2 Id
poly_id [Id]
tvs_here OutExpr
rhs'
                              | (Id
poly_id, OutExpr
rhs) <- [Id]
poly_ids [Id] -> [OutExpr] -> [(Id, OutExpr)]
forall a b. [a] -> [b] -> [(a, b)]
`zip` [OutExpr]
rhss
                              , let rhs' :: OutExpr
rhs' = (() :: Constraint) => Subst -> OutExpr -> OutExpr
Subst -> OutExpr -> OutExpr
GHC.Core.Subst.substExpr Subst
subst' OutExpr
rhs ]
           ; (Subst, Bind Id) -> SimplM (Subst, Bind Id)
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return (Subst
subst', [(Id, OutExpr)] -> Bind Id
forall b. [(b, Expr b)] -> Bind b
Rec [(Id, OutExpr)]
poly_pairs) }
      where
        ([Id]
ids,[OutExpr]
rhss) = [(Id, OutExpr)] -> ([Id], [OutExpr])
forall a b. [(a, b)] -> ([a], [b])
unzip [(Id, OutExpr)]
prs


        -- tvs_here: see Note [Which type variables to abstract over]
        tvs_here :: [Id]
tvs_here = TyCoVarSet -> [Id]
choose_tvs (((Id, OutExpr) -> TyCoVarSet) -> [(Id, OutExpr)] -> TyCoVarSet
forall a. (a -> TyCoVarSet) -> [a] -> TyCoVarSet
mapUnionVarSet (Id, OutExpr) -> TyCoVarSet
get_bind_fvs [(Id, OutExpr)]
prs)

        -- See wrinkle (AB4) in Note [Which type variables to abstract over]
        get_bind_fvs :: (Id, OutExpr) -> TyCoVarSet
get_bind_fvs (Id
id,OutExpr
rhs) = OutType -> TyCoVarSet
tyCoVarsOfType (Id -> OutType
idType Id
id) TyCoVarSet -> TyCoVarSet -> TyCoVarSet
`unionVarSet` OutExpr -> TyCoVarSet
get_rec_rhs_tvs OutExpr
rhs
        get_rec_rhs_tvs :: OutExpr -> TyCoVarSet
get_rec_rhs_tvs OutExpr
rhs   = (Id -> TyCoVarSet -> TyCoVarSet)
-> TyCoVarSet -> TyCoVarSet -> TyCoVarSet
forall a. (Id -> a -> a) -> a -> TyCoVarSet -> a
nonDetStrictFoldVarSet Id -> TyCoVarSet -> TyCoVarSet
get_tvs TyCoVarSet
emptyVarSet (OutExpr -> TyCoVarSet
exprFreeVars OutExpr
rhs)

        get_tvs :: Var -> VarSet -> VarSet
        get_tvs :: Id -> TyCoVarSet -> TyCoVarSet
get_tvs Id
var TyCoVarSet
free_tvs
           | Id -> Bool
isTyVar Id
var      -- CoVars have been substituted away
           = TyCoVarSet -> Id -> TyCoVarSet
extendVarSet TyCoVarSet
free_tvs Id
var
           | Id -> Bool
isCoVar Id
var  -- CoVars can be free in the RHS, but they are never let-bound;
           = TyCoVarSet
free_tvs     -- Do not call lookupIdSubst_maybe, though (#23426)
                          --    because it has a non-CoVar precondition
           | Just OutExpr
poly_app <- (() :: Constraint) => Subst -> Id -> Maybe OutExpr
Subst -> Id -> Maybe OutExpr
GHC.Core.Subst.lookupIdSubst_maybe Subst
subst Id
var
           = -- 'var' is like 'x' in (AB4)
             (Id -> Bool) -> OutExpr -> TyCoVarSet
exprSomeFreeVars Id -> Bool
isTyVar OutExpr
poly_app TyCoVarSet -> TyCoVarSet -> TyCoVarSet
`unionVarSet` TyCoVarSet
free_tvs
           | Bool
otherwise
           = TyCoVarSet
free_tvs

    choose_tvs :: TyCoVarSet -> [Id]
choose_tvs TyCoVarSet
free_tvs
       = (Id -> Bool) -> [Id] -> [Id]
forall a. (a -> Bool) -> [a] -> [a]
filter (Id -> TyCoVarSet -> Bool
`elemVarSet` TyCoVarSet
all_free_tvs) [Id]
main_tvs  -- (AB3)
       where
         all_free_tvs :: TyCoVarSet
all_free_tvs = TyCoVarSet -> TyCoVarSet
closeOverKinds TyCoVarSet
free_tvs       -- (AB2)

    mk_poly1 :: [TyVar] -> Id -> SimplM (Id, CoreExpr)
    mk_poly1 :: [Id] -> Id -> SimplM (Id, OutExpr)
mk_poly1 [Id]
tvs_here Id
var
      = do { Unique
uniq <- SimplM Unique
forall (m :: * -> *). MonadUnique m => m Unique
getUniqueM
           ; let  poly_name :: Name
poly_name = Name -> Unique -> Name
setNameUnique (Id -> Name
idName Id
var) Unique
uniq      -- Keep same name
                  poly_ty :: OutType
poly_ty   = [Id] -> OutType -> OutType
mkInfForAllTys [Id]
tvs_here (Id -> OutType
idType Id
var) -- But new type of course
                  poly_id :: Id
poly_id   = Id -> [Id] -> Id -> Id
transferPolyIdInfo Id
var [Id]
tvs_here (Id -> Id) -> Id -> Id
forall a b. (a -> b) -> a -> b
$ -- Note [transferPolyIdInfo] in GHC.Types.Id
                              (() :: Constraint) => Name -> OutType -> OutType -> Id
Name -> OutType -> OutType -> Id
mkLocalId Name
poly_name (Id -> OutType
idMult Id
var) OutType
poly_ty
           ; (Id, OutExpr) -> SimplM (Id, OutExpr)
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return (Id
poly_id, OutExpr -> [OutType] -> OutExpr
forall b. Expr b -> [OutType] -> Expr b
mkTyApps (Id -> OutExpr
forall b. Id -> Expr b
Var Id
poly_id) ([Id] -> [OutType]
mkTyVarTys [Id]
tvs_here)) }
                -- In the olden days, it was crucial to copy the occInfo of the original var,
                -- because we were looking at occurrence-analysed but as yet unsimplified code!
                -- In particular, we mustn't lose the loop breakers.  BUT NOW we are looking
                -- at already simplified code, so it doesn't matter
                --
                -- It's even right to retain single-occurrence or dead-var info:
                -- Suppose we started with  /\a -> let x = E in B
                -- where x occurs once in B. Then we transform to:
                --      let x' = /\a -> E in /\a -> let x* = x' a in B
                -- where x* has an INLINE prag on it.  Now, once x* is inlined,
                -- the occurrences of x' will be just the occurrences originally
                -- pinned on x.

    mk_poly2 :: Id -> [TyVar] -> CoreExpr -> (Id, CoreExpr)
    mk_poly2 :: Id -> [Id] -> OutExpr -> (Id, OutExpr)
mk_poly2 Id
poly_id [Id]
tvs_here OutExpr
rhs
      = (Id
poly_id Id -> Unfolding -> Id
`setIdUnfolding` Unfolding
unf, OutExpr
poly_rhs)
      where
        poly_rhs :: OutExpr
poly_rhs = [Id] -> OutExpr -> OutExpr
forall b. [b] -> Expr b -> Expr b
mkLams [Id]
tvs_here OutExpr
rhs
        unf :: Unfolding
unf = UnfoldingOpts
-> UnfoldingSource
-> Bool
-> Bool
-> OutExpr
-> Maybe UnfoldingCache
-> Unfolding
mkUnfolding UnfoldingOpts
uf_opts UnfoldingSource
VanillaSrc Bool
is_top_lvl Bool
False OutExpr
poly_rhs Maybe UnfoldingCache
forall a. Maybe a
Nothing

        -- We want the unfolding.  Consider
        --      let
        --            x = /\a. let y = ... in Just y
        --      in body
        -- Then we float the y-binding out (via abstractFloats and addPolyBind)
        -- but 'x' may well then be inlined in 'body' in which case we'd like the
        -- opportunity to inline 'y' too.

{-
Note [Abstract over coercions]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If a coercion variable (g :: a ~ Int) is free in the RHS, then so is the
type variable a.  Rather than sort this mess out, we simply bale out and abstract
wrt all the type variables if any of them are coercion variables.


Historical note: if you use let-bindings instead of a substitution, beware of this:

                -- Suppose we start with:
                --
                --      x = /\ a -> let g = G in E
                --
                -- Then we'll float to get
                --
                --      x = let poly_g = /\ a -> G
                --          in /\ a -> let g = poly_g a in E
                --
                -- But now the occurrence analyser will see just one occurrence
                -- of poly_g, not inside a lambda, so the simplifier will
                -- PreInlineUnconditionally poly_g back into g!  Badk to square 1!
                -- (I used to think that the "don't inline lone occurrences" stuff
                --  would stop this happening, but since it's the *only* occurrence,
                --  PreInlineUnconditionally kicks in first!)
                --
                -- Solution: put an INLINE note on g's RHS, so that poly_g seems
                --           to appear many times.  (NB: mkInlineMe eliminates
                --           such notes on trivial RHSs, so do it manually.)

************************************************************************
*                                                                      *
                prepareAlts
*                                                                      *
************************************************************************

prepareAlts tries these things:

1.  filterAlts: eliminate alternatives that cannot match, including
    the DEFAULT alternative.  Here "cannot match" includes knowledge
    from GADTs

2.  refineDefaultAlt: if the DEFAULT alternative can match only one
    possible constructor, then make that constructor explicit.
    e.g.
        case e of x { DEFAULT -> rhs }
     ===>
        case e of x { (a,b) -> rhs }
    where the type is a single constructor type.  This gives better code
    when rhs also scrutinises x or e.
    See GHC.Core.Utils Note [Refine DEFAULT case alternatives]

3. combineIdenticalAlts: combine identical alternatives into a DEFAULT.
   See CoreUtils Note [Combine identical alternatives], which also
   says why we do this on InAlts not on OutAlts

4. Returns a list of the constructors that cannot holds in the
   DEFAULT alternative (if there is one)

It's a good idea to do this stuff before simplifying the alternatives, to
avoid simplifying alternatives we know can't happen, and to come up with
the list of constructors that are handled, to put into the IdInfo of the
case binder, for use when simplifying the alternatives.

Eliminating the default alternative in (1) isn't so obvious, but it can
happen:

data Colour = Red | Green | Blue

f x = case x of
        Red -> ..
        Green -> ..
        DEFAULT -> h x

h y = case y of
        Blue -> ..
        DEFAULT -> [ case y of ... ]

If we inline h into f, the default case of the inlined h can't happen.
If we don't notice this, we may end up filtering out *all* the cases
of the inner case y, which give us nowhere to go!

Note [Shadowing in prepareAlts]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Note that we pass case_bndr::InId to prepareAlts; an /InId/, not an
/OutId/.  This is vital, because `refineDefaultAlt` uses `tys` to build
a new /InAlt/.  If you pass an OutId, we'll end up applying the
substitution twice: disaster (#23012).

However this does mean that filling in the default alt might be
delayed by a simplifier cycle, because an InId has less info than an
OutId.  Test simplCore/should_compile/simpl013 apparently shows this
up, although I'm not sure exactly how..
-}

prepareAlts :: OutExpr -> InId -> [InAlt] -> SimplM ([AltCon], [InAlt])
-- The returned alternatives can be empty, none are possible
--
-- Note that case_bndr is an InId; see Note [Shadowing in prepareAlts]
prepareAlts :: OutExpr -> Id -> [InAlt] -> SimplM ([AltCon], [InAlt])
prepareAlts OutExpr
scrut Id
case_bndr [InAlt]
alts
  | Just (TyCon
tc, [OutType]
tys) <- (() :: Constraint) => OutType -> Maybe (TyCon, [OutType])
OutType -> Maybe (TyCon, [OutType])
splitTyConApp_maybe (Id -> OutType
idType Id
case_bndr)
  = do { [Unique]
us <- SimplM [Unique]
forall (m :: * -> *). MonadUnique m => m [Unique]
getUniquesM
       ; let ([AltCon]
idcs1, [InAlt]
alts1) = TyCon -> [OutType] -> [AltCon] -> [InAlt] -> ([AltCon], [InAlt])
forall b.
TyCon -> [OutType] -> [AltCon] -> [Alt b] -> ([AltCon], [Alt b])
filterAlts TyCon
tc [OutType]
tys [AltCon]
imposs_cons [InAlt]
alts
             (Bool
yes2,  [InAlt]
alts2) = [Unique]
-> OutType
-> TyCon
-> [OutType]
-> [AltCon]
-> [InAlt]
-> (Bool, [InAlt])
refineDefaultAlt [Unique]
us (Id -> OutType
idMult Id
case_bndr) TyCon
tc [OutType]
tys [AltCon]
idcs1 [InAlt]
alts1
               -- The multiplicity on case_bndr's is the multiplicity of the
               -- case expression The newly introduced patterns in
               -- refineDefaultAlt must be scaled by this multiplicity
             (Bool
yes3, [AltCon]
idcs3, [InAlt]
alts3) = [AltCon] -> [InAlt] -> (Bool, [AltCon], [InAlt])
combineIdenticalAlts [AltCon]
idcs1 [InAlt]
alts2
             -- "idcs" stands for "impossible default data constructors"
             -- i.e. the constructors that can't match the default case
       ; Bool -> SimplM () -> SimplM ()
forall (f :: * -> *). Applicative f => Bool -> f () -> f ()
when Bool
yes2 (SimplM () -> SimplM ()) -> SimplM () -> SimplM ()
forall a b. (a -> b) -> a -> b
$ Tick -> SimplM ()
tick (Id -> Tick
FillInCaseDefault Id
case_bndr)
       ; Bool -> SimplM () -> SimplM ()
forall (f :: * -> *). Applicative f => Bool -> f () -> f ()
when Bool
yes3 (SimplM () -> SimplM ()) -> SimplM () -> SimplM ()
forall a b. (a -> b) -> a -> b
$ Tick -> SimplM ()
tick (Id -> Tick
AltMerge Id
case_bndr)
       ; ([AltCon], [InAlt]) -> SimplM ([AltCon], [InAlt])
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return ([AltCon]
idcs3, [InAlt]
alts3) }

  | Bool
otherwise  -- Not a data type, so nothing interesting happens
  = ([AltCon], [InAlt]) -> SimplM ([AltCon], [InAlt])
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return ([], [InAlt]
alts)
  where
    imposs_cons :: [AltCon]
imposs_cons = case OutExpr
scrut of
                    Var Id
v -> Unfolding -> [AltCon]
otherCons (IdUnfoldingFun
idUnfolding Id
v)
                    OutExpr
_     -> []


{-
************************************************************************
*                                                                      *
                mkCase
*                                                                      *
************************************************************************

mkCase tries these things

* Note [Merge Nested Cases]
* Note [Eliminate Identity Case]
* Note [Scrutinee Constant Folding]

Note [Merge Nested Cases]
~~~~~~~~~~~~~~~~~~~~~~~~~
       case e of b {             ==>   case e of b {
         p1 -> rhs1                      p1 -> rhs1
         ...                             ...
         pm -> rhsm                      pm -> rhsm
         _  -> case b of b' {            pn -> let b'=b in rhsn
                     pn -> rhsn          ...
                     ...                 po -> let b'=b in rhso
                     po -> rhso          _  -> let b'=b in rhsd
                     _  -> rhsd
       }

which merges two cases in one case when -- the default alternative of
the outer case scrutinises the same variable as the outer case. This
transformation is called Case Merging.  It avoids that the same
variable is scrutinised multiple times.

Note [Eliminate Identity Case]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        case e of               ===> e
                True  -> True;
                False -> False

and similar friends.

Note [Scrutinee Constant Folding]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     case x op# k# of _ {  ===> case x of _ {
        a1# -> e1                  (a1# inv_op# k#) -> e1
        a2# -> e2                  (a2# inv_op# k#) -> e2
        ...                        ...
        DEFAULT -> ed              DEFAULT -> ed

     where (x op# k#) inv_op# k# == x

And similarly for commuted arguments and for some unary operations.

The purpose of this transformation is not only to avoid an arithmetic
operation at runtime but to allow other transformations to apply in cascade.

Example with the "Merge Nested Cases" optimization (from #12877):

      main = case t of t0
         0##     -> ...
         DEFAULT -> case t0 `minusWord#` 1## of t1
            0##     -> ...
            DEFAULT -> case t1 `minusWord#` 1## of t2
               0##     -> ...
               DEFAULT -> case t2 `minusWord#` 1## of _
                  0##     -> ...
                  DEFAULT -> ...

  becomes:

      main = case t of _
      0##     -> ...
      1##     -> ...
      2##     -> ...
      3##     -> ...
      DEFAULT -> ...

There are some wrinkles.

Wrinkle 1:
  Do not apply caseRules if there is just a single DEFAULT alternative,
  unless the case-binder is dead. Example:
     case e +# 3# of b { DEFAULT -> rhs }
  If we applied the transformation here we would (stupidly) get
     case e of b' { DEFAULT -> let b = b' +# 3# in rhs }
  and now the process may repeat, because that let will really
  be a case. But if the original case binder b is dead, we instead get
     case e of b' { DEFAULT -> rhs }
  and there is no such problem.

  See Note [Example of case-merging and caseRules] for a compelling
  example of why this dead-binder business can be really important.


Wrinkle 2:
  The type of the scrutinee might change.  E.g.
        case tagToEnum (x :: Int#) of (b::Bool)
          False -> e1
          True -> e2
  ==>
        case x of (b'::Int#)
          DEFAULT -> e1
          1#      -> e2

Wrinkle 3:
  The case binder may be used in the right hand sides, so we need
  to make a local binding for it, if it is alive.  e.g.
         case e +# 10# of b
           DEFAULT -> blah...b...
           44#     -> blah2...b...
  ===>
         case e of b'
           DEFAULT -> let b = b' +# 10# in blah...b...
           34#     -> let b = 44# in blah2...b...

  Note that in the non-DEFAULT cases we know what to bind 'b' to,
  whereas in the DEFAULT case we must reconstruct the original value.
  But NB: we use b'; we do not duplicate 'e'.

Wrinkle 4:
  In dataToTag we might need to make up some fake binders;
  see Note [caseRules for dataToTag] in GHC.Core.Opt.ConstantFold



Note [Example of case-merging and caseRules]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The case-transformation rules are quite powerful. Here's a
subtle example from #22375.  We start with

  data T = A | B | ...
    deriving Eq

  f :: T -> String
  f x = if | x==A -> "one"
           | x==B -> "two"
           | ...

In Core after a bit of simplification we get:

    f x = case dataToTag# x of a# { _DEFAULT ->
          case a# of
            _DEFAULT -> case dataToTag# x of b# { _DEFAULT ->
                        case b# of
                           _DEFAULT -> ...
                           1# -> "two"
                        }
            0# -> "one"
          }

Now consider what mkCase does to these case expressions.
The case-merge transformation Note [Merge Nested Cases]
does this (affecting both pairs of cases):

    f x = case dataToTag# x of a# {
             _DEFAULT -> case dataToTag# x of b# {
                          _DEFAULT -> ...
                          1# -> "two"
                         }
             0# -> "one"
          }

Now Note [caseRules for dataToTag] does its work, again
on both dataToTag# cases:

    f x = case x of x1 {
             _DEFAULT -> case dataToTag# x1 of a# { _DEFAULT ->
                         case x of x2 {
                           _DEFAULT -> case dataToTag# x2 of b# { _DEFAULT -> ... }
                           B -> "two"
                         }}
             A -> "one"
          }


The new dataToTag# calls come from the "reconstruct scrutinee" part of
caseRules (note that a# and b# were not dead in the original program
before all this merging).  However, since a# and b# /are/ in fact dead
in the resulting program, we are left with redundant dataToTag# calls.
But they are easily eliminated by doing caseRules again, in
the next Simplifier iteration, this time noticing that a# and b# are
dead.  Hence the "dead-binder" sub-case of Wrinkle 1 of Note
[Scrutinee Constant Folding] above.  Once we do this we get

    f x = case x of x1 {
             _DEFAULT -> case x1 of x2 { _DEFAULT ->
                         case x1 of x2 {
                            _DEFAULT -> case x2 of x3 { _DEFAULT -> ... }
                            B -> "two"
                         }}
             A -> "one"
          }

and now we can do case-merge again, getting the desired

    f x = case x of
            A -> "one"
            B -> "two"
            ...

-}

mkCase, mkCase1, mkCase2, mkCase3
   :: SimplMode
   -> OutExpr -> OutId
   -> OutType -> [OutAlt]               -- Alternatives in standard (increasing) order
   -> SimplM OutExpr

--------------------------------------------------
--      1. Merge Nested Cases
--------------------------------------------------

mkCase :: SimplMode -> OutExpr -> Id -> OutType -> [InAlt] -> SimplM OutExpr
mkCase SimplMode
mode OutExpr
scrut Id
outer_bndr OutType
alts_ty (Alt AltCon
DEFAULT [Id]
_ OutExpr
deflt_rhs : [InAlt]
outer_alts)
  | SimplMode -> Bool
sm_case_merge SimplMode
mode
  , ([CoreTickish]
ticks, Case (Var Id
inner_scrut_var) Id
inner_bndr OutType
_ [InAlt]
inner_alts)
       <- (CoreTickish -> Bool) -> OutExpr -> ([CoreTickish], OutExpr)
forall b.
(CoreTickish -> Bool) -> Expr b -> ([CoreTickish], Expr b)
stripTicksTop CoreTickish -> Bool
forall (pass :: TickishPass). GenTickish pass -> Bool
tickishFloatable OutExpr
deflt_rhs
  , Id
inner_scrut_var Id -> Id -> Bool
forall a. Eq a => a -> a -> Bool
== Id
outer_bndr
  = do  { Tick -> SimplM ()
tick (Id -> Tick
CaseMerge Id
outer_bndr)

        ; let wrap_alt :: InAlt -> InAlt
wrap_alt (Alt AltCon
con [Id]
args OutExpr
rhs) = Bool -> InAlt -> InAlt
forall a. HasCallStack => Bool -> a -> a
assert (Id
outer_bndr Id -> [Id] -> Bool
forall (t :: * -> *) a. (Foldable t, Eq a) => a -> t a -> Bool
`notElem` [Id]
args)
                                            (AltCon -> [Id] -> OutExpr -> InAlt
forall b. AltCon -> [b] -> Expr b -> Alt b
Alt AltCon
con [Id]
args (OutExpr -> OutExpr
wrap_rhs OutExpr
rhs))
                -- Simplifier's no-shadowing invariant should ensure
                -- that outer_bndr is not shadowed by the inner patterns
              wrap_rhs :: OutExpr -> OutExpr
wrap_rhs OutExpr
rhs = Bind Id -> OutExpr -> OutExpr
forall b. Bind b -> Expr b -> Expr b
Let (Id -> OutExpr -> Bind Id
forall b. b -> Expr b -> Bind b
NonRec Id
inner_bndr (Id -> OutExpr
forall b. Id -> Expr b
Var Id
outer_bndr)) OutExpr
rhs
                -- The let is OK even for unboxed binders,

              wrapped_alts :: [InAlt]
wrapped_alts | Id -> Bool
isDeadBinder Id
inner_bndr = [InAlt]
inner_alts
                           | Bool
otherwise               = (InAlt -> InAlt) -> [InAlt] -> [InAlt]
forall a b. (a -> b) -> [a] -> [b]
map InAlt -> InAlt
wrap_alt [InAlt]
inner_alts

              merged_alts :: [InAlt]
merged_alts = [InAlt] -> [InAlt] -> [InAlt]
forall a. [Alt a] -> [Alt a] -> [Alt a]
mergeAlts [InAlt]
outer_alts [InAlt]
wrapped_alts
                -- NB: mergeAlts gives priority to the left
                --      case x of
                --        A -> e1
                --        DEFAULT -> case x of
                --                      A -> e2
                --                      B -> e3
                -- When we merge, we must ensure that e1 takes
                -- precedence over e2 as the value for A!

        ; (OutExpr -> OutExpr) -> SimplM OutExpr -> SimplM OutExpr
forall a b. (a -> b) -> SimplM a -> SimplM b
forall (f :: * -> *) a b. Functor f => (a -> b) -> f a -> f b
fmap ([CoreTickish] -> OutExpr -> OutExpr
mkTicks [CoreTickish]
ticks) (SimplM OutExpr -> SimplM OutExpr)
-> SimplM OutExpr -> SimplM OutExpr
forall a b. (a -> b) -> a -> b
$
          SimplMode -> OutExpr -> Id -> OutType -> [InAlt] -> SimplM OutExpr
mkCase1 SimplMode
mode OutExpr
scrut Id
outer_bndr OutType
alts_ty [InAlt]
merged_alts
        }
        -- Warning: don't call mkCase recursively!
        -- Firstly, there's no point, because inner alts have already had
        -- mkCase applied to them, so they won't have a case in their default
        -- Secondly, if you do, you get an infinite loop, because the bindCaseBndr
        -- in munge_rhs may put a case into the DEFAULT branch!

mkCase SimplMode
mode OutExpr
scrut Id
bndr OutType
alts_ty [InAlt]
alts = SimplMode -> OutExpr -> Id -> OutType -> [InAlt] -> SimplM OutExpr
mkCase1 SimplMode
mode OutExpr
scrut Id
bndr OutType
alts_ty [InAlt]
alts

--------------------------------------------------
--      2. Eliminate Identity Case
--------------------------------------------------

mkCase1 :: SimplMode -> OutExpr -> Id -> OutType -> [InAlt] -> SimplM OutExpr
mkCase1 SimplMode
_mode OutExpr
scrut Id
case_bndr OutType
_ alts :: [InAlt]
alts@(Alt AltCon
_ [Id]
_ OutExpr
rhs1 : [InAlt]
alts')      -- Identity case
  | (InAlt -> Bool) -> [InAlt] -> Bool
forall (t :: * -> *) a. Foldable t => (a -> Bool) -> t a -> Bool
all InAlt -> Bool
identity_alt [InAlt]
alts
  = do { Tick -> SimplM ()
tick (Id -> Tick
CaseIdentity Id
case_bndr)
       ; OutExpr -> SimplM OutExpr
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return ([CoreTickish] -> OutExpr -> OutExpr
mkTicks [CoreTickish]
ticks (OutExpr -> OutExpr) -> OutExpr -> OutExpr
forall a b. (a -> b) -> a -> b
$ OutExpr -> OutExpr -> OutExpr
forall {b} {b}. Expr b -> Expr b -> Expr b
re_cast OutExpr
scrut OutExpr
rhs1) }
  where
    ticks :: [CoreTickish]
ticks = (InAlt -> [CoreTickish]) -> [InAlt] -> [CoreTickish]
forall (t :: * -> *) a b. Foldable t => (a -> [b]) -> t a -> [b]
concatMap (\(Alt AltCon
_ [Id]
_ OutExpr
rhs) -> (CoreTickish -> Bool) -> OutExpr -> [CoreTickish]
forall b. (CoreTickish -> Bool) -> Expr b -> [CoreTickish]
stripTicksT CoreTickish -> Bool
forall (pass :: TickishPass). GenTickish pass -> Bool
tickishFloatable OutExpr
rhs) [InAlt]
alts'
    identity_alt :: InAlt -> Bool
identity_alt (Alt AltCon
con [Id]
args OutExpr
rhs) = OutExpr -> AltCon -> [Id] -> Bool
check_eq OutExpr
rhs AltCon
con [Id]
args

    check_eq :: OutExpr -> AltCon -> [Id] -> Bool
check_eq (Cast OutExpr
rhs OutCoercion
co) AltCon
con [Id]
args        -- See Note [RHS casts]
      = Bool -> Bool
not ((Id -> Bool) -> [Id] -> Bool
forall (t :: * -> *) a. Foldable t => (a -> Bool) -> t a -> Bool
any (Id -> TyCoVarSet -> Bool
`elemVarSet` OutCoercion -> TyCoVarSet
tyCoVarsOfCo OutCoercion
co) [Id]
args) Bool -> Bool -> Bool
&& OutExpr -> AltCon -> [Id] -> Bool
check_eq OutExpr
rhs AltCon
con [Id]
args
    check_eq (Tick CoreTickish
t OutExpr
e) AltCon
alt [Id]
args
      = CoreTickish -> Bool
forall (pass :: TickishPass). GenTickish pass -> Bool
tickishFloatable CoreTickish
t Bool -> Bool -> Bool
&& OutExpr -> AltCon -> [Id] -> Bool
check_eq OutExpr
e AltCon
alt [Id]
args

    check_eq (Lit Literal
lit) (LitAlt Literal
lit') [Id]
_     = Literal
lit Literal -> Literal -> Bool
forall a. Eq a => a -> a -> Bool
== Literal
lit'
    check_eq (Var Id
v) AltCon
_ [Id]
_  | Id
v Id -> Id -> Bool
forall a. Eq a => a -> a -> Bool
== Id
case_bndr = Bool
True
    check_eq (Var Id
v)   (DataAlt DataCon
con) [Id]
args
      | [OutType] -> Bool
forall a. [a] -> Bool
forall (t :: * -> *) a. Foldable t => t a -> Bool
null [OutType]
arg_tys, [Id] -> Bool
forall a. [a] -> Bool
forall (t :: * -> *) a. Foldable t => t a -> Bool
null [Id]
args            = Id
v Id -> Id -> Bool
forall a. Eq a => a -> a -> Bool
== DataCon -> Id
dataConWorkId DataCon
con
                                             -- Optimisation only
    check_eq OutExpr
rhs        (DataAlt DataCon
con) [Id]
args = (CoreTickish -> Bool) -> OutExpr -> OutExpr -> Bool
forall b. (CoreTickish -> Bool) -> Expr b -> Expr b -> Bool
cheapEqExpr' CoreTickish -> Bool
forall (pass :: TickishPass). GenTickish pass -> Bool
tickishFloatable OutExpr
rhs (OutExpr -> Bool) -> OutExpr -> Bool
forall a b. (a -> b) -> a -> b
$
                                             DataCon -> [OutType] -> [Id] -> OutExpr
forall b. DataCon -> [OutType] -> [Id] -> Expr b
mkConApp2 DataCon
con [OutType]
arg_tys [Id]
args
    check_eq OutExpr
_          AltCon
_             [Id]
_    = Bool
False

    arg_tys :: [OutType]
arg_tys = (() :: Constraint) => OutType -> [OutType]
OutType -> [OutType]
tyConAppArgs (Id -> OutType
idType Id
case_bndr)

        -- Note [RHS casts]
        -- ~~~~~~~~~~~~~~~~
        -- We've seen this:
        --      case e of x { _ -> x `cast` c }
        -- And we definitely want to eliminate this case, to give
        --      e `cast` c
        -- So we throw away the cast from the RHS, and reconstruct
        -- it at the other end.  All the RHS casts must be the same
        -- if (all identity_alt alts) holds.
        --
        -- Don't worry about nested casts, because the simplifier combines them

    re_cast :: Expr b -> Expr b -> Expr b
re_cast Expr b
scrut (Cast Expr b
rhs OutCoercion
co) = Expr b -> OutCoercion -> Expr b
forall b. Expr b -> OutCoercion -> Expr b
Cast (Expr b -> Expr b -> Expr b
re_cast Expr b
scrut Expr b
rhs) OutCoercion
co
    re_cast Expr b
scrut Expr b
_             = Expr b
scrut

mkCase1 SimplMode
mode OutExpr
scrut Id
bndr OutType
alts_ty [InAlt]
alts = SimplMode -> OutExpr -> Id -> OutType -> [InAlt] -> SimplM OutExpr
mkCase2 SimplMode
mode OutExpr
scrut Id
bndr OutType
alts_ty [InAlt]
alts

--------------------------------------------------
--      2. Scrutinee Constant Folding
--------------------------------------------------

mkCase2 :: SimplMode -> OutExpr -> Id -> OutType -> [InAlt] -> SimplM OutExpr
mkCase2 SimplMode
mode OutExpr
scrut Id
bndr OutType
alts_ty [InAlt]
alts
  | -- See Note [Scrutinee Constant Folding]
    case [InAlt]
alts of
      [Alt AltCon
DEFAULT [Id]
_ OutExpr
_] -> Id -> Bool
isDeadBinder Id
bndr -- see wrinkle 1
      [InAlt]
_                 -> Bool
True
  , SimplMode -> Bool
sm_case_folding SimplMode
mode
  , Just (OutExpr
scrut', AltCon -> Maybe AltCon
tx_con, Id -> OutExpr
mk_orig) <- Platform
-> OutExpr
-> Maybe (OutExpr, AltCon -> Maybe AltCon, Id -> OutExpr)
caseRules (SimplMode -> Platform
smPlatform SimplMode
mode) OutExpr
scrut
  = do { Id
bndr' <- FastString -> OutType -> OutType -> SimplM Id
newId (String -> FastString
fsLit String
"lwild") OutType
ManyTy ((() :: Constraint) => OutExpr -> OutType
OutExpr -> OutType
exprType OutExpr
scrut')

       ; [InAlt]
alts' <- (InAlt -> SimplM (Maybe InAlt)) -> [InAlt] -> SimplM [InAlt]
forall (m :: * -> *) a b.
Applicative m =>
(a -> m (Maybe b)) -> [a] -> m [b]
mapMaybeM ((AltCon -> Maybe AltCon)
-> (Id -> OutExpr) -> Id -> InAlt -> SimplM (Maybe InAlt)
tx_alt AltCon -> Maybe AltCon
tx_con Id -> OutExpr
mk_orig Id
bndr') [InAlt]
alts
                  -- mapMaybeM: discard unreachable alternatives
                  -- See Note [Unreachable caseRules alternatives]
                  -- in GHC.Core.Opt.ConstantFold

       ; SimplMode -> OutExpr -> Id -> OutType -> [InAlt] -> SimplM OutExpr
mkCase3 SimplMode
mode OutExpr
scrut' Id
bndr' OutType
alts_ty ([InAlt] -> SimplM OutExpr) -> [InAlt] -> SimplM OutExpr
forall a b. (a -> b) -> a -> b
$
         [InAlt] -> [InAlt]
add_default ([InAlt] -> [InAlt]
re_sort [InAlt]
alts')
       }

  | Bool
otherwise
  = SimplMode -> OutExpr -> Id -> OutType -> [InAlt] -> SimplM OutExpr
mkCase3 SimplMode
mode OutExpr
scrut Id
bndr OutType
alts_ty [InAlt]
alts
  where
    -- We need to keep the correct association between the scrutinee and its
    -- binder if the latter isn't dead. Hence we wrap rhs of alternatives with
    -- "let bndr = ... in":
    --
    --     case v + 10 of y        =====> case v of y'
    --        20      -> e1                 10      -> let y = 20      in e1
    --        DEFAULT -> e2                 DEFAULT -> let y = y' + 10 in e2
    --
    -- This wrapping is done in tx_alt; we use mk_orig, returned by caseRules,
    -- to construct an expression equivalent to the original one, for use
    -- in the DEFAULT case

    tx_alt :: (AltCon -> Maybe AltCon) -> (Id -> CoreExpr) -> Id
           -> CoreAlt -> SimplM (Maybe CoreAlt)
    tx_alt :: (AltCon -> Maybe AltCon)
-> (Id -> OutExpr) -> Id -> InAlt -> SimplM (Maybe InAlt)
tx_alt AltCon -> Maybe AltCon
tx_con Id -> OutExpr
mk_orig Id
new_bndr (Alt AltCon
con [Id]
bs OutExpr
rhs)
      = case AltCon -> Maybe AltCon
tx_con AltCon
con of
          Maybe AltCon
Nothing   -> Maybe InAlt -> SimplM (Maybe InAlt)
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return Maybe InAlt
forall a. Maybe a
Nothing
          Just AltCon
con' -> do { [Id]
bs' <- Id -> AltCon -> SimplM [Id]
forall {m :: * -> *}. MonadUnique m => Id -> AltCon -> m [Id]
mk_new_bndrs Id
new_bndr AltCon
con'
                          ; Maybe InAlt -> SimplM (Maybe InAlt)
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return (InAlt -> Maybe InAlt
forall a. a -> Maybe a
Just (AltCon -> [Id] -> OutExpr -> InAlt
forall b. AltCon -> [b] -> Expr b -> Alt b
Alt AltCon
con' [Id]
bs' OutExpr
rhs')) }
      where
        rhs' :: OutExpr
rhs' | Id -> Bool
isDeadBinder Id
bndr = OutExpr
rhs
             | Bool
otherwise         = (() :: Constraint) => Id -> OutExpr -> OutExpr -> OutExpr
Id -> OutExpr -> OutExpr -> OutExpr
bindNonRec Id
bndr OutExpr
orig_val OutExpr
rhs

        orig_val :: OutExpr
orig_val = case AltCon
con of
                      AltCon
DEFAULT    -> Id -> OutExpr
mk_orig Id
new_bndr
                      LitAlt Literal
l   -> Literal -> OutExpr
forall b. Literal -> Expr b
Lit Literal
l
                      DataAlt DataCon
dc -> DataCon -> [OutType] -> [Id] -> OutExpr
forall b. DataCon -> [OutType] -> [Id] -> Expr b
mkConApp2 DataCon
dc ((() :: Constraint) => OutType -> [OutType]
OutType -> [OutType]
tyConAppArgs (Id -> OutType
idType Id
bndr)) [Id]
bs

    mk_new_bndrs :: Id -> AltCon -> m [Id]
mk_new_bndrs Id
new_bndr (DataAlt DataCon
dc)
      | Bool -> Bool
not (DataCon -> Bool
isNullaryRepDataCon DataCon
dc)
      = -- For non-nullary data cons we must invent some fake binders
        -- See Note [caseRules for dataToTag] in GHC.Core.Opt.ConstantFold
        do { [Unique]
us <- m [Unique]
forall (m :: * -> *). MonadUnique m => m [Unique]
getUniquesM
           ; let ([Id]
ex_tvs, [Id]
arg_ids) = [Unique] -> OutType -> DataCon -> [OutType] -> ([Id], [Id])
dataConRepInstPat [Unique]
us (Id -> OutType
idMult Id
new_bndr) DataCon
dc
                                        ((() :: Constraint) => OutType -> [OutType]
OutType -> [OutType]
tyConAppArgs (Id -> OutType
idType Id
new_bndr))
           ; [Id] -> m [Id]
forall a. a -> m a
forall (m :: * -> *) a. Monad m => a -> m a
return ([Id]
ex_tvs [Id] -> [Id] -> [Id]
forall a. [a] -> [a] -> [a]
++ [Id]
arg_ids) }
    mk_new_bndrs Id
_ AltCon
_ = [Id] -> m [Id]
forall a. a -> m a
forall (m :: * -> *) a. Monad m => a -> m a
return []

    re_sort :: [CoreAlt] -> [CoreAlt]
    -- Sort the alternatives to re-establish
    -- GHC.Core Note [Case expression invariants]
    re_sort :: [InAlt] -> [InAlt]
re_sort [InAlt]
alts = (InAlt -> InAlt -> Ordering) -> [InAlt] -> [InAlt]
forall a. (a -> a -> Ordering) -> [a] -> [a]
sortBy InAlt -> InAlt -> Ordering
forall a. Alt a -> Alt a -> Ordering
cmpAlt [InAlt]
alts

    add_default :: [CoreAlt] -> [CoreAlt]
    -- See Note [Literal cases]
    add_default :: [InAlt] -> [InAlt]
add_default (Alt (LitAlt {}) [Id]
bs OutExpr
rhs : [InAlt]
alts) = AltCon -> [Id] -> OutExpr -> InAlt
forall b. AltCon -> [b] -> Expr b -> Alt b
Alt AltCon
DEFAULT [Id]
bs OutExpr
rhs InAlt -> [InAlt] -> [InAlt]
forall a. a -> [a] -> [a]
: [InAlt]
alts
    add_default [InAlt]
alts                            = [InAlt]
alts

{- Note [Literal cases]
~~~~~~~~~~~~~~~~~~~~~~~
If we have
  case tagToEnum (a ># b) of
     False -> e1
     True  -> e2

then caseRules for TagToEnum will turn it into
  case tagToEnum (a ># b) of
     0# -> e1
     1# -> e2

Since the case is exhaustive (all cases are) we can convert it to
  case tagToEnum (a ># b) of
     DEFAULT -> e1
     1#      -> e2

This may generate slightly better code (although it should not, since
all cases are exhaustive) and/or optimise better.  I'm not certain that
it's necessary, but currently we do make this change.  We do it here,
NOT in the TagToEnum rules (see "Beware" in Note [caseRules for tagToEnum]
in GHC.Core.Opt.ConstantFold)
-}

--------------------------------------------------
--      Catch-all
--------------------------------------------------
mkCase3 :: SimplMode -> OutExpr -> Id -> OutType -> [InAlt] -> SimplM OutExpr
mkCase3 SimplMode
_mode OutExpr
scrut Id
bndr OutType
alts_ty [InAlt]
alts
  = OutExpr -> SimplM OutExpr
forall a. a -> SimplM a
forall (m :: * -> *) a. Monad m => a -> m a
return (OutExpr -> Id -> OutType -> [InAlt] -> OutExpr
forall b. Expr b -> b -> OutType -> [Alt b] -> Expr b
Case OutExpr
scrut Id
bndr OutType
alts_ty [InAlt]
alts)

-- See Note [Exitification] and Note [Do not inline exit join points] in
-- GHC.Core.Opt.Exitify
-- This lives here (and not in Id) because occurrence info is only valid on
-- InIds, so it's crucial that isExitJoinId is only called on freshly
-- occ-analysed code. It's not a generic function you can call anywhere.
isExitJoinId :: Var -> Bool
isExitJoinId :: Id -> Bool
isExitJoinId Id
id
  = Id -> Bool
isJoinId Id
id
  Bool -> Bool -> Bool
&& OccInfo -> Bool
isOneOcc (Id -> OccInfo
idOccInfo Id
id)
  Bool -> Bool -> Bool
&& OccInfo -> InsideLam
occ_in_lam (Id -> OccInfo
idOccInfo Id
id) InsideLam -> InsideLam -> Bool
forall a. Eq a => a -> a -> Bool
== InsideLam
IsInsideLam

{-
Note [Dead binders]
~~~~~~~~~~~~~~~~~~~~
Note that dead-ness is maintained by the simplifier, so that it is
accurate after simplification as well as before.


Note [Cascading case merge]
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Case merging should cascade in one sweep, because it
happens bottom-up

      case e of a {
        DEFAULT -> case a of b
                      DEFAULT -> case b of c {
                                     DEFAULT -> e
                                     A -> ea
                      B -> eb
        C -> ec
==>
      case e of a {
        DEFAULT -> case a of b
                      DEFAULT -> let c = b in e
                      A -> let c = b in ea
                      B -> eb
        C -> ec
==>
      case e of a {
        DEFAULT -> let b = a in let c = b in e
        A -> let b = a in let c = b in ea
        B -> let b = a in eb
        C -> ec


However here's a tricky case that we still don't catch, and I don't
see how to catch it in one pass:

  case x of c1 { I# a1 ->
  case a1 of c2 ->
    0 -> ...
    DEFAULT -> case x of c3 { I# a2 ->
               case a2 of ...

After occurrence analysis (and its binder-swap) we get this

  case x of c1 { I# a1 ->
  let x = c1 in         -- Binder-swap addition
  case a1 of c2 ->
    0 -> ...
    DEFAULT -> case x of c3 { I# a2 ->
               case a2 of ...

When we simplify the inner case x, we'll see that
x=c1=I# a1.  So we'll bind a2 to a1, and get

  case x of c1 { I# a1 ->
  case a1 of c2 ->
    0 -> ...
    DEFAULT -> case a1 of ...

This is correct, but we can't do a case merge in this sweep
because c2 /= a1.  Reason: the binding c1=I# a1 went inwards
without getting changed to c1=I# c2.

I don't think this is worth fixing, even if I knew how. It'll
all come out in the next pass anyway.
-}