Vulkan.Extensions.VK_EXT_extended_dynamic_state

Name

VK_EXT_extended_dynamic_state - device extension

VK_EXT_extended_dynamic_state

Name String

VK_EXT_extended_dynamic_state

Extension Type

Device extension

Registered Extension Number

268

Revision

1

Extension and Version Dependencies

• Requires Vulkan 1.0
• Requires VK_KHR_get_physical_device_properties2

Contact

• Piers Daniell https://github.com/KhronosGroup/Vulkan-Docs/issues/new?title=VK_EXT_extended_dynamic_state:%20&body=@pdaniell-nv%20

Other Extension Metadata

Last Modified Date

2019-12-09

IP Status

No known IP claims.

Contributors

• Dan Ginsburg, Valve Corporation
• Graeme Leese, Broadcom
• Hans-Kristian Arntzen, Valve Corporation
• Jan-Harald Fredriksen, Arm Limited
• Jason Ekstrand, Intel
• Jeff Bolz, NVIDIA
• Jesse Hall, Google
• Philip Rebohle, Valve Corporation
• Stuart Smith, Imagination Technologies
• Tobias Hector, AMD

Description

This extension adds some more dynamic state to support applications that need to reduce the number of pipeline state objects they compile and bind.

New Commands

• cmdBindVertexBuffers2EXT

• cmdSetCullModeEXT
• cmdSetDepthBoundsTestEnableEXT
• cmdSetDepthCompareOpEXT
• cmdSetDepthTestEnableEXT
• cmdSetDepthWriteEnableEXT
• cmdSetFrontFaceEXT
• cmdSetPrimitiveTopologyEXT
• cmdSetScissorWithCountEXT
• cmdSetStencilOpEXT
• cmdSetStencilTestEnableEXT
• cmdSetViewportWithCountEXT

New Structures

• Extending PhysicalDeviceFeatures2, DeviceCreateInfo:

  • PhysicalDeviceExtendedDynamicStateFeaturesEXT

New Enum Constants

• EXT_EXTENDED_DYNAMIC_STATE_EXTENSION_NAME

• EXT_EXTENDED_DYNAMIC_STATE_SPEC_VERSION

• Extending DynamicState:

  • DYNAMIC_STATE_CULL_MODE_EXT
  • DYNAMIC_STATE_DEPTH_BOUNDS_TEST_ENABLE_EXT
  • DYNAMIC_STATE_DEPTH_COMPARE_OP_EXT
  • DYNAMIC_STATE_DEPTH_TEST_ENABLE_EXT
  • DYNAMIC_STATE_DEPTH_WRITE_ENABLE_EXT
  • DYNAMIC_STATE_FRONT_FACE_EXT
  • DYNAMIC_STATE_PRIMITIVE_TOPOLOGY_EXT
  • DYNAMIC_STATE_SCISSOR_WITH_COUNT_EXT
  • DYNAMIC_STATE_STENCIL_OP_EXT
  • DYNAMIC_STATE_STENCIL_TEST_ENABLE_EXT
  • DYNAMIC_STATE_VERTEX_INPUT_BINDING_STRIDE_EXT
  • DYNAMIC_STATE_VIEWPORT_WITH_COUNT_EXT

• Extending StructureType:

  • STRUCTURE_TYPE_PHYSICAL_DEVICE_EXTENDED_DYNAMIC_STATE_FEATURES_EXT

Version History

• Revision 1, 2019-12-09 (Piers Daniell)

  • Internal revisions

See Also

PhysicalDeviceExtendedDynamicStateFeaturesEXT, cmdBindVertexBuffers2EXT, cmdSetCullModeEXT, cmdSetDepthBoundsTestEnableEXT, cmdSetDepthCompareOpEXT, cmdSetDepthTestEnableEXT, cmdSetDepthWriteEnableEXT, cmdSetFrontFaceEXT, cmdSetPrimitiveTopologyEXT, cmdSetScissorWithCountEXT, cmdSetStencilOpEXT, cmdSetStencilTestEnableEXT, cmdSetViewportWithCountEXT

Document Notes

For more information, see the Vulkan Specification

This page is a generated document. Fixes and changes should be made to the generator scripts, not directly.

Documentation

cmdSetCullModeEXT

Arguments

:: forall io. MonadIO io

=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> CullModeFlags

cullMode specifies the cull mode property to use for drawing.

-> io ()

vkCmdSetCullModeEXT - Set the cull mode property

Valid Usage

• The extendedDynamicState feature must be enabled

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• cullMode must be a valid combination of CullModeFlagBits values
• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types
Primary Secondary	Both	Graphics

See Also

CommandBuffer, CullModeFlags

cmdSetFrontFaceEXT

Arguments

:: forall io. MonadIO io

=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> FrontFace

frontFace specifies the front face property to use for drawing.

-> io ()

vkCmdSetFrontFaceEXT - Set the front face property

Valid Usage

• The extendedDynamicState feature must be enabled

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• frontFace must be a valid FrontFace value
• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types
Primary Secondary	Both	Graphics

See Also

CommandBuffer, FrontFace

cmdSetPrimitiveTopologyEXT

Arguments

:: forall io. MonadIO io

=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> PrimitiveTopology

-> io ()

vkCmdSetPrimitiveTopologyEXT - Set the primitive topology state

Valid Usage

• The extendedDynamicState feature must be enabled

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• primitiveTopology must be a valid PrimitiveTopology value
• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types
Primary Secondary	Both	Graphics

See Also

CommandBuffer, PrimitiveTopology

cmdSetViewportWithCountEXT

Arguments

:: forall io. MonadIO io

=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("viewports" ::: Vector Viewport)

pViewports specifies the viewports to use for drawing.

-> io ()

vkCmdSetViewportWithCountEXT - Set the viewport count and viewports

Valid Usage

• The extendedDynamicState feature must be enabled

• viewportCount must be between 1 and PhysicalDeviceLimits::maxViewports, inclusive
• If the multiple viewports feature is not enabled, viewportCount must be 1
• commandBuffer must not have CommandBufferInheritanceViewportScissorInfoNV::viewportScissor2D enabled.

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• pViewports must be a valid pointer to an array of viewportCount valid Viewport structures
• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations
• viewportCount must be greater than 0

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types
Primary Secondary	Both	Graphics

See Also

CommandBuffer, Viewport

cmdSetScissorWithCountEXT

Arguments

:: forall io. MonadIO io

=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("scissors" ::: Vector Rect2D)

pScissors specifies the scissors to use for drawing.

-> io ()

vkCmdSetScissorWithCountEXT - Set the scissor count and scissors

Valid Usage

• The extendedDynamicState feature must be enabled

• scissorCount must be between 1 and PhysicalDeviceLimits::maxViewports, inclusive
• If the multiple viewports feature is not enabled, scissorCount must be 1
• The x and y members of offset member of any element of pScissors must be greater than or equal to 0
• Evaluation of (offset.x + extent.width) must not cause a signed integer addition overflow for any element of pScissors
• Evaluation of (offset.y + extent.height) must not cause a signed integer addition overflow for any element of pScissors
• commandBuffer must not have CommandBufferInheritanceViewportScissorInfoNV::viewportScissor2D enabled.

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• pScissors must be a valid pointer to an array of scissorCount Rect2D structures
• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations
• scissorCount must be greater than 0

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types
Primary Secondary	Both	Graphics

See Also

CommandBuffer, Rect2D

cmdBindVertexBuffers2EXT

Arguments

:: forall io. MonadIO io

=> CommandBuffer

commandBuffer is the command buffer into which the command is recorded.

-> ("firstBinding" ::: Word32)

firstBinding is the index of the first vertex input binding whose state is updated by the command.

-> ("buffers" ::: Vector Buffer)

pBuffers is a pointer to an array of buffer handles.

-> ("offsets" ::: Vector DeviceSize)

pOffsets is a pointer to an array of buffer offsets.

-> ("sizes" ::: Vector DeviceSize)

pSizes is NULL or a pointer to an array of the size in bytes of vertex data bound from pBuffers.

-> ("strides" ::: Vector DeviceSize)

pStrides is NULL or a pointer to an array of buffer strides.

-> io ()

vkCmdBindVertexBuffers2EXT - Bind vertex buffers to a command buffer

Description

The values taken from elements i of pBuffers and pOffsets replace the current state for the vertex input binding firstBinding + i, for i in [0, bindingCount). The vertex input binding is updated to start at the offset indicated by pOffsets[i] from the start of the buffer pBuffers[i]. If pSizes is not NULL then pSizes[i] specifies the bound size of the vertex buffer starting from the corresponding elements of pBuffers[i] plus pOffsets[i]. All vertex input attributes that use each of these bindings will use these updated addresses in their address calculations for subsequent drawing commands. If the nullDescriptor feature is enabled, elements of pBuffers can be NULL_HANDLE, and can be used by the vertex shader. If a vertex input attribute is bound to a vertex input binding that is NULL_HANDLE, the values taken from memory are considered to be zero, and missing G, B, or A components are filled with (0,0,1).

If the bound pipeline state object was created with the DYNAMIC_STATE_VERTEX_INPUT_BINDING_STRIDE_EXT dynamic state enabled then pStrides[i] specifies the distance in bytes between two consecutive elements within the corresponding buffer. In this case the VertexInputBindingDescription::stride state from the pipeline state object is ignored.

If the bound pipeline state object was also created with the DYNAMIC_STATE_VERTEX_INPUT_EXT dynamic state enabled then cmdSetVertexInputEXT can be used instead of cmdBindVertexBuffers2EXT to set the stride.

Valid Usage

• firstBinding must be less than PhysicalDeviceLimits::maxVertexInputBindings

• The sum of firstBinding and bindingCount must be less than or equal to PhysicalDeviceLimits::maxVertexInputBindings
• All elements of pOffsets must be less than the size of the corresponding element in pBuffers
• If pSizes is not NULL, all elements of pOffsets plus pSizes must be less than or equal to the size of the corresponding element in pBuffers
• All elements of pBuffers must have been created with the BUFFER_USAGE_VERTEX_BUFFER_BIT flag
• Each element of pBuffers that is non-sparse must be bound completely and contiguously to a single DeviceMemory object
• If the nullDescriptor feature is not enabled, all elements of pBuffers must not be NULL_HANDLE
• If an element of pBuffers is NULL_HANDLE, then the corresponding element of pOffsets must be zero
• If pStrides is not NULL each element of pStrides must be less than or equal to PhysicalDeviceLimits::maxVertexInputBindingStride
• If pStrides is not NULL each element of pStrides must be greater than or equal to the maximum extent of all vertex input attributes fetched from the corresponding binding, where the extent is calculated as the VertexInputAttributeDescription::offset plus VertexInputAttributeDescription::format size

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• pBuffers must be a valid pointer to an array of bindingCount valid Buffer handles
• pOffsets must be a valid pointer to an array of bindingCount DeviceSize values
• If pSizes is not NULL, pSizes must be a valid pointer to an array of bindingCount DeviceSize values
• If pStrides is not NULL, pStrides must be a valid pointer to an array of bindingCount DeviceSize values
• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations
• If any of pSizes, or pStrides are not NULL, bindingCount must be greater than 0
• Both of commandBuffer, and the elements of pBuffers must have been created, allocated, or retrieved from the same Device

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types
Primary Secondary	Both	Graphics

See Also

Buffer, CommandBuffer, DeviceSize

cmdSetDepthTestEnableEXT

Arguments

:: forall io. MonadIO io

=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("depthTestEnable" ::: Bool)

depthTestEnable specifies if the depth test is enabled.

-> io ()

vkCmdSetDepthTestEnableEXT - Set the depth test enable for a command buffer

Description

This command sets the state for a given draw when the graphics pipeline is created with DYNAMIC_STATE_DEPTH_TEST_ENABLE_EXT set in PipelineDynamicStateCreateInfo::pDynamicStates.

Valid Usage

• The extendedDynamicState feature must be enabled

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types
Primary Secondary	Both	Graphics

See Also

Bool32, CommandBuffer

cmdSetDepthWriteEnableEXT

Arguments

:: forall io. MonadIO io

=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("depthWriteEnable" ::: Bool)

depthWriteEnable specifies if depth writes are enabled.

-> io ()

vkCmdSetDepthWriteEnableEXT - Set the depth write enable for the command buffer

Description

This command sets the state for a given draw when the graphics pipeline is created with DYNAMIC_STATE_DEPTH_WRITE_ENABLE_EXT set in PipelineDynamicStateCreateInfo::pDynamicStates.

Valid Usage

• The extendedDynamicState feature must be enabled

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types
Primary Secondary	Both	Graphics

See Also

Bool32, CommandBuffer

cmdSetDepthCompareOpEXT

Arguments

:: forall io. MonadIO io

=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("depthCompareOp" ::: CompareOp)

depthCompareOp specifies the depth comparison operator.

-> io ()

vkCmdSetDepthCompareOpEXT - Set the depth comparison operator for the command buffer

Description

This command sets the state for a given draw when the graphics pipeline is created with DYNAMIC_STATE_DEPTH_COMPARE_OP_EXT set in PipelineDynamicStateCreateInfo::pDynamicStates.

Valid Usage

• The extendedDynamicState feature must be enabled

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• depthCompareOp must be a valid CompareOp value
• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types
Primary Secondary	Both	Graphics

See Also

CommandBuffer, CompareOp

cmdSetDepthBoundsTestEnableEXT

Arguments

:: forall io. MonadIO io

=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("depthBoundsTestEnable" ::: Bool)

depthBoundsTestEnable specifies if the depth bounds test is enabled.

-> io ()

vkCmdSetDepthBoundsTestEnableEXT - Set the depth bounds test enable for a command buffer

Description

This command sets the state for a given draw when the graphics pipeline is created with DYNAMIC_STATE_DEPTH_BOUNDS_TEST_ENABLE_EXT set in PipelineDynamicStateCreateInfo::pDynamicStates.

Valid Usage

• The extendedDynamicState feature must be enabled

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types
Primary Secondary	Both	Graphics

See Also

Bool32, CommandBuffer

cmdSetStencilTestEnableEXT

Arguments

:: forall io. MonadIO io

=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("stencilTestEnable" ::: Bool)

stencilTestEnable specifies if the stencil test is enabled.

-> io ()

vkCmdSetStencilTestEnableEXT - Set the stencil test enable for the command buffer

Description

This command sets the state for a given draw when the graphics pipeline is created with DYNAMIC_STATE_STENCIL_TEST_ENABLE_EXT set in PipelineDynamicStateCreateInfo::pDynamicStates.

Valid Usage

• The extendedDynamicState feature must be enabled

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types
Primary Secondary	Both	Graphics

See Also

Bool32, CommandBuffer

cmdSetStencilOpEXT

Arguments

:: forall io. MonadIO io

=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("faceMask" ::: StencilFaceFlags)

faceMask is a bitmask of StencilFaceFlagBits specifying the set of stencil state for which to update the stencil operation.

-> ("failOp" ::: StencilOp)

failOp is a StencilOp value specifying the action performed on samples that fail the stencil test.

-> ("passOp" ::: StencilOp)

passOp is a StencilOp value specifying the action performed on samples that pass both the depth and stencil tests.

-> ("depthFailOp" ::: StencilOp)

depthFailOp is a StencilOp value specifying the action performed on samples that pass the stencil test and fail the depth test.

-> CompareOp

compareOp is a CompareOp value specifying the comparison operator used in the stencil test.

-> io ()

vkCmdSetStencilOpEXT - Set the stencil operation for the command buffer

Description

This command sets the state for a given draw when the graphics pipeline is created with DYNAMIC_STATE_STENCIL_OP_EXT set in PipelineDynamicStateCreateInfo::pDynamicStates.

Valid Usage

• The extendedDynamicState feature must be enabled

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• faceMask must be a valid combination of StencilFaceFlagBits values
• faceMask must not be 0
• failOp must be a valid StencilOp value
• passOp must be a valid StencilOp value
• depthFailOp must be a valid StencilOp value
• compareOp must be a valid CompareOp value
• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types
Primary Secondary	Both	Graphics

See Also

CommandBuffer, CompareOp, StencilFaceFlags, StencilOp

data PhysicalDeviceExtendedDynamicStateFeaturesEXT

VkPhysicalDeviceExtendedDynamicStateFeaturesEXT - Structure describing what extended dynamic state can be used

Members

This structure describes the following feature:

Description

If the PhysicalDeviceExtendedDynamicStateFeaturesEXT structure is included in the pNext chain of the PhysicalDeviceFeatures2 structure passed to getPhysicalDeviceFeatures2, it is filled in to indicate whether each corresponding feature is supported. PhysicalDeviceExtendedDynamicStateFeaturesEXT can also be used in the pNext chain of DeviceCreateInfo to selectively enable these features.

Valid Usage (Implicit)

See Also

Bool32, StructureType

Constructors

PhysicalDeviceExtendedDynamicStateFeaturesEXT

Fields

• extendedDynamicState :: Bool

  extendedDynamicState indicates that the implementation supports the following dynamic states:

  • DYNAMIC_STATE_CULL_MODE_EXT
  • DYNAMIC_STATE_FRONT_FACE_EXT
  • DYNAMIC_STATE_PRIMITIVE_TOPOLOGY_EXT
  • DYNAMIC_STATE_VIEWPORT_WITH_COUNT_EXT
  • DYNAMIC_STATE_SCISSOR_WITH_COUNT_EXT
  • DYNAMIC_STATE_VERTEX_INPUT_BINDING_STRIDE_EXT
  • DYNAMIC_STATE_DEPTH_TEST_ENABLE_EXT
  • DYNAMIC_STATE_DEPTH_WRITE_ENABLE_EXT
  • DYNAMIC_STATE_DEPTH_COMPARE_OP_EXT
  • DYNAMIC_STATE_DEPTH_BOUNDS_TEST_ENABLE_EXT
  • DYNAMIC_STATE_STENCIL_TEST_ENABLE_EXT
  • DYNAMIC_STATE_STENCIL_OP_EXT

Instances

Eq PhysicalDeviceExtendedDynamicStateFeaturesEXT

Defined in Vulkan.Extensions.VK_EXT_extended_dynamic_state

Methods

(==) :: PhysicalDeviceExtendedDynamicStateFeaturesEXT -> PhysicalDeviceExtendedDynamicStateFeaturesEXT -> Bool

(/=) :: PhysicalDeviceExtendedDynamicStateFeaturesEXT -> PhysicalDeviceExtendedDynamicStateFeaturesEXT -> Bool

Show PhysicalDeviceExtendedDynamicStateFeaturesEXT

Defined in Vulkan.Extensions.VK_EXT_extended_dynamic_state

Methods

showsPrec :: Int -> PhysicalDeviceExtendedDynamicStateFeaturesEXT -> ShowS

show :: PhysicalDeviceExtendedDynamicStateFeaturesEXT -> String

showList :: [PhysicalDeviceExtendedDynamicStateFeaturesEXT] -> ShowS

Storable PhysicalDeviceExtendedDynamicStateFeaturesEXT

Defined in Vulkan.Extensions.VK_EXT_extended_dynamic_state

Methods

sizeOf :: PhysicalDeviceExtendedDynamicStateFeaturesEXT -> Int

alignment :: PhysicalDeviceExtendedDynamicStateFeaturesEXT -> Int

peekElemOff :: Ptr PhysicalDeviceExtendedDynamicStateFeaturesEXT -> Int -> IO PhysicalDeviceExtendedDynamicStateFeaturesEXT

pokeElemOff :: Ptr PhysicalDeviceExtendedDynamicStateFeaturesEXT -> Int -> PhysicalDeviceExtendedDynamicStateFeaturesEXT -> IO ()

peekByteOff :: Ptr b -> Int -> IO PhysicalDeviceExtendedDynamicStateFeaturesEXT

pokeByteOff :: Ptr b -> Int -> PhysicalDeviceExtendedDynamicStateFeaturesEXT -> IO ()

peek :: Ptr PhysicalDeviceExtendedDynamicStateFeaturesEXT -> IO PhysicalDeviceExtendedDynamicStateFeaturesEXT

poke :: Ptr PhysicalDeviceExtendedDynamicStateFeaturesEXT -> PhysicalDeviceExtendedDynamicStateFeaturesEXT -> IO ()

FromCStruct PhysicalDeviceExtendedDynamicStateFeaturesEXT

Defined in Vulkan.Extensions.VK_EXT_extended_dynamic_state

Methods

peekCStruct :: Ptr PhysicalDeviceExtendedDynamicStateFeaturesEXT -> IO PhysicalDeviceExtendedDynamicStateFeaturesEXT

ToCStruct PhysicalDeviceExtendedDynamicStateFeaturesEXT

Defined in Vulkan.Extensions.VK_EXT_extended_dynamic_state

Methods

withCStruct :: PhysicalDeviceExtendedDynamicStateFeaturesEXT -> (Ptr PhysicalDeviceExtendedDynamicStateFeaturesEXT -> IO b) -> IO b

pokeCStruct :: Ptr PhysicalDeviceExtendedDynamicStateFeaturesEXT -> PhysicalDeviceExtendedDynamicStateFeaturesEXT -> IO b -> IO b

withZeroCStruct :: (Ptr PhysicalDeviceExtendedDynamicStateFeaturesEXT -> IO b) -> IO b

pokeZeroCStruct :: Ptr PhysicalDeviceExtendedDynamicStateFeaturesEXT -> IO b -> IO b

cStructSize :: Int

cStructAlignment :: Int

Zero PhysicalDeviceExtendedDynamicStateFeaturesEXT

Defined in Vulkan.Extensions.VK_EXT_extended_dynamic_state

Methods

zero :: PhysicalDeviceExtendedDynamicStateFeaturesEXT

type EXT_EXTENDED_DYNAMIC_STATE_SPEC_VERSION = 1

pattern EXT_EXTENDED_DYNAMIC_STATE_SPEC_VERSION :: forall a. Integral a => a

type EXT_EXTENDED_DYNAMIC_STATE_EXTENSION_NAME = "VK_EXT_extended_dynamic_state"

pattern EXT_EXTENDED_DYNAMIC_STATE_EXTENSION_NAME :: forall a. (Eq a, IsString a) => a