| pattern DYNAMIC_STATE_VIEWPORT :: DynamicState | DYNAMIC_STATE_VIEWPORT specifies that the pViewports state in
PipelineViewportStateCreateInfo will be ignored
and must be set dynamically with
cmdSetViewport before any drawing
commands. The number of viewports used by a pipeline is still specified
by the viewportCount member of
PipelineViewportStateCreateInfo.
|
| pattern DYNAMIC_STATE_SCISSOR :: DynamicState | DYNAMIC_STATE_SCISSOR specifies that the pScissors state in
PipelineViewportStateCreateInfo will be ignored
and must be set dynamically with
cmdSetScissor before any drawing
commands. The number of scissor rectangles used by a pipeline is still
specified by the scissorCount member of
PipelineViewportStateCreateInfo.
|
| pattern DYNAMIC_STATE_LINE_WIDTH :: DynamicState | DYNAMIC_STATE_LINE_WIDTH specifies that the lineWidth state in
PipelineRasterizationStateCreateInfo will be
ignored and must be set dynamically with
cmdSetLineWidth before any drawing
commands that generate line primitives for the rasterizer.
|
| pattern DYNAMIC_STATE_DEPTH_BIAS :: DynamicState | DYNAMIC_STATE_DEPTH_BIAS specifies that any instance of
DepthBiasRepresentationInfoEXT
included in the pNext chain of
PipelineRasterizationStateCreateInfo as well as
the depthBiasConstantFactor, depthBiasClamp and
depthBiasSlopeFactor states in
PipelineRasterizationStateCreateInfo will be
ignored and must be set dynamically with either
cmdSetDepthBias or
cmdSetDepthBias2EXT before
any draws are performed with
depth bias enabled.
|
| pattern DYNAMIC_STATE_BLEND_CONSTANTS :: DynamicState | DYNAMIC_STATE_BLEND_CONSTANTS specifies that the blendConstants
state in PipelineColorBlendStateCreateInfo will
be ignored and must be set dynamically with
cmdSetBlendConstants before any
draws are performed with a pipeline state with
PipelineColorBlendAttachmentState member
blendEnable set to TRUE and any of
the blend functions using a constant blend color.
|
| pattern DYNAMIC_STATE_DEPTH_BOUNDS :: DynamicState | DYNAMIC_STATE_DEPTH_BOUNDS specifies that the minDepthBounds and
maxDepthBounds states of
PipelineDepthStencilStateCreateInfo will be
ignored and must be set dynamically with
cmdSetDepthBounds before any draws
are performed with a pipeline state with
PipelineDepthStencilStateCreateInfo member
depthBoundsTestEnable set to TRUE.
|
| pattern DYNAMIC_STATE_STENCIL_COMPARE_MASK :: DynamicState | DYNAMIC_STATE_STENCIL_COMPARE_MASK specifies that the compareMask
state in PipelineDepthStencilStateCreateInfo
for both front and back will be ignored and must be set
dynamically with
cmdSetStencilCompareMask before
any draws are performed with a pipeline state with
PipelineDepthStencilStateCreateInfo member
stencilTestEnable set to TRUE
|
| pattern DYNAMIC_STATE_STENCIL_WRITE_MASK :: DynamicState | DYNAMIC_STATE_STENCIL_WRITE_MASK specifies that the writeMask state
in PipelineDepthStencilStateCreateInfo for both
front and back will be ignored and must be set dynamically with
cmdSetStencilWriteMask before any
draws are performed with a pipeline state with
PipelineDepthStencilStateCreateInfo member
stencilTestEnable set to TRUE
|
| pattern DYNAMIC_STATE_STENCIL_REFERENCE :: DynamicState | DYNAMIC_STATE_STENCIL_REFERENCE specifies that the reference state
in PipelineDepthStencilStateCreateInfo for both
front and back will be ignored and must be set dynamically with
cmdSetStencilReference before any
draws are performed with a pipeline state with
PipelineDepthStencilStateCreateInfo member
stencilTestEnable set to TRUE
|
| pattern DYNAMIC_STATE_ATTACHMENT_FEEDBACK_LOOP_ENABLE_EXT :: DynamicState | DYNAMIC_STATE_ATTACHMENT_FEEDBACK_LOOP_ENABLE_EXT specifies that the
PIPELINE_CREATE_COLOR_ATTACHMENT_FEEDBACK_LOOP_BIT_EXT
and
PIPELINE_CREATE_DEPTH_STENCIL_ATTACHMENT_FEEDBACK_LOOP_BIT_EXT
flags will be ignored and must be set dynamically with
cmdSetAttachmentFeedbackLoopEnableEXT
before any draw call.
|
| pattern DYNAMIC_STATE_COVERAGE_REDUCTION_MODE_NV :: DynamicState | DYNAMIC_STATE_COVERAGE_REDUCTION_MODE_NV specifies that the
coverageReductionMode state in
PipelineCoverageReductionStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetCoverageReductionModeNV
before any draw call.
|
| pattern DYNAMIC_STATE_REPRESENTATIVE_FRAGMENT_TEST_ENABLE_NV :: DynamicState | DYNAMIC_STATE_REPRESENTATIVE_FRAGMENT_TEST_ENABLE_NV specifies that
the representativeFragmentTestEnable state in
PipelineRepresentativeFragmentTestStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetRepresentativeFragmentTestEnableNV
before any draw call.
|
| pattern DYNAMIC_STATE_SHADING_RATE_IMAGE_ENABLE_NV :: DynamicState | DYNAMIC_STATE_SHADING_RATE_IMAGE_ENABLE_NV specifies that the
shadingRateImageEnable state in
PipelineViewportShadingRateImageStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetShadingRateImageEnableNV
before any draw call.
|
| pattern DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_NV :: DynamicState | DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_NV specifies that the
coverageModulationTableCount, and pCoverageModulationTable states in
PipelineCoverageModulationStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetCoverageModulationTableNV
before any draw call.
|
| pattern DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_ENABLE_NV :: DynamicState | DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_ENABLE_NV specifies that the
coverageModulationTableEnable state in
PipelineCoverageModulationStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetCoverageModulationTableEnableNV
before any draw call.
|
| pattern DYNAMIC_STATE_COVERAGE_MODULATION_MODE_NV :: DynamicState | DYNAMIC_STATE_COVERAGE_MODULATION_MODE_NV specifies that the
coverageModulationMode state in
PipelineCoverageModulationStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetCoverageModulationModeNV
before any draw call.
|
| pattern DYNAMIC_STATE_COVERAGE_TO_COLOR_LOCATION_NV :: DynamicState | DYNAMIC_STATE_COVERAGE_TO_COLOR_LOCATION_NV specifies that the
coverageToColorLocation state in
PipelineCoverageToColorStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetCoverageToColorLocationNV
before any draw call.
|
| pattern DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV :: DynamicState | DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV specifies that the
coverageToColorEnable state in
PipelineCoverageToColorStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetCoverageToColorEnableNV
before any draw call.
|
| pattern DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV :: DynamicState | DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV specifies that the viewportCount,
and pViewportSwizzles states in
PipelineViewportSwizzleStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetViewportSwizzleNV
before any draw call.
|
| pattern DYNAMIC_STATE_VIEWPORT_W_SCALING_ENABLE_NV :: DynamicState | DYNAMIC_STATE_VIEWPORT_W_SCALING_ENABLE_NV specifies that the
viewportWScalingEnable state in
PipelineViewportWScalingStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetViewportWScalingEnableNV
before any draw call.
|
| pattern DYNAMIC_STATE_DEPTH_CLIP_NEGATIVE_ONE_TO_ONE_EXT :: DynamicState | DYNAMIC_STATE_DEPTH_CLIP_NEGATIVE_ONE_TO_ONE_EXT specifies that the
negativeOneToOne state in
PipelineViewportDepthClipControlCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetDepthClipNegativeOneToOneEXT
before any draw call.
|
| pattern DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT :: DynamicState | DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT specifies that the
stippledLineEnable state in
PipelineRasterizationLineStateCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetLineStippleEnableEXT
before any draw call.
|
| pattern DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT :: DynamicState | DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT specifies that the
lineRasterizationMode state in
PipelineRasterizationLineStateCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetLineRasterizationModeEXT
before any draw call.
|
| pattern DYNAMIC_STATE_PROVOKING_VERTEX_MODE_EXT :: DynamicState | DYNAMIC_STATE_PROVOKING_VERTEX_MODE_EXT specifies that the
provokingVertexMode state in
PipelineRasterizationProvokingVertexStateCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetProvokingVertexModeEXT
before any draw call.
|
| pattern DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT :: DynamicState | DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT specifies that the
colorBlendOp state in
PipelineColorBlendAttachmentState, and
srcPremultiplied, dstPremultiplied, and blendOverlap states in
PipelineColorBlendAdvancedStateCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetColorBlendAdvancedEXT
before any draw call.
|
| pattern DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT :: DynamicState | DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT specifies that the
sampleLocationsEnable state in
PipelineSampleLocationsStateCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetSampleLocationsEnableEXT
before any draw call.
|
| pattern DYNAMIC_STATE_DEPTH_CLIP_ENABLE_EXT :: DynamicState | DYNAMIC_STATE_DEPTH_CLIP_ENABLE_EXT specifies that the
depthClipEnable state in
PipelineRasterizationDepthClipStateCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetDepthClipEnableEXT
before any draw call.
|
| pattern :: DynamicState | DYNAMIC_STATE_EXTRA_PRIMITIVE_OVERESTIMATION_SIZE_EXT specifies that
the extraPrimitiveOverestimationSize state in
PipelineRasterizationConservativeStateCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetExtraPrimitiveOverestimationSizeEXT
before any draw call.
|
| pattern DYNAMIC_STATE_CONSERVATIVE_RASTERIZATION_MODE_EXT :: DynamicState | DYNAMIC_STATE_CONSERVATIVE_RASTERIZATION_MODE_EXT specifies that the
conservativeRasterizationMode state in
PipelineRasterizationConservativeStateCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetConservativeRasterizationModeEXT
before any draw call.
|
| pattern DYNAMIC_STATE_RASTERIZATION_STREAM_EXT :: DynamicState | DYNAMIC_STATE_RASTERIZATION_STREAM_EXT specifies that the
rasterizationStream state in
PipelineRasterizationStateStreamCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetRasterizationStreamEXT
before any draw call.
|
| pattern DYNAMIC_STATE_COLOR_WRITE_MASK_EXT :: DynamicState | DYNAMIC_STATE_COLOR_WRITE_MASK_EXT specifies that the colorWriteMask
state in PipelineColorBlendAttachmentState will
be ignored and must be set dynamically with
cmdSetColorWriteMaskEXT
before any draw call.
|
| pattern DYNAMIC_STATE_COLOR_BLEND_EQUATION_EXT :: DynamicState | DYNAMIC_STATE_COLOR_BLEND_EQUATION_EXT specifies that the
srcColorBlendFactor, dstColorBlendFactor, colorBlendOp,
srcAlphaBlendFactor, dstAlphaBlendFactor, and alphaBlendOp states
in PipelineColorBlendAttachmentState will be
ignored and must be set dynamically with
cmdSetColorBlendEquationEXT
before any draw call.
|
| pattern DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT :: DynamicState | DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT specifies that the blendEnable
state in PipelineColorBlendAttachmentState will
be ignored and must be set dynamically with
cmdSetColorBlendEnableEXT
before any draw call.
|
| pattern DYNAMIC_STATE_LOGIC_OP_ENABLE_EXT :: DynamicState | DYNAMIC_STATE_LOGIC_OP_ENABLE_EXT specifies that the logicOpEnable
state in PipelineColorBlendStateCreateInfo will
be ignored and must be set dynamically with
cmdSetLogicOpEnableEXT
before any draw call.
|
| pattern DYNAMIC_STATE_ALPHA_TO_ONE_ENABLE_EXT :: DynamicState | DYNAMIC_STATE_ALPHA_TO_ONE_ENABLE_EXT specifies that the
alphaToOneEnable state in
PipelineMultisampleStateCreateInfo will be
ignored and must be set dynamically with
cmdSetAlphaToOneEnableEXT
before any draw call.
|
| pattern DYNAMIC_STATE_ALPHA_TO_COVERAGE_ENABLE_EXT :: DynamicState | DYNAMIC_STATE_ALPHA_TO_COVERAGE_ENABLE_EXT specifies that the
alphaToCoverageEnable state in
PipelineMultisampleStateCreateInfo will be
ignored and must be set dynamically with
cmdSetAlphaToCoverageEnableEXT
before any draw call.
|
| pattern DYNAMIC_STATE_SAMPLE_MASK_EXT :: DynamicState | DYNAMIC_STATE_SAMPLE_MASK_EXT specifies that the pSampleMask state
in PipelineMultisampleStateCreateInfo will be
ignored and must be set dynamically with
cmdSetSampleMaskEXT
before any draw call.
|
| pattern DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT :: DynamicState | DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT specifies that the
rasterizationSamples state in
PipelineMultisampleStateCreateInfo will be
ignored and must be set dynamically with
cmdSetRasterizationSamplesEXT
before any draw call.
|
| pattern DYNAMIC_STATE_POLYGON_MODE_EXT :: DynamicState | DYNAMIC_STATE_POLYGON_MODE_EXT specifies that the polygonMode state
in PipelineRasterizationStateCreateInfo will be
ignored and must be set dynamically with
cmdSetPolygonModeEXT
before any draw call.
|
| pattern DYNAMIC_STATE_DEPTH_CLAMP_ENABLE_EXT :: DynamicState | DYNAMIC_STATE_DEPTH_CLAMP_ENABLE_EXT specifies that the
depthClampEnable state in
PipelineRasterizationStateCreateInfo will be
ignored and must be set dynamically with
cmdSetDepthClampEnableEXT
before any draw call.
|
| pattern DYNAMIC_STATE_TESSELLATION_DOMAIN_ORIGIN_EXT :: DynamicState | DYNAMIC_STATE_TESSELLATION_DOMAIN_ORIGIN_EXT specifies that the
domainOrigin state in
PipelineTessellationDomainOriginStateCreateInfo
will be ignored and must be set dynamically with
cmdSetTessellationDomainOriginEXT
before any draw call.
|
| pattern DYNAMIC_STATE_COLOR_WRITE_ENABLE_EXT :: DynamicState | DYNAMIC_STATE_COLOR_WRITE_ENABLE_EXT specifies that the
pColorWriteEnables state in
PipelineColorWriteCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetColorWriteEnableEXT
before any draw call.
|
| pattern DYNAMIC_STATE_LOGIC_OP_EXT :: DynamicState | DYNAMIC_STATE_LOGIC_OP_EXT specifies that the logicOp state in
PipelineColorBlendStateCreateInfo will be
ignored and must be set dynamically with
cmdSetLogicOpEXT
before any drawing commands.
|
| pattern DYNAMIC_STATE_PATCH_CONTROL_POINTS_EXT :: DynamicState | DYNAMIC_STATE_PATCH_CONTROL_POINTS_EXT specifies that the
patchControlPoints state in
PipelineTessellationStateCreateInfo will be
ignored and must be set dynamically with
cmdSetPatchControlPointsEXT
before any drawing commands.
|
| pattern DYNAMIC_STATE_VERTEX_INPUT_EXT :: DynamicState | DYNAMIC_STATE_VERTEX_INPUT_EXT specifies that the pVertexInputState
state will be ignored and must be set dynamically with
cmdSetVertexInputEXT
before any drawing commands
|
| pattern DYNAMIC_STATE_LINE_STIPPLE_EXT :: DynamicState | DYNAMIC_STATE_LINE_STIPPLE_EXT specifies that the lineStippleFactor
and lineStipplePattern state in
PipelineRasterizationLineStateCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetLineStippleEXT
before any draws are performed with a pipeline state with
PipelineRasterizationLineStateCreateInfoEXT
member stippledLineEnable set to
TRUE.
|
| pattern DYNAMIC_STATE_FRAGMENT_SHADING_RATE_KHR :: DynamicState | DYNAMIC_STATE_FRAGMENT_SHADING_RATE_KHR specifies that state in
PipelineFragmentShadingRateStateCreateInfoKHR
and
PipelineFragmentShadingRateEnumStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetFragmentShadingRateKHR
or
cmdSetFragmentShadingRateEnumNV
before any drawing commands.
|
| pattern DYNAMIC_STATE_EXCLUSIVE_SCISSOR_NV :: DynamicState | DYNAMIC_STATE_EXCLUSIVE_SCISSOR_NV specifies that the
pExclusiveScissors state in
PipelineViewportExclusiveScissorStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetExclusiveScissorNV
before any drawing commands.
|
| pattern DYNAMIC_STATE_EXCLUSIVE_SCISSOR_ENABLE_NV :: DynamicState | DYNAMIC_STATE_EXCLUSIVE_SCISSOR_ENABLE_NV specifies that the the
exclusive scissors must be explicitly enabled with
cmdSetExclusiveScissorEnableNV
and the exclusiveScissorCount value in
PipelineViewportExclusiveScissorStateCreateInfoNV
will not implicitly enable them. This is available on implementations
that support at least specVersion 2 of the VK_NV_scissor_exclusive
extension.
|
| pattern DYNAMIC_STATE_VIEWPORT_COARSE_SAMPLE_ORDER_NV :: DynamicState | DYNAMIC_STATE_VIEWPORT_COARSE_SAMPLE_ORDER_NV specifies that the
coarse sample order state in
PipelineViewportCoarseSampleOrderStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetCoarseSampleOrderNV
before any drawing commands.
|
| pattern DYNAMIC_STATE_VIEWPORT_SHADING_RATE_PALETTE_NV :: DynamicState | DYNAMIC_STATE_VIEWPORT_SHADING_RATE_PALETTE_NV specifies that the
pShadingRatePalettes state in
PipelineViewportShadingRateImageStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetViewportShadingRatePaletteNV
before any drawing commands.
|
| pattern DYNAMIC_STATE_RAY_TRACING_PIPELINE_STACK_SIZE_KHR :: DynamicState | DYNAMIC_STATE_RAY_TRACING_PIPELINE_STACK_SIZE_KHR specifies that the
default stack size computation for the pipeline will be ignored and
must be set dynamically with
cmdSetRayTracingPipelineStackSizeKHR
before any ray tracing calls are performed.
|
| pattern DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT :: DynamicState | DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT specifies that the
sampleLocationsInfo state in
PipelineSampleLocationsStateCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetSampleLocationsEXT
before any draw or clear commands. Enabling custom sample locations is
still indicated by the sampleLocationsEnable member of
PipelineSampleLocationsStateCreateInfoEXT.
|
| pattern DYNAMIC_STATE_DISCARD_RECTANGLE_MODE_EXT :: DynamicState | DYNAMIC_STATE_DISCARD_RECTANGLE_MODE_EXT specifies that the
discardRectangleMode state in
PipelineDiscardRectangleStateCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetDiscardRectangleModeEXT
before any draw commands. This is available on implementations that
support at least specVersion 2 of the VK_EXT_discard_rectangles
extension.
|
| pattern DYNAMIC_STATE_DISCARD_RECTANGLE_ENABLE_EXT :: DynamicState | DYNAMIC_STATE_DISCARD_RECTANGLE_ENABLE_EXT specifies that the presence
of the
PipelineDiscardRectangleStateCreateInfoEXT
structure in the GraphicsPipelineCreateInfo
chain with a discardRectangleCount greater than zero does not
implicitly enable discard rectangles and they must be enabled
dynamically with
cmdSetDiscardRectangleEnableEXT
before any draw commands. This is available on implementations that
support at least specVersion 2 of the VK_EXT_discard_rectangles
extension.
|
| pattern DYNAMIC_STATE_DISCARD_RECTANGLE_EXT :: DynamicState | DYNAMIC_STATE_DISCARD_RECTANGLE_EXT specifies that the
pDiscardRectangles state in
PipelineDiscardRectangleStateCreateInfoEXT
will be ignored and must be set dynamically with
cmdSetDiscardRectangleEXT
before any draw or clear commands.
|
| pattern DYNAMIC_STATE_VIEWPORT_W_SCALING_NV :: DynamicState | DYNAMIC_STATE_VIEWPORT_W_SCALING_NV specifies that the
pViewportWScalings state in
PipelineViewportWScalingStateCreateInfoNV
will be ignored and must be set dynamically with
cmdSetViewportWScalingNV
before any draws are performed with a pipeline state with
PipelineViewportWScalingStateCreateInfoNV
member viewportScalingEnable set to
TRUE
|
| pattern DYNAMIC_STATE_PRIMITIVE_RESTART_ENABLE :: DynamicState | DYNAMIC_STATE_PRIMITIVE_RESTART_ENABLE specifies that the
primitiveRestartEnable state in
PipelineInputAssemblyStateCreateInfo will be
ignored and must be set dynamically with
cmdSetPrimitiveRestartEnable
before any drawing commands.
|
| pattern DYNAMIC_STATE_DEPTH_BIAS_ENABLE :: DynamicState | DYNAMIC_STATE_DEPTH_BIAS_ENABLE specifies that the depthBiasEnable
state in PipelineRasterizationStateCreateInfo
will be ignored and must be set dynamically with
cmdSetDepthBiasEnable
before any drawing commands.
|
| pattern DYNAMIC_STATE_RASTERIZER_DISCARD_ENABLE :: DynamicState | DYNAMIC_STATE_RASTERIZER_DISCARD_ENABLE specifies that the
rasterizerDiscardEnable state in
PipelineRasterizationStateCreateInfo will be
ignored and must be set dynamically with
cmdSetRasterizerDiscardEnable
before any drawing commands.
|
| pattern DYNAMIC_STATE_STENCIL_OP :: DynamicState | DYNAMIC_STATE_STENCIL_OP specifies that the failOp, passOp,
depthFailOp, and compareOp states in
PipelineDepthStencilStateCreateInfo for both
front and back will be ignored and must be set dynamically with
cmdSetStencilOp
before any draws are performed with a pipeline state with
PipelineDepthStencilStateCreateInfo member
stencilTestEnable set to TRUE
|
| pattern DYNAMIC_STATE_STENCIL_TEST_ENABLE :: DynamicState | DYNAMIC_STATE_STENCIL_TEST_ENABLE specifies that the
stencilTestEnable state in
PipelineDepthStencilStateCreateInfo will be
ignored and must be set dynamically with
cmdSetStencilTestEnable
before any draw call.
|
| pattern DYNAMIC_STATE_DEPTH_BOUNDS_TEST_ENABLE :: DynamicState | DYNAMIC_STATE_DEPTH_BOUNDS_TEST_ENABLE specifies that the
depthBoundsTestEnable state in
PipelineDepthStencilStateCreateInfo will be
ignored and must be set dynamically with
cmdSetDepthBoundsTestEnable
before any draw call.
|
| pattern DYNAMIC_STATE_DEPTH_COMPARE_OP :: DynamicState | DYNAMIC_STATE_DEPTH_COMPARE_OP specifies that the depthCompareOp
state in PipelineDepthStencilStateCreateInfo
will be ignored and must be set dynamically with
cmdSetDepthCompareOp
before any draw call.
|
| pattern DYNAMIC_STATE_DEPTH_WRITE_ENABLE :: DynamicState | DYNAMIC_STATE_DEPTH_WRITE_ENABLE specifies that the depthWriteEnable
state in PipelineDepthStencilStateCreateInfo
will be ignored and must be set dynamically with
cmdSetDepthWriteEnable
before any draw call.
|
| pattern DYNAMIC_STATE_DEPTH_TEST_ENABLE :: DynamicState | DYNAMIC_STATE_DEPTH_TEST_ENABLE specifies that the depthTestEnable
state in PipelineDepthStencilStateCreateInfo
will be ignored and must be set dynamically with
cmdSetDepthTestEnable
before any draw call.
|
| pattern DYNAMIC_STATE_VERTEX_INPUT_BINDING_STRIDE :: DynamicState | DYNAMIC_STATE_VERTEX_INPUT_BINDING_STRIDE specifies that the stride
state in VertexInputBindingDescription will be
ignored and must be set dynamically with
cmdBindVertexBuffers2
before any draw call.
|
| pattern DYNAMIC_STATE_SCISSOR_WITH_COUNT :: DynamicState | DYNAMIC_STATE_SCISSOR_WITH_COUNT specifies that the scissorCount and
pScissors state in
PipelineViewportStateCreateInfo will be ignored
and must be set dynamically with
cmdSetScissorWithCount
before any draw call.
|
| pattern DYNAMIC_STATE_VIEWPORT_WITH_COUNT :: DynamicState | DYNAMIC_STATE_VIEWPORT_WITH_COUNT specifies that the viewportCount
and pViewports state in
PipelineViewportStateCreateInfo will be ignored
and must be set dynamically with
cmdSetViewportWithCount
before any draw call.
|
| pattern DYNAMIC_STATE_PRIMITIVE_TOPOLOGY :: DynamicState | DYNAMIC_STATE_PRIMITIVE_TOPOLOGY specifies that the topology state
in PipelineInputAssemblyStateCreateInfo only
specifies the
topology class,
and the specific topology order and adjacency must be set dynamically
with
cmdSetPrimitiveTopology
before any drawing commands.
|
| pattern DYNAMIC_STATE_FRONT_FACE :: DynamicState | DYNAMIC_STATE_FRONT_FACE specifies that the frontFace state in
PipelineRasterizationStateCreateInfo will be
ignored and must be set dynamically with
cmdSetFrontFace
before any drawing commands.
|
| pattern DYNAMIC_STATE_CULL_MODE :: DynamicState | DYNAMIC_STATE_CULL_MODE specifies that the cullMode state in
PipelineRasterizationStateCreateInfo will be
ignored and must be set dynamically with
cmdSetCullMode
before any drawing commands.
|