Network.HTTP.Client.Internal

Note that this is essentially the "kitchen sink" export module, including many functions intended only to be used internally by this package. No API stability is guaranteed for this module. If you see functions here which you believe should be promoted to a stable API, please contact the author.

Low-level response body handling

makeChunkedReader

Arguments

:: Maybe MaxHeaderLength

-> IO ()

cleanup

-> Bool

raw

-> Connection

-> IO BodyReader

makeLengthReader

Arguments

:: IO ()

cleanup

-> Int

-> Connection

-> IO BodyReader

makeGzipReader :: BodyReader -> IO BodyReader

makeUnlimitedReader

Arguments

:: IO ()

cleanup

-> Connection

-> IO BodyReader

brConsume :: BodyReader -> IO [ByteString]

Strictly consume all remaining chunks of data from the stream.

Since 0.1.0

brEmpty :: BodyReader

constBodyReader :: [ByteString] -> IO BodyReader

brReadSome :: BodyReader -> Int -> IO ByteString

Continuously call brRead, building up a lazy ByteString until a chunk is constructed that is at least as many bytes as requested.

Since 0.4.20

brRead :: BodyReader -> IO ByteString

Get a single chunk of data from the response body, or an empty bytestring if no more data is available.

Note that in order to consume the entire request body, you will need to repeatedly call this function until you receive an empty ByteString as a result.

Since 0.1.0

Raw connection handling

connectionReadLine :: Maybe MaxHeaderLength -> Connection -> IO ByteString

connectionReadLineWith :: Maybe MaxHeaderLength -> Connection -> ByteString -> IO ByteString

connectionDropTillBlankLine :: Maybe MaxHeaderLength -> Connection -> IO ()

Keep dropping input until a blank line is found.

connectionUnreadLine :: Connection -> ByteString -> IO ()

dummyConnection

Arguments

:: [ByteString]

input

-> IO (Connection, IO [ByteString], IO [ByteString])

conn, output, input

For testing

openSocketConnection

Arguments

:: (Socket -> IO ())

-> Maybe HostAddress

-> String

host

-> Int

port

-> IO Connection

openSocketConnectionSize

Arguments

:: (Socket -> IO ())

-> Int

chunk size

-> Maybe HostAddress

-> String

host

-> Int

port

-> IO Connection

makeConnection

Arguments

:: IO ByteString

read

-> (ByteString -> IO ())

write

-> IO ()

close

-> IO Connection

Create a new Connection from a read, write, and close function.

Since: 0.5.3

socketConnection

Arguments

:: Socket

-> Int

chunk size

-> IO Connection

Create a new Connection from a Socket.

Since: 0.5.3

withSocket

Arguments

:: (Socket -> IO ())

-> Maybe HostAddress

-> String

host

-> Int

port

-> (Socket -> IO a)

-> IO a

strippedHostName :: String -> String

strippedHostName takes a URI host name, as extracted by regName, and strips square brackets around IPv6 addresses.

The result is suitable for passing to services such as name resolution (getAddr).

@since

Cookies

updateCookieJar

Arguments

:: Response a

Response received from server

-> Request

Request which generated the response

-> UTCTime

Value that should be used as "now"

-> CookieJar

Current cookie jar

-> (CookieJar, Response a)

(Updated cookie jar with cookies from the Response, The response stripped of any "Set-Cookie" header)

This applies receiveSetCookie to a given Response

receiveSetCookie

Arguments

:: SetCookie

The SetCookie the cookie jar is receiving

-> Request

The request that originated the response that yielded the SetCookie

-> UTCTime

Value that should be used as "now"

-> Bool

Whether or not this request is coming from an "http" source (not javascript or anything like that)

-> CookieJar

Input cookie jar to modify

-> CookieJar

Updated cookie jar

This corresponds to the algorithm described in Section 5.3 "Storage Model" This function consists of calling generateCookie followed by insertCheckedCookie. Use this function if you plan to do both in a row. generateCookie and insertCheckedCookie are only provided for more fine-grained control.

generateCookie

Arguments

:: SetCookie

The SetCookie we are encountering

-> Request

The request that originated the response that yielded the SetCookie

-> UTCTime

Value that should be used as "now"

-> Bool

Whether or not this request is coming from an "http" source (not javascript or anything like that)

-> Maybe Cookie

The optional output cookie

Turn a SetCookie into a Cookie, if it is valid

insertCheckedCookie

Arguments

:: Cookie

The SetCookie the cookie jar is receiving

-> CookieJar

Input cookie jar to modify

-> Bool

Whether or not this request is coming from an "http" source (not javascript or anything like that)

-> CookieJar

Updated (or not) cookie jar

Insert a cookie created by generateCookie into the cookie jar (or not if it shouldn't be allowed in)

insertCookiesIntoRequest

Arguments

:: Request

The request to insert into

-> CookieJar

Current cookie jar

-> UTCTime

Value that should be used as "now"

-> (Request, CookieJar)

(Output request, Updated cookie jar (last-access-time is updated))

This applies the computeCookieString to a given Request

computeCookieString

Arguments

:: Request

Input request

-> CookieJar

Current cookie jar

-> UTCTime

Value that should be used as "now"

-> Bool

Whether or not this request is coming from an "http" source (not javascript or anything like that)

-> (ByteString, CookieJar)

(Contents of a "Cookie" header, Updated cookie jar (last-access-time is updated))

This corresponds to the algorithm described in Section 5.4 "The Cookie Header"

evictExpiredCookies

Arguments

:: CookieJar

Input cookie jar

-> UTCTime

Value that should be used as "now"

-> CookieJar

Filtered cookie jar

This corresponds to the eviction algorithm described in Section 5.3 "Storage Model"

createCookieJar :: [Cookie] -> CookieJar

destroyCookieJar :: CookieJar -> [Cookie]

pathMatches :: ByteString -> ByteString -> Bool

This corresponds to the subcomponent algorithm entitled "Path-Match" detailed in section 5.1.4

removeExistingCookieFromCookieJar :: Cookie -> CookieJar -> (Maybe Cookie, CookieJar)

domainMatches

Arguments

:: ByteString

Domain to test

-> ByteString

Domain from a cookie

-> Bool

This corresponds to the subcomponent algorithm entitled "Domain Matching" detailed in section 5.1.3

isIpAddress :: ByteString -> Bool

isPotentiallyTrustworthyOrigin

Arguments

:: Bool

True if HTTPS

-> ByteString

Host

-> Bool

Whether or not the origin is potentially trustworthy

Algorithm described in "Secure Contexts", Section 3.1, "Is origin potentially trustworthy?"

Note per RFC6265 section 5.4 user agent is free to define the meaning of "secure" protocol.

See: https://w3c.github.io/webappsec-secure-contexts/#is-origin-trustworthy

defaultPath :: Request -> ByteString

This corresponds to the subcomponent algorithm entitled "Paths" detailed in section 5.1.4

Performing requests

withResponse :: Request -> Manager -> (Response BodyReader -> IO a) -> IO a

Perform a Request using a connection acquired from the given Manager, and then provide the Response to the given function. This function is fully exception safe, guaranteeing that the response will be closed when the inner function exits. It is defined as:

withResponse req man f = bracket (responseOpen req man) responseClose f

It is recommended that you use this function in place of explicit calls to responseOpen and responseClose.

You will need to use functions such as brRead to consume the response body.

Since 0.1.0

httpLbs :: Request -> Manager -> IO (Response ByteString)

A convenience wrapper around withResponse which reads in the entire response body and immediately closes the connection. Note that this function performs fully strict I/O, and only uses a lazy ByteString in its response for memory efficiency. If you are anticipating a large response body, you are encouraged to use withResponse and brRead instead.

Since 0.1.0

httpNoBody :: Request -> Manager -> IO (Response ())

A convenient wrapper around withResponse which ignores the response body. This is useful, for example, when performing a HEAD request.

Since 0.3.2

httpRaw :: Request -> Manager -> IO (Response BodyReader)

Get a Response without any redirect following.

httpRaw' :: Request -> Manager -> IO (Request, Response BodyReader)

Get a Response without any redirect following.

This extended version of httpRaw also returns the potentially modified Request.

getModifiedRequestManager :: Manager -> Request -> IO (Manager, Request)

The used Manager can be overridden (by requestManagerOverride) and the used Request can be modified (through managerModifyRequest). This function allows to retrieve the possibly overridden Manager and the possibly modified Request.

(In case the Manager is overridden by requestManagerOverride, the Request is being modified by managerModifyRequest of the new Manager, not the old one.)

responseOpen :: Request -> Manager -> IO (Response BodyReader)

The most low-level function for initiating an HTTP request.

The first argument to this function gives a full specification on the request: the host to connect to, whether to use SSL, headers, etc. Please see Request for full details. The second argument specifies which Manager should be used.

This function then returns a Response with a BodyReader. The Response contains the status code and headers that were sent back to us, and the BodyReader contains the body of the request. Note that this BodyReader allows you to have fully interleaved IO actions during your HTTP download, making it possible to download very large responses in constant memory.

An important note: the response body returned by this function represents a live HTTP connection. As such, if you do not use the response body, an open socket will be retained indefinitely. You must be certain to call responseClose on this response to free up resources.

This function automatically performs any necessary redirects, as specified by the redirectCount setting.

When implementing a (reverse) proxy using this function or relating functions, it's wise to remove Transfer-Encoding:, Content-Length:, Content-Encoding: and Accept-Encoding: from request and response headers to be relayed.

Since 0.1.0

responseClose :: Response a -> IO ()

Close any open resources associated with the given Response. In general, this will either close an active Connection or return it to the Manager to be reused.

Since 0.1.0

httpRedirect

Arguments

:: Int

redirectCount

-> (Request -> IO (Response BodyReader, Maybe Request))

function which performs a request and returns a response, and possibly another request if there's a redirect.

-> Request

-> IO (Response BodyReader)

Redirect loop.

httpRedirect'

Arguments

:: Int

redirectCount

-> (Request -> IO (Response BodyReader, Request, Bool))

function which performs a request and returns a response, the potentially modified request, and a Bool indicating if there was a redirect.

-> Request

-> IO (Request, Response BodyReader)

Redirect loop.

This extended version of httpRaw also returns the Request potentially modified by managerModifyRequest.

withConnection :: Request -> Manager -> (Connection -> IO a) -> IO a

Perform an action using a Connection acquired from the given Manager.

You should use this only when you have to read and write interactively through the connection (e.g. connection by the WebSocket protocol).

Since: 0.5.13

handleClosedRead :: SomeException -> IO ByteString

Parse response headers

parseStatusHeaders :: Maybe MaxHeaderLength -> Maybe MaxNumberHeaders -> Connection -> Maybe Int -> ([Header] -> IO ()) -> Maybe (IO ()) -> IO StatusHeaders

validateHeaders :: RequestHeaders -> HeadersValidationResult

data HeadersValidationResult

Constructors

GoodHeaders

BadHeaders ByteString

Request helper functions

parseUrl :: MonadThrow m => String -> m Request

Deprecated: Please use parseUrlThrow, parseRequest, or parseRequest_ instead

Deprecated synonym for parseUrlThrow. You probably want parseRequest or parseRequest_ instead.

Since: 0.1.0

parseUrlThrow :: MonadThrow m => String -> m Request

Same as parseRequest, except will throw an HttpException in the event of a non-2XX response. This uses throwErrorStatusCodes to implement checkResponse.

Since: 0.4.30

parseRequest :: MonadThrow m => String -> m Request

Convert a URL into a Request.

This function defaults some of the values in Request, such as setting method to GET and requestHeaders to [].

Since this function uses MonadThrow, the return monad can be anything that is an instance of MonadThrow, such as IO or Maybe.

You can place the request method at the beginning of the URL separated by a space, e.g.:

parseRequest "POST http://httpbin.org/post"

Note that the request method must be provided as all capital letters.

A Request created by this function won't cause exceptions on non-2XX response status codes.

To create a request which throws on non-2XX status codes, see parseUrlThrow

Since: 0.4.30

parseRequest_ :: String -> Request

Same as parseRequest, but parse errors cause an impure exception. Mostly useful for static strings which are known to be correctly formatted.

requestFromURI :: MonadThrow m => URI -> m Request

Convert a URI into a Request.

This can fail if the given URI is not absolute, or if the URI scheme is not "http" or "https". In these cases the function will throw an error via MonadThrow.

This function defaults some of the values in Request, such as setting method to GET and requestHeaders to [].

A Request created by this function won't cause exceptions on non-2XX response status codes.

Since: 0.5.12

requestFromURI_ :: URI -> Request

Same as requestFromURI, but if the conversion would fail, throws an impure exception.

Since: 0.5.12

defaultRequest :: Request

A default request value, a GET request of localhost/:80, with an empty request body.

Note that the default checkResponse does nothing.

Since: 0.4.30

setUriRelative :: MonadThrow m => Request -> URI -> m Request

Add a URI to the request. If it is absolute (includes a host name), add it as per setUri; if it is relative, merge it with the existing request.

getUri :: Request -> URI

Extract a URI from the request.

Since 0.1.0

setUri :: MonadThrow m => Request -> URI -> m Request

Validate a URI, then add it to the request.

setUriEither :: Request -> URI -> Either String Request

A variant of setUri that returns an error message on validation errors, instead of propagating them with throwM.

Since: 0.6.1

browserDecompress :: ByteString -> Bool

Decompress a compressed stream unless the content-type is 'application/x-tar'.

alwaysDecompress :: ByteString -> Bool

Always decompress a compressed stream.

addProxy :: ByteString -> Int -> Request -> Request

Add a proxy to the Request so that the Request when executed will use the provided proxy.

Since 0.1.0

applyBasicAuth :: ByteString -> ByteString -> Request -> Request

Add a Basic Auth header (with the specified user name and password) to the given Request. Ignore error handling:

 applyBasicAuth "user" "pass" $ parseRequest_ url

NOTE: The function applyDigestAuth is provided by the http-client-tls package instead of this package due to extra dependencies. Please use that package if you need to use digest authentication.

Since 0.1.0

applyBasicProxyAuth :: ByteString -> ByteString -> Request -> Request

Add a Proxy-Authorization header (with the specified username and password) to the given Request. Ignore error handling:

applyBasicProxyAuth "user" "pass" <$> parseRequest "http://example.org"

Since 0.3.4

applyBearerAuth :: ByteString -> Request -> Request

Add a Bearer Auth header to the given Request

Since: 0.7.6

urlEncodedBody :: [(ByteString, ByteString)] -> Request -> Request

Add url-encoded parameters to the Request.

This sets a new requestBody, adds a content-type request header and changes the method to POST.

Since 0.1.0

needsGunzip

Arguments

:: Request

-> [Header]

response headers

-> Bool

requestBuilder :: Request -> Connection -> IO (Maybe (IO ()))

setRequestIgnoreStatus :: Request -> Request

Modify the request so that non-2XX status codes do not generate a runtime StatusCodeException.

Since: 0.4.29

setRequestCheckStatus :: Request -> Request

Modify the request so that non-2XX status codes generate a runtime StatusCodeException, by using throwErrorStatusCodes

Since: 0.5.13

setQueryString :: [(ByteString, Maybe ByteString)] -> Request -> Request

Set the query string to the given key/value pairs.

Since 0.3.6

setQueryStringPartialEscape :: [(ByteString, [EscapeItem])] -> Request -> Request

Set the query string to the given key/value pairs.

Since: 0.5.10

streamFile :: FilePath -> IO RequestBody

Send a file as the request body.

It is expected that the file size does not change between calling streamFile and making any requests using this request body.

Since 0.4.9

observedStreamFile :: (StreamFileStatus -> IO ()) -> FilePath -> IO RequestBody

Send a file as the request body, while observing streaming progress via a PopObserver. Observations are made between reading and sending a chunk.

It is expected that the file size does not change between calling observedStreamFile and making any requests using this request body.

Since 0.4.9

extractBasicAuthInfo :: URI -> Maybe (ByteString, ByteString)

Extract basic access authentication info in URI. Return Nothing when there is no auth info in URI.

throwErrorStatusCodes :: MonadIO m => Request -> Response BodyReader -> m ()

Throws a StatusCodeException wrapped in HttpExceptionRequest, if the response's status code indicates an error (if it isn't 2xx). This can be used to implement checkResponse.

Since: 0.5.13

addProxySecureWithoutConnect :: Request -> Request

Send secure requests to the proxy in plain text rather than using CONNECT.

Since: 0.7.2

Low-level response body handling

getRedirectedRequest :: Request -> Request -> ResponseHeaders -> CookieJar -> Int -> Maybe Request

If a request is a redirection (status code 3xx) this function will create a new request from the old request, the server headers returned with the redirection, and the redirection code itself. This function returns Nothing if the code is not a 3xx, there is no location header included, or if the redirected response couldn't be parsed with parseRequest.

If a user of this library wants to know the url chain that results from a specific request, that user has to re-implement the redirect-following logic themselves. An example of that might look like this:

myHttp req man = do
   (res, redirectRequests) <- (`runStateT` []) $
        'httpRedirect'
            9000
            (\req' -> do
               res <- http req'{redirectCount=0} man
               modify (\rqs -> req' : rqs)
               return (res, getRedirectedRequest req req' (responseHeaders res) (responseCookieJar res) (W.statusCode (responseStatus res))
               )
            'lift'
            req
   applyCheckStatus (checkStatus req) res
   return redirectRequests

getResponse

Arguments

:: Maybe MaxHeaderLength

-> Maybe MaxNumberHeaders

-> Maybe Int

-> Request

-> Managed Connection

-> Maybe (IO ())

Action to run in case of a '100 Continue'.

-> IO (Response BodyReader)

lbsResponse :: Response BodyReader -> IO (Response ByteString)

Convert a Response that has a Source body to one with a lazy ByteString body.

getOriginalRequest :: Response a -> Request

Retrieve the orignal Request from a Response

Note that the requestBody is not available and always set to empty.

Since: 0.7.8

Manager

data ManagerSettings

Settings for a Manager. Please use the defaultManagerSettings function and then modify individual settings. For more information, see http://www.yesodweb.com/book/settings-types.

Since 0.1.0

Constructors

ManagerSettings

Fields

• managerConnCount :: Int

  Number of connections to a single host to keep alive. Default: 10.

  Since 0.1.0

• managerRawConnection :: IO (Maybe HostAddress -> String -> Int -> IO Connection)

  Create an insecure connection.

  Since 0.1.0

• managerTlsConnection :: IO (Maybe HostAddress -> String -> Int -> IO Connection)

  Create a TLS connection. Default behavior: throw an exception that TLS is not supported.

  Since 0.1.0

• managerTlsProxyConnection :: IO (ByteString -> (Connection -> IO ()) -> String -> Maybe HostAddress -> String -> Int -> IO Connection)

  Create a TLS proxy connection. Default behavior: throw an exception that TLS is not supported.

  Since 0.2.2

• managerResponseTimeout :: ResponseTimeout

  Default timeout to be applied to requests which do not provide a timeout value.

  Default is 30 seconds

  Since: 0.5.0

• managerRetryableException :: SomeException -> Bool

  Exceptions for which we should retry our request if we were reusing an already open connection. In the case of IOExceptions, for example, we assume that the connection was closed on the server and therefore open a new one.

  Since 0.1.0

• managerWrapException :: forall a. Request -> IO a -> IO a

  Action wrapped around all attempted Requests, usually used to wrap up exceptions in library-specific types.

  Default: wrap all IOExceptions in the InternalException constructor.

  Since: 0.5.0

• managerIdleConnectionCount :: Int

  Total number of idle connection to keep open at a given time.

  This limit helps deal with the case where you are making a large number of connections to different hosts. Without this limit, you could run out of file descriptors. Additionally, it can be set to zero to prevent reuse of any connections. Doing this is useful when the server your application is talking to sits behind a load balancer.

  Default: 512

  Since 0.3.7

• managerModifyRequest :: Request -> IO Request

  Perform the given modification to a Request before performing it.

  This function may be called more than once during request processing. see https://github.com/snoyberg/http-client/issues/350

  Default: no modification

  Since 0.4.4

• managerModifyResponse :: Response BodyReader -> IO (Response BodyReader)

  Perform the given modification to a Response after receiving it.

  Default: no modification

  Since: 0.5.5

• managerProxyInsecure :: ProxyOverride

  How HTTP proxy server settings should be discovered.

  Default: respect the proxy value on the Request itself.

  Since 0.4.7

• managerProxySecure :: ProxyOverride

  How HTTPS proxy server settings should be discovered.

  Default: respect the proxy value on the Request itself.

  Since 0.4.7

• managerMaxHeaderLength :: Maybe MaxHeaderLength

  Configure the maximum size, in bytes, of an HTTP header field.

  Default: 4096

  Since: 0.7.17

• managerMaxNumberHeaders :: Maybe MaxNumberHeaders

  Configure the maximum number of HTTP header fields.

  Default: 100

  Since: 0.7.18

newManager :: ManagerSettings -> IO Manager

Create a Manager. The Manager will be shut down automatically via garbage collection.

Creating a new Manager is a relatively expensive operation, you are advised to share a single Manager between requests instead.

The first argument to this function is often defaultManagerSettings, though add-on libraries may provide a recommended replacement.

Since 0.1.0

closeManager :: Manager -> IO ()

Deprecated: Manager will be closed for you automatically when no longer in use

Close all connections in a Manager.

Note that this doesn't affect currently in-flight connections, meaning you can safely use it without hurting any queries you may have concurrently running.

Since 0.1.0

withManager :: ManagerSettings -> (Manager -> IO a) -> IO a

Deprecated: Use newManager instead

Create, use and close a Manager.

Since 0.2.1

getConn :: Request -> Manager -> IO (Managed Connection)

defaultManagerSettings :: ManagerSettings

Default value for ManagerSettings.

Note that this value does not have support for SSL/TLS. If you need to make any https connections, please use the http-client-tls package, which provides a tlsManagerSettings value.

Since 0.1.0

rawConnectionModifySocket :: (Socket -> IO ()) -> IO (Maybe HostAddress -> String -> Int -> IO Connection)

A value for the managerRawConnection setting, but also allows you to modify the underlying Socket to set additional settings. For a motivating use case, see: https://github.com/snoyberg/http-client/issues/71.

Since 0.3.8

rawConnectionModifySocketSize :: (Socket -> IO ()) -> IO (Int -> Maybe HostAddress -> String -> Int -> IO Connection)

Same as rawConnectionModifySocket, but also takes in a chunk size.

Since: 0.5.2

proxyFromRequest :: ProxyOverride

Get the proxy settings from the Request itself.

Since 0.4.7

noProxy :: ProxyOverride

Never connect using a proxy, regardless of the proxy value in the Request.

Since 0.4.7

useProxy :: Proxy -> ProxyOverride

Use the given proxy settings, regardless of the proxy value in the Request.

Since 0.4.7

proxyEnvironment

Arguments

:: Maybe Proxy

fallback if no environment set

-> ProxyOverride

Get the proxy settings from the default environment variable (http_proxy for insecure, https_proxy for secure). If no variable is set, then fall back to the given value. Nothing is equivalent to noProxy, Just is equivalent to useProxy.

Since 0.4.7

proxyEnvironmentNamed

Arguments

:: Text

environment variable name

-> Maybe Proxy

fallback if no environment set

-> ProxyOverride

Same as proxyEnvironment, but instead of default environment variable names, allows you to set your own name.

Since 0.4.7

defaultProxy :: ProxyOverride

The default proxy settings for a manager. In particular: if the http_proxy (or https_proxy) environment variable is set, use it. Otherwise, use the values in the Request.

Since 0.4.7

dropProxyAuthSecure :: Request -> Request

Drop the Proxy-Authorization header from the request if we're using a secure proxy.

useProxySecureWithoutConnect :: Proxy -> ProxyOverride

Send secure requests to the proxy in plain text rather than using CONNECT, regardless of the value in the Request.

Since: 0.7.2

All types

type BodyReader = IO ByteString

An IO action that represents an incoming response body coming from the server. Data provided by this action has already been gunzipped and de-chunked, and respects any content-length headers present.

The action gets a single chunk of data from the response body, or an empty bytestring if no more data is available.

Since 0.4.0

data Connection

Constructors

Connection

Fields

• connectionRead :: IO ByteString

  If no more data, return empty.

• connectionUnread :: ByteString -> IO ()

  Return data to be read next time.

• connectionWrite :: ByteString -> IO ()

  Send data to server

• connectionClose :: IO ()

  Close connection. Any successive operation on the connection (except closing) should fail with ConnectionClosed exception. It is allowed to close connection multiple times.

data StatusHeaders

Constructors

StatusHeaders Status HttpVersion RequestHeaders RequestHeaders

Instances

Show StatusHeaders

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> StatusHeaders -> ShowS

show :: StatusHeaders -> String

showList :: [StatusHeaders] -> ShowS

Eq StatusHeaders

Defined in Network.HTTP.Client.Types

Methods

(==) :: StatusHeaders -> StatusHeaders -> Bool

(/=) :: StatusHeaders -> StatusHeaders -> Bool

Ord StatusHeaders

Defined in Network.HTTP.Client.Types

Methods

compare :: StatusHeaders -> StatusHeaders -> Ordering

(<) :: StatusHeaders -> StatusHeaders -> Bool

(<=) :: StatusHeaders -> StatusHeaders -> Bool

(>) :: StatusHeaders -> StatusHeaders -> Bool

(>=) :: StatusHeaders -> StatusHeaders -> Bool

max :: StatusHeaders -> StatusHeaders -> StatusHeaders

min :: StatusHeaders -> StatusHeaders -> StatusHeaders

data HttpException

An exception which may be generated by this library

Since: 0.5.0

Constructors

HttpExceptionRequest Request HttpExceptionContent

Most exceptions are specific to a Request. Inspect the HttpExceptionContent value for details on what occurred.

Since: 0.5.0

InvalidUrlException String String

A URL (first field) is invalid for a given reason (second argument).

Since: 0.5.0

Instances

Exception HttpException

Defined in Network.HTTP.Client.Types

Methods

toException :: HttpException -> SomeException

fromException :: SomeException -> Maybe HttpException

displayException :: HttpException -> String

Show HttpException

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> HttpException -> ShowS

show :: HttpException -> String

showList :: [HttpException] -> ShowS

data HttpExceptionContent

Constructors

StatusCodeException (Response ()) ByteString

Generated by the parseUrlThrow function when the server returns a non-2XX response status code.

May include the beginning of the response body.

Since: 0.5.0

TooManyRedirects [Response ByteString]

The server responded with too many redirects for a request.

Contains the list of encountered responses containing redirects in reverse chronological order; including last redirect, which triggered the exception and was not followed.

Since: 0.5.0

OverlongHeaders

Too many total bytes in the HTTP header were returned by the server.

Since: 0.5.0

TooManyHeaderFields

Too many HTTP header fields were returned by the server.

Since: 0.7.18

ResponseTimeout

The server took too long to return a response. This can be altered via responseTimeout or managerResponseTimeout.

Since: 0.5.0

ConnectionTimeout

Attempting to connect to the server timed out.

Since: 0.5.0

ConnectionFailure SomeException

An exception occurred when trying to connect to the server.

Since: 0.5.0

InvalidStatusLine ByteString

The status line returned by the server could not be parsed.

Since: 0.5.0

InvalidHeader ByteString

The given response header line could not be parsed

Since: 0.5.0

InvalidRequestHeader ByteString

The given request header is not compliant (e.g. has newlines)

Since: 0.5.14

InternalException SomeException

An exception was raised by an underlying library when performing the request. Most often, this is caused by a failing socket action or a TLS exception.

Since: 0.5.0

ProxyConnectException ByteString Int Status

A non-200 status code was returned when trying to connect to the proxy server on the given host and port.

Since: 0.5.0

NoResponseDataReceived

No response data was received from the server at all. This exception may deserve special handling within the library, since it may indicate that a pipelining has been used, and a connection thought to be open was in fact closed.

Since: 0.5.0

TlsNotSupported

Exception thrown when using a Manager which does not have support for secure connections. Typically, you will want to use tlsManagerSettings from http-client-tls to overcome this.

Since: 0.5.0

WrongRequestBodyStreamSize Word64 Word64

The request body provided did not match the expected size.

Provides the expected and actual size.

Since: 0.4.31

ResponseBodyTooShort Word64 Word64

The returned response body is too short. Provides the expected size and actual size.

Since: 0.5.0

InvalidChunkHeaders

A chunked response body had invalid headers.

Since: 0.5.0

IncompleteHeaders

An incomplete set of response headers were returned.

Since: 0.5.0

InvalidDestinationHost ByteString

The host we tried to connect to is invalid (e.g., an empty string).

HttpZlibException ZlibException

An exception was thrown when inflating a response body.

Since: 0.5.0

InvalidProxyEnvironmentVariable Text Text

Values in the proxy environment variable were invalid. Provides the environment variable name and its value.

Since: 0.5.0

ConnectionClosed

Attempted to use a Connection which was already closed

Since: 0.5.0

InvalidProxySettings Text

Proxy settings are not valid (Windows specific currently) @since 0.5.7

Instances

Show HttpExceptionContent

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> HttpExceptionContent -> ShowS

show :: HttpExceptionContent -> String

showList :: [HttpExceptionContent] -> ShowS

unHttpExceptionContentWrapper :: HttpExceptionContentWrapper -> HttpExceptionContent

throwHttp :: HttpExceptionContent -> IO a

toHttpException :: Request -> HttpExceptionContentWrapper -> HttpException

data Cookie

Constructors

Cookie

Fields

• cookie_name :: ByteString
• cookie_value :: ByteString
• cookie_expiry_time :: UTCTime
• cookie_domain :: ByteString
• cookie_path :: ByteString
• cookie_creation_time :: UTCTime
• cookie_last_access_time :: UTCTime
• cookie_persistent :: Bool
• cookie_host_only :: Bool
• cookie_secure_only :: Bool
• cookie_http_only :: Bool

Instances

Read Cookie

Defined in Network.HTTP.Client.Types

Methods

readsPrec :: Int -> ReadS Cookie

readList :: ReadS [Cookie]

readPrec :: ReadPrec Cookie

readListPrec :: ReadPrec [Cookie]

Show Cookie

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> Cookie -> ShowS

show :: Cookie -> String

showList :: [Cookie] -> ShowS

equalCookie :: Cookie -> Cookie -> Bool

Instead of (==).

Since there was some confusion in the history of this library about how the Eq instance should work, it was removed for clarity, and replaced by equal and equiv. equal gives you equality of all fields of the Cookie record.

Since: 0.7.0

equivCookie :: Cookie -> Cookie -> Bool

Equality of name, domain, path only. This corresponds to step 11 of the algorithm described in Section 5.3 "Storage Model". See also: equal.

Since: 0.7.0

compareCookies :: Cookie -> Cookie -> Ordering

Instead of instance Ord Cookie. See equalCookie, equivCookie.

Since: 0.7.0

newtype CookieJar

Constructors

CJ

Fields

• expose :: [Cookie]

Instances

Monoid CookieJar

Since 1.9

Defined in Network.HTTP.Client.Types

Methods

mempty :: CookieJar

mappend :: CookieJar -> CookieJar -> CookieJar

mconcat :: [CookieJar] -> CookieJar

Semigroup CookieJar

Defined in Network.HTTP.Client.Types

Methods

(<>) :: CookieJar -> CookieJar -> CookieJar

sconcat :: NonEmpty CookieJar -> CookieJar

stimes :: Integral b => b -> CookieJar -> CookieJar

Read CookieJar

Defined in Network.HTTP.Client.Types

Methods

readsPrec :: Int -> ReadS CookieJar

readList :: ReadS [CookieJar]

readPrec :: ReadPrec CookieJar

readListPrec :: ReadPrec [CookieJar]

Show CookieJar

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> CookieJar -> ShowS

show :: CookieJar -> String

showList :: [CookieJar] -> ShowS

equalCookieJar :: CookieJar -> CookieJar -> Bool

See equalCookie.

Since: 0.7.0

equivCookieJar :: CookieJar -> CookieJar -> Bool

See equalCookieJar, equalCookie.

Since: 0.7.0

data Proxy

Define a HTTP proxy, consisting of a hostname and port number.

Constructors

Proxy

Fields

• proxyHost :: ByteString

  The host name of the HTTP proxy in URI format. IPv6 addresses in square brackets.

• proxyPort :: Int

  The port number of the HTTP proxy.

Instances

Read Proxy

Defined in Network.HTTP.Client.Types

Methods

readsPrec :: Int -> ReadS Proxy

readList :: ReadS [Proxy]

readPrec :: ReadPrec Proxy

readListPrec :: ReadPrec [Proxy]

Show Proxy

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> Proxy -> ShowS

show :: Proxy -> String

showList :: [Proxy] -> ShowS

Eq Proxy

Defined in Network.HTTP.Client.Types

Methods

(==) :: Proxy -> Proxy -> Bool

(/=) :: Proxy -> Proxy -> Bool

Ord Proxy

Defined in Network.HTTP.Client.Types

Methods

compare :: Proxy -> Proxy -> Ordering

(<) :: Proxy -> Proxy -> Bool

(<=) :: Proxy -> Proxy -> Bool

(>) :: Proxy -> Proxy -> Bool

(>=) :: Proxy -> Proxy -> Bool

max :: Proxy -> Proxy -> Proxy

min :: Proxy -> Proxy -> Proxy

data RequestBody

When using one of the RequestBodyStream / RequestBodyStreamChunked constructors, you must ensure that the GivesPopper can be called multiple times. Usually this is not a problem.

The RequestBodyStreamChunked will send a chunked request body. Note that not all servers support this. Only use RequestBodyStreamChunked if you know the server you're sending to supports chunked request bodies.

Since 0.1.0

Constructors

RequestBodyLBS ByteString

RequestBodyBS ByteString

RequestBodyBuilder Int64 Builder

RequestBodyStream Int64 (GivesPopper ())

RequestBodyStreamChunked (GivesPopper ())

RequestBodyIO (IO RequestBody)

Allows creation of a RequestBody inside the IO monad, which is useful for making easier APIs (like setRequestBodyFile).

Since: 0.4.28

Instances

IsString RequestBody

Since 0.4.12

Defined in Network.HTTP.Client.Types

Methods

fromString :: String -> RequestBody

Monoid RequestBody

Defined in Network.HTTP.Client.Types

Methods

mempty :: RequestBody

mappend :: RequestBody -> RequestBody -> RequestBody

mconcat :: [RequestBody] -> RequestBody

Semigroup RequestBody

Defined in Network.HTTP.Client.Types

Methods

(<>) :: RequestBody -> RequestBody -> RequestBody

sconcat :: NonEmpty RequestBody -> RequestBody

stimes :: Integral b => b -> RequestBody -> RequestBody

type Popper = IO ByteString

A function which generates successive chunks of a request body, provider a single empty bytestring when no more data is available.

Since 0.1.0

type NeedsPopper a = Popper -> IO a

A function which must be provided with a Popper.

Since 0.1.0

type GivesPopper a = NeedsPopper a -> IO a

A function which will provide a Popper to a NeedsPopper. This seemingly convoluted structure allows for creation of request bodies which allocate scarce resources in an exception safe manner.

Since 0.1.0

data Request

All information on how to connect to a host and what should be sent in the HTTP request.

If you simply wish to download from a URL, see parseRequest.

The constructor for this data type is not exposed. Instead, you should use either the defaultRequest value, or parseRequest to construct from a URL, and then use the records below to make modifications. This approach allows http-client to add configuration options without breaking backwards compatibility.

For example, to construct a POST request, you could do something like:

initReq <- parseRequest "http://www.example.com/path"
let req = initReq
            { method = "POST"
            }

For more information, please see http://www.yesodweb.com/book/settings-types.

Since 0.1.0

Constructors

Request

Fields

• method :: Method

  HTTP request method, eg GET, POST.

  Since 0.1.0

• secure :: Bool

  Whether to use HTTPS (ie, SSL).

  Since 0.1.0

• host :: ByteString

  Requested host name, used for both the IP address to connect to and the host request header.

  This is in URI format, with raw IPv6 addresses enclosed in square brackets. Use strippedHostName when making network connections.

  Since 0.1.0

• port :: Int

  The port to connect to. Also used for generating the host request header.

  Since 0.1.0

• path :: ByteString

  Everything from the host to the query string.

  Since 0.1.0

• queryString :: ByteString

  Query string appended to the path.

  Since 0.1.0

• requestHeaders :: RequestHeaders

  Custom HTTP request headers

  The Content-Length and Transfer-Encoding headers are set automatically by this module, and shall not be added to requestHeaders.

  If not provided by the user, Host will automatically be set based on the host and port fields.

  Moreover, the Accept-Encoding header is set implicitly to gzip for convenience by default. This behaviour can be overridden if needed, by setting the header explicitly to a different value. In order to omit the Accept-Header altogether, set it to the empty string "". If you need an empty Accept-Header (i.e. requesting the identity encoding), set it to a non-empty white-space string, e.g. " ". See RFC 2616 section 14.3 for details about the semantics of the Accept-Header field. If you request a content-encoding not supported by this module, you will have to decode it yourself (see also the decompress field).

  Note: Multiple header fields with the same field-name will result in multiple header fields being sent and therefore it's the responsibility of the client code to ensure that the rules from RFC 2616 section 4.2 are honoured.

  Since 0.1.0

• requestBody :: RequestBody

  Request body to be sent to the server.

  Since 0.1.0

• proxy :: Maybe Proxy

  Optional HTTP proxy.

  Since 0.1.0

• hostAddress :: Maybe HostAddress

  Optional resolved host address. May not be used by all backends.

  Since 0.1.0

• rawBody :: Bool

  If True, a chunked and/or gzipped body will not be decoded. Use with caution.

  Since 0.1.0

• decompress :: ByteString -> Bool

  Predicate to specify whether gzipped data should be decompressed on the fly (see alwaysDecompress and browserDecompress). Argument is the mime type. Default: browserDecompress.

  Since 0.1.0

• redirectCount :: Int

  How many redirects to follow when getting a resource. 0 means follow no redirects. Default value: 10.

  Since 0.1.0

• checkResponse :: Request -> Response BodyReader -> IO ()

  Check the response immediately after receiving the status and headers. This can be useful for throwing exceptions on non-success status codes.

  In previous versions of http-client, this went under the name checkStatus, but was renamed to avoid confusion about the new default behavior (doing nothing).

  Since: 0.5.0

• responseTimeout :: ResponseTimeout

  Number of microseconds to wait for a response (see HttpExceptionContent for more information). Default: use managerResponseTimeout (which by default is 30 seconds).

  Since 0.1.0

• cookieJar :: Maybe CookieJar

  A user-defined cookie jar. If Nothing, no cookie handling will take place, "Cookie" headers in requestHeaders will be sent raw, and responseCookieJar will be empty.

  Since 0.1.0

• requestVersion :: HttpVersion

  HTTP version to send to server.

  Default: HTTP 1.1

  Since 0.4.3

• onRequestBodyException :: SomeException -> IO ()

  How to deal with exceptions thrown while sending the request.

  Default: ignore IOExceptions, rethrow all other exceptions.

  Since: 0.4.6

• requestManagerOverride :: Maybe Manager

  A Manager value that should override whatever Manager value was passed in to the HTTP request function manually. This is useful when dealing with implicit global managers, such as in Network.HTTP.Simple

  Since: 0.4.28

• shouldStripHeaderOnRedirect :: HeaderName -> Bool

  Decide whether a header must be stripped from the request when following a redirect. Default: keep all headers intact.

  Since: 0.6.2

• shouldStripHeaderOnRedirectIfOnDifferentHostOnly :: Bool

  Decide whether a header must be stripped from the request when following a redirect, if host differs from previous request in redirect chain. Default: false (always strip regardless of host change)

  Since: 0.7.15

• proxySecureMode :: ProxySecureMode

  How to proxy an HTTPS request.

  Default: Use HTTP CONNECT.

  Since: 0.7.2

• redactHeaders :: Set HeaderName

  List of header values being redacted in case we show Request.

  Since: 0.7.13

• earlyHintHeadersReceived :: [Header] -> IO ()

  Called every time an HTTP 103 Early Hints header section is received from the server.

  Since: 0.7.16

Instances

IsString Request

Parses a URL via parseRequest_

NOTE: Prior to version 0.5.0, this instance used parseUrlThrow instead.

Defined in Network.HTTP.Client.Request

Methods

fromString :: String -> Request

Show Request

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> Request -> ShowS

show :: Request -> String

showList :: [Request] -> ShowS

data Response body

A simple representation of the HTTP response.

Since 0.1.0

Constructors

Response

Fields

• responseStatus :: Status

  Status code of the response.

  Since 0.1.0

• responseVersion :: HttpVersion

  HTTP version used by the server.

  Since 0.1.0

• responseHeaders :: ResponseHeaders

  Response headers sent by the server.

  Since 0.1.0

• responseBody :: body

  Response body sent by the server.

  Since 0.1.0

• responseCookieJar :: CookieJar

  Cookies set on the client after interacting with the server. If cookies have been disabled by setting cookieJar to Nothing, then this will always be empty.

  Since 0.1.0

• responseClose' :: ResponseClose

  Releases any resource held by this response. If the response body has not been fully read yet, doing so after this call will likely be impossible.

  Since 0.1.0

• responseOriginalRequest :: Request

  Holds original Request related to this Response (with an empty body). This field is intentionally not exported directly, but made available via getOriginalRequest instead.

  Since 0.7.8

• responseEarlyHints :: ResponseHeaders

  Early response headers sent by the server, as part of an HTTP 103 Early Hints section.

  Since 0.7.16

Instances

Foldable Response

Defined in Network.HTTP.Client.Types

Methods

fold :: Monoid m => Response m -> m

foldMap :: Monoid m => (a -> m) -> Response a -> m

foldMap' :: Monoid m => (a -> m) -> Response a -> m

foldr :: (a -> b -> b) -> b -> Response a -> b

foldr' :: (a -> b -> b) -> b -> Response a -> b

foldl :: (b -> a -> b) -> b -> Response a -> b

foldl' :: (b -> a -> b) -> b -> Response a -> b

foldr1 :: (a -> a -> a) -> Response a -> a

foldl1 :: (a -> a -> a) -> Response a -> a

toList :: Response a -> [a]

null :: Response a -> Bool

length :: Response a -> Int

elem :: Eq a => a -> Response a -> Bool

maximum :: Ord a => Response a -> a

minimum :: Ord a => Response a -> a

sum :: Num a => Response a -> a

product :: Num a => Response a -> a

Traversable Response

Defined in Network.HTTP.Client.Types

Methods

traverse :: Applicative f => (a -> f b) -> Response a -> f (Response b)

sequenceA :: Applicative f => Response (f a) -> f (Response a)

mapM :: Monad m => (a -> m b) -> Response a -> m (Response b)

sequence :: Monad m => Response (m a) -> m (Response a)

Functor Response

Defined in Network.HTTP.Client.Types

Methods

fmap :: (a -> b) -> Response a -> Response b

(<$) :: a -> Response b -> Response a

Show body => Show (Response body)

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> Response body -> ShowS

show :: Response body -> String

showList :: [Response body] -> ShowS

newtype ResponseClose

Constructors

ResponseClose

Fields

• runResponseClose :: IO ()

Instances

Show ResponseClose

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> ResponseClose -> ShowS

show :: ResponseClose -> String

showList :: [ResponseClose] -> ShowS

data Manager

Keeps track of open connections for keep-alive.

If possible, you should share a single Manager between multiple threads and requests.

Since 0.1.0

Constructors

Manager

Fields

• mConns :: KeyedPool ConnKey Connection
• mResponseTimeout :: ResponseTimeout

  Copied from managerResponseTimeout

• mRetryableException :: SomeException -> Bool
• mWrapException :: forall a. Request -> IO a -> IO a
• mModifyRequest :: Request -> IO Request
• mSetProxy :: Request -> Request
• mModifyResponse :: Response BodyReader -> IO (Response BodyReader)

  See managerProxy

• mMaxHeaderLength :: Maybe MaxHeaderLength
• mMaxNumberHeaders :: Maybe MaxNumberHeaders

Instances

HasHttpManager Manager

Defined in Network.HTTP.Client.Types

Methods

getHttpManager :: Manager -> Manager

class HasHttpManager a where

Methods

getHttpManager :: a -> Manager

Instances

HasHttpManager Manager

Defined in Network.HTTP.Client.Types

Methods

getHttpManager :: Manager -> Manager

data ConnsMap

Constructors

ManagerClosed

ManagerOpen !Int !(Map ConnKey (NonEmptyList Connection))

data ManagerSettings

Settings for a Manager. Please use the defaultManagerSettings function and then modify individual settings. For more information, see http://www.yesodweb.com/book/settings-types.

Since 0.1.0

Constructors

ManagerSettings

Fields

• managerConnCount :: Int

  Number of connections to a single host to keep alive. Default: 10.

  Since 0.1.0

• managerRawConnection :: IO (Maybe HostAddress -> String -> Int -> IO Connection)

  Create an insecure connection.

  Since 0.1.0

• managerTlsConnection :: IO (Maybe HostAddress -> String -> Int -> IO Connection)

  Create a TLS connection. Default behavior: throw an exception that TLS is not supported.

  Since 0.1.0

• managerTlsProxyConnection :: IO (ByteString -> (Connection -> IO ()) -> String -> Maybe HostAddress -> String -> Int -> IO Connection)

  Create a TLS proxy connection. Default behavior: throw an exception that TLS is not supported.

  Since 0.2.2

• managerResponseTimeout :: ResponseTimeout

  Default timeout to be applied to requests which do not provide a timeout value.

  Default is 30 seconds

  Since: 0.5.0

• managerRetryableException :: SomeException -> Bool

  Exceptions for which we should retry our request if we were reusing an already open connection. In the case of IOExceptions, for example, we assume that the connection was closed on the server and therefore open a new one.

  Since 0.1.0

• managerWrapException :: forall a. Request -> IO a -> IO a

  Action wrapped around all attempted Requests, usually used to wrap up exceptions in library-specific types.

  Default: wrap all IOExceptions in the InternalException constructor.

  Since: 0.5.0

• managerIdleConnectionCount :: Int

  Total number of idle connection to keep open at a given time.

  This limit helps deal with the case where you are making a large number of connections to different hosts. Without this limit, you could run out of file descriptors. Additionally, it can be set to zero to prevent reuse of any connections. Doing this is useful when the server your application is talking to sits behind a load balancer.

  Default: 512

  Since 0.3.7

• managerModifyRequest :: Request -> IO Request

  Perform the given modification to a Request before performing it.

  This function may be called more than once during request processing. see https://github.com/snoyberg/http-client/issues/350

  Default: no modification

  Since 0.4.4

• managerModifyResponse :: Response BodyReader -> IO (Response BodyReader)

  Perform the given modification to a Response after receiving it.

  Default: no modification

  Since: 0.5.5

• managerProxyInsecure :: ProxyOverride

  How HTTP proxy server settings should be discovered.

  Default: respect the proxy value on the Request itself.

  Since 0.4.7

• managerProxySecure :: ProxyOverride

  How HTTPS proxy server settings should be discovered.

  Default: respect the proxy value on the Request itself.

  Since 0.4.7

• managerMaxHeaderLength :: Maybe MaxHeaderLength

  Configure the maximum size, in bytes, of an HTTP header field.

  Default: 4096

  Since: 0.7.17

• managerMaxNumberHeaders :: Maybe MaxNumberHeaders

  Configure the maximum number of HTTP header fields.

  Default: 100

  Since: 0.7.18

data NonEmptyList a

Constructors

One a UTCTime

Cons a Int UTCTime (NonEmptyList a)

data ConnHost

Hostname or resolved host address.

Constructors

HostName Text

HostAddress HostAddress

Instances

Show ConnHost

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> ConnHost -> ShowS

show :: ConnHost -> String

showList :: [ConnHost] -> ShowS

Eq ConnHost

Defined in Network.HTTP.Client.Types

Methods

(==) :: ConnHost -> ConnHost -> Bool

(/=) :: ConnHost -> ConnHost -> Bool

Ord ConnHost

Defined in Network.HTTP.Client.Types

Methods

compare :: ConnHost -> ConnHost -> Ordering

(<) :: ConnHost -> ConnHost -> Bool

(<=) :: ConnHost -> ConnHost -> Bool

(>) :: ConnHost -> ConnHost -> Bool

(>=) :: ConnHost -> ConnHost -> Bool

max :: ConnHost -> ConnHost -> ConnHost

min :: ConnHost -> ConnHost -> ConnHost

data ConnKey

ConnKey consists of a hostname, a port and a Bool specifying whether to use SSL.

Constructors

CKRaw (Maybe HostAddress) !ByteString !Int

CKSecure (Maybe HostAddress) !ByteString !Int

CKProxy !ByteString !Int (Maybe ByteString) !ByteString !Int

Instances

Show ConnKey

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> ConnKey -> ShowS

show :: ConnKey -> String

showList :: [ConnKey] -> ShowS

Eq ConnKey

Defined in Network.HTTP.Client.Types

Methods

(==) :: ConnKey -> ConnKey -> Bool

(/=) :: ConnKey -> ConnKey -> Bool

Ord ConnKey

Defined in Network.HTTP.Client.Types

Methods

compare :: ConnKey -> ConnKey -> Ordering

(<) :: ConnKey -> ConnKey -> Bool

(<=) :: ConnKey -> ConnKey -> Bool

(>) :: ConnKey -> ConnKey -> Bool

(>=) :: ConnKey -> ConnKey -> Bool

max :: ConnKey -> ConnKey -> ConnKey

min :: ConnKey -> ConnKey -> ConnKey

newtype ProxyOverride

How the HTTP proxy server settings should be discovered.

Since 0.4.7

Constructors

ProxyOverride

Fields

• runProxyOverride :: Bool -> IO (Request -> Request)

data StreamFileStatus

Status of streaming a request body from a file.

Since 0.4.9

Constructors

StreamFileStatus

Fields

• fileSize :: Int64
• readSoFar :: Int64
• thisChunkSize :: Int

Instances

Show StreamFileStatus

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> StreamFileStatus -> ShowS

show :: StreamFileStatus -> String

showList :: [StreamFileStatus] -> ShowS

Eq StreamFileStatus

Defined in Network.HTTP.Client.Types

Methods

(==) :: StreamFileStatus -> StreamFileStatus -> Bool

(/=) :: StreamFileStatus -> StreamFileStatus -> Bool

Ord StreamFileStatus

Defined in Network.HTTP.Client.Types

Methods

compare :: StreamFileStatus -> StreamFileStatus -> Ordering

(<) :: StreamFileStatus -> StreamFileStatus -> Bool

(<=) :: StreamFileStatus -> StreamFileStatus -> Bool

(>) :: StreamFileStatus -> StreamFileStatus -> Bool

(>=) :: StreamFileStatus -> StreamFileStatus -> Bool

max :: StreamFileStatus -> StreamFileStatus -> StreamFileStatus

min :: StreamFileStatus -> StreamFileStatus -> StreamFileStatus

data ResponseTimeout

How to deal with timing out on retrieval of response headers.

Since: 0.5.0

Constructors

ResponseTimeoutMicro !Int

Wait the given number of microseconds for response headers to load, then throw an exception

ResponseTimeoutNone

Wait indefinitely

ResponseTimeoutDefault

Fall back to the manager setting (managerResponseTimeout) or, in its absence, Wait 30 seconds and then throw an exception.

Instances

Show ResponseTimeout

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> ResponseTimeout -> ShowS

show :: ResponseTimeout -> String

showList :: [ResponseTimeout] -> ShowS

Eq ResponseTimeout

Defined in Network.HTTP.Client.Types

Methods

(==) :: ResponseTimeout -> ResponseTimeout -> Bool

(/=) :: ResponseTimeout -> ResponseTimeout -> Bool

data ProxySecureMode

Define how to make secure connections using a proxy server.

Constructors

ProxySecureWithConnect

Use the HTTP CONNECT verb to forward a secure connection through the proxy.

ProxySecureWithoutConnect

Send the request directly to the proxy with an https URL. This mode can be used to offload TLS handling to a trusted local proxy.

Instances

Read ProxySecureMode

Defined in Network.HTTP.Client.Types

Methods

readsPrec :: Int -> ReadS ProxySecureMode

readList :: ReadS [ProxySecureMode]

readPrec :: ReadPrec ProxySecureMode

readListPrec :: ReadPrec [ProxySecureMode]

Show ProxySecureMode

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> ProxySecureMode -> ShowS

show :: ProxySecureMode -> String

showList :: [ProxySecureMode] -> ShowS

Eq ProxySecureMode

Defined in Network.HTTP.Client.Types

Methods

(==) :: ProxySecureMode -> ProxySecureMode -> Bool

(/=) :: ProxySecureMode -> ProxySecureMode -> Bool

Ord ProxySecureMode

Defined in Network.HTTP.Client.Types

Methods

compare :: ProxySecureMode -> ProxySecureMode -> Ordering

(<) :: ProxySecureMode -> ProxySecureMode -> Bool

(<=) :: ProxySecureMode -> ProxySecureMode -> Bool

(>) :: ProxySecureMode -> ProxySecureMode -> Bool

(>=) :: ProxySecureMode -> ProxySecureMode -> Bool

max :: ProxySecureMode -> ProxySecureMode -> ProxySecureMode

min :: ProxySecureMode -> ProxySecureMode -> ProxySecureMode

newtype MaxHeaderLength

The maximum header size in bytes.

Since: 0.7.14

Constructors

MaxHeaderLength

Fields

• unMaxHeaderLength :: Int

Instances

Bounded MaxHeaderLength

Defined in Network.HTTP.Client.Types

Methods

minBound :: MaxHeaderLength

maxBound :: MaxHeaderLength

Enum MaxHeaderLength

Defined in Network.HTTP.Client.Types

Methods

succ :: MaxHeaderLength -> MaxHeaderLength

pred :: MaxHeaderLength -> MaxHeaderLength

toEnum :: Int -> MaxHeaderLength

fromEnum :: MaxHeaderLength -> Int

enumFrom :: MaxHeaderLength -> [MaxHeaderLength]

enumFromThen :: MaxHeaderLength -> MaxHeaderLength -> [MaxHeaderLength]

enumFromTo :: MaxHeaderLength -> MaxHeaderLength -> [MaxHeaderLength]

enumFromThenTo :: MaxHeaderLength -> MaxHeaderLength -> MaxHeaderLength -> [MaxHeaderLength]

Num MaxHeaderLength

Defined in Network.HTTP.Client.Types

Methods

(+) :: MaxHeaderLength -> MaxHeaderLength -> MaxHeaderLength

(-) :: MaxHeaderLength -> MaxHeaderLength -> MaxHeaderLength

(*) :: MaxHeaderLength -> MaxHeaderLength -> MaxHeaderLength

negate :: MaxHeaderLength -> MaxHeaderLength

abs :: MaxHeaderLength -> MaxHeaderLength

signum :: MaxHeaderLength -> MaxHeaderLength

fromInteger :: Integer -> MaxHeaderLength

Show MaxHeaderLength

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> MaxHeaderLength -> ShowS

show :: MaxHeaderLength -> String

showList :: [MaxHeaderLength] -> ShowS

Eq MaxHeaderLength

Defined in Network.HTTP.Client.Types

Methods

(==) :: MaxHeaderLength -> MaxHeaderLength -> Bool

(/=) :: MaxHeaderLength -> MaxHeaderLength -> Bool

Ord MaxHeaderLength

Defined in Network.HTTP.Client.Types

Methods

compare :: MaxHeaderLength -> MaxHeaderLength -> Ordering

(<) :: MaxHeaderLength -> MaxHeaderLength -> Bool

(<=) :: MaxHeaderLength -> MaxHeaderLength -> Bool

(>) :: MaxHeaderLength -> MaxHeaderLength -> Bool

(>=) :: MaxHeaderLength -> MaxHeaderLength -> Bool

max :: MaxHeaderLength -> MaxHeaderLength -> MaxHeaderLength

min :: MaxHeaderLength -> MaxHeaderLength -> MaxHeaderLength

newtype MaxNumberHeaders

The maximum number of header fields.

Since: 0.7.18

Constructors

MaxNumberHeaders

Fields

• unMaxNumberHeaders :: Int

Instances

Bounded MaxNumberHeaders

Defined in Network.HTTP.Client.Types

Methods

minBound :: MaxNumberHeaders

maxBound :: MaxNumberHeaders

Enum MaxNumberHeaders

Defined in Network.HTTP.Client.Types

Methods

succ :: MaxNumberHeaders -> MaxNumberHeaders

pred :: MaxNumberHeaders -> MaxNumberHeaders

toEnum :: Int -> MaxNumberHeaders

fromEnum :: MaxNumberHeaders -> Int

enumFrom :: MaxNumberHeaders -> [MaxNumberHeaders]

enumFromThen :: MaxNumberHeaders -> MaxNumberHeaders -> [MaxNumberHeaders]

enumFromTo :: MaxNumberHeaders -> MaxNumberHeaders -> [MaxNumberHeaders]

enumFromThenTo :: MaxNumberHeaders -> MaxNumberHeaders -> MaxNumberHeaders -> [MaxNumberHeaders]

Num MaxNumberHeaders

Defined in Network.HTTP.Client.Types

Methods

(+) :: MaxNumberHeaders -> MaxNumberHeaders -> MaxNumberHeaders

(-) :: MaxNumberHeaders -> MaxNumberHeaders -> MaxNumberHeaders

(*) :: MaxNumberHeaders -> MaxNumberHeaders -> MaxNumberHeaders

negate :: MaxNumberHeaders -> MaxNumberHeaders

abs :: MaxNumberHeaders -> MaxNumberHeaders

signum :: MaxNumberHeaders -> MaxNumberHeaders

fromInteger :: Integer -> MaxNumberHeaders

Show MaxNumberHeaders

Defined in Network.HTTP.Client.Types

Methods

showsPrec :: Int -> MaxNumberHeaders -> ShowS

show :: MaxNumberHeaders -> String

showList :: [MaxNumberHeaders] -> ShowS

Eq MaxNumberHeaders

Defined in Network.HTTP.Client.Types

Methods

(==) :: MaxNumberHeaders -> MaxNumberHeaders -> Bool

(/=) :: MaxNumberHeaders -> MaxNumberHeaders -> Bool

Ord MaxNumberHeaders

Defined in Network.HTTP.Client.Types

Methods

compare :: MaxNumberHeaders -> MaxNumberHeaders -> Ordering

(<) :: MaxNumberHeaders -> MaxNumberHeaders -> Bool

(<=) :: MaxNumberHeaders -> MaxNumberHeaders -> Bool

(>) :: MaxNumberHeaders -> MaxNumberHeaders -> Bool

(>=) :: MaxNumberHeaders -> MaxNumberHeaders -> Bool

max :: MaxNumberHeaders -> MaxNumberHeaders -> MaxNumberHeaders

min :: MaxNumberHeaders -> MaxNumberHeaders -> MaxNumberHeaders

Various utilities

readPositiveInt :: String -> Maybe Int

Read a positive Int, accounting for overflow

dummyManaged :: resource -> Managed resource

For testing purposes only: create a dummy Managed wrapper