Retrie is a powerful, easy-to-use codemodding tool for Haskell.
Install
cabal update
cabal install retrie
Example
Assume you have some code, including functions like foo
:
module MyModule where
foo :: [Int] -> [Int]
foo ints = map bar (map baz ints)
Someone points out that traversing the list ints
twice is slower than doing it once. You could fix the code by hand, or you could rewrite it with retrie:
retrie --adhoc "forall f g xs. map f (map g xs) = map (f . g) xs"
Retrie applies the equation as a rewrite to all the Haskell modules it finds in the current directory:
module MyModule where
foo :: [Int] -> [Int]
-foo ints = map bar (map baz ints)
+foo ints = map (bar . baz) ints
Of course, now you might find this code more difficult to understand. You also learn that GHC will do this sort of optimization automatically, so you decide to undo your rewrite:
retrie --adhoc "forall f g xs. map (f . g) xs = map f (map g xs)"
Now you have your original code back.
Other Sources Of Equations
- The
--adhoc
flag, above, admits anything you can specify in a RULES
pragma.
- You can apply actual
RULES
pragmas, in either direction, with --rule-forward
and --rule-backward
.
- Since definitions in Haskell are themselves equations, you can unfold (or inline) function definitions with
--unfold
. You can also fold a function definition with --fold
, replacing an instance of the function's body with a call to that function.
- Type synonyms are also equations. You can apply type synonyms in either direction using
--type-forward
and --type-backward
.
To try some examples, put the following into MyModule2.hs
:
module MyModule2 where
maybe :: b -> (a -> b) -> Maybe a -> b
maybe d f mb = case mb of
Nothing -> d
Just x -> f x
type MyMaybe = Maybe Int
{-# RULES "myRule" forall x. maybe Nothing Just x = x #-}
foo :: Maybe Int
foo = maybe Nothing Just (Just 5)
Then try the following rewrites and check the contents of the module after each step:
retrie --type-backward MyModule2.MyMaybe
module MyModule2 where
maybe :: b -> (a -> b) -> Maybe a -> b
maybe d f mb = case mb of
Nothing -> d
Just x -> f x
type MyMaybe = Maybe Int
{-# RULES "myRule" forall x. maybe Nothing Just x = x #-}
-foo :: Maybe Int
+foo :: MyMaybe
foo = maybe Nothing Just (Just 5)
retrie --unfold MyModule2.maybe
module MyModule2 where
maybe :: b -> (a -> b) -> Maybe a -> b
maybe d f mb = case mb of
Nothing -> d
Just x -> f x
type MyMaybe = Maybe Int
-{-# RULES "myRule" forall x. maybe Nothing Just x = x #-}
+{-# RULES "myRule" forall x. case x of
+ Nothing -> Nothing
+ Just x1 -> Just x1 = x #-}
foo :: MyMaybe
-foo = maybe Nothing Just (Just 5)
+foo = case Just 5 of
+ Nothing -> Nothing
+ Just x -> Just x
retrie --fold MyModule2.maybe
module MyModule2 where
maybe :: b -> (a -> b) -> Maybe a -> b
maybe d f mb = case mb of
Nothing -> d
Just x -> f x
type MyMaybe = Maybe Int
-{-# RULES "myRule" forall x. case x of
- Nothing -> Nothing
- Just x1 -> Just x1 = x #-}
+{-# RULES "myRule" forall x. maybe Nothing Just x = x #-}
foo :: MyMaybe
-foo = case Just 5 of
- Nothing -> Nothing
- Just x -> Just x
+foo = maybe Nothing Just (Just 5)
retrie --rule-forward MyModule2.myRule
module MyModule2 where
maybe :: b -> (a -> b) -> Maybe a -> b
maybe d f mb = case mb of
Nothing -> d
Just x -> f x
type MyMaybe = Maybe Int
{-# RULES "myRule" forall x. maybe Nothing Just x = x #-}
foo :: MyMaybe
-foo = maybe Nothing Just (Just 5)
+foo = Just 5
retrie --type-forward MyModule2.MyMaybe
module MyModule2 where
maybe :: b -> (a -> b) -> Maybe a -> b
maybe d f mb = case mb of
Nothing -> d
Just x -> f x
type MyMaybe = Maybe Int
{-# RULES "myRule" forall x. maybe Nothing Just x = x #-}
-foo :: MyMaybe
+foo :: Maybe Int
foo = Just 5
Motivation
Refactoring tools fall on a spectrum. At one end is simple string replacement (grep
and sed
). At the other is parsing an abstract-syntax tree (AST) and directly manipulating it. Broadly, the tradeoffs are:
-
String manipulation
- Hard to write: Essentially need to hand-roll a parser using a regular expression.
- Limited power: Find and replace.
- Fast.
-
AST manipulation
- Hard to write: Requires extensive domain knowledge about language/parser.
- Very powerful.
- Slow: Parsing and traversing large codebases is expensive.
Retrie finds a middle ground:
- Easy to write: Equations are defined using syntax of target language.
- Powerful:
- Equations are more powerful than regular expressions.
- Rewrites can be scripted and enforce side-conditions (see below).
- Fast: Search space is narrowed using
grep
before parsing. Time is (morally) proportional to the number of matches, not the number of target files.
Features
- Power
- Can rewrite expressions, types, and patterns.
- Matching is up to alpha-equivalence.
- Rewrites are equational: a quantifier that appears twice in the left-hand side must match the same expression (up to alpha-equivalence).
- Inserts imports. (As specified by the user, and automatically in some cases.)
- Rewrites can be scripted and have side conditions.
- Uses GHC's parser, so supports all of the de facto Haskell language.
- Correctness
- Local scoping is respected. (Will not introduce shadowing/capture bugs.)
- Impossible to match/rewrite an incomplete expression fragment.
- Parentheses are automatically removed/inserted as needed.
- Whitespace
- Whitespace is ignored when matching. No fiddling with
\s
.
- Whitespace is preserved in resulting expression.
- Will not rewrite in comments. Existing comments are preserved.
- Respects git/hg ignore files.
See retrie --help
for a complete list of options.
Scripting and Side Conditions
Retrie can be used as a library to tackle more complex rewrites.
Consider the task of changing the argument type of a function from String
to an enumeration:
fooOld :: String -> IO ()
data FooArg = Foo | Bar
fooNew :: FooArg -> IO ()
Retrie provides a small monadic DSL for scripting the application of rewrites. It also allows you to intercept and manipulate the result of matching the left-hand side of an equation. Putting those two together, you could implement the following refactoring:
{-# LANGUAGE OverloadedStrings #-}
module Main where
import Retrie
main :: IO ()
main = runScript $ \opts ->
[rewrite] <- parseRewrites opts [Adhoc "forall arg. fooOld arg = fooNew arg"]
return $ apply [setRewriteTransformer stringToFooArg rewrite]
argMapping :: [(FastString, String)]
argMapping = [("foo", "Foo"), ("bar", "Bar")]
stringToFooArg :: MatchResultTransformer
stringToFooArg _ctxt match
| MatchResult substitution template <- match
, Just (HoleExpr expr) <- lookupSubst "arg" substitution
, L _ (HsLit _ (HsString _ str)) <- astA expr = do
newExpr <- case lookup str argMapping of
Nothing ->
parseExpr $ "error \"invalid argument: " ++ unpackFS str ++ "\""
Just constructor -> parseExpr constructor
return $
MatchResult (extendSubst substitution "arg" (HoleExpr newExpr)) template
| otherwise = return NoMatch
Running this program would create the following diff:
module MyModule3 where
baz, bar, quux :: IO ()
-baz = fooOld "foo"
+baz = fooNew Foo
-bar = fooOld "bar"
+bar = fooNew Bar
-quux = fooOld "quux"
+quux = fooNew (error "invalid argument: quux")
Defining the stringToFooArg
function requires knowledge of both the Retrie library and GHC's internal AST types. You'll find haddock/hoogle invaluable for both.
Reporting Bugs/Submitting Patches
To report a bug in the result of a rewrite, please create a test case (example) and submit it as an issue or merge request.
To report other bugs, please create a GitHub issue.
License
Retrie is MIT licensed, as found in the LICENSE file.