Vulkan.Core10.Queue

Documentation

getDeviceQueue

Arguments

:: forall io. MonadIO io

=> Device

device is the logical device that owns the queue.

-> ("queueFamilyIndex" ::: Word32)

queueFamilyIndex is the index of the queue family to which the queue belongs.

-> ("queueIndex" ::: Word32)

queueIndex is the index within this queue family of the queue to retrieve.

-> io Queue

vkGetDeviceQueue - Get a queue handle from a device

Description

getDeviceQueue must only be used to get queues that were created with the flags parameter of DeviceQueueCreateInfo set to zero. To get queues that were created with a non-zero flags parameter use getDeviceQueue2.

Valid Usage

• queueFamilyIndex must be one of the queue family indices specified when device was created, via the DeviceQueueCreateInfo structure

• queueIndex must be less than the value of DeviceQueueCreateInfo::queueCount for the queue family indicated by queueFamilyIndex when device was created
• DeviceQueueCreateInfo::flags must have been set to zero when device was created

Valid Usage (Implicit)

• device must be a valid Device handle

• pQueue must be a valid pointer to a Queue handle

See Also

VK_VERSION_1_0, Device, Queue

queueSubmit

Arguments

:: forall io. MonadIO io

=> Queue

queue is the queue that the command buffers will be submitted to.

-> ("submits" ::: Vector (SomeStruct SubmitInfo))

pSubmits is a pointer to an array of SubmitInfo structures, each specifying a command buffer submission batch.

-> Fence

fence is an optional handle to a fence to be signaled once all submitted command buffers have completed execution. If fence is not NULL_HANDLE, it defines a fence signal operation.

-> io ()

vkQueueSubmit - Submits a sequence of semaphores or command buffers to a queue

Description

queueSubmit is a queue submission command, with each batch defined by an element of pSubmits. Batches begin execution in the order they appear in pSubmits, but may complete out of order.

Fence and semaphore operations submitted with queueSubmit have additional ordering constraints compared to other submission commands, with dependencies involving previous and subsequent queue operations. Information about these additional constraints can be found in the semaphore and fence sections of the synchronization chapter.

Details on the interaction of pWaitDstStageMask with synchronization are described in the semaphore wait operation section of the synchronization chapter.

The order that batches appear in pSubmits is used to determine submission order, and thus all the implicit ordering guarantees that respect it. Other than these implicit ordering guarantees and any explicit synchronization primitives, these batches may overlap or otherwise execute out of order.

If any command buffer submitted to this queue is in the executable state, it is moved to the pending state. Once execution of all submissions of a command buffer complete, it moves from the pending state, back to the executable state. If a command buffer was recorded with the COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT flag, it instead moves to the invalid state.

If queueSubmit fails, it may return ERROR_OUT_OF_HOST_MEMORY or ERROR_OUT_OF_DEVICE_MEMORY. If it does, the implementation must ensure that the state and contents of any resources or synchronization primitives referenced by the submitted command buffers and any semaphores referenced by pSubmits is unaffected by the call or its failure. If queueSubmit fails in such a way that the implementation is unable to make that guarantee, the implementation must return ERROR_DEVICE_LOST. See Lost Device.

Valid Usage

• If fence is not NULL_HANDLE, fence must be unsignaled

• If fence is not NULL_HANDLE, fence must not be associated with any other queue command that has not yet completed execution on that queue
• Any calls to cmdSetEvent, cmdResetEvent or cmdWaitEvents that have been recorded into any of the command buffer elements of the pCommandBuffers member of any element of pSubmits, must not reference any Event that is referenced by any of those commands in a command buffer that has been submitted to another queue and is still in the pending state
• Any stage flag included in any element of the pWaitDstStageMask member of any element of pSubmits must be a pipeline stage supported by one of the capabilities of queue, as specified in the table of supported pipeline stages
• Each binary semaphore element of the pSignalSemaphores member of any element of pSubmits must be unsignaled when the semaphore signal operation it defines is executed on the device
• When a semaphore wait operation referring to a binary semaphore defined by any element of the pWaitSemaphores member of any element of pSubmits executes on queue, there must be no other queues waiting on the same semaphore
• All elements of the pWaitSemaphores member of all elements of pSubmits created with a SemaphoreType of SEMAPHORE_TYPE_BINARY must reference a semaphore signal operation that has been submitted for execution and any semaphore signal operations on which it depends (if any) must have also been submitted for execution
• Each element of the pCommandBuffers member of each element of pSubmits must be in the pending or executable state
• If any element of the pCommandBuffers member of any element of pSubmits was not recorded with the COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT, it must not be in the pending state
• Any secondary command buffers recorded into any element of the pCommandBuffers member of any element of pSubmits must be in the pending or executable state
• If any secondary command buffers recorded into any element of the pCommandBuffers member of any element of pSubmits was not recorded with the COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT, it must not be in the pending state
• Each element of the pCommandBuffers member of each element of pSubmits must have been allocated from a CommandPool that was created for the same queue family queue belongs to
• If any element of pSubmits->pCommandBuffers includes a Queue Family Transfer Acquire Operation, there must exist a previously submitted Queue Family Transfer Release Operation on a queue in the queue family identified by the acquire operation, with parameters matching the acquire operation as defined in the definition of such acquire operations, and which happens-before the acquire operation
• If a command recorded into any element of pCommandBuffers was a cmdBeginQuery whose queryPool was created with a queryType of QUERY_TYPE_PERFORMANCE_QUERY_KHR, the profiling lock must have been held continuously on the Device that queue was retrieved from, throughout recording of those command buffers
• Any resource created with SHARING_MODE_EXCLUSIVE that is read by an operation specified by pSubmits must not be owned by any queue family other than the one which queue belongs to, at the time it is executed
• Any resource created with SHARING_MODE_CONCURRENT that is accessed by an operation specified by pSubmits must have included the queue family of queue at resource creation time

Valid Usage (Implicit)

• queue must be a valid Queue handle

• If submitCount is not 0, pSubmits must be a valid pointer to an array of submitCount valid SubmitInfo structures
• If fence is not NULL_HANDLE, fence must be a valid Fence handle
• Both of fence, and queue that are valid handles of non-ignored parameters must have been created, allocated, or retrieved from the same Device

Host Synchronization

• Host access to queue must be externally synchronized

• Host access to fence must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types
-	-	Any

Return Codes

Success

• SUCCESS

Failure

• ERROR_OUT_OF_HOST_MEMORY
• ERROR_OUT_OF_DEVICE_MEMORY
• ERROR_DEVICE_LOST

See Also

VK_VERSION_1_0, Fence, Queue, SubmitInfo

queueWaitIdle

Arguments

:: forall io. MonadIO io

=> Queue

queue is the queue on which to wait.

-> io ()

vkQueueWaitIdle - Wait for a queue to become idle

Description

queueWaitIdle is equivalent to having submitted a valid fence to every previously executed queue submission command that accepts a fence, then waiting for all of those fences to signal using waitForFences with an infinite timeout and waitAll set to TRUE.

Valid Usage (Implicit)

• queue must be a valid Queue handle

Host Synchronization

• Host access to queue must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types
-	-	Any

Return Codes

Success

• SUCCESS

Failure

• ERROR_OUT_OF_HOST_MEMORY
• ERROR_OUT_OF_DEVICE_MEMORY
• ERROR_DEVICE_LOST

See Also

VK_VERSION_1_0, Queue

queueWaitIdleSafe

Arguments

:: forall io. MonadIO io

=> Queue

queue is the queue on which to wait.

-> io ()

A variant of queueWaitIdle which makes a *safe* FFI call

deviceWaitIdle

Arguments

:: forall io. MonadIO io

=> Device

device is the logical device to idle.

-> io ()

vkDeviceWaitIdle - Wait for a device to become idle

Description

deviceWaitIdle is equivalent to calling queueWaitIdle for all queues owned by device.

Valid Usage (Implicit)

• device must be a valid Device handle

Host Synchronization

• Host access to all Queue objects created from device must be externally synchronized

Return Codes

Success

• SUCCESS

Failure

• ERROR_OUT_OF_HOST_MEMORY
• ERROR_OUT_OF_DEVICE_MEMORY
• ERROR_DEVICE_LOST

See Also

VK_VERSION_1_0, Device

deviceWaitIdleSafe

Arguments

:: forall io. MonadIO io

=> Device

device is the logical device to idle.

-> io ()

A variant of deviceWaitIdle which makes a *safe* FFI call

data SubmitInfo (es :: [Type])

VkSubmitInfo - Structure specifying a queue submit operation

Description

The order that command buffers appear in pCommandBuffers is used to determine submission order, and thus all the implicit ordering guarantees that respect it. Other than these implicit ordering guarantees and any explicit synchronization primitives, these command buffers may overlap or otherwise execute out of order.

Valid Usage

• Each element of pCommandBuffers must not have been allocated with COMMAND_BUFFER_LEVEL_SECONDARY

• If the geometry shaders feature is not enabled, each element of pWaitDstStageMask must not contain PIPELINE_STAGE_GEOMETRY_SHADER_BIT
• If the tessellation shaders feature is not enabled, each element of pWaitDstStageMask must not contain PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT or PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT
• Each element of pWaitDstStageMask must not include PIPELINE_STAGE_HOST_BIT
• If any element of pWaitSemaphores or pSignalSemaphores was created with a SemaphoreType of SEMAPHORE_TYPE_TIMELINE, then the pNext chain must include a TimelineSemaphoreSubmitInfo structure
• If the pNext chain of this structure includes a TimelineSemaphoreSubmitInfo structure and any element of pWaitSemaphores was created with a SemaphoreType of SEMAPHORE_TYPE_TIMELINE, then its waitSemaphoreValueCount member must equal waitSemaphoreCount
• If the pNext chain of this structure includes a TimelineSemaphoreSubmitInfo structure and any element of pSignalSemaphores was created with a SemaphoreType of SEMAPHORE_TYPE_TIMELINE, then its signalSemaphoreValueCount member must equal signalSemaphoreCount
• For each element of pSignalSemaphores created with a SemaphoreType of SEMAPHORE_TYPE_TIMELINE the corresponding element of TimelineSemaphoreSubmitInfo::pSignalSemaphoreValues must have a value greater than the current value of the semaphore when the semaphore signal operation is executed
• For each element of pWaitSemaphores created with a SemaphoreType of SEMAPHORE_TYPE_TIMELINE the corresponding element of TimelineSemaphoreSubmitInfo::pWaitSemaphoreValues must have a value which does not differ from the current value of the semaphore or the value of any outstanding semaphore wait or signal operation on that semaphore by more than maxTimelineSemaphoreValueDifference
• For each element of pSignalSemaphores created with a SemaphoreType of SEMAPHORE_TYPE_TIMELINE the corresponding element of TimelineSemaphoreSubmitInfo::pSignalSemaphoreValues must have a value which does not differ from the current value of the semaphore or the value of any outstanding semaphore wait or signal operation on that semaphore by more than maxTimelineSemaphoreValueDifference
• If the mesh shaders feature is not enabled, each element of pWaitDstStageMask must not contain PIPELINE_STAGE_MESH_SHADER_BIT_NV
• If the task shaders feature is not enabled, each element of pWaitDstStageMask must not contain PIPELINE_STAGE_TASK_SHADER_BIT_NV
• If the pNext chain of this structure does not include a ProtectedSubmitInfo structure with protectedSubmit set to TRUE, then each element of the pCommandBuffers array must be an unprotected command buffer
• If the pNext chain of this structure includes a ProtectedSubmitInfo structure with protectedSubmit set to TRUE, then each element of the pCommandBuffers array must be a protected command buffer
• If pCommandBuffers contains any resumed render pass instances, they must be suspended by a render pass instance earlier in submission order within pCommandBuffers
• If pCommandBuffers contains any suspended render pass instances, they must be resumed by a render pass instance later in submission order within pCommandBuffers
• If pCommandBuffers contains any suspended render pass instances, there must be no action or synchronization commands between that render pass instance and the render pass instance that resumes it
• If pCommandBuffers contains any suspended render pass instances, there must be no render pass instances between that render pass instance and the render pass instance that resumes it
• If the variableSampleLocations limit is not supported, and any element of pCommandBuffers contains any suspended render pass instances, where a graphics pipeline has been bound, any pipelines bound in the render pass instance that resumes it, or any subsequent render pass instances that resume from that one and so on, must use the same sample locations

Valid Usage (Implicit)

• sType must be STRUCTURE_TYPE_SUBMIT_INFO

• Each pNext member of any structure (including this one) in the pNext chain must be either NULL or a pointer to a valid instance of D3D12FenceSubmitInfoKHR, DeviceGroupSubmitInfo, PerformanceQuerySubmitInfoKHR, ProtectedSubmitInfo, TimelineSemaphoreSubmitInfo, Win32KeyedMutexAcquireReleaseInfoKHR, or Win32KeyedMutexAcquireReleaseInfoNV
• The sType value of each struct in the pNext chain must be unique
• If waitSemaphoreCount is not 0, pWaitSemaphores must be a valid pointer to an array of waitSemaphoreCount valid Semaphore handles
• If waitSemaphoreCount is not 0, pWaitDstStageMask must be a valid pointer to an array of waitSemaphoreCount valid combinations of PipelineStageFlagBits values
• Each element of pWaitDstStageMask must not be 0
• If commandBufferCount is not 0, pCommandBuffers must be a valid pointer to an array of commandBufferCount valid CommandBuffer handles
• If signalSemaphoreCount is not 0, pSignalSemaphores must be a valid pointer to an array of signalSemaphoreCount valid Semaphore handles
• Each of the elements of pCommandBuffers, the elements of pSignalSemaphores, and the elements of pWaitSemaphores that are valid handles of non-ignored parameters must have been created, allocated, or retrieved from the same Device

See Also

VK_VERSION_1_0, CommandBuffer, PipelineStageFlags, Semaphore, StructureType, queueSubmit

Constructors

SubmitInfo

Fields

• next :: Chain es

  pNext is NULL or a pointer to a structure extending this structure.

• waitSemaphores :: Vector Semaphore

  pWaitSemaphores is a pointer to an array of Semaphore handles upon which to wait before the command buffers for this batch begin execution. If semaphores to wait on are provided, they define a semaphore wait operation.

• waitDstStageMask :: Vector PipelineStageFlags

  pWaitDstStageMask is a pointer to an array of pipeline stages at which each corresponding semaphore wait will occur.

• commandBuffers :: Vector (Ptr CommandBuffer_T)

  pCommandBuffers is a pointer to an array of CommandBuffer handles to execute in the batch.

• signalSemaphores :: Vector Semaphore

  pSignalSemaphores is a pointer to an array of Semaphore handles which will be signaled when the command buffers for this batch have completed execution. If semaphores to be signaled are provided, they define a semaphore signal operation.

Instances

Extensible SubmitInfo

Defined in Vulkan.Core10.Queue

Methods

extensibleTypeName :: String

getNext :: forall (es :: [Type]). SubmitInfo es -> Chain es

setNext :: forall (ds :: [Type]) (es :: [Type]). SubmitInfo ds -> Chain es -> SubmitInfo es

extends :: forall e b proxy. Typeable e => proxy e -> (Extends SubmitInfo e => b) -> Maybe b

Show (Chain es) => Show (SubmitInfo es)

Defined in Vulkan.Core10.Queue

Methods

showsPrec :: Int -> SubmitInfo es -> ShowS

show :: SubmitInfo es -> String

showList :: [SubmitInfo es] -> ShowS

(Extendss SubmitInfo es, PeekChain es) => FromCStruct (SubmitInfo es)

Defined in Vulkan.Core10.Queue

Methods

peekCStruct :: Ptr (SubmitInfo es) -> IO (SubmitInfo es)

(Extendss SubmitInfo es, PokeChain es) => ToCStruct (SubmitInfo es)

Defined in Vulkan.Core10.Queue

Methods

withCStruct :: SubmitInfo es -> (Ptr (SubmitInfo es) -> IO b) -> IO b

pokeCStruct :: Ptr (SubmitInfo es) -> SubmitInfo es -> IO b -> IO b

withZeroCStruct :: (Ptr (SubmitInfo es) -> IO b) -> IO b

pokeZeroCStruct :: Ptr (SubmitInfo es) -> IO b -> IO b

cStructSize :: Int

cStructAlignment :: Int

es ~ ('[] :: [Type]) => Zero (SubmitInfo es)

Defined in Vulkan.Core10.Queue

Methods

zero :: SubmitInfo es

data Queue

VkQueue - Opaque handle to a queue object

See Also

VK_VERSION_1_0, getDeviceQueue, getDeviceQueue2, getQueueCheckpointData2NV, getQueueCheckpointDataNV, queueBeginDebugUtilsLabelEXT, queueBindSparse, queueEndDebugUtilsLabelEXT, queueInsertDebugUtilsLabelEXT, queuePresentKHR, queueSetPerformanceConfigurationINTEL, queueSubmit, queueSubmit2KHR, queueWaitIdle

Constructors

Queue

Fields

• queueHandle :: Ptr Queue_T
• deviceCmds :: DeviceCmds

Instances

Eq Queue

Defined in Vulkan.Core10.Handles

Methods

(==) :: Queue -> Queue -> Bool

(/=) :: Queue -> Queue -> Bool

Show Queue

Defined in Vulkan.Core10.Handles

Methods

showsPrec :: Int -> Queue -> ShowS

show :: Queue -> String

showList :: [Queue] -> ShowS

Zero Queue

Defined in Vulkan.Core10.Handles

Methods

zero :: Queue

HasObjectType Queue

Defined in Vulkan.Core10.Handles

Methods

objectTypeAndHandle :: Queue -> (ObjectType, Word64)

IsHandle Queue

Defined in Vulkan.Core10.Handles

newtype PipelineStageFlagBits

VkPipelineStageFlagBits - Bitmask specifying pipeline stages

Description

These values all have the same meaning as the equivalently named values for PipelineStageFlags2KHR.

See Also

VK_VERSION_1_0, CheckpointDataNV, PipelineStageFlags, cmdWriteBufferMarkerAMD, cmdWriteTimestamp

Constructors

PipelineStageFlagBits Flags

Bundled Patterns

pattern PIPELINE_STAGE_TOP_OF_PIPE_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_TOP_OF_PIPE_BIT is equivalent to PIPELINE_STAGE_ALL_COMMANDS_BIT with AccessFlags set to 0 when specified in the second synchronization scope, but specifies no stage of execution when specified in the first scope.

pattern PIPELINE_STAGE_DRAW_INDIRECT_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_DRAW_INDIRECT_BIT specifies the stage of the pipeline where VkDrawIndirect* / VkDispatchIndirect* / VkTraceRaysIndirect* data structures are consumed. This stage also includes reading commands written by cmdExecuteGeneratedCommandsNV.

pattern PIPELINE_STAGE_VERTEX_INPUT_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_VERTEX_INPUT_BIT specifies the stage of the pipeline where vertex and index buffers are consumed.

pattern PIPELINE_STAGE_VERTEX_SHADER_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_VERTEX_SHADER_BIT specifies the vertex shader stage.

pattern PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT specifies the tessellation control shader stage.

pattern PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT specifies the tessellation evaluation shader stage.

pattern PIPELINE_STAGE_GEOMETRY_SHADER_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_GEOMETRY_SHADER_BIT specifies the geometry shader stage.

pattern PIPELINE_STAGE_FRAGMENT_SHADER_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_FRAGMENT_SHADER_BIT specifies the fragment shader stage.

pattern PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT specifies the stage of the pipeline where early fragment tests (depth and stencil tests before fragment shading) are performed. This stage also includes subpass load operations for framebuffer attachments with a depth/stencil format.

pattern PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT specifies the stage of the pipeline where late fragment tests (depth and stencil tests after fragment shading) are performed. This stage also includes subpass store operations for framebuffer attachments with a depth/stencil format.

pattern PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT specifies the stage of the pipeline after blending where the final color values are output from the pipeline. This stage also includes subpass load and store operations and multisample resolve operations for framebuffer attachments with a color or depth/stencil format.

pattern PIPELINE_STAGE_COMPUTE_SHADER_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_COMPUTE_SHADER_BIT specifies the execution of a compute shader.

pattern PIPELINE_STAGE_TRANSFER_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_TRANSFER_BIT specifies the following commands:

• All copy commands, including cmdCopyQueryPoolResults
• cmdBlitImage2KHR and cmdBlitImage
• cmdResolveImage2KHR and cmdResolveImage
• All clear commands, with the exception of cmdClearAttachments

pattern PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT is equivalent to PIPELINE_STAGE_ALL_COMMANDS_BIT with AccessFlags set to 0 when specified in the first synchronization scope, but specifies no stage of execution when specified in the second scope.

pattern PIPELINE_STAGE_HOST_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_HOST_BIT specifies a pseudo-stage indicating execution on the host of reads/writes of device memory. This stage is not invoked by any commands recorded in a command buffer.

pattern PIPELINE_STAGE_ALL_GRAPHICS_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_ALL_GRAPHICS_BIT specifies the execution of all graphics pipeline stages, and is equivalent to the logical OR of:

• PIPELINE_STAGE_DRAW_INDIRECT_BIT
• PIPELINE_STAGE_TASK_SHADER_BIT_NV
• PIPELINE_STAGE_MESH_SHADER_BIT_NV
• PIPELINE_STAGE_VERTEX_INPUT_BIT
• PIPELINE_STAGE_VERTEX_SHADER_BIT
• PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT
• PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT
• PIPELINE_STAGE_GEOMETRY_SHADER_BIT
• PIPELINE_STAGE_FRAGMENT_SHADER_BIT
• PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT
• PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT
• PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT
• PIPELINE_STAGE_CONDITIONAL_RENDERING_BIT_EXT
• PIPELINE_STAGE_TRANSFORM_FEEDBACK_BIT_EXT
• PIPELINE_STAGE_FRAGMENT_SHADING_RATE_ATTACHMENT_BIT_KHR
• PIPELINE_STAGE_FRAGMENT_DENSITY_PROCESS_BIT_EXT

pattern PIPELINE_STAGE_ALL_COMMANDS_BIT :: PipelineStageFlagBits

PIPELINE_STAGE_ALL_COMMANDS_BIT specifies all operations performed by all commands supported on the queue it is used with.

pattern PIPELINE_STAGE_NONE_KHR :: PipelineStageFlagBits

PIPELINE_STAGE_NONE_KHR specifies no stages of execution.

pattern PIPELINE_STAGE_COMMAND_PREPROCESS_BIT_NV :: PipelineStageFlagBits

PIPELINE_STAGE_COMMAND_PREPROCESS_BIT_NV specifies the stage of the pipeline where device-side preprocessing for generated commands via cmdPreprocessGeneratedCommandsNV is handled.

pattern PIPELINE_STAGE_FRAGMENT_SHADING_RATE_ATTACHMENT_BIT_KHR :: PipelineStageFlagBits

PIPELINE_STAGE_FRAGMENT_SHADING_RATE_ATTACHMENT_BIT_KHR specifies the stage of the pipeline where the fragment shading rate attachment or shading rate image is read to determine the fragment shading rate for portions of a rasterized primitive.

pattern PIPELINE_STAGE_FRAGMENT_DENSITY_PROCESS_BIT_EXT :: PipelineStageFlagBits

PIPELINE_STAGE_FRAGMENT_DENSITY_PROCESS_BIT_EXT specifies the stage of the pipeline where the fragment density map is read to generate the fragment areas.

pattern PIPELINE_STAGE_MESH_SHADER_BIT_NV :: PipelineStageFlagBits

PIPELINE_STAGE_MESH_SHADER_BIT_NV specifies the mesh shader stage.

pattern PIPELINE_STAGE_TASK_SHADER_BIT_NV :: PipelineStageFlagBits

PIPELINE_STAGE_TASK_SHADER_BIT_NV specifies the task shader stage.

pattern PIPELINE_STAGE_RAY_TRACING_SHADER_BIT_KHR :: PipelineStageFlagBits

PIPELINE_STAGE_RAY_TRACING_SHADER_BIT_KHR specifies the execution of the ray tracing shader stages, via cmdTraceRaysNV , cmdTraceRaysKHR, or cmdTraceRaysIndirectKHR

pattern PIPELINE_STAGE_ACCELERATION_STRUCTURE_BUILD_BIT_KHR :: PipelineStageFlagBits

PIPELINE_STAGE_ACCELERATION_STRUCTURE_BUILD_BIT_KHR specifies the execution of cmdBuildAccelerationStructureNV, cmdCopyAccelerationStructureNV, cmdWriteAccelerationStructuresPropertiesNV , cmdBuildAccelerationStructuresKHR, cmdBuildAccelerationStructuresIndirectKHR, cmdCopyAccelerationStructureKHR, cmdCopyAccelerationStructureToMemoryKHR, cmdCopyMemoryToAccelerationStructureKHR, and cmdWriteAccelerationStructuresPropertiesKHR.

pattern PIPELINE_STAGE_CONDITIONAL_RENDERING_BIT_EXT :: PipelineStageFlagBits

PIPELINE_STAGE_CONDITIONAL_RENDERING_BIT_EXT specifies the stage of the pipeline where the predicate of conditional rendering is consumed.

pattern PIPELINE_STAGE_TRANSFORM_FEEDBACK_BIT_EXT :: PipelineStageFlagBits

PIPELINE_STAGE_TRANSFORM_FEEDBACK_BIT_EXT specifies the stage of the pipeline where vertex attribute output values are written to the transform feedback buffers.

Instances

Eq PipelineStageFlagBits

Defined in Vulkan.Core10.Enums.PipelineStageFlagBits

Methods

(==) :: PipelineStageFlagBits -> PipelineStageFlagBits -> Bool

(/=) :: PipelineStageFlagBits -> PipelineStageFlagBits -> Bool

Ord PipelineStageFlagBits

Defined in Vulkan.Core10.Enums.PipelineStageFlagBits

Methods

compare :: PipelineStageFlagBits -> PipelineStageFlagBits -> Ordering

(<) :: PipelineStageFlagBits -> PipelineStageFlagBits -> Bool

(<=) :: PipelineStageFlagBits -> PipelineStageFlagBits -> Bool

(>) :: PipelineStageFlagBits -> PipelineStageFlagBits -> Bool

(>=) :: PipelineStageFlagBits -> PipelineStageFlagBits -> Bool

max :: PipelineStageFlagBits -> PipelineStageFlagBits -> PipelineStageFlagBits

min :: PipelineStageFlagBits -> PipelineStageFlagBits -> PipelineStageFlagBits

Read PipelineStageFlagBits

Defined in Vulkan.Core10.Enums.PipelineStageFlagBits

Methods

readsPrec :: Int -> ReadS PipelineStageFlagBits

readList :: ReadS [PipelineStageFlagBits]

readPrec :: ReadPrec PipelineStageFlagBits

readListPrec :: ReadPrec [PipelineStageFlagBits]

Show PipelineStageFlagBits

Defined in Vulkan.Core10.Enums.PipelineStageFlagBits

Methods

showsPrec :: Int -> PipelineStageFlagBits -> ShowS

show :: PipelineStageFlagBits -> String

showList :: [PipelineStageFlagBits] -> ShowS

Storable PipelineStageFlagBits

Defined in Vulkan.Core10.Enums.PipelineStageFlagBits

Methods

sizeOf :: PipelineStageFlagBits -> Int

alignment :: PipelineStageFlagBits -> Int

peekElemOff :: Ptr PipelineStageFlagBits -> Int -> IO PipelineStageFlagBits

pokeElemOff :: Ptr PipelineStageFlagBits -> Int -> PipelineStageFlagBits -> IO ()

peekByteOff :: Ptr b -> Int -> IO PipelineStageFlagBits

pokeByteOff :: Ptr b -> Int -> PipelineStageFlagBits -> IO ()

peek :: Ptr PipelineStageFlagBits -> IO PipelineStageFlagBits

poke :: Ptr PipelineStageFlagBits -> PipelineStageFlagBits -> IO ()

Bits PipelineStageFlagBits

Defined in Vulkan.Core10.Enums.PipelineStageFlagBits

Methods

(.&.) :: PipelineStageFlagBits -> PipelineStageFlagBits -> PipelineStageFlagBits

(.|.) :: PipelineStageFlagBits -> PipelineStageFlagBits -> PipelineStageFlagBits

xor :: PipelineStageFlagBits -> PipelineStageFlagBits -> PipelineStageFlagBits

complement :: PipelineStageFlagBits -> PipelineStageFlagBits

shift :: PipelineStageFlagBits -> Int -> PipelineStageFlagBits

rotate :: PipelineStageFlagBits -> Int -> PipelineStageFlagBits

zeroBits :: PipelineStageFlagBits

bit :: Int -> PipelineStageFlagBits

setBit :: PipelineStageFlagBits -> Int -> PipelineStageFlagBits

clearBit :: PipelineStageFlagBits -> Int -> PipelineStageFlagBits

complementBit :: PipelineStageFlagBits -> Int -> PipelineStageFlagBits

testBit :: PipelineStageFlagBits -> Int -> Bool

bitSizeMaybe :: PipelineStageFlagBits -> Maybe Int

bitSize :: PipelineStageFlagBits -> Int

isSigned :: PipelineStageFlagBits -> Bool

shiftL :: PipelineStageFlagBits -> Int -> PipelineStageFlagBits

unsafeShiftL :: PipelineStageFlagBits -> Int -> PipelineStageFlagBits

shiftR :: PipelineStageFlagBits -> Int -> PipelineStageFlagBits

unsafeShiftR :: PipelineStageFlagBits -> Int -> PipelineStageFlagBits

rotateL :: PipelineStageFlagBits -> Int -> PipelineStageFlagBits

rotateR :: PipelineStageFlagBits -> Int -> PipelineStageFlagBits

popCount :: PipelineStageFlagBits -> Int

FiniteBits PipelineStageFlagBits

Defined in Vulkan.Core10.Enums.PipelineStageFlagBits

Methods

finiteBitSize :: PipelineStageFlagBits -> Int

countLeadingZeros :: PipelineStageFlagBits -> Int

countTrailingZeros :: PipelineStageFlagBits -> Int

Zero PipelineStageFlagBits

Defined in Vulkan.Core10.Enums.PipelineStageFlagBits

Methods

zero :: PipelineStageFlagBits

type PipelineStageFlags = PipelineStageFlagBits