streamly-core-0.2.2: Streaming, parsers, arrays, serialization and more
Copyright(c) 2019 Composewell Technologies
LicenseBSD-3-Clause
Maintainerstreamly@composewell.com
Stabilityreleased
PortabilityGHC
Safe HaskellSafe-Inferred
LanguageHaskell2010

Streamly.Data.Fold

Description

Fast, composable stream consumers with ability to terminate, supporting stream fusion.

Using Folds

This module provides elementary folds and fold combinators that can be used to consume a stream of data and reduce it to a final value, or transform it in a stateful manner using scans. A data stream can be reduced into a stream of folded data elements by folding segments of the stream. Fold combinators can be used to compose multiple folds in parallel or to create a pipeline of folds such that the next fold consumes the result of the previous fold. To run these folds on a stream see fold, scan, postscan, scanMaybe, foldMany and other operations accepting Fold type as argument Streamly.Data.Stream.

Reducing a Stream

A Fold is a consumer of a stream of values. A fold driver (such as fold) initializes the fold accumulator, runs the fold step function in a loop, processing the input stream one element at a time and accumulating the result. The loop continues until the fold terminates, at which point the accumulated result is returned.

For example, a sum Fold represents a stream consumer that adds the values in the input stream:

>>> Stream.fold Fold.sum $ Stream.fromList [1..100]
5050

Conceptually, a Fold is a data type that mimics a strict left fold (foldl). The above example is similar to a left fold using (+) as the step and 0 as the initial value of the accumulator:

>>> Data.List.foldl' (+) 0 [1..100]
5050

Folds have an early termination capability e.g. the one fold terminates after consuming one element:

>>> Stream.fold Fold.one $ Stream.fromList [1..]
Just 1

The above example is similar to the following right fold:

>>> Prelude.foldr (\x _ -> Just x) Nothing [1..]
Just 1

Folds can be combined together using combinators. For example, to create a fold that sums first two elements in a stream:

>>> sumTwo = Fold.take 2 Fold.sum
>>> Stream.fold sumTwo $ Stream.fromList [1..100]
3

Parallel Composition

Folds can be combined to run in parallel on the same input. For example, to compute the average of numbers in a stream without going through the stream twice:

>>> avg = Fold.teeWith (/) Fold.sum (fmap fromIntegral Fold.length)
>>> Stream.fold avg $ Stream.fromList [1.0..100.0]
50.5

Folds can be combined so as to partition the input stream over multiple folds. For example, to count even and odd numbers in a stream:

>>> split n = if even n then Left n else Right n
>>> stream = fmap split $ Stream.fromList [1..100]
>>> countEven = fmap (("Even " ++) . show) Fold.length
>>> countOdd = fmap (("Odd "  ++) . show) Fold.length
>>> f = Fold.partition countEven countOdd
>>> Stream.fold f stream
("Even 50","Odd 50")

Sequential Composition

Terminating folds can be combined to parse the stream serially such that the first fold consumes the input until it terminates and the second fold consumes the rest of the input until it terminates:

>>> f = Fold.splitWith (,) (Fold.take 8 Fold.toList) (Fold.takeEndBy (== '\n') Fold.toList)
>>> Stream.fold f $ Stream.fromList "header: hello\n"
("header: ","hello\n")

Splitting a Stream

A Fold can be applied repeatedly on a stream to transform it to a stream of fold results. To split a stream on newlines:

>>> f = Fold.takeEndBy (== '\n') Fold.toList
>>> Stream.fold Fold.toList $ Stream.foldMany f $ Stream.fromList "Hello there!\nHow are you\n"
["Hello there!\n","How are you\n"]

Similarly, we can split the input of a fold too:

>>> Stream.fold (Fold.many f Fold.toList) $ Stream.fromList "Hello there!\nHow are you\n"
["Hello there!\n","How are you\n"]

Folds vs. Streams

We can often use streams or folds to achieve the same goal. However, streams are more efficient in composition of producers (e.g. append or mergeBy) whereas folds are more efficient in composition of consumers (e.g. splitWith, partition or teeWith).

Streams are producers, transformations on streams happen on the output side:

>>> :{
 f stream =
       Stream.filter odd stream
     & fmap (+1)
     & Stream.fold Fold.sum
:}
>>> f $ Stream.fromList [1..100 :: Int]
2550

Folds are stream consumers with an input stream and an output value, stream transformations on folds happen on the input side:

>>> :{
f =
       Fold.filter odd
     $ Fold.lmap (+1)
     $ Fold.sum
:}
>>> Stream.fold f $ Stream.fromList [1..100 :: Int]
2550

Notice the similiarity in the definition of f in both cases, the only difference is the composition by & vs $ and the use lmap vs map, the difference is due to output vs input side transformations.

Fusion Limitations

Folds support stream fusion for generating loops comparable to the speed of C. However, it has some limitations. For fusion to work, the folds must be inlined, folds must be statically known and not generated dynamically, folds should not be passed recursively.

Another limitation is due to the quadratic complexity causing slowdown when too many nested compositions are used. Especially, the performance of the Applicative instance and splitting operations (e.g. splitWith) degrades quadratically (O(n^2)) when combined n times, roughly 8 or less sequenced operations are fine. For these cases folds can be converted to parsers and then used as ParserK.

Experimental APIs

Please refer to Streamly.Internal.Data.Fold for more functions that have not yet been released.

Synopsis

Setup

To execute the code examples provided in this module in ghci, please run the following commands first.

>>> :m
>>> :set -XFlexibleContexts
>>> import Control.Monad (void)
>>> import qualified Data.Foldable as Foldable
>>> import Data.Function ((&))
>>> import Data.Functor.Identity (Identity, runIdentity)
>>> import Data.IORef (newIORef, readIORef, writeIORef)
>>> import Data.Maybe (fromJust, isJust)
>>> import Data.Monoid (Endo(..), Last(..), Sum(..))
>>> import Streamly.Data.Array (Array)
>>> import Streamly.Data.Fold (Fold, Tee(..))
>>> import Streamly.Data.Stream (Stream)
>>> import qualified Streamly.Data.Array as Array
>>> import qualified Streamly.Data.Fold as Fold
>>> import qualified Streamly.Data.MutArray as MutArray
>>> import qualified Streamly.Data.Parser as Parser
>>> import qualified Streamly.Data.Stream as Stream
>>> import qualified Streamly.Data.StreamK as StreamK
>>> import qualified Streamly.Data.Unfold as Unfold

For APIs that have not been released yet.

>>> import qualified Streamly.Internal.Data.Fold as Fold

Running A Fold

drive :: Monad m => Stream m a -> Fold m a b -> m b Source #

Drive a fold using the supplied Stream, reducing the resulting expression strictly at each step.

Definition:

>>> drive = flip Stream.fold

Example:

>>> Fold.drive (Stream.enumerateFromTo 1 100) Fold.sum
5050

Fold Type

data Fold m a b Source #

The type Fold m a b represents a consumer of an input stream of values of type a and returning a final value of type b in Monad m. The constructor of a fold is Fold step initial extract final.

The fold uses an internal state of type s. The initial value of the state s is created by initial. This function is called once and only once before the fold starts consuming input. Any resource allocation can be done in this function.

The step function is called on each input, it consumes an input and returns the next intermediate state (see Step) or the final result b if the fold terminates.

If the fold is used as a scan, the extract function is used by the scan driver to map the current state s of the fold to the fold result. Thus extract can be called multiple times. In some folds, where scanning does not make sense, this function is left unimplemented; such folds cannot be used as scans.

Before a fold terminates, final is called once and only once (unless the fold terminated in initial itself). Any resources allocated by initial can be released in final. In folds that do not require any cleanup extract and final are typically the same.

When implementing fold combinators, care should be taken to cleanup any state of the argument folds held by the fold by calling the respective final at all exit points of the fold. Also, final should not be called more than once. Note that if a fold terminates by Done constructor, there is no state to cleanup.

NOTE: The constructor is not yet released, smart constructors are provided to create folds.

Instances

Instances details
Monad m => Applicative (Fold m a) Source #

Applicative form of splitWith. Split the input serially over two folds. Note that this fuses but performance degrades quadratically with respect to the number of compositions. It should be good to use for less than 8 compositions.

Instance details

Defined in Streamly.Internal.Data.Fold.Type

Methods

pure :: a0 -> Fold m a a0 #

(<*>) :: Fold m a (a0 -> b) -> Fold m a a0 -> Fold m a b #

liftA2 :: (a0 -> b -> c) -> Fold m a a0 -> Fold m a b -> Fold m a c #

(*>) :: Fold m a a0 -> Fold m a b -> Fold m a b #

(<*) :: Fold m a a0 -> Fold m a b -> Fold m a a0 #

Functor m => Functor (Fold m a) Source #

Maps a function on the output of the fold (the type b).

Instance details

Defined in Streamly.Internal.Data.Fold.Type

Methods

fmap :: (a0 -> b) -> Fold m a a0 -> Fold m a b #

(<$) :: a0 -> Fold m a b -> Fold m a a0 #

newtype Tee m a b Source #

Tee is a newtype wrapper over the Fold type providing distributing Applicative, Semigroup, Monoid, Num, Floating and Fractional instances.

The input received by the composed Tee is replicated and distributed to the constituent folds of the Tee.

For example, to compute the average of numbers in a stream without going through the stream twice:

>>> avg = (/) <$> (Tee Fold.sum) <*> (Tee $ fmap fromIntegral Fold.length)
>>> Stream.fold (unTee avg) $ Stream.fromList [1.0..100.0]
50.5

Similarly, the Semigroup and Monoid instances of Tee distribute the input to both the folds and combine the outputs using Monoid or Semigroup instances of the output types:

>>> import Data.Monoid (Sum(..))
>>> t = Tee Fold.one <> Tee Fold.latest
>>> Stream.fold (unTee t) (fmap Sum $ Stream.enumerateFromTo 1.0 100.0)
Just (Sum {getSum = 101.0})

The Num, Floating, and Fractional instances work in the same way.

Constructors

Tee 

Fields

Instances

Instances details
Monad m => Applicative (Tee m a) Source #

<*> distributes the input to both the argument Tees and combines their outputs using function application.

Instance details

Defined in Streamly.Internal.Data.Fold.Tee

Methods

pure :: a0 -> Tee m a a0 #

(<*>) :: Tee m a (a0 -> b) -> Tee m a a0 -> Tee m a b #

liftA2 :: (a0 -> b -> c) -> Tee m a a0 -> Tee m a b -> Tee m a c #

(*>) :: Tee m a a0 -> Tee m a b -> Tee m a b #

(<*) :: Tee m a a0 -> Tee m a b -> Tee m a a0 #

Functor m => Functor (Tee m a) Source # 
Instance details

Defined in Streamly.Internal.Data.Fold.Tee

Methods

fmap :: (a0 -> b) -> Tee m a a0 -> Tee m a b #

(<$) :: a0 -> Tee m a b -> Tee m a a0 #

(Monoid b, Monad m) => Monoid (Tee m a b) Source #

<> distributes the input to both the argument Tees and combines their outputs using the Monoid instance of the output type.

Instance details

Defined in Streamly.Internal.Data.Fold.Tee

Methods

mempty :: Tee m a b #

mappend :: Tee m a b -> Tee m a b -> Tee m a b #

mconcat :: [Tee m a b] -> Tee m a b #

(Semigroup b, Monad m) => Semigroup (Tee m a b) Source #

<> distributes the input to both the argument Tees and combines their outputs using the Semigroup instance of the output type.

Instance details

Defined in Streamly.Internal.Data.Fold.Tee

Methods

(<>) :: Tee m a b -> Tee m a b -> Tee m a b #

sconcat :: NonEmpty (Tee m a b) -> Tee m a b #

stimes :: Integral b0 => b0 -> Tee m a b -> Tee m a b #

(Monad m, Floating b) => Floating (Tee m a b) Source #

Binary Floating operations distribute the input to both the argument Tees and combine their outputs using the Floating instance of the output type.

Instance details

Defined in Streamly.Internal.Data.Fold.Tee

Methods

pi :: Tee m a b #

exp :: Tee m a b -> Tee m a b #

log :: Tee m a b -> Tee m a b #

sqrt :: Tee m a b -> Tee m a b #

(**) :: Tee m a b -> Tee m a b -> Tee m a b #

logBase :: Tee m a b -> Tee m a b -> Tee m a b #

sin :: Tee m a b -> Tee m a b #

cos :: Tee m a b -> Tee m a b #

tan :: Tee m a b -> Tee m a b #

asin :: Tee m a b -> Tee m a b #

acos :: Tee m a b -> Tee m a b #

atan :: Tee m a b -> Tee m a b #

sinh :: Tee m a b -> Tee m a b #

cosh :: Tee m a b -> Tee m a b #

tanh :: Tee m a b -> Tee m a b #

asinh :: Tee m a b -> Tee m a b #

acosh :: Tee m a b -> Tee m a b #

atanh :: Tee m a b -> Tee m a b #

log1p :: Tee m a b -> Tee m a b #

expm1 :: Tee m a b -> Tee m a b #

log1pexp :: Tee m a b -> Tee m a b #

log1mexp :: Tee m a b -> Tee m a b #

(Monad m, Num b) => Num (Tee m a b) Source #

Binary Num operations distribute the input to both the argument Tees and combine their outputs using the Num instance of the output type.

Instance details

Defined in Streamly.Internal.Data.Fold.Tee

Methods

(+) :: Tee m a b -> Tee m a b -> Tee m a b #

(-) :: Tee m a b -> Tee m a b -> Tee m a b #

(*) :: Tee m a b -> Tee m a b -> Tee m a b #

negate :: Tee m a b -> Tee m a b #

abs :: Tee m a b -> Tee m a b #

signum :: Tee m a b -> Tee m a b #

fromInteger :: Integer -> Tee m a b #

(Monad m, Fractional b) => Fractional (Tee m a b) Source #

Binary Fractional operations distribute the input to both the argument Tees and combine their outputs using the Fractional instance of the output type.

Instance details

Defined in Streamly.Internal.Data.Fold.Tee

Methods

(/) :: Tee m a b -> Tee m a b -> Tee m a b #

recip :: Tee m a b -> Tee m a b #

fromRational :: Rational -> Tee m a b #

Constructors

foldl' :: Monad m => (b -> a -> b) -> b -> Fold m a b Source #

Make a fold from a left fold style pure step function and initial value of the accumulator.

If your Fold returns only Partial (i.e. never returns a Done) then you can use foldl'* constructors.

A fold with an extract function can be expressed using fmap:

mkfoldlx :: Monad m => (s -> a -> s) -> s -> (s -> b) -> Fold m a b
mkfoldlx step initial extract = fmap extract (foldl' step initial)

foldlM' :: Monad m => (b -> a -> m b) -> m b -> Fold m a b Source #

Make a fold from a left fold style monadic step function and initial value of the accumulator.

A fold with an extract function can be expressed using rmapM:

mkFoldlxM :: Functor m => (s -> a -> m s) -> m s -> (s -> m b) -> Fold m a b
mkFoldlxM step initial extract = rmapM extract (foldlM' step initial)

foldl1' :: Monad m => (a -> a -> a) -> Fold m a (Maybe a) Source #

Make a strict left fold, for non-empty streams, using first element as the starting value. Returns Nothing if the stream is empty.

Pre-release

foldlM1' :: Monad m => (a -> a -> m a) -> Fold m a (Maybe a) Source #

Like 'foldl1'' but with a monadic step function.

Pre-release

foldr' :: Monad m => (a -> b -> b) -> b -> Fold m a b Source #

Make a fold using a right fold style step function and a terminal value. It performs a strict right fold via a left fold using function composition. Note that a strict right fold can only be useful for constructing strict structures in memory. For reductions this will be very inefficient.

Definitions:

>>> foldr' f z = fmap (flip appEndo z) $ Fold.foldMap (Endo . f)
>>> foldr' f z = fmap ($ z) $ Fold.foldl' (\g x -> g . f x) id

Example:

>>> Stream.fold (Fold.foldr' (:) []) $ Stream.enumerateFromTo 1 5
[1,2,3,4,5]

Folds

Accumulators

Folds that never terminate, these folds are much like strict left folds. mconcat is the fundamental accumulator. All other accumulators can be expressed in terms of mconcat using a suitable Monoid. Instead of writing folds we could write Monoids and turn them into folds.

sconcat :: (Monad m, Semigroup a) => a -> Fold m a a Source #

Semigroup concat. Append the elements of an input stream to a provided starting value.

Definition:

>>> sconcat = Fold.foldl' (<>)
>>> semigroups = fmap Data.Monoid.Sum $ Stream.enumerateFromTo 1 10
>>> Stream.fold (Fold.sconcat 10) semigroups
Sum {getSum = 65}

mconcat :: (Monad m, Monoid a) => Fold m a a Source #

Monoid concat. Fold an input stream consisting of monoidal elements using mappend and mempty.

Definition:

>>> mconcat = Fold.sconcat mempty
>>> monoids = fmap Data.Monoid.Sum $ Stream.enumerateFromTo 1 10
>>> Stream.fold Fold.mconcat monoids
Sum {getSum = 55}

foldMap :: (Monad m, Monoid b) => (a -> b) -> Fold m a b Source #

Definition:

>>> foldMap f = Fold.lmap f Fold.mconcat

Make a fold from a pure function that folds the output of the function using mappend and mempty.

>>> sum = Fold.foldMap Data.Monoid.Sum
>>> Stream.fold sum $ Stream.enumerateFromTo 1 10
Sum {getSum = 55}

foldMapM :: (Monad m, Monoid b) => (a -> m b) -> Fold m a b Source #

Definition:

>>> foldMapM f = Fold.lmapM f Fold.mconcat

Make a fold from a monadic function that folds the output of the function using mappend and mempty.

>>> sum = Fold.foldMapM (return . Data.Monoid.Sum)
>>> Stream.fold sum $ Stream.enumerateFromTo 1 10
Sum {getSum = 55}

drain :: Monad m => Fold m a () Source #

A fold that drains all its input, running the effects and discarding the results.

>>> drain = Fold.drainMapM (const (return ()))
>>> drain = Fold.foldl' (\_ _ -> ()) ()

drainMapM :: Monad m => (a -> m b) -> Fold m a () Source #

Definitions:

>>> drainMapM f = Fold.lmapM f Fold.drain
>>> drainMapM f = Fold.foldMapM (void . f)

Drain all input after passing it through a monadic function. This is the dual of mapM_ on stream producers.

length :: Monad m => Fold m a Int Source #

Determine the length of the input stream.

Definition:

>>> length = Fold.lengthGeneric
>>> length = fmap getSum $ Fold.foldMap (Sum . const  1)

countDistinct :: (Monad m, Ord a) => Fold m a Int Source #

Count non-duplicate elements in the stream.

Definition:

>>> countDistinct = fmap Set.size Fold.toSet
>>> countDistinct = Fold.postscan Fold.nub $ Fold.catMaybes $ Fold.length

The memory used is proportional to the number of distinct elements in the stream, to guard against using too much memory use it as a scan and terminate if the count reaches more than a threshold.

Space: \(\mathcal{O}(n)\)

Pre-release

countDistinctInt :: Monad m => Fold m Int Int Source #

Like countDistinct but specialized to a stream of Int, for better performance.

Definition:

>>> countDistinctInt = fmap IntSet.size Fold.toIntSet
>>> countDistinctInt = Fold.postscan Fold.nubInt $ Fold.catMaybes $ Fold.length

Pre-release

frequency :: (Monad m, Ord a) => Fold m a (Map a Int) Source #

Determine the frequency of each element in the stream.

You can just collect the keys of the resulting map to get the unique elements in the stream.

Definition:

>>> frequency = Fold.toMap id Fold.length

sum :: (Monad m, Num a) => Fold m a a Source #

Determine the sum of all elements of a stream of numbers. Returns additive identity (0) when the stream is empty. Note that this is not numerically stable for floating point numbers.

>>> sum = Fold.cumulative Fold.windowSum

Same as following but numerically stable:

>>> sum = Fold.foldl' (+) 0
>>> sum = fmap Data.Monoid.getSum $ Fold.foldMap Data.Monoid.Sum

product :: (Monad m, Num a, Eq a) => Fold m a a Source #

Determine the product of all elements of a stream of numbers. Returns multiplicative identity (1) when the stream is empty. The fold terminates when it encounters (0) in its input.

Same as the following but terminates on multiplication by 0:

>>> product = fmap Data.Monoid.getProduct $ Fold.foldMap Data.Monoid.Product

mean :: (Monad m, Fractional a) => Fold m a a Source #

Compute a numerically stable arithmetic mean of all elements in the input stream.

rollingHash :: (Monad m, Enum a) => Fold m a Int64 Source #

Compute an Int sized polynomial rolling hash of a stream.

>>> rollingHash = Fold.rollingHashWithSalt Fold.defaultSalt

rollingHashWithSalt :: (Monad m, Enum a) => Int64 -> Fold m a Int64 Source #

Compute an Int sized polynomial rolling hash

H = salt * k ^ n + c1 * k ^ (n - 1) + c2 * k ^ (n - 2) + ... + cn * k ^ 0

Where c1, c2, cn are the elements in the input stream and k is a constant.

This hash is often used in Rabin-Karp string search algorithm.

See https://en.wikipedia.org/wiki/Rolling_hash

toList :: Monad m => Fold m a [a] Source #

Folds the input stream to a list.

Warning! working on large lists accumulated as buffers in memory could be very inefficient, consider using Streamly.Data.Array instead.

>>> toList = Fold.foldr' (:) []

toListRev :: Monad m => Fold m a [a] Source #

Buffers the input stream to a list in the reverse order of the input.

Definition:

>>> toListRev = Fold.foldl' (flip (:)) []

Warning! working on large lists accumulated as buffers in memory could be very inefficient, consider using Streamly.Array instead.

toSet :: (Monad m, Ord a) => Fold m a (Set a) Source #

Fold the input to a set.

Definition:

>>> toSet = Fold.foldl' (flip Set.insert) Set.empty

toIntSet :: Monad m => Fold m Int IntSet Source #

Fold the input to an int set. For integer inputs this performs better than toSet.

Definition:

>>> toIntSet = Fold.foldl' (flip IntSet.insert) IntSet.empty

topBy :: (MonadIO m, Unbox a) => (a -> a -> Ordering) -> Int -> Fold m a (MutArray a) Source #

Get the top n elements using the supplied comparison function.

To get bottom n elements instead:

>>> bottomBy cmp = Fold.topBy (flip cmp)

Example:

>>> stream = Stream.fromList [2::Int,7,9,3,1,5,6,11,17]
>>> Stream.fold (Fold.topBy compare 3) stream >>= MutArray.toList
[17,11,9]

Pre-release

Non-Empty Accumulators

Accumulators that do not have a default value, therefore, return Nothing on an empty stream.

latest :: Monad m => Fold m a (Maybe a) Source #

Returns the latest element of the input stream, if any.

>>> latest = Fold.foldl1' (\_ x -> x)
>>> latest = fmap getLast $ Fold.foldMap (Last . Just)

maximumBy :: Monad m => (a -> a -> Ordering) -> Fold m a (Maybe a) Source #

Determine the maximum element in a stream using the supplied comparison function.

maximum :: (Monad m, Ord a) => Fold m a (Maybe a) Source #

Determine the maximum element in a stream.

Definitions:

>>> maximum = Fold.maximumBy compare
>>> maximum = Fold.foldl1' max

Same as the following but without a default maximum. The Max Monoid uses the minBound as the default maximum:

>>> maximum = fmap Data.Semigroup.getMax $ Fold.foldMap Data.Semigroup.Max

minimumBy :: Monad m => (a -> a -> Ordering) -> Fold m a (Maybe a) Source #

Computes the minimum element with respect to the given comparison function

minimum :: (Monad m, Ord a) => Fold m a (Maybe a) Source #

Determine the minimum element in a stream using the supplied comparison function.

Definitions:

>>> minimum = Fold.minimumBy compare
>>> minimum = Fold.foldl1' min

Same as the following but without a default minimum. The Min Monoid uses the maxBound as the default maximum:

>>> maximum = fmap Data.Semigroup.getMin $ Fold.foldMap Data.Semigroup.Min

Filtering Scanners

Accumulators that are usually run as a scan using the scanMaybe combinator.

findIndices :: Monad m => (a -> Bool) -> Fold m a (Maybe Int) Source #

Returns the index of the latest element if the element satisfies the given predicate.

elemIndices :: (Monad m, Eq a) => a -> Fold m a (Maybe Int) Source #

Returns the index of the latest element if the element matches the given value.

Definition:

>>> elemIndices a = Fold.findIndices (== a)

deleteBy :: Monad m => (a -> a -> Bool) -> a -> Fold m a (Maybe a) Source #

Returns the latest element omitting the first occurrence that satisfies the given equality predicate.

Example:

>>> input = Stream.fromList [1,3,3,5]
>>> Stream.fold Fold.toList $ Stream.scanMaybe (Fold.deleteBy (==) 3) input
[1,3,5]

uniqBy :: Monad m => (a -> a -> Bool) -> Fold m a (Maybe a) Source #

Return the latest unique element using the supplied comparison function. Returns Nothing if the current element is same as the last element otherwise returns Just.

Example, strip duplicate path separators:

>>> input = Stream.fromList "//a//b"
>>> f x y = x == '/' && y == '/'
>>> Stream.fold Fold.toList $ Stream.scanMaybe (Fold.uniqBy f) input
"/a/b"

Space: O(1)

Pre-release

nub :: (Monad m, Ord a) => Fold m a (Maybe a) Source #

Used as a scan. Returns Just for the first occurrence of an element, returns Nothing for any other occurrences.

Example:

>>> stream = Stream.fromList [1::Int,1,2,3,4,4,5,1,5,7]
>>> Stream.fold Fold.toList $ Stream.scanMaybe Fold.nub stream
[1,2,3,4,5,7]

Pre-release

nubInt :: Monad m => Fold m Int (Maybe Int) Source #

Like nub but specialized to a stream of Int, for better performance.

Pre-release

Terminating Folds

one :: Monad m => Fold m a (Maybe a) Source #

Take one element from the stream and stop.

Definition:

>>> one = Fold.maybe Just

This is similar to the stream uncons operation.

null :: Monad m => Fold m a Bool Source #

Consume one element, return True if successful else return False. In other words, test if the input is empty or not.

WARNING! It consumes one element if the stream is not empty. If that is not what you want please use the eof parser instead.

Definition:

>>> null = fmap isJust Fold.one

index :: Monad m => Int -> Fold m a (Maybe a) Source #

Return the element at the given index.

Definition:

>>> index = Fold.indexGeneric

the :: (Monad m, Eq a) => Fold m a (Maybe a) Source #

Terminates with Nothing as soon as it finds an element different than the previous one, returns the element if the entire input consists of the same element.

find :: Monad m => (a -> Bool) -> Fold m a (Maybe a) Source #

Returns the first element that satisfies the given predicate.

findM :: Monad m => (a -> m Bool) -> Fold m a (Maybe a) Source #

Returns the first element that satisfies the given predicate.

Pre-release

lookup :: (Eq a, Monad m) => a -> Fold m (a, b) (Maybe b) Source #

In a stream of (key-value) pairs (a, b), return the value b of the first pair where the key equals the given value a.

Definition:

>>> lookup x = fmap snd <$> Fold.find ((== x) . fst)

findIndex :: Monad m => (a -> Bool) -> Fold m a (Maybe Int) Source #

Returns the first index that satisfies the given predicate.

elemIndex :: (Eq a, Monad m) => a -> Fold m a (Maybe Int) Source #

Returns the first index where a given value is found in the stream.

Definition:

>>> elemIndex a = Fold.findIndex (== a)

elem :: (Eq a, Monad m) => a -> Fold m a Bool Source #

Return True if the given element is present in the stream.

Definition:

>>> elem a = Fold.any (== a)

notElem :: (Eq a, Monad m) => a -> Fold m a Bool Source #

Returns True if the given element is not present in the stream.

Definition:

>>> notElem a = Fold.all (/= a)

all :: Monad m => (a -> Bool) -> Fold m a Bool Source #

Returns True if all elements of the input satisfy the predicate.

Definition:

>>> all p = Fold.lmap p Fold.and

Example:

>>> Stream.fold (Fold.all (== 0)) $ Stream.fromList [1,0,1]
False

any :: Monad m => (a -> Bool) -> Fold m a Bool Source #

Returns True if any element of the input satisfies the predicate.

Definition:

>>> any p = Fold.lmap p Fold.or

Example:

>>> Stream.fold (Fold.any (== 0)) $ Stream.fromList [1,0,1]
True

and :: Monad m => Fold m Bool Bool Source #

Returns True if all elements are True, False otherwise

Definition:

>>> and = Fold.all (== True)

or :: Monad m => Fold m Bool Bool Source #

Returns True if any element is True, False otherwise

Definition:

>>> or = Fold.any (== True)

Incremental builders

Mutable arrays (Streamly.Data.MutArray) are basic builders. You can use the snoc or writeAppend operations to incrementally build mutable arrays. The addOne and addStream combinators can be used to incrementally build any type of structure using a fold, including arrays or a stream of arrays.

Use pinned arrays if you are going to use the data for IO.

addOne :: Monad m => a -> Fold m a b -> m (Fold m a b) Source #

Append a singleton value to the fold.

See examples under addStream.

Pre-release

addStream :: Monad m => Stream m a -> Fold m a b -> m (Fold m a b) Source #

Append a stream to a fold to build the fold accumulator incrementally. We can repeatedly call addStream on the same fold to continue building the fold and finally use drive to finish the fold and extract the result. Also see the addOne operation which is a singleton version of addStream.

Definitions:

>>> addStream stream = Fold.drive stream . Fold.duplicate

Example, build a list incrementally:

>>> :{
pure (Fold.toList :: Fold IO Int [Int])
    >>= Fold.addOne 1
    >>= Fold.addStream (Stream.enumerateFromTo 2 4)
    >>= Fold.drive Stream.nil
    >>= print
:}
[1,2,3,4]

This can be used as an O(n) list append compared to the O(n^2) ++ when used for incrementally building a list.

Example, build a stream incrementally:

>>> :{
pure (Fold.toStream :: Fold IO Int (Stream Identity Int))
    >>= Fold.addOne 1
    >>= Fold.addStream (Stream.enumerateFromTo 2 4)
    >>= Fold.drive Stream.nil
    >>= print
:}
fromList [1,2,3,4]

This can be used as an O(n) stream append compared to the O(n^2) <> when used for incrementally building a stream.

Example, build an array incrementally:

>>> :{
pure (Array.write :: Fold IO Int (Array Int))
    >>= Fold.addOne 1
    >>= Fold.addStream (Stream.enumerateFromTo 2 4)
    >>= Fold.drive Stream.nil
    >>= print
:}
fromList [1,2,3,4]

Example, build an array stream incrementally:

>>> :{
let f :: Fold IO Int (Stream Identity (Array Int))
    f = Fold.groupsOf 2 (Array.writeN 3) Fold.toStream
in pure f
    >>= Fold.addOne 1
    >>= Fold.addStream (Stream.enumerateFromTo 2 4)
    >>= Fold.drive Stream.nil
    >>= print
:}
fromList [fromList [1,2],fromList [3,4]]

duplicate :: Monad m => Fold m a b -> Fold m a (Fold m a b) Source #

duplicate provides the ability to run a fold in parts. The duplicated fold consumes the input and returns the same fold as output instead of returning the final result, the returned fold can be run later to consume more input.

duplicate essentially appends a stream to the fold without finishing the fold. Compare with snoc which appends a singleton value to the fold.

Pre-release

Combinators

Combinators are modifiers of folds. In the type Fold m a b, a is the input type and b is the output type. Transformations can be applied either on the input side (contravariant) or on the output side (covariant). Therefore, combinators are of one of the following general shapes:

  • ... -> Fold m a b -> Fold m c b (input transformation)
  • ... -> Fold m a b -> Fold m a c (output transformation)

The input side transformations are more interesting for folds. Most of the following sections describe the input transformation operations on a fold. When an operation makes sense on both input and output side we use the prefix l (for left) for input side operations and the prefix r (for right) for output side operations.

Mapping on output

The Functor instance of a fold maps on the output of the fold:

>>> Stream.fold (fmap show Fold.sum) (Stream.enumerateFromTo 1 100)
"5050"

rmapM :: Monad m => (b -> m c) -> Fold m a b -> Fold m a c Source #

Map a monadic function on the output of a fold.

Mapping on Input

lmap :: (a -> b) -> Fold m b r -> Fold m a r Source #

lmap f fold maps the function f on the input of the fold.

Definition:

>>> lmap = Fold.lmapM return

Example:

>>> sumSquared = Fold.lmap (\x -> x * x) Fold.sum
>>> Stream.fold sumSquared (Stream.enumerateFromTo 1 100)
338350

lmapM :: Monad m => (a -> m b) -> Fold m b r -> Fold m a r Source #

lmapM f fold maps the monadic function f on the input of the fold.

Scanning and Filtering

scan :: Monad m => Fold m a b -> Fold m b c -> Fold m a c Source #

Scan the input of a Fold to change it in a stateful manner using another Fold. The scan stops as soon as the fold terminates.

Pre-release

postscan :: Monad m => Fold m a b -> Fold m b c -> Fold m a c Source #

Postscan the input of a Fold to change it in a stateful manner using another Fold.

postscan scanner collector

Pre-release

scanMaybe :: Monad m => Fold m a (Maybe b) -> Fold m b c -> Fold m a c Source #

Use a Maybe returning fold as a filtering scan.

>>> scanMaybe p f = Fold.postscan p (Fold.catMaybes f)

Pre-release

filter :: Monad m => (a -> Bool) -> Fold m a r -> Fold m a r Source #

Include only those elements that pass a predicate.

>>> Stream.fold (Fold.filter (> 5) Fold.sum) $ Stream.fromList [1..10]
40
>>> filter p = Fold.scanMaybe (Fold.filtering p)
>>> filter p = Fold.filterM (return . p)
>>> filter p = Fold.mapMaybe (\x -> if p x then Just x else Nothing)

filterM :: Monad m => (a -> m Bool) -> Fold m a r -> Fold m a r Source #

Like filter but with a monadic predicate.

>>> f p x = p x >>= \r -> return $ if r then Just x else Nothing
>>> filterM p = Fold.mapMaybeM (f p)

mapMaybe :: Monad m => (a -> Maybe b) -> Fold m b r -> Fold m a r Source #

mapMaybe f fold maps a Maybe returning function f on the input of the fold, filters out Nothing elements, and return the values extracted from Just.

>>> mapMaybe f = Fold.lmap f . Fold.catMaybes
>>> mapMaybe f = Fold.mapMaybeM (return . f)
>>> f x = if even x then Just x else Nothing
>>> fld = Fold.mapMaybe f Fold.toList
>>> Stream.fold fld (Stream.enumerateFromTo 1 10)
[2,4,6,8,10]

catMaybes :: Monad m => Fold m a b -> Fold m (Maybe a) b Source #

Modify a fold to receive a Maybe input, the Just values are unwrapped and sent to the original fold, Nothing values are discarded.

>>> catMaybes = Fold.mapMaybe id
>>> catMaybes = Fold.filter isJust . Fold.lmap fromJust

catLefts :: Monad m => Fold m a c -> Fold m (Either a b) c Source #

Discard Rights and unwrap Lefts in an Either stream.

Pre-release

catRights :: Monad m => Fold m b c -> Fold m (Either a b) c Source #

Discard Lefts and unwrap Rights in an Either stream.

Pre-release

catEithers :: Fold m a b -> Fold m (Either a a) b Source #

Remove the either wrapper and flatten both lefts and as well as rights in the output stream.

Definition:

>>> catEithers = Fold.lmap (either id id)

Pre-release

Trimming

take :: Monad m => Int -> Fold m a b -> Fold m a b Source #

Take at most n input elements and fold them using the supplied fold. A negative count is treated as 0.

>>> Stream.fold (Fold.take 2 Fold.toList) $ Stream.fromList [1..10]
[1,2]

takeEndBy :: Monad m => (a -> Bool) -> Fold m a b -> Fold m a b Source #

Take the input, stop when the predicate succeeds taking the succeeding element as well.

Example:

>>> input = Stream.fromList "hello\nthere\n"
>>> line = Fold.takeEndBy (== '\n') Fold.toList
>>> Stream.fold line input
"hello\n"
>>> Stream.fold Fold.toList $ Stream.foldMany line input
["hello\n","there\n"]

takeEndBy_ :: Monad m => (a -> Bool) -> Fold m a b -> Fold m a b Source #

Like takeEndBy but drops the element on which the predicate succeeds.

Example:

>>> input = Stream.fromList "hello\nthere\n"
>>> line = Fold.takeEndBy_ (== '\n') Fold.toList
>>> Stream.fold line input
"hello"
>>> Stream.fold Fold.toList $ Stream.foldMany line input
["hello","there"]

Splitting

splitWith :: Monad m => (a -> b -> c) -> Fold m x a -> Fold m x b -> Fold m x c Source #

Sequential fold application. Apply two folds sequentially to an input stream. The input is provided to the first fold, when it is done - the remaining input is provided to the second fold. When the second fold is done or if the input stream is over, the outputs of the two folds are combined using the supplied function.

Example:

>>> header = Fold.take 8 Fold.toList
>>> line = Fold.takeEndBy (== '\n') Fold.toList
>>> f = Fold.splitWith (,) header line
>>> Stream.fold f $ Stream.fromList "header: hello\n"
("header: ","hello\n")

Note: This is dual to appending streams using append.

Note: this implementation allows for stream fusion but has quadratic time complexity, because each composition adds a new branch that each subsequent fold's input element has to traverse, therefore, it cannot scale to a large number of compositions. After around 100 compositions the performance starts dipping rapidly compared to a CPS style implementation.

For larger number of compositions you can convert the fold to a parser and use ParserK.

Time: O(n^2) where n is the number of compositions.

many :: Monad m => Fold m a b -> Fold m b c -> Fold m a c Source #

Collect zero or more applications of a fold. many first second applies the first fold repeatedly on the input stream and accumulates it's results using the second fold.

>>> two = Fold.take 2 Fold.toList
>>> twos = Fold.many two Fold.toList
>>> Stream.fold twos $ Stream.fromList [1..10]
[[1,2],[3,4],[5,6],[7,8],[9,10]]

Stops when second fold stops.

See also: concatMap, foldMany

groupsOf :: Monad m => Int -> Fold m a b -> Fold m b c -> Fold m a c Source #

groupsOf n split collect repeatedly applies the split fold to chunks of n items in the input stream and supplies the result to the collect fold.

Definition:

>>> groupsOf n split = Fold.many (Fold.take n split)

Example:

>>> twos = Fold.groupsOf 2 Fold.toList Fold.toList
>>> Stream.fold twos $ Stream.fromList [1..10]
[[1,2],[3,4],[5,6],[7,8],[9,10]]

Stops when collect stops.

Parallel Distribution

For applicative composition using distribution see Streamly.Internal.Data.Fold.Tee.

teeWith :: Monad m => (a -> b -> c) -> Fold m x a -> Fold m x b -> Fold m x c Source #

teeWith k f1 f2 distributes its input to both f1 and f2 until both of them terminate and combines their output using k.

Definition:

>>> teeWith k f1 f2 = fmap (uncurry k) (Fold.tee f1 f2)

Example:

>>> avg = Fold.teeWith (/) Fold.sum (fmap fromIntegral Fold.length)
>>> Stream.fold avg $ Stream.fromList [1.0..100.0]
50.5

For applicative composition using this combinator see Streamly.Data.Fold.Tee.

See also: Streamly.Data.Fold.Tee

Note that nested applications of teeWith do not fuse.

tee :: Monad m => Fold m a b -> Fold m a c -> Fold m a (b, c) Source #

Distribute one copy of the stream to each fold and zip the results.

                |-------Fold m a b--------|
---stream m a---|                         |---m (b,c)
                |-------Fold m a c--------|

Definition:

>>> tee = Fold.teeWith (,)

Example:

>>> t = Fold.tee Fold.sum Fold.length
>>> Stream.fold t (Stream.enumerateFromTo 1.0 100.0)
(5050.0,100)

distribute :: Monad m => [Fold m a b] -> Fold m a [b] Source #

Distribute one copy of the stream to each fold and collect the results in a container.

                |-------Fold m a b--------|
---stream m a---|                         |---m [b]
                |-------Fold m a b--------|
                |                         |
                           ...
>>> Stream.fold (Fold.distribute [Fold.sum, Fold.length]) (Stream.enumerateFromTo 1 5)
[15,5]
>>> distribute = Prelude.foldr (Fold.teeWith (:)) (Fold.fromPure [])

This is the consumer side dual of the producer side sequence operation.

Stops when all the folds stop.

Partitioning

Direct items in the input stream to different folds using a binary fold selector.

partition :: Monad m => Fold m b x -> Fold m c y -> Fold m (Either b c) (x, y) Source #

Compose two folds such that the combined fold accepts a stream of Either and routes the Left values to the first fold and Right values to the second fold.

Definition:

>>> partition = Fold.partitionBy id

Key-value Collectors

toMap :: (Monad m, Ord k) => (a -> k) -> Fold m a b -> Fold m a (Map k b) Source #

Split the input stream based on a key field and fold each split using the given fold. Useful for map/reduce, bucketizing the input in different bins or for generating histograms.

Example:

>>> import Data.Map.Strict (Map)
>>> :{
 let input = Stream.fromList [("ONE",1),("ONE",1.1),("TWO",2), ("TWO",2.2)]
     classify = Fold.toMap fst (Fold.lmap snd Fold.toList)
  in Stream.fold classify input :: IO (Map String [Double])
:}
fromList [("ONE",[1.0,1.1]),("TWO",[2.0,2.2])]

Once the classifier fold terminates for a particular key any further inputs in that bucket are ignored.

Space used is proportional to the number of keys seen till now and monotonically increases because it stores whether a key has been seen or not.

See demuxToMap for a more powerful version where you can use a different fold for each key. A simpler version of toMap retaining only the last value for a key can be written as:

>>> toMap = Fold.foldl' (\kv (k, v) -> Map.insert k v kv) Map.empty

Stops: never

Pre-release

toMapIO :: (MonadIO m, Ord k) => (a -> k) -> Fold m a b -> Fold m a (Map k b) Source #

Same as toMap but maybe faster because it uses mutable cells as fold accumulators in the Map.

demuxToMap :: (Monad m, Ord k) => (a -> k) -> (a -> m (Fold m a b)) -> Fold m a (Map k b) Source #

This collects all the results of demux in a Map.

demuxToMapIO :: (MonadIO m, Ord k) => (a -> k) -> (a -> m (Fold m a b)) -> Fold m a (Map k b) Source #

Same as demuxToMap but uses demuxIO for better performance.

Key-value Scanners

classify :: (Monad m, Ord k) => (a -> k) -> Fold m a b -> Fold m a (m (Map k b), Maybe (k, b)) Source #

Folds the values for each key using the supplied fold. When scanning, as soon as the fold is complete, its result is available in the second component of the tuple. The first component of the tuple is a snapshot of the in-progress folds.

Once the fold for a key is done, any future values of the key are ignored.

Definition:

>>> classify f fld = Fold.demux f (const fld)

classifyIO :: (MonadIO m, Ord k) => (a -> k) -> Fold m a b -> Fold m a (m (Map k b), Maybe (k, b)) Source #

Same as classify except that it uses mutable IORef cells in the Map providing better performance. Be aware that if this is used as a scan, the values in the intermediate Maps would be mutable.

Definitions:

>>> classifyIO f fld = Fold.demuxIO f (const fld)

demux :: (Monad m, Ord k) => (a -> k) -> (a -> m (Fold m a b)) -> Fold m a (m (Map k b), Maybe (k, b)) Source #

demux getKey getFold: In a key value stream, fold values corresponding to each key using a key specific fold. getFold is invoked to generate a key specific fold when a key is encountered for the first time in the stream.

The first component of the output tuple is a key-value Map of in-progress folds. The fold returns the fold result as the second component of the output tuple whenever a fold terminates.

If a fold terminates, another instance of the fold is started upon receiving an input with that key, getFold is invoked again whenever the key is encountered again.

This can be used to scan a stream and collect the results from the scan output.

Since the fold generator function is monadic we can add folds dynamically. For example, we can maintain a Map of keys to folds in an IORef and lookup the fold from that corresponding to a key. This Map can be changed dynamically, folds for new keys can be added or folds for old keys can be deleted or modified.

Compare with classify, the fold in classify is a static fold.

Pre-release

demuxIO :: (MonadIO m, Ord k) => (a -> k) -> (a -> m (Fold m a b)) -> Fold m a (m (Map k b), Maybe (k, b)) Source #

This is specialized version of demux that uses mutable IO cells as fold accumulators for better performance.

Keep in mind that the values in the returned Map may be changed by the ongoing fold if you are using those concurrently in another thread.

Unzipping

unzip :: Monad m => Fold m a x -> Fold m b y -> Fold m (a, b) (x, y) Source #

Send the elements of tuples in a stream of tuples through two different folds.

                          |-------Fold m a x--------|
---------stream of (a,b)--|                         |----m (x,y)
                          |-------Fold m b y--------|

Definition:

>>> unzip = Fold.unzipWith id

This is the consumer side dual of the producer side zip operation.

Nesting

concatMap :: Monad m => (b -> Fold m a c) -> Fold m a b -> Fold m a c Source #

Map a Fold returning function on the result of a Fold and run the returned fold. This operation can be used to express data dependencies between fold operations.

Let's say the first element in the stream is a count of the following elements that we have to add, then:

>>> import Data.Maybe (fromJust)
>>> count = fmap fromJust Fold.one
>>> total n = Fold.take n Fold.sum
>>> Stream.fold (Fold.concatMap total count) $ Stream.fromList [10,9..1]
45

This does not fuse completely, see refold for a fusible alternative.

Time: O(n^2) where n is the number of compositions.

See also: foldIterateM, refold

Transforming the Monad

morphInner :: (forall x. m x -> n x) -> Fold m a b -> Fold n a b Source #

Change the underlying monad of a fold. Also known as hoist.

Pre-release

Deprecated

chunksOf :: Monad m => Int -> Fold m a b -> Fold m b c -> Fold m a c Source #

Deprecated: Please use groupsOf instead

foldr :: Monad m => (a -> b -> b) -> b -> Fold m a b Source #

Deprecated: Please use foldr' instead.

drainBy :: Monad m => (a -> m b) -> Fold m a () Source #

Deprecated: Please use drainMapM instead.

last :: Monad m => Fold m a (Maybe a) Source #

Deprecated: Please use latest instead.

head :: Monad m => Fold m a (Maybe a) Source #

Deprecated: Please use "one" instead

Extract the first element of the stream, if any.

>>> head = Fold.one

sequence :: Monad m => Fold m a (m b) -> Fold m a b Source #

Deprecated: Use "rmapM id" instead

Flatten the monadic output of a fold to pure output.

mapM :: Monad m => (b -> m c) -> Fold m a b -> Fold m a c Source #

Deprecated: Use rmapM instead

Map a monadic function on the output of a fold.

variance :: (Monad m, Fractional a) => Fold m a a Source #

Deprecated: Use the streamly-statistics package instead

Compute a numerically stable (population) variance over all elements in the input stream.

stdDev :: (Monad m, Floating a) => Fold m a a Source #

Deprecated: Use the streamly-statistics package instead

Compute a numerically stable (population) standard deviation over all elements in the input stream.

serialWith :: Monad m => (a -> b -> c) -> Fold m x a -> Fold m x b -> Fold m x c Source #

Deprecated: Please use "splitWith" instead