http-client-0.6.1.1: An HTTP client engine

Safe HaskellNone
LanguageHaskell2010

Network.HTTP.Client

Contents

Description

Simpler API

The API below is rather low-level. The Network.HTTP.Simple module (from the http-conduit package) provides a higher-level API with built-in support for things like JSON request and response bodies. For most users, this will be an easier place to start. You can read the tutorial at:

https://haskell-lang.org/library/http-client

Lower-level API

This is the main entry point for using http-client. Used by itself, this module provides low-level access for streaming request and response bodies, and only non-secure HTTP connections. Helper packages such as http-conduit provide higher level streaming approaches, while other helper packages like http-client-tls provide secure connections.

There are three core components to be understood here: requests, responses, and managers. A Manager keeps track of open connections to various hosts, and when requested, will provide either an existing open connection or create a new connection on demand. A Manager also automatically reaps connections which have been unused for a certain period of time. A Manager allows for more efficient HTTP usage by allowing for keep-alive connections. Secure HTTP connections can be allowed by modifying the settings used for creating a manager. The simplest way to create a Manager is with:

newManager defaultManagerSettings

While generally speaking it is a good idea to share a single Manager throughout your application, there are cases where it makes more sense to create and destroy Managers more frequently. As an example, if you have an application which will make a large number of requests to different hosts, and will never make more than one connection to a single host, then sharing a Manager will result in idle connections being kept open longer than necessary. In such a situation, it makes sense to use newManager before each new request, to avoid running out of file descriptors. (Note that the managerIdleConnectionCount setting mitigates the risk of leaking too many file descriptors.)

The next core component is a Request, which represents a single HTTP request to be sent to a specific server. Requests allow for many settings to control exact how they function, but usually the simplest approach for creating a Request is to use parseRequest.

Finally, a Response is the result of sending a single Request to a server, over a connection which was acquired from a Manager. Note that you must close the response when you're done with it to ensure that the connection is recycled to the Manager to either be used by another request, or to be reaped. Usage of withResponse will ensure that this happens automatically.

Helper packages may provide replacements for various recommendations listed above. For example, if using http-client-tls, instead of using defaultManagerSettings, you would want to use tlsManagerSettings. Be sure to read the relevant helper library documentation for more information.

A note on exceptions: for the most part, all actions that perform I/O should be assumed to throw an HttpException in the event of some problem, and all pure functions will be total. For example, withResponse, httpLbs, and BodyReader can all throw exceptions. Functions like responseStatus and applyBasicAuth are guaranteed to be total (or there's a bug in the library).

One thing to be cautioned about: the type of parseRequest allows it to work in different monads. If used in the IO monad, it will throw an exception in the case of an invalid URI. In addition, if you leverage the IsString instance of the Request value via OverloadedStrings, an invalid URI will result in a partial value. Caveat emptor!

Synopsis

Documentation

Example Usage

Making a GET request

import Network.HTTP.Client
import Network.HTTP.Types.Status (statusCode)

main :: IO ()
main = do
  manager <- newManager defaultManagerSettings

  request <- parseRequest "http://httpbin.org/get"
  response <- httpLbs request manager

  putStrLn $ "The status code was: " ++ (show $ statusCode $ responseStatus response)
  print $ responseBody response

Posting JSON to a server

{-# LANGUAGE OverloadedStrings #-}
import Network.HTTP.Client
import Network.HTTP.Types.Status (statusCode)
import Data.Aeson (object, (.=), encode)
import Data.Text (Text)

main :: IO ()
main = do
  manager <- newManager defaultManagerSettings

  -- Create the request
  let requestObject = object ["name" .= "Michael", "age" .= 30]
  let requestObject = object
   [ "name" .= ("Michael" :: Text)
   , "age"  .= (30 :: Int)
   ]

  initialRequest <- parseRequest "http://httpbin.org/post"
  let request = initialRequest { method = "POST", requestBody = RequestBodyLBS $ encode requestObject }

  response <- httpLbs request manager
  putStrLn $ "The status code was: " ++ (show $ statusCode $ responseStatus response)
  print $ responseBody response

Performing requests

withResponse :: Request -> Manager -> (Response BodyReader -> IO a) -> IO a Source #

Perform a Request using a connection acquired from the given Manager, and then provide the Response to the given function. This function is fully exception safe, guaranteeing that the response will be closed when the inner function exits. It is defined as:

withResponse req man f = bracket (responseOpen req man) responseClose f

It is recommended that you use this function in place of explicit calls to responseOpen and responseClose.

You will need to use functions such as brRead to consume the response body.

Since 0.1.0

httpLbs :: Request -> Manager -> IO (Response ByteString) Source #

A convenience wrapper around withResponse which reads in the entire response body and immediately closes the connection. Note that this function performs fully strict I/O, and only uses a lazy ByteString in its response for memory efficiency. If you are anticipating a large response body, you are encouraged to use withResponse and brRead instead.

Since 0.1.0

httpNoBody :: Request -> Manager -> IO (Response ()) Source #

A convenient wrapper around withResponse which ignores the response body. This is useful, for example, when performing a HEAD request.

Since 0.3.2

responseOpen :: Request -> Manager -> IO (Response BodyReader) Source #

The most low-level function for initiating an HTTP request.

The first argument to this function gives a full specification on the request: the host to connect to, whether to use SSL, headers, etc. Please see Request for full details. The second argument specifies which Manager should be used.

This function then returns a Response with a BodyReader. The Response contains the status code and headers that were sent back to us, and the BodyReader contains the body of the request. Note that this BodyReader allows you to have fully interleaved IO actions during your HTTP download, making it possible to download very large responses in constant memory.

An important note: the response body returned by this function represents a live HTTP connection. As such, if you do not use the response body, an open socket will be retained indefinitely. You must be certain to call responseClose on this response to free up resources.

This function automatically performs any necessary redirects, as specified by the redirectCount setting.

When implementing a (reverse) proxy using this function or relating functions, it's wise to remove Transfer-Encoding:, Content-Length:, Content-Encoding: and Accept-Encoding: from request and response headers to be relayed.

Since 0.1.0

responseClose :: Response a -> IO () Source #

Close any open resources associated with the given Response. In general, this will either close an active Connection or return it to the Manager to be reused.

Since 0.1.0

Tracking redirect history

withResponseHistory :: Request -> Manager -> (HistoriedResponse BodyReader -> IO a) -> IO a Source #

A variant of withResponse which keeps a history of all redirects performed in the interim, together with the first 1024 bytes of their response bodies.

Since 0.4.1

responseOpenHistory :: Request -> Manager -> IO (HistoriedResponse BodyReader) Source #

A variant of responseOpen which keeps a history of all redirects performed in the interim, together with the first 1024 bytes of their response bodies.

Since 0.4.1

data HistoriedResponse body Source #

A datatype holding information on redirected requests and the final response.

Since 0.4.1

Instances
Functor HistoriedResponse Source # 
Instance details

Defined in Network.HTTP.Client

Foldable HistoriedResponse Source # 
Instance details

Defined in Network.HTTP.Client

Methods

fold :: Monoid m => HistoriedResponse m -> m #

foldMap :: Monoid m => (a -> m) -> HistoriedResponse a -> m #

foldr :: (a -> b -> b) -> b -> HistoriedResponse a -> b #

foldr' :: (a -> b -> b) -> b -> HistoriedResponse a -> b #

foldl :: (b -> a -> b) -> b -> HistoriedResponse a -> b #

foldl' :: (b -> a -> b) -> b -> HistoriedResponse a -> b #

foldr1 :: (a -> a -> a) -> HistoriedResponse a -> a #

foldl1 :: (a -> a -> a) -> HistoriedResponse a -> a #

toList :: HistoriedResponse a -> [a] #

null :: HistoriedResponse a -> Bool #

length :: HistoriedResponse a -> Int #

elem :: Eq a => a -> HistoriedResponse a -> Bool #

maximum :: Ord a => HistoriedResponse a -> a #

minimum :: Ord a => HistoriedResponse a -> a #

sum :: Num a => HistoriedResponse a -> a #

product :: Num a => HistoriedResponse a -> a #

Traversable HistoriedResponse Source # 
Instance details

Defined in Network.HTTP.Client

Methods

traverse :: Applicative f => (a -> f b) -> HistoriedResponse a -> f (HistoriedResponse b) #

sequenceA :: Applicative f => HistoriedResponse (f a) -> f (HistoriedResponse a) #

mapM :: Monad m => (a -> m b) -> HistoriedResponse a -> m (HistoriedResponse b) #

sequence :: Monad m => HistoriedResponse (m a) -> m (HistoriedResponse a) #

Show body => Show (HistoriedResponse body) Source # 
Instance details

Defined in Network.HTTP.Client

Generic (HistoriedResponse body) Source # 
Instance details

Defined in Network.HTTP.Client

Associated Types

type Rep (HistoriedResponse body) :: Type -> Type #

Methods

from :: HistoriedResponse body -> Rep (HistoriedResponse body) x #

to :: Rep (HistoriedResponse body) x -> HistoriedResponse body #

type Rep (HistoriedResponse body) Source # 
Instance details

Defined in Network.HTTP.Client

type Rep (HistoriedResponse body) = D1 (MetaData "HistoriedResponse" "Network.HTTP.Client" "http-client-0.6.1.1-DvhxYAcH5pC9Am3LTkHsix" False) (C1 (MetaCons "HistoriedResponse" PrefixI True) (S1 (MetaSel (Just "hrRedirects") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 [(Request, Response ByteString)]) :*: (S1 (MetaSel (Just "hrFinalRequest") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 Request) :*: S1 (MetaSel (Just "hrFinalResponse") NoSourceUnpackedness NoSourceStrictness DecidedLazy) (Rec0 (Response body)))))

hrRedirects :: HistoriedResponse body -> [(Request, Response ByteString)] Source #

Requests which resulted in a redirect, together with their responses. The response contains the first 1024 bytes of the body.

Since 0.4.1

hrFinalRequest :: HistoriedResponse body -> Request Source #

The final request performed.

Since 0.4.1

hrFinalResponse :: HistoriedResponse body -> Response body Source #

The response from the final request.

Since 0.4.1

Connection manager

data Manager Source #

Keeps track of open connections for keep-alive.

If possible, you should share a single Manager between multiple threads and requests.

Since 0.1.0

Instances
HasHttpManager Manager Source # 
Instance details

Defined in Network.HTTP.Client.Types

newManager :: ManagerSettings -> IO Manager Source #

Create a Manager. The Manager will be shut down automatically via garbage collection.

Creating a new Manager is a relatively expensive operation, you are advised to share a single Manager between requests instead.

The first argument to this function is often defaultManagerSettings, though add-on libraries may provide a recommended replacement.

Since 0.1.0

closeManager :: Manager -> IO () Source #

Deprecated: Manager will be closed for you automatically when no longer in use

Close all connections in a Manager.

Note that this doesn't affect currently in-flight connections, meaning you can safely use it without hurting any queries you may have concurrently running.

Since 0.1.0

withManager :: ManagerSettings -> (Manager -> IO a) -> IO a Source #

Deprecated: Use newManager instead

Create, use and close a Manager.

Since 0.2.1

class HasHttpManager a where Source #

Instances
HasHttpManager Manager Source # 
Instance details

Defined in Network.HTTP.Client.Types

Connection manager settings

data ManagerSettings Source #

Settings for a Manager. Please use the defaultManagerSettings function and then modify individual settings. For more information, see http://www.yesodweb.com/book/settings-types.

Since 0.1.0

defaultManagerSettings :: ManagerSettings Source #

Default value for ManagerSettings.

Note that this value does not have support for SSL/TLS. If you need to make any https connections, please use the http-client-tls package, which provides a tlsManagerSettings value.

Since 0.1.0

managerConnCount :: ManagerSettings -> Int Source #

Number of connections to a single host to keep alive. Default: 10.

Since 0.1.0

managerRawConnection :: ManagerSettings -> IO (Maybe HostAddress -> String -> Int -> IO Connection) Source #

Create an insecure connection.

Since 0.1.0

managerTlsConnection :: ManagerSettings -> IO (Maybe HostAddress -> String -> Int -> IO Connection) Source #

Create a TLS connection. Default behavior: throw an exception that TLS is not supported.

Since 0.1.0

managerResponseTimeout :: ManagerSettings -> ResponseTimeout Source #

Default timeout to be applied to requests which do not provide a timeout value.

Default is 30 seconds

Since: 0.5.0

managerRetryableException :: ManagerSettings -> SomeException -> Bool Source #

Exceptions for which we should retry our request if we were reusing an already open connection. In the case of IOExceptions, for example, we assume that the connection was closed on the server and therefore open a new one.

Since 0.1.0

managerWrapException :: ManagerSettings -> forall a. Request -> IO a -> IO a Source #

Action wrapped around all attempted Requests, usually used to wrap up exceptions in library-specific types.

Default: wrap all IOExceptions in the InternalException constructor.

Since: 0.5.0

managerIdleConnectionCount :: ManagerSettings -> Int Source #

Total number of idle connection to keep open at a given time.

This limit helps deal with the case where you are making a large number of connections to different hosts. Without this limit, you could run out of file descriptors. Additionally, it can be set to zero to prevent reuse of any connections. Doing this is useful when the server your application is talking to sits behind a load balancer.

Default: 512

Since 0.3.7

managerModifyRequest :: ManagerSettings -> Request -> IO Request Source #

Perform the given modification to a Request before performing it.

Default: no modification

Since 0.4.4

managerModifyResponse :: ManagerSettings -> Response BodyReader -> IO (Response BodyReader) Source #

Perform the given modification to a Response after receiving it.

Default: no modification

Since: 0.5.5

Manager proxy settings

managerSetProxy :: ProxyOverride -> ManagerSettings -> ManagerSettings Source #

Set the proxy override value, for both HTTP (insecure) and HTTPS (insecure) connections.

Since 0.4.7

managerSetInsecureProxy :: ProxyOverride -> ManagerSettings -> ManagerSettings Source #

Set the proxy override value, only for HTTP (insecure) connections.

Since 0.4.7

managerSetSecureProxy :: ProxyOverride -> ManagerSettings -> ManagerSettings Source #

Set the proxy override value, only for HTTPS (secure) connections.

Since 0.4.7

data ProxyOverride Source #

How the HTTP proxy server settings should be discovered.

Since 0.4.7

proxyFromRequest :: ProxyOverride Source #

Get the proxy settings from the Request itself.

Since 0.4.7

noProxy :: ProxyOverride Source #

Never connect using a proxy, regardless of the proxy value in the Request.

Since 0.4.7

useProxy :: Proxy -> ProxyOverride Source #

Use the given proxy settings, regardless of the proxy value in the Request.

Since 0.4.7

proxyEnvironment Source #

Arguments

:: Maybe Proxy

fallback if no environment set

-> ProxyOverride 

Get the proxy settings from the default environment variable (http_proxy for insecure, https_proxy for secure). If no variable is set, then fall back to the given value. Nothing is equivalent to noProxy, Just is equivalent to useProxy.

Since 0.4.7

proxyEnvironmentNamed Source #

Arguments

:: Text

environment variable name

-> Maybe Proxy

fallback if no environment set

-> ProxyOverride 

Same as proxyEnvironment, but instead of default environment variable names, allows you to set your own name.

Since 0.4.7

defaultProxy :: ProxyOverride Source #

The default proxy settings for a manager. In particular: if the http_proxy (or https_proxy) environment variable is set, use it. Otherwise, use the values in the Request.

Since 0.4.7

Response timeouts

data ResponseTimeout Source #

How to deal with timing out a response

Since: 0.5.0

responseTimeoutMicro :: Int -> ResponseTimeout Source #

Specify a response timeout in microseconds

Since: 0.5.0

responseTimeoutNone :: ResponseTimeout Source #

Do not have a response timeout

Since: 0.5.0

responseTimeoutDefault :: ResponseTimeout Source #

Use the default response timeout

When used on a Request, means: use the manager's timeout value

When used on a ManagerSettings, means: default to 30 seconds

Since: 0.5.0

Helpers

rawConnectionModifySocket :: (Socket -> IO ()) -> IO (Maybe HostAddress -> String -> Int -> IO Connection) Source #

A value for the managerRawConnection setting, but also allows you to modify the underlying Socket to set additional settings. For a motivating use case, see: https://github.com/snoyberg/http-client/issues/71.

Since 0.3.8

rawConnectionModifySocketSize :: (Socket -> IO ()) -> IO (Int -> Maybe HostAddress -> String -> Int -> IO Connection) Source #

Same as rawConnectionModifySocket, but also takes in a chunk size.

Since: 0.5.2

Request

The way you parse string of characters to construct a Request will determine whether exceptions will be thrown on non-2XX response status codes. This is because the behavior is controlled by a setting in Request itself (see checkResponse) and different parsing functions set it to different IO actions.

parseUrl :: MonadThrow m => String -> m Request Source #

Deprecated: Please use parseUrlThrow, parseRequest, or parseRequest_ instead

Deprecated synonym for parseUrlThrow. You probably want parseRequest or parseRequest_ instead.

Since: 0.1.0

parseUrlThrow :: MonadThrow m => String -> m Request Source #

Same as parseRequest, except will throw an HttpException in the event of a non-2XX response. This uses throwErrorStatusCodes to implement checkResponse.

Since: 0.4.30

parseRequest :: MonadThrow m => String -> m Request Source #

Convert a URL into a Request.

This function defaults some of the values in Request, such as setting method to GET and requestHeaders to [].

Since this function uses MonadThrow, the return monad can be anything that is an instance of MonadThrow, such as IO or Maybe.

You can place the request method at the beginning of the URL separated by a space, e.g.:

@@ parseRequest "POST http://httpbin.org/post" @@

Note that the request method must be provided as all capital letters.

A Request created by this function won't cause exceptions on non-2XX response status codes.

To create a request which throws on non-2XX status codes, see parseUrlThrow

Since: 0.4.30

parseRequest_ :: String -> Request Source #

Same as parseRequest, but parse errors cause an impure exception. Mostly useful for static strings which are known to be correctly formatted.

requestFromURI :: MonadThrow m => URI -> m Request Source #

Convert a URI into a Request.

This can fail if the given URI is not absolute, or if the URI scheme is not "http" or "https". In these cases the function will throw an error via MonadThrow.

This function defaults some of the values in Request, such as setting method to GET and requestHeaders to [].

A Request created by this function won't cause exceptions on non-2XX response status codes.

Since: 0.5.12

requestFromURI_ :: URI -> Request Source #

Same as requestFromURI, but if the conversion would fail, throws an impure exception.

Since: 0.5.12

defaultRequest :: Request Source #

A default request value, a GET request of localhost/:80, with an empty request body.

Note that the default checkResponse does nothing.

Since: 0.4.30

applyBasicAuth :: ByteString -> ByteString -> Request -> Request Source #

Add a Basic Auth header (with the specified user name and password) to the given Request. Ignore error handling:

 applyBasicAuth "user" "pass" $ parseRequest_ url

NOTE: The function applyDigestAuth is provided by the http-client-tls package instead of this package due to extra dependencies. Please use that package if you need to use digest authentication.

Since 0.1.0

urlEncodedBody :: [(ByteString, ByteString)] -> Request -> Request Source #

Add url-encoded parameters to the Request.

This sets a new requestBody, adds a content-type request header and changes the method to POST.

Since 0.1.0

getUri :: Request -> URI Source #

Extract a URI from the request.

Since 0.1.0

setRequestIgnoreStatus :: Request -> Request Source #

Modify the request so that non-2XX status codes do not generate a runtime StatusCodeException.

Since: 0.4.29

setRequestCheckStatus :: Request -> Request Source #

Modify the request so that non-2XX status codes generate a runtime StatusCodeException, by using throwErrorStatusCodes

Since: 0.5.13

setQueryString :: [(ByteString, Maybe ByteString)] -> Request -> Request Source #

Set the query string to the given key/value pairs.

Since 0.3.6

setQueryStringPartialEscape :: [(ByteString, [EscapeItem])] -> Request -> Request Source #

Set the query string to the given key/value pairs.

Since: 0.5.10

Request type and fields

data Request Source #

All information on how to connect to a host and what should be sent in the HTTP request.

If you simply wish to download from a URL, see parseRequest.

The constructor for this data type is not exposed. Instead, you should use either the defaultRequest value, or parseRequest to construct from a URL, and then use the records below to make modifications. This approach allows http-client to add configuration options without breaking backwards compatibility.

For example, to construct a POST request, you could do something like:

initReq <- parseRequest "http://www.example.com/path"
let req = initReq
            { method = "POST"
            }

For more information, please see http://www.yesodweb.com/book/settings-types.

Since 0.1.0

Instances
Show Request Source # 
Instance details

Defined in Network.HTTP.Client.Types

IsString Request Source #

Parses a URL via parseRequest_

NOTE: Prior to version 0.5.0, this instance used parseUrlThrow instead.

Instance details

Defined in Network.HTTP.Client.Request

Methods

fromString :: String -> Request #

method :: Request -> Method Source #

HTTP request method, eg GET, POST.

Since 0.1.0

secure :: Request -> Bool Source #

Whether to use HTTPS (ie, SSL).

Since 0.1.0

host :: Request -> ByteString Source #

Requested host name, used for both the IP address to connect to and the host request header.

Since 0.1.0

port :: Request -> Int Source #

The port to connect to. Also used for generating the host request header.

Since 0.1.0

path :: Request -> ByteString Source #

Everything from the host to the query string.

Since 0.1.0

queryString :: Request -> ByteString Source #

Query string appended to the path.

Since 0.1.0

requestHeaders :: Request -> RequestHeaders Source #

Custom HTTP request headers

The Content-Length and Transfer-Encoding headers are set automatically by this module, and shall not be added to requestHeaders.

If not provided by the user, Host will automatically be set based on the host and port fields.

Moreover, the Accept-Encoding header is set implicitly to gzip for convenience by default. This behaviour can be overridden if needed, by setting the header explicitly to a different value. In order to omit the Accept-Header altogether, set it to the empty string "". If you need an empty Accept-Header (i.e. requesting the identity encoding), set it to a non-empty white-space string, e.g. " ". See RFC 2616 section 14.3 for details about the semantics of the Accept-Header field. If you request a content-encoding not supported by this module, you will have to decode it yourself (see also the decompress field).

Note: Multiple header fields with the same field-name will result in multiple header fields being sent and therefore it's the responsibility of the client code to ensure that the rules from RFC 2616 section 4.2 are honoured.

Since 0.1.0

requestBody :: Request -> RequestBody Source #

Request body to be sent to the server.

Since 0.1.0

proxy :: Request -> Maybe Proxy Source #

Optional HTTP proxy.

Since 0.1.0

applyBasicProxyAuth :: ByteString -> ByteString -> Request -> Request Source #

Add a Proxy-Authorization header (with the specified username and password) to the given Request. Ignore error handling:

applyBasicProxyAuth "user" "pass" <$> parseRequest "http://example.org"

Since 0.3.4

decompress :: Request -> ByteString -> Bool Source #

Predicate to specify whether gzipped data should be decompressed on the fly (see alwaysDecompress and browserDecompress). Argument is the mime type. Default: browserDecompress.

Since 0.1.0

redirectCount :: Request -> Int Source #

How many redirects to follow when getting a resource. 0 means follow no redirects. Default value: 10.

Since 0.1.0

checkResponse :: Request -> Request -> Response BodyReader -> IO () Source #

Check the response immediately after receiving the status and headers. This can be useful for throwing exceptions on non-success status codes.

In previous versions of http-client, this went under the name checkStatus, but was renamed to avoid confusion about the new default behavior (doing nothing).

Since: 0.5.0

responseTimeout :: Request -> ResponseTimeout Source #

Number of microseconds to wait for a response. If Nothing, will wait indefinitely. Default: use managerResponseTimeout (which by default is 30 seconds).

Since 0.1.0

cookieJar :: Request -> Maybe CookieJar Source #

A user-defined cookie jar. If Nothing, no cookie handling will take place, "Cookie" headers in requestHeaders will be sent raw, and responseCookieJar will be empty.

Since 0.1.0

requestVersion :: Request -> HttpVersion Source #

HTTP version to send to server.

Default: HTTP 1.1

Since 0.4.3

Request body

data RequestBody Source #

When using one of the RequestBodyStream / RequestBodyStreamChunked constructors, you must ensure that the GivesPopper can be called multiple times. Usually this is not a problem.

The RequestBodyStreamChunked will send a chunked request body. Note that not all servers support this. Only use RequestBodyStreamChunked if you know the server you're sending to supports chunked request bodies.

Since 0.1.0

Constructors

RequestBodyLBS ByteString 
RequestBodyBS ByteString 
RequestBodyBuilder Int64 Builder 
RequestBodyStream Int64 (GivesPopper ()) 
RequestBodyStreamChunked (GivesPopper ()) 
RequestBodyIO (IO RequestBody)

Allows creation of a RequestBody inside the IO monad, which is useful for making easier APIs (like setRequestBodyFile).

Since: 0.4.28

type Popper = IO ByteString Source #

A function which generates successive chunks of a request body, provider a single empty bytestring when no more data is available.

Since 0.1.0

type NeedsPopper a = Popper -> IO a Source #

A function which must be provided with a Popper.

Since 0.1.0

type GivesPopper a = NeedsPopper a -> IO a Source #

A function which will provide a Popper to a NeedsPopper. This seemingly convoluted structure allows for creation of request bodies which allocate scarce resources in an exception safe manner.

Since 0.1.0

streamFile :: FilePath -> IO RequestBody Source #

Send a file as the request body.

It is expected that the file size does not change between calling streamFile and making any requests using this request body.

Since 0.4.9

observedStreamFile :: (StreamFileStatus -> IO ()) -> FilePath -> IO RequestBody Source #

Send a file as the request body, while observing streaming progress via a PopObserver. Observations are made between reading and sending a chunk.

It is expected that the file size does not change between calling observedStreamFile and making any requests using this request body.

Since 0.4.9

Response

data Response body Source #

A simple representation of the HTTP response.

Since 0.1.0

Instances
Functor Response Source # 
Instance details

Defined in Network.HTTP.Client.Types

Methods

fmap :: (a -> b) -> Response a -> Response b #

(<$) :: a -> Response b -> Response a #

Foldable Response Source # 
Instance details

Defined in Network.HTTP.Client.Types

Methods

fold :: Monoid m => Response m -> m #

foldMap :: Monoid m => (a -> m) -> Response a -> m #

foldr :: (a -> b -> b) -> b -> Response a -> b #

foldr' :: (a -> b -> b) -> b -> Response a -> b #

foldl :: (b -> a -> b) -> b -> Response a -> b #

foldl' :: (b -> a -> b) -> b -> Response a -> b #

foldr1 :: (a -> a -> a) -> Response a -> a #

foldl1 :: (a -> a -> a) -> Response a -> a #

toList :: Response a -> [a] #

null :: Response a -> Bool #

length :: Response a -> Int #

elem :: Eq a => a -> Response a -> Bool #

maximum :: Ord a => Response a -> a #

minimum :: Ord a => Response a -> a #

sum :: Num a => Response a -> a #

product :: Num a => Response a -> a #

Traversable Response Source # 
Instance details

Defined in Network.HTTP.Client.Types

Methods

traverse :: Applicative f => (a -> f b) -> Response a -> f (Response b) #

sequenceA :: Applicative f => Response (f a) -> f (Response a) #

mapM :: Monad m => (a -> m b) -> Response a -> m (Response b) #

sequence :: Monad m => Response (m a) -> m (Response a) #

Eq body => Eq (Response body) Source # 
Instance details

Defined in Network.HTTP.Client.Types

Methods

(==) :: Response body -> Response body -> Bool #

(/=) :: Response body -> Response body -> Bool #

Show body => Show (Response body) Source # 
Instance details

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> Response body -> ShowS #

show :: Response body -> String #

showList :: [Response body] -> ShowS #

responseStatus :: Response body -> Status Source #

Status code of the response.

Since 0.1.0

responseVersion :: Response body -> HttpVersion Source #

HTTP version used by the server.

Since 0.1.0

responseHeaders :: Response body -> ResponseHeaders Source #

Response headers sent by the server.

Since 0.1.0

responseBody :: Response body -> body Source #

Response body sent by the server.

Since 0.1.0

responseCookieJar :: Response body -> CookieJar Source #

Cookies set on the client after interacting with the server. If cookies have been disabled by setting cookieJar to Nothing, then this will always be empty.

Since 0.1.0

throwErrorStatusCodes :: MonadIO m => Request -> Response BodyReader -> m () Source #

Throws a StatusCodeException wrapped in HttpExceptionRequest, if the response's status code indicates an error (if it isn't 2xx). This can be used to implement checkResponse.

Since: 0.5.13

Response body

type BodyReader = IO ByteString Source #

An IO action that represents an incoming response body coming from the server. Data provided by this action has already been gunzipped and de-chunked, and respects any content-length headers present.

The action gets a single chunk of data from the response body, or an empty bytestring if no more data is available.

Since 0.4.0

brRead :: BodyReader -> IO ByteString Source #

Get a single chunk of data from the response body, or an empty bytestring if no more data is available.

Note that in order to consume the entire request body, you will need to repeatedly call this function until you receive an empty ByteString as a result.

Since 0.1.0

brReadSome :: BodyReader -> Int -> IO ByteString Source #

Continuously call brRead, building up a lazy ByteString until a chunk is constructed that is at least as many bytes as requested.

Since 0.4.20

brConsume :: BodyReader -> IO [ByteString] Source #

Strictly consume all remaining chunks of data from the stream.

Since 0.1.0

Advanced connection creation

makeConnection Source #

Arguments

:: IO ByteString

read

-> (ByteString -> IO ())

write

-> IO ()

close

-> IO Connection 

Create a new Connection from a read, write, and close function.

Since: 0.5.3

socketConnection Source #

Arguments

:: Socket 
-> Int

chunk size

-> IO Connection 

Create a new Connection from a Socket.

Since: 0.5.3

Misc

data HttpException Source #

An exception which may be generated by this library

Since: 0.5.0

Constructors

HttpExceptionRequest Request HttpExceptionContent

Most exceptions are specific to a Request. Inspect the HttpExceptionContent value for details on what occurred.

Since: 0.5.0

InvalidUrlException String String

A URL (first field) is invalid for a given reason (second argument).

Since: 0.5.0

data HttpExceptionContent Source #

Constructors

StatusCodeException (Response ()) ByteString

Generated by the parseUrlThrow function when the server returns a non-2XX response status code.

May include the beginning of the response body.

Since: 0.5.0

TooManyRedirects [Response ByteString]

The server responded with too many redirects for a request.

Contains the list of encountered responses containing redirects in reverse chronological order; including last redirect, which triggered the exception and was not followed.

Since: 0.5.0

OverlongHeaders

Either too many headers, or too many total bytes in a single header, were returned by the server, and the memory exhaustion protection in this library has kicked in.

Since: 0.5.0

ResponseTimeout

The server took too long to return a response. This can be altered via responseTimeout or managerResponseTimeout.

Since: 0.5.0

ConnectionTimeout

Attempting to connect to the server timed out.

Since: 0.5.0

ConnectionFailure SomeException

An exception occurred when trying to connect to the server.

Since: 0.5.0

InvalidStatusLine ByteString

The status line returned by the server could not be parsed.

Since: 0.5.0

InvalidHeader ByteString

The given response header line could not be parsed

Since: 0.5.0

InvalidRequestHeader ByteString

The given request header is not compliant (e.g. has newlines)

Since: 0.5.14

InternalException SomeException

An exception was raised by an underlying library when performing the request. Most often, this is caused by a failing socket action or a TLS exception.

Since: 0.5.0

ProxyConnectException ByteString Int Status

A non-200 status code was returned when trying to connect to the proxy server on the given host and port.

Since: 0.5.0

NoResponseDataReceived

No response data was received from the server at all. This exception may deserve special handling within the library, since it may indicate that a pipelining has been used, and a connection thought to be open was in fact closed.

Since: 0.5.0

TlsNotSupported

Exception thrown when using a Manager which does not have support for secure connections. Typically, you will want to use tlsManagerSettings from http-client-tls to overcome this.

Since: 0.5.0

WrongRequestBodyStreamSize Word64 Word64

The request body provided did not match the expected size.

Provides the expected and actual size.

Since: 0.4.31

ResponseBodyTooShort Word64 Word64

The returned response body is too short. Provides the expected size and actual size.

Since: 0.5.0

InvalidChunkHeaders

A chunked response body had invalid headers.

Since: 0.5.0

IncompleteHeaders

An incomplete set of response headers were returned.

Since: 0.5.0

InvalidDestinationHost ByteString

The host we tried to connect to is invalid (e.g., an empty string).

HttpZlibException ZlibException

An exception was thrown when inflating a response body.

Since: 0.5.0

InvalidProxyEnvironmentVariable Text Text

Values in the proxy environment variable were invalid. Provides the environment variable name and its value.

Since: 0.5.0

ConnectionClosed

Attempted to use a Connection which was already closed

Since: 0.5.0

InvalidProxySettings Text

Proxy settings are not valid (Windows specific currently) @since 0.5.7

data Proxy Source #

Define a HTTP proxy, consisting of a hostname and port number.

Constructors

Proxy 

Fields

Instances
Eq Proxy Source # 
Instance details

Defined in Network.HTTP.Client.Types

Methods

(==) :: Proxy -> Proxy -> Bool #

(/=) :: Proxy -> Proxy -> Bool #

Ord Proxy Source # 
Instance details

Defined in Network.HTTP.Client.Types

Methods

compare :: Proxy -> Proxy -> Ordering #

(<) :: Proxy -> Proxy -> Bool #

(<=) :: Proxy -> Proxy -> Bool #

(>) :: Proxy -> Proxy -> Bool #

(>=) :: Proxy -> Proxy -> Bool #

max :: Proxy -> Proxy -> Proxy #

min :: Proxy -> Proxy -> Proxy #

Read Proxy Source # 
Instance details

Defined in Network.HTTP.Client.Types

Show Proxy Source # 
Instance details

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> Proxy -> ShowS #

show :: Proxy -> String #

showList :: [Proxy] -> ShowS #

withConnection :: Request -> Manager -> (Connection -> IO a) -> IO a Source #

Perform an action using a Connection acquired from the given Manager.

You should use this only when you have to read and write interactively through the connection (e.g. connection by the WebSocket protocol).

Since: 0.5.13

Cookies

updateCookieJar Source #

Arguments

:: Response a

Response received from server

-> Request

Request which generated the response

-> UTCTime

Value that should be used as "now"

-> CookieJar

Current cookie jar

-> (CookieJar, Response a)

(Updated cookie jar with cookies from the Response, The response stripped of any "Set-Cookie" header)

This applies receiveSetCookie to a given Response

receiveSetCookie Source #

Arguments

:: SetCookie

The SetCookie the cookie jar is receiving

-> Request

The request that originated the response that yielded the SetCookie

-> UTCTime

Value that should be used as "now"

-> Bool

Whether or not this request is coming from an "http" source (not javascript or anything like that)

-> CookieJar

Input cookie jar to modify

-> CookieJar

Updated cookie jar

This corresponds to the algorithm described in Section 5.3 "Storage Model" This function consists of calling generateCookie followed by insertCheckedCookie. Use this function if you plan to do both in a row. generateCookie and insertCheckedCookie are only provided for more fine-grained control.

generateCookie Source #

Arguments

:: SetCookie

The SetCookie we are encountering

-> Request

The request that originated the response that yielded the SetCookie

-> UTCTime

Value that should be used as "now"

-> Bool

Whether or not this request is coming from an "http" source (not javascript or anything like that)

-> Maybe Cookie

The optional output cookie

Turn a SetCookie into a Cookie, if it is valid

insertCheckedCookie Source #

Arguments

:: Cookie

The SetCookie the cookie jar is receiving

-> CookieJar

Input cookie jar to modify

-> Bool

Whether or not this request is coming from an "http" source (not javascript or anything like that)

-> CookieJar

Updated (or not) cookie jar

Insert a cookie created by generateCookie into the cookie jar (or not if it shouldn't be allowed in)

insertCookiesIntoRequest Source #

Arguments

:: Request

The request to insert into

-> CookieJar

Current cookie jar

-> UTCTime

Value that should be used as "now"

-> (Request, CookieJar)

(Output request, Updated cookie jar (last-access-time is updated))

This applies the computeCookieString to a given Request

computeCookieString Source #

Arguments

:: Request

Input request

-> CookieJar

Current cookie jar

-> UTCTime

Value that should be used as "now"

-> Bool

Whether or not this request is coming from an "http" source (not javascript or anything like that)

-> (ByteString, CookieJar)

(Contents of a "Cookie" header, Updated cookie jar (last-access-time is updated))

This corresponds to the algorithm described in Section 5.4 "The Cookie Header"

evictExpiredCookies Source #

Arguments

:: CookieJar

Input cookie jar

-> UTCTime

Value that should be used as "now"

-> CookieJar

Filtered cookie jar

This corresponds to the eviction algorithm described in Section 5.3 "Storage Model"

pathMatches :: ByteString -> ByteString -> Bool Source #

This corresponds to the subcomponent algorithm entitled "Path-Match" detailed in section 5.1.4

domainMatches Source #

Arguments

:: ByteString

Domain to test

-> ByteString

Domain from a cookie

-> Bool 

This corresponds to the subcomponent algorithm entitled "Domain Matching" detailed in section 5.1.3

defaultPath :: Request -> ByteString Source #

This corresponds to the subcomponent algorithm entitled "Paths" detailed in section 5.1.4